aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r--drivers/net/wireless/airo_cs.c55
-rw-r--r--drivers/net/wireless/atmel_cs.c51
-rw-r--r--drivers/net/wireless/b43/pcmcia.c26
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c51
-rw-r--r--drivers/net/wireless/libertas/if_cs.c72
-rw-r--r--drivers/net/wireless/netwave_cs.c95
-rw-r--r--drivers/net/wireless/orinoco/orinoco_cs.c33
-rw-r--r--drivers/net/wireless/orinoco/spectrum_cs.c60
-rw-r--r--drivers/net/wireless/ray_cs.c357
-rw-r--r--drivers/net/wireless/wavelan_cs.c35
-rw-r--r--drivers/net/wireless/wl3501_cs.c74
11 files changed, 362 insertions, 547 deletions
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index d0593ed9170e..f6036fb42319 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -43,21 +43,6 @@
#include "airo.h"
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-static char *version = "$Revision: 1.2 $";
-#define DEBUG(n, args...) if (pc_debug > (n)) printk(KERN_DEBUG args);
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -145,11 +130,10 @@ static int airo_probe(struct pcmcia_device *p_dev)
{
local_info_t *local;
- DEBUG(0, "airo_attach()\n");
+ dev_dbg(&p_dev->dev, "airo_attach()\n");
/* Interrupt setup */
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
p_dev->irq.Handler = NULL;
/*
@@ -184,7 +168,7 @@ static int airo_probe(struct pcmcia_device *p_dev)
static void airo_detach(struct pcmcia_device *link)
{
- DEBUG(0, "airo_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "airo_detach\n");
airo_release(link);
@@ -204,9 +188,6 @@ static void airo_detach(struct pcmcia_device *link)
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int airo_cs_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
@@ -275,11 +256,11 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
req->Base = mem->win[0].host_addr;
req->Size = mem->win[0].len;
req->AccessSpeed = 0;
- if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0)
+ if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0)
return -ENODEV;
map.Page = 0;
map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(p_dev->win, &map) != 0)
+ if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0)
return -ENODEV;
}
/* If we got this far, we're cool! */
@@ -291,11 +272,11 @@ static int airo_config(struct pcmcia_device *link)
{
local_info_t *dev;
win_req_t *req;
- int last_fn, last_ret;
+ int ret;
dev = link->priv;
- DEBUG(0, "airo_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "airo_config\n");
req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
if (!req)
@@ -315,8 +296,8 @@ static int airo_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- last_ret = pcmcia_loop_config(link, airo_cs_config_check, req);
- if (last_ret)
+ ret = pcmcia_loop_config(link, airo_cs_config_check, req);
+ if (ret)
goto failed;
/*
@@ -324,21 +305,25 @@ static int airo_config(struct pcmcia_device *link)
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
- if (link->conf.Attributes & CONF_ENABLE_IRQ)
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+ }
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
((local_info_t *)link->priv)->eth_dev =
init_airo_card(link->irq.AssignedIRQ,
- link->io.BasePort1, 1, &handle_to_dev(link));
+ link->io.BasePort1, 1, &link->dev);
if (!((local_info_t *)link->priv)->eth_dev)
- goto cs_failed;
+ goto failed;
/*
At this point, the dev_node_t structure(s) need to be
@@ -368,8 +353,6 @@ static int airo_config(struct pcmcia_device *link)
kfree(req);
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
airo_release(link);
kfree(req);
@@ -386,7 +369,7 @@ static int airo_config(struct pcmcia_device *link)
static void airo_release(struct pcmcia_device *link)
{
- DEBUG(0, "airo_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "airo_release\n");
pcmcia_disable_device(link);
}
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index ddaa859c3491..32407911842f 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -55,22 +55,6 @@
#include "atmel.h"
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-static char *version = "$Revision: 1.2 $";
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -155,11 +139,10 @@ static int atmel_probe(struct pcmcia_device *p_dev)
{
local_info_t *local;
- DEBUG(0, "atmel_attach()\n");
+ dev_dbg(&p_dev->dev, "atmel_attach()\n");
/* Interrupt setup */
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
p_dev->irq.Handler = NULL;
/*
@@ -194,7 +177,7 @@ static int atmel_probe(struct pcmcia_device *p_dev)
static void atmel_detach(struct pcmcia_device *link)
{
- DEBUG(0, "atmel_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "atmel_detach\n");
atmel_release(link);
@@ -209,9 +192,6 @@ static void atmel_detach(struct pcmcia_device *link)
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
/* Call-back function to interrogate PCMCIA-specific information
about the current existance of the card */
static int card_present(void *arg)
@@ -275,13 +255,13 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
static int atmel_config(struct pcmcia_device *link)
{
local_info_t *dev;
- int last_fn, last_ret;
+ int ret;
struct pcmcia_device_id *did;
dev = link->priv;
- did = dev_get_drvdata(&handle_to_dev(link));
+ did = dev_get_drvdata(&link->dev);
- DEBUG(0, "atmel_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "atmel_config\n");
/*
In this loop, we scan the CIS for configuration table entries,
@@ -303,31 +283,36 @@ static int atmel_config(struct pcmcia_device *link)
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
- if (link->conf.Attributes & CONF_ENABLE_IRQ)
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+ }
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
if (link->irq.AssignedIRQ == 0) {
printk(KERN_ALERT
"atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
- goto cs_failed;
+ goto failed;
}
((local_info_t*)link->priv)->eth_dev =
init_atmel_card(link->irq.AssignedIRQ,
link->io.BasePort1,
did ? did->driver_info : ATMEL_FW_TYPE_NONE,
- &handle_to_dev(link),
+ &link->dev,
card_present,
link);
if (!((local_info_t*)link->priv)->eth_dev)
- goto cs_failed;
+ goto failed;
/*
@@ -340,8 +325,6 @@ static int atmel_config(struct pcmcia_device *link)
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
atmel_release(link);
return -ENODEV;
@@ -359,7 +342,7 @@ static void atmel_release(struct pcmcia_device *link)
{
struct net_device *dev = ((local_info_t*)link->priv)->eth_dev;
- DEBUG(0, "atmel_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "atmel_release\n");
if (dev)
stop_atmel_card(dev);
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 6c3a74964ab8..984174bc7b0f 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -65,35 +65,15 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
struct ssb_bus *ssb;
win_req_t win;
memreq_t mem;
- tuple_t tuple;
- cisparse_t parse;
int err = -ENOMEM;
int res = 0;
- unsigned char buf[64];
ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
if (!ssb)
goto out_error;
err = -ENODEV;
- tuple.DesiredTuple = CISTPL_CONFIG;
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- res = pcmcia_get_first_tuple(dev, &tuple);
- if (res != 0)
- goto err_kfree_ssb;
- res = pcmcia_get_tuple_data(dev, &tuple);
- if (res != 0)
- goto err_kfree_ssb;
- res = pcmcia_parse_tuple(&tuple, &parse);
- if (res != 0)
- goto err_kfree_ssb;
-
- dev->conf.ConfigBase = parse.config.base;
- dev->conf.Present = parse.config.rmask[0];
dev->conf.Attributes = CONF_ENABLE_IRQ;
dev->conf.IntType = INT_MEMORY_AND_IO;
@@ -107,20 +87,18 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
win.Base = 0;
win.Size = SSB_CORE_SIZE;
win.AccessSpeed = 250;
- res = pcmcia_request_window(&dev, &win, &dev->win);
+ res = pcmcia_request_window(dev, &win, &dev->win);
if (res != 0)
goto err_kfree_ssb;
mem.CardOffset = 0;
mem.Page = 0;
- res = pcmcia_map_mem_page(dev->win, &mem);
+ res = pcmcia_map_mem_page(dev, dev->win, &mem);
if (res != 0)
goto err_disable;
dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
dev->irq.Handler = NULL; /* The handler is registered later. */
- dev->irq.Instance = NULL;
res = pcmcia_request_irq(dev, &dev->irq);
if (res != 0)
goto err_disable;
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index ad8eab4a639b..c9640a3e02c9 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -274,9 +274,6 @@ static int sandisk_enable_wireless(struct net_device *dev)
conf_reg_t reg;
struct hostap_interface *iface = netdev_priv(dev);
local_info_t *local = iface->local;
- tuple_t tuple;
- cisparse_t *parse = NULL;
- u_char buf[64];
struct hostap_cs_priv *hw_priv = local->hw_priv;
if (hw_priv->link->io.NumPorts1 < 0x42) {
@@ -285,28 +282,13 @@ static int sandisk_enable_wireless(struct net_device *dev)
goto done;
}
- parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
- if (parse == NULL) {
- ret = -ENOMEM;
- goto done;
- }
-
- tuple.Attributes = TUPLE_RETURN_COMMON;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
if (hw_priv->link->manf_id != 0xd601 || hw_priv->link->card_id != 0x0101) {
/* No SanDisk manfid found */
ret = -ENODEV;
goto done;
}
- tuple.DesiredTuple = CISTPL_LONGLINK_MFC;
- if (pcmcia_get_first_tuple(hw_priv->link, &tuple) ||
- pcmcia_get_tuple_data(hw_priv->link, &tuple) ||
- pcmcia_parse_tuple(&tuple, parse) ||
- parse->longlink_mfc.nfn < 2) {
+ if (hw_priv->link->socket->functions < 2) {
/* No multi-function links found */
ret = -ENODEV;
goto done;
@@ -354,7 +336,6 @@ static int sandisk_enable_wireless(struct net_device *dev)
udelay(10);
done:
- kfree(parse);
return ret;
}
@@ -529,10 +510,6 @@ static void prism2_detach(struct pcmcia_device *link)
}
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
-
/* run after a CARD_INSERTION event is received to configure the PCMCIA
* socket and make the device available to the system */
@@ -624,7 +601,6 @@ static int prism2_config(struct pcmcia_device *link)
struct hostap_interface *iface;
local_info_t *local;
int ret = 1;
- int last_fn, last_ret;
struct hostap_cs_priv *hw_priv;
PDEBUG(DEBUG_FLOW, "prism2_config()\n");
@@ -636,19 +612,18 @@ static int prism2_config(struct pcmcia_device *link)
}
/* Look for an appropriate configuration table entry in the CIS */
- last_ret = pcmcia_loop_config(link, prism2_config_check, NULL);
- if (last_ret) {
+ ret = pcmcia_loop_config(link, prism2_config_check, NULL);
+ if (ret) {
if (!ignore_cis_vcc)
printk(KERN_ERR "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- cs_error(link, RequestIO, last_ret);
goto failed;
}
/* Need to allocate net_device before requesting IRQ handler */
dev = prism2_init_local_data(&prism2_pccard_funcs, 0,
- &handle_to_dev(link));
+ &link->dev);
if (dev == NULL)
goto failed;
link->priv = dev;
@@ -666,13 +641,11 @@ static int prism2_config(struct pcmcia_device *link)
* irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING |
- IRQ_HANDLE_PRESENT;
- link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = prism2_interrupt;
- link->irq.Instance = dev;
- CS_CHECK(RequestIRQ,
- pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
}
/*
@@ -680,8 +653,9 @@ static int prism2_config(struct pcmcia_device *link)
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
@@ -714,9 +688,6 @@ static int prism2_config(struct pcmcia_device *link)
}
return ret;
- cs_failed:
- cs_error(link, last_fn, last_ret);
-
failed:
kfree(hw_priv);
prism2_release((u_long)link);
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 62381768f2d5..b1d84592b959 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -590,7 +590,7 @@ static int if_cs_prog_helper(struct if_cs_card *card)
/* TODO: make firmware file configurable */
ret = request_firmware(&fw, "libertas_cs_helper.fw",
- &handle_to_dev(card->p_dev));
+ &card->p_dev->dev);
if (ret) {
lbs_pr_err("can't load helper firmware\n");
ret = -ENODEV;
@@ -663,7 +663,7 @@ static int if_cs_prog_real(struct if_cs_card *card)
/* TODO: make firmware file configurable */
ret = request_firmware(&fw, "libertas_cs.fw",
- &handle_to_dev(card->p_dev));
+ &card->p_dev->dev);
if (ret) {
lbs_pr_err("can't load firmware\n");
ret = -ENODEV;
@@ -793,18 +793,37 @@ static void if_cs_release(struct pcmcia_device *p_dev)
* configure the card at this point -- we wait until we receive a card
* insertion event.
*/
+
+static int if_cs_ioprobe(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ p_dev->io.BasePort1 = cfg->io.win[0].base;
+ p_dev->io.NumPorts1 = cfg->io.win[0].len;
+
+ /* Do we need to allocate an interrupt? */
+ if (cfg->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ if (cfg->io.nwin != 1) {
+ lbs_pr_err("wrong CIS (check number of IO windows)\n");
+ return -ENODEV;
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int if_cs_probe(struct pcmcia_device *p_dev)
{
int ret = -ENOMEM;
unsigned int prod_id;
struct lbs_private *priv;
struct if_cs_card *card;
- /* CIS parsing */
- tuple_t tuple;
- cisparse_t parse;
- cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
- cistpl_io_t *io = &cfg->io;
- u_char buf[64];
lbs_deb_enter(LBS_DEB_CS);
@@ -818,48 +837,15 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
p_dev->irq.Handler = NULL;
- p_dev->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
p_dev->conf.Attributes = 0;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- if ((ret = pcmcia_get_first_tuple(p_dev, &tuple)) != 0 ||
- (ret = pcmcia_get_tuple_data(p_dev, &tuple)) != 0 ||
- (ret = pcmcia_parse_tuple(&tuple, &parse)) != 0)
- {
- lbs_pr_err("error in pcmcia_get_first_tuple etc\n");
- goto out1;
- }
-
- p_dev->conf.ConfigIndex = cfg->index;
-
- /* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1) {
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
- }
-
- /* IO window settings */
- if (cfg->io.nwin != 1) {
- lbs_pr_err("wrong CIS (check number of IO windows)\n");
- ret = -ENODEV;
+ if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) {
+ lbs_pr_err("error in pcmcia_loop_config\n");
goto out1;
}
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
- /* This reserves IO space but doesn't actually enable it */
- ret = pcmcia_request_io(p_dev, &p_dev->io);
- if (ret) {
- lbs_pr_err("error in pcmcia_request_io\n");
- goto out1;
- }
/*
* Allocate an interrupt line. Note that this does not assign
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index 9498b46c99a4..e61e6b9440ab 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -145,23 +145,6 @@ static const unsigned int txConfEUD = 0x10; /* Enable Uni-Data packets */
static const unsigned int txConfKey = 0x02; /* Scramble data packets */
static const unsigned int txConfLoop = 0x01; /* Loopback mode */
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"netwave_cs.c 0.3.0 Thu Jul 17 14:36:02 1997 (John Markus Bjørndalen)\n";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -383,7 +366,7 @@ static int netwave_probe(struct pcmcia_device *link)
struct net_device *dev;
netwave_private *priv;
- DEBUG(0, "netwave_attach()\n");
+ dev_dbg(&link->dev, "netwave_attach()\n");
/* Initialize the struct pcmcia_device structure */
dev = alloc_etherdev(sizeof(netwave_private));
@@ -401,8 +384,7 @@ static int netwave_probe(struct pcmcia_device *link)
link->io.IOAddrLines = 5;
/* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
- link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = &netwave_interrupt;
/* General socket configuration */
@@ -421,8 +403,6 @@ static int netwave_probe(struct pcmcia_device *link)
dev->watchdog_timeo = TX_TIMEOUT;
- link->irq.Instance = dev;
-
return netwave_pcmcia_config( link);
} /* netwave_attach */
@@ -438,7 +418,7 @@ static void netwave_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- DEBUG(0, "netwave_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "netwave_detach\n");
netwave_release(link);
@@ -725,18 +705,15 @@ static const struct iw_handler_def netwave_handler_def =
*
*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int netwave_pcmcia_config(struct pcmcia_device *link) {
struct net_device *dev = link->priv;
netwave_private *priv = netdev_priv(dev);
- int i, j, last_ret, last_fn;
+ int i, j, ret;
win_req_t req;
memreq_t mem;
u_char __iomem *ramBase = NULL;
- DEBUG(0, "netwave_pcmcia_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "netwave_pcmcia_config\n");
/*
* Try allocating IO ports. This tries a few fixed addresses.
@@ -749,22 +726,24 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
if (i == 0)
break;
}
- if (i != 0) {
- cs_error(link, RequestIO, i);
+ if (i != 0)
goto failed;
- }
/*
* Now allocate an interrupt line. Note that this does not
* actually assign a handler to the interrupt.
*/
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
/*
* This actually configures the PCMCIA socket -- setting up
* the I/O windows and the interrupt mapping.
*/
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/*
* Allocate a 32K memory window. Note that the struct pcmcia_device
@@ -772,14 +751,18 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
* device needs several windows, you'll need to keep track of
* the handles in your private data structure, dev->priv.
*/
- DEBUG(1, "Setting mem speed of %d\n", mem_speed);
+ dev_dbg(&link->dev, "Setting mem speed of %d\n", mem_speed);
req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
req.Base = 0; req.Size = 0x8000;
req.AccessSpeed = mem_speed;
- CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
+ ret = pcmcia_request_window(link, &req, &link->win);
+ if (ret)
+ goto failed;
mem.CardOffset = 0x20000; mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
+ ret = pcmcia_map_mem_page(link, link->win, &mem);
+ if (ret)
+ goto failed;
/* Store base address of the common window frame */
ramBase = ioremap(req.Base, 0x8000);
@@ -787,7 +770,7 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
- SET_NETDEV_DEV(dev, &handle_to_dev(link));
+ SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
printk(KERN_DEBUG "netwave_cs: register_netdev() failed\n");
@@ -818,8 +801,6 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
get_uint16(ramBase + NETWAVE_EREG_ARW+2));
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
netwave_release(link);
return -ENODEV;
@@ -837,7 +818,7 @@ static void netwave_release(struct pcmcia_device *link)
struct net_device *dev = link->priv;
netwave_private *priv = netdev_priv(dev);
- DEBUG(0, "netwave_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "netwave_release\n");
pcmcia_disable_device(link);
if (link->win)
@@ -892,7 +873,7 @@ static void netwave_reset(struct net_device *dev) {
u_char __iomem *ramBase = priv->ramBase;
unsigned int iobase = dev->base_addr;
- DEBUG(0, "netwave_reset: Done with hardware reset\n");
+ pr_debug("netwave_reset: Done with hardware reset\n");
priv->timeoutCounter = 0;
@@ -988,7 +969,7 @@ static int netwave_hw_xmit(unsigned char* data, int len,
dev->stats.tx_bytes += len;
- DEBUG(3, "Transmitting with SPCQ %x SPU %x LIF %x ISPLQ %x\n",
+ pr_debug("Transmitting with SPCQ %x SPU %x LIF %x ISPLQ %x\n",
readb(ramBase + NETWAVE_EREG_SPCQ),
readb(ramBase + NETWAVE_EREG_SPU),
readb(ramBase + NETWAVE_EREG_LIF),
@@ -1000,7 +981,7 @@ static int netwave_hw_xmit(unsigned char* data, int len,
MaxData = get_uint16(ramBase + NETWAVE_EREG_TDP+2);
DataOffset = get_uint16(ramBase + NETWAVE_EREG_TDP+4);
- DEBUG(3, "TxFreeList %x, MaxData %x, DataOffset %x\n",
+ pr_debug("TxFreeList %x, MaxData %x, DataOffset %x\n",
TxFreeList, MaxData, DataOffset);
/* Copy packet to the adapter fragment buffers */
@@ -1088,7 +1069,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
status = inb(iobase + NETWAVE_REG_ASR);
if (!pcmcia_dev_present(link)) {
- DEBUG(1, "netwave_interrupt: Interrupt with status 0x%x "
+ pr_debug("netwave_interrupt: Interrupt with status 0x%x "
"from removed or suspended card!\n", status);
break;
}
@@ -1132,7 +1113,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
int txStatus;
txStatus = readb(ramBase + NETWAVE_EREG_TSER);
- DEBUG(3, "Transmit done. TSER = %x id %x\n",
+ pr_debug("Transmit done. TSER = %x id %x\n",
txStatus, readb(ramBase + NETWAVE_EREG_TSER + 1));
if (txStatus & 0x20) {
@@ -1156,7 +1137,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
* TxGU and TxNOAP is set. (Those are the only ones
* to set TxErr).
*/
- DEBUG(3, "netwave_interrupt: TxDN with error status %x\n",
+ pr_debug("netwave_interrupt: TxDN with error status %x\n",
txStatus);
/* Clear out TxGU, TxNOAP, TxErr and TxTrys */
@@ -1164,7 +1145,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
writeb(0xdf & txStatus, ramBase+NETWAVE_EREG_TSER+4);
++dev->stats.tx_errors;
}
- DEBUG(3, "New status is TSER %x ASR %x\n",
+ pr_debug("New status is TSER %x ASR %x\n",
readb(ramBase + NETWAVE_EREG_TSER),
inb(iobase + NETWAVE_REG_ASR));
@@ -1172,7 +1153,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
}
/* TxBA, this would trigger on all error packets received */
/* if (status & 0x01) {
- DEBUG(4, "Transmit buffers available, %x\n", status);
+ pr_debug("Transmit buffers available, %x\n", status);
}
*/
}
@@ -1190,7 +1171,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
*/
static void netwave_watchdog(struct net_device *dev) {
- DEBUG(1, "%s: netwave_watchdog: watchdog timer expired\n", dev->name);
+ pr_debug("%s: netwave_watchdog: watchdog timer expired\n", dev->name);
netwave_reset(dev);
dev->trans_start = jiffies;
netif_wake_queue(dev);
@@ -1211,7 +1192,7 @@ static int netwave_rx(struct net_device *dev)
int i;
u_char *ptr;
- DEBUG(3, "xinw_rx: Receiving ... \n");
+ pr_debug("xinw_rx: Receiving ... \n");
/* Receive max 10 packets for now. */
for (i = 0; i < 10; i++) {
@@ -1237,7 +1218,7 @@ static int netwave_rx(struct net_device *dev)
skb = dev_alloc_skb(rcvLen+5);
if (skb == NULL) {
- DEBUG(1, "netwave_rx: Could not allocate an sk_buff of "
+ pr_debug("netwave_rx: Could not allocate an sk_buff of "
"length %d\n", rcvLen);
++dev->stats.rx_dropped;
/* Tell the adapter to skip the packet */
@@ -1279,7 +1260,7 @@ static int netwave_rx(struct net_device *dev)
wait_WOC(iobase);
writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0);
writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
- DEBUG(3, "Packet reception ok\n");
+ pr_debug("Packet reception ok\n");
}
return 0;
}
@@ -1288,7 +1269,7 @@ static int netwave_open(struct net_device *dev) {
netwave_private *priv = netdev_priv(dev);
struct pcmcia_device *link = priv->p_dev;
- DEBUG(1, "netwave_open: starting.\n");
+ dev_dbg(&link->dev, "netwave_open: starting.\n");
if (!pcmcia_dev_present(link))
return -ENODEV;
@@ -1305,7 +1286,7 @@ static int netwave_close(struct net_device *dev) {
netwave_private *priv = netdev_priv(dev);
struct pcmcia_device *link = priv->p_dev;
- DEBUG(1, "netwave_close: finishing.\n");
+ dev_dbg(&link->dev, "netwave_close: finishing.\n");
link->open--;
netif_stop_queue(dev);
@@ -1358,11 +1339,11 @@ static void set_multicast_list(struct net_device *dev)
u_char rcvMode = 0;
#ifdef PCMCIA_DEBUG
- if (pc_debug > 2) {
- static int old;
+ {
+ xstatic int old;
if (old != dev->mc_count) {
old = dev->mc_count;
- DEBUG(0, "%s: setting Rx mode to %d addresses.\n",
+ pr_debug("%s: setting Rx mode to %d addresses.\n",
dev->name, dev->mc_count);
}
}
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 38c1c9d2abb8..f27bb8367c98 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -109,7 +109,7 @@ orinoco_cs_probe(struct pcmcia_device *link)
struct orinoco_private *priv;
struct orinoco_pccard *card;
- priv = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
+ priv = alloc_orinocodev(sizeof(*card), &link->dev,
orinoco_cs_hard_reset, NULL);
if (!priv)
return -ENOMEM;
@@ -120,10 +120,8 @@ orinoco_cs_probe(struct pcmcia_device *link)
link->priv = priv;
/* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
- link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = orinoco_interrupt;
- link->irq.Instance = priv;
/* General socket configuration defaults can go here. In this
* client, we assume very little, and rely on the CIS for
@@ -160,12 +158,6 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
* device available to the system.
*/
-#define CS_CHECK(fn, ret) do { \
- last_fn = (fn); \
- if ((last_ret = (ret)) != 0) \
- goto cs_failed; \
-} while (0)
-
static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
@@ -240,7 +232,7 @@ orinoco_cs_config(struct pcmcia_device *link)
struct orinoco_private *priv = link->priv;
struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
- int last_fn, last_ret;
+ int ret;
void __iomem *mem;
/*
@@ -257,13 +249,12 @@ orinoco_cs_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
- if (last_ret) {
+ ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
+ if (ret) {
if (!ignore_cis_vcc)
printk(KERN_ERR PFX "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- cs_error(link, RequestIO, last_ret);
goto failed;
}
@@ -272,14 +263,16 @@ orinoco_cs_config(struct pcmcia_device *link)
* a handler to the interrupt, unless the 'Handler' member of
* the irq structure is initialized.
*/
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
/* We initialize the hermes structure before completing PCMCIA
* configuration just in case the interrupt handler gets
* called. */
mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
if (!mem)
- goto cs_failed;
+ goto failed;
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
@@ -288,8 +281,9 @@ orinoco_cs_config(struct pcmcia_device *link)
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/* Ok, we have the configuration, prepare to register the netdev */
card->node.major = card->node.minor = 0;
@@ -315,9 +309,6 @@ orinoco_cs_config(struct pcmcia_device *link)
* net_device has been registered */
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
-
failed:
orinoco_cs_release(link);
return -ENODEV;
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index c361310b885d..59bda240fdc2 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -73,9 +73,6 @@ static void spectrum_cs_release(struct pcmcia_device *link);
#define HCR_MEM16 0x10 /* memory width bit, should be preserved */
-#define CS_CHECK(fn, ret) \
- do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
/*
* Reset the card using configuration registers COR and CCSR.
* If IDLE is 1, stop the firmware, so that it can be safely rewritten.
@@ -83,7 +80,7 @@ static void spectrum_cs_release(struct pcmcia_device *link);
static int
spectrum_reset(struct pcmcia_device *link, int idle)
{
- int last_ret, last_fn;
+ int ret;
conf_reg_t reg;
u_int save_cor;
@@ -95,23 +92,26 @@ spectrum_reset(struct pcmcia_device *link, int idle)
reg.Function = 0;
reg.Action = CS_READ;
reg.Offset = CISREG_COR;
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, &reg));
+ ret = pcmcia_access_configuration_register(link, &reg);
+ if (ret)
+ goto failed;
save_cor = reg.Value;
/* Soft-Reset card */
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
reg.Value = (save_cor | COR_SOFT_RESET);
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, &reg));
+ ret = pcmcia_access_configuration_register(link, &reg);
+ if (ret)
+ goto failed;
udelay(1000);
/* Read CCSR */
reg.Action = CS_READ;
reg.Offset = CISREG_CCSR;
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, &reg));
+ ret = pcmcia_access_configuration_register(link, &reg);
+ if (ret)
+ goto failed;
/*
* Start or stop the firmware. Memory width bit should be
@@ -120,21 +120,22 @@ spectrum_reset(struct pcmcia_device *link, int idle)
reg.Action = CS_WRITE;
reg.Offset = CISREG_CCSR;
reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16);
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, &reg));
+ ret = pcmcia_access_configuration_register(link, &reg);
+ if (ret)
+ goto failed;
udelay(1000);
/* Restore original COR configuration index */
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
reg.Value = (save_cor & ~COR_SOFT_RESET);
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, &reg));
+ ret = pcmcia_access_configuration_register(link, &reg);
+ if (ret)
+ goto failed;
udelay(1000);
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
+failed:
return -ENODEV;
}
@@ -181,7 +182,7 @@ spectrum_cs_probe(struct pcmcia_device *link)
struct orinoco_private *priv;
struct orinoco_pccard *card;
- priv = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
+ priv = alloc_orinocodev(sizeof(*card), &link->dev,
spectrum_cs_hard_reset,
spectrum_cs_stop_firmware);
if (!priv)
@@ -193,10 +194,8 @@ spectrum_cs_probe(struct pcmcia_device *link)
link->priv = priv;
/* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
- link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = orinoco_interrupt;
- link->irq.Instance = priv;
/* General socket configuration defaults can go here. In this
* client, we assume very little, and rely on the CIS for
@@ -307,7 +306,7 @@ spectrum_cs_config(struct pcmcia_device *link)
struct orinoco_private *priv = link->priv;
struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
- int last_fn, last_ret;
+ int ret;
void __iomem *mem;
/*
@@ -324,13 +323,12 @@ spectrum_cs_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
- if (last_ret) {
+ ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
+ if (ret) {
if (!ignore_cis_vcc)
printk(KERN_ERR PFX "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- cs_error(link, RequestIO, last_ret);
goto failed;
}
@@ -339,14 +337,16 @@ spectrum_cs_config(struct pcmcia_device *link)
* a handler to the interrupt, unless the 'Handler' member of
* the irq structure is initialized.
*/
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
/* We initialize the hermes structure before completing PCMCIA
* configuration just in case the interrupt handler gets
* called. */
mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
if (!mem)
- goto cs_failed;
+ goto failed;
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
@@ -355,8 +355,9 @@ spectrum_cs_config(struct pcmcia_device *link)
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/* Ok, we have the configuration, prepare to register the netdev */
card->node.major = card->node.minor = 0;
@@ -386,9 +387,6 @@ spectrum_cs_config(struct pcmcia_device *link)
* net_device has been registered */
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
-
failed:
spectrum_cs_release(link);
return -ENODEV;
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 1c88c2ea59aa..5b8e3e4cdd9f 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -71,25 +71,7 @@ typedef u_char mac_addr[ETH_ALEN]; /* Hardware address */
#include "rayctl.h"
#include "ray_cs.h"
-/* All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-#ifdef RAYLINK_DEBUG
-#define PCMCIA_DEBUG RAYLINK_DEBUG
-#endif
-#ifdef PCMCIA_DEBUG
-static int ray_debug;
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-/* #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); */
-#define DEBUG(n, args...) if (pc_debug > (n)) printk(args);
-#else
-#define DEBUG(n, args...)
-#endif
/** Prototypes based on PCMCIA skeleton driver *******************************/
static int ray_config(struct pcmcia_device *link);
static void ray_release(struct pcmcia_device *link);
@@ -325,7 +307,7 @@ static int ray_probe(struct pcmcia_device *p_dev)
ray_dev_t *local;
struct net_device *dev;
- DEBUG(1, "ray_attach()\n");
+ dev_dbg(&p_dev->dev, "ray_attach()\n");
/* Allocate space for private device-specific data */
dev = alloc_etherdev(sizeof(ray_dev_t));
@@ -341,8 +323,7 @@ static int ray_probe(struct pcmcia_device *p_dev)
p_dev->io.IOAddrLines = 5;
/* Interrupt setup. For PCMCIA, driver takes what's given */
- p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
- p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
p_dev->irq.Handler = &ray_interrupt;
/* General socket configuration */
@@ -351,13 +332,12 @@ static int ray_probe(struct pcmcia_device *p_dev)
p_dev->conf.ConfigIndex = 1;
p_dev->priv = dev;
- p_dev->irq.Instance = dev;
local->finder = p_dev;
local->card_status = CARD_INSERTED;
local->authentication_state = UNAUTHENTICATED;
local->num_multi = 0;
- DEBUG(2, "ray_attach p_dev = %p, dev = %p, local = %p, intr = %p\n",
+ dev_dbg(&p_dev->dev, "ray_attach p_dev = %p, dev = %p, local = %p, intr = %p\n",
p_dev, dev, local, &ray_interrupt);
/* Raylink entries in the device structure */
@@ -370,7 +350,7 @@ static int ray_probe(struct pcmcia_device *p_dev)
#endif /* WIRELESS_SPY */
- DEBUG(2, "ray_cs ray_attach calling ether_setup.)\n");
+ dev_dbg(&p_dev->dev, "ray_cs ray_attach calling ether_setup.)\n");
netif_stop_queue(dev);
init_timer(&local->timer);
@@ -393,7 +373,7 @@ static void ray_detach(struct pcmcia_device *link)
struct net_device *dev;
ray_dev_t *local;
- DEBUG(1, "ray_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "ray_detach\n");
this_device = NULL;
dev = link->priv;
@@ -408,7 +388,7 @@ static void ray_detach(struct pcmcia_device *link)
unregister_netdev(dev);
free_netdev(dev);
}
- DEBUG(2, "ray_cs ray_detach ending\n");
+ dev_dbg(&link->dev, "ray_cs ray_detach ending\n");
} /* ray_detach */
/*=============================================================================
@@ -416,19 +396,17 @@ static void ray_detach(struct pcmcia_device *link)
is received, to configure the PCMCIA socket, and to make the
ethernet device available to the system.
=============================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
#define MAX_TUPLE_SIZE 128
static int ray_config(struct pcmcia_device *link)
{
- int last_fn = 0, last_ret = 0;
+ int ret = 0;
int i;
win_req_t req;
memreq_t mem;
struct net_device *dev = (struct net_device *)link->priv;
ray_dev_t *local = netdev_priv(dev);
- DEBUG(1, "ray_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "ray_config\n");
/* Determine card type and firmware version */
printk(KERN_INFO "ray_cs Detected: %s%s%s%s\n",
@@ -440,14 +418,17 @@ static int ray_config(struct pcmcia_device *link)
/* Now allocate an interrupt line. Note that this does not
actually assign a handler to the interrupt.
*/
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
dev->irq = link->irq.AssignedIRQ;
/* This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/*** Set up 32k window for shared memory (transmit and control) ************/
req.Attributes =
@@ -455,10 +436,14 @@ static int ray_config(struct pcmcia_device *link)
req.Base = 0;
req.Size = 0x8000;
req.AccessSpeed = ray_mem_speed;
- CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
+ ret = pcmcia_request_window(link, &req, &link->win);
+ if (ret)
+ goto failed;
mem.CardOffset = 0x0000;
mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
+ ret = pcmcia_map_mem_page(link, link->win, &mem);
+ if (ret)
+ goto failed;
local->sram = ioremap(req.Base, req.Size);
/*** Set up 16k window for shared memory (receive buffer) ***************/
@@ -467,11 +452,14 @@ static int ray_config(struct pcmcia_device *link)
req.Base = 0;
req.Size = 0x4000;
req.AccessSpeed = ray_mem_speed;
- CS_CHECK(RequestWindow,
- pcmcia_request_window(&link, &req, &local->rmem_handle));
+ ret = pcmcia_request_window(link, &req, &local->rmem_handle);
+ if (ret)
+ goto failed;
mem.CardOffset = 0x8000;
mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(local->rmem_handle, &mem));
+ ret = pcmcia_map_mem_page(link, local->rmem_handle, &mem);
+ if (ret)
+ goto failed;
local->rmem = ioremap(req.Base, req.Size);
/*** Set up window for attribute memory ***********************************/
@@ -480,22 +468,25 @@ static int ray_config(struct pcmcia_device *link)
req.Base = 0;
req.Size = 0x1000;
req.AccessSpeed = ray_mem_speed;
- CS_CHECK(RequestWindow,
- pcmcia_request_window(&link, &req, &local->amem_handle));
+ ret = pcmcia_request_window(link, &req, &local->amem_handle);
+ if (ret)
+ goto failed;
mem.CardOffset = 0x0000;
mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(local->amem_handle, &mem));
+ ret = pcmcia_map_mem_page(link, local->amem_handle, &mem);
+ if (ret)
+ goto failed;
local->amem = ioremap(req.Base, req.Size);
- DEBUG(3, "ray_config sram=%p\n", local->sram);
- DEBUG(3, "ray_config rmem=%p\n", local->rmem);
- DEBUG(3, "ray_config amem=%p\n", local->amem);
+ dev_dbg(&link->dev, "ray_config sram=%p\n", local->sram);
+ dev_dbg(&link->dev, "ray_config rmem=%p\n", local->rmem);
+ dev_dbg(&link->dev, "ray_config amem=%p\n", local->amem);
if (ray_init(dev) < 0) {
ray_release(link);
return -ENODEV;
}
- SET_NETDEV_DEV(dev, &handle_to_dev(link));
+ SET_NETDEV_DEV(dev, &link->dev);
i = register_netdev(dev);
if (i != 0) {
printk("ray_config register_netdev() failed\n");
@@ -511,9 +502,7 @@ static int ray_config(struct pcmcia_device *link)
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
-
+failed:
ray_release(link);
return -ENODEV;
} /* ray_config */
@@ -543,9 +532,9 @@ static int ray_init(struct net_device *dev)
struct ccs __iomem *pccs;
ray_dev_t *local = netdev_priv(dev);
struct pcmcia_device *link = local->finder;
- DEBUG(1, "ray_init(0x%p)\n", dev);
+ dev_dbg(&link->dev, "ray_init(0x%p)\n", dev);
if (!(pcmcia_dev_present(link))) {
- DEBUG(0, "ray_init - device not present\n");
+ dev_dbg(&link->dev, "ray_init - device not present\n");
return -1;
}
@@ -567,13 +556,13 @@ static int ray_init(struct net_device *dev)
local->fw_ver = local->startup_res.firmware_version[0];
local->fw_bld = local->startup_res.firmware_version[1];
local->fw_var = local->startup_res.firmware_version[2];
- DEBUG(1, "ray_init firmware version %d.%d \n", local->fw_ver,
+ dev_dbg(&link->dev, "ray_init firmware version %d.%d \n", local->fw_ver,
local->fw_bld);
local->tib_length = 0x20;
if ((local->fw_ver == 5) && (local->fw_bld >= 30))
local->tib_length = local->startup_res.tib_length;
- DEBUG(2, "ray_init tib_length = 0x%02x\n", local->tib_length);
+ dev_dbg(&link->dev, "ray_init tib_length = 0x%02x\n", local->tib_length);
/* Initialize CCS's to buffer free state */
pccs = ccs_base(local);
for (i = 0; i < NUMBER_OF_CCS; i++) {
@@ -592,7 +581,7 @@ static int ray_init(struct net_device *dev)
clear_interrupt(local); /* Clear any interrupt from the card */
local->card_status = CARD_AWAITING_PARAM;
- DEBUG(2, "ray_init ending\n");
+ dev_dbg(&link->dev, "ray_init ending\n");
return 0;
} /* ray_init */
@@ -605,9 +594,9 @@ static int dl_startup_params(struct net_device *dev)
struct ccs __iomem *pccs;
struct pcmcia_device *link = local->finder;
- DEBUG(1, "dl_startup_params entered\n");
+ dev_dbg(&link->dev, "dl_startup_params entered\n");
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs dl_startup_params - device not present\n");
+ dev_dbg(&link->dev, "ray_cs dl_startup_params - device not present\n");
return -1;
}
@@ -625,7 +614,7 @@ static int dl_startup_params(struct net_device *dev)
local->dl_param_ccs = ccsindex;
pccs = ccs_base(local) + ccsindex;
writeb(CCS_DOWNLOAD_STARTUP_PARAMS, &pccs->cmd);
- DEBUG(2, "dl_startup_params start ccsindex = %d\n",
+ dev_dbg(&link->dev, "dl_startup_params start ccsindex = %d\n",
local->dl_param_ccs);
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
@@ -641,7 +630,7 @@ static int dl_startup_params(struct net_device *dev)
local->timer.data = (long)local;
local->timer.function = &verify_dl_startup;
add_timer(&local->timer);
- DEBUG(2,
+ dev_dbg(&link->dev,
"ray_cs dl_startup_params started timer for verify_dl_startup\n");
return 0;
} /* dl_startup_params */
@@ -717,11 +706,11 @@ static void verify_dl_startup(u_long data)
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs verify_dl_startup - device not present\n");
+ dev_dbg(&link->dev, "ray_cs verify_dl_startup - device not present\n");
return;
}
-#ifdef PCMCIA_DEBUG
- if (pc_debug > 2) {
+#if 0
+ {
int i;
printk(KERN_DEBUG
"verify_dl_startup parameters sent via ccs %d:\n",
@@ -760,7 +749,7 @@ static void start_net(u_long data)
int ccsindex;
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs start_net - device not present\n");
+ dev_dbg(&link->dev, "ray_cs start_net - device not present\n");
return;
}
/* Fill in the CCS fields for the ECF */
@@ -771,7 +760,7 @@ static void start_net(u_long data)
writeb(0, &pccs->var.start_network.update_param);
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(1, "ray start net failed - card not ready for intr\n");
+ dev_dbg(&link->dev, "ray start net failed - card not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
return;
}
@@ -790,7 +779,7 @@ static void join_net(u_long data)
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs join_net - device not present\n");
+ dev_dbg(&link->dev, "ray_cs join_net - device not present\n");
return;
}
/* Fill in the CCS fields for the ECF */
@@ -802,7 +791,7 @@ static void join_net(u_long data)
writeb(0, &pccs->var.join_network.net_initiated);
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(1, "ray join net failed - card not ready for intr\n");
+ dev_dbg(&link->dev, "ray join net failed - card not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
return;
}
@@ -821,7 +810,7 @@ static void ray_release(struct pcmcia_device *link)
ray_dev_t *local = netdev_priv(dev);
int i;
- DEBUG(1, "ray_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "ray_release\n");
del_timer(&local->timer);
@@ -829,15 +818,15 @@ static void ray_release(struct pcmcia_device *link)
iounmap(local->rmem);
iounmap(local->amem);
/* Do bother checking to see if these succeed or not */
- i = pcmcia_release_window(local->amem_handle);
+ i = pcmcia_release_window(link, local->amem_handle);
if (i != 0)
- DEBUG(0, "ReleaseWindow(local->amem) ret = %x\n", i);
- i = pcmcia_release_window(local->rmem_handle);
+ dev_dbg(&link->dev, "ReleaseWindow(local->amem) ret = %x\n", i);
+ i = pcmcia_release_window(link, local->rmem_handle);
if (i != 0)
- DEBUG(0, "ReleaseWindow(local->rmem) ret = %x\n", i);
+ dev_dbg(&link->dev, "ReleaseWindow(local->rmem) ret = %x\n", i);
pcmcia_disable_device(link);
- DEBUG(2, "ray_release ending\n");
+ dev_dbg(&link->dev, "ray_release ending\n");
}
static int ray_suspend(struct pcmcia_device *link)
@@ -871,9 +860,9 @@ static int ray_dev_init(struct net_device *dev)
ray_dev_t *local = netdev_priv(dev);
struct pcmcia_device *link = local->finder;
- DEBUG(1, "ray_dev_init(dev=%p)\n", dev);
+ dev_dbg(&link->dev, "ray_dev_init(dev=%p)\n", dev);
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_dev_init - device not present\n");
+ dev_dbg(&link->dev, "ray_dev_init - device not present\n");
return -1;
}
#ifdef RAY_IMMEDIATE_INIT
@@ -887,7 +876,7 @@ static int ray_dev_init(struct net_device *dev)
/* Postpone the card init so that we can still configure the card,
* for example using the Wireless Extensions. The init will happen
* in ray_open() - Jean II */
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_dev_init: postponing card init to ray_open() ; Status = %d\n",
local->card_status);
#endif /* RAY_IMMEDIATE_INIT */
@@ -896,7 +885,7 @@ static int ray_dev_init(struct net_device *dev)
memcpy(dev->dev_addr, &local->sparm.b4.a_mac_addr, ADDRLEN);
memset(dev->broadcast, 0xff, ETH_ALEN);
- DEBUG(2, "ray_dev_init ending\n");
+ dev_dbg(&link->dev, "ray_dev_init ending\n");
return 0;
}
@@ -906,9 +895,9 @@ static int ray_dev_config(struct net_device *dev, struct ifmap *map)
ray_dev_t *local = netdev_priv(dev);
struct pcmcia_device *link = local->finder;
/* Dummy routine to satisfy device structure */
- DEBUG(1, "ray_dev_config(dev=%p,ifmap=%p)\n", dev, map);
+ dev_dbg(&link->dev, "ray_dev_config(dev=%p,ifmap=%p)\n", dev, map);
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_dev_config - device not present\n");
+ dev_dbg(&link->dev, "ray_dev_config - device not present\n");
return -1;
}
@@ -924,14 +913,14 @@ static netdev_tx_t ray_dev_start_xmit(struct sk_buff *skb,
short length = skb->len;
if (!pcmcia_dev_present(link)) {
- DEBUG(2, "ray_dev_start_xmit - device not present\n");
+ dev_dbg(&link->dev, "ray_dev_start_xmit - device not present\n");
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
- DEBUG(3, "ray_dev_start_xmit(skb=%p, dev=%p)\n", skb, dev);
+ dev_dbg(&link->dev, "ray_dev_start_xmit(skb=%p, dev=%p)\n", skb, dev);
if (local->authentication_state == NEED_TO_AUTH) {
- DEBUG(0, "ray_cs Sending authentication request.\n");
+ dev_dbg(&link->dev, "ray_cs Sending authentication request.\n");
if (!build_auth_frame(local, local->auth_id, OPEN_AUTH_REQUEST)) {
local->authentication_state = AUTHENTICATED;
netif_stop_queue(dev);
@@ -971,7 +960,7 @@ static int ray_hw_xmit(unsigned char *data, int len, struct net_device *dev,
struct tx_msg __iomem *ptx; /* Address of xmit buffer in PC space */
short int addr; /* Address of xmit buffer in card space */
- DEBUG(3, "ray_hw_xmit(data=%p, len=%d, dev=%p)\n", data, len, dev);
+ pr_debug("ray_hw_xmit(data=%p, len=%d, dev=%p)\n", data, len, dev);
if (len + TX_HEADER_LENGTH > TX_BUF_SIZE) {
printk(KERN_INFO "ray_hw_xmit packet too large: %d bytes\n",
len);
@@ -979,9 +968,9 @@ static int ray_hw_xmit(unsigned char *data, int len, struct net_device *dev,
}
switch (ccsindex = get_free_tx_ccs(local)) {
case ECCSBUSY:
- DEBUG(2, "ray_hw_xmit tx_ccs table busy\n");
+ pr_debug("ray_hw_xmit tx_ccs table busy\n");
case ECCSFULL:
- DEBUG(2, "ray_hw_xmit No free tx ccs\n");
+ pr_debug("ray_hw_xmit No free tx ccs\n");
case ECARDGONE:
netif_stop_queue(dev);
return XMIT_NO_CCS;
@@ -1018,12 +1007,12 @@ static int ray_hw_xmit(unsigned char *data, int len, struct net_device *dev,
writeb(PSM_CAM, &pccs->var.tx_request.pow_sav_mode);
writeb(local->net_default_tx_rate, &pccs->var.tx_request.tx_rate);
writeb(0, &pccs->var.tx_request.antenna);
- DEBUG(3, "ray_hw_xmit default_tx_rate = 0x%x\n",
+ pr_debug("ray_hw_xmit default_tx_rate = 0x%x\n",
local->net_default_tx_rate);
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(2, "ray_hw_xmit failed - ECF not ready for intr\n");
+ pr_debug("ray_hw_xmit failed - ECF not ready for intr\n");
/* TBD very inefficient to copy packet to buffer, and then not
send it, but the alternative is to queue the messages and that
won't be done for a while. Maybe set tbusy until a CCS is free?
@@ -1040,7 +1029,7 @@ static int translate_frame(ray_dev_t *local, struct tx_msg __iomem *ptx,
{
__be16 proto = ((struct ethhdr *)data)->h_proto;
if (ntohs(proto) >= 1536) { /* DIX II ethernet frame */
- DEBUG(3, "ray_cs translate_frame DIX II\n");
+ pr_debug("ray_cs translate_frame DIX II\n");
/* Copy LLC header to card buffer */
memcpy_toio(&ptx->var, eth2_llc, sizeof(eth2_llc));
memcpy_toio(((void __iomem *)&ptx->var) + sizeof(eth2_llc),
@@ -1056,9 +1045,9 @@ static int translate_frame(ray_dev_t *local, struct tx_msg __iomem *ptx,
len - ETH_HLEN);
return (int)sizeof(struct snaphdr_t) - ETH_HLEN;
} else { /* already 802 type, and proto is length */
- DEBUG(3, "ray_cs translate_frame 802\n");
+ pr_debug("ray_cs translate_frame 802\n");
if (proto == htons(0xffff)) { /* evil netware IPX 802.3 without LLC */
- DEBUG(3, "ray_cs translate_frame evil IPX\n");
+ pr_debug("ray_cs translate_frame evil IPX\n");
memcpy_toio(&ptx->var, data + ETH_HLEN, len - ETH_HLEN);
return 0 - ETH_HLEN;
}
@@ -1603,7 +1592,7 @@ static int ray_open(struct net_device *dev)
struct pcmcia_device *link;
link = local->finder;
- DEBUG(1, "ray_open('%s')\n", dev->name);
+ dev_dbg(&link->dev, "ray_open('%s')\n", dev->name);
if (link->open == 0)
local->num_multi = 0;
@@ -1613,7 +1602,7 @@ static int ray_open(struct net_device *dev)
if (local->card_status == CARD_AWAITING_PARAM) {
int i;
- DEBUG(1, "ray_open: doing init now !\n");
+ dev_dbg(&link->dev, "ray_open: doing init now !\n");
/* Download startup parameters */
if ((i = dl_startup_params(dev)) < 0) {
@@ -1629,7 +1618,7 @@ static int ray_open(struct net_device *dev)
else
netif_start_queue(dev);
- DEBUG(2, "ray_open ending\n");
+ dev_dbg(&link->dev, "ray_open ending\n");
return 0;
} /* end ray_open */
@@ -1640,7 +1629,7 @@ static int ray_dev_close(struct net_device *dev)
struct pcmcia_device *link;
link = local->finder;
- DEBUG(1, "ray_dev_close('%s')\n", dev->name);
+ dev_dbg(&link->dev, "ray_dev_close('%s')\n", dev->name);
link->open--;
netif_stop_queue(dev);
@@ -1656,7 +1645,7 @@ static int ray_dev_close(struct net_device *dev)
/*===========================================================================*/
static void ray_reset(struct net_device *dev)
{
- DEBUG(1, "ray_reset entered\n");
+ pr_debug("ray_reset entered\n");
return;
}
@@ -1669,17 +1658,17 @@ static int interrupt_ecf(ray_dev_t *local, int ccs)
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs interrupt_ecf - device not present\n");
+ dev_dbg(&link->dev, "ray_cs interrupt_ecf - device not present\n");
return -1;
}
- DEBUG(2, "interrupt_ecf(local=%p, ccs = 0x%x\n", local, ccs);
+ dev_dbg(&link->dev, "interrupt_ecf(local=%p, ccs = 0x%x\n", local, ccs);
while (i &&
(readb(local->amem + CIS_OFFSET + ECF_INTR_OFFSET) &
ECF_INTR_SET))
i--;
if (i == 0) {
- DEBUG(2, "ray_cs interrupt_ecf card not ready for interrupt\n");
+ dev_dbg(&link->dev, "ray_cs interrupt_ecf card not ready for interrupt\n");
return -1;
}
/* Fill the mailbox, then kick the card */
@@ -1698,12 +1687,12 @@ static int get_free_tx_ccs(ray_dev_t *local)
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs get_free_tx_ccs - device not present\n");
+ dev_dbg(&link->dev, "ray_cs get_free_tx_ccs - device not present\n");
return ECARDGONE;
}
if (test_and_set_bit(0, &local->tx_ccs_lock)) {
- DEBUG(1, "ray_cs tx_ccs_lock busy\n");
+ dev_dbg(&link->dev, "ray_cs tx_ccs_lock busy\n");
return ECCSBUSY;
}
@@ -1716,7 +1705,7 @@ static int get_free_tx_ccs(ray_dev_t *local)
}
}
local->tx_ccs_lock = 0;
- DEBUG(2, "ray_cs ERROR no free tx CCS for raylink card\n");
+ dev_dbg(&link->dev, "ray_cs ERROR no free tx CCS for raylink card\n");
return ECCSFULL;
} /* get_free_tx_ccs */
@@ -1730,11 +1719,11 @@ static int get_free_ccs(ray_dev_t *local)
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs get_free_ccs - device not present\n");
+ dev_dbg(&link->dev, "ray_cs get_free_ccs - device not present\n");
return ECARDGONE;
}
if (test_and_set_bit(0, &local->ccs_lock)) {
- DEBUG(1, "ray_cs ccs_lock busy\n");
+ dev_dbg(&link->dev, "ray_cs ccs_lock busy\n");
return ECCSBUSY;
}
@@ -1747,7 +1736,7 @@ static int get_free_ccs(ray_dev_t *local)
}
}
local->ccs_lock = 0;
- DEBUG(1, "ray_cs ERROR no free CCS for raylink card\n");
+ dev_dbg(&link->dev, "ray_cs ERROR no free CCS for raylink card\n");
return ECCSFULL;
} /* get_free_ccs */
@@ -1823,7 +1812,7 @@ static struct net_device_stats *ray_get_stats(struct net_device *dev)
struct pcmcia_device *link = local->finder;
struct status __iomem *p = local->sram + STATUS_BASE;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs net_device_stats - device not present\n");
+ dev_dbg(&link->dev, "ray_cs net_device_stats - device not present\n");
return &local->stats;
}
if (readb(&p->mrx_overflow_for_host)) {
@@ -1856,12 +1845,12 @@ static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value,
struct ccs __iomem *pccs;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_update_parm - device not present\n");
+ dev_dbg(&link->dev, "ray_update_parm - device not present\n");
return;
}
if ((ccsindex = get_free_ccs(local)) < 0) {
- DEBUG(0, "ray_update_parm - No free ccs\n");
+ dev_dbg(&link->dev, "ray_update_parm - No free ccs\n");
return;
}
pccs = ccs_base(local) + ccsindex;
@@ -1874,7 +1863,7 @@ static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value,
}
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(0, "ray_cs associate failed - ECF not ready for intr\n");
+ dev_dbg(&link->dev, "ray_cs associate failed - ECF not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
}
}
@@ -1891,12 +1880,12 @@ static void ray_update_multi_list(struct net_device *dev, int all)
void __iomem *p = local->sram + HOST_TO_ECF_BASE;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_update_multi_list - device not present\n");
+ dev_dbg(&link->dev, "ray_update_multi_list - device not present\n");
return;
} else
- DEBUG(2, "ray_update_multi_list(%p)\n", dev);
+ dev_dbg(&link->dev, "ray_update_multi_list(%p)\n", dev);
if ((ccsindex = get_free_ccs(local)) < 0) {
- DEBUG(1, "ray_update_multi - No free ccs\n");
+ dev_dbg(&link->dev, "ray_update_multi - No free ccs\n");
return;
}
pccs = ccs_base(local) + ccsindex;
@@ -1910,7 +1899,7 @@ static void ray_update_multi_list(struct net_device *dev, int all)
for (dmip = &dev->mc_list; (dmi = *dmip) != NULL;
dmip = &dmi->next) {
memcpy_toio(p, dmi->dmi_addr, ETH_ALEN);
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_update_multi add addr %02x%02x%02x%02x%02x%02x\n",
dmi->dmi_addr[0], dmi->dmi_addr[1],
dmi->dmi_addr[2], dmi->dmi_addr[3],
@@ -1921,12 +1910,12 @@ static void ray_update_multi_list(struct net_device *dev, int all)
if (i > 256 / ADDRLEN)
i = 256 / ADDRLEN;
writeb((UCHAR) i, &pccs->var);
- DEBUG(1, "ray_cs update_multi %d addresses in list\n", i);
+ dev_dbg(&link->dev, "ray_cs update_multi %d addresses in list\n", i);
/* Interrupt the firmware to process the command */
local->num_multi = i;
}
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs update_multi failed - ECF not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
}
@@ -1938,11 +1927,11 @@ static void set_multicast_list(struct net_device *dev)
ray_dev_t *local = netdev_priv(dev);
UCHAR promisc;
- DEBUG(2, "ray_cs set_multicast_list(%p)\n", dev);
+ pr_debug("ray_cs set_multicast_list(%p)\n", dev);
if (dev->flags & IFF_PROMISC) {
if (local->sparm.b5.a_promiscuous_mode == 0) {
- DEBUG(1, "ray_cs set_multicast_list promisc on\n");
+ pr_debug("ray_cs set_multicast_list promisc on\n");
local->sparm.b5.a_promiscuous_mode = 1;
promisc = 1;
ray_update_parm(dev, OBJID_promiscuous_mode,
@@ -1950,7 +1939,7 @@ static void set_multicast_list(struct net_device *dev)
}
} else {
if (local->sparm.b5.a_promiscuous_mode == 1) {
- DEBUG(1, "ray_cs set_multicast_list promisc off\n");
+ pr_debug("ray_cs set_multicast_list promisc off\n");
local->sparm.b5.a_promiscuous_mode = 0;
promisc = 0;
ray_update_parm(dev, OBJID_promiscuous_mode,
@@ -1984,19 +1973,19 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
if (dev == NULL) /* Note that we want interrupts with dev->start == 0 */
return IRQ_NONE;
- DEBUG(4, "ray_cs: interrupt for *dev=%p\n", dev);
+ pr_debug("ray_cs: interrupt for *dev=%p\n", dev);
local = netdev_priv(dev);
link = (struct pcmcia_device *)local->finder;
if (!pcmcia_dev_present(link)) {
- DEBUG(2,
- "ray_cs interrupt from device not present or suspended.\n");
+ pr_debug(
+ "ray_cs interrupt from device not present or suspended.\n");
return IRQ_NONE;
}
rcsindex = readb(&((struct scb __iomem *)(local->sram))->rcs_index);
if (rcsindex >= (NUMBER_OF_CCS + NUMBER_OF_RCS)) {
- DEBUG(1, "ray_cs interrupt bad rcsindex = 0x%x\n", rcsindex);
+ dev_dbg(&link->dev, "ray_cs interrupt bad rcsindex = 0x%x\n", rcsindex);
clear_interrupt(local);
return IRQ_HANDLED;
}
@@ -2008,33 +1997,33 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
case CCS_DOWNLOAD_STARTUP_PARAMS: /* Happens in firmware someday */
del_timer(&local->timer);
if (status == CCS_COMMAND_COMPLETE) {
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt download_startup_parameters OK\n");
} else {
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt download_startup_parameters fail\n");
}
break;
case CCS_UPDATE_PARAMS:
- DEBUG(1, "ray_cs interrupt update params done\n");
+ dev_dbg(&link->dev, "ray_cs interrupt update params done\n");
if (status != CCS_COMMAND_COMPLETE) {
tmp =
readb(&pccs->var.update_param.
failure_cause);
- DEBUG(0,
+ dev_dbg(&link->dev,
"ray_cs interrupt update params failed - reason %d\n",
tmp);
}
break;
case CCS_REPORT_PARAMS:
- DEBUG(1, "ray_cs interrupt report params done\n");
+ dev_dbg(&link->dev, "ray_cs interrupt report params done\n");
break;
case CCS_UPDATE_MULTICAST_LIST: /* Note that this CCS isn't returned */
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt CCS Update Multicast List done\n");
break;
case CCS_UPDATE_POWER_SAVINGS_MODE:
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt update power save mode done\n");
break;
case CCS_START_NETWORK:
@@ -2043,11 +2032,11 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
if (readb
(&pccs->var.start_network.net_initiated) ==
1) {
- DEBUG(0,
+ dev_dbg(&link->dev,
"ray_cs interrupt network \"%s\" started\n",
local->sparm.b4.a_current_ess_id);
} else {
- DEBUG(0,
+ dev_dbg(&link->dev,
"ray_cs interrupt network \"%s\" joined\n",
local->sparm.b4.a_current_ess_id);
}
@@ -2075,12 +2064,12 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
local->timer.expires = jiffies + HZ * 5;
local->timer.data = (long)local;
if (status == CCS_START_NETWORK) {
- DEBUG(0,
+ dev_dbg(&link->dev,
"ray_cs interrupt network \"%s\" start failed\n",
local->sparm.b4.a_current_ess_id);
local->timer.function = &start_net;
} else {
- DEBUG(0,
+ dev_dbg(&link->dev,
"ray_cs interrupt network \"%s\" join failed\n",
local->sparm.b4.a_current_ess_id);
local->timer.function = &join_net;
@@ -2091,19 +2080,19 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
case CCS_START_ASSOCIATION:
if (status == CCS_COMMAND_COMPLETE) {
local->card_status = CARD_ASSOC_COMPLETE;
- DEBUG(0, "ray_cs association successful\n");
+ dev_dbg(&link->dev, "ray_cs association successful\n");
} else {
- DEBUG(0, "ray_cs association failed,\n");
+ dev_dbg(&link->dev, "ray_cs association failed,\n");
local->card_status = CARD_ASSOC_FAILED;
join_net((u_long) local);
}
break;
case CCS_TX_REQUEST:
if (status == CCS_COMMAND_COMPLETE) {
- DEBUG(3,
+ dev_dbg(&link->dev,
"ray_cs interrupt tx request complete\n");
} else {
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt tx request failed\n");
}
if (!sniffer)
@@ -2111,21 +2100,21 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
netif_wake_queue(dev);
break;
case CCS_TEST_MEMORY:
- DEBUG(1, "ray_cs interrupt mem test done\n");
+ dev_dbg(&link->dev, "ray_cs interrupt mem test done\n");
break;
case CCS_SHUTDOWN:
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt Unexpected CCS returned - Shutdown\n");
break;
case CCS_DUMP_MEMORY:
- DEBUG(1, "ray_cs interrupt dump memory done\n");
+ dev_dbg(&link->dev, "ray_cs interrupt dump memory done\n");
break;
case CCS_START_TIMER:
- DEBUG(2,
+ dev_dbg(&link->dev,
"ray_cs interrupt DING - raylink timer expired\n");
break;
default:
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt Unexpected CCS 0x%x returned 0x%x\n",
rcsindex, cmd);
}
@@ -2139,7 +2128,7 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
ray_rx(dev, local, prcs);
break;
case REJOIN_NET_COMPLETE:
- DEBUG(1, "ray_cs interrupt rejoin net complete\n");
+ dev_dbg(&link->dev, "ray_cs interrupt rejoin net complete\n");
local->card_status = CARD_ACQ_COMPLETE;
/* do we need to clear tx buffers CCS's? */
if (local->sparm.b4.a_network_type == ADHOC) {
@@ -2149,7 +2138,7 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
memcpy_fromio(&local->bss_id,
prcs->var.rejoin_net_complete.
bssid, ADDRLEN);
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs new BSSID = %02x%02x%02x%02x%02x%02x\n",
local->bss_id[0], local->bss_id[1],
local->bss_id[2], local->bss_id[3],
@@ -2159,15 +2148,15 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
}
break;
case ROAMING_INITIATED:
- DEBUG(1, "ray_cs interrupt roaming initiated\n");
+ dev_dbg(&link->dev, "ray_cs interrupt roaming initiated\n");
netif_stop_queue(dev);
local->card_status = CARD_DOING_ACQ;
break;
case JAPAN_CALL_SIGN_RXD:
- DEBUG(1, "ray_cs interrupt japan call sign rx\n");
+ dev_dbg(&link->dev, "ray_cs interrupt japan call sign rx\n");
break;
default:
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs Unexpected interrupt for RCS 0x%x cmd = 0x%x\n",
rcsindex,
(unsigned int)readb(&prcs->interrupt_id));
@@ -2186,7 +2175,7 @@ static void ray_rx(struct net_device *dev, ray_dev_t *local,
int rx_len;
unsigned int pkt_addr;
void __iomem *pmsg;
- DEBUG(4, "ray_rx process rx packet\n");
+ pr_debug("ray_rx process rx packet\n");
/* Calculate address of packet within Rx buffer */
pkt_addr = ((readb(&prcs->var.rx_packet.rx_data_ptr[0]) << 8)
@@ -2199,28 +2188,28 @@ static void ray_rx(struct net_device *dev, ray_dev_t *local,
pmsg = local->rmem + pkt_addr;
switch (readb(pmsg)) {
case DATA_TYPE:
- DEBUG(4, "ray_rx data type\n");
+ pr_debug("ray_rx data type\n");
rx_data(dev, prcs, pkt_addr, rx_len);
break;
case AUTHENTIC_TYPE:
- DEBUG(4, "ray_rx authentic type\n");
+ pr_debug("ray_rx authentic type\n");
if (sniffer)
rx_data(dev, prcs, pkt_addr, rx_len);
else
rx_authenticate(local, prcs, pkt_addr, rx_len);
break;
case DEAUTHENTIC_TYPE:
- DEBUG(4, "ray_rx deauth type\n");
+ pr_debug("ray_rx deauth type\n");
if (sniffer)
rx_data(dev, prcs, pkt_addr, rx_len);
else
rx_deauthenticate(local, prcs, pkt_addr, rx_len);
break;
case NULL_MSG_TYPE:
- DEBUG(3, "ray_cs rx NULL msg\n");
+ pr_debug("ray_cs rx NULL msg\n");
break;
case BEACON_TYPE:
- DEBUG(4, "ray_rx beacon type\n");
+ pr_debug("ray_rx beacon type\n");
if (sniffer)
rx_data(dev, prcs, pkt_addr, rx_len);
@@ -2233,7 +2222,7 @@ static void ray_rx(struct net_device *dev, ray_dev_t *local,
ray_get_stats(dev);
break;
default:
- DEBUG(0, "ray_cs unknown pkt type %2x\n",
+ pr_debug("ray_cs unknown pkt type %2x\n",
(unsigned int)readb(pmsg));
break;
}
@@ -2262,7 +2251,7 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
rx_len >
(dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
FCS_LEN)) {
- DEBUG(0,
+ pr_debug(
"ray_cs invalid packet length %d received \n",
rx_len);
return;
@@ -2273,17 +2262,17 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
rx_len >
(dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
FCS_LEN)) {
- DEBUG(0,
+ pr_debug(
"ray_cs invalid packet length %d received \n",
rx_len);
return;
}
}
}
- DEBUG(4, "ray_cs rx_data packet\n");
+ pr_debug("ray_cs rx_data packet\n");
/* If fragmented packet, verify sizes of fragments add up */
if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) {
- DEBUG(1, "ray_cs rx'ed fragment\n");
+ pr_debug("ray_cs rx'ed fragment\n");
tmp = (readb(&prcs->var.rx_packet.totalpacketlength[0]) << 8)
+ readb(&prcs->var.rx_packet.totalpacketlength[1]);
total_len = tmp;
@@ -2301,7 +2290,7 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
} while (1);
if (tmp < 0) {
- DEBUG(0,
+ pr_debug(
"ray_cs rx_data fragment lengths don't add up\n");
local->stats.rx_dropped++;
release_frag_chain(local, prcs);
@@ -2313,7 +2302,7 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
skb = dev_alloc_skb(total_len + 5);
if (skb == NULL) {
- DEBUG(0, "ray_cs rx_data could not allocate skb\n");
+ pr_debug("ray_cs rx_data could not allocate skb\n");
local->stats.rx_dropped++;
if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF)
release_frag_chain(local, prcs);
@@ -2321,7 +2310,7 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
}
skb_reserve(skb, 2); /* Align IP on 16 byte (TBD check this) */
- DEBUG(4, "ray_cs rx_data total_len = %x, rx_len = %x\n", total_len,
+ pr_debug("ray_cs rx_data total_len = %x, rx_len = %x\n", total_len,
rx_len);
/************************/
@@ -2354,7 +2343,7 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
tmp = 17;
if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) {
prcslink = prcs;
- DEBUG(1, "ray_cs rx_data in fragment loop\n");
+ pr_debug("ray_cs rx_data in fragment loop\n");
do {
prcslink = rcs_base(local)
+
@@ -2426,8 +2415,8 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
memcpy(destaddr, ieee80211_get_DA(pmac), ADDRLEN);
memcpy(srcaddr, ieee80211_get_SA(pmac), ADDRLEN);
-#ifdef PCMCIA_DEBUG
- if (pc_debug > 3) {
+#if 0
+ if {
print_hex_dump(KERN_DEBUG, "skb->data before untranslate: ",
DUMP_PREFIX_NONE, 16, 1,
skb->data, 64, true);
@@ -2441,7 +2430,7 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
if (psnap->dsap != 0xaa || psnap->ssap != 0xaa || psnap->ctrl != 3) {
/* not a snap type so leave it alone */
- DEBUG(3, "ray_cs untranslate NOT SNAP %02x %02x %02x\n",
+ pr_debug("ray_cs untranslate NOT SNAP %02x %02x %02x\n",
psnap->dsap, psnap->ssap, psnap->ctrl);
delta = RX_MAC_HEADER_LENGTH - ETH_HLEN;
@@ -2450,7 +2439,7 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
} else { /* Its a SNAP */
if (memcmp(psnap->org, org_bridge, 3) == 0) {
/* EtherII and nuke the LLC */
- DEBUG(3, "ray_cs untranslate Bridge encap\n");
+ pr_debug("ray_cs untranslate Bridge encap\n");
delta = RX_MAC_HEADER_LENGTH
+ sizeof(struct snaphdr_t) - ETH_HLEN;
peth = (struct ethhdr *)(skb->data + delta);
@@ -2459,14 +2448,14 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
switch (ntohs(type)) {
case ETH_P_IPX:
case ETH_P_AARP:
- DEBUG(3, "ray_cs untranslate RFC IPX/AARP\n");
+ pr_debug("ray_cs untranslate RFC IPX/AARP\n");
delta = RX_MAC_HEADER_LENGTH - ETH_HLEN;
peth = (struct ethhdr *)(skb->data + delta);
peth->h_proto =
htons(len - RX_MAC_HEADER_LENGTH);
break;
default:
- DEBUG(3, "ray_cs untranslate RFC default\n");
+ pr_debug("ray_cs untranslate RFC default\n");
delta = RX_MAC_HEADER_LENGTH +
sizeof(struct snaphdr_t) - ETH_HLEN;
peth = (struct ethhdr *)(skb->data + delta);
@@ -2482,12 +2471,12 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
}
/* TBD reserve skb_reserve(skb, delta); */
skb_pull(skb, delta);
- DEBUG(3, "untranslate after skb_pull(%d), skb->data = %p\n", delta,
+ pr_debug("untranslate after skb_pull(%d), skb->data = %p\n", delta,
skb->data);
memcpy(peth->h_dest, destaddr, ADDRLEN);
memcpy(peth->h_source, srcaddr, ADDRLEN);
-#ifdef PCMCIA_DEBUG
- if (pc_debug > 3) {
+#if 0
+ {
int i;
printk(KERN_DEBUG "skb->data after untranslate:");
for (i = 0; i < 64; i++)
@@ -2529,7 +2518,7 @@ static void release_frag_chain(ray_dev_t *local, struct rcs __iomem *prcs)
while (tmp--) {
writeb(CCS_BUFFER_FREE, &prcslink->buffer_status);
if (rcsindex >= (NUMBER_OF_CCS + NUMBER_OF_RCS)) {
- DEBUG(1, "ray_cs interrupt bad rcsindex = 0x%x\n",
+ pr_debug("ray_cs interrupt bad rcsindex = 0x%x\n",
rcsindex);
break;
}
@@ -2543,9 +2532,9 @@ static void release_frag_chain(ray_dev_t *local, struct rcs __iomem *prcs)
static void authenticate(ray_dev_t *local)
{
struct pcmcia_device *link = local->finder;
- DEBUG(0, "ray_cs Starting authentication.\n");
+ dev_dbg(&link->dev, "ray_cs Starting authentication.\n");
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs authenticate - device not present\n");
+ dev_dbg(&link->dev, "ray_cs authenticate - device not present\n");
return;
}
@@ -2573,11 +2562,11 @@ static void rx_authenticate(ray_dev_t *local, struct rcs __iomem *prcs,
copy_from_rx_buff(local, buff, pkt_addr, rx_len & 0xff);
/* if we are trying to get authenticated */
if (local->sparm.b4.a_network_type == ADHOC) {
- DEBUG(1, "ray_cs rx_auth var= %02x %02x %02x %02x %02x %02x\n",
+ pr_debug("ray_cs rx_auth var= %02x %02x %02x %02x %02x %02x\n",
msg->var[0], msg->var[1], msg->var[2], msg->var[3],
msg->var[4], msg->var[5]);
if (msg->var[2] == 1) {
- DEBUG(0, "ray_cs Sending authentication response.\n");
+ pr_debug("ray_cs Sending authentication response.\n");
if (!build_auth_frame
(local, msg->mac.addr_2, OPEN_AUTH_RESPONSE)) {
local->authentication_state = NEED_TO_AUTH;
@@ -2591,13 +2580,13 @@ static void rx_authenticate(ray_dev_t *local, struct rcs __iomem *prcs,
/* Verify authentication sequence #2 and success */
if (msg->var[2] == 2) {
if ((msg->var[3] | msg->var[4]) == 0) {
- DEBUG(1, "Authentication successful\n");
+ pr_debug("Authentication successful\n");
local->card_status = CARD_AUTH_COMPLETE;
associate(local);
local->authentication_state =
AUTHENTICATED;
} else {
- DEBUG(0, "Authentication refused\n");
+ pr_debug("Authentication refused\n");
local->card_status = CARD_AUTH_REFUSED;
join_net((u_long) local);
local->authentication_state =
@@ -2617,22 +2606,22 @@ static void associate(ray_dev_t *local)
struct net_device *dev = link->priv;
int ccsindex;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs associate - device not present\n");
+ dev_dbg(&link->dev, "ray_cs associate - device not present\n");
return;
}
/* If no tx buffers available, return */
if ((ccsindex = get_free_ccs(local)) < 0) {
/* TBD should never be here but... what if we are? */
- DEBUG(1, "ray_cs associate - No free ccs\n");
+ dev_dbg(&link->dev, "ray_cs associate - No free ccs\n");
return;
}
- DEBUG(1, "ray_cs Starting association with access point\n");
+ dev_dbg(&link->dev, "ray_cs Starting association with access point\n");
pccs = ccs_base(local) + ccsindex;
/* fill in the CCS */
writeb(CCS_START_ASSOCIATION, &pccs->cmd);
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(1, "ray_cs associate failed - ECF not ready for intr\n");
+ dev_dbg(&link->dev, "ray_cs associate failed - ECF not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
del_timer(&local->timer);
@@ -2655,7 +2644,7 @@ static void rx_deauthenticate(ray_dev_t *local, struct rcs __iomem *prcs,
/* UCHAR buff[256];
struct rx_msg *msg = (struct rx_msg *)buff;
*/
- DEBUG(0, "Deauthentication frame received\n");
+ pr_debug("Deauthentication frame received\n");
local->authentication_state = UNAUTHENTICATED;
/* Need to reauthenticate or rejoin depending on reason code */
/* copy_from_rx_buff(local, buff, pkt_addr, rx_len & 0xff);
@@ -2823,7 +2812,7 @@ static int build_auth_frame(ray_dev_t *local, UCHAR *dest, int auth_type)
/* If no tx buffers available, return */
if ((ccsindex = get_free_tx_ccs(local)) < 0) {
- DEBUG(1, "ray_cs send authenticate - No free tx ccs\n");
+ pr_debug("ray_cs send authenticate - No free tx ccs\n");
return -1;
}
@@ -2855,7 +2844,7 @@ static int build_auth_frame(ray_dev_t *local, UCHAR *dest, int auth_type)
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(1,
+ pr_debug(
"ray_cs send authentication request failed - ECF not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
return -1;
@@ -2942,9 +2931,9 @@ static int __init init_ray_cs(void)
{
int rc;
- DEBUG(1, "%s\n", rcsid);
+ pr_debug("%s\n", rcsid);
rc = pcmcia_register_driver(&ray_driver);
- DEBUG(1, "raylink init_module register_pcmcia_driver returns 0x%x\n",
+ pr_debug("raylink init_module register_pcmcia_driver returns 0x%x\n",
rc);
#ifdef CONFIG_PROC_FS
@@ -2964,7 +2953,7 @@ static int __init init_ray_cs(void)
static void __exit exit_ray_cs(void)
{
- DEBUG(0, "ray_cs: cleanup_module\n");
+ pr_debug("ray_cs: cleanup_module\n");
#ifdef CONFIG_PROC_FS
remove_proc_entry("driver/ray_cs/ray_cs", NULL);
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 431a20ec6db6..33918fd5b231 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -3656,10 +3656,7 @@ wv_pcmcia_reset(struct net_device * dev)
i = pcmcia_access_configuration_register(link, &reg);
if (i != 0)
- {
- cs_error(link, AccessConfigurationRegister, i);
return FALSE;
- }
#ifdef DEBUG_CONFIG_INFO
printk(KERN_DEBUG "%s: wavelan_pcmcia_reset(): Config reg is 0x%x\n",
@@ -3670,19 +3667,13 @@ wv_pcmcia_reset(struct net_device * dev)
reg.Value = reg.Value | COR_SW_RESET;
i = pcmcia_access_configuration_register(link, &reg);
if (i != 0)
- {
- cs_error(link, AccessConfigurationRegister, i);
return FALSE;
- }
reg.Action = CS_WRITE;
reg.Value = COR_LEVEL_IRQ | COR_CONFIG;
i = pcmcia_access_configuration_register(link, &reg);
if (i != 0)
- {
- cs_error(link, AccessConfigurationRegister, i);
return FALSE;
- }
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: <-wv_pcmcia_reset()\n", dev->name);
@@ -3857,10 +3848,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
{
i = pcmcia_request_io(link, &link->io);
if (i != 0)
- {
- cs_error(link, RequestIO, i);
break;
- }
/*
* Now allocate an interrupt line. Note that this does not
@@ -3868,10 +3856,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
*/
i = pcmcia_request_irq(link, &link->irq);
if (i != 0)
- {
- cs_error(link, RequestIRQ, i);
break;
- }
/*
* This actually configures the PCMCIA socket -- setting up
@@ -3880,10 +3865,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
link->conf.ConfigIndex = 1;
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
- {
- cs_error(link, RequestConfiguration, i);
break;
- }
/*
* Allocate a small memory window. Note that the struct pcmcia_device
@@ -3894,24 +3876,18 @@ wv_pcmcia_config(struct pcmcia_device * link)
req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
req.Base = req.Size = 0;
req.AccessSpeed = mem_speed;
- i = pcmcia_request_window(&link, &req, &link->win);
+ i = pcmcia_request_window(link, &req, &link->win);
if (i != 0)
- {
- cs_error(link, RequestWindow, i);
break;
- }
lp->mem = ioremap(req.Base, req.Size);
dev->mem_start = (u_long)lp->mem;
dev->mem_end = dev->mem_start + req.Size;
mem.CardOffset = 0; mem.Page = 0;
- i = pcmcia_map_mem_page(link->win, &mem);
+ i = pcmcia_map_mem_page(link, link->win, &mem);
if (i != 0)
- {
- cs_error(link, MapMemPage, i);
break;
- }
/* Feed device with this info... */
dev->irq = link->irq.AssignedIRQ;
@@ -3923,7 +3899,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
lp->mem, dev->irq, (u_int) dev->base_addr);
#endif
- SET_NETDEV_DEV(dev, &handle_to_dev(link));
+ SET_NETDEV_DEV(dev, &link->dev);
i = register_netdev(dev);
if(i != 0)
{
@@ -4462,8 +4438,7 @@ wavelan_probe(struct pcmcia_device *p_dev)
p_dev->io.IOAddrLines = 3;
/* Interrupt setup */
- p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
- p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
p_dev->irq.Handler = wavelan_interrupt;
/* General socket configuration */
@@ -4475,7 +4450,7 @@ wavelan_probe(struct pcmcia_device *p_dev)
if (!dev)
return -ENOMEM;
- p_dev->priv = p_dev->irq.Instance = dev;
+ p_dev->priv = dev;
lp = netdev_priv(dev);
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 4f1e0cfe609b..5f0401a52cff 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -67,23 +67,7 @@
/* For rough constant delay */
#define WL3501_NOPLOOP(n) { int x = 0; while (x++ < n) slow_down_io(); }
-/*
- * All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If you do not
- * define PCMCIA_DEBUG at all, all the debug code will be left out. If you
- * compile with PCMCIA_DEBUG=0, the debug code will be present but disabled --
- * but it can then be enabled for specific modules at load time with a
- * 'pc_debug=#' option to insmod.
- */
-#define PCMCIA_DEBUG 0
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define dprintk(n, format, args...) \
- { if (pc_debug > (n)) \
- printk(KERN_INFO "%s: " format "\n", __func__ , ##args); }
-#else
-#define dprintk(n, format, args...)
-#endif
+
#define wl3501_outb(a, b) { outb(a, b); slow_down_io(); }
#define wl3501_outb_p(a, b) { outb_p(a, b); slow_down_io(); }
@@ -684,10 +668,10 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
int matchflag = 0;
struct wl3501_scan_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS) {
- dprintk(3, "success");
+ pr_debug("success");
if ((this->net_type == IW_MODE_INFRA &&
(sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
(this->net_type == IW_MODE_ADHOC &&
@@ -722,7 +706,7 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
}
}
} else if (sig.status == WL3501_STATUS_TIMEOUT) {
- dprintk(3, "timeout");
+ pr_debug("timeout");
this->join_sta_bss = 0;
for (i = this->join_sta_bss; i < this->bss_cnt; i++)
if (!wl3501_mgmt_join(this, i))
@@ -879,7 +863,7 @@ static int wl3501_mgmt_auth(struct wl3501_card *this)
.timeout = 1000,
};
- dprintk(3, "entry");
+ pr_debug("entry");
memcpy(sig.mac_addr, this->bssid, ETH_ALEN);
return wl3501_esbq_exec(this, &sig, sizeof(sig));
}
@@ -893,7 +877,7 @@ static int wl3501_mgmt_association(struct wl3501_card *this)
.cap_info = this->cap_info,
};
- dprintk(3, "entry");
+ pr_debug("entry");
memcpy(sig.mac_addr, this->bssid, ETH_ALEN);
return wl3501_esbq_exec(this, &sig, sizeof(sig));
}
@@ -903,7 +887,7 @@ static void wl3501_mgmt_join_confirm(struct net_device *dev, u16 addr)
struct wl3501_card *this = netdev_priv(dev);
struct wl3501_join_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS) {
if (this->net_type == IW_MODE_INFRA) {
@@ -962,7 +946,7 @@ static inline void wl3501_md_confirm_interrupt(struct net_device *dev,
{
struct wl3501_md_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
wl3501_free_tx_buffer(this, sig.data);
if (netif_queue_stopped(dev))
@@ -1017,7 +1001,7 @@ static inline void wl3501_md_ind_interrupt(struct net_device *dev,
static inline void wl3501_get_confirm_interrupt(struct wl3501_card *this,
u16 addr, void *sig, int size)
{
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &this->sig_get_confirm,
sizeof(this->sig_get_confirm));
wake_up(&this->wait);
@@ -1029,7 +1013,7 @@ static inline void wl3501_start_confirm_interrupt(struct net_device *dev,
{
struct wl3501_start_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS)
netif_wake_queue(dev);
@@ -1041,7 +1025,7 @@ static inline void wl3501_assoc_confirm_interrupt(struct net_device *dev,
struct wl3501_card *this = netdev_priv(dev);
struct wl3501_assoc_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS)
@@ -1053,7 +1037,7 @@ static inline void wl3501_auth_confirm_interrupt(struct wl3501_card *this,
{
struct wl3501_auth_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS)
@@ -1069,7 +1053,7 @@ static inline void wl3501_rx_interrupt(struct net_device *dev)
u8 sig_id;
struct wl3501_card *this = netdev_priv(dev);
- dprintk(3, "entry");
+ pr_debug("entry");
loop:
morepkts = 0;
if (!wl3501_esbq_confirm(this))
@@ -1302,7 +1286,7 @@ static int wl3501_reset(struct net_device *dev)
wl3501_ack_interrupt(this);
wl3501_unblock_interrupt(this);
wl3501_mgmt_scan(this, 100);
- dprintk(1, "%s: device reset", dev->name);
+ pr_debug("%s: device reset", dev->name);
rc = 0;
out:
return rc;
@@ -1376,7 +1360,7 @@ static int wl3501_open(struct net_device *dev)
link->open++;
/* Initial WL3501 firmware */
- dprintk(1, "%s: Initialize WL3501 firmware...", dev->name);
+ pr_debug("%s: Initialize WL3501 firmware...", dev->name);
if (wl3501_init_firmware(this))
goto fail;
/* Initial device variables */
@@ -1388,7 +1372,7 @@ static int wl3501_open(struct net_device *dev)
wl3501_unblock_interrupt(this);
wl3501_mgmt_scan(this, 100);
rc = 0;
- dprintk(1, "%s: WL3501 opened", dev->name);
+ pr_debug("%s: WL3501 opened", dev->name);
printk(KERN_INFO "%s: Card Name: %s\n"
"%s: Firmware Date: %s\n",
dev->name, this->card_name,
@@ -1914,8 +1898,7 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
p_dev->io.IOAddrLines = 5;
/* Interrupt setup */
- p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
- p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
p_dev->irq.Handler = wl3501_interrupt;
/* General socket configuration */
@@ -1938,16 +1921,13 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
dev->wireless_handlers = &wl3501_handler_def;
SET_ETHTOOL_OPS(dev, &ops);
netif_stop_queue(dev);
- p_dev->priv = p_dev->irq.Instance = dev;
+ p_dev->priv = dev;
return wl3501_config(p_dev);
out_link:
return -ENOMEM;
}
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
/**
* wl3501_config - configure the PCMCIA socket and make eth device available
* @link - FILL_IN
@@ -1959,7 +1939,7 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
static int wl3501_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- int i = 0, j, last_fn, last_ret;
+ int i = 0, j, ret;
struct wl3501_card *this;
/* Try allocating IO ports. This tries a few fixed addresses. If you
@@ -1975,24 +1955,26 @@ static int wl3501_config(struct pcmcia_device *link)
if (i == 0)
break;
}
- if (i != 0) {
- cs_error(link, RequestIO, i);
+ if (i != 0)
goto failed;
- }
/* Now allocate an interrupt line. Note that this does not actually
* assign a handler to the interrupt. */
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
/* This actually configures the PCMCIA socket -- setting up the I/O
* windows and the interrupt mapping. */
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
- SET_NETDEV_DEV(dev, &handle_to_dev(link));
+ SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev)) {
printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n");
goto failed;
@@ -2041,8 +2023,6 @@ static int wl3501_config(struct pcmcia_device *link)
netif_start_queue(dev);
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
wl3501_release(link);
return -ENODEV;
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.