diff options
Diffstat (limited to 'drivers/net/wireless/rsi/rsi_91x_sdio_ops.c')
| -rw-r--r-- | drivers/net/wireless/rsi/rsi_91x_sdio_ops.c | 84 |
1 files changed, 55 insertions, 29 deletions
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c index df2a63b1f15c..8e2a95c486b0 100644 --- a/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c +++ b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c @@ -69,20 +69,37 @@ int rsi_sdio_master_access_msword(struct rsi_hw *adapter, u16 ms_word) static int rsi_process_pkt(struct rsi_common *common) { struct rsi_hw *adapter = common->priv; + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; u8 num_blks = 0; u32 rcv_pkt_len = 0; int status = 0; + u8 value = 0; - status = rsi_sdio_read_register(adapter, - SDIO_RX_NUM_BLOCKS_REG, - &num_blks); + num_blks = ((adapter->interrupt_status & 1) | + ((adapter->interrupt_status >> RECV_NUM_BLOCKS) << 1)); - if (status) { - rsi_dbg(ERR_ZONE, - "%s: Failed to read pkt length from the card:\n", - __func__); - return status; + if (!num_blks) { + status = rsi_sdio_read_register(adapter, + SDIO_RX_NUM_BLOCKS_REG, + &value); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to read pkt length from the card:\n", + __func__); + return status; + } + num_blks = value & 0x1f; + } + + if (dev->write_fail == 2) + rsi_sdio_ack_intr(common->priv, (1 << MSDU_PKT_PENDING)); + + if (unlikely(!num_blks)) { + dev->write_fail = 2; + return -1; } + rcv_pkt_len = (num_blks * 256); common->rx_data_pkt = kmalloc(rcv_pkt_len, GFP_KERNEL); @@ -213,7 +230,7 @@ void rsi_interrupt_handler(struct rsi_hw *adapter) dev->rx_info.sdio_int_counter++; do { - mutex_lock(&common->tx_rxlock); + mutex_lock(&common->rx_lock); status = rsi_sdio_read_register(common->priv, RSI_FN1_INT_REGISTER, &isr_status); @@ -221,14 +238,15 @@ void rsi_interrupt_handler(struct rsi_hw *adapter) rsi_dbg(ERR_ZONE, "%s: Failed to Read Intr Status Register\n", __func__); - mutex_unlock(&common->tx_rxlock); + mutex_unlock(&common->rx_lock); return; } + adapter->interrupt_status = isr_status; if (isr_status == 0) { rsi_set_event(&common->tx_thread.event); dev->rx_info.sdio_intr_status_zero++; - mutex_unlock(&common->tx_rxlock); + mutex_unlock(&common->rx_lock); return; } @@ -241,10 +259,12 @@ void rsi_interrupt_handler(struct rsi_hw *adapter) switch (isr_type) { case BUFFER_AVAILABLE: - dev->rx_info.watch_bufferfull_count = 0; - dev->rx_info.buffer_full = false; - dev->rx_info.semi_buffer_full = false; - dev->rx_info.mgmt_buffer_full = false; + status = rsi_sdio_check_buffer_status(adapter, + 0); + if (status < 0) + rsi_dbg(ERR_ZONE, + "%s: Failed to check buffer status\n", + __func__); rsi_sdio_ack_intr(common->priv, (1 << PKT_BUFF_AVAILABLE)); rsi_set_event(&common->tx_thread.event); @@ -252,7 +272,7 @@ void rsi_interrupt_handler(struct rsi_hw *adapter) rsi_dbg(ISR_ZONE, "%s: ==> BUFFER_AVAILABLE <==\n", __func__); - dev->rx_info.buf_available_counter++; + dev->buff_status_updated = true; break; case FIRMWARE_ASSERT_IND: @@ -286,7 +306,7 @@ void rsi_interrupt_handler(struct rsi_hw *adapter) rsi_dbg(ERR_ZONE, "%s: Failed to read pkt\n", __func__); - mutex_unlock(&common->tx_rxlock); + mutex_unlock(&common->rx_lock); return; } break; @@ -301,28 +321,28 @@ void rsi_interrupt_handler(struct rsi_hw *adapter) } isr_status ^= BIT(isr_type - 1); } while (isr_status); - mutex_unlock(&common->tx_rxlock); + mutex_unlock(&common->rx_lock); } while (1); } -/** - * rsi_sdio_read_buffer_status_register() - This function is used to the read - * buffer status register and set - * relevant fields in - * rsi_91x_sdiodev struct. - * @adapter: Pointer to the driver hw structure. - * @q_num: The Q number whose status is to be found. - * - * Return: status: -1 on failure or else queue full/stop is indicated. +/* This function is used to read buffer status register and + * set relevant fields in rsi_91x_sdiodev struct. */ -int rsi_sdio_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num) +int rsi_sdio_check_buffer_status(struct rsi_hw *adapter, u8 q_num) { struct rsi_common *common = adapter->priv; struct rsi_91x_sdiodev *dev = (struct rsi_91x_sdiodev *)adapter->rsi_dev; u8 buf_status = 0; int status = 0; + static int counter = 4; + + if (!dev->buff_status_updated && counter) { + counter--; + goto out; + } + dev->buff_status_updated = false; status = rsi_sdio_read_register(common->priv, RSI_DEVICE_BUFFER_STATUS_REGISTER, &buf_status); @@ -357,10 +377,16 @@ int rsi_sdio_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num) dev->rx_info.semi_buffer_full = false; } + if (dev->rx_info.mgmt_buffer_full || dev->rx_info.buf_full_counter) + counter = 1; + else + counter = 4; + +out: if ((q_num == MGMT_SOFT_Q) && (dev->rx_info.mgmt_buffer_full)) return QUEUE_FULL; - if (dev->rx_info.buffer_full) + if ((q_num < MGMT_SOFT_Q) && (dev->rx_info.buffer_full)) return QUEUE_FULL; return QUEUE_NOT_FULL; |