diff options
Diffstat (limited to 'drivers/net/wireless/rtl818x/rtl8180/dev.c')
| -rw-r--r-- | drivers/net/wireless/rtl818x/rtl8180/dev.c | 1009 |
1 files changed, 865 insertions, 144 deletions
diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c index 3867d1470b36..98d8256f0377 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c @@ -1,15 +1,42 @@ -/* - * Linux device driver for RTL8180 / RTL8185 +/* Linux device driver for RTL8180 / RTL8185 / RTL8187SE * * Copyright 2007 Michael Wu <flamingice@sourmilk.net> - * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * Copyright 2007,2014 Andrea Merello <andrea.merello@gmail.com> * * Based on the r8180 driver, which is: * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al. * * Thanks to Realtek for their support! * + ************************************************************************ + * + * The driver was extended to the RTL8187SE in 2014 by + * Andrea Merello <andrea.merello@gmail.com> + * + * based also on: + * - portions of rtl8187se Linux staging driver, Copyright Realtek corp. + * - other GPL, unpublished (until now), Linux driver code, + * Copyright Larry Finger <Larry.Finger@lwfinger.net> + * + * A huge thanks goes to Sara V. Nari who forgives me when I'm + * sitting in front of my laptop at evening, week-end, night... + * + * A special thanks goes to Antonio Cuni, who helped me with + * some python userspace stuff I used to debug RTL8187SE code, and who + * bought a laptop with an unsupported Wi-Fi card some years ago... + * + * Thanks to Larry Finger for writing some code for rtl8187se and for + * his suggestions. + * + * Thanks to Dan Carpenter for reviewing my initial patch and for his + * suggestions. + * + * Thanks to Bernhard Schiffner for his help in testing and for his + * suggestions. + * + ************************************************************************ + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -29,13 +56,18 @@ #include "sa2400.h" #include "max2820.h" #include "grf5101.h" +#include "rtl8225se.h" MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); MODULE_AUTHOR("Andrea Merello <andrea.merello@gmail.com>"); -MODULE_DESCRIPTION("RTL8180 / RTL8185 PCI wireless driver"); +MODULE_DESCRIPTION("RTL8180 / RTL8185 / RTL8187SE PCI wireless driver"); MODULE_LICENSE("GPL"); static DEFINE_PCI_DEVICE_TABLE(rtl8180_table) = { + + /* rtl8187se */ + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8199) }, + /* rtl8185 */ { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) }, { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x700f) }, @@ -85,6 +117,76 @@ static const struct ieee80211_channel rtl818x_channels[] = { { .center_freq = 2484 }, }; +/* Queues for rtl8187se card + * + * name | reg | queue + * BC | 7 | 6 + * MG | 1 | 0 + * HI | 6 | 1 + * VO | 5 | 2 + * VI | 4 | 3 + * BE | 3 | 4 + * BK | 2 | 5 + * + * The complete map for DMA kick reg using use all queue is: + * static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] = + * {1, 6, 5, 4, 3, 2, 7}; + * + * .. but.. Because for mac80211 4 queues are enough for QoS we use this + * + * name | reg | queue + * BC | 7 | 4 <- currently not used yet + * MG | 1 | x <- Not used + * HI | 6 | x <- Not used + * VO | 5 | 0 <- used + * VI | 4 | 1 <- used + * BE | 3 | 2 <- used + * BK | 2 | 3 <- used + * + * Beacon queue could be used, but this is not finished yet. + * + * I thougth about using the other two queues but I decided not to do this: + * + * - I'm unsure whether the mac80211 will ever try to use more than 4 queues + * by itself. + * + * - I could route MGMT frames (currently sent over VO queue) to the MGMT + * queue but since mac80211 will do not know about it, I will probably gain + * some HW priority whenever the VO queue is not empty, but this gain is + * limited by the fact that I had to stop the mac80211 queue whenever one of + * the VO or MGMT queues is full, stopping also submitting of MGMT frame + * to the driver. + * + * - I don't know how to set in the HW the contention window params for MGMT + * and HI-prio queues. + */ + +static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] = {5, 4, 3, 2, 7}; + +/* Queues for rtl8180/rtl8185 cards + * + * name | reg | prio + * BC | 7 | 3 + * HI | 6 | 0 + * NO | 5 | 1 + * LO | 4 | 2 + * + * The complete map for DMA kick reg using all queue is: + * static const int rtl8180_queues_map[RTL8180_NR_TX_QUEUES] = {6, 5, 4, 7}; + * + * .. but .. Because the mac80211 needs at least 4 queues for QoS or + * otherwise QoS can't be done, we use just one. + * Beacon queue could be used, but this is not finished yet. + * Actual map is: + * + * name | reg | prio + * BC | 7 | 1 <- currently not used yet. + * HI | 6 | x <- not used + * NO | 5 | x <- not used + * LO | 4 | 0 <- used + */ + +static const int rtl8180_queues_map[RTL8180_NR_TX_QUEUES] = {4, 7}; void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data) { @@ -105,14 +207,30 @@ void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data) static void rtl8180_handle_rx(struct ieee80211_hw *dev) { struct rtl8180_priv *priv = dev->priv; + struct rtl818x_rx_cmd_desc *cmd_desc; unsigned int count = 32; u8 signal, agc, sq; dma_addr_t mapping; while (count--) { - struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx]; + void *entry = priv->rx_ring + priv->rx_idx * priv->rx_ring_sz; struct sk_buff *skb = priv->rx_buf[priv->rx_idx]; - u32 flags = le32_to_cpu(entry->flags); + u32 flags, flags2; + u64 tsft; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + struct rtl8187se_rx_desc *desc = entry; + + flags = le32_to_cpu(desc->flags); + flags2 = le32_to_cpu(desc->flags2); + tsft = le64_to_cpu(desc->tsft); + } else { + struct rtl8180_rx_desc *desc = entry; + + flags = le32_to_cpu(desc->flags); + flags2 = le32_to_cpu(desc->flags2); + tsft = le64_to_cpu(desc->tsft); + } if (flags & RTL818X_RX_DESC_FLAG_OWN) return; @@ -122,7 +240,6 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) RTL818X_RX_DESC_FLAG_RX_ERR))) goto done; else { - u32 flags2 = le32_to_cpu(entry->flags2); struct ieee80211_rx_status rx_status = {0}; struct sk_buff *new_skb = dev_alloc_skb(MAX_RX_SIZE); @@ -148,19 +265,24 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) rx_status.antenna = (flags2 >> 15) & 1; rx_status.rate_idx = (flags >> 20) & 0xF; agc = (flags2 >> 17) & 0x7F; - if (priv->r8185) { + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) { if (rx_status.rate_idx > 3) signal = 90 - clamp_t(u8, agc, 25, 90); else signal = 95 - clamp_t(u8, agc, 30, 95); - } else { + } else if (priv->chip_family == + RTL818X_CHIP_FAMILY_RTL8180) { sq = flags2 & 0xff; signal = priv->rf->calc_rssi(agc, sq); + } else { + /* TODO: rtl8187se rssi */ + signal = 10; } rx_status.signal = signal; rx_status.freq = dev->conf.chandef.chan->center_freq; rx_status.band = dev->conf.chandef.chan->band; - rx_status.mactime = le64_to_cpu(entry->tsft); + rx_status.mactime = tsft; rx_status.flag |= RX_FLAG_MACTIME_START; if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR) rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; @@ -174,11 +296,13 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) } done: - entry->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb)); - entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN | + cmd_desc = entry; + cmd_desc->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb)); + cmd_desc->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN | MAX_RX_SIZE); if (priv->rx_idx == 31) - entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR); + cmd_desc->flags |= + cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR); priv->rx_idx = (priv->rx_idx + 1) % 32; } } @@ -218,6 +342,55 @@ static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio) } } +static irqreturn_t rtl8187se_interrupt(int irq, void *dev_id) +{ + struct ieee80211_hw *dev = dev_id; + struct rtl8180_priv *priv = dev->priv; + u32 reg; + unsigned long flags; + static int desc_err; + + spin_lock_irqsave(&priv->lock, flags); + /* Note: 32-bit interrupt status */ + reg = rtl818x_ioread32(priv, &priv->map->INT_STATUS_SE); + if (unlikely(reg == 0xFFFFFFFF)) { + spin_unlock_irqrestore(&priv->lock, flags); + return IRQ_HANDLED; + } + + rtl818x_iowrite32(priv, &priv->map->INT_STATUS_SE, reg); + + if (reg & IMR_TIMEOUT1) + rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0); + + if (reg & (IMR_TBDOK | IMR_TBDER)) + rtl8180_handle_tx(dev, 4); + + if (reg & (IMR_TVODOK | IMR_TVODER)) + rtl8180_handle_tx(dev, 0); + + if (reg & (IMR_TVIDOK | IMR_TVIDER)) + rtl8180_handle_tx(dev, 1); + + if (reg & (IMR_TBEDOK | IMR_TBEDER)) + rtl8180_handle_tx(dev, 2); + + if (reg & (IMR_TBKDOK | IMR_TBKDER)) + rtl8180_handle_tx(dev, 3); + + if (reg & (IMR_ROK | IMR_RER | RTL818X_INT_SE_RX_DU | IMR_RQOSOK)) + rtl8180_handle_rx(dev); + /* The interface sometimes generates several RX DMA descriptor errors + * at startup. Do not report these. + */ + if ((reg & RTL818X_INT_SE_RX_DU) && desc_err++ > 2) + if (net_ratelimit()) + wiphy_err(dev->wiphy, "No RX DMA Descriptor avail\n"); + + spin_unlock_irqrestore(&priv->lock, flags); + return IRQ_HANDLED; +} + static irqreturn_t rtl8180_interrupt(int irq, void *dev_id) { struct ieee80211_hw *dev = dev_id; @@ -234,12 +407,6 @@ static irqreturn_t rtl8180_interrupt(int irq, void *dev_id) rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg); if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR)) - rtl8180_handle_tx(dev, 3); - - if (reg & (RTL818X_INT_TXH_OK | RTL818X_INT_TXH_ERR)) - rtl8180_handle_tx(dev, 2); - - if (reg & (RTL818X_INT_TXN_OK | RTL818X_INT_TXN_ERR)) rtl8180_handle_tx(dev, 1); if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR)) @@ -263,12 +430,14 @@ static void rtl8180_tx(struct ieee80211_hw *dev, struct rtl8180_tx_ring *ring; struct rtl8180_tx_desc *entry; unsigned long flags; - unsigned int idx, prio; + unsigned int idx, prio, hw_prio; dma_addr_t mapping; u32 tx_flags; u8 rc_flags; u16 plcp_len = 0; __le16 rts_duration = 0; + /* do arithmetic and then convert to le16 */ + u16 frame_duration = 0; prio = skb_get_queue_mapping(skb); ring = &priv->tx_ring[prio]; @@ -280,7 +449,6 @@ static void rtl8180_tx(struct ieee80211_hw *dev, kfree_skb(skb); dev_err(&priv->pdev->dev, "TX DMA mapping error\n"); return; - } tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS | @@ -288,7 +456,7 @@ static void rtl8180_tx(struct ieee80211_hw *dev, (ieee80211_get_tx_rate(dev, info)->hw_value << 24) | skb->len; - if (priv->r8185) + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) tx_flags |= RTL818X_TX_DESC_FLAG_DMA | RTL818X_TX_DESC_FLAG_NO_ENC; @@ -305,7 +473,7 @@ static void rtl8180_tx(struct ieee80211_hw *dev, rts_duration = ieee80211_rts_duration(dev, priv->vif, skb->len, info); - if (!priv->r8185) { + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) { unsigned int remainder; plcp_len = DIV_ROUND_UP(16 * (skb->len + 4), @@ -316,6 +484,18 @@ static void rtl8180_tx(struct ieee80211_hw *dev, plcp_len |= 1 << 15; } + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + __le16 duration; + /* SIFS time (required by HW) is already included by + * ieee80211_generic_frame_duration + */ + duration = ieee80211_generic_frame_duration(dev, priv->vif, + IEEE80211_BAND_2GHZ, skb->len, + ieee80211_get_tx_rate(dev, info)); + + frame_duration = priv->ack_time + le16_to_cpu(duration); + } + spin_lock_irqsave(&priv->lock, flags); if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { @@ -328,21 +508,91 @@ static void rtl8180_tx(struct ieee80211_hw *dev, idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries; entry = &ring->desc[idx]; + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + entry->frame_duration = cpu_to_le16(frame_duration); + entry->frame_len_se = cpu_to_le16(skb->len); + + /* tpc polarity */ + entry->flags3 = cpu_to_le16(1<<4); + } else + entry->frame_len = cpu_to_le32(skb->len); + entry->rts_duration = rts_duration; entry->plcp_len = cpu_to_le16(plcp_len); entry->tx_buf = cpu_to_le32(mapping); - entry->frame_len = cpu_to_le32(skb->len); + entry->flags2 = info->control.rates[1].idx >= 0 ? ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0; entry->retry_limit = info->control.rates[0].count; + + /* We must be sure that tx_flags is written last because the HW + * looks at it to check if the rest of data is valid or not + */ + wmb(); entry->flags = cpu_to_le32(tx_flags); + /* We must be sure this has been written before followings HW + * register write, because this write will made the HW attempts + * to DMA the just-written data + */ + wmb(); + __skb_queue_tail(&ring->queue, skb); if (ring->entries - skb_queue_len(&ring->queue) < 2) ieee80211_stop_queue(dev, prio); spin_unlock_irqrestore(&priv->lock, flags); - rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4))); + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + /* just poll: rings are stopped with TPPollStop reg */ + hw_prio = rtl8187se_queues_map[prio]; + rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, + (1 << hw_prio)); + } else { + hw_prio = rtl8180_queues_map[prio]; + rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, + (1 << hw_prio) | /* ring to poll */ + (1<<1) | (1<<2));/* stopped rings */ + } +} + +static void rtl8180_set_anaparam3(struct rtl8180_priv *priv, u16 anaparam3) +{ + u8 reg; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_CONFIG); + + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg | RTL818X_CONFIG3_ANAPARAM_WRITE); + + rtl818x_iowrite16(priv, &priv->map->ANAPARAM3, anaparam3); + + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_NORMAL); +} + +void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2) +{ + u8 reg; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_CONFIG); + + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg | RTL818X_CONFIG3_ANAPARAM_WRITE); + + rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2); + + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_NORMAL); } void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam) @@ -359,17 +609,171 @@ void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam) rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); } +static void rtl8187se_mac_config(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u8 reg; + + rtl818x_iowrite32(priv, REG_ADDR4(0x1F0), 0); + rtl818x_ioread32(priv, REG_ADDR4(0x1F0)); + rtl818x_iowrite32(priv, REG_ADDR4(0x1F4), 0); + rtl818x_ioread32(priv, REG_ADDR4(0x1F4)); + rtl818x_iowrite8(priv, REG_ADDR1(0x1F8), 0); + rtl818x_ioread8(priv, REG_ADDR1(0x1F8)); + /* Enable DA10 TX power saving */ + reg = rtl818x_ioread8(priv, &priv->map->PHY_PR); + rtl818x_iowrite8(priv, &priv->map->PHY_PR, reg | 0x04); + /* Power */ + rtl818x_iowrite16(priv, PI_DATA_REG, 0x1000); + rtl818x_iowrite16(priv, SI_DATA_REG, 0x1000); + /* AFE - default to power ON */ + rtl818x_iowrite16(priv, REG_ADDR2(0x370), 0x0560); + rtl818x_iowrite16(priv, REG_ADDR2(0x372), 0x0560); + rtl818x_iowrite16(priv, REG_ADDR2(0x374), 0x0DA4); + rtl818x_iowrite16(priv, REG_ADDR2(0x376), 0x0DA4); + rtl818x_iowrite16(priv, REG_ADDR2(0x378), 0x0560); + rtl818x_iowrite16(priv, REG_ADDR2(0x37A), 0x0560); + rtl818x_iowrite16(priv, REG_ADDR2(0x37C), 0x00EC); + rtl818x_iowrite16(priv, REG_ADDR2(0x37E), 0x00EC); + rtl818x_iowrite8(priv, REG_ADDR1(0x24E), 0x01); + /* unknown, needed for suspend to RAM resume */ + rtl818x_iowrite8(priv, REG_ADDR1(0x0A), 0x72); +} + +static void rtl8187se_set_antenna_config(struct ieee80211_hw *dev, u8 def_ant, + bool diversity) +{ + struct rtl8180_priv *priv = dev->priv; + + rtl8225_write_phy_cck(dev, 0x0C, 0x09); + if (diversity) { + if (def_ant == 1) { + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x00); + rtl8225_write_phy_cck(dev, 0x11, 0xBB); + rtl8225_write_phy_cck(dev, 0x01, 0xC7); + rtl8225_write_phy_ofdm(dev, 0x0D, 0x54); + rtl8225_write_phy_ofdm(dev, 0x18, 0xB2); + } else { /* main antenna */ + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); + rtl8225_write_phy_cck(dev, 0x11, 0x9B); + rtl8225_write_phy_cck(dev, 0x01, 0xC7); + rtl8225_write_phy_ofdm(dev, 0x0D, 0x5C); + rtl8225_write_phy_ofdm(dev, 0x18, 0xB2); + } + } else { /* disable antenna diversity */ + if (def_ant == 1) { + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x00); + rtl8225_write_phy_cck(dev, 0x11, 0xBB); + rtl8225_write_phy_cck(dev, 0x01, 0x47); + rtl8225_write_phy_ofdm(dev, 0x0D, 0x54); + rtl8225_write_phy_ofdm(dev, 0x18, 0x32); + } else { /* main antenna */ + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); + rtl8225_write_phy_cck(dev, 0x11, 0x9B); + rtl8225_write_phy_cck(dev, 0x01, 0x47); + rtl8225_write_phy_ofdm(dev, 0x0D, 0x5C); + rtl8225_write_phy_ofdm(dev, 0x18, 0x32); + } + } + /* priv->curr_ant = def_ant; */ +} + +static void rtl8180_int_enable(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + rtl818x_iowrite32(priv, &priv->map->IMR, IMR_TMGDOK | + IMR_TBDER | IMR_THPDER | + IMR_THPDER | IMR_THPDOK | + IMR_TVODER | IMR_TVODOK | + IMR_TVIDER | IMR_TVIDOK | + IMR_TBEDER | IMR_TBEDOK | + IMR_TBKDER | IMR_TBKDOK | + IMR_RDU | IMR_RER | + IMR_ROK | IMR_RQOSOK); + } else { + rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF); + } +} + +static void rtl8180_int_disable(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + rtl818x_iowrite32(priv, &priv->map->IMR, 0); + } else { + rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); + } +} + +static void rtl8180_conf_basic_rates(struct ieee80211_hw *dev, + u32 rates_mask) +{ + struct rtl8180_priv *priv = dev->priv; + + u8 max, min; + u16 reg; + + max = fls(rates_mask) - 1; + min = ffs(rates_mask) - 1; + + switch (priv->chip_family) { + + case RTL818X_CHIP_FAMILY_RTL8180: + /* in 8180 this is NOT a BITMAP */ + reg = rtl818x_ioread16(priv, &priv->map->BRSR); + reg &= ~3; + reg |= max; + rtl818x_iowrite16(priv, &priv->map->BRSR, reg); + break; + + case RTL818X_CHIP_FAMILY_RTL8185: + /* in 8185 this is a BITMAP */ + rtl818x_iowrite16(priv, &priv->map->BRSR, rates_mask); + rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (max << 4) | min); + break; + + case RTL818X_CHIP_FAMILY_RTL8187SE: + /* in 8187se this is a BITMAP */ + rtl818x_iowrite16(priv, &priv->map->BRSR_8187SE, rates_mask); + break; + } +} + +static void rtl8180_config_cardbus(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u16 reg16; + u8 reg8; + + reg8 = rtl818x_ioread8(priv, &priv->map->CONFIG3); + reg8 |= 1 << 1; + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg8); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + rtl818x_iowrite16(priv, FEMR_SE, 0xffff); + } else { + reg16 = rtl818x_ioread16(priv, &priv->map->FEMR); + reg16 |= (1 << 15) | (1 << 14) | (1 << 4); + rtl818x_iowrite16(priv, &priv->map->FEMR, reg16); + } + +} + static int rtl8180_init_hw(struct ieee80211_hw *dev) { struct rtl8180_priv *priv = dev->priv; u16 reg; + u32 reg32; rtl818x_iowrite8(priv, &priv->map->CMD, 0); rtl818x_ioread8(priv, &priv->map->CMD); msleep(10); /* reset */ - rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); + rtl8180_int_disable(dev); rtl818x_ioread8(priv, &priv->map->CMD); reg = rtl818x_ioread8(priv, &priv->map->CMD); @@ -390,31 +794,45 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev) msleep(200); if (rtl818x_ioread8(priv, &priv->map->CONFIG3) & (1 << 3)) { - /* For cardbus */ - reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); - reg |= 1 << 1; - rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg); - reg = rtl818x_ioread16(priv, &priv->map->FEMR); - reg |= (1 << 15) | (1 << 14) | (1 << 4); - rtl818x_iowrite16(priv, &priv->map->FEMR, reg); + rtl8180_config_cardbus(dev); } - rtl818x_iowrite8(priv, &priv->map->MSR, 0); + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA); + else + rtl818x_iowrite8(priv, &priv->map->MSR, 0); - if (!priv->r8185) + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) rtl8180_set_anaparam(priv, priv->anaparam); rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma); - rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma); - rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma); - rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma); - rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma); + /* mac80211 queue have higher prio for lower index. The last queue + * (that mac80211 is not aware of) is reserved for beacons (and have + * the highest priority on the NIC) + */ + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8187SE) { + rtl818x_iowrite32(priv, &priv->map->TBDA, + priv->tx_ring[1].dma); + rtl818x_iowrite32(priv, &priv->map->TLPDA, + priv->tx_ring[0].dma); + } else { + rtl818x_iowrite32(priv, &priv->map->TBDA, + priv->tx_ring[4].dma); + rtl818x_iowrite32(priv, &priv->map->TVODA, + priv->tx_ring[0].dma); + rtl818x_iowrite32(priv, &priv->map->TVIDA, + priv->tx_ring[1].dma); + rtl818x_iowrite32(priv, &priv->map->TBEDA, + priv->tx_ring[2].dma); + rtl818x_iowrite32(priv, &priv->map->TBKDA, + priv->tx_ring[3].dma); + } /* TODO: necessary? specs indicate not */ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); reg = rtl818x_ioread8(priv, &priv->map->CONFIG2); rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3)); - if (priv->r8185) { + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) { reg = rtl818x_ioread8(priv, &priv->map->CONFIG2); rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4)); } @@ -426,13 +844,17 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev) rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0); - if (priv->r8185) { + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) { rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0); rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81); - rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0); + } else { + rtl818x_iowrite8(priv, &priv->map->SECURITY, 0); - rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3); + rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6); + rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C); + } + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) { /* TODO: set ClkRun enable? necessary? */ reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE); rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6)); @@ -440,28 +862,90 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev) reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2)); rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); - } else { - rtl818x_iowrite16(priv, &priv->map->BRSR, 0x1); - rtl818x_iowrite8(priv, &priv->map->SECURITY, 0); + } - rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6); - rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C); + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + + /* the set auto rate fallback bitmask from 1M to 54 Mb/s */ + rtl818x_iowrite16(priv, ARFR, 0xFFF); + rtl818x_ioread16(priv, ARFR); + + /* stop unused queus (no dma alloc) */ + rtl818x_iowrite8(priv, &priv->map->TPPOLL_STOP, + RTL818x_TPPOLL_STOP_MG | RTL818x_TPPOLL_STOP_HI); + + rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0x00); + rtl818x_iowrite16(priv, &priv->map->TID_AC_MAP, 0xFA50); + + rtl818x_iowrite16(priv, &priv->map->INT_MIG, 0); + + /* some black magic here.. */ + rtl8187se_mac_config(dev); + + rtl818x_iowrite16(priv, RFSW_CTRL, 0x569A); + rtl818x_ioread16(priv, RFSW_CTRL); + + rtl8180_set_anaparam(priv, RTL8225SE_ANAPARAM_ON); + rtl8180_set_anaparam2(priv, RTL8225SE_ANAPARAM2_ON); + rtl8180_set_anaparam3(priv, RTL8225SE_ANAPARAM3); + + + rtl818x_iowrite8(priv, &priv->map->CONFIG5, + rtl818x_ioread8(priv, &priv->map->CONFIG5) & 0x7F); + + /*probably this switch led on */ + rtl818x_iowrite8(priv, &priv->map->PGSELECT, + rtl818x_ioread8(priv, &priv->map->PGSELECT) | 0x08); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1BFF); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488); + + rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x4003); + + /* the reference code mac hardcode table write + * this reg by doing byte-wide accesses. + * It does it just for lowest and highest byte.. + */ + reg32 = rtl818x_ioread32(priv, &priv->map->RF_PARA); + reg32 &= 0x00ffff00; + reg32 |= 0xb8000054; + rtl818x_iowrite32(priv, &priv->map->RF_PARA, reg32); } priv->rf->init(dev); - if (priv->r8185) - rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3); + + /* default basic rates are 1,2 Mbps for rtl8180. 1,2,6,9,12,18,24 Mbps + * otherwise. bitmask 0x3 and 0x01f3 respectively. + * NOTE: currenty rtl8225 RF code changes basic rates, so we need to do + * this after rf init. + * TODO: try to find out whether RF code really needs to do this.. + */ + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) + rtl8180_conf_basic_rates(dev, 0x3); + else + rtl8180_conf_basic_rates(dev, 0x1f3); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + rtl8187se_set_antenna_config(dev, + priv->antenna_diversity_default, + priv->antenna_diversity_en); return 0; } static int rtl8180_init_rx_ring(struct ieee80211_hw *dev) { struct rtl8180_priv *priv = dev->priv; - struct rtl8180_rx_desc *entry; + struct rtl818x_rx_cmd_desc *entry; int i; + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + priv->rx_ring_sz = sizeof(struct rtl8187se_rx_desc); + else + priv->rx_ring_sz = sizeof(struct rtl8180_rx_desc); + priv->rx_ring = pci_alloc_consistent(priv->pdev, - sizeof(*priv->rx_ring) * 32, + priv->rx_ring_sz * 32, &priv->rx_ring_dma); if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) { @@ -469,20 +953,28 @@ static int rtl8180_init_rx_ring(struct ieee80211_hw *dev) return -ENOMEM; } - memset(priv->rx_ring, 0, sizeof(*priv->rx_ring) * 32); + memset(priv->rx_ring, 0, priv->rx_ring_sz * 32); priv->rx_idx = 0; for (i = 0; i < 32; i++) { struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE); dma_addr_t *mapping; - entry = &priv->rx_ring[i]; - if (!skb) - return 0; - + entry = priv->rx_ring + priv->rx_ring_sz*i; + if (!skb) { + wiphy_err(dev->wiphy, "Cannot allocate RX skb\n"); + return -ENOMEM; + } priv->rx_buf[i] = skb; mapping = (dma_addr_t *)skb->cb; *mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb), MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + + if (pci_dma_mapping_error(priv->pdev, *mapping)) { + kfree_skb(skb); + wiphy_err(dev->wiphy, "Cannot map DMA for RX skb\n"); + return -ENOMEM; + } + entry->rx_buf = cpu_to_le32(*mapping); entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN | MAX_RX_SIZE); @@ -507,7 +999,7 @@ static void rtl8180_free_rx_ring(struct ieee80211_hw *dev) kfree_skb(skb); } - pci_free_consistent(priv->pdev, sizeof(*priv->rx_ring) * 32, + pci_free_consistent(priv->pdev, priv->rx_ring_sz * 32, priv->rx_ring, priv->rx_ring_dma); priv->rx_ring = NULL; } @@ -571,7 +1063,7 @@ static int rtl8180_start(struct ieee80211_hw *dev) if (ret) return ret; - for (i = 0; i < 4; i++) + for (i = 0; i < (dev->queues + 1); i++) if ((ret = rtl8180_init_tx_ring(dev, i, 16))) goto err_free_rings; @@ -579,23 +1071,28 @@ static int rtl8180_start(struct ieee80211_hw *dev) if (ret) goto err_free_rings; - rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma); - rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma); - rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma); - rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma); - rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma); - - ret = request_irq(priv->pdev->irq, rtl8180_interrupt, + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + ret = request_irq(priv->pdev->irq, rtl8187se_interrupt, IRQF_SHARED, KBUILD_MODNAME, dev); + } else { + ret = request_irq(priv->pdev->irq, rtl8180_interrupt, + IRQF_SHARED, KBUILD_MODNAME, dev); + } + if (ret) { wiphy_err(dev->wiphy, "failed to register IRQ handler\n"); goto err_free_rings; } - rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF); + rtl8180_int_enable(dev); - rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0); - rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0); + /* in rtl8187se at MAR regs offset there is the management + * TX descriptor DMA addres.. + */ + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8187SE) { + rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0); + rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0); + } reg = RTL818X_RX_CONF_ONLYERLPKT | RTL818X_RX_CONF_RX_AUTORESETPHY | @@ -605,27 +1102,42 @@ static int rtl8180_start(struct ieee80211_hw *dev) RTL818X_RX_CONF_BROADCAST | RTL818X_RX_CONF_NICMAC; - if (priv->r8185) + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2; - else { + else if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) { reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1) ? RTL818X_RX_CONF_CSDM1 : 0; reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2) ? RTL818X_RX_CONF_CSDM2 : 0; + } else { + reg &= ~(RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2); } priv->rx_conf = reg; rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg); - if (priv->r8185) { + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) { reg = rtl818x_ioread8(priv, &priv->map->CW_CONF); - reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT; - reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT; + + /* CW is not on per-packet basis. + * in rtl8185 the CW_VALUE reg is used. + * in rtl8187se the AC param regs are used. + */ + reg &= ~RTL818X_CW_CONF_PERPACKET_CW; + /* retry limit IS on per-packet basis. + * the short and long retry limit in TX_CONF + * reg are ignored + */ + reg |= RTL818X_CW_CONF_PERPACKET_RETRY; rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg); reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL); - reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT; - reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT; + /* TX antenna and TX gain are not on per-packet basis. + * TX Antenna is selected by ANTSEL reg (RX in BB regs). + * TX gain is selected with CCK_TX_AGC and OFDM_TX_AGC regs + */ + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN; + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL; reg |= RTL818X_TX_AGC_CTL_FEEDBACK_ANT; rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg); @@ -637,11 +1149,16 @@ static int rtl8180_start(struct ieee80211_hw *dev) reg |= (6 << 21 /* MAX TX DMA */) | RTL818X_TX_CONF_NO_ICV; - if (priv->r8185) + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + reg |= 1<<30; /* "duration procedure mode" */ + + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) reg &= ~RTL818X_TX_CONF_PROBE_DTS; else reg &= ~RTL818X_TX_CONF_HW_SEQNUM; + reg &= ~RTL818X_TX_CONF_DISCW; + /* different meaning, same value on both rtl8185 and rtl8180 */ reg &= ~RTL818X_TX_CONF_SAT_HWPLCP; @@ -656,7 +1173,7 @@ static int rtl8180_start(struct ieee80211_hw *dev) err_free_rings: rtl8180_free_rx_ring(dev); - for (i = 0; i < 4; i++) + for (i = 0; i < (dev->queues + 1); i++) if (priv->tx_ring[i].desc) rtl8180_free_tx_ring(dev, i); @@ -669,7 +1186,7 @@ static void rtl8180_stop(struct ieee80211_hw *dev) u8 reg; int i; - rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); + rtl8180_int_disable(dev); reg = rtl818x_ioread8(priv, &priv->map->CMD); reg &= ~RTL818X_CMD_TX_ENABLE; @@ -686,7 +1203,7 @@ static void rtl8180_stop(struct ieee80211_hw *dev) free_irq(priv->pdev->irq, dev); rtl8180_free_rx_ring(dev); - for (i = 0; i < 4; i++) + for (i = 0; i < (dev->queues + 1); i++) rtl8180_free_tx_ring(dev, i); } @@ -794,6 +1311,123 @@ static int rtl8180_config(struct ieee80211_hw *dev, u32 changed) return 0; } +static void rtl8187se_conf_ac_parm(struct ieee80211_hw *dev, u8 queue) +{ + const struct ieee80211_tx_queue_params *params; + struct rtl8180_priv *priv = dev->priv; + + /* hw value */ + u32 ac_param; + + u8 aifs; + u8 txop; + u8 cw_min, cw_max; + + params = &priv->queue_param[queue]; + + cw_min = fls(params->cw_min); + cw_max = fls(params->cw_max); + + aifs = 10 + params->aifs * priv->slot_time; + + /* TODO: check if txop HW is in us (mult by 32) */ + txop = params->txop; + + ac_param = txop << AC_PARAM_TXOP_LIMIT_SHIFT | + cw_max << AC_PARAM_ECW_MAX_SHIFT | + cw_min << AC_PARAM_ECW_MIN_SHIFT | + aifs << AC_PARAM_AIFS_SHIFT; + + switch (queue) { + case IEEE80211_AC_BK: + rtl818x_iowrite32(priv, &priv->map->AC_BK_PARAM, ac_param); + break; + case IEEE80211_AC_BE: + rtl818x_iowrite32(priv, &priv->map->AC_BE_PARAM, ac_param); + break; + case IEEE80211_AC_VI: + rtl818x_iowrite32(priv, &priv->map->AC_VI_PARAM, ac_param); + break; + case IEEE80211_AC_VO: + rtl818x_iowrite32(priv, &priv->map->AC_VO_PARAM, ac_param); + break; + } +} + +static int rtl8180_conf_tx(struct ieee80211_hw *dev, + struct ieee80211_vif *vif, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct rtl8180_priv *priv = dev->priv; + u8 cw_min, cw_max; + + /* nothing to do ? */ + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) + return 0; + + cw_min = fls(params->cw_min); + cw_max = fls(params->cw_max); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + priv->queue_param[queue] = *params; + rtl8187se_conf_ac_parm(dev, queue); + } else + rtl818x_iowrite8(priv, &priv->map->CW_VAL, + (cw_max << 4) | cw_min); + return 0; +} + +static void rtl8180_conf_erp(struct ieee80211_hw *dev, + struct ieee80211_bss_conf *info) +{ + struct rtl8180_priv *priv = dev->priv; + u8 sifs, difs; + int eifs; + u8 hw_eifs; + + /* TODO: should we do something ? */ + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) + return; + + /* I _hope_ this means 10uS for the HW. + * In reference code it is 0x22 for + * both rtl8187L and rtl8187SE + */ + sifs = 0x22; + + if (info->use_short_slot) + priv->slot_time = 9; + else + priv->slot_time = 20; + + /* 10 is SIFS time in uS */ + difs = 10 + 2 * priv->slot_time; + eifs = 10 + difs + priv->ack_time; + + /* HW should use 4uS units for EIFS (I'm sure for rtl8185)*/ + hw_eifs = DIV_ROUND_UP(eifs, 4); + + + rtl818x_iowrite8(priv, &priv->map->SLOT, priv->slot_time); + rtl818x_iowrite8(priv, &priv->map->SIFS, sifs); + rtl818x_iowrite8(priv, &priv->map->DIFS, difs); + + /* from reference code. set ack timeout reg = eifs reg */ + rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, hw_eifs); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + rtl818x_iowrite8(priv, &priv->map->EIFS_8187SE, hw_eifs); + else if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) { + /* rtl8187/rtl8185 HW bug. After EIFS is elapsed, + * the HW still wait for DIFS. + * HW uses 4uS units for EIFS. + */ + hw_eifs = DIV_ROUND_UP(eifs - difs, 4); + + rtl818x_iowrite8(priv, &priv->map->EIFS, hw_eifs); + } +} + static void rtl8180_bss_info_changed(struct ieee80211_hw *dev, struct ieee80211_vif *vif, struct ieee80211_bss_conf *info, @@ -818,11 +1452,40 @@ static void rtl8180_bss_info_changed(struct ieee80211_hw *dev, reg = RTL818X_MSR_INFRA; } else reg = RTL818X_MSR_NO_LINK; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + reg |= RTL818X_MSR_ENEDCA; + rtl818x_iowrite8(priv, &priv->map->MSR, reg); } - if (changed & BSS_CHANGED_ERP_SLOT && priv->rf->conf_erp) - priv->rf->conf_erp(dev, info); + if (changed & BSS_CHANGED_BASIC_RATES) + rtl8180_conf_basic_rates(dev, info->basic_rates); + + if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE)) { + + /* when preamble changes, acktime duration changes, and erp must + * be recalculated. ACK time is calculated at lowest rate. + * Since mac80211 include SIFS time we remove it (-10) + */ + priv->ack_time = + le16_to_cpu(ieee80211_generic_frame_duration(dev, + priv->vif, + IEEE80211_BAND_2GHZ, 10, + &priv->rates[0])) - 10; + + rtl8180_conf_erp(dev, info); + + /* mac80211 supplies aifs_n to driver and calls + * conf_tx callback whether aifs_n changes, NOT + * when aifs changes. + * Aifs should be recalculated if slot changes. + */ + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + for (i = 0; i < 4; i++) + rtl8187se_conf_ac_parm(dev, i); + } + } if (changed & BSS_CHANGED_BEACON_ENABLED) vif_priv->enable_beacon = info->enable_beacon; @@ -880,6 +1543,7 @@ static const struct ieee80211_ops rtl8180_ops = { .remove_interface = rtl8180_remove_interface, .config = rtl8180_config, .bss_info_changed = rtl8180_bss_info_changed, + .conf_tx = rtl8180_conf_tx, .prepare_multicast = rtl8180_prepare_multicast, .configure_filter = rtl8180_configure_filter, .get_tsf = rtl8180_get_tsf, @@ -887,8 +1551,7 @@ static const struct ieee80211_ops rtl8180_ops = { static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom) { - struct ieee80211_hw *dev = eeprom->data; - struct rtl8180_priv *priv = dev->priv; + struct rtl8180_priv *priv = eeprom->data; u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE; @@ -899,8 +1562,7 @@ static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom) static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom) { - struct ieee80211_hw *dev = eeprom->data; - struct rtl8180_priv *priv = dev->priv; + struct rtl8180_priv *priv = eeprom->data; u8 reg = 2 << 6; if (eeprom->reg_data_in) @@ -917,6 +1579,83 @@ static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom) udelay(10); } +static void rtl8180_eeprom_read(struct rtl8180_priv *priv) +{ + struct eeprom_93cx6 eeprom; + int eeprom_cck_table_adr; + u16 eeprom_val; + int i; + + eeprom.data = priv; + eeprom.register_read = rtl8180_eeprom_register_read; + eeprom.register_write = rtl8180_eeprom_register_write; + if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6)) + eeprom.width = PCI_EEPROM_WIDTH_93C66; + else + eeprom.width = PCI_EEPROM_WIDTH_93C46; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_PROGRAM); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(10); + + eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val); + eeprom_val &= 0xFF; + priv->rf_type = eeprom_val; + + eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val); + priv->csthreshold = eeprom_val >> 8; + + eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)priv->mac_addr, 3); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + eeprom_cck_table_adr = 0x30; + else + eeprom_cck_table_adr = 0x10; + + /* CCK TX power */ + for (i = 0; i < 14; i += 2) { + u16 txpwr; + eeprom_93cx6_read(&eeprom, eeprom_cck_table_adr + (i >> 1), + &txpwr); + priv->channels[i].hw_value = txpwr & 0xFF; + priv->channels[i + 1].hw_value = txpwr >> 8; + } + + /* OFDM TX power */ + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) { + for (i = 0; i < 14; i += 2) { + u16 txpwr; + eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr); + priv->channels[i].hw_value |= (txpwr & 0xFF) << 8; + priv->channels[i + 1].hw_value |= txpwr & 0xFF00; + } + } + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) { + __le32 anaparam; + eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2); + priv->anaparam = le32_to_cpu(anaparam); + eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam); + } + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + eeprom_93cx6_read(&eeprom, 0x3F, &eeprom_val); + priv->antenna_diversity_en = !!(eeprom_val & 0x100); + priv->antenna_diversity_default = (eeprom_val & 0xC00) == 0x400; + + eeprom_93cx6_read(&eeprom, 0x7C, &eeprom_val); + priv->xtal_out = eeprom_val & 0xF; + priv->xtal_in = (eeprom_val & 0xF0) >> 4; + priv->xtal_cal = !!(eeprom_val & 0x1000); + priv->thermal_meter_val = (eeprom_val & 0xF00) >> 8; + priv->thermal_meter_en = !!(eeprom_val & 0x2000); + } + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_NORMAL); +} + static int rtl8180_probe(struct pci_dev *pdev, const struct pci_device_id *id) { @@ -924,12 +1663,9 @@ static int rtl8180_probe(struct pci_dev *pdev, struct rtl8180_priv *priv; unsigned long mem_addr, mem_len; unsigned int io_addr, io_len; - int err, i; - struct eeprom_93cx6 eeprom; + int err; const char *chip_name, *rf_name = NULL; u32 reg; - u16 eeprom_val; - u8 mac_addr[ETH_ALEN]; err = pci_enable_device(pdev); if (err) { @@ -1011,7 +1747,6 @@ static int rtl8180_probe(struct pci_dev *pdev, dev->vif_data_size = sizeof(struct rtl8180_vif); dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); - dev->queues = 1; dev->max_signal = 65; reg = rtl818x_ioread32(priv, &priv->map->TX_CONF); @@ -1019,43 +1754,55 @@ static int rtl8180_probe(struct pci_dev *pdev, switch (reg) { case RTL818X_TX_CONF_R8180_ABCD: chip_name = "RTL8180"; + priv->chip_family = RTL818X_CHIP_FAMILY_RTL8180; break; + case RTL818X_TX_CONF_R8180_F: chip_name = "RTL8180vF"; + priv->chip_family = RTL818X_CHIP_FAMILY_RTL8180; break; + case RTL818X_TX_CONF_R8185_ABC: chip_name = "RTL8185"; + priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185; break; + case RTL818X_TX_CONF_R8185_D: chip_name = "RTL8185vD"; + priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185; + break; + + case RTL818X_TX_CONF_RTL8187SE: + chip_name = "RTL8187SE"; + priv->chip_family = RTL818X_CHIP_FAMILY_RTL8187SE; break; + default: printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n", pci_name(pdev), reg >> 25); goto err_iounmap; } - priv->r8185 = reg & RTL818X_TX_CONF_R8185_ABC; - if (priv->r8185) { + /* we declare to MAC80211 all the queues except for beacon queue + * that will be eventually handled by DRV. + * TX rings are arranged in such a way that lower is the IDX, + * higher is the priority, in order to achieve direct mapping + * with mac80211, however the beacon queue is an exception and it + * is mapped on the highst tx ring IDX. + */ + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + dev->queues = RTL8187SE_NR_TX_QUEUES - 1; + else + dev->queues = RTL8180_NR_TX_QUEUES - 1; + + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) { priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates); pci_try_set_mwi(pdev); } - eeprom.data = dev; - eeprom.register_read = rtl8180_eeprom_register_read; - eeprom.register_write = rtl8180_eeprom_register_write; - if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6)) - eeprom.width = PCI_EEPROM_WIDTH_93C66; - else - eeprom.width = PCI_EEPROM_WIDTH_93C46; - - rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_PROGRAM); - rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); - udelay(10); + rtl8180_eeprom_read(priv); - eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val); - eeprom_val &= 0xFF; - switch (eeprom_val) { + switch (priv->rf_type) { case 1: rf_name = "Intersil"; break; case 2: rf_name = "RFMD"; @@ -1066,14 +1813,18 @@ static int rtl8180_probe(struct pci_dev *pdev, break; case 5: priv->rf = &grf5101_rf_ops; break; - case 9: priv->rf = rtl8180_detect_rf(dev); + case 9: + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + priv->rf = rtl8187se_detect_rf(dev); + else + priv->rf = rtl8180_detect_rf(dev); break; case 10: rf_name = "RTL8255"; break; default: printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n", - pci_name(pdev), eeprom_val); + pci_name(pdev), priv->rf_type); goto err_iounmap; } @@ -1083,42 +1834,12 @@ static int rtl8180_probe(struct pci_dev *pdev, goto err_iounmap; } - eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val); - priv->csthreshold = eeprom_val >> 8; - if (!priv->r8185) { - __le32 anaparam; - eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2); - priv->anaparam = le32_to_cpu(anaparam); - eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam); - } - - eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)mac_addr, 3); - if (!is_valid_ether_addr(mac_addr)) { + if (!is_valid_ether_addr(priv->mac_addr)) { printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using" " randomly generated MAC addr\n", pci_name(pdev)); - eth_random_addr(mac_addr); - } - SET_IEEE80211_PERM_ADDR(dev, mac_addr); - - /* CCK TX power */ - for (i = 0; i < 14; i += 2) { - u16 txpwr; - eeprom_93cx6_read(&eeprom, 0x10 + (i >> 1), &txpwr); - priv->channels[i].hw_value = txpwr & 0xFF; - priv->channels[i + 1].hw_value = txpwr >> 8; - } - - /* OFDM TX power */ - if (priv->r8185) { - for (i = 0; i < 14; i += 2) { - u16 txpwr; - eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr); - priv->channels[i].hw_value |= (txpwr & 0xFF) << 8; - priv->channels[i + 1].hw_value |= txpwr & 0xFF00; - } + eth_random_addr(priv->mac_addr); } - - rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + SET_IEEE80211_PERM_ADDR(dev, priv->mac_addr); spin_lock_init(&priv->lock); @@ -1130,12 +1851,12 @@ static int rtl8180_probe(struct pci_dev *pdev, } wiphy_info(dev->wiphy, "hwaddr %pm, %s + %s\n", - mac_addr, chip_name, priv->rf->name); + priv->mac_addr, chip_name, priv->rf->name); return 0; err_iounmap: - iounmap(priv->map); + pci_iounmap(pdev, priv->map); err_free_dev: ieee80211_free_hw(dev); |