1 files changed, 72 insertions, 13 deletions

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 3b7ffd0234e9..be7a7d332332 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -1626,12 +1626,6 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
 			goto free_regulators;
 		}
 
-		ret = regulator_enable(reg);
-		if (ret < 0) {
-			regulator_put(reg);
-			goto free_regulators;
-		}
-
 		opp_table->regulators[i] = reg;
 	}
 
@@ -1645,10 +1639,8 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
 	return opp_table;
 
 free_regulators:
-	while (i--) {
-		regulator_disable(opp_table->regulators[i]);
-		regulator_put(opp_table->regulators[i]);
-	}
+	while (i != 0)
+		regulator_put(opp_table->regulators[--i]);
 
 	kfree(opp_table->regulators);
 	opp_table->regulators = NULL;
@@ -1674,10 +1666,8 @@ void dev_pm_opp_put_regulators(struct opp_table *opp_table)
 	/* Make sure there are no concurrent readers while updating opp_table */
 	WARN_ON(!list_empty(&opp_table->opp_list));
 
-	for (i = opp_table->regulator_count - 1; i >= 0; i--) {
-		regulator_disable(opp_table->regulators[i]);
+	for (i = opp_table->regulator_count - 1; i >= 0; i--)
 		regulator_put(opp_table->regulators[i]);
-	}
 
 	_free_set_opp_data(opp_table);
 
@@ -2113,6 +2103,75 @@ put_table:
 }
 
 /**
+ * dev_pm_opp_adjust_voltage() - helper to change the voltage of an OPP
+ * @dev:		device for which we do this operation
+ * @freq:		OPP frequency to adjust voltage of
+ * @u_volt:		new OPP target voltage
+ * @u_volt_min:		new OPP min voltage
+ * @u_volt_max:		new OPP max voltage
+ *
+ * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the
+ * copy operation, returns 0 if no modifcation was done OR modification was
+ * successful.
+ */
+int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
+			      unsigned long u_volt, unsigned long u_volt_min,
+			      unsigned long u_volt_max)
+
+{
+	struct opp_table *opp_table;
+	struct dev_pm_opp *tmp_opp, *opp = ERR_PTR(-ENODEV);
+	int r = 0;
+
+	/* Find the opp_table */
+	opp_table = _find_opp_table(dev);
+	if (IS_ERR(opp_table)) {
+		r = PTR_ERR(opp_table);
+		dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r);
+		return r;
+	}
+
+	mutex_lock(&opp_table->lock);
+
+	/* Do we have the frequency? */
+	list_for_each_entry(tmp_opp, &opp_table->opp_list, node) {
+		if (tmp_opp->rate == freq) {
+			opp = tmp_opp;
+			break;
+		}
+	}
+
+	if (IS_ERR(opp)) {
+		r = PTR_ERR(opp);
+		goto adjust_unlock;
+	}
+
+	/* Is update really needed? */
+	if (opp->supplies->u_volt == u_volt)
+		goto adjust_unlock;
+
+	opp->supplies->u_volt = u_volt;
+	opp->supplies->u_volt_min = u_volt_min;
+	opp->supplies->u_volt_max = u_volt_max;
+
+	dev_pm_opp_get(opp);
+	mutex_unlock(&opp_table->lock);
+
+	/* Notify the voltage change of the OPP */
+	blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADJUST_VOLTAGE,
+				     opp);
+
+	dev_pm_opp_put(opp);
+	goto adjust_put_table;
+
+adjust_unlock:
+	mutex_unlock(&opp_table->lock);
+adjust_put_table:
+	dev_pm_opp_put_opp_table(opp_table);
+	return r;
+}
+
+/**
  * dev_pm_opp_enable() - Enable a specific OPP
  * @dev:	device for which we do this operation
  * @freq:	OPP frequency to enable