diff options
Diffstat (limited to 'drivers/nfc/s3fwrn5')
| -rw-r--r-- | drivers/nfc/s3fwrn5/Kconfig | 17 | ||||
| -rw-r--r-- | drivers/nfc/s3fwrn5/Makefile | 4 | ||||
| -rw-r--r-- | drivers/nfc/s3fwrn5/core.c | 50 | ||||
| -rw-r--r-- | drivers/nfc/s3fwrn5/firmware.c | 74 | ||||
| -rw-r--r-- | drivers/nfc/s3fwrn5/firmware.h | 3 | ||||
| -rw-r--r-- | drivers/nfc/s3fwrn5/i2c.c | 163 | ||||
| -rw-r--r-- | drivers/nfc/s3fwrn5/nci.c | 51 | ||||
| -rw-r--r-- | drivers/nfc/s3fwrn5/nci.h | 24 | ||||
| -rw-r--r-- | drivers/nfc/s3fwrn5/phy_common.c | 76 | ||||
| -rw-r--r-- | drivers/nfc/s3fwrn5/phy_common.h | 37 | ||||
| -rw-r--r-- | drivers/nfc/s3fwrn5/s3fwrn5.h | 11 | ||||
| -rw-r--r-- | drivers/nfc/s3fwrn5/uart.c | 196 |
12 files changed, 478 insertions, 228 deletions
diff --git a/drivers/nfc/s3fwrn5/Kconfig b/drivers/nfc/s3fwrn5/Kconfig index c4e86df392a4..8a6b1a79de25 100644 --- a/drivers/nfc/s3fwrn5/Kconfig +++ b/drivers/nfc/s3fwrn5/Kconfig @@ -2,7 +2,8 @@ config NFC_S3FWRN5 tristate select CRYPTO - ---help--- + select CRYPTO_HASH + help Core driver for Samsung S3FWRN5 NFC chip. Contains core utilities of chip. It's intended to be used by PHYs to avoid duplicating lots of common code. @@ -12,10 +13,22 @@ config NFC_S3FWRN5_I2C depends on NFC_NCI && I2C select NFC_S3FWRN5 default n - ---help--- + help This module adds support for an I2C interface to the S3FWRN5 chip. Select this if your platform is using the I2C bus. To compile this driver as a module, choose m here. The module will be called s3fwrn5_i2c.ko. Say N if unsure. + +config NFC_S3FWRN82_UART + tristate "Samsung S3FWRN82 UART support" + depends on NFC_NCI && SERIAL_DEV_BUS + select NFC_S3FWRN5 + help + This module adds support for a UART interface to the S3FWRN82 chip. + Select this if your platform is using the UART bus. + + To compile this driver as a module, choose m here. The module will + be called s3fwrn82_uart.ko. + Say N if unsure. diff --git a/drivers/nfc/s3fwrn5/Makefile b/drivers/nfc/s3fwrn5/Makefile index d0ffa35f50e8..7da827ac149c 100644 --- a/drivers/nfc/s3fwrn5/Makefile +++ b/drivers/nfc/s3fwrn5/Makefile @@ -3,8 +3,10 @@ # Makefile for Samsung S3FWRN5 NFC driver # -s3fwrn5-objs = core.o firmware.o nci.o +s3fwrn5-objs = core.o firmware.o nci.o phy_common.o s3fwrn5_i2c-objs = i2c.o +s3fwrn82_uart-objs = uart.o obj-$(CONFIG_NFC_S3FWRN5) += s3fwrn5.o obj-$(CONFIG_NFC_S3FWRN5_I2C) += s3fwrn5_i2c.o +obj-$(CONFIG_NFC_S3FWRN82_UART) += s3fwrn82_uart.o diff --git a/drivers/nfc/s3fwrn5/core.c b/drivers/nfc/s3fwrn5/core.c index 91d4d5b28a7d..0270e05b68df 100644 --- a/drivers/nfc/s3fwrn5/core.c +++ b/drivers/nfc/s3fwrn5/core.c @@ -20,13 +20,26 @@ NFC_PROTO_ISO14443_B_MASK | \ NFC_PROTO_ISO15693_MASK) +static int s3fwrn5_firmware_init(struct s3fwrn5_info *info) +{ + struct s3fwrn5_fw_info *fw_info = &info->fw_info; + int ret; + + s3fwrn5_fw_init(fw_info, "sec_s3fwrn5_firmware.bin"); + + /* Get firmware data */ + ret = s3fwrn5_fw_request_firmware(fw_info); + if (ret < 0) + dev_err(&fw_info->ndev->nfc_dev->dev, + "Failed to get fw file, ret=%02x\n", ret); + return ret; +} + static int s3fwrn5_firmware_update(struct s3fwrn5_info *info) { bool need_update; int ret; - s3fwrn5_fw_init(&info->fw_info, "sec_s3fwrn5_firmware.bin"); - /* Update firmware */ s3fwrn5_set_wake(info, false); @@ -97,11 +110,15 @@ static int s3fwrn5_nci_send(struct nci_dev *ndev, struct sk_buff *skb) } ret = s3fwrn5_write(info, skb); - if (ret < 0) + if (ret < 0) { kfree_skb(skb); + mutex_unlock(&info->mutex); + return ret; + } + consume_skb(skb); mutex_unlock(&info->mutex); - return ret; + return 0; } static int s3fwrn5_nci_post_setup(struct nci_dev *ndev) @@ -109,9 +126,14 @@ static int s3fwrn5_nci_post_setup(struct nci_dev *ndev) struct s3fwrn5_info *info = nci_get_drvdata(ndev); int ret; + if (s3fwrn5_firmware_init(info)) { + //skip bootloader mode + return 0; + } + ret = s3fwrn5_firmware_update(info); if (ret < 0) - goto out; + return ret; /* NCI core reset */ @@ -120,23 +142,22 @@ static int s3fwrn5_nci_post_setup(struct nci_dev *ndev) ret = nci_core_reset(info->ndev); if (ret < 0) - goto out; - - ret = nci_core_init(info->ndev); + return ret; -out: - return ret; + return nci_core_init(info->ndev); } -static struct nci_ops s3fwrn5_nci_ops = { +static const struct nci_ops s3fwrn5_nci_ops = { .open = s3fwrn5_nci_open, .close = s3fwrn5_nci_close, .send = s3fwrn5_nci_send, .post_setup = s3fwrn5_nci_post_setup, + .prop_ops = s3fwrn5_nci_prop_ops, + .n_prop_ops = ARRAY_SIZE(s3fwrn5_nci_prop_ops), }; int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev, - const struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload) + const struct s3fwrn5_phy_ops *phy_ops) { struct s3fwrn5_info *info; int ret; @@ -148,14 +169,10 @@ int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev, info->phy_id = phy_id; info->pdev = pdev; info->phy_ops = phy_ops; - info->max_payload = max_payload; mutex_init(&info->mutex); s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD); - s3fwrn5_nci_get_prop_ops(&s3fwrn5_nci_ops.prop_ops, - &s3fwrn5_nci_ops.n_prop_ops); - info->ndev = nci_allocate_device(&s3fwrn5_nci_ops, S3FWRN5_NFC_PROTOCOLS, 0, 0); if (!info->ndev) @@ -198,6 +215,7 @@ int s3fwrn5_recv_frame(struct nci_dev *ndev, struct sk_buff *skb, case S3FWRN5_MODE_FW: return s3fwrn5_fw_recv_frame(ndev, skb); default: + kfree_skb(skb); return -ENODEV; } } diff --git a/drivers/nfc/s3fwrn5/firmware.c b/drivers/nfc/s3fwrn5/firmware.c index de613c623a2c..c20fdbac51c5 100644 --- a/drivers/nfc/s3fwrn5/firmware.c +++ b/drivers/nfc/s3fwrn5/firmware.c @@ -9,7 +9,7 @@ #include <linux/completion.h> #include <linux/firmware.h> #include <crypto/hash.h> -#include <crypto/sha.h> +#include <crypto/sha1.h> #include "s3fwrn5.h" #include "firmware.h" @@ -266,7 +266,7 @@ static int s3fwrn5_fw_complete_update_mode(struct s3fwrn5_fw_info *fw_info) } /* - * Firmware header stucture: + * Firmware header structure: * * 0x00 - 0x0B : Date and time string (w/o NUL termination) * 0x10 - 0x13 : Firmware version @@ -280,7 +280,7 @@ static int s3fwrn5_fw_complete_update_mode(struct s3fwrn5_fw_info *fw_info) #define S3FWRN5_FW_IMAGE_HEADER_SIZE 44 -static int s3fwrn5_fw_request_firmware(struct s3fwrn5_fw_info *fw_info) +int s3fwrn5_fw_request_firmware(struct s3fwrn5_fw_info *fw_info) { struct s3fwrn5_fw_image *fw = &fw_info->fw; u32 sig_off; @@ -293,8 +293,10 @@ static int s3fwrn5_fw_request_firmware(struct s3fwrn5_fw_info *fw_info) if (ret < 0) return ret; - if (fw->fw->size < S3FWRN5_FW_IMAGE_HEADER_SIZE) + if (fw->fw->size < S3FWRN5_FW_IMAGE_HEADER_SIZE) { + release_firmware(fw->fw); return -EINVAL; + } memcpy(fw->date, fw->fw->data + 0x00, 12); fw->date[12] = '\0'; @@ -348,31 +350,22 @@ static int s3fwrn5_fw_get_base_addr( } static inline bool -s3fwrn5_fw_is_custom(struct s3fwrn5_fw_cmd_get_bootinfo_rsp *bootinfo) +s3fwrn5_fw_is_custom(const struct s3fwrn5_fw_cmd_get_bootinfo_rsp *bootinfo) { return !!bootinfo->hw_version[2]; } int s3fwrn5_fw_setup(struct s3fwrn5_fw_info *fw_info) { + struct device *dev = &fw_info->ndev->nfc_dev->dev; struct s3fwrn5_fw_cmd_get_bootinfo_rsp bootinfo; int ret; - /* Get firmware data */ - - ret = s3fwrn5_fw_request_firmware(fw_info); - if (ret < 0) { - dev_err(&fw_info->ndev->nfc_dev->dev, - "Failed to get fw file, ret=%02x\n", ret); - return ret; - } - /* Get bootloader info */ ret = s3fwrn5_fw_get_bootinfo(fw_info, &bootinfo); if (ret < 0) { - dev_err(&fw_info->ndev->nfc_dev->dev, - "Failed to get bootinfo, ret=%02x\n", ret); + dev_err(dev, "Failed to get bootinfo, ret=%02x\n", ret); goto err; } @@ -380,8 +373,7 @@ int s3fwrn5_fw_setup(struct s3fwrn5_fw_info *fw_info) ret = s3fwrn5_fw_get_base_addr(&bootinfo, &fw_info->base_addr); if (ret < 0) { - dev_err(&fw_info->ndev->nfc_dev->dev, - "Unknown hardware version\n"); + dev_err(dev, "Unknown hardware version\n"); goto err; } @@ -399,7 +391,7 @@ err: return ret; } -bool s3fwrn5_fw_check_version(struct s3fwrn5_fw_info *fw_info, u32 version) +bool s3fwrn5_fw_check_version(const struct s3fwrn5_fw_info *fw_info, u32 version) { struct s3fwrn5_fw_version *new = (void *) &fw_info->fw.version; struct s3fwrn5_fw_version *old = (void *) &version; @@ -416,6 +408,7 @@ bool s3fwrn5_fw_check_version(struct s3fwrn5_fw_info *fw_info, u32 version) int s3fwrn5_fw_download(struct s3fwrn5_fw_info *fw_info) { + struct device *dev = &fw_info->ndev->nfc_dev->dev; struct s3fwrn5_fw_image *fw = &fw_info->fw; u8 hash_data[SHA1_DIGEST_SIZE]; struct crypto_shash *tfm; @@ -428,63 +421,46 @@ int s3fwrn5_fw_download(struct s3fwrn5_fw_info *fw_info) tfm = crypto_alloc_shash("sha1", 0, 0); if (IS_ERR(tfm)) { - ret = PTR_ERR(tfm); - dev_err(&fw_info->ndev->nfc_dev->dev, - "Cannot allocate shash (code=%d)\n", ret); - goto out; + dev_err(dev, "Cannot allocate shash (code=%pe)\n", tfm); + return PTR_ERR(tfm); } - { - SHASH_DESC_ON_STACK(desc, tfm); - - desc->tfm = tfm; - - ret = crypto_shash_digest(desc, fw->image, image_size, - hash_data); - shash_desc_zero(desc); - } + ret = crypto_shash_tfm_digest(tfm, fw->image, image_size, hash_data); crypto_free_shash(tfm); if (ret) { - dev_err(&fw_info->ndev->nfc_dev->dev, - "Cannot compute hash (code=%d)\n", ret); - goto out; + dev_err(dev, "Cannot compute hash (code=%d)\n", ret); + return ret; } /* Firmware update process */ - dev_info(&fw_info->ndev->nfc_dev->dev, - "Firmware update: %s\n", fw_info->fw_name); + dev_info(dev, "Firmware update: %s\n", fw_info->fw_name); ret = s3fwrn5_fw_enter_update_mode(fw_info, hash_data, SHA1_DIGEST_SIZE, fw_info->sig, fw_info->sig_size); if (ret < 0) { - dev_err(&fw_info->ndev->nfc_dev->dev, - "Unable to enter update mode\n"); - goto out; + dev_err(dev, "Unable to enter update mode\n"); + return ret; } for (off = 0; off < image_size; off += fw_info->sector_size) { ret = s3fwrn5_fw_update_sector(fw_info, fw_info->base_addr + off, fw->image + off); if (ret < 0) { - dev_err(&fw_info->ndev->nfc_dev->dev, - "Firmware update error (code=%d)\n", ret); - goto out; + dev_err(dev, "Firmware update error (code=%d)\n", ret); + return ret; } } ret = s3fwrn5_fw_complete_update_mode(fw_info); if (ret < 0) { - dev_err(&fw_info->ndev->nfc_dev->dev, - "Unable to complete update mode\n"); - goto out; + dev_err(dev, "Unable to complete update mode\n"); + return ret; } - dev_info(&fw_info->ndev->nfc_dev->dev, - "Firmware update: success\n"); + dev_info(dev, "Firmware update: success\n"); -out: return ret; } diff --git a/drivers/nfc/s3fwrn5/firmware.h b/drivers/nfc/s3fwrn5/firmware.h index cf1a83a5a525..3a82ce5837fb 100644 --- a/drivers/nfc/s3fwrn5/firmware.h +++ b/drivers/nfc/s3fwrn5/firmware.h @@ -89,9 +89,10 @@ struct s3fwrn5_fw_info { char parity; }; +int s3fwrn5_fw_request_firmware(struct s3fwrn5_fw_info *fw_info); void s3fwrn5_fw_init(struct s3fwrn5_fw_info *fw_info, const char *fw_name); int s3fwrn5_fw_setup(struct s3fwrn5_fw_info *fw_info); -bool s3fwrn5_fw_check_version(struct s3fwrn5_fw_info *fw_info, u32 version); +bool s3fwrn5_fw_check_version(const struct s3fwrn5_fw_info *fw_info, u32 version); int s3fwrn5_fw_download(struct s3fwrn5_fw_info *fw_info); void s3fwrn5_fw_cleanup(struct s3fwrn5_fw_info *fw_info); diff --git a/drivers/nfc/s3fwrn5/i2c.c b/drivers/nfc/s3fwrn5/i2c.c index b4eb926d220a..f824dc7099ce 100644 --- a/drivers/nfc/s3fwrn5/i2c.c +++ b/drivers/nfc/s3fwrn5/i2c.c @@ -6,6 +6,7 @@ * Robert Baldyga <r.baldyga@samsung.com> */ +#include <linux/clk.h> #include <linux/i2c.h> #include <linux/gpio.h> #include <linux/delay.h> @@ -15,76 +16,31 @@ #include <net/nfc/nfc.h> -#include "s3fwrn5.h" +#include "phy_common.h" #define S3FWRN5_I2C_DRIVER_NAME "s3fwrn5_i2c" -#define S3FWRN5_I2C_MAX_PAYLOAD 32 -#define S3FWRN5_EN_WAIT_TIME 150 - struct s3fwrn5_i2c_phy { + struct phy_common common; struct i2c_client *i2c_dev; - struct nci_dev *ndev; - - unsigned int gpio_en; - unsigned int gpio_fw_wake; + struct clk *clk; - struct mutex mutex; - - enum s3fwrn5_mode mode; unsigned int irq_skip:1; }; -static void s3fwrn5_i2c_set_wake(void *phy_id, bool wake) -{ - struct s3fwrn5_i2c_phy *phy = phy_id; - - mutex_lock(&phy->mutex); - gpio_set_value(phy->gpio_fw_wake, wake); - msleep(S3FWRN5_EN_WAIT_TIME/2); - mutex_unlock(&phy->mutex); -} - static void s3fwrn5_i2c_set_mode(void *phy_id, enum s3fwrn5_mode mode) { struct s3fwrn5_i2c_phy *phy = phy_id; - mutex_lock(&phy->mutex); + mutex_lock(&phy->common.mutex); - if (phy->mode == mode) + if (s3fwrn5_phy_power_ctrl(&phy->common, mode) == false) goto out; - phy->mode = mode; - - gpio_set_value(phy->gpio_en, 1); - gpio_set_value(phy->gpio_fw_wake, 0); - if (mode == S3FWRN5_MODE_FW) - gpio_set_value(phy->gpio_fw_wake, 1); - - if (mode != S3FWRN5_MODE_COLD) { - msleep(S3FWRN5_EN_WAIT_TIME); - gpio_set_value(phy->gpio_en, 0); - msleep(S3FWRN5_EN_WAIT_TIME/2); - } - phy->irq_skip = true; out: - mutex_unlock(&phy->mutex); -} - -static enum s3fwrn5_mode s3fwrn5_i2c_get_mode(void *phy_id) -{ - struct s3fwrn5_i2c_phy *phy = phy_id; - enum s3fwrn5_mode mode; - - mutex_lock(&phy->mutex); - - mode = phy->mode; - - mutex_unlock(&phy->mutex); - - return mode; + mutex_unlock(&phy->common.mutex); } static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb) @@ -92,7 +48,7 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb) struct s3fwrn5_i2c_phy *phy = phy_id; int ret; - mutex_lock(&phy->mutex); + mutex_lock(&phy->common.mutex); phy->irq_skip = false; @@ -103,7 +59,7 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb) ret = i2c_master_send(phy->i2c_dev, skb->data, skb->len); } - mutex_unlock(&phy->mutex); + mutex_unlock(&phy->common.mutex); if (ret < 0) return ret; @@ -115,9 +71,9 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb) } static const struct s3fwrn5_phy_ops i2c_phy_ops = { - .set_wake = s3fwrn5_i2c_set_wake, + .set_wake = s3fwrn5_phy_set_wake, .set_mode = s3fwrn5_i2c_set_mode, - .get_mode = s3fwrn5_i2c_get_mode, + .get_mode = s3fwrn5_phy_get_mode, .write = s3fwrn5_i2c_write, }; @@ -129,7 +85,7 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy) char hdr[4]; int ret; - hdr_size = (phy->mode == S3FWRN5_MODE_NCI) ? + hdr_size = (phy->common.mode == S3FWRN5_MODE_NCI) ? NCI_CTRL_HDR_SIZE : S3FWRN5_FW_HDR_SIZE; ret = i2c_master_recv(phy->i2c_dev, hdr, hdr_size); if (ret < 0) @@ -138,7 +94,7 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy) if (ret < hdr_size) return -EBADMSG; - data_len = (phy->mode == S3FWRN5_MODE_NCI) ? + data_len = (phy->common.mode == S3FWRN5_MODE_NCI) ? ((struct nci_ctrl_hdr *)hdr)->plen : ((struct s3fwrn5_fw_header *)hdr)->len; @@ -158,36 +114,34 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy) } out: - return s3fwrn5_recv_frame(phy->ndev, skb, phy->mode); + return s3fwrn5_recv_frame(phy->common.ndev, skb, phy->common.mode); } static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id) { struct s3fwrn5_i2c_phy *phy = phy_id; - int ret = 0; - if (!phy || !phy->ndev) { + if (!phy || !phy->common.ndev) { WARN_ON_ONCE(1); return IRQ_NONE; } - mutex_lock(&phy->mutex); + mutex_lock(&phy->common.mutex); if (phy->irq_skip) goto out; - switch (phy->mode) { + switch (phy->common.mode) { case S3FWRN5_MODE_NCI: case S3FWRN5_MODE_FW: - ret = s3fwrn5_i2c_read(phy); + s3fwrn5_i2c_read(phy); break; case S3FWRN5_MODE_COLD: - ret = -EREMOTEIO; break; } out: - mutex_unlock(&phy->mutex); + mutex_unlock(&phy->common.mutex); return IRQ_HANDLED; } @@ -200,13 +154,25 @@ static int s3fwrn5_i2c_parse_dt(struct i2c_client *client) if (!np) return -ENODEV; - phy->gpio_en = of_get_named_gpio(np, "s3fwrn5,en-gpios", 0); - if (!gpio_is_valid(phy->gpio_en)) - return -ENODEV; + phy->common.gpio_en = of_get_named_gpio(np, "en-gpios", 0); + if (!gpio_is_valid(phy->common.gpio_en)) { + /* Support also deprecated property */ + phy->common.gpio_en = of_get_named_gpio(np, + "s3fwrn5,en-gpios", + 0); + if (!gpio_is_valid(phy->common.gpio_en)) + return -ENODEV; + } - phy->gpio_fw_wake = of_get_named_gpio(np, "s3fwrn5,fw-gpios", 0); - if (!gpio_is_valid(phy->gpio_fw_wake)) - return -ENODEV; + phy->common.gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0); + if (!gpio_is_valid(phy->common.gpio_fw_wake)) { + /* Support also deprecated property */ + phy->common.gpio_fw_wake = of_get_named_gpio(np, + "s3fwrn5,fw-gpios", + 0); + if (!gpio_is_valid(phy->common.gpio_fw_wake)) + return -ENODEV; + } return 0; } @@ -221,8 +187,8 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client, if (!phy) return -ENOMEM; - mutex_init(&phy->mutex); - phy->mode = S3FWRN5_MODE_COLD; + mutex_init(&phy->common.mutex); + phy->common.mode = S3FWRN5_MODE_COLD; phy->irq_skip = true; phy->i2c_dev = client; @@ -232,37 +198,60 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client, if (ret < 0) return ret; - ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_en, - GPIOF_OUT_INIT_HIGH, "s3fwrn5_en"); + ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->common.gpio_en, + GPIOF_OUT_INIT_HIGH, "s3fwrn5_en"); if (ret < 0) return ret; - ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_fw_wake, - GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake"); + ret = devm_gpio_request_one(&phy->i2c_dev->dev, + phy->common.gpio_fw_wake, + GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake"); if (ret < 0) return ret; - ret = s3fwrn5_probe(&phy->ndev, phy, &phy->i2c_dev->dev, &i2c_phy_ops, - S3FWRN5_I2C_MAX_PAYLOAD); - if (ret < 0) + phy->clk = devm_clk_get_optional(&client->dev, NULL); + if (IS_ERR(phy->clk)) + return dev_err_probe(&client->dev, PTR_ERR(phy->clk), + "failed to get clock\n"); + + /* + * S3FWRN5 depends on a clock input ("XI" pin) to function properly. + * Depending on the hardware configuration this could be an always-on + * oscillator or some external clock that must be explicitly enabled. + * Make sure the clock is running before starting S3FWRN5. + */ + ret = clk_prepare_enable(phy->clk); + if (ret < 0) { + dev_err(&client->dev, "failed to enable clock: %d\n", ret); return ret; + } + + ret = s3fwrn5_probe(&phy->common.ndev, phy, &phy->i2c_dev->dev, + &i2c_phy_ops); + if (ret < 0) + goto disable_clk; ret = devm_request_threaded_irq(&client->dev, phy->i2c_dev->irq, NULL, - s3fwrn5_i2c_irq_thread_fn, IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + s3fwrn5_i2c_irq_thread_fn, IRQF_ONESHOT, S3FWRN5_I2C_DRIVER_NAME, phy); if (ret) - s3fwrn5_remove(phy->ndev); + goto s3fwrn5_remove; + return 0; + +s3fwrn5_remove: + s3fwrn5_remove(phy->common.ndev); +disable_clk: + clk_disable_unprepare(phy->clk); return ret; } -static int s3fwrn5_i2c_remove(struct i2c_client *client) +static void s3fwrn5_i2c_remove(struct i2c_client *client) { struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client); - s3fwrn5_remove(phy->ndev); - - return 0; + s3fwrn5_remove(phy->common.ndev); + clk_disable_unprepare(phy->clk); } static const struct i2c_device_id s3fwrn5_i2c_id_table[] = { @@ -271,7 +260,7 @@ static const struct i2c_device_id s3fwrn5_i2c_id_table[] = { }; MODULE_DEVICE_TABLE(i2c, s3fwrn5_i2c_id_table); -static const struct of_device_id of_s3fwrn5_i2c_match[] = { +static const struct of_device_id of_s3fwrn5_i2c_match[] __maybe_unused = { { .compatible = "samsung,s3fwrn5-i2c", }, {} }; diff --git a/drivers/nfc/s3fwrn5/nci.c b/drivers/nfc/s3fwrn5/nci.c index 103bf5c92bdc..ca6828f55ba0 100644 --- a/drivers/nfc/s3fwrn5/nci.c +++ b/drivers/nfc/s3fwrn5/nci.c @@ -20,17 +20,7 @@ static int s3fwrn5_nci_prop_rsp(struct nci_dev *ndev, struct sk_buff *skb) return 0; } -static struct nci_driver_ops s3fwrn5_nci_prop_ops[] = { - { - .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, - NCI_PROP_AGAIN), - .rsp = s3fwrn5_nci_prop_rsp, - }, - { - .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, - NCI_PROP_GET_RFREG), - .rsp = s3fwrn5_nci_prop_rsp, - }, +const struct nci_driver_ops s3fwrn5_nci_prop_ops[4] = { { .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, NCI_PROP_SET_RFREG), @@ -38,16 +28,6 @@ static struct nci_driver_ops s3fwrn5_nci_prop_ops[] = { }, { .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, - NCI_PROP_GET_RFREG_VER), - .rsp = s3fwrn5_nci_prop_rsp, - }, - { - .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, - NCI_PROP_SET_RFREG_VER), - .rsp = s3fwrn5_nci_prop_rsp, - }, - { - .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, NCI_PROP_START_RFREG), .rsp = s3fwrn5_nci_prop_rsp, }, @@ -61,23 +41,13 @@ static struct nci_driver_ops s3fwrn5_nci_prop_ops[] = { NCI_PROP_FW_CFG), .rsp = s3fwrn5_nci_prop_rsp, }, - { - .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, - NCI_PROP_WR_RESET), - .rsp = s3fwrn5_nci_prop_rsp, - }, }; -void s3fwrn5_nci_get_prop_ops(struct nci_driver_ops **ops, size_t *n) -{ - *ops = s3fwrn5_nci_prop_ops; - *n = ARRAY_SIZE(s3fwrn5_nci_prop_ops); -} - #define S3FWRN5_RFREG_SECTION_SIZE 252 int s3fwrn5_nci_rf_configure(struct s3fwrn5_info *info, const char *fw_name) { + struct device *dev = &info->ndev->nfc_dev->dev; const struct firmware *fw; struct nci_prop_fw_cfg_cmd fw_cfg; struct nci_prop_set_rfreg_cmd set_rfreg; @@ -86,7 +56,7 @@ int s3fwrn5_nci_rf_configure(struct s3fwrn5_info *info, const char *fw_name) int i, len; int ret; - ret = request_firmware(&fw, fw_name, &info->ndev->nfc_dev->dev); + ret = request_firmware(&fw, fw_name, dev); if (ret < 0) return ret; @@ -108,13 +78,11 @@ int s3fwrn5_nci_rf_configure(struct s3fwrn5_info *info, const char *fw_name) /* Start rfreg configuration */ - dev_info(&info->ndev->nfc_dev->dev, - "rfreg configuration update: %s\n", fw_name); + dev_info(dev, "rfreg configuration update: %s\n", fw_name); ret = nci_prop_cmd(info->ndev, NCI_PROP_START_RFREG, 0, NULL); if (ret < 0) { - dev_err(&info->ndev->nfc_dev->dev, - "Unable to start rfreg update\n"); + dev_err(dev, "Unable to start rfreg update\n"); goto out; } @@ -128,8 +96,7 @@ int s3fwrn5_nci_rf_configure(struct s3fwrn5_info *info, const char *fw_name) ret = nci_prop_cmd(info->ndev, NCI_PROP_SET_RFREG, len+1, (__u8 *)&set_rfreg); if (ret < 0) { - dev_err(&info->ndev->nfc_dev->dev, - "rfreg update error (code=%d)\n", ret); + dev_err(dev, "rfreg update error (code=%d)\n", ret); goto out; } set_rfreg.index++; @@ -141,13 +108,11 @@ int s3fwrn5_nci_rf_configure(struct s3fwrn5_info *info, const char *fw_name) ret = nci_prop_cmd(info->ndev, NCI_PROP_STOP_RFREG, sizeof(stop_rfreg), (__u8 *)&stop_rfreg); if (ret < 0) { - dev_err(&info->ndev->nfc_dev->dev, - "Unable to stop rfreg update\n"); + dev_err(dev, "Unable to stop rfreg update\n"); goto out; } - dev_info(&info->ndev->nfc_dev->dev, - "rfreg configuration update: success\n"); + dev_info(dev, "rfreg configuration update: success\n"); out: release_firmware(fw); return ret; diff --git a/drivers/nfc/s3fwrn5/nci.h b/drivers/nfc/s3fwrn5/nci.h index 23c0b28f247a..c2d906591e9e 100644 --- a/drivers/nfc/s3fwrn5/nci.h +++ b/drivers/nfc/s3fwrn5/nci.h @@ -11,9 +11,6 @@ #include "s3fwrn5.h" -#define NCI_PROP_AGAIN 0x01 - -#define NCI_PROP_GET_RFREG 0x21 #define NCI_PROP_SET_RFREG 0x22 struct nci_prop_set_rfreg_cmd { @@ -25,23 +22,6 @@ struct nci_prop_set_rfreg_rsp { __u8 status; }; -#define NCI_PROP_GET_RFREG_VER 0x24 - -struct nci_prop_get_rfreg_ver_rsp { - __u8 status; - __u8 data[8]; -}; - -#define NCI_PROP_SET_RFREG_VER 0x25 - -struct nci_prop_set_rfreg_ver_cmd { - __u8 data[8]; -}; - -struct nci_prop_set_rfreg_ver_rsp { - __u8 status; -}; - #define NCI_PROP_START_RFREG 0x26 struct nci_prop_start_rfreg_rsp { @@ -70,9 +50,7 @@ struct nci_prop_fw_cfg_rsp { __u8 status; }; -#define NCI_PROP_WR_RESET 0x2f - -void s3fwrn5_nci_get_prop_ops(struct nci_driver_ops **ops, size_t *n); +extern const struct nci_driver_ops s3fwrn5_nci_prop_ops[4]; int s3fwrn5_nci_rf_configure(struct s3fwrn5_info *info, const char *fw_name); #endif /* __LOCAL_S3FWRN5_NCI_H_ */ diff --git a/drivers/nfc/s3fwrn5/phy_common.c b/drivers/nfc/s3fwrn5/phy_common.c new file mode 100644 index 000000000000..81318478d5fd --- /dev/null +++ b/drivers/nfc/s3fwrn5/phy_common.c @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Link Layer for Samsung S3FWRN5 NCI based Driver + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + * Copyright (C) 2020 Samsung Electrnoics + * Bongsu Jeon <bongsu.jeon@samsung.com> + */ + +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/module.h> + +#include "phy_common.h" + +void s3fwrn5_phy_set_wake(void *phy_id, bool wake) +{ + struct phy_common *phy = phy_id; + + mutex_lock(&phy->mutex); + gpio_set_value(phy->gpio_fw_wake, wake); + if (wake) + msleep(S3FWRN5_EN_WAIT_TIME); + mutex_unlock(&phy->mutex); +} +EXPORT_SYMBOL(s3fwrn5_phy_set_wake); + +bool s3fwrn5_phy_power_ctrl(struct phy_common *phy, enum s3fwrn5_mode mode) +{ + if (phy->mode == mode) + return false; + + phy->mode = mode; + + gpio_set_value(phy->gpio_en, 1); + gpio_set_value(phy->gpio_fw_wake, 0); + if (mode == S3FWRN5_MODE_FW) + gpio_set_value(phy->gpio_fw_wake, 1); + + if (mode != S3FWRN5_MODE_COLD) { + msleep(S3FWRN5_EN_WAIT_TIME); + gpio_set_value(phy->gpio_en, 0); + msleep(S3FWRN5_EN_WAIT_TIME); + } + + return true; +} +EXPORT_SYMBOL(s3fwrn5_phy_power_ctrl); + +void s3fwrn5_phy_set_mode(void *phy_id, enum s3fwrn5_mode mode) +{ + struct phy_common *phy = phy_id; + + mutex_lock(&phy->mutex); + + s3fwrn5_phy_power_ctrl(phy, mode); + + mutex_unlock(&phy->mutex); +} +EXPORT_SYMBOL(s3fwrn5_phy_set_mode); + +enum s3fwrn5_mode s3fwrn5_phy_get_mode(void *phy_id) +{ + struct phy_common *phy = phy_id; + enum s3fwrn5_mode mode; + + mutex_lock(&phy->mutex); + + mode = phy->mode; + + mutex_unlock(&phy->mutex); + + return mode; +} +EXPORT_SYMBOL(s3fwrn5_phy_get_mode); diff --git a/drivers/nfc/s3fwrn5/phy_common.h b/drivers/nfc/s3fwrn5/phy_common.h new file mode 100644 index 000000000000..99749c9294d1 --- /dev/null +++ b/drivers/nfc/s3fwrn5/phy_common.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later + * + * Link Layer for Samsung S3FWRN5 NCI based Driver + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + * Copyright (C) 2020 Samsung Electrnoics + * Bongsu Jeon <bongsu.jeon@samsung.com> + */ + +#ifndef __NFC_S3FWRN5_PHY_COMMON_H +#define __NFC_S3FWRN5_PHY_COMMON_H + +#include <linux/mutex.h> +#include <net/nfc/nci_core.h> + +#include "s3fwrn5.h" + +#define S3FWRN5_EN_WAIT_TIME 20 + +struct phy_common { + struct nci_dev *ndev; + + int gpio_en; + int gpio_fw_wake; + + struct mutex mutex; + + enum s3fwrn5_mode mode; +}; + +void s3fwrn5_phy_set_wake(void *phy_id, bool wake); +bool s3fwrn5_phy_power_ctrl(struct phy_common *phy, enum s3fwrn5_mode mode); +void s3fwrn5_phy_set_mode(void *phy_id, enum s3fwrn5_mode mode); +enum s3fwrn5_mode s3fwrn5_phy_get_mode(void *phy_id); + +#endif /* __NFC_S3FWRN5_PHY_COMMON_H */ diff --git a/drivers/nfc/s3fwrn5/s3fwrn5.h b/drivers/nfc/s3fwrn5/s3fwrn5.h index ede68bb5eeae..bb8f936d13a2 100644 --- a/drivers/nfc/s3fwrn5/s3fwrn5.h +++ b/drivers/nfc/s3fwrn5/s3fwrn5.h @@ -34,7 +34,6 @@ struct s3fwrn5_info { struct device *pdev; const struct s3fwrn5_phy_ops *phy_ops; - unsigned int max_payload; struct s3fwrn5_fw_info fw_info; @@ -45,7 +44,7 @@ static inline int s3fwrn5_set_mode(struct s3fwrn5_info *info, enum s3fwrn5_mode mode) { if (!info->phy_ops->set_mode) - return -ENOTSUPP; + return -EOPNOTSUPP; info->phy_ops->set_mode(info->phy_id, mode); @@ -55,7 +54,7 @@ static inline int s3fwrn5_set_mode(struct s3fwrn5_info *info, static inline enum s3fwrn5_mode s3fwrn5_get_mode(struct s3fwrn5_info *info) { if (!info->phy_ops->get_mode) - return -ENOTSUPP; + return -EOPNOTSUPP; return info->phy_ops->get_mode(info->phy_id); } @@ -63,7 +62,7 @@ static inline enum s3fwrn5_mode s3fwrn5_get_mode(struct s3fwrn5_info *info) static inline int s3fwrn5_set_wake(struct s3fwrn5_info *info, bool wake) { if (!info->phy_ops->set_wake) - return -ENOTSUPP; + return -EOPNOTSUPP; info->phy_ops->set_wake(info->phy_id, wake); @@ -73,13 +72,13 @@ static inline int s3fwrn5_set_wake(struct s3fwrn5_info *info, bool wake) static inline int s3fwrn5_write(struct s3fwrn5_info *info, struct sk_buff *skb) { if (!info->phy_ops->write) - return -ENOTSUPP; + return -EOPNOTSUPP; return info->phy_ops->write(info->phy_id, skb); } int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev, - const struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload); + const struct s3fwrn5_phy_ops *phy_ops); void s3fwrn5_remove(struct nci_dev *ndev); int s3fwrn5_recv_frame(struct nci_dev *ndev, struct sk_buff *skb, diff --git a/drivers/nfc/s3fwrn5/uart.c b/drivers/nfc/s3fwrn5/uart.c new file mode 100644 index 000000000000..82ea35d748a5 --- /dev/null +++ b/drivers/nfc/s3fwrn5/uart.c @@ -0,0 +1,196 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * UART Link Layer for S3FWRN82 NCI based Driver + * + * Copyright (C) 2015 Samsung Electronics + * Robert Baldyga <r.baldyga@samsung.com> + * Copyright (C) 2020 Samsung Electronics + * Bongsu Jeon <bongsu.jeon@samsung.com> + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/nfc.h> +#include <linux/netdevice.h> +#include <linux/of.h> +#include <linux/serdev.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> + +#include "phy_common.h" + +#define S3FWRN82_NCI_HEADER 3 +#define S3FWRN82_NCI_IDX 2 +#define NCI_SKB_BUFF_LEN 258 + +struct s3fwrn82_uart_phy { + struct phy_common common; + struct serdev_device *ser_dev; + struct sk_buff *recv_skb; +}; + +static int s3fwrn82_uart_write(void *phy_id, struct sk_buff *out) +{ + struct s3fwrn82_uart_phy *phy = phy_id; + int err; + + err = serdev_device_write(phy->ser_dev, + out->data, out->len, + MAX_SCHEDULE_TIMEOUT); + if (err < 0) + return err; + + return 0; +} + +static const struct s3fwrn5_phy_ops uart_phy_ops = { + .set_wake = s3fwrn5_phy_set_wake, + .set_mode = s3fwrn5_phy_set_mode, + .get_mode = s3fwrn5_phy_get_mode, + .write = s3fwrn82_uart_write, +}; + +static int s3fwrn82_uart_read(struct serdev_device *serdev, + const unsigned char *data, + size_t count) +{ + struct s3fwrn82_uart_phy *phy = serdev_device_get_drvdata(serdev); + size_t i; + + for (i = 0; i < count; i++) { + skb_put_u8(phy->recv_skb, *data++); + + if (phy->recv_skb->len < S3FWRN82_NCI_HEADER) + continue; + + if ((phy->recv_skb->len - S3FWRN82_NCI_HEADER) + < phy->recv_skb->data[S3FWRN82_NCI_IDX]) + continue; + + s3fwrn5_recv_frame(phy->common.ndev, phy->recv_skb, + phy->common.mode); + phy->recv_skb = alloc_skb(NCI_SKB_BUFF_LEN, GFP_KERNEL); + if (!phy->recv_skb) + return 0; + } + + return i; +} + +static const struct serdev_device_ops s3fwrn82_serdev_ops = { + .receive_buf = s3fwrn82_uart_read, + .write_wakeup = serdev_device_write_wakeup, +}; + +static const struct of_device_id s3fwrn82_uart_of_match[] = { + { .compatible = "samsung,s3fwrn82", }, + {}, +}; +MODULE_DEVICE_TABLE(of, s3fwrn82_uart_of_match); + +static int s3fwrn82_uart_parse_dt(struct serdev_device *serdev) +{ + struct s3fwrn82_uart_phy *phy = serdev_device_get_drvdata(serdev); + struct device_node *np = serdev->dev.of_node; + + if (!np) + return -ENODEV; + + phy->common.gpio_en = of_get_named_gpio(np, "en-gpios", 0); + if (!gpio_is_valid(phy->common.gpio_en)) + return -ENODEV; + + phy->common.gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0); + if (!gpio_is_valid(phy->common.gpio_fw_wake)) + return -ENODEV; + + return 0; +} + +static int s3fwrn82_uart_probe(struct serdev_device *serdev) +{ + struct s3fwrn82_uart_phy *phy; + int ret = -ENOMEM; + + phy = devm_kzalloc(&serdev->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + goto err_exit; + + phy->recv_skb = alloc_skb(NCI_SKB_BUFF_LEN, GFP_KERNEL); + if (!phy->recv_skb) + goto err_exit; + + mutex_init(&phy->common.mutex); + phy->common.mode = S3FWRN5_MODE_COLD; + + phy->ser_dev = serdev; + serdev_device_set_drvdata(serdev, phy); + serdev_device_set_client_ops(serdev, &s3fwrn82_serdev_ops); + ret = serdev_device_open(serdev); + if (ret) { + dev_err(&serdev->dev, "Unable to open device\n"); + goto err_skb; + } + + ret = serdev_device_set_baudrate(serdev, 115200); + if (ret != 115200) { + ret = -EINVAL; + goto err_serdev; + } + + serdev_device_set_flow_control(serdev, false); + + ret = s3fwrn82_uart_parse_dt(serdev); + if (ret < 0) + goto err_serdev; + + ret = devm_gpio_request_one(&phy->ser_dev->dev, phy->common.gpio_en, + GPIOF_OUT_INIT_HIGH, "s3fwrn82_en"); + if (ret < 0) + goto err_serdev; + + ret = devm_gpio_request_one(&phy->ser_dev->dev, + phy->common.gpio_fw_wake, + GPIOF_OUT_INIT_LOW, "s3fwrn82_fw_wake"); + if (ret < 0) + goto err_serdev; + + ret = s3fwrn5_probe(&phy->common.ndev, phy, &phy->ser_dev->dev, + &uart_phy_ops); + if (ret < 0) + goto err_serdev; + + return ret; + +err_serdev: + serdev_device_close(serdev); +err_skb: + kfree_skb(phy->recv_skb); +err_exit: + return ret; +} + +static void s3fwrn82_uart_remove(struct serdev_device *serdev) +{ + struct s3fwrn82_uart_phy *phy = serdev_device_get_drvdata(serdev); + + s3fwrn5_remove(phy->common.ndev); + serdev_device_close(serdev); + kfree_skb(phy->recv_skb); +} + +static struct serdev_device_driver s3fwrn82_uart_driver = { + .probe = s3fwrn82_uart_probe, + .remove = s3fwrn82_uart_remove, + .driver = { + .name = "s3fwrn82_uart", + .of_match_table = s3fwrn82_uart_of_match, + }, +}; + +module_serdev_device_driver(s3fwrn82_uart_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("UART driver for Samsung NFC"); +MODULE_AUTHOR("Bongsu Jeon <bongsu.jeon@samsung.com>"); |