1 files changed, 0 insertions, 489 deletions

diff --git a/drivers/net/wireless/intersil/prism54/islpci_eth.c b/drivers/net/wireless/intersil/prism54/islpci_eth.c
deleted file mode 100644
index 74dd65716afd..000000000000
--- a/drivers/net/wireless/intersil/prism54/islpci_eth.c
+++ /dev/null
@@ -1,489 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2002 Intersil Americas Inc.
- *  Copyright (C) 2004 Aurelien Alleaume <slts@free.fr>
- */
-
-#include <linux/module.h>
-#include <linux/gfp.h>
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/if_arp.h>
-#include <asm/byteorder.h>
-
-#include "prismcompat.h"
-#include "isl_38xx.h"
-#include "islpci_eth.h"
-#include "islpci_mgt.h"
-#include "oid_mgt.h"
-
-/******************************************************************************
-    Network Interface functions
-******************************************************************************/
-void
-islpci_eth_cleanup_transmit(islpci_private *priv,
-			    isl38xx_control_block *control_block)
-{
-	struct sk_buff *skb;
-	u32 index;
-
-	/* compare the control block read pointer with the free pointer */
-	while (priv->free_data_tx !=
-	       le32_to_cpu(control_block->
-			   device_curr_frag[ISL38XX_CB_TX_DATA_LQ])) {
-		/* read the index of the first fragment to be freed */
-		index = priv->free_data_tx % ISL38XX_CB_TX_QSIZE;
-
-		/* check for holes in the arrays caused by multi fragment frames
-		 * searching for the last fragment of a frame */
-		if (priv->pci_map_tx_address[index]) {
-			/* entry is the last fragment of a frame
-			 * free the skb structure and unmap pci memory */
-			skb = priv->data_low_tx[index];
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-			DEBUG(SHOW_TRACING,
-			      "cleanup skb %p skb->data %p skb->len %u truesize %u\n",
-			      skb, skb->data, skb->len, skb->truesize);
-#endif
-
-			dma_unmap_single(&priv->pdev->dev,
-					 priv->pci_map_tx_address[index],
-					 skb->len, DMA_TO_DEVICE);
-			dev_kfree_skb_irq(skb);
-			skb = NULL;
-		}
-		/* increment the free data low queue pointer */
-		priv->free_data_tx++;
-	}
-}
-
-netdev_tx_t
-islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	isl38xx_control_block *cb = priv->control_block;
-	u32 index;
-	dma_addr_t pci_map_address;
-	int frame_size;
-	isl38xx_fragment *fragment;
-	int offset;
-	struct sk_buff *newskb;
-	int newskb_offset;
-	unsigned long flags;
-	unsigned char wds_mac[6];
-	u32 curr_frag;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit\n");
-#endif
-
-	/* lock the driver code */
-	spin_lock_irqsave(&priv->slock, flags);
-
-	/* check whether the destination queue has enough fragments for the frame */
-	curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ]);
-	if (unlikely(curr_frag - priv->free_data_tx >= ISL38XX_CB_TX_QSIZE)) {
-		printk(KERN_ERR "%s: transmit device queue full when awake\n",
-		       ndev->name);
-		netif_stop_queue(ndev);
-
-		/* trigger the device */
-		isl38xx_w32_flush(priv->device_base, ISL38XX_DEV_INT_UPDATE,
-				  ISL38XX_DEV_INT_REG);
-		udelay(ISL38XX_WRITEIO_DELAY);
-		goto drop_free;
-	}
-	/* Check alignment and WDS frame formatting. The start of the packet should
-	 * be aligned on a 4-byte boundary. If WDS is enabled add another 6 bytes
-	 * and add WDS address information */
-	if (likely(((long) skb->data & 0x03) | init_wds)) {
-		/* get the number of bytes to add and re-align */
-		offset = (4 - (long) skb->data) & 0x03;
-		offset += init_wds ? 6 : 0;
-
-		/* check whether the current skb can be used  */
-		if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
-			unsigned char *src = skb->data;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-			DEBUG(SHOW_TRACING, "skb offset %i wds %i\n", offset,
-			      init_wds);
-#endif
-
-			/* align the buffer on 4-byte boundary */
-			skb_reserve(skb, (4 - (long) skb->data) & 0x03);
-			if (init_wds) {
-				/* wds requires an additional address field of 6 bytes */
-				skb_put(skb, 6);
-#ifdef ISLPCI_ETH_DEBUG
-				printk("islpci_eth_transmit:wds_mac\n");
-#endif
-				memmove(skb->data + 6, src, skb->len);
-				skb_copy_to_linear_data(skb, wds_mac, 6);
-			} else {
-				memmove(skb->data, src, skb->len);
-			}
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-			DEBUG(SHOW_TRACING, "memmove %p %p %i\n", skb->data,
-			      src, skb->len);
-#endif
-		} else {
-			newskb =
-			    dev_alloc_skb(init_wds ? skb->len + 6 : skb->len);
-			if (unlikely(newskb == NULL)) {
-				printk(KERN_ERR "%s: Cannot allocate skb\n",
-				       ndev->name);
-				goto drop_free;
-			}
-			newskb_offset = (4 - (long) newskb->data) & 0x03;
-
-			/* Check if newskb->data is aligned */
-			if (newskb_offset)
-				skb_reserve(newskb, newskb_offset);
-
-			skb_put(newskb, init_wds ? skb->len + 6 : skb->len);
-			if (init_wds) {
-				skb_copy_from_linear_data(skb,
-							  newskb->data + 6,
-							  skb->len);
-				skb_copy_to_linear_data(newskb, wds_mac, 6);
-#ifdef ISLPCI_ETH_DEBUG
-				printk("islpci_eth_transmit:wds_mac\n");
-#endif
-			} else
-				skb_copy_from_linear_data(skb, newskb->data,
-							  skb->len);
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-			DEBUG(SHOW_TRACING, "memcpy %p %p %i wds %i\n",
-			      newskb->data, skb->data, skb->len, init_wds);
-#endif
-
-			newskb->dev = skb->dev;
-			dev_kfree_skb_irq(skb);
-			skb = newskb;
-		}
-	}
-	/* display the buffer contents for debugging */
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_BUFFER_CONTENTS, "\ntx %p ", skb->data);
-	display_buffer((char *) skb->data, skb->len);
-#endif
-
-	/* map the skb buffer to pci memory for DMA operation */
-	pci_map_address = dma_map_single(&priv->pdev->dev, (void *)skb->data,
-					 skb->len, DMA_TO_DEVICE);
-	if (dma_mapping_error(&priv->pdev->dev, pci_map_address)) {
-		printk(KERN_WARNING "%s: cannot map buffer to PCI\n",
-		       ndev->name);
-		goto drop_free;
-	}
-	/* Place the fragment in the control block structure. */
-	index = curr_frag % ISL38XX_CB_TX_QSIZE;
-	fragment = &cb->tx_data_low[index];
-
-	priv->pci_map_tx_address[index] = pci_map_address;
-	/* store the skb address for future freeing  */
-	priv->data_low_tx[index] = skb;
-	/* set the proper fragment start address and size information */
-	frame_size = skb->len;
-	fragment->size = cpu_to_le16(frame_size);
-	fragment->flags = cpu_to_le16(0);	/* set to 1 if more fragments */
-	fragment->address = cpu_to_le32(pci_map_address);
-	curr_frag++;
-
-	/* The fragment address in the control block must have been
-	 * written before announcing the frame buffer to device. */
-	wmb();
-	cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ] = cpu_to_le32(curr_frag);
-
-	if (curr_frag - priv->free_data_tx + ISL38XX_MIN_QTHRESHOLD
-	    > ISL38XX_CB_TX_QSIZE) {
-		/* stop sends from upper layers */
-		netif_stop_queue(ndev);
-
-		/* set the full flag for the transmission queue */
-		priv->data_low_tx_full = 1;
-	}
-
-	ndev->stats.tx_packets++;
-	ndev->stats.tx_bytes += skb->len;
-
-	/* trigger the device */
-	islpci_trigger(priv);
-
-	/* unlock the driver code */
-	spin_unlock_irqrestore(&priv->slock, flags);
-
-	return NETDEV_TX_OK;
-
-      drop_free:
-	ndev->stats.tx_dropped++;
-	spin_unlock_irqrestore(&priv->slock, flags);
-	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-}
-
-static inline int
-islpci_monitor_rx(islpci_private *priv, struct sk_buff **skb)
-{
-	/* The card reports full 802.11 packets but with a 20 bytes
-	 * header and without the FCS. But there a is a bit that
-	 * indicates if the packet is corrupted :-) */
-	struct rfmon_header *hdr = (struct rfmon_header *) (*skb)->data;
-
-	if (hdr->flags & 0x01)
-		/* This one is bad. Drop it ! */
-		return -1;
-	if (priv->ndev->type == ARPHRD_IEEE80211_PRISM) {
-		struct avs_80211_1_header *avs;
-		/* extract the relevant data from the header */
-		u32 clock = le32_to_cpu(hdr->clock);
-		u8 rate = hdr->rate;
-		u16 freq = le16_to_cpu(hdr->freq);
-		u8 rssi = hdr->rssi;
-
-		skb_pull(*skb, sizeof (struct rfmon_header));
-
-		if (skb_headroom(*skb) < sizeof (struct avs_80211_1_header)) {
-			struct sk_buff *newskb = skb_copy_expand(*skb,
-								 sizeof (struct
-									 avs_80211_1_header),
-								 0, GFP_ATOMIC);
-			if (newskb) {
-				dev_kfree_skb_irq(*skb);
-				*skb = newskb;
-			} else
-				return -1;
-			/* This behavior is not very subtile... */
-		}
-
-		/* make room for the new header and fill it. */
-		avs = skb_push(*skb, sizeof(struct avs_80211_1_header));
-
-		avs->version = cpu_to_be32(P80211CAPTURE_VERSION);
-		avs->length = cpu_to_be32(sizeof (struct avs_80211_1_header));
-		avs->mactime = cpu_to_be64(clock);
-		avs->hosttime = cpu_to_be64(jiffies);
-		avs->phytype = cpu_to_be32(6);	/*OFDM: 6 for (g), 8 for (a) */
-		avs->channel = cpu_to_be32(channel_of_freq(freq));
-		avs->datarate = cpu_to_be32(rate * 5);
-		avs->antenna = cpu_to_be32(0);	/*unknown */
-		avs->priority = cpu_to_be32(0);	/*unknown */
-		avs->ssi_type = cpu_to_be32(3);	/*2: dBm, 3: raw RSSI */
-		avs->ssi_signal = cpu_to_be32(rssi & 0x7f);
-		avs->ssi_noise = cpu_to_be32(priv->local_iwstatistics.qual.noise);	/*better than 'undefined', I assume */
-		avs->preamble = cpu_to_be32(0);	/*unknown */
-		avs->encoding = cpu_to_be32(0);	/*unknown */
-	} else
-		skb_pull(*skb, sizeof (struct rfmon_header));
-
-	(*skb)->protocol = htons(ETH_P_802_2);
-	skb_reset_mac_header(*skb);
-	(*skb)->pkt_type = PACKET_OTHERHOST;
-
-	return 0;
-}
-
-int
-islpci_eth_receive(islpci_private *priv)
-{
-	struct net_device *ndev = priv->ndev;
-	isl38xx_control_block *control_block = priv->control_block;
-	struct sk_buff *skb;
-	u16 size;
-	u32 index, offset;
-	unsigned char *src;
-	int discard = 0;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive\n");
-#endif
-
-	/* the device has written an Ethernet frame in the data area
-	 * of the sk_buff without updating the structure, do it now */
-	index = priv->free_data_rx % ISL38XX_CB_RX_QSIZE;
-	size = le16_to_cpu(control_block->rx_data_low[index].size);
-	skb = priv->data_low_rx[index];
-	offset = ((unsigned long)
-		  le32_to_cpu(control_block->rx_data_low[index].address) -
-		  (unsigned long) skb->data) & 3;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_TRACING,
-	      "frq->addr %x skb->data %p skb->len %u offset %u truesize %u\n",
-	      control_block->rx_data_low[priv->free_data_rx].address, skb->data,
-	      skb->len, offset, skb->truesize);
-#endif
-
-	/* delete the streaming DMA mapping before processing the skb */
-	dma_unmap_single(&priv->pdev->dev, priv->pci_map_rx_address[index],
-			 MAX_FRAGMENT_SIZE_RX + 2, DMA_FROM_DEVICE);
-
-	/* update the skb structure and align the buffer */
-	skb_put(skb, size);
-	if (offset) {
-		/* shift the buffer allocation offset bytes to get the right frame */
-		skb_pull(skb, 2);
-		skb_put(skb, 2);
-	}
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	/* display the buffer contents for debugging */
-	DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data);
-	display_buffer((char *) skb->data, skb->len);
-#endif
-
-	/* check whether WDS is enabled and whether the data frame is a WDS frame */
-
-	if (init_wds) {
-		/* WDS enabled, check for the wds address on the first 6 bytes of the buffer */
-		src = skb->data + 6;
-		memmove(skb->data, src, skb->len - 6);
-		skb_trim(skb, skb->len - 6);
-	}
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_TRACING, "Fragment size %i in skb at %p\n", size, skb);
-	DEBUG(SHOW_TRACING, "Skb data at %p, length %i\n", skb->data, skb->len);
-
-	/* display the buffer contents for debugging */
-	DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data);
-	display_buffer((char *) skb->data, skb->len);
-#endif
-	/* take care of monitor mode and spy monitoring. */
-	if (unlikely(priv->iw_mode == IW_MODE_MONITOR)) {
-		skb->dev = ndev;
-		discard = islpci_monitor_rx(priv, &skb);
-	} else {
-		if (unlikely(skb->data[2 * ETH_ALEN] == 0)) {
-			/* The packet has a rx_annex. Read it for spy monitoring, Then
-			 * remove it, while keeping the 2 leading MAC addr.
-			 */
-			struct iw_quality wstats;
-			struct rx_annex_header *annex =
-			    (struct rx_annex_header *) skb->data;
-			wstats.level = annex->rfmon.rssi;
-			/* The noise value can be a bit outdated if nobody's
-			 * reading wireless stats... */
-			wstats.noise = priv->local_iwstatistics.qual.noise;
-			wstats.qual = wstats.level - wstats.noise;
-			wstats.updated = 0x07;
-			/* Update spy records */
-			wireless_spy_update(ndev, annex->addr2, &wstats);
-
-			skb_copy_from_linear_data(skb,
-						  (skb->data +
-						   sizeof(struct rfmon_header)),
-						  2 * ETH_ALEN);
-			skb_pull(skb, sizeof (struct rfmon_header));
-		}
-		skb->protocol = eth_type_trans(skb, ndev);
-	}
-	skb->ip_summed = CHECKSUM_NONE;
-	ndev->stats.rx_packets++;
-	ndev->stats.rx_bytes += size;
-
-	/* deliver the skb to the network layer */
-#ifdef ISLPCI_ETH_DEBUG
-	printk
-	    ("islpci_eth_receive:netif_rx %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
-	     skb->data[0], skb->data[1], skb->data[2], skb->data[3],
-	     skb->data[4], skb->data[5]);
-#endif
-	if (unlikely(discard)) {
-		dev_kfree_skb_irq(skb);
-		skb = NULL;
-	} else
-		netif_rx(skb);
-
-	/* increment the read index for the rx data low queue */
-	priv->free_data_rx++;
-
-	/* add one or more sk_buff structures */
-	while (index =
-	       le32_to_cpu(control_block->
-			   driver_curr_frag[ISL38XX_CB_RX_DATA_LQ]),
-	       index - priv->free_data_rx < ISL38XX_CB_RX_QSIZE) {
-		/* allocate an sk_buff for received data frames storage
-		 * include any required allignment operations */
-		skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2);
-		if (unlikely(skb == NULL)) {
-			/* error allocating an sk_buff structure elements */
-			DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb\n");
-			break;
-		}
-		skb_reserve(skb, (4 - (long) skb->data) & 0x03);
-		/* store the new skb structure pointer */
-		index = index % ISL38XX_CB_RX_QSIZE;
-		priv->data_low_rx[index] = skb;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-		DEBUG(SHOW_TRACING,
-		      "new alloc skb %p skb->data %p skb->len %u index %u truesize %u\n",
-		      skb, skb->data, skb->len, index, skb->truesize);
-#endif
-
-		/* set the streaming DMA mapping for proper PCI bus operation */
-		priv->pci_map_rx_address[index] =
-		    dma_map_single(&priv->pdev->dev, (void *)skb->data,
-				   MAX_FRAGMENT_SIZE_RX + 2, DMA_FROM_DEVICE);
-		if (dma_mapping_error(&priv->pdev->dev, priv->pci_map_rx_address[index])) {
-			/* error mapping the buffer to device accessible memory address */
-			DEBUG(SHOW_ERROR_MESSAGES,
-			      "Error mapping DMA address\n");
-
-			/* free the skbuf structure before aborting */
-			dev_kfree_skb_irq(skb);
-			skb = NULL;
-			break;
-		}
-		/* update the fragment address */
-		control_block->rx_data_low[index].address =
-			cpu_to_le32((u32)priv->pci_map_rx_address[index]);
-		wmb();
-
-		/* increment the driver read pointer */
-		le32_add_cpu(&control_block->
-			     driver_curr_frag[ISL38XX_CB_RX_DATA_LQ], 1);
-	}
-
-	/* trigger the device */
-	islpci_trigger(priv);
-
-	return 0;
-}
-
-void
-islpci_do_reset_and_wake(struct work_struct *work)
-{
-	islpci_private *priv = container_of(work, islpci_private, reset_task);
-
-	islpci_reset(priv, 1);
-	priv->reset_task_pending = 0;
-	smp_wmb();
-	netif_wake_queue(priv->ndev);
-}
-
-void
-islpci_eth_tx_timeout(struct net_device *ndev, unsigned int txqueue)
-{
-	islpci_private *priv = netdev_priv(ndev);
-
-	/* increment the transmit error counter */
-	ndev->stats.tx_errors++;
-
-	if (!priv->reset_task_pending) {
-		printk(KERN_WARNING
-			"%s: tx_timeout, scheduling reset", ndev->name);
-		netif_stop_queue(ndev);
-		priv->reset_task_pending = 1;
-		schedule_work(&priv->reset_task);
-	} else {
-		printk(KERN_WARNING
-			"%s: tx_timeout, waiting for reset", ndev->name);
-	}
-}