diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000/e1000.h | 7 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000/e1000_hw.c | 216 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000/e1000_main.c | 133 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/hw.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 45 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 12 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_82575.c | 8 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_defines.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_i210.c | 27 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_i210.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_phy.c | 94 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_phy.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_regs.h | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/igb.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/igb_main.c | 22 |
15 files changed, 379 insertions, 195 deletions
diff --git a/drivers/net/ethernet/intel/e1000/e1000.h b/drivers/net/ethernet/intel/e1000/e1000.h index 69707108d23c..98fe5a2cd6e3 100644 --- a/drivers/net/ethernet/intel/e1000/e1000.h +++ b/drivers/net/ethernet/intel/e1000/e1000.h @@ -213,8 +213,11 @@ struct e1000_rx_ring { }; #define E1000_DESC_UNUSED(R) \ - ((((R)->next_to_clean > (R)->next_to_use) \ - ? 0 : (R)->count) + (R)->next_to_clean - (R)->next_to_use - 1) +({ \ + unsigned int clean = smp_load_acquire(&(R)->next_to_clean); \ + unsigned int use = READ_ONCE((R)->next_to_use); \ + (clean > use ? 0 : (R)->count) + clean - use - 1; \ +}) #define E1000_RX_DESC_EXT(R, i) \ (&(((union e1000_rx_desc_extended *)((R).desc))[i])) diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c index b1af0d613caa..8172cf08cc33 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_hw.c +++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c @@ -1,5 +1,5 @@ /******************************************************************************* - +* Intel PRO/1000 Linux driver Copyright(c) 1999 - 2006 Intel Corporation. @@ -106,7 +106,7 @@ u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = { 120, 120 }; -static DEFINE_SPINLOCK(e1000_eeprom_lock); +static DEFINE_MUTEX(e1000_eeprom_lock); static DEFINE_SPINLOCK(e1000_phy_lock); /** @@ -624,8 +624,8 @@ s32 e1000_init_hw(struct e1000_hw *hw) /* Workaround for PCI-X problem when BIOS sets MMRBC * incorrectly. */ - if (hw->bus_type == e1000_bus_type_pcix - && e1000_pcix_get_mmrbc(hw) > 2048) + if (hw->bus_type == e1000_bus_type_pcix && + e1000_pcix_get_mmrbc(hw) > 2048) e1000_pcix_set_mmrbc(hw, 2048); break; } @@ -683,10 +683,9 @@ static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw) } ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1, - &eeprom_data); - if (ret_val) { + &eeprom_data); + if (ret_val) return ret_val; - } if (eeprom_data != EEPROM_RESERVED_WORD) { /* Adjust SERDES output amplitude only. */ @@ -1074,8 +1073,8 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw) if (hw->mac_type <= e1000_82543 || hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 || - hw->mac_type == e1000_82541_rev_2 - || hw->mac_type == e1000_82547_rev_2) + hw->mac_type == e1000_82541_rev_2 || + hw->mac_type == e1000_82547_rev_2) hw->phy_reset_disable = false; return E1000_SUCCESS; @@ -1652,7 +1651,7 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) mii_1000t_ctrl_reg = 0; } else { ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, - mii_1000t_ctrl_reg); + mii_1000t_ctrl_reg); if (ret_val) return ret_val; } @@ -1881,10 +1880,11 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) if (ret_val) return ret_val; - if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) - && (!hw->autoneg) - && (hw->forced_speed_duplex == e1000_10_full - || hw->forced_speed_duplex == e1000_10_half)) { + if ((hw->mac_type == e1000_82544 || + hw->mac_type == e1000_82543) && + (!hw->autoneg) && + (hw->forced_speed_duplex == e1000_10_full || + hw->forced_speed_duplex == e1000_10_half)) { ret_val = e1000_polarity_reversal_workaround(hw); if (ret_val) return ret_val; @@ -2084,11 +2084,12 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) * so we had to force link. In this case, we need to force the * configuration of the MAC to match the "fc" parameter. */ - if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed)) - || ((hw->media_type == e1000_media_type_internal_serdes) - && (hw->autoneg_failed)) - || ((hw->media_type == e1000_media_type_copper) - && (!hw->autoneg))) { + if (((hw->media_type == e1000_media_type_fiber) && + (hw->autoneg_failed)) || + ((hw->media_type == e1000_media_type_internal_serdes) && + (hw->autoneg_failed)) || + ((hw->media_type == e1000_media_type_copper) && + (!hw->autoneg))) { ret_val = e1000_force_mac_fc(hw); if (ret_val) { e_dbg("Error forcing flow control settings\n"); @@ -2193,8 +2194,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) - { + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc = E1000_FC_TX_PAUSE; e_dbg ("Flow Control = TX PAUSE frames only.\n"); @@ -2210,8 +2210,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) - { + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc = E1000_FC_RX_PAUSE; e_dbg ("Flow Control = RX PAUSE frames only.\n"); @@ -2460,10 +2459,11 @@ s32 e1000_check_for_link(struct e1000_hw *hw) * happen due to the execution of this workaround. */ - if ((hw->mac_type == e1000_82544 - || hw->mac_type == e1000_82543) && (!hw->autoneg) - && (hw->forced_speed_duplex == e1000_10_full - || hw->forced_speed_duplex == e1000_10_half)) { + if ((hw->mac_type == e1000_82544 || + hw->mac_type == e1000_82543) && + (!hw->autoneg) && + (hw->forced_speed_duplex == e1000_10_full || + hw->forced_speed_duplex == e1000_10_half)) { ew32(IMC, 0xffffffff); ret_val = e1000_polarity_reversal_workaround(hw); @@ -2528,8 +2528,10 @@ s32 e1000_check_for_link(struct e1000_hw *hw) */ if (hw->tbi_compatibility_en) { u16 speed, duplex; + ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex); + if (ret_val) { e_dbg ("Error getting link speed and duplex\n"); @@ -2628,10 +2630,10 @@ s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data); if (ret_val) return ret_val; - if ((*speed == SPEED_100 - && !(phy_data & NWAY_LPAR_100TX_FD_CAPS)) - || (*speed == SPEED_10 - && !(phy_data & NWAY_LPAR_10T_FD_CAPS))) + if ((*speed == SPEED_100 && + !(phy_data & NWAY_LPAR_100TX_FD_CAPS)) || + (*speed == SPEED_10 && + !(phy_data & NWAY_LPAR_10T_FD_CAPS))) *duplex = HALF_DUPLEX; } } @@ -2664,9 +2666,9 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw) ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); if (ret_val) return ret_val; - if (phy_data & MII_SR_AUTONEG_COMPLETE) { + if (phy_data & MII_SR_AUTONEG_COMPLETE) return E1000_SUCCESS; - } + msleep(100); } return E1000_SUCCESS; @@ -2803,11 +2805,11 @@ static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw) return data; } - /** * e1000_read_phy_reg - read a phy register * @hw: Struct containing variables accessed by shared code * @reg_addr: address of the PHY register to read + * @phy_data: pointer to the value on the PHY register * * Reads the value from a PHY register, if the value is on a specific non zero * page, sets the page first. @@ -2823,14 +2825,13 @@ s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data) (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, (u16) reg_addr); - if (ret_val) { - spin_unlock_irqrestore(&e1000_phy_lock, flags); - return ret_val; - } + if (ret_val) + goto out; } ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr, phy_data); +out: spin_unlock_irqrestore(&e1000_phy_lock, flags); return ret_val; @@ -2881,7 +2882,7 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, e_dbg("MDI Read Error\n"); return -E1000_ERR_PHY; } - *phy_data = (u16) mdic; + *phy_data = (u16)mdic; } else { mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) | (phy_addr << E1000_MDIC_PHY_SHIFT) | @@ -2906,7 +2907,7 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, e_dbg("MDI Error\n"); return -E1000_ERR_PHY; } - *phy_data = (u16) mdic; + *phy_data = (u16)mdic; } } else { /* We must first send a preamble through the MDIO pin to signal @@ -2960,7 +2961,7 @@ s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data) if ((hw->phy_type == e1000_phy_igp) && (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, - (u16) reg_addr); + (u16)reg_addr); if (ret_val) { spin_unlock_irqrestore(&e1000_phy_lock, flags); return ret_val; @@ -2993,7 +2994,7 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, * the desired data. */ if (hw->mac_type == e1000_ce4100) { - mdic = (((u32) phy_data) | + mdic = (((u32)phy_data) | (reg_addr << E1000_MDIC_REG_SHIFT) | (phy_addr << E1000_MDIC_PHY_SHIFT) | (INTEL_CE_GBE_MDIC_OP_WRITE) | @@ -3015,7 +3016,7 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, return -E1000_ERR_PHY; } } else { - mdic = (((u32) phy_data) | + mdic = (((u32)phy_data) | (reg_addr << E1000_MDIC_REG_SHIFT) | (phy_addr << E1000_MDIC_PHY_SHIFT) | (E1000_MDIC_OP_WRITE)); @@ -3053,7 +3054,7 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) | (PHY_OP_WRITE << 12) | (PHY_SOF << 14)); mdic <<= 16; - mdic |= (u32) phy_data; + mdic |= (u32)phy_data; e1000_shift_out_mdi_bits(hw, mdic, 32); } @@ -3176,14 +3177,14 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw) if (ret_val) return ret_val; - hw->phy_id = (u32) (phy_id_high << 16); + hw->phy_id = (u32)(phy_id_high << 16); udelay(20); ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low); if (ret_val) return ret_val; - hw->phy_id |= (u32) (phy_id_low & PHY_REVISION_MASK); - hw->phy_revision = (u32) phy_id_low & ~PHY_REVISION_MASK; + hw->phy_id |= (u32)(phy_id_low & PHY_REVISION_MASK); + hw->phy_revision = (u32)phy_id_low & ~PHY_REVISION_MASK; switch (hw->mac_type) { case e1000_82543: @@ -3401,7 +3402,6 @@ static s32 e1000_phy_m88_get_info(struct e1000_hw *hw, phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >> SR_1000T_REMOTE_RX_STATUS_SHIFT) ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - } return E1000_SUCCESS; @@ -3449,7 +3449,7 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) if (hw->phy_type == e1000_phy_igp) return e1000_phy_igp_get_info(hw, phy_info); else if ((hw->phy_type == e1000_phy_8211) || - (hw->phy_type == e1000_phy_8201)) + (hw->phy_type == e1000_phy_8201)) return E1000_SUCCESS; else return e1000_phy_m88_get_info(hw, phy_info); @@ -3611,11 +3611,11 @@ static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count) */ mask = 0x01 << (count - 1); eecd = er32(EECD); - if (eeprom->type == e1000_eeprom_microwire) { + if (eeprom->type == e1000_eeprom_microwire) eecd &= ~E1000_EECD_DO; - } else if (eeprom->type == e1000_eeprom_spi) { + else if (eeprom->type == e1000_eeprom_spi) eecd |= E1000_EECD_DO; - } + do { /* A "1" is shifted out to the EEPROM by setting bit "DI" to a * "1", and then raising and then lowering the clock (the SK bit @@ -3851,7 +3851,7 @@ static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw) do { e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI, hw->eeprom.opcode_bits); - spi_stat_reg = (u8) e1000_shift_in_ee_bits(hw, 8); + spi_stat_reg = (u8)e1000_shift_in_ee_bits(hw, 8); if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI)) break; @@ -3882,9 +3882,10 @@ static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw) s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { s32 ret; - spin_lock(&e1000_eeprom_lock); + + mutex_lock(&e1000_eeprom_lock); ret = e1000_do_read_eeprom(hw, offset, words, data); - spin_unlock(&e1000_eeprom_lock); + mutex_unlock(&e1000_eeprom_lock); return ret; } @@ -3896,15 +3897,16 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, if (hw->mac_type == e1000_ce4100) { GBE_CONFIG_FLASH_READ(GBE_CONFIG_BASE_VIRT, offset, words, - data); + data); return E1000_SUCCESS; } /* A check for invalid values: offset too large, too many words, and * not enough words. */ - if ((offset >= eeprom->word_size) - || (words > eeprom->word_size - offset) || (words == 0)) { + if ((offset >= eeprom->word_size) || + (words > eeprom->word_size - offset) || + (words == 0)) { e_dbg("\"words\" parameter out of bounds. Words = %d," "size = %d\n", offset, eeprom->word_size); return -E1000_ERR_EEPROM; @@ -3940,7 +3942,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, /* Send the READ command (opcode + addr) */ e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits); - e1000_shift_out_ee_bits(hw, (u16) (offset * 2), + e1000_shift_out_ee_bits(hw, (u16)(offset * 2), eeprom->address_bits); /* Read the data. The address of the eeprom internally @@ -3960,7 +3962,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, e1000_shift_out_ee_bits(hw, EEPROM_READ_OPCODE_MICROWIRE, eeprom->opcode_bits); - e1000_shift_out_ee_bits(hw, (u16) (offset + i), + e1000_shift_out_ee_bits(hw, (u16)(offset + i), eeprom->address_bits); /* Read the data. For microwire, each word requires the @@ -3968,6 +3970,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, */ data[i] = e1000_shift_in_ee_bits(hw, 16); e1000_standby_eeprom(hw); + cond_resched(); } } @@ -4004,7 +4007,7 @@ s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw) return E1000_SUCCESS; #endif - if (checksum == (u16) EEPROM_SUM) + if (checksum == (u16)EEPROM_SUM) return E1000_SUCCESS; else { e_dbg("EEPROM Checksum Invalid\n"); @@ -4031,7 +4034,7 @@ s32 e1000_update_eeprom_checksum(struct e1000_hw *hw) } checksum += eeprom_data; } - checksum = (u16) EEPROM_SUM - checksum; + checksum = (u16)EEPROM_SUM - checksum; if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) { e_dbg("EEPROM Write Error\n"); return -E1000_ERR_EEPROM; @@ -4052,9 +4055,10 @@ s32 e1000_update_eeprom_checksum(struct e1000_hw *hw) s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { s32 ret; - spin_lock(&e1000_eeprom_lock); + + mutex_lock(&e1000_eeprom_lock); ret = e1000_do_write_eeprom(hw, offset, words, data); - spin_unlock(&e1000_eeprom_lock); + mutex_unlock(&e1000_eeprom_lock); return ret; } @@ -4066,15 +4070,16 @@ static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, if (hw->mac_type == e1000_ce4100) { GBE_CONFIG_FLASH_WRITE(GBE_CONFIG_BASE_VIRT, offset, words, - data); + data); return E1000_SUCCESS; } /* A check for invalid values: offset too large, too many words, and * not enough words. */ - if ((offset >= eeprom->word_size) - || (words > eeprom->word_size - offset) || (words == 0)) { + if ((offset >= eeprom->word_size) || + (words > eeprom->word_size - offset) || + (words == 0)) { e_dbg("\"words\" parameter out of bounds\n"); return -E1000_ERR_EEPROM; } @@ -4116,6 +4121,7 @@ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words, return -E1000_ERR_EEPROM; e1000_standby_eeprom(hw); + cond_resched(); /* Send the WRITE ENABLE command (8 bit opcode ) */ e1000_shift_out_ee_bits(hw, EEPROM_WREN_OPCODE_SPI, @@ -4132,7 +4138,7 @@ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words, /* Send the Write command (8-bit opcode + addr) */ e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits); - e1000_shift_out_ee_bits(hw, (u16) ((offset + widx) * 2), + e1000_shift_out_ee_bits(hw, (u16)((offset + widx) * 2), eeprom->address_bits); /* Send the data */ @@ -4142,6 +4148,7 @@ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words, */ while (widx < words) { u16 word_out = data[widx]; + word_out = (word_out >> 8) | (word_out << 8); e1000_shift_out_ee_bits(hw, word_out, 16); widx++; @@ -4183,9 +4190,9 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset, * EEPROM into write/erase mode. */ e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE, - (u16) (eeprom->opcode_bits + 2)); + (u16)(eeprom->opcode_bits + 2)); - e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2)); + e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2)); /* Prepare the EEPROM */ e1000_standby_eeprom(hw); @@ -4195,7 +4202,7 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset, e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE, eeprom->opcode_bits); - e1000_shift_out_ee_bits(hw, (u16) (offset + words_written), + e1000_shift_out_ee_bits(hw, (u16)(offset + words_written), eeprom->address_bits); /* Send the data */ @@ -4224,6 +4231,7 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset, /* Recover from write */ e1000_standby_eeprom(hw); + cond_resched(); words_written++; } @@ -4235,9 +4243,9 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset, * EEPROM out of write/erase mode. */ e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE, - (u16) (eeprom->opcode_bits + 2)); + (u16)(eeprom->opcode_bits + 2)); - e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2)); + e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2)); return E1000_SUCCESS; } @@ -4260,8 +4268,8 @@ s32 e1000_read_mac_addr(struct e1000_hw *hw) e_dbg("EEPROM Read Error\n"); return -E1000_ERR_EEPROM; } - hw->perm_mac_addr[i] = (u8) (eeprom_data & 0x00FF); - hw->perm_mac_addr[i + 1] = (u8) (eeprom_data >> 8); + hw->perm_mac_addr[i] = (u8)(eeprom_data & 0x00FF); + hw->perm_mac_addr[i + 1] = (u8)(eeprom_data >> 8); } switch (hw->mac_type) { @@ -4328,19 +4336,19 @@ u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) */ case 0: /* [47:36] i.e. 0x563 for above example address */ - hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4)); + hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4)); break; case 1: /* [46:35] i.e. 0xAC6 for above example address */ - hash_value = ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5)); + hash_value = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5)); break; case 2: /* [45:34] i.e. 0x5D8 for above example address */ - hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6)); + hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6)); break; case 3: /* [43:32] i.e. 0x634 for above example address */ - hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8)); + hash_value = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8)); break; } @@ -4361,9 +4369,9 @@ void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) /* HW expects these in little endian so we reverse the byte order * from network order (big endian) to little endian */ - rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) | - ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); - rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); + rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) | + ((u32)addr[2] << 16) | ((u32)addr[3] << 24)); + rar_high = ((u32)addr[4] | ((u32)addr[5] << 8)); /* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx * unit hang. @@ -4537,7 +4545,7 @@ s32 e1000_setup_led(struct e1000_hw *hw) if (ret_val) return ret_val; ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, - (u16) (hw->phy_spd_default & + (u16)(hw->phy_spd_default & ~IGP01E1000_GMII_SPD)); if (ret_val) return ret_val; @@ -4802,7 +4810,7 @@ void e1000_reset_adaptive(struct e1000_hw *hw) void e1000_update_adaptive(struct e1000_hw *hw) { if (hw->adaptive_ifs) { - if ((hw->collision_delta *hw->ifs_ratio) > hw->tx_packet_delta) { + if ((hw->collision_delta * hw->ifs_ratio) > hw->tx_packet_delta) { if (hw->tx_packet_delta > MIN_NUM_XMITS) { hw->in_ifs_mode = true; if (hw->current_ifs_val < hw->ifs_max_val) { @@ -4816,8 +4824,8 @@ void e1000_update_adaptive(struct e1000_hw *hw) } } } else { - if (hw->in_ifs_mode - && (hw->tx_packet_delta <= MIN_NUM_XMITS)) { + if (hw->in_ifs_mode && + (hw->tx_packet_delta <= MIN_NUM_XMITS)) { hw->current_ifs_val = 0; hw->in_ifs_mode = false; ew32(AIT, 0); @@ -4922,7 +4930,6 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, /* Use old method for Phy older than IGP */ if (hw->phy_type == e1000_phy_m88) { - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); if (ret_val) @@ -4966,7 +4973,6 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, }; /* Read the AGC registers for all channels */ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { - ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data); if (ret_val) @@ -4976,8 +4982,8 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, /* Value bound check. */ if ((cur_agc_value >= - IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) - || (cur_agc_value == 0)) + IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) || + (cur_agc_value == 0)) return -E1000_ERR_PHY; agc_value += cur_agc_value; @@ -5054,7 +5060,6 @@ static s32 e1000_check_polarity(struct e1000_hw *hw, */ if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == IGP01E1000_PSSR_SPEED_1000MBPS) { - /* Read the GIG initialization PCS register (0x00B4) */ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG, @@ -5175,8 +5180,8 @@ static s32 e1000_1000Mb_check_cable_length(struct e1000_hw *hw) hw->ffe_config_state = e1000_ffe_config_active; ret_val = e1000_write_phy_reg(hw, - IGP01E1000_PHY_DSP_FFE, - IGP01E1000_PHY_DSP_FFE_CM_CP); + IGP01E1000_PHY_DSP_FFE, + IGP01E1000_PHY_DSP_FFE_CM_CP); if (ret_val) return ret_val; break; @@ -5243,7 +5248,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) msleep(20); ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_FORCE_GIGA); + IGP01E1000_IEEE_FORCE_GIGA); if (ret_val) return ret_val; for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { @@ -5264,7 +5269,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) } ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_RESTART_AUTONEG); + IGP01E1000_IEEE_RESTART_AUTONEG); if (ret_val) return ret_val; @@ -5299,7 +5304,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) msleep(20); ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_FORCE_GIGA); + IGP01E1000_IEEE_FORCE_GIGA); if (ret_val) return ret_val; ret_val = @@ -5309,7 +5314,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) return ret_val; ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_RESTART_AUTONEG); + IGP01E1000_IEEE_RESTART_AUTONEG); if (ret_val) return ret_val; @@ -5346,9 +5351,8 @@ static s32 e1000_set_phy_mode(struct e1000_hw *hw) ret_val = e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1, &eeprom_data); - if (ret_val) { + if (ret_val) return ret_val; - } if ((eeprom_data != EEPROM_RESERVED_WORD) && (eeprom_data & EEPROM_PHY_CLASS_A)) { @@ -5395,8 +5399,8 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) * from the lowest speeds starting from 10Mbps. The capability is used * for Dx transitions and states */ - if (hw->mac_type == e1000_82541_rev_2 - || hw->mac_type == e1000_82547_rev_2) { + if (hw->mac_type == e1000_82541_rev_2 || + hw->mac_type == e1000_82547_rev_2) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data); if (ret_val) @@ -5446,11 +5450,9 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) if (ret_val) return ret_val; } - } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT) - || (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL) - || (hw->autoneg_advertised == - AUTONEG_ADVERTISE_10_100_ALL)) { - + } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT) || + (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL) || + (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) { if (hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) { phy_data |= IGP01E1000_GMII_FLEX_SPD; @@ -5474,7 +5476,6 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) phy_data); if (ret_val) return ret_val; - } return E1000_SUCCESS; } @@ -5542,7 +5543,6 @@ static s32 e1000_set_vco_speed(struct e1000_hw *hw) return E1000_SUCCESS; } - /** * e1000_enable_mng_pass_thru - check for bmc pass through * @hw: Struct containing variables accessed by shared code diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index fd7be860c201..3fc7bde699ba 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -99,13 +99,13 @@ int e1000_setup_all_rx_resources(struct e1000_adapter *adapter); void e1000_free_all_tx_resources(struct e1000_adapter *adapter); void e1000_free_all_rx_resources(struct e1000_adapter *adapter); static int e1000_setup_tx_resources(struct e1000_adapter *adapter, - struct e1000_tx_ring *txdr); + struct e1000_tx_ring *txdr); static int e1000_setup_rx_resources(struct e1000_adapter *adapter, - struct e1000_rx_ring *rxdr); + struct e1000_rx_ring *rxdr); static void e1000_free_tx_resources(struct e1000_adapter *adapter, - struct e1000_tx_ring *tx_ring); + struct e1000_tx_ring *tx_ring); static void e1000_free_rx_resources(struct e1000_adapter *adapter, - struct e1000_rx_ring *rx_ring); + struct e1000_rx_ring *rx_ring); void e1000_update_stats(struct e1000_adapter *adapter); static int e1000_init_module(void); @@ -122,16 +122,16 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter); static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter); static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter); static void e1000_clean_tx_ring(struct e1000_adapter *adapter, - struct e1000_tx_ring *tx_ring); + struct e1000_tx_ring *tx_ring); static void e1000_clean_rx_ring(struct e1000_adapter *adapter, - struct e1000_rx_ring *rx_ring); + struct e1000_rx_ring *rx_ring); static void e1000_set_rx_mode(struct net_device *netdev); static void e1000_update_phy_info_task(struct work_struct *work); static void e1000_watchdog(struct work_struct *work); static void e1000_82547_tx_fifo_stall_task(struct work_struct *work); static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev); -static struct net_device_stats * e1000_get_stats(struct net_device *netdev); +static struct net_device_stats *e1000_get_stats(struct net_device *netdev); static int e1000_change_mtu(struct net_device *netdev, int new_mtu); static int e1000_set_mac(struct net_device *netdev, void *p); static irqreturn_t e1000_intr(int irq, void *data); @@ -164,7 +164,7 @@ static void e1000_tx_timeout(struct net_device *dev); static void e1000_reset_task(struct work_struct *work); static void e1000_smartspeed(struct e1000_adapter *adapter); static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter, - struct sk_buff *skb); + struct sk_buff *skb); static bool e1000_vlan_used(struct e1000_adapter *adapter); static void e1000_vlan_mode(struct net_device *netdev, @@ -195,7 +195,7 @@ MODULE_PARM_DESC(copybreak, "Maximum size of packet that is copied to a new buffer on receive"); static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, - pci_channel_state_t state); + pci_channel_state_t state); static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev); static void e1000_io_resume(struct pci_dev *pdev); @@ -287,7 +287,7 @@ static int e1000_request_irq(struct e1000_adapter *adapter) int err; err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name, - netdev); + netdev); if (err) { e_err(probe, "Unable to allocate interrupt Error: %d\n", err); } @@ -636,8 +636,8 @@ void e1000_reset(struct e1000_adapter *adapter) * but don't include ethernet FCS because hardware appends it */ min_tx_space = (hw->max_frame_size + - sizeof(struct e1000_tx_desc) - - ETH_FCS_LEN) * 2; + sizeof(struct e1000_tx_desc) - + ETH_FCS_LEN) * 2; min_tx_space = ALIGN(min_tx_space, 1024); min_tx_space >>= 10; /* software strips receive CRC, so leave room for it */ @@ -943,8 +943,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) struct e1000_adapter *adapter; struct e1000_hw *hw; - static int cards_found = 0; - static int global_quad_port_a = 0; /* global ksp3 port a indication */ + static int cards_found; + static int global_quad_port_a; /* global ksp3 port a indication */ int i, err, pci_using_dac; u16 eeprom_data = 0; u16 tmp = 0; @@ -1046,7 +1046,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (hw->mac_type == e1000_ce4100) { hw->ce4100_gbe_mdio_base_virt = ioremap(pci_resource_start(pdev, BAR_1), - pci_resource_len(pdev, BAR_1)); + pci_resource_len(pdev, BAR_1)); if (!hw->ce4100_gbe_mdio_base_virt) goto err_mdio_ioremap; @@ -1148,7 +1148,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) break; case e1000_82546: case e1000_82546_rev_3: - if (er32(STATUS) & E1000_STATUS_FUNC_1){ + if (er32(STATUS) & E1000_STATUS_FUNC_1) { e1000_read_eeprom(hw, EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); break; @@ -1199,13 +1199,13 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) for (i = 0; i < 32; i++) { hw->phy_addr = i; e1000_read_phy_reg(hw, PHY_ID2, &tmp); - if (tmp == 0 || tmp == 0xFF) { - if (i == 31) - goto err_eeprom; - continue; - } else + + if (tmp != 0 && tmp != 0xFF) break; } + + if (i >= 32) + goto err_eeprom; } /* reset the hardware with the new settings */ @@ -1263,7 +1263,7 @@ err_pci_reg: * @pdev: PCI device information struct * * e1000_remove is called by the PCI subsystem to alert the driver - * that it should release a PCI device. The could be caused by a + * that it should release a PCI device. That could be caused by a * Hot-Plug event, or because the driver is going to be removed from * memory. **/ @@ -1334,12 +1334,12 @@ static int e1000_sw_init(struct e1000_adapter *adapter) static int e1000_alloc_queues(struct e1000_adapter *adapter) { adapter->tx_ring = kcalloc(adapter->num_tx_queues, - sizeof(struct e1000_tx_ring), GFP_KERNEL); + sizeof(struct e1000_tx_ring), GFP_KERNEL); if (!adapter->tx_ring) return -ENOMEM; adapter->rx_ring = kcalloc(adapter->num_rx_queues, - sizeof(struct e1000_rx_ring), GFP_KERNEL); + sizeof(struct e1000_rx_ring), GFP_KERNEL); if (!adapter->rx_ring) { kfree(adapter->tx_ring); return -ENOMEM; @@ -1811,20 +1811,20 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) rctl &= ~E1000_RCTL_SZ_4096; rctl |= E1000_RCTL_BSEX; switch (adapter->rx_buffer_len) { - case E1000_RXBUFFER_2048: - default: - rctl |= E1000_RCTL_SZ_2048; - rctl &= ~E1000_RCTL_BSEX; - break; - case E1000_RXBUFFER_4096: - rctl |= E1000_RCTL_SZ_4096; - break; - case E1000_RXBUFFER_8192: - rctl |= E1000_RCTL_SZ_8192; - break; - case E1000_RXBUFFER_16384: - rctl |= E1000_RCTL_SZ_16384; - break; + case E1000_RXBUFFER_2048: + default: + rctl |= E1000_RCTL_SZ_2048; + rctl &= ~E1000_RCTL_BSEX; + break; + case E1000_RXBUFFER_4096: + rctl |= E1000_RCTL_SZ_4096; + break; + case E1000_RXBUFFER_8192: + rctl |= E1000_RCTL_SZ_8192; + break; + case E1000_RXBUFFER_16384: + rctl |= E1000_RCTL_SZ_16384; + break; } /* This is useful for sniffing bad packets. */ @@ -1861,12 +1861,12 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) if (adapter->netdev->mtu > ETH_DATA_LEN) { rdlen = adapter->rx_ring[0].count * - sizeof(struct e1000_rx_desc); + sizeof(struct e1000_rx_desc); adapter->clean_rx = e1000_clean_jumbo_rx_irq; adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers; } else { rdlen = adapter->rx_ring[0].count * - sizeof(struct e1000_rx_desc); + sizeof(struct e1000_rx_desc); adapter->clean_rx = e1000_clean_rx_irq; adapter->alloc_rx_buf = e1000_alloc_rx_buffers; } @@ -2761,7 +2761,9 @@ static int e1000_tso(struct e1000_adapter *adapter, buffer_info->time_stamp = jiffies; buffer_info->next_to_watch = i; - if (++i == tx_ring->count) i = 0; + if (++i == tx_ring->count) + i = 0; + tx_ring->next_to_use = i; return true; @@ -2816,7 +2818,9 @@ static bool e1000_tx_csum(struct e1000_adapter *adapter, buffer_info->time_stamp = jiffies; buffer_info->next_to_watch = i; - if (unlikely(++i == tx_ring->count)) i = 0; + if (unlikely(++i == tx_ring->count)) + i = 0; + tx_ring->next_to_use = i; return true; @@ -2865,8 +2869,8 @@ static int e1000_tx_map(struct e1000_adapter *adapter, * packet is smaller than 2048 - 16 - 16 (or 2016) bytes */ if (unlikely((hw->bus_type == e1000_bus_type_pcix) && - (size > 2015) && count == 0)) - size = 2015; + (size > 2015) && count == 0)) + size = 2015; /* Workaround for potential 82544 hang in PCI-X. Avoid * terminating buffers within evenly-aligned dwords. @@ -2963,7 +2967,7 @@ dma_error: count--; while (count--) { - if (i==0) + if (i == 0) i += tx_ring->count; i--; buffer_info = &tx_ring->buffer_info[i]; @@ -3013,7 +3017,8 @@ static void e1000_tx_queue(struct e1000_adapter *adapter, tx_desc->lower.data = cpu_to_le32(txd_lower | buffer_info->length); tx_desc->upper.data = cpu_to_le32(txd_upper); - if (unlikely(++i == tx_ring->count)) i = 0; + if (unlikely(++i == tx_ring->count)) + i = 0; } tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd); @@ -3101,7 +3106,7 @@ static int e1000_maybe_stop_tx(struct net_device *netdev, return __e1000_maybe_stop_tx(netdev, size); } -#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 ) +#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1) static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) { @@ -3841,7 +3846,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, struct e1000_tx_buffer *buffer_info; unsigned int i, eop; unsigned int count = 0; - unsigned int total_tx_bytes=0, total_tx_packets=0; + unsigned int total_tx_bytes = 0, total_tx_packets = 0; unsigned int bytes_compl = 0, pkts_compl = 0; i = tx_ring->next_to_clean; @@ -3869,14 +3874,18 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, e1000_unmap_and_free_tx_resource(adapter, buffer_info); tx_desc->upper.data = 0; - if (unlikely(++i == tx_ring->count)) i = 0; + if (unlikely(++i == tx_ring->count)) + i = 0; } eop = tx_ring->buffer_info[i].next_to_watch; eop_desc = E1000_TX_DESC(*tx_ring, eop); } - tx_ring->next_to_clean = i; + /* Synchronize with E1000_DESC_UNUSED called from e1000_xmit_frame, + * which will reuse the cleaned buffers. + */ + smp_store_release(&tx_ring->next_to_clean, i); netdev_completed_queue(netdev, pkts_compl, bytes_compl); @@ -3954,9 +3963,11 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, skb_checksum_none_assert(skb); /* 82543 or newer only */ - if (unlikely(hw->mac_type < e1000_82543)) return; + if (unlikely(hw->mac_type < e1000_82543)) + return; /* Ignore Checksum bit is set */ - if (unlikely(status & E1000_RXD_STAT_IXSM)) return; + if (unlikely(status & E1000_RXD_STAT_IXSM)) + return; /* TCP/UDP checksum error bit is set */ if (unlikely(errors & E1000_RXD_ERR_TCPE)) { /* let the stack verify checksum errors */ @@ -4136,7 +4147,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, unsigned int i; int cleaned_count = 0; bool cleaned = false; - unsigned int total_rx_bytes=0, total_rx_packets=0; + unsigned int total_rx_bytes = 0, total_rx_packets = 0; i = rx_ring->next_to_clean; rx_desc = E1000_RX_DESC(*rx_ring, i); @@ -4153,7 +4164,9 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, status = rx_desc->status; - if (++i == rx_ring->count) i = 0; + if (++i == rx_ring->count) + i = 0; + next_rxd = E1000_RX_DESC(*rx_ring, i); prefetch(next_rxd); @@ -4356,7 +4369,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, unsigned int i; int cleaned_count = 0; bool cleaned = false; - unsigned int total_rx_bytes=0, total_rx_packets=0; + unsigned int total_rx_bytes = 0, total_rx_packets = 0; i = rx_ring->next_to_clean; rx_desc = E1000_RX_DESC(*rx_ring, i); @@ -4395,7 +4408,9 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, buffer_info->rxbuf.data = NULL; } - if (++i == rx_ring->count) i = 0; + if (++i == rx_ring->count) + i = 0; + next_rxd = E1000_RX_DESC(*rx_ring, i); prefetch(next_rxd); @@ -4683,9 +4698,11 @@ static void e1000_smartspeed(struct e1000_adapter *adapter) * we assume back-to-back */ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status); - if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return; + if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) + return; e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status); - if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return; + if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) + return; e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl); if (phy_ctrl & CR_1000T_MS_ENABLE) { phy_ctrl &= ~CR_1000T_MS_ENABLE; diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index c9da4654e9ca..b3949d5bef5c 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -91,6 +91,7 @@ struct e1000_hw; #define E1000_DEV_ID_PCH_SPT_I219_V 0x1570 /* SPT PCH */ #define E1000_DEV_ID_PCH_SPT_I219_LM2 0x15B7 /* SPT-H PCH */ #define E1000_DEV_ID_PCH_SPT_I219_V2 0x15B8 /* SPT-H PCH */ +#define E1000_DEV_ID_PCH_LBG_I219_LM3 0x15B9 /* LBG PCH */ #define E1000_REVISION_4 4 diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 91a5a0ae9cd7..a049e30639a1 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1984,7 +1984,7 @@ static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw) int i = 0; while ((blocked = !(er32(FWSM) & E1000_ICH_FWSM_RSPCIPHY)) && - (i++ < 10)) + (i++ < 30)) usleep_range(10000, 20000); return blocked ? E1000_BLK_PHY_RESET : 0; } @@ -3093,24 +3093,45 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank) struct e1000_nvm_info *nvm = &hw->nvm; u32 bank1_offset = nvm->flash_bank_size * sizeof(u16); u32 act_offset = E1000_ICH_NVM_SIG_WORD * 2 + 1; + u32 nvm_dword = 0; u8 sig_byte = 0; s32 ret_val; switch (hw->mac.type) { - /* In SPT, read from the CTRL_EXT reg instead of - * accessing the sector valid bits from the nvm - */ case e1000_pch_spt: - *bank = er32(CTRL_EXT) - & E1000_CTRL_EXT_NVMVS; - if ((*bank == 0) || (*bank == 1)) { - e_dbg("ERROR: No valid NVM bank present\n"); - return -E1000_ERR_NVM; - } else { - *bank = *bank - 2; + bank1_offset = nvm->flash_bank_size; + act_offset = E1000_ICH_NVM_SIG_WORD; + + /* set bank to 0 in case flash read fails */ + *bank = 0; + + /* Check bank 0 */ + ret_val = e1000_read_flash_dword_ich8lan(hw, act_offset, + &nvm_dword); + if (ret_val) + return ret_val; + sig_byte = (u8)((nvm_dword & 0xFF00) >> 8); + if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) == + E1000_ICH_NVM_SIG_VALUE) { + *bank = 0; return 0; } - break; + + /* Check bank 1 */ + ret_val = e1000_read_flash_dword_ich8lan(hw, act_offset + + bank1_offset, + &nvm_dword); + if (ret_val) + return ret_val; + sig_byte = (u8)((nvm_dword & 0xFF00) >> 8); + if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) == + E1000_ICH_NVM_SIG_VALUE) { + *bank = 1; + return 0; + } + + e_dbg("ERROR: No valid NVM bank present\n"); + return -E1000_ERR_NVM; case e1000_ich8lan: case e1000_ich9lan: eecd = er32(EECD); diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 0a854a47d31a..775e38910681 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1959,8 +1959,10 @@ static irqreturn_t e1000_intr_msix_rx(int __always_unused irq, void *data) * previous interrupt. */ if (rx_ring->set_itr) { - writel(1000000000 / (rx_ring->itr_val * 256), - rx_ring->itr_register); + u32 itr = rx_ring->itr_val ? + 1000000000 / (rx_ring->itr_val * 256) : 0; + + writel(itr, rx_ring->itr_register); rx_ring->set_itr = 0; } @@ -7465,6 +7467,7 @@ static const struct pci_device_id e1000_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_V), board_pch_spt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_LM2), board_pch_spt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_V2), board_pch_spt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LBG_I219_LM3), board_pch_spt }, { 0, 0, 0, 0, 0, 0, 0 } /* terminate list */ }; @@ -7504,14 +7507,11 @@ static struct pci_driver e1000_driver = { **/ static int __init e1000_init_module(void) { - int ret; - pr_info("Intel(R) PRO/1000 Network Driver - %s\n", e1000e_driver_version); pr_info("Copyright(c) 1999 - 2015 Intel Corporation.\n"); - ret = pci_register_driver(&e1000_driver); - return ret; + return pci_register_driver(&e1000_driver); } module_init(e1000_init_module); diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index 7a73510e547c..362911d024b5 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -272,6 +272,11 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw) if (ret_val) goto out; } + if (phy->id == M88E1543_E_PHY_ID) { + ret_val = igb_initialize_M88E1543_phy(hw); + if (ret_val) + goto out; + } break; case IGP03E1000_E_PHY_ID: phy->type = e1000_phy_igp_3; @@ -294,6 +299,7 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw) case I210_I_PHY_ID: phy->type = e1000_phy_i210; phy->ops.check_polarity = igb_check_polarity_m88; + phy->ops.get_cfg_done = igb_get_cfg_done_i210; phy->ops.get_phy_info = igb_get_phy_info_m88; phy->ops.get_cable_length = igb_get_cable_length_m88_gen2; phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580; @@ -925,6 +931,8 @@ static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw) if (phy->id == M88E1512_E_PHY_ID) ret_val = igb_initialize_M88E1512_phy(hw); + if (phy->id == M88E1543_E_PHY_ID) + ret_val = igb_initialize_M88E1543_phy(hw); out: return ret_val; } diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index b1915043bc0c..a61ee9462dd4 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -990,6 +990,7 @@ #define E1000_M88E1543_PAGE_ADDR 0x16 /* Page Offset Register */ #define E1000_M88E1543_EEE_CTRL_1 0x0 #define E1000_M88E1543_EEE_CTRL_1_MS 0x0001 /* EEE Master/Slave */ +#define E1000_M88E1543_FIBER_CTRL 0x0 #define E1000_EEE_ADV_DEV_I354 7 #define E1000_EEE_ADV_ADDR_I354 60 #define E1000_EEE_ADV_100_SUPPORTED (1 << 1) /* 100BaseTx EEE Supported */ diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c index 65d931669f81..29f59c76878a 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.c +++ b/drivers/net/ethernet/intel/igb/e1000_i210.c @@ -900,3 +900,30 @@ s32 igb_pll_workaround_i210(struct e1000_hw *hw) wr32(E1000_MDICNFG, mdicnfg); return ret_val; } + +/** + * igb_get_cfg_done_i210 - Read config done bit + * @hw: pointer to the HW structure + * + * Read the management control register for the config done bit for + * completion status. NOTE: silicon which is EEPROM-less will fail trying + * to read the config done bit, so an error is *ONLY* logged and returns + * 0. If we were to return with error, EEPROM-less silicon + * would not be able to be reset or change link. + **/ +s32 igb_get_cfg_done_i210(struct e1000_hw *hw) +{ + s32 timeout = PHY_CFG_TIMEOUT; + u32 mask = E1000_NVM_CFG_DONE_PORT_0; + + while (timeout) { + if (rd32(E1000_EEMNGCTL_I210) & mask) + break; + usleep_range(1000, 2000); + timeout--; + } + if (!timeout) + hw_dbg("MNG configuration cycle has not completed.\n"); + + return 0; +} diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.h b/drivers/net/ethernet/intel/igb/e1000_i210.h index 3442b6357d01..eaa68a50cb3b 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.h +++ b/drivers/net/ethernet/intel/igb/e1000_i210.h @@ -34,6 +34,7 @@ s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data); s32 igb_init_nvm_params_i210(struct e1000_hw *hw); bool igb_get_flash_presence_i210(struct e1000_hw *hw); s32 igb_pll_workaround_i210(struct e1000_hw *hw); +s32 igb_get_cfg_done_i210(struct e1000_hw *hw); #define E1000_STM_OPCODE 0xDB00 #define E1000_EEPROM_FLASH_SIZE_WORD 0x11 diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c index 23ec28f43f6d..c0df40f2b295 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.c +++ b/drivers/net/ethernet/intel/igb/e1000_phy.c @@ -2278,6 +2278,100 @@ out: } /** + * igb_initialize_M88E1543_phy - Initialize M88E1512 PHY + * @hw: pointer to the HW structure + * + * Initialize Marvell 1543 to work correctly with Avoton. + **/ +s32 igb_initialize_M88E1543_phy(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = 0; + + /* Switch to PHY page 0xFF. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FF); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x214B); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2144); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x0C28); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2146); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xB233); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x214D); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xDC0C); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2159); + if (ret_val) + goto out; + + /* Switch to PHY page 0xFB. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FB); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_3, 0x0C0D); + if (ret_val) + goto out; + + /* Switch to PHY page 0x12. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x12); + if (ret_val) + goto out; + + /* Change mode to SGMII-to-Copper */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_MODE, 0x8001); + if (ret_val) + goto out; + + /* Switch to PHY page 1. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x1); + if (ret_val) + goto out; + + /* Change mode to 1000BASE-X/SGMII and autoneg enable */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_FIBER_CTRL, 0x9140); + if (ret_val) + goto out; + + /* Return the PHY to page 0. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0); + if (ret_val) + goto out; + + ret_val = igb_phy_sw_reset(hw); + if (ret_val) { + hw_dbg("Error committing the PHY changes\n"); + return ret_val; + } + + /* msec_delay(1000); */ + usleep_range(1000, 2000); +out: + return ret_val; +} + +/** * igb_power_up_phy_copper - Restore copper link in case of PHY power down * @hw: pointer to the HW structure * diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.h b/drivers/net/ethernet/intel/igb/e1000_phy.h index 24d55edbb0e3..aa1ae61a61d8 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.h +++ b/drivers/net/ethernet/intel/igb/e1000_phy.h @@ -62,6 +62,7 @@ void igb_power_up_phy_copper(struct e1000_hw *hw); void igb_power_down_phy_copper(struct e1000_hw *hw); s32 igb_phy_init_script_igp3(struct e1000_hw *hw); s32 igb_initialize_M88E1512_phy(struct e1000_hw *hw); +s32 igb_initialize_M88E1543_phy(struct e1000_hw *hw); s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data); s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data); s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data); diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h index 4af2870e49f8..21d9d02885cb 100644 --- a/drivers/net/ethernet/intel/igb/e1000_regs.h +++ b/drivers/net/ethernet/intel/igb/e1000_regs.h @@ -66,6 +66,7 @@ #define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ #define E1000_PBS 0x01008 /* Packet Buffer Size */ #define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ +#define E1000_EEMNGCTL_I210 0x12030 /* MNG EEprom Control */ #define E1000_EEARBC_I210 0x12024 /* EEPROM Auto Read Bus Control */ #define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ #define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */ @@ -385,8 +386,7 @@ do { \ #define array_wr32(reg, offset, value) \ wr32((reg) + ((offset) << 2), (value)) -#define array_rd32(reg, offset) \ - (readl(hw->hw_addr + reg + ((offset) << 2))) +#define array_rd32(reg, offset) (igb_rd32(hw, reg + ((offset) << 2))) /* DMA Coalescing registers */ #define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */ diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index 1a2f1cc44b28..e3cb93bdb21a 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -389,6 +389,8 @@ struct igb_adapter { u16 link_speed; u16 link_duplex; + u8 __iomem *io_addr; /* Mainly for iounmap use */ + struct work_struct reset_task; struct work_struct watchdog_task; bool fc_autoneg; diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index ea7b09887245..7afde455326d 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -946,7 +946,6 @@ static void igb_configure_msix(struct igb_adapter *adapter) static int igb_request_msix(struct igb_adapter *adapter) { struct net_device *netdev = adapter->netdev; - struct e1000_hw *hw = &adapter->hw; int i, err = 0, vector = 0, free_vector = 0; err = request_irq(adapter->msix_entries[vector].vector, @@ -959,7 +958,7 @@ static int igb_request_msix(struct igb_adapter *adapter) vector++; - q_vector->itr_register = hw->hw_addr + E1000_EITR(vector); + q_vector->itr_register = adapter->io_addr + E1000_EITR(vector); if (q_vector->rx.ring && q_vector->tx.ring) sprintf(q_vector->name, "%s-TxRx-%u", netdev->name, @@ -1230,7 +1229,7 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter, q_vector->tx.work_limit = adapter->tx_work_limit; /* initialize ITR configuration */ - q_vector->itr_register = adapter->hw.hw_addr + E1000_EITR(0); + q_vector->itr_register = adapter->io_addr + E1000_EITR(0); q_vector->itr_val = IGB_START_ITR; /* initialize pointer to rings */ @@ -2294,9 +2293,11 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); err = -EIO; - hw->hw_addr = pci_iomap(pdev, 0, 0); - if (!hw->hw_addr) + adapter->io_addr = pci_iomap(pdev, 0, 0); + if (!adapter->io_addr) goto err_ioremap; + /* hw->hw_addr can be altered, we'll use adapter->io_addr for unmap */ + hw->hw_addr = adapter->io_addr; netdev->netdev_ops = &igb_netdev_ops; igb_set_ethtool_ops(netdev); @@ -2656,7 +2657,7 @@ err_sw_init: #ifdef CONFIG_PCI_IOV igb_disable_sriov(pdev); #endif - pci_iounmap(pdev, hw->hw_addr); + pci_iounmap(pdev, adapter->io_addr); err_ioremap: free_netdev(netdev); err_alloc_etherdev: @@ -2823,7 +2824,7 @@ static void igb_remove(struct pci_dev *pdev) igb_clear_interrupt_scheme(adapter); - pci_iounmap(pdev, hw->hw_addr); + pci_iounmap(pdev, adapter->io_addr); if (hw->flash_address) iounmap(hw->flash_address); pci_release_selected_regions(pdev, @@ -2856,6 +2857,13 @@ static void igb_probe_vfs(struct igb_adapter *adapter) if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211)) return; + /* Of the below we really only want the effect of getting + * IGB_FLAG_HAS_MSIX set (if available), without which + * igb_enable_sriov() has no effect. + */ + igb_set_interrupt_capability(adapter, true); + igb_reset_interrupt_capability(adapter); + pci_sriov_set_totalvfs(pdev, 7); igb_enable_sriov(pdev, max_vfs); |