aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/b43/main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/b43/main.c')
-rw-r--r--drivers/net/wireless/b43/main.c51
1 files changed, 39 insertions, 12 deletions
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index c79e6638c88d..1b988f26bdf1 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2437,6 +2437,7 @@ start_ieee80211:
err = ieee80211_register_hw(wl->hw);
if (err)
goto err_one_core_detach;
+ wl->hw_registred = true;
b43_leds_register(wl->current_dev);
goto out;
@@ -3766,7 +3767,7 @@ static int b43_switch_band(struct b43_wl *wl, struct ieee80211_channel *chan)
if (prev_status >= B43_STAT_STARTED) {
err = b43_wireless_core_start(up_dev);
if (err) {
- b43err(wl, "Fatal: Coult not start device for "
+ b43err(wl, "Fatal: Could not start device for "
"selected %s-GHz band\n",
band_to_string(chan->band));
b43_wireless_core_exit(up_dev);
@@ -4010,6 +4011,20 @@ static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
if (modparam_nohwcrypt)
return -ENOSPC; /* User disabled HW-crypto */
+ if ((vif->type == NL80211_IFTYPE_ADHOC ||
+ vif->type == NL80211_IFTYPE_MESH_POINT) &&
+ (key->cipher == WLAN_CIPHER_SUITE_TKIP ||
+ key->cipher == WLAN_CIPHER_SUITE_CCMP) &&
+ !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
+ /*
+ * For now, disable hw crypto for the RSN IBSS group keys. This
+ * could be optimized in the future, but until that gets
+ * implemented, use of software crypto for group addressed
+ * frames is a acceptable to allow RSN IBSS to be used.
+ */
+ return -EOPNOTSUPP;
+ }
+
mutex_lock(&wl->mutex);
dev = wl->current_dev;
@@ -4827,8 +4842,14 @@ static int b43_op_start(struct ieee80211_hw *hw)
out_mutex_unlock:
mutex_unlock(&wl->mutex);
- /* reload configuration */
- b43_op_config(hw, ~0);
+ /*
+ * Configuration may have been overwritten during initialization.
+ * Reload the configuration, but only if initialization was
+ * successful. Reloading the configuration after a failed init
+ * may hang the system.
+ */
+ if (!err)
+ b43_op_config(hw, ~0);
return err;
}
@@ -5223,10 +5244,10 @@ static void b43_sprom_fixup(struct ssb_bus *bus)
/* boardflags workarounds */
if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL &&
- bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74)
+ bus->chip_id == 0x4301 && bus->sprom.board_rev == 0x74)
bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST;
if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
- bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40)
+ bus->boardinfo.type == 0x4E && bus->sprom.board_rev > 0x40)
bus->sprom.boardflags_lo |= B43_BFL_PACTRL;
if (bus->bustype == SSB_BUSTYPE_PCI) {
pdev = bus->host_pci;
@@ -5275,8 +5296,11 @@ static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev)
BIT(NL80211_IFTYPE_WDS) |
BIT(NL80211_IFTYPE_ADHOC);
+ hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+
hw->queues = modparam_qos ? B43_QOS_QUEUE_NUM : 1;
wl->mac80211_initially_registered_queues = hw->queues;
+ wl->hw_registred = false;
hw->max_rates = 2;
SET_IEEE80211_DEV(hw, dev->dev);
if (is_valid_ether_addr(sprom->et1mac))
@@ -5348,12 +5372,15 @@ static void b43_bcma_remove(struct bcma_device *core)
* as the ieee80211 unreg will destroy the workqueue. */
cancel_work_sync(&wldev->restart_work);
- /* Restore the queues count before unregistering, because firmware detect
- * might have modified it. Restoring is important, so the networking
- * stack can properly free resources. */
- wl->hw->queues = wl->mac80211_initially_registered_queues;
- b43_leds_stop(wldev);
- ieee80211_unregister_hw(wl->hw);
+ B43_WARN_ON(!wl);
+ if (wl->current_dev == wldev && wl->hw_registred) {
+ /* Restore the queues count before unregistering, because firmware detect
+ * might have modified it. Restoring is important, so the networking
+ * stack can properly free resources. */
+ wl->hw->queues = wl->mac80211_initially_registered_queues;
+ b43_leds_stop(wldev);
+ ieee80211_unregister_hw(wl->hw);
+ }
b43_one_core_detach(wldev->dev);
@@ -5424,7 +5451,7 @@ static void b43_ssb_remove(struct ssb_device *sdev)
cancel_work_sync(&wldev->restart_work);
B43_WARN_ON(!wl);
- if (wl->current_dev == wldev) {
+ if (wl->current_dev == wldev && wl->hw_registred) {
/* Restore the queues count before unregistering, because firmware detect
* might have modified it. Restoring is important, so the networking
* stack can properly free resources. */