diff options
Diffstat (limited to 'drivers/of/platform.c')
| -rw-r--r-- | drivers/of/platform.c | 214 |
1 files changed, 144 insertions, 70 deletions
diff --git a/drivers/of/platform.c b/drivers/of/platform.c index bd47fbc53dc9..500436f9be7f 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -51,10 +51,6 @@ struct platform_device *of_find_device_by_node(struct device_node *np) } EXPORT_SYMBOL(of_find_device_by_node); -#if defined(CONFIG_PPC_DCR) -#include <asm/dcr.h> -#endif - #ifdef CONFIG_OF_ADDRESS /* * The following routines scan a subtree and registers a device for @@ -68,66 +64,35 @@ EXPORT_SYMBOL(of_find_device_by_node); * of_device_make_bus_id - Use the device node data to assign a unique name * @dev: pointer to device structure that is linked to a device tree node * - * This routine will first try using either the dcr-reg or the reg property - * value to derive a unique name. As a last resort it will use the node - * name followed by a unique number. + * This routine will first try using the translated bus address to + * derive a unique name. If it cannot, then it will prepend names from + * parent nodes until a unique name can be derived. */ void of_device_make_bus_id(struct device *dev) { - static atomic_t bus_no_reg_magic; struct device_node *node = dev->of_node; const __be32 *reg; u64 addr; - const __be32 *addrp; - int magic; -#ifdef CONFIG_PPC_DCR - /* - * If it's a DCR based device, use 'd' for native DCRs - * and 'D' for MMIO DCRs. - */ - reg = of_get_property(node, "dcr-reg", NULL); - if (reg) { -#ifdef CONFIG_PPC_DCR_NATIVE - dev_set_name(dev, "d%x.%s", *reg, node->name); -#else /* CONFIG_PPC_DCR_NATIVE */ - u64 addr = of_translate_dcr_address(node, *reg, NULL); - if (addr != OF_BAD_ADDR) { - dev_set_name(dev, "D%llx.%s", - (unsigned long long)addr, node->name); + /* Construct the name, using parent nodes if necessary to ensure uniqueness */ + while (node->parent) { + /* + * If the address can be translated, then that is as much + * uniqueness as we need. Make it the first component and return + */ + reg = of_get_property(node, "reg", NULL); + if (reg && (addr = of_translate_address(node, reg)) != OF_BAD_ADDR) { + dev_set_name(dev, dev_name(dev) ? "%llx.%s:%s" : "%llx.%s", + (unsigned long long)addr, node->name, + dev_name(dev)); return; } -#endif /* !CONFIG_PPC_DCR_NATIVE */ - } -#endif /* CONFIG_PPC_DCR */ - /* - * For MMIO, get the physical address - */ - reg = of_get_property(node, "reg", NULL); - if (reg) { - if (of_can_translate_address(node)) { - addr = of_translate_address(node, reg); - } else { - addrp = of_get_address(node, 0, NULL, NULL); - if (addrp) - addr = of_read_number(addrp, 1); - else - addr = OF_BAD_ADDR; - } - if (addr != OF_BAD_ADDR) { - dev_set_name(dev, "%llx.%s", - (unsigned long long)addr, node->name); - return; - } + /* format arguments only used if dev_name() resolves to NULL */ + dev_set_name(dev, dev_name(dev) ? "%s:%s" : "%s", + strrchr(node->full_name, '/') + 1, dev_name(dev)); + node = node->parent; } - - /* - * No BusID, use the node name and add a globally incremented - * counter (and pray...) - */ - magic = atomic_add_return(1, &bus_no_reg_magic); - dev_set_name(dev, "%s.%d", node->name, magic - 1); } /** @@ -149,9 +114,8 @@ struct platform_device *of_device_alloc(struct device_node *np, return NULL; /* count the io and irq resources */ - if (of_can_translate_address(np)) - while (of_address_to_resource(np, num_reg, &temp_res) == 0) - num_reg++; + while (of_address_to_resource(np, num_reg, &temp_res) == 0) + num_reg++; num_irq = of_irq_count(np); /* Populate the resource table */ @@ -174,9 +138,6 @@ struct platform_device *of_device_alloc(struct device_node *np, } dev->dev.of_node = of_node_get(np); -#if defined(CONFIG_MICROBLAZE) - dev->dev.dma_mask = &dev->archdata.dma_mask; -#endif dev->dev.parent = parent; if (bus_id) @@ -189,6 +150,60 @@ struct platform_device *of_device_alloc(struct device_node *np, EXPORT_SYMBOL(of_device_alloc); /** + * of_dma_configure - Setup DMA configuration + * @dev: Device to apply DMA configuration + * + * Try to get devices's DMA configuration from DT and update it + * accordingly. + * + * In case if platform code need to use own special DMA configuration,it + * can use Platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE event + * to fix up DMA configuration. + */ +static void of_dma_configure(struct platform_device *pdev) +{ + u64 dma_addr, paddr, size; + int ret; + struct device *dev = &pdev->dev; + + /* + * Set default dma-mask to 32 bit. Drivers are expected to setup + * the correct supported dma_mask. + */ + dev->coherent_dma_mask = DMA_BIT_MASK(32); + + /* + * Set it to coherent_dma_mask by default if the architecture + * code has not set it. + */ + if (!dev->dma_mask) + dev->dma_mask = &dev->coherent_dma_mask; + + /* + * if dma-coherent property exist, call arch hook to setup + * dma coherent operations. + */ + if (of_dma_is_coherent(dev->of_node)) { + set_arch_dma_coherent_ops(dev); + dev_dbg(dev, "device is dma coherent\n"); + } + + /* + * if dma-ranges property doesn't exist - just return else + * setup the dma offset + */ + ret = of_dma_get_range(dev->of_node, &dma_addr, &paddr, &size); + if (ret < 0) { + dev_dbg(dev, "no dma range information to setup\n"); + return; + } + + /* DMA ranges found. Calculate and set dma_pfn_offset */ + dev->dma_pfn_offset = PFN_DOWN(paddr - dma_addr); + dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", dev->dma_pfn_offset); +} + +/** * of_platform_device_create_pdata - Alloc, initialize and register an of_device * @np: pointer to node to create device for * @bus_id: name to assign device @@ -206,19 +221,15 @@ static struct platform_device *of_platform_device_create_pdata( { struct platform_device *dev; - if (!of_device_is_available(np)) + if (!of_device_is_available(np) || + of_node_test_and_set_flag(np, OF_POPULATED)) return NULL; dev = of_device_alloc(np, bus_id, parent); if (!dev) - return NULL; + goto err_clear_flag; -#if defined(CONFIG_MICROBLAZE) - dev->archdata.dma_mask = 0xffffffffUL; -#endif - dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); - if (!dev->dev.dma_mask) - dev->dev.dma_mask = &dev->dev.coherent_dma_mask; + of_dma_configure(dev); dev->dev.bus = &platform_bus_type; dev->dev.platform_data = platform_data; @@ -229,10 +240,14 @@ static struct platform_device *of_platform_device_create_pdata( if (of_device_add(dev) != 0) { platform_device_put(dev); - return NULL; + goto err_clear_flag; } return dev; + +err_clear_flag: + of_node_clear_flag(np, OF_POPULATED); + return NULL; } /** @@ -264,14 +279,15 @@ static struct amba_device *of_amba_device_create(struct device_node *node, pr_debug("Creating amba device %s\n", node->full_name); - if (!of_device_is_available(node)) + if (!of_device_is_available(node) || + of_node_test_and_set_flag(node, OF_POPULATED)) return NULL; dev = amba_device_alloc(NULL, 0, 0); if (!dev) { pr_err("%s(): amba_device_alloc() failed for %s\n", __func__, node->full_name); - return NULL; + goto err_clear_flag; } /* setup generic device info */ @@ -311,6 +327,8 @@ static struct amba_device *of_amba_device_create(struct device_node *node, err_free: amba_device_put(dev); +err_clear_flag: + of_node_clear_flag(node, OF_POPULATED); return NULL; } #else /* CONFIG_ARM_AMBA */ @@ -487,4 +505,60 @@ int of_platform_populate(struct device_node *root, return rc; } EXPORT_SYMBOL_GPL(of_platform_populate); + +static int of_platform_device_destroy(struct device *dev, void *data) +{ + bool *children_left = data; + + /* Do not touch devices not populated from the device tree */ + if (!dev->of_node || !of_node_check_flag(dev->of_node, OF_POPULATED)) { + *children_left = true; + return 0; + } + + /* Recurse, but don't touch this device if it has any children left */ + if (of_platform_depopulate(dev) != 0) { + *children_left = true; + return 0; + } + + if (dev->bus == &platform_bus_type) + platform_device_unregister(to_platform_device(dev)); +#ifdef CONFIG_ARM_AMBA + else if (dev->bus == &amba_bustype) + amba_device_unregister(to_amba_device(dev)); +#endif + else { + *children_left = true; + return 0; + } + + of_node_clear_flag(dev->of_node, OF_POPULATED); + + return 0; +} + +/** + * of_platform_depopulate() - Remove devices populated from device tree + * @parent: device which childred will be removed + * + * Complementary to of_platform_populate(), this function removes children + * of the given device (and, recurrently, their children) that have been + * created from their respective device tree nodes (and only those, + * leaving others - eg. manually created - unharmed). + * + * Returns 0 when all children devices have been removed or + * -EBUSY when some children remained. + */ +int of_platform_depopulate(struct device *parent) +{ + bool children_left = false; + + device_for_each_child(parent, &children_left, + of_platform_device_destroy); + + return children_left ? -EBUSY : 0; +} +EXPORT_SYMBOL_GPL(of_platform_depopulate); + #endif /* CONFIG_OF_ADDRESS */ |