diff options
Diffstat (limited to 'drivers/pci')
29 files changed, 791 insertions, 1029 deletions
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 5ea5bc70cb82..7a1d6d512837 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -1,10 +1,14 @@ # # PCI configuration # +config ARCH_SUPPORTS_MSI + bool + default n + config PCI_MSI bool "Message Signaled Interrupts (MSI and MSI-X)" depends on PCI - depends on (X86_LOCAL_APIC && X86_IO_APIC) || IA64 || SPARC64 + depends on ARCH_SUPPORTS_MSI help This allows device drivers to enable MSI (Message Signaled Interrupts). Message Signaled Interrupts enable a device to @@ -17,31 +21,6 @@ config PCI_MSI If you don't know what to do here, say N. -config PCI_MULTITHREAD_PROBE - bool "PCI Multi-threaded probe (EXPERIMENTAL)" - depends on PCI && EXPERIMENTAL && BROKEN - help - Say Y here if you want the PCI core to spawn a new thread for - every PCI device that is probed. This can cause a huge - speedup in boot times on multiprocessor machines, and even a - smaller speedup on single processor machines. - - But it can also cause lots of bad things to happen. A number - of PCI drivers cannot properly handle running in this way, - some will just not work properly at all, while others might - decide to blow up power supplies with a huge load all at once, - so use this option at your own risk. - - It is very unwise to use this option if you are not using a - boot process that can handle devices being created in any - order. A program that can create persistent block and network - device names (like udev) is a good idea if you wish to use - this option. - - Again, use this option at your own risk, you have been warned! - - When in doubt, say N. - config PCI_DEBUG bool "PCI Debugging" depends on PCI && DEBUG_KERNEL diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index aadaa3c8096b..9e5ea074ad20 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -77,7 +77,7 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, * This adds a single pci device to the global * device list and adds sysfs and procfs entries */ -int __devinit pci_bus_add_device(struct pci_dev *dev) +int pci_bus_add_device(struct pci_dev *dev) { int retval; retval = device_add(&dev->dev); @@ -105,7 +105,7 @@ int __devinit pci_bus_add_device(struct pci_dev *dev) * * Call hotplug for each new devices. */ -void __devinit pci_bus_add_devices(struct pci_bus *bus) +void pci_bus_add_devices(struct pci_bus *bus) { struct pci_dev *dev; int retval; diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index be92695a7833..63d62752fb91 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -2,9 +2,7 @@ # PCI Hotplug support # -menu "PCI Hotplug Support" - -config HOTPLUG_PCI +menuconfig HOTPLUG_PCI tristate "Support for PCI Hotplug (EXPERIMENTAL)" depends on PCI && EXPERIMENTAL && HOTPLUG ---help--- @@ -17,9 +15,10 @@ config HOTPLUG_PCI When in doubt, say N. +if HOTPLUG_PCI + config HOTPLUG_PCI_FAKE tristate "Fake PCI Hotplug driver" - depends on HOTPLUG_PCI help Say Y here if you want to use the fake PCI hotplug driver. It can be used to simulate PCI hotplug events if even if your system is @@ -42,7 +41,7 @@ config HOTPLUG_PCI_FAKE config HOTPLUG_PCI_COMPAQ tristate "Compaq PCI Hotplug driver" - depends on HOTPLUG_PCI && X86 && PCI_BIOS + depends on X86 && PCI_BIOS help Say Y here if you have a motherboard with a Compaq PCI Hotplug controller. @@ -64,7 +63,7 @@ config HOTPLUG_PCI_COMPAQ_NVRAM config HOTPLUG_PCI_IBM tristate "IBM PCI Hotplug driver" - depends on HOTPLUG_PCI && X86_IO_APIC && X86 && PCI_BIOS + depends on X86_IO_APIC && X86 && PCI_BIOS help Say Y here if you have a motherboard with a IBM PCI Hotplug controller. @@ -76,7 +75,6 @@ config HOTPLUG_PCI_IBM config HOTPLUG_PCI_ACPI tristate "ACPI PCI Hotplug driver" - depends on HOTPLUG_PCI depends on (!ACPI_DOCK && ACPI) || (ACPI_DOCK) help Say Y here if you have a system that supports PCI Hotplug using @@ -101,7 +99,6 @@ config HOTPLUG_PCI_ACPI_IBM config HOTPLUG_PCI_CPCI bool "CompactPCI Hotplug driver" - depends on HOTPLUG_PCI help Say Y here if you have a CompactPCI system card with CompactPCI hotswap support per the PICMG 2.1 specification. @@ -110,7 +107,7 @@ config HOTPLUG_PCI_CPCI config HOTPLUG_PCI_CPCI_ZT5550 tristate "Ziatech ZT5550 CompactPCI Hotplug driver" - depends on HOTPLUG_PCI && HOTPLUG_PCI_CPCI && X86 + depends on HOTPLUG_PCI_CPCI && X86 help Say Y here if you have an Performance Technologies (formerly Intel, formerly just Ziatech) Ziatech ZT5550 CompactPCI system card. @@ -122,7 +119,7 @@ config HOTPLUG_PCI_CPCI_ZT5550 config HOTPLUG_PCI_CPCI_GENERIC tristate "Generic port I/O CompactPCI Hotplug driver" - depends on HOTPLUG_PCI && HOTPLUG_PCI_CPCI && X86 + depends on HOTPLUG_PCI_CPCI && X86 help Say Y here if you have a CompactPCI system card that exposes the #ENUM hotswap signal as a bit in a system register that can be read through @@ -135,7 +132,6 @@ config HOTPLUG_PCI_CPCI_GENERIC config HOTPLUG_PCI_SHPC tristate "SHPC PCI Hotplug driver" - depends on HOTPLUG_PCI help Say Y here if you have a motherboard with a SHPC PCI Hotplug controller. @@ -147,7 +143,7 @@ config HOTPLUG_PCI_SHPC config HOTPLUG_PCI_RPA tristate "RPA PCI Hotplug driver" - depends on HOTPLUG_PCI && PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE + depends on PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE help Say Y here if you have a RPA system that supports PCI Hotplug. @@ -170,12 +166,11 @@ config HOTPLUG_PCI_RPA_DLPAR config HOTPLUG_PCI_SGI tristate "SGI PCI Hotplug Support" - depends on HOTPLUG_PCI && (IA64_SGI_SN2 || IA64_GENERIC) + depends on IA64_SGI_SN2 || IA64_GENERIC help Say Y here if you want to use the SGI Altix Hotplug Driver for PCI devices. When in doubt, say N. -endmenu - +endif # HOTPLUG_PCI diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c index 7f03881a8b68..e7322c25d377 100644 --- a/drivers/pci/hotplug/acpiphp_ibm.c +++ b/drivers/pci/hotplug/acpiphp_ibm.c @@ -424,7 +424,7 @@ static int __init ibm_acpiphp_init(void) int retval = 0; acpi_status status; struct acpi_device *device; - struct kobject *sysdir = &pci_hotplug_slots_subsys.kset.kobj; + struct kobject *sysdir = &pci_hotplug_slots_subsys.kobj; dbg("%s\n", __FUNCTION__); @@ -471,7 +471,7 @@ init_return: static void __exit ibm_acpiphp_exit(void) { acpi_status status; - struct kobject *sysdir = &pci_hotplug_slots_subsys.kset.kobj; + struct kobject *sysdir = &pci_hotplug_slots_subsys.kobj; dbg("%s\n", __FUNCTION__); diff --git a/drivers/pci/hotplug/cpcihp_zt5550.c b/drivers/pci/hotplug/cpcihp_zt5550.c index 1c12e9171097..41f6a8d79c81 100644 --- a/drivers/pci/hotplug/cpcihp_zt5550.c +++ b/drivers/pci/hotplug/cpcihp_zt5550.c @@ -296,13 +296,17 @@ static struct pci_driver zt5550_hc_driver = { static int __init zt5550_init(void) { struct resource* r; + int rc; info(DRIVER_DESC " version: " DRIVER_VERSION); r = request_region(ENUM_PORT, 1, "#ENUM hotswap signal register"); if(!r) return -EBUSY; - return pci_register_driver(&zt5550_hc_driver); + rc = pci_register_driver(&zt5550_hc_driver); + if(rc < 0) + release_region(ENUM_PORT, 1); + return rc; } static void __exit diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c index e27907c91d92..027f6865d7e3 100644 --- a/drivers/pci/hotplug/fakephp.c +++ b/drivers/pci/hotplug/fakephp.c @@ -238,7 +238,7 @@ static void pci_rescan_bus(const struct pci_bus *bus) { unsigned int devfn; struct pci_dev *dev; - dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL); + dev = alloc_pci_dev(); if (!dev) return; diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index f5d632e72323..63f3bd1eecc4 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -62,7 +62,7 @@ static int debug; static LIST_HEAD(pci_hotplug_slot_list); -struct subsystem pci_hotplug_slots_subsys; +struct kset pci_hotplug_slots_subsys; static ssize_t hotplug_slot_attr_show(struct kobject *kobj, struct attribute *attr, char *buf) @@ -764,7 +764,7 @@ static int __init pci_hotplug_init (void) { int result; - kset_set_kset_s(&pci_hotplug_slots_subsys, pci_bus_type.subsys); + kobj_set_kset_s(&pci_hotplug_slots_subsys, pci_bus_type.subsys); result = subsystem_register(&pci_hotplug_slots_subsys); if (result) { err("Register subsys with error %d\n", result); diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index d19fcae8a7c0..ccc57627201e 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -43,6 +43,7 @@ extern int pciehp_poll_mode; extern int pciehp_poll_time; extern int pciehp_debug; extern int pciehp_force; +extern struct workqueue_struct *pciehp_wq; #define dbg(format, arg...) \ do { \ @@ -70,14 +71,16 @@ struct slot { struct list_head slot_list; char name[SLOT_NAME_SIZE]; unsigned long last_emi_toggle; + struct delayed_work work; /* work for button event */ + struct mutex lock; }; struct event_info { u32 event_type; - u8 hp_slot; + struct slot *p_slot; + struct work_struct work; }; -#define MAX_EVENTS 10 struct controller { struct controller *next; struct mutex crit_sect; /* critical section mutex */ @@ -86,11 +89,9 @@ struct controller { int slot_num_inc; /* 1 or -1 */ struct pci_dev *pci_dev; struct list_head slot_list; - struct event_info event_queue[MAX_EVENTS]; struct slot *slot; struct hpc_ops *hpc_ops; wait_queue_head_t queue; /* sleep & wake process */ - u8 next_event; u8 bus; u8 device; u8 function; @@ -149,21 +150,17 @@ struct controller { #define HP_SUPR_RM(cap) (cap & HP_SUPR_RM_SUP) #define EMI(cap) (cap & EMI_PRSN) -extern int pciehp_event_start_thread(void); -extern void pciehp_event_stop_thread(void); -extern int pciehp_enable_slot(struct slot *slot); -extern int pciehp_disable_slot(struct slot *slot); +extern int pciehp_sysfs_enable_slot(struct slot *slot); +extern int pciehp_sysfs_disable_slot(struct slot *slot); extern u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl); extern u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl); extern u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl); extern u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl); extern int pciehp_configure_device(struct slot *p_slot); extern int pciehp_unconfigure_device(struct slot *p_slot); +extern void pciehp_queue_pushbutton_work(struct work_struct *work); int pcie_init(struct controller *ctrl, struct pcie_device *dev); -/* Global variables */ -extern struct controller *pciehp_ctrl_list; - static inline struct slot *pciehp_find_slot(struct controller *ctrl, u8 device) { struct slot *slot; diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index a92eda6e02f6..e5d3f0b4f45a 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -41,7 +41,7 @@ int pciehp_debug; int pciehp_poll_mode; int pciehp_poll_time; int pciehp_force; -struct controller *pciehp_ctrl_list; +struct workqueue_struct *pciehp_wq; #define DRIVER_VERSION "0.4" #define DRIVER_AUTHOR "Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>, Dely Sy <dely.l.sy@intel.com>" @@ -62,7 +62,6 @@ MODULE_PARM_DESC(pciehp_force, "Force pciehp, even if _OSC and OSHP are missing" #define PCIE_MODULE_NAME "pciehp" -static int pcie_start_thread (void); static int set_attention_status (struct hotplug_slot *slot, u8 value); static int enable_slot (struct hotplug_slot *slot); static int disable_slot (struct hotplug_slot *slot); @@ -229,6 +228,8 @@ static int init_slots(struct controller *ctrl) slot->device = ctrl->slot_device_offset + i; slot->hpc_ops = ctrl->hpc_ops; slot->number = ctrl->first_slot; + mutex_init(&slot->lock); + INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work); /* register this slot with the hotplug pci core */ hotplug_slot->private = slot; @@ -286,6 +287,9 @@ static void cleanup_slots(struct controller *ctrl) if (EMI(ctrl->ctrlcap)) sysfs_remove_file(&slot->hotplug_slot->kobj, &hotplug_slot_attr_lock.attr); + cancel_delayed_work(&slot->work); + flush_scheduled_work(); + flush_workqueue(pciehp_wq); pci_hp_deregister(slot->hotplug_slot); } } @@ -314,7 +318,7 @@ static int enable_slot(struct hotplug_slot *hotplug_slot) dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name); - return pciehp_enable_slot(slot); + return pciehp_sysfs_enable_slot(slot); } @@ -324,7 +328,7 @@ static int disable_slot(struct hotplug_slot *hotplug_slot) dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name); - return pciehp_disable_slot(slot); + return pciehp_sysfs_disable_slot(slot); } static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) @@ -466,17 +470,6 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); - /* Finish setting up the hot plug ctrl device */ - ctrl->next_event = 0; - - if (!pciehp_ctrl_list) { - pciehp_ctrl_list = ctrl; - ctrl->next = NULL; - } else { - ctrl->next = pciehp_ctrl_list; - pciehp_ctrl_list = ctrl; - } - t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */ if ((POWER_CTRL(ctrl->ctrlcap)) && !value) { rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/ @@ -496,48 +489,14 @@ err_out_none: return -ENODEV; } - -static int pcie_start_thread(void) +static void pciehp_remove (struct pcie_device *dev) { - int retval = 0; - - dbg("Initialize + Start the notification/polling mechanism \n"); - - retval = pciehp_event_start_thread(); - if (retval) { - dbg("pciehp_event_start_thread() failed\n"); - return retval; - } - - return retval; -} - -static void __exit unload_pciehpd(void) -{ - struct controller *ctrl; - struct controller *tctrl; - - ctrl = pciehp_ctrl_list; - - while (ctrl) { - cleanup_slots(ctrl); + struct pci_dev *pdev = dev->port; + struct controller *ctrl = pci_get_drvdata(pdev); - ctrl->hpc_ops->release_ctlr(ctrl); - - tctrl = ctrl; - ctrl = ctrl->next; - - kfree(tctrl); - } - - /* Stop the notification mechanism */ - pciehp_event_stop_thread(); - -} - -static void pciehp_remove (struct pcie_device *device) -{ - /* XXX - Needs to be adapted to device driver model */ + cleanup_slots(ctrl); + ctrl->hpc_ops->release_ctlr(ctrl); + kfree(ctrl); } #ifdef CONFIG_PM @@ -585,31 +544,18 @@ static int __init pcied_init(void) pciehp_poll_mode = 1; #endif - retval = pcie_start_thread(); - if (retval) - goto error_hpc_init; - retval = pcie_port_service_register(&hpdriver_portdrv); dbg("pcie_port_service_register = %d\n", retval); info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); if (retval) dbg("%s: Failure to register service\n", __FUNCTION__); - -error_hpc_init: - if (retval) { - pciehp_event_stop_thread(); - }; - return retval; } static void __exit pcied_cleanup(void) { dbg("unload_pciehpd()\n"); - unload_pciehpd(); - pcie_port_service_unregister(&hpdriver_portdrv); - info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n"); } diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 4283ef56dbd9..7f22caa70178 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -32,92 +32,61 @@ #include <linux/types.h> #include <linux/smp_lock.h> #include <linux/pci.h> +#include <linux/workqueue.h> #include "../pci.h" #include "pciehp.h" -static void interrupt_event_handler(struct controller *ctrl); +static void interrupt_event_handler(struct work_struct *work); +static int pciehp_enable_slot(struct slot *p_slot); +static int pciehp_disable_slot(struct slot *p_slot); -static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */ -static struct semaphore event_exit; /* guard ensure thread has exited before calling it quits */ -static int event_finished; -static unsigned long pushbutton_pending; /* = 0 */ -static unsigned long surprise_rm_pending; /* = 0 */ - -static inline char *slot_name(struct slot *p_slot) +static int queue_interrupt_event(struct slot *p_slot, u32 event_type) { - return p_slot->hotplug_slot->name; + struct event_info *info; + + info = kmalloc(sizeof(*info), GFP_ATOMIC); + if (!info) + return -ENOMEM; + + info->event_type = event_type; + info->p_slot = p_slot; + INIT_WORK(&info->work, interrupt_event_handler); + + schedule_work(&info->work); + + return 0; } u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl) { struct slot *p_slot; - u8 rc = 0; - u8 getstatus; - struct event_info *taskInfo; + u32 event_type; /* Attention Button Change */ dbg("pciehp: Attention button interrupt received.\n"); - - /* This is the structure that tells the worker thread what to do */ - taskInfo = &(ctrl->event_queue[ctrl->next_event]); - p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - - p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); - - ctrl->next_event = (ctrl->next_event + 1) % MAX_EVENTS; - taskInfo->hp_slot = hp_slot; - rc++; + p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); /* * Button pressed - See if need to TAKE ACTION!!! */ - info("Button pressed on Slot(%s)\n", slot_name(p_slot)); - taskInfo->event_type = INT_BUTTON_PRESS; - - if ((p_slot->state == BLINKINGON_STATE) - || (p_slot->state == BLINKINGOFF_STATE)) { - /* Cancel if we are still blinking; this means that we press the - * attention again before the 5 sec. limit expires to cancel hot-add - * or hot-remove - */ - taskInfo->event_type = INT_BUTTON_CANCEL; - info("Button cancel on Slot(%s)\n", slot_name(p_slot)); - } else if ((p_slot->state == POWERON_STATE) - || (p_slot->state == POWEROFF_STATE)) { - /* Ignore if the slot is on power-on or power-off state; this - * means that the previous attention button action to hot-add or - * hot-remove is undergoing - */ - taskInfo->event_type = INT_BUTTON_IGNORE; - info("Button ignore on Slot(%s)\n", slot_name(p_slot)); - } + info("Button pressed on Slot(%s)\n", p_slot->name); + event_type = INT_BUTTON_PRESS; - if (rc) - up(&event_semaphore); /* signal event thread that new event is posted */ + queue_interrupt_event(p_slot, event_type); return 0; - } u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl) { struct slot *p_slot; - u8 rc = 0; u8 getstatus; - struct event_info *taskInfo; + u32 event_type; /* Switch Change */ dbg("pciehp: Switch interrupt received.\n"); - /* This is the structure that tells the worker thread - * what to do - */ - taskInfo = &(ctrl->event_queue[ctrl->next_event]); - ctrl->next_event = (ctrl->next_event + 1) % MAX_EVENTS; - taskInfo->hp_slot = hp_slot; - - rc++; p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); @@ -125,39 +94,30 @@ u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl) /* * Switch opened */ - info("Latch open on Slot(%s)\n", slot_name(p_slot)); - taskInfo->event_type = INT_SWITCH_OPEN; + info("Latch open on Slot(%s)\n", p_slot->name); + event_type = INT_SWITCH_OPEN; } else { /* * Switch closed */ - info("Latch close on Slot(%s)\n", slot_name(p_slot)); - taskInfo->event_type = INT_SWITCH_CLOSE; + info("Latch close on Slot(%s)\n", p_slot->name); + event_type = INT_SWITCH_CLOSE; } - if (rc) - up(&event_semaphore); /* signal event thread that new event is posted */ + queue_interrupt_event(p_slot, event_type); - return rc; + return 1; } u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl) { struct slot *p_slot; - u8 presence_save, rc = 0; - struct event_info *taskInfo; + u32 event_type; + u8 presence_save; /* Presence Change */ dbg("pciehp: Presence/Notify input change.\n"); - /* This is the structure that tells the worker thread - * what to do - */ - taskInfo = &(ctrl->event_queue[ctrl->next_event]); - ctrl->next_event = (ctrl->next_event + 1) % MAX_EVENTS; - taskInfo->hp_slot = hp_slot; - - rc++; p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); /* Switch is open, assume a presence change @@ -168,59 +128,49 @@ u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl) /* * Card Present */ - info("Card present on Slot(%s)\n", slot_name(p_slot)); - taskInfo->event_type = INT_PRESENCE_ON; + info("Card present on Slot(%s)\n", p_slot->name); + event_type = INT_PRESENCE_ON; } else { /* * Not Present */ - info("Card not present on Slot(%s)\n", slot_name(p_slot)); - taskInfo->event_type = INT_PRESENCE_OFF; + info("Card not present on Slot(%s)\n", p_slot->name); + event_type = INT_PRESENCE_OFF; } - if (rc) - up(&event_semaphore); /* signal event thread that new event is posted */ + queue_interrupt_event(p_slot, event_type); - return rc; + return 1; } u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl) { struct slot *p_slot; - u8 rc = 0; - struct event_info *taskInfo; + u32 event_type; /* power fault */ dbg("pciehp: Power fault interrupt received.\n"); - /* this is the structure that tells the worker thread - * what to do - */ - taskInfo = &(ctrl->event_queue[ctrl->next_event]); - ctrl->next_event = (ctrl->next_event + 1) % MAX_EVENTS; - taskInfo->hp_slot = hp_slot; - - rc++; p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) { /* * power fault Cleared */ - info("Power fault cleared on Slot(%s)\n", slot_name(p_slot)); - taskInfo->event_type = INT_POWER_FAULT_CLEAR; + info("Power fault cleared on Slot(%s)\n", p_slot->name); + event_type = INT_POWER_FAULT_CLEAR; } else { /* * power fault */ - info("Power fault on Slot(%s)\n", slot_name(p_slot)); - taskInfo->event_type = INT_POWER_FAULT; + info("Power fault on Slot(%s)\n", p_slot->name); + event_type = INT_POWER_FAULT; info("power fault bit %x set\n", hp_slot); } - if (rc) - up(&event_semaphore); /* signal event thread that new event is posted */ - return rc; + queue_interrupt_event(p_slot, event_type); + + return 1; } /* The following routines constitute the bulk of the @@ -357,13 +307,10 @@ static int remove_board(struct slot *p_slot) return 0; } - -static void pushbutton_helper_thread(unsigned long data) -{ - pushbutton_pending = data; - - up(&event_semaphore); -} +struct power_work_info { + struct slot *p_slot; + struct work_struct work; +}; /** * pciehp_pushbutton_thread @@ -372,276 +319,214 @@ static void pushbutton_helper_thread(unsigned long data) * Handles all pending events and exits. * */ -static void pciehp_pushbutton_thread(unsigned long slot) +static void pciehp_power_thread(struct work_struct *work) { - struct slot *p_slot = (struct slot *) slot; - u8 getstatus; - - pushbutton_pending = 0; - - if (!p_slot) { - dbg("%s: Error! slot NULL\n", __FUNCTION__); - return; - } - - p_slot->hpc_ops->get_power_status(p_slot, &getstatus); - if (getstatus) { - p_slot->state = POWEROFF_STATE; - dbg("%s: disabling bus:device(%x:%x)\n", __FUNCTION__, - p_slot->bus, p_slot->device); - + struct power_work_info *info = + container_of(work, struct power_work_info, work); + struct slot *p_slot = info->p_slot; + + mutex_lock(&p_slot->lock); + switch (p_slot->state) { + case POWEROFF_STATE: + mutex_unlock(&p_slot->lock); + dbg("%s: disabling bus:device(%x:%x)\n", + __FUNCTION__, p_slot->bus, p_slot->device); pciehp_disable_slot(p_slot); + mutex_lock(&p_slot->lock); p_slot->state = STATIC_STATE; - } else { - p_slot->state = POWERON_STATE; - dbg("%s: adding bus:device(%x:%x)\n", __FUNCTION__, - p_slot->bus, p_slot->device); - + break; + case POWERON_STATE: + mutex_unlock(&p_slot->lock); if (pciehp_enable_slot(p_slot) && PWR_LED(p_slot->ctrl->ctrlcap)) p_slot->hpc_ops->green_led_off(p_slot); - + mutex_lock(&p_slot->lock); p_slot->state = STATIC_STATE; + break; + default: + break; } + mutex_unlock(&p_slot->lock); - return; + kfree(info); } -/** - * pciehp_surprise_rm_thread - * - * Scheduled procedure to handle blocking stuff for the surprise removal - * Handles all pending events and exits. - * - */ -static void pciehp_surprise_rm_thread(unsigned long slot) +void pciehp_queue_pushbutton_work(struct work_struct *work) { - struct slot *p_slot = (struct slot *) slot; - u8 getstatus; - - surprise_rm_pending = 0; + struct slot *p_slot = container_of(work, struct slot, work.work); + struct power_work_info *info; - if (!p_slot) { - dbg("%s: Error! slot NULL\n", __FUNCTION__); + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + err("%s: Cannot allocate memory\n", __FUNCTION__); return; } + info->p_slot = p_slot; + INIT_WORK(&info->work, pciehp_power_thread); - p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); - if (!getstatus) { + mutex_lock(&p_slot->lock); + switch (p_slot->state) { + case BLINKINGOFF_STATE: p_slot->state = POWEROFF_STATE; - dbg("%s: removing bus:device(%x:%x)\n", - __FUNCTION__, p_slot->bus, p_slot->device); - - pciehp_disable_slot(p_slot); - p_slot->state = STATIC_STATE; - } else { + break; + case BLINKINGON_STATE: p_slot->state = POWERON_STATE; - dbg("%s: adding bus:device(%x:%x)\n", - __FUNCTION__, p_slot->bus, p_slot->device); - - if (pciehp_enable_slot(p_slot) && - PWR_LED(p_slot->ctrl->ctrlcap)) - p_slot->hpc_ops->green_led_off(p_slot); - - p_slot->state = STATIC_STATE; + break; + default: + goto out; } - - return; + queue_work(pciehp_wq, &info->work); + out: + mutex_unlock(&p_slot->lock); } - - -/* this is the main worker thread */ -static int event_thread(void* data) -{ - struct controller *ctrl; - lock_kernel(); - daemonize("pciehpd_event"); - - unlock_kernel(); - - while (1) { - dbg("!!!!event_thread sleeping\n"); - down_interruptible (&event_semaphore); - dbg("event_thread woken finished = %d\n", event_finished); - if (event_finished || signal_pending(current)) - break; - /* Do stuff here */ - if (pushbutton_pending) - pciehp_pushbutton_thread(pushbutton_pending); - else if (surprise_rm_pending) - pciehp_surprise_rm_thread(surprise_rm_pending); - else - for (ctrl = pciehp_ctrl_list; ctrl; ctrl=ctrl->next) - interrupt_event_handler(ctrl); - } - dbg("event_thread signals exit\n"); - up(&event_exit); - return 0; -} - -int pciehp_event_start_thread(void) -{ - int pid; - - /* initialize our semaphores */ - init_MUTEX_LOCKED(&event_exit); - event_finished=0; - - init_MUTEX_LOCKED(&event_semaphore); - pid = kernel_thread(event_thread, NULL, 0); - - if (pid < 0) { - err ("Can't start up our event thread\n"); - return -1; - } - return 0; -} - - -void pciehp_event_stop_thread(void) -{ - event_finished = 1; - up(&event_semaphore); - down(&event_exit); -} - - static int update_slot_info(struct slot *slot) { struct hotplug_slot_info *info; - /* char buffer[SLOT_NAME_SIZE]; */ int result; - info = kmalloc(sizeof(struct hotplug_slot_info), GFP_KERNEL); + info = kmalloc(sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; - /* make_slot_name (&buffer[0], SLOT_NAME_SIZE, slot); */ - slot->hpc_ops->get_power_status(slot, &(info->power_status)); slot->hpc_ops->get_attention_status(slot, &(info->attention_status)); slot->hpc_ops->get_latch_status(slot, &(info->latch_status)); slot->hpc_ops->get_adapter_status(slot, &(info->adapter_status)); - /* result = pci_hp_change_slot_info(buffer, info); */ result = pci_hp_change_slot_info(slot->hotplug_slot, info); kfree (info); return result; } -static void interrupt_event_handler(struct controller *ctrl) +/* + * Note: This function must be called with slot->lock held + */ +static void handle_button_press_event(struct slot *p_slot) { - int loop = 0; - int change = 1; - u8 hp_slot; + struct controller *ctrl = p_slot->ctrl; u8 getstatus; - struct slot *p_slot; - while (change) { - change = 0; - - for (loop = 0; loop < MAX_EVENTS; loop++) { - if (ctrl->event_queue[loop].event_type != 0) { - hp_slot = ctrl->event_queue[loop].hp_slot; - - p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - - if (ctrl->event_queue[loop].event_type == INT_BUTTON_CANCEL) { - dbg("button cancel\n"); - del_timer(&p_slot->task_event); - - switch (p_slot->state) { - case BLINKINGOFF_STATE: - if (PWR_LED(ctrl->ctrlcap)) - p_slot->hpc_ops->green_led_on(p_slot); - - if (ATTN_LED(ctrl->ctrlcap)) - p_slot->hpc_ops->set_attention_status(p_slot, 0); - break; - case BLINKINGON_STATE: - if (PWR_LED(ctrl->ctrlcap)) - p_slot->hpc_ops->green_led_off(p_slot); - - if (ATTN_LED(ctrl->ctrlcap)) - p_slot->hpc_ops->set_attention_status(p_slot, 0); - break; - default: - warn("Not a valid state\n"); - return; - } - info("PCI slot #%s - action canceled due to button press.\n", slot_name(p_slot)); - p_slot->state = STATIC_STATE; - } - /* ***********Button Pressed (No action on 1st press...) */ - else if (ctrl->event_queue[loop].event_type == INT_BUTTON_PRESS) { - - if (ATTN_BUTTN(ctrl->ctrlcap)) { - dbg("Button pressed\n"); - p_slot->hpc_ops->get_power_status(p_slot, &getstatus); - if (getstatus) { - /* slot is on */ - dbg("slot is on\n"); - p_slot->state = BLINKINGOFF_STATE; - info("PCI slot #%s - powering off due to button press.\n", slot_name(p_slot)); - } else { - /* slot is off */ - dbg("slot is off\n"); - p_slot->state = BLINKINGON_STATE; - info("PCI slot #%s - powering on due to button press.\n", slot_name(p_slot)); - } - - /* blink green LED and turn off amber */ - if (PWR_LED(ctrl->ctrlcap)) - p_slot->hpc_ops->green_led_blink(p_slot); - - if (ATTN_LED(ctrl->ctrlcap)) - p_slot->hpc_ops->set_attention_status(p_slot, 0); - - init_timer(&p_slot->task_event); - p_slot->task_event.expires = jiffies + 5 * HZ; /* 5 second delay */ - p_slot->task_event.function = (void (*)(unsigned long)) pushbutton_helper_thread; - p_slot->task_event.data = (unsigned long) p_slot; - - add_timer(&p_slot->task_event); - } - } - /***********POWER FAULT********************/ - else if (ctrl->event_queue[loop].event_type == INT_POWER_FAULT) { - if (POWER_CTRL(ctrl->ctrlcap)) { - dbg("power fault\n"); - if (ATTN_LED(ctrl->ctrlcap)) - p_slot->hpc_ops->set_attention_status(p_slot, 1); - - if (PWR_LED(ctrl->ctrlcap)) - p_slot->hpc_ops->green_led_off(p_slot); - } - } - /***********SURPRISE REMOVAL********************/ - else if ((ctrl->event_queue[loop].event_type == INT_PRESENCE_ON) || - (ctrl->event_queue[loop].event_type == INT_PRESENCE_OFF)) { - if (HP_SUPR_RM(ctrl->ctrlcap)) { - dbg("Surprise Removal\n"); - if (p_slot) { - surprise_rm_pending = (unsigned long) p_slot; - up(&event_semaphore); - update_slot_info(p_slot); - } - } - } else { - /* refresh notification */ - if (p_slot) - update_slot_info(p_slot); - } - - ctrl->event_queue[loop].event_type = 0; - - change = 1; - } - } /* End of FOR loop */ + switch (p_slot->state) { + case STATIC_STATE: + p_slot->hpc_ops->get_power_status(p_slot, &getstatus); + if (getstatus) { + p_slot->state = BLINKINGOFF_STATE; + info("PCI slot #%s - powering off due to button " + "press.\n", p_slot->name); + } else { + p_slot->state = BLINKINGON_STATE; + info("PCI slot #%s - powering on due to button " + "press.\n", p_slot->name); + } + /* blink green LED and turn off amber */ + if (PWR_LED(ctrl->ctrlcap)) + p_slot->hpc_ops->green_led_blink(p_slot); + if (ATTN_LED(ctrl->ctrlcap)) + p_slot->hpc_ops->set_attention_status(p_slot, 0); + + schedule_delayed_work(&p_slot->work, 5*HZ); + break; + case BLINKINGOFF_STATE: + case BLINKINGON_STATE: + /* + * Cancel if we are still blinking; this means that we + * press the attention again before the 5 sec. limit + * expires to cancel hot-add or hot-remove + */ + info("Button cancel on Slot(%s)\n", p_slot->name); + dbg("%s: button cancel\n", __FUNCTION__); + cancel_delayed_work(&p_slot->work); + if (p_slot->state == BLINKINGOFF_STATE) { + if (PWR_LED(ctrl->ctrlcap)) + p_slot->hpc_ops->green_led_on(p_slot); + } else { + if (PWR_LED(ctrl->ctrlcap)) + p_slot->hpc_ops->green_led_off(p_slot); + } + if (ATTN_LED(ctrl->ctrlcap)) + p_slot->hpc_ops->set_attention_status(p_slot, 0); + info("PCI slot #%s - action canceled due to button press\n", + p_slot->name); + p_slot->state = STATIC_STATE; + break; + case POWEROFF_STATE: + case POWERON_STATE: + /* + * Ignore if the slot is on power-on or power-off state; + * this means that the previous attention button action + * to hot-add or hot-remove is undergoing + */ + info("Button ignore on Slot(%s)\n", p_slot->name); + update_slot_info(p_slot); + break; + default: + warn("Not a valid state\n"); + break; } } +/* + * Note: This function must be called with slot->lock held + */ +static void handle_surprise_event(struct slot *p_slot) +{ + u8 getstatus; + struct power_work_info *info; + + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + err("%s: Cannot allocate memory\n", __FUNCTION__); + return; + } + info->p_slot = p_slot; + INIT_WORK(&info->work, pciehp_power_thread); + + p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); + if (!getstatus) + p_slot->state = POWEROFF_STATE; + else + p_slot->state = POWERON_STATE; + + queue_work(pciehp_wq, &info->work); +} + +static void interrupt_event_handler(struct work_struct *work) +{ + struct event_info *info = container_of(work, struct event_info, work); + struct slot *p_slot = info->p_slot; + struct controller *ctrl = p_slot->ctrl; + + mutex_lock(&p_slot->lock); + switch (info->event_type) { + case INT_BUTTON_PRESS: + handle_button_press_event(p_slot); + break; + case INT_POWER_FAULT: + if (!POWER_CTRL(ctrl->ctrlcap)) + break; + if (ATTN_LED(ctrl->ctrlcap)) + p_slot->hpc_ops->set_attention_status(p_slot, 1); + if (PWR_LED(ctrl->ctrlcap)) + p_slot->hpc_ops->green_led_off(p_slot); + break; + case INT_PRESENCE_ON: + case INT_PRESENCE_OFF: + if (!HP_SUPR_RM(ctrl->ctrlcap)) + break; + dbg("Surprise Removal\n"); + update_slot_info(p_slot); + handle_surprise_event(p_slot); + break; + default: + update_slot_info(p_slot); + break; + } + mutex_unlock(&p_slot->lock); + + kfree(info); +} + int pciehp_enable_slot(struct slot *p_slot) { u8 getstatus = 0; @@ -653,7 +538,7 @@ int pciehp_enable_slot(struct slot *p_slot) rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); if (rc || !getstatus) { info("%s: no adapter on slot(%s)\n", __FUNCTION__, - slot_name(p_slot)); + p_slot->name); mutex_unlock(&p_slot->ctrl->crit_sect); return -ENODEV; } @@ -661,7 +546,7 @@ int pciehp_enable_slot(struct slot *p_slot) rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (rc || getstatus) { info("%s: latch open on slot(%s)\n", __FUNCTION__, - slot_name(p_slot)); + p_slot->name); mutex_unlock(&p_slot->ctrl->crit_sect); return -ENODEV; } @@ -671,7 +556,7 @@ int pciehp_enable_slot(struct slot *p_slot) rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (rc || getstatus) { info("%s: already enabled on slot(%s)\n", __FUNCTION__, - slot_name(p_slot)); + p_slot->name); mutex_unlock(&p_slot->ctrl->crit_sect); return -EINVAL; } @@ -706,7 +591,7 @@ int pciehp_disable_slot(struct slot *p_slot) ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); if (ret || !getstatus) { info("%s: no adapter on slot(%s)\n", __FUNCTION__, - slot_name(p_slot)); + p_slot->name); mutex_unlock(&p_slot->ctrl->crit_sect); return -ENODEV; } @@ -716,7 +601,7 @@ int pciehp_disable_slot(struct slot *p_slot) ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (ret || getstatus) { info("%s: latch open on slot(%s)\n", __FUNCTION__, - slot_name(p_slot)); + p_slot->name); mutex_unlock(&p_slot->ctrl->crit_sect); return -ENODEV; } @@ -726,7 +611,7 @@ int pciehp_disable_slot(struct slot *p_slot) ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (ret || !getstatus) { info("%s: already disabled slot(%s)\n", __FUNCTION__, - slot_name(p_slot)); + p_slot->name); mutex_unlock(&p_slot->ctrl->crit_sect); return -EINVAL; } @@ -739,3 +624,66 @@ int pciehp_disable_slot(struct slot *p_slot) return ret; } +int pciehp_sysfs_enable_slot(struct slot *p_slot) +{ + int retval = -ENODEV; + + mutex_lock(&p_slot->lock); + switch (p_slot->state) { + case BLINKINGON_STATE: + cancel_delayed_work(&p_slot->work); + case STATIC_STATE: + p_slot->state = POWERON_STATE; + mutex_unlock(&p_slot->lock); + retval = pciehp_enable_slot(p_slot); + mutex_lock(&p_slot->lock); + p_slot->state = STATIC_STATE; + break; + case POWERON_STATE: + info("Slot %s is already in powering on state\n", + p_slot->name); + break; + case BLINKINGOFF_STATE: + case POWEROFF_STATE: + info("Already enabled on slot %s\n", p_slot->name); + break; + default: + err("Not a valid state on slot %s\n", p_slot->name); + break; + } + mutex_unlock(&p_slot->lock); + + return retval; +} + +int pciehp_sysfs_disable_slot(struct slot *p_slot) +{ + int retval = -ENODEV; + + mutex_lock(&p_slot->lock); + switch (p_slot->state) { + case BLINKINGOFF_STATE: + cancel_delayed_work(&p_slot->work); + case STATIC_STATE: + p_slot->state = POWEROFF_STATE; + mutex_unlock(&p_slot->lock); + retval = pciehp_disable_slot(p_slot); + mutex_lock(&p_slot->lock); + p_slot->state = STATIC_STATE; + break; + case POWEROFF_STATE: + info("Slot %s is already in powering off state\n", + p_slot->name); + break; + case BLINKINGON_STATE: + case POWERON_STATE: + info("Already disabled on slot %s\n", p_slot->name); + break; + default: + err("Not a valid state on slot %s\n", p_slot->name); + break; + } + mutex_unlock(&p_slot->lock); + + return retval; +} diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index fbc64aa2dd68..9aac6a87eb53 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -71,6 +71,8 @@ #define DBG_LEAVE_ROUTINE #endif /* DEBUG */ +static atomic_t pciehp_num_controllers = ATOMIC_INIT(0); + struct ctrl_reg { u8 cap_id; u8 nxt_ptr; @@ -219,10 +221,7 @@ static inline int pciehp_writel(struct controller *ctrl, int reg, u32 value) #define EMI_STATE 0x0080 #define EMI_STATUS_BIT 7 -static spinlock_t hpc_event_lock; - DEFINE_DBG_BUFFER /* Debug string buffer for entire HPC defined here */ -static int ctlr_seq_num = 0; /* Controller sequence # */ static irqreturn_t pcie_isr(int irq, void *dev_id); static void start_int_poll_timer(struct controller *ctrl, int sec); @@ -656,6 +655,13 @@ static void hpc_release_ctlr(struct controller *ctrl) else free_irq(ctrl->pci_dev->irq, ctrl); + /* + * If this is the last controller to be released, destroy the + * pciehp work queue + */ + if (atomic_dec_and_test(&pciehp_num_controllers)) + destroy_workqueue(pciehp_wq); + DBG_LEAVE_ROUTINE } @@ -1152,7 +1158,6 @@ int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev) int pcie_init(struct controller * ctrl, struct pcie_device *dev) { int rc; - static int first = 1; u16 temp_word; u16 cap_reg; u16 intr_enable = 0; @@ -1221,11 +1226,6 @@ int pcie_init(struct controller * ctrl, struct pcie_device *dev) dbg("%s: SLOTCTRL offset %x slot_ctrl %x\n", __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_ctrl); - if (first) { - spin_lock_init(&hpc_event_lock); - first = 0; - } - for ( rc = 0; rc < DEVICE_COUNT_RESOURCE; rc++) if (pci_resource_len(pdev, rc) > 0) dbg("pci resource[%d] start=0x%llx(len=0x%llx)\n", rc, @@ -1286,7 +1286,8 @@ int pcie_init(struct controller * ctrl, struct pcie_device *dev) rc = request_irq(ctrl->pci_dev->irq, pcie_isr, IRQF_SHARED, MY_NAME, (void *)ctrl); dbg("%s: request_irq %d for hpc%d (returns %d)\n", - __FUNCTION__, ctrl->pci_dev->irq, ctlr_seq_num, rc); + __FUNCTION__, ctrl->pci_dev->irq, + atomic_read(&pciehp_num_controllers), rc); if (rc) { err("Can't get irq %d for the hotplug controller\n", ctrl->pci_dev->irq); @@ -1296,6 +1297,18 @@ int pcie_init(struct controller * ctrl, struct pcie_device *dev) dbg("pciehp ctrl b:d:f:irq=0x%x:%x:%x:%x\n", pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), dev->irq); + /* + * If this is the first controller to be initialized, + * initialize the pciehp work queue + */ + if (atomic_add_return(1, &pciehp_num_controllers) == 1) { + pciehp_wq = create_singlethread_workqueue("pciehpd"); + if (!pciehp_wq) { + rc = -ENOMEM; + goto abort_free_irq; + } + } + rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word); if (rc) { err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__); @@ -1349,7 +1362,6 @@ int pcie_init(struct controller * ctrl, struct pcie_device *dev) goto abort_disable_intr; } - ctlr_seq_num++; ctrl->hpc_ops = &pciehp_hpc_ops; DBG_LEAVE_ROUTINE diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c index 72383467a0d5..bb3c101c2c5a 100644 --- a/drivers/pci/hotplug/rpadlpar_core.c +++ b/drivers/pci/hotplug/rpadlpar_core.c @@ -98,7 +98,15 @@ static struct device_node *find_dlpar_node(char *drc_name, int *node_type) return NULL; } -static struct slot *find_slot(struct device_node *dn) +/** + * find_php_slot - return hotplug slot structure for device node + * + * This routine will return the hotplug slot structure + * for a given device node. Note that built-in PCI slots + * may be dlpar-able, but not hot-pluggable, so this routine + * will return NULL for built-in PCI slots. + */ +static struct slot *find_php_slot(struct device_node *dn) { struct list_head *tmp, *n; struct slot *slot; @@ -224,9 +232,9 @@ static int dlpar_remove_phb(char *drc_name, struct device_node *dn) if (!pcibios_find_pci_bus(dn)) return -EINVAL; - slot = find_slot(dn); + /* If pci slot is hotplugable, use hotplug to remove it */ + slot = find_php_slot(dn); if (slot) { - /* Remove hotplug slot */ if (rpaphp_deregister_slot(slot)) { printk(KERN_ERR "%s: unable to remove hotplug slot %s\n", @@ -370,22 +378,17 @@ int dlpar_remove_pci_slot(char *drc_name, struct device_node *dn) if (!bus) return -EINVAL; - slot = find_slot(dn); + /* If pci slot is hotplugable, use hotplug to remove it */ + slot = find_php_slot(dn); if (slot) { - /* Remove hotplug slot */ if (rpaphp_deregister_slot(slot)) { printk(KERN_ERR "%s: unable to remove hotplug slot %s\n", __FUNCTION__, drc_name); return -EIO; } - } else { - struct pci_dev *dev, *tmp; - list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) { - eeh_remove_bus_device(dev); - pci_remove_bus_device(dev); - } - } + } else + pcibios_remove_pci_devices(bus); if (unmap_bus_range(bus)) { printk(KERN_ERR "%s: failed to unmap bus range\n", diff --git a/drivers/pci/hotplug/rpaphp.h b/drivers/pci/hotplug/rpaphp.h index 2e7accf0f734..c822a779653f 100644 --- a/drivers/pci/hotplug/rpaphp.h +++ b/drivers/pci/hotplug/rpaphp.h @@ -83,19 +83,15 @@ struct slot { extern struct hotplug_slot_ops rpaphp_hotplug_slot_ops; extern struct list_head rpaphp_slot_head; -extern int num_slots; /* function prototypes */ /* rpaphp_pci.c */ -extern int rpaphp_enable_pci_slot(struct slot *slot); -extern int rpaphp_register_pci_slot(struct slot *slot); -extern int rpaphp_get_pci_adapter_status(struct slot *slot, int is_init, u8 * value); +extern int rpaphp_enable_slot(struct slot *slot); extern int rpaphp_get_sensor_state(struct slot *slot, int *state); /* rpaphp_core.c */ extern int rpaphp_add_slot(struct device_node *dn); -extern int rpaphp_remove_slot(struct slot *slot); extern int rpaphp_get_drc_props(struct device_node *dn, int *drc_index, char **drc_name, char **drc_type, int *drc_power_domain); @@ -104,7 +100,5 @@ extern void dealloc_slot_struct(struct slot *slot); extern struct slot *alloc_slot_struct(struct device_node *dn, int drc_index, char *drc_name, int power_domain); extern int rpaphp_register_slot(struct slot *slot); extern int rpaphp_deregister_slot(struct slot *slot); -extern int rpaphp_get_power_status(struct slot *slot, u8 * value); -extern int rpaphp_set_attention_status(struct slot *slot, u8 status); #endif /* _PPC64PHP_H */ diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index 71a2cb8baa4a..847936fe327e 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -39,9 +39,7 @@ #include "rpaphp.h" int debug; -static struct semaphore rpaphp_sem; LIST_HEAD(rpaphp_slot_head); -int num_slots; #define DRIVER_VERSION "0.1" #define DRIVER_AUTHOR "Linda Xie <lxie@us.ibm.com>" @@ -55,11 +53,6 @@ MODULE_LICENSE("GPL"); module_param(debug, bool, 0644); -static int rpaphp_get_attention_status(struct slot *slot) -{ - return slot->hotplug_slot->info->attention_status; -} - /** * set_attention_status - set attention LED * echo 0 > attention -- set LED OFF @@ -69,79 +62,75 @@ static int rpaphp_get_attention_status(struct slot *slot) */ static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 value) { - int retval = 0; + int rc; struct slot *slot = (struct slot *)hotplug_slot->private; - down(&rpaphp_sem); switch (value) { case 0: - retval = rpaphp_set_attention_status(slot, LED_OFF); - hotplug_slot->info->attention_status = 0; - break; case 1: - default: - retval = rpaphp_set_attention_status(slot, LED_ON); - hotplug_slot->info->attention_status = 1; - break; case 2: - retval = rpaphp_set_attention_status(slot, LED_ID); - hotplug_slot->info->attention_status = 2; + break; + default: + value = 1; break; } - up(&rpaphp_sem); - return retval; + + rc = rtas_set_indicator(DR_INDICATOR, slot->index, value); + if (!rc) + hotplug_slot->info->attention_status = value; + + return rc; } /** * get_power_status - get power status of a slot * @hotplug_slot: slot to get status * @value: pointer to store status - * - * */ static int get_power_status(struct hotplug_slot *hotplug_slot, u8 * value) { - int retval; + int retval, level; struct slot *slot = (struct slot *)hotplug_slot->private; - down(&rpaphp_sem); - retval = rpaphp_get_power_status(slot, value); - up(&rpaphp_sem); + retval = rtas_get_power_level (slot->power_domain, &level); + if (!retval) + *value = level; return retval; } /** * get_attention_status - get attention LED status - * - * */ static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 * value) { - int retval = 0; struct slot *slot = (struct slot *)hotplug_slot->private; - - down(&rpaphp_sem); - *value = rpaphp_get_attention_status(slot); - up(&rpaphp_sem); - return retval; + *value = slot->hotplug_slot->info->attention_status; + return 0; } static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 * value) { struct slot *slot = (struct slot *)hotplug_slot->private; - int retval = 0; + int rc, state; - down(&rpaphp_sem); - retval = rpaphp_get_pci_adapter_status(slot, 0, value); - up(&rpaphp_sem); - return retval; + rc = rpaphp_get_sensor_state(slot, &state); + + *value = NOT_VALID; + if (rc) + return rc; + + if (state == EMPTY) + *value = EMPTY; + else if (state == PRESENT) + *value = slot->state; + + return 0; } static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) { struct slot *slot = (struct slot *)hotplug_slot->private; - down(&rpaphp_sem); switch (slot->type) { case 1: case 2: @@ -172,7 +161,6 @@ static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_spe break; } - up(&rpaphp_sem); return 0; } @@ -265,6 +253,14 @@ static int is_php_type(char *drc_type) return 1; } +/** + * is_php_dn() - return 1 if this is a hotpluggable pci slot, else 0 + * + * This routine will return true only if the device node is + * a hotpluggable slot. This routine will return false + * for built-in pci slots (even when the built-in slots are + * dlparable.) + */ static int is_php_dn(struct device_node *dn, const int **indexes, const int **names, const int **types, const int **power_domains) { @@ -272,24 +268,31 @@ static int is_php_dn(struct device_node *dn, const int **indexes, int rc; rc = get_children_props(dn, indexes, names, &drc_types, power_domains); - if (rc >= 0) { - if (is_php_type((char *) &drc_types[1])) { - *types = drc_types; - return 1; - } - } + if (rc < 0) + return 0; - return 0; + if (!is_php_type((char *) &drc_types[1])) + return 0; + + *types = drc_types; + return 1; } /** - * rpaphp_add_slot -- add hotplug or dlpar slot + * rpaphp_add_slot -- declare a hotplug slot to the hotplug subsystem. + * @dn device node of slot + * + * This subroutine will register a hotplugable slot with the + * PCI hotplug infrastructure. This routine is typicaly called + * during boot time, if the hotplug slots are present at boot time, + * or is called later, by the dlpar add code, if the slot is + * being dynamically added during runtime. + * + * If the device node points at an embedded (built-in) slot, this + * routine will just return without doing anything, since embedded + * slots cannot be hotplugged. * - * rpaphp not only registers PCI hotplug slots(HOTPLUG), - * but also logical DR slots(EMBEDDED). - * HOTPLUG slot: An adapter can be physically added/removed. - * EMBEDDED slot: An adapter can be logically removed/added - * from/to a partition with the slot. + * To remove a slot, it suffices to call rpaphp_deregister_slot() */ int rpaphp_add_slot(struct device_node *dn) { @@ -299,34 +302,42 @@ int rpaphp_add_slot(struct device_node *dn) const int *indexes, *names, *types, *power_domains; char *name, *type; + if (!dn->name || strcmp(dn->name, "pci")) + return 0; + + /* If this is not a hotplug slot, return without doing anything. */ + if (!is_php_dn(dn, &indexes, &names, &types, &power_domains)) + return 0; + dbg("Entry %s: dn->full_name=%s\n", __FUNCTION__, dn->full_name); /* register PCI devices */ - if (dn->name != 0 && strcmp(dn->name, "pci") == 0) { - if (!is_php_dn(dn, &indexes, &names, &types, &power_domains)) - goto exit; - - name = (char *) &names[1]; - type = (char *) &types[1]; - for (i = 0; i < indexes[0]; i++, - name += (strlen(name) + 1), type += (strlen(type) + 1)) { - - if (!(slot = alloc_slot_struct(dn, indexes[i + 1], name, - power_domains[i + 1]))) { - retval = -ENOMEM; - goto exit; - } - slot->type = simple_strtoul(type, NULL, 10); + name = (char *) &names[1]; + type = (char *) &types[1]; + for (i = 0; i < indexes[0]; i++) { + + slot = alloc_slot_struct(dn, indexes[i + 1], name, power_domains[i + 1]); + if (!slot) + return -ENOMEM; + + slot->type = simple_strtoul(type, NULL, 10); - dbg("Found drc-index:0x%x drc-name:%s drc-type:%s\n", - indexes[i + 1], name, type); + dbg("Found drc-index:0x%x drc-name:%s drc-type:%s\n", + indexes[i + 1], name, type); - retval = rpaphp_register_pci_slot(slot); - } + retval = rpaphp_enable_slot(slot); + if (!retval) + retval = rpaphp_register_slot(slot); + + if (retval) + dealloc_slot_struct(slot); + + name += strlen(name) + 1; + type += strlen(type) + 1; } -exit: - dbg("%s - Exit: num_slots=%d rc[%d]\n", - __FUNCTION__, num_slots, retval); + dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval); + + /* XXX FIXME: reports a failure only if last entry in loop failed */ return retval; } @@ -354,7 +365,6 @@ static int __init rpaphp_init(void) struct device_node *dn = NULL; info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); - init_MUTEX(&rpaphp_sem); while ((dn = of_find_node_by_name(dn, "pci"))) rpaphp_add_slot(dn); @@ -367,8 +377,9 @@ static void __exit rpaphp_exit(void) cleanup_slots(); } -static int __enable_slot(struct slot *slot) +static int enable_slot(struct hotplug_slot *hotplug_slot) { + struct slot *slot = (struct slot *)hotplug_slot->private; int state; int retval; @@ -392,46 +403,17 @@ static int __enable_slot(struct slot *slot) return 0; } -static int enable_slot(struct hotplug_slot *hotplug_slot) +static int disable_slot(struct hotplug_slot *hotplug_slot) { - int retval; struct slot *slot = (struct slot *)hotplug_slot->private; - - down(&rpaphp_sem); - retval = __enable_slot(slot); - up(&rpaphp_sem); - - return retval; -} - -static int __disable_slot(struct slot *slot) -{ - struct pci_dev *dev, *tmp; - if (slot->state == NOT_CONFIGURED) return -EINVAL; - list_for_each_entry_safe(dev, tmp, &slot->bus->devices, bus_list) { - eeh_remove_bus_device(dev); - pci_remove_bus_device(dev); - } - + pcibios_remove_pci_devices(slot->bus); slot->state = NOT_CONFIGURED; return 0; } -static int disable_slot(struct hotplug_slot *hotplug_slot) -{ - struct slot *slot = (struct slot *)hotplug_slot->private; - int retval; - - down(&rpaphp_sem); - retval = __disable_slot (slot); - up(&rpaphp_sem); - - return retval; -} - struct hotplug_slot_ops rpaphp_hotplug_slot_ops = { .owner = THIS_MODULE, .enable_slot = enable_slot, diff --git a/drivers/pci/hotplug/rpaphp_pci.c b/drivers/pci/hotplug/rpaphp_pci.c index 6f6cbede5135..54ca8650d511 100644 --- a/drivers/pci/hotplug/rpaphp_pci.c +++ b/drivers/pci/hotplug/rpaphp_pci.c @@ -64,75 +64,6 @@ int rpaphp_get_sensor_state(struct slot *slot, int *state) return rc; } -/** - * get_pci_adapter_status - get the status of a slot - * - * 0-- slot is empty - * 1-- adapter is configured - * 2-- adapter is not configured - * 3-- not valid - */ -int rpaphp_get_pci_adapter_status(struct slot *slot, int is_init, u8 * value) -{ - struct pci_bus *bus; - int state, rc; - - *value = NOT_VALID; - rc = rpaphp_get_sensor_state(slot, &state); - if (rc) - goto exit; - - if (state == EMPTY) - *value = EMPTY; - else if (state == PRESENT) { - if (!is_init) { - /* at run-time slot->state can be changed by */ - /* config/unconfig adapter */ - *value = slot->state; - } else { - bus = pcibios_find_pci_bus(slot->dn); - if (bus && !list_empty(&bus->devices)) - *value = CONFIGURED; - else - *value = NOT_CONFIGURED; - } - } -exit: - return rc; -} - -static void print_slot_pci_funcs(struct pci_bus *bus) -{ - struct device_node *dn; - struct pci_dev *dev; - - dn = pci_bus_to_OF_node(bus); - if (!dn) - return; - - dbg("%s: pci_devs of slot[%s]\n", __FUNCTION__, dn->full_name); - list_for_each_entry (dev, &bus->devices, bus_list) - dbg("\t%s\n", pci_name(dev)); - return; -} - -static int setup_pci_hotplug_slot_info(struct slot *slot) -{ - struct hotplug_slot_info *hotplug_slot_info = slot->hotplug_slot->info; - - dbg("%s Initilize the PCI slot's hotplug->info structure ...\n", - __FUNCTION__); - rpaphp_get_power_status(slot, &hotplug_slot_info->power_status); - rpaphp_get_pci_adapter_status(slot, 1, - &hotplug_slot_info->adapter_status); - if (hotplug_slot_info->adapter_status == NOT_VALID) { - err("%s: NOT_VALID: skip dn->full_name=%s\n", - __FUNCTION__, slot->dn->full_name); - return -EINVAL; - } - return 0; -} - static void set_slot_name(struct slot *slot) { struct pci_bus *bus = slot->bus; @@ -146,69 +77,73 @@ static void set_slot_name(struct slot *slot) bus->number); } -static int setup_pci_slot(struct slot *slot) +/** + * rpaphp_enable_slot - record slot state, config pci device + * + * Initialize values in the slot, and the hotplug_slot info + * structures to indicate if there is a pci card plugged into + * the slot. If the slot is not empty, run the pcibios routine + * to get pcibios stuff correctly set up. + */ +int rpaphp_enable_slot(struct slot *slot) { - struct device_node *dn = slot->dn; + int rc, level, state; struct pci_bus *bus; + struct hotplug_slot_info *info = slot->hotplug_slot->info; + + info->adapter_status = NOT_VALID; + slot->state = EMPTY; + + /* Find out if the power is turned on for the slot */ + rc = rtas_get_power_level(slot->power_domain, &level); + if (rc) + return rc; + info->power_status = level; + + /* Figure out if there is an adapter in the slot */ + rc = rpaphp_get_sensor_state(slot, &state); + if (rc) + return rc; - BUG_ON(!dn); - bus = pcibios_find_pci_bus(dn); + bus = pcibios_find_pci_bus(slot->dn); if (!bus) { - err("%s: no pci_bus for dn %s\n", __FUNCTION__, dn->full_name); - goto exit_rc; + err("%s: no pci_bus for dn %s\n", __FUNCTION__, slot->dn->full_name); + return -EINVAL; } + info->adapter_status = EMPTY; slot->bus = bus; slot->pci_devs = &bus->devices; set_slot_name(slot); - /* find slot's pci_dev if it's not empty */ - if (slot->hotplug_slot->info->adapter_status == EMPTY) { - slot->state = EMPTY; /* slot is empty */ - } else { - /* slot is occupied */ - if (!dn->child) { - /* non-empty slot has to have child */ - err("%s: slot[%s]'s device_node doesn't have child for adapter\n", - __FUNCTION__, slot->name); - goto exit_rc; + /* if there's an adapter in the slot, go add the pci devices */ + if (state == PRESENT) { + info->adapter_status = NOT_CONFIGURED; + slot->state = NOT_CONFIGURED; + + /* non-empty slot has to have child */ + if (!slot->dn->child) { + err("%s: slot[%s]'s device_node doesn't have child for adapter\n", + __FUNCTION__, slot->name); + return -EINVAL; } - if (slot->hotplug_slot->info->adapter_status == NOT_CONFIGURED) { - dbg("%s CONFIGURING pci adapter in slot[%s]\n", - __FUNCTION__, slot->name); - pcibios_add_pci_devices(slot->bus); + if (list_empty(&bus->devices)) + pcibios_add_pci_devices(bus); - } else if (slot->hotplug_slot->info->adapter_status != CONFIGURED) { - err("%s: slot[%s]'s adapter_status is NOT_VALID.\n", - __FUNCTION__, slot->name); - goto exit_rc; - } - print_slot_pci_funcs(slot->bus); - if (!list_empty(slot->pci_devs)) { + if (!list_empty(&bus->devices)) { + info->adapter_status = CONFIGURED; slot->state = CONFIGURED; - } else { - /* DLPAR add as opposed to - * boot time */ - slot->state = NOT_CONFIGURED; + } + + if (debug) { + struct pci_dev *dev; + dbg("%s: pci_devs of slot[%s]\n", __FUNCTION__, slot->dn->full_name); + list_for_each_entry (dev, &bus->devices, bus_list) + dbg("\t%s\n", pci_name(dev)); } } - return 0; -exit_rc: - dealloc_slot_struct(slot); - return -EINVAL; -} -int rpaphp_register_pci_slot(struct slot *slot) -{ - int rc = -EINVAL; - - if (setup_pci_hotplug_slot_info(slot)) - goto exit_rc; - if (setup_pci_slot(slot)) - goto exit_rc; - rc = rpaphp_register_slot(slot); -exit_rc: - return rc; + return 0; } diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c index 3009193f0058..d4ee8723fcb3 100644 --- a/drivers/pci/hotplug/rpaphp_slot.c +++ b/drivers/pci/hotplug/rpaphp_slot.c @@ -56,7 +56,6 @@ static struct hotplug_slot_attribute php_attr_location = { static void rpaphp_release_slot(struct hotplug_slot *hotplug_slot) { struct slot *slot = (struct slot *) hotplug_slot->private; - dealloc_slot_struct(slot); } @@ -65,12 +64,12 @@ void dealloc_slot_struct(struct slot *slot) kfree(slot->hotplug_slot->info); kfree(slot->hotplug_slot->name); kfree(slot->hotplug_slot); + kfree(slot->location); kfree(slot); - return; } -struct slot *alloc_slot_struct(struct device_node *dn, int drc_index, char *drc_name, - int power_domain) +struct slot *alloc_slot_struct(struct device_node *dn, + int drc_index, char *drc_name, int power_domain) { struct slot *slot; @@ -115,7 +114,7 @@ error_nomem: static int is_registered(struct slot *slot) { - struct slot *tmp_slot; + struct slot *tmp_slot; list_for_each_entry(tmp_slot, &rpaphp_slot_head, rpaphp_slot_list) { if (!strcmp(tmp_slot->name, slot->name)) @@ -140,8 +139,6 @@ int rpaphp_deregister_slot(struct slot *slot) retval = pci_hp_deregister(php_slot); if (retval) err("Problem unregistering a slot %s\n", slot->name); - else - num_slots--; dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval); return retval; @@ -160,14 +157,13 @@ int rpaphp_register_slot(struct slot *slot) /* should not try to register the same slot twice */ if (is_registered(slot)) { err("rpaphp_register_slot: slot[%s] is already registered\n", slot->name); - retval = -EAGAIN; - goto register_fail; + return -EAGAIN; } retval = pci_hp_register(php_slot); if (retval) { err("pci_hp_register failed with error %d\n", retval); - goto register_fail; + return retval; } /* create "phy_location" file */ @@ -181,43 +177,10 @@ int rpaphp_register_slot(struct slot *slot) list_add(&slot->rpaphp_slot_list, &rpaphp_slot_head); info("Slot [%s](PCI location=%s) registered\n", slot->name, slot->location); - num_slots++; return 0; sysfs_fail: pci_hp_deregister(php_slot); -register_fail: - rpaphp_release_slot(php_slot); return retval; } -int rpaphp_get_power_status(struct slot *slot, u8 * value) -{ - int rc = 0, level; - - rc = rtas_get_power_level(slot->power_domain, &level); - if (rc < 0) { - err("failed to get power-level for slot(%s), rc=0x%x\n", - slot->location, rc); - return rc; - } - - dbg("%s the power level of slot %s(pwd-domain:0x%x) is %d\n", - __FUNCTION__, slot->name, slot->power_domain, level); - *value = level; - - return rc; -} - -int rpaphp_set_attention_status(struct slot *slot, u8 status) -{ - int rc; - - /* status: LED_OFF or LED_ON */ - rc = rtas_set_indicator(DR_INDICATOR, slot->index, status); - if (rc < 0) - err("slot(name=%s location=%s index=0x%x) set attention-status(%d) failed! rc=0x%x\n", - slot->name, slot->location, slot->index, status, rc); - - return rc; -} diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 01d31a1f697c..37ed0884b972 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -166,7 +166,7 @@ extern u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl); extern int shpchp_configure_device(struct slot *p_slot); extern int shpchp_unconfigure_device(struct slot *p_slot); extern void cleanup_slots(struct controller *ctrl); -extern void queue_pushbutton_work(struct work_struct *work); +extern void shpchp_queue_pushbutton_work(struct work_struct *work); extern int shpc_init( struct controller *ctrl, struct pci_dev *pdev); #ifdef CONFIG_ACPI diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 5f4bc08a633a..80dec9796b31 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -136,7 +136,7 @@ static int init_slots(struct controller *ctrl) slot->hpc_ops = ctrl->hpc_ops; slot->number = ctrl->first_slot + (ctrl->slot_num_inc * i); mutex_init(&slot->lock); - INIT_DELAYED_WORK(&slot->work, queue_pushbutton_work); + INIT_DELAYED_WORK(&slot->work, shpchp_queue_pushbutton_work); /* register this slot with the hotplug pci core */ hotplug_slot->private = slot; diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index b746bd265bc6..2c94d44279a3 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -433,7 +433,7 @@ static void shpchp_pushbutton_thread(struct work_struct *work) kfree(info); } -void queue_pushbutton_work(struct work_struct *work) +void shpchp_queue_pushbutton_work(struct work_struct *work) { struct slot *p_slot = container_of(work, struct slot, work.work); struct pushbutton_work_info *info; diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 435c1958a7b7..9e1321d0d5e6 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -24,20 +24,8 @@ #include "pci.h" #include "msi.h" -static struct kmem_cache* msi_cachep; - static int pci_msi_enable = 1; -static int msi_cache_init(void) -{ - msi_cachep = kmem_cache_create("msi_cache", sizeof(struct msi_desc), - 0, SLAB_HWCACHE_ALIGN, NULL, NULL); - if (!msi_cachep) - return -ENOMEM; - - return 0; -} - static void msi_set_enable(struct pci_dev *dev, int enable) { int pos; @@ -68,6 +56,29 @@ static void msix_set_enable(struct pci_dev *dev, int enable) } } +static void msix_flush_writes(unsigned int irq) +{ + struct msi_desc *entry; + + entry = get_irq_msi(irq); + BUG_ON(!entry || !entry->dev); + switch (entry->msi_attrib.type) { + case PCI_CAP_ID_MSI: + /* nothing to do */ + break; + case PCI_CAP_ID_MSIX: + { + int offset = entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE + + PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET; + readl(entry->mask_base + offset); + break; + } + default: + BUG(); + break; + } +} + static void msi_set_mask_bit(unsigned int irq, int flag) { struct msi_desc *entry; @@ -187,41 +198,28 @@ void write_msi_msg(unsigned int irq, struct msi_msg *msg) void mask_msi_irq(unsigned int irq) { msi_set_mask_bit(irq, 1); + msix_flush_writes(irq); } void unmask_msi_irq(unsigned int irq) { msi_set_mask_bit(irq, 0); + msix_flush_writes(irq); } -static int msi_free_irq(struct pci_dev* dev, int irq); - -static int msi_init(void) -{ - static int status = -ENOMEM; - - if (!status) - return status; +static int msi_free_irqs(struct pci_dev* dev); - status = msi_cache_init(); - if (status < 0) { - pci_msi_enable = 0; - printk(KERN_WARNING "PCI: MSI cache init failed\n"); - return status; - } - - return status; -} static struct msi_desc* alloc_msi_entry(void) { struct msi_desc *entry; - entry = kmem_cache_zalloc(msi_cachep, GFP_KERNEL); + entry = kzalloc(sizeof(struct msi_desc), GFP_KERNEL); if (!entry) return NULL; - entry->link.tail = entry->link.head = 0; /* single message */ + INIT_LIST_HEAD(&entry->list); + entry->irq = 0; entry->dev = NULL; return entry; @@ -256,7 +254,6 @@ static void __pci_restore_msi_state(struct pci_dev *dev) static void __pci_restore_msix_state(struct pci_dev *dev) { int pos; - int irq, head, tail = 0; struct msi_desc *entry; u16 control; @@ -266,18 +263,15 @@ static void __pci_restore_msix_state(struct pci_dev *dev) /* route the table */ pci_intx(dev, 0); /* disable intx */ msix_set_enable(dev, 0); - irq = head = dev->first_msi_irq; - entry = get_irq_msi(irq); - pos = entry->msi_attrib.pos; - while (head != tail) { - entry = get_irq_msi(irq); - write_msi_msg(irq, &entry->msg); - msi_set_mask_bit(irq, entry->msi_attrib.masked); - tail = entry->link.tail; - irq = tail; + list_for_each_entry(entry, &dev->msi_list, list) { + write_msi_msg(entry->irq, &entry->msg); + msi_set_mask_bit(entry->irq, entry->msi_attrib.masked); } + BUG_ON(list_empty(&dev->msi_list)); + entry = list_entry(dev->msi_list.next, struct msi_desc, list); + pos = entry->msi_attrib.pos; pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control); control &= ~PCI_MSIX_FLAGS_MASKALL; control |= PCI_MSIX_FLAGS_ENABLE; @@ -303,7 +297,7 @@ void pci_restore_msi_state(struct pci_dev *dev) static int msi_capability_init(struct pci_dev *dev) { struct msi_desc *entry; - int pos, irq; + int pos, ret; u16 control; msi_set_enable(dev, 0); /* Ensure msi is disabled as I set it up */ @@ -340,23 +334,21 @@ static int msi_capability_init(struct pci_dev *dev) msi_mask_bits_reg(pos, is_64bit_address(control)), maskbits); } + list_add(&entry->list, &dev->msi_list); + /* Configure MSI capability structure */ - irq = arch_setup_msi_irq(dev, entry); - if (irq < 0) { - kmem_cache_free(msi_cachep, entry); - return irq; + ret = arch_setup_msi_irqs(dev, 1, PCI_CAP_ID_MSI); + if (ret) { + msi_free_irqs(dev); + return ret; } - entry->link.head = irq; - entry->link.tail = irq; - dev->first_msi_irq = irq; - set_irq_msi(irq, entry); /* Set MSI enabled bits */ pci_intx(dev, 0); /* disable intx */ msi_set_enable(dev, 1); dev->msi_enabled = 1; - dev->irq = irq; + dev->irq = entry->irq; return 0; } @@ -373,8 +365,8 @@ static int msi_capability_init(struct pci_dev *dev) static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries, int nvec) { - struct msi_desc *head = NULL, *tail = NULL, *entry = NULL; - int irq, pos, i, j, nr_entries, temp = 0; + struct msi_desc *entry; + int pos, i, j, nr_entries, ret; unsigned long phys_addr; u32 table_offset; u16 control; @@ -413,44 +405,34 @@ static int msix_capability_init(struct pci_dev *dev, entry->dev = dev; entry->mask_base = base; - /* Configure MSI-X capability structure */ - irq = arch_setup_msi_irq(dev, entry); - if (irq < 0) { - kmem_cache_free(msi_cachep, entry); - break; - } - entries[i].vector = irq; - if (!head) { - entry->link.head = irq; - entry->link.tail = irq; - head = entry; - } else { - entry->link.head = temp; - entry->link.tail = tail->link.tail; - tail->link.tail = irq; - head->link.head = irq; - } - temp = irq; - tail = entry; - - set_irq_msi(irq, entry); + list_add(&entry->list, &dev->msi_list); } - if (i != nvec) { - int avail = i - 1; - i--; - for (; i >= 0; i--) { - irq = (entries + i)->vector; - msi_free_irq(dev, irq); - (entries + i)->vector = 0; + + ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX); + if (ret) { + int avail = 0; + list_for_each_entry(entry, &dev->msi_list, list) { + if (entry->irq != 0) { + avail++; + } } + + msi_free_irqs(dev); + /* If we had some success report the number of irqs * we succeeded in setting up. */ - if (avail <= 0) - avail = -EBUSY; + if (avail == 0) + avail = ret; return avail; } - dev->first_msi_irq = entries[0].vector; + + i = 0; + list_for_each_entry(entry, &dev->msi_list, list) { + entries[i].vector = entry->irq; + set_irq_msi(entry->irq, entry); + i++; + } /* Set MSI-X enabled bits */ pci_intx(dev, 0); /* disable intx */ msix_set_enable(dev, 1); @@ -460,21 +442,32 @@ static int msix_capability_init(struct pci_dev *dev, } /** - * pci_msi_supported - check whether MSI may be enabled on device + * pci_msi_check_device - check whether MSI may be enabled on a device * @dev: pointer to the pci_dev data structure of MSI device function + * @nvec: how many MSIs have been requested ? + * @type: are we checking for MSI or MSI-X ? * * Look at global flags, the device itself, and its parent busses - * to return 0 if MSI are supported for the device. + * to determine if MSI/-X are supported for the device. If MSI/-X is + * supported return 0, else return an error code. **/ -static -int pci_msi_supported(struct pci_dev * dev) +static int pci_msi_check_device(struct pci_dev* dev, int nvec, int type) { struct pci_bus *bus; + int ret; /* MSI must be globally enabled and supported by the device */ if (!pci_msi_enable || !dev || dev->no_msi) return -EINVAL; + /* + * You can't ask to have 0 or less MSIs configured. + * a) it's stupid .. + * b) the list manipulation code assumes nvec >= 1. + */ + if (nvec < 1) + return -ERANGE; + /* Any bridge which does NOT route MSI transactions from it's * secondary bus to it's primary bus must set NO_MSI flag on * the secondary pci_bus. @@ -485,6 +478,13 @@ int pci_msi_supported(struct pci_dev * dev) if (bus->bus_flags & PCI_BUS_FLAGS_NO_MSI) return -EINVAL; + ret = arch_msi_check_device(dev, nvec, type); + if (ret) + return ret; + + if (!pci_find_capability(dev, type)) + return -EINVAL; + return 0; } @@ -500,19 +500,12 @@ int pci_msi_supported(struct pci_dev * dev) **/ int pci_enable_msi(struct pci_dev* dev) { - int pos, status; - - if (pci_msi_supported(dev) < 0) - return -EINVAL; + int status; - status = msi_init(); - if (status < 0) + status = pci_msi_check_device(dev, 1, PCI_CAP_ID_MSI); + if (status) return status; - pos = pci_find_capability(dev, PCI_CAP_ID_MSI); - if (!pos) - return -EINVAL; - WARN_ON(!!dev->msi_enabled); /* Check whether driver already requested for MSI-X irqs */ @@ -525,69 +518,54 @@ int pci_enable_msi(struct pci_dev* dev) status = msi_capability_init(dev); return status; } +EXPORT_SYMBOL(pci_enable_msi); void pci_disable_msi(struct pci_dev* dev) { struct msi_desc *entry; int default_irq; - if (!pci_msi_enable) - return; - if (!dev) - return; - - if (!dev->msi_enabled) + if (!pci_msi_enable || !dev || !dev->msi_enabled) return; msi_set_enable(dev, 0); pci_intx(dev, 1); /* enable intx */ dev->msi_enabled = 0; - entry = get_irq_msi(dev->first_msi_irq); - if (!entry || !entry->dev || entry->msi_attrib.type != PCI_CAP_ID_MSI) { + BUG_ON(list_empty(&dev->msi_list)); + entry = list_entry(dev->msi_list.next, struct msi_desc, list); + if (!entry->dev || entry->msi_attrib.type != PCI_CAP_ID_MSI) { return; } - if (irq_has_action(dev->first_msi_irq)) { - printk(KERN_WARNING "PCI: %s: pci_disable_msi() called without " - "free_irq() on MSI irq %d\n", - pci_name(dev), dev->first_msi_irq); - BUG_ON(irq_has_action(dev->first_msi_irq)); - } else { - default_irq = entry->msi_attrib.default_irq; - msi_free_irq(dev, dev->first_msi_irq); - - /* Restore dev->irq to its default pin-assertion irq */ - dev->irq = default_irq; - } - dev->first_msi_irq = 0; + + default_irq = entry->msi_attrib.default_irq; + msi_free_irqs(dev); + + /* Restore dev->irq to its default pin-assertion irq */ + dev->irq = default_irq; } +EXPORT_SYMBOL(pci_disable_msi); -static int msi_free_irq(struct pci_dev* dev, int irq) +static int msi_free_irqs(struct pci_dev* dev) { - struct msi_desc *entry; - int head, entry_nr, type; - void __iomem *base; + struct msi_desc *entry, *tmp; - entry = get_irq_msi(irq); - if (!entry || entry->dev != dev) { - return -EINVAL; - } - type = entry->msi_attrib.type; - entry_nr = entry->msi_attrib.entry_nr; - head = entry->link.head; - base = entry->mask_base; - get_irq_msi(entry->link.head)->link.tail = entry->link.tail; - get_irq_msi(entry->link.tail)->link.head = entry->link.head; - - arch_teardown_msi_irq(irq); - kmem_cache_free(msi_cachep, entry); - - if (type == PCI_CAP_ID_MSIX) { - writel(1, base + entry_nr * PCI_MSIX_ENTRY_SIZE + - PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET); - - if (head == irq) - iounmap(base); + list_for_each_entry(entry, &dev->msi_list, list) + BUG_ON(irq_has_action(entry->irq)); + + arch_teardown_msi_irqs(dev); + + list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) { + if (entry->msi_attrib.type == PCI_CAP_ID_MSIX) { + if (list_is_last(&entry->list, &dev->msi_list)) + iounmap(entry->mask_base); + + writel(1, entry->mask_base + entry->msi_attrib.entry_nr + * PCI_MSIX_ENTRY_SIZE + + PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET); + } + list_del(&entry->list); + kfree(entry); } return 0; @@ -614,17 +592,14 @@ int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec) int i, j; u16 control; - if (!entries || pci_msi_supported(dev) < 0) + if (!entries) return -EINVAL; - status = msi_init(); - if (status < 0) + status = pci_msi_check_device(dev, nvec, PCI_CAP_ID_MSIX); + if (status) return status; pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); - if (!pos) - return -EINVAL; - pci_read_config_word(dev, msi_control_reg(pos), &control); nr_entries = multi_msix_capable(control); if (nvec > nr_entries) @@ -651,41 +626,25 @@ int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec) status = msix_capability_init(dev, entries, nvec); return status; } +EXPORT_SYMBOL(pci_enable_msix); -void pci_disable_msix(struct pci_dev* dev) +static void msix_free_all_irqs(struct pci_dev *dev) { - int irq, head, tail = 0, warning = 0; - - if (!pci_msi_enable) - return; - if (!dev) - return; + msi_free_irqs(dev); +} - if (!dev->msix_enabled) +void pci_disable_msix(struct pci_dev* dev) +{ + if (!pci_msi_enable || !dev || !dev->msix_enabled) return; msix_set_enable(dev, 0); pci_intx(dev, 1); /* enable intx */ dev->msix_enabled = 0; - irq = head = dev->first_msi_irq; - while (head != tail) { - tail = get_irq_msi(irq)->link.tail; - if (irq_has_action(irq)) - warning = 1; - else if (irq != head) /* Release MSI-X irq */ - msi_free_irq(dev, irq); - irq = tail; - } - msi_free_irq(dev, irq); - if (warning) { - printk(KERN_WARNING "PCI: %s: pci_disable_msix() called without " - "free_irq() on all MSI-X irqs\n", - pci_name(dev)); - BUG_ON(warning > 0); - } - dev->first_msi_irq = 0; + msix_free_all_irqs(dev); } +EXPORT_SYMBOL(pci_disable_msix); /** * msi_remove_pci_irq_vectors - reclaim MSI(X) irqs to unused state @@ -701,38 +660,11 @@ void msi_remove_pci_irq_vectors(struct pci_dev* dev) if (!pci_msi_enable || !dev) return; - if (dev->msi_enabled) { - if (irq_has_action(dev->first_msi_irq)) { - printk(KERN_WARNING "PCI: %s: msi_remove_pci_irq_vectors() " - "called without free_irq() on MSI irq %d\n", - pci_name(dev), dev->first_msi_irq); - BUG_ON(irq_has_action(dev->first_msi_irq)); - } else /* Release MSI irq assigned to this device */ - msi_free_irq(dev, dev->first_msi_irq); - } - if (dev->msix_enabled) { - int irq, head, tail = 0, warning = 0; - void __iomem *base = NULL; - - irq = head = dev->first_msi_irq; - while (head != tail) { - tail = get_irq_msi(irq)->link.tail; - base = get_irq_msi(irq)->mask_base; - if (irq_has_action(irq)) - warning = 1; - else if (irq != head) /* Release MSI-X irq */ - msi_free_irq(dev, irq); - irq = tail; - } - msi_free_irq(dev, irq); - if (warning) { - iounmap(base); - printk(KERN_WARNING "PCI: %s: msi_remove_pci_irq_vectors() " - "called without free_irq() on all MSI-X irqs\n", - pci_name(dev)); - BUG_ON(warning > 0); - } - } + if (dev->msi_enabled) + msi_free_irqs(dev); + + if (dev->msix_enabled) + msix_free_all_irqs(dev); } void pci_no_msi(void) @@ -740,7 +672,53 @@ void pci_no_msi(void) pci_msi_enable = 0; } -EXPORT_SYMBOL(pci_enable_msi); -EXPORT_SYMBOL(pci_disable_msi); -EXPORT_SYMBOL(pci_enable_msix); -EXPORT_SYMBOL(pci_disable_msix); +void pci_msi_init_pci_dev(struct pci_dev *dev) +{ + INIT_LIST_HEAD(&dev->msi_list); +} + + +/* Arch hooks */ + +int __attribute__ ((weak)) +arch_msi_check_device(struct pci_dev* dev, int nvec, int type) +{ + return 0; +} + +int __attribute__ ((weak)) +arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *entry) +{ + return 0; +} + +int __attribute__ ((weak)) +arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) +{ + struct msi_desc *entry; + int ret; + + list_for_each_entry(entry, &dev->msi_list, list) { + ret = arch_setup_msi_irq(dev, entry); + if (ret) + return ret; + } + + return 0; +} + +void __attribute__ ((weak)) arch_teardown_msi_irq(unsigned int irq) +{ + return; +} + +void __attribute__ ((weak)) +arch_teardown_msi_irqs(struct pci_dev *dev) +{ + struct msi_desc *entry; + + list_for_each_entry(entry, &dev->msi_list, list) { + if (entry->irq != 0) + arch_teardown_msi_irq(entry->irq); + } +} diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 39e80fcef4b3..3bb7739d26a5 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -14,20 +14,6 @@ #include "pci.h" /* - * Registration of PCI drivers and handling of hot-pluggable devices. - */ - -/* multithreaded probe logic */ -static int pci_multithread_probe = -#ifdef CONFIG_PCI_MULTITHREAD_PROBE - 1; -#else - 0; -#endif -__module_param_call("", pci_multithread_probe, param_set_bool, param_get_bool, &pci_multithread_probe, 0644); - - -/* * Dynamic device IDs are disabled for !CONFIG_HOTPLUG */ @@ -52,7 +38,7 @@ store_new_id(struct device_driver *driver, const char *buf, size_t count) { struct pci_dynid *dynid; struct pci_driver *pdrv = to_pci_driver(driver); - __u32 vendor=PCI_ANY_ID, device=PCI_ANY_ID, subvendor=PCI_ANY_ID, + __u32 vendor, device, subvendor=PCI_ANY_ID, subdevice=PCI_ANY_ID, class=0, class_mask=0; unsigned long driver_data=0; int fields=0; @@ -61,7 +47,7 @@ store_new_id(struct device_driver *driver, const char *buf, size_t count) fields = sscanf(buf, "%x %x %x %x %x %x %lux", &vendor, &device, &subvendor, &subdevice, &class, &class_mask, &driver_data); - if (fields < 0) + if (fields < 2) return -EINVAL; dynid = kzalloc(sizeof(*dynid), GFP_KERNEL); @@ -569,7 +555,6 @@ struct bus_type pci_bus_type = { static int __init pci_driver_init(void) { - pci_bus_type.multithread_probe = pci_multithread_probe; return bus_register(&pci_bus_type); } diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index cd913a2a416f..284e83a527f9 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -620,7 +620,8 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) goto err_bin_file; /* If the device has a ROM, try to expose it in sysfs. */ - if (pci_resource_len(pdev, PCI_ROM_RESOURCE)) { + if (pci_resource_len(pdev, PCI_ROM_RESOURCE) || + (pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW)) { rom_attr = kzalloc(sizeof(*rom_attr), GFP_ATOMIC); if (rom_attr) { pdev->rom_attr = rom_attr; @@ -635,7 +636,7 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) goto err_rom; } else { retval = -ENOMEM; - goto err_bin_file; + goto err_resource_files; } } /* add platform-specific attributes */ @@ -645,6 +646,8 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) err_rom: kfree(rom_attr); +err_resource_files: + pci_remove_resource_files(pdev); err_bin_file: if (pdev->cfg_size < 4096) sysfs_remove_bin_file(&pdev->dev.kobj, &pci_config_attr); @@ -695,4 +698,4 @@ static int __init pci_sysfs_init(void) return 0; } -__initcall(pci_sysfs_init); +late_initcall(pci_sysfs_init); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 2a458279327a..fd47ac0c4730 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -35,8 +35,7 @@ unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE; * Given a PCI bus, returns the highest PCI bus number present in the set * including the given PCI bus and its list of child PCI buses. */ -unsigned char __devinit -pci_bus_max_busnr(struct pci_bus* bus) +unsigned char pci_bus_max_busnr(struct pci_bus* bus) { struct list_head *tmp; unsigned char max, n; @@ -892,6 +891,34 @@ pci_disable_device(struct pci_dev *dev) } /** + * pcibios_set_pcie_reset_state - set reset state for device dev + * @dev: the PCI-E device reset + * @state: Reset state to enter into + * + * + * Sets the PCI-E reset state for the device. This is the default + * implementation. Architecture implementations can override this. + */ +int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev, + enum pcie_reset_state state) +{ + return -EINVAL; +} + +/** + * pci_set_pcie_reset_state - set reset state for device dev + * @dev: the PCI-E device reset + * @state: Reset state to enter into + * + * + * Sets the PCI reset state for the device. + */ +int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) +{ + return pcibios_set_pcie_reset_state(dev, state); +} + +/** * pci_enable_wake - enable PCI device as wakeup event source * @dev: PCI device affected * @state: PCI state from which device will issue wakeup events @@ -1295,7 +1322,7 @@ pci_intx(struct pci_dev *pdev, int enable) /** * pci_msi_off - disables any msi or msix capabilities - * @pdev: the PCI device to operate on + * @dev: the PCI device to operate on * * If you want to use msi see pci_enable_msi and friends. * This is a lower level primitive that allows us to disable @@ -1427,4 +1454,5 @@ EXPORT_SYMBOL(pci_set_power_state); EXPORT_SYMBOL(pci_save_state); EXPORT_SYMBOL(pci_restore_state); EXPORT_SYMBOL(pci_enable_wake); +EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state); diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 62ea04c8af64..3fec13d3add7 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -47,8 +47,10 @@ extern unsigned int pci_pm_d3_delay; #ifdef CONFIG_PCI_MSI void pci_no_msi(void); +extern void pci_msi_init_pci_dev(struct pci_dev *dev); #else static inline void pci_no_msi(void) { } +static inline void pci_msi_init_pci_dev(struct pci_dev *dev) { } #endif #if defined(CONFIG_PCI_MSI) && defined(CONFIG_PM) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 2fe1d690eb13..e48fcf089621 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -364,7 +364,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) } } -static struct pci_bus * __devinit pci_alloc_bus(void) +static struct pci_bus * pci_alloc_bus(void) { struct pci_bus *b; @@ -432,7 +432,7 @@ error_register: return NULL; } -struct pci_bus * __devinit pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr) +struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr) { struct pci_bus *child; @@ -461,7 +461,7 @@ static void pci_enable_crs(struct pci_dev *dev) pci_write_config_word(dev, rpcap + PCI_EXP_RTCTL, rpctl); } -static void __devinit pci_fixup_parent_subordinate_busnr(struct pci_bus *child, int max) +static void pci_fixup_parent_subordinate_busnr(struct pci_bus *child, int max) { struct pci_bus *parent = child->parent; @@ -477,7 +477,7 @@ static void __devinit pci_fixup_parent_subordinate_busnr(struct pci_bus *child, } } -unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus); +unsigned int pci_scan_child_bus(struct pci_bus *bus); /* * If it's a bridge, configure it and scan the bus behind it. @@ -489,7 +489,7 @@ unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus); * them, we proceed to assigning numbers to the remaining buses in * order to avoid overlaps between old and new bus numbers. */ -int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass) +int pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass) { struct pci_bus *child; int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS); @@ -846,6 +846,23 @@ static void pci_release_bus_bridge_dev(struct device *dev) kfree(dev); } +struct pci_dev *alloc_pci_dev(void) +{ + struct pci_dev *dev; + + dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL); + if (!dev) + return NULL; + + INIT_LIST_HEAD(&dev->global_list); + INIT_LIST_HEAD(&dev->bus_list); + + pci_msi_init_pci_dev(dev); + + return dev; +} +EXPORT_SYMBOL(alloc_pci_dev); + /* * Read the config data for a PCI device, sanity-check it * and fill in the dev structure... @@ -885,7 +902,7 @@ pci_scan_device(struct pci_bus *bus, int devfn) if (pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type)) return NULL; - dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL); + dev = alloc_pci_dev(); if (!dev) return NULL; @@ -912,7 +929,7 @@ pci_scan_device(struct pci_bus *bus, int devfn) return dev; } -void __devinit pci_device_add(struct pci_dev *dev, struct pci_bus *bus) +void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) { device_initialize(&dev->dev); dev->dev.release = pci_release_dev; @@ -935,8 +952,7 @@ void __devinit pci_device_add(struct pci_dev *dev, struct pci_bus *bus) up_write(&pci_bus_sem); } -struct pci_dev * __devinit -pci_scan_single_device(struct pci_bus *bus, int devfn) +struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn) { struct pci_dev *dev; @@ -958,7 +974,7 @@ pci_scan_single_device(struct pci_bus *bus, int devfn) * discovered devices to the @bus->devices list. New devices * will have an empty dev->global_list head. */ -int __devinit pci_scan_slot(struct pci_bus *bus, int devfn) +int pci_scan_slot(struct pci_bus *bus, int devfn) { int func, nr = 0; int scan_all_fns; @@ -991,7 +1007,7 @@ int __devinit pci_scan_slot(struct pci_bus *bus, int devfn) return nr; } -unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus) +unsigned int pci_scan_child_bus(struct pci_bus *bus) { unsigned int devfn, pass, max = bus->secondary; struct pci_dev *dev; @@ -1041,7 +1057,7 @@ unsigned int __devinit pci_do_scan_bus(struct pci_bus *bus) return max; } -struct pci_bus * __devinit pci_create_bus(struct device *parent, +struct pci_bus * pci_create_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata) { int error; @@ -1119,7 +1135,7 @@ err_out: } EXPORT_SYMBOL_GPL(pci_create_bus); -struct pci_bus * __devinit pci_scan_bus_parented(struct device *parent, +struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus, struct pci_ops *ops, void *sysdata) { struct pci_bus *b; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 3411483240cd..147d86f8edbf 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1648,6 +1648,8 @@ static void __devinit quirk_disable_msi(struct pci_dev *dev) } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_msi); /* Go through the list of Hypertransport capabilities and * return 1 if a HT MSI capability is found and enabled */ diff --git a/drivers/pci/search.c b/drivers/pci/search.c index 2dd8681d6b31..b137a27472c7 100644 --- a/drivers/pci/search.c +++ b/drivers/pci/search.c @@ -15,8 +15,7 @@ DECLARE_RWSEM(pci_bus_sem); -static struct pci_bus * -pci_do_find_bus(struct pci_bus* bus, unsigned char busnr) +static struct pci_bus *pci_do_find_bus(struct pci_bus *bus, unsigned char busnr) { struct pci_bus* child; struct list_head *tmp; diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 3554f3948814..5ec297d7a5b4 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -36,8 +36,7 @@ #define ROUND_UP(x, a) (((x) + (a) - 1) & ~((a) - 1)) -static void __devinit -pbus_assign_resources_sorted(struct pci_bus *bus) +static void pbus_assign_resources_sorted(struct pci_bus *bus) { struct pci_dev *dev; struct resource *res; @@ -220,8 +219,7 @@ pci_setup_bridge(struct pci_bus *bus) /* Check whether the bridge supports optional I/O and prefetchable memory ranges. If not, the respective base/limit registers must be read-only and read as 0. */ -static void __devinit -pci_bridge_check_ranges(struct pci_bus *bus) +static void pci_bridge_check_ranges(struct pci_bus *bus) { u16 io; u32 pmem; @@ -259,8 +257,7 @@ pci_bridge_check_ranges(struct pci_bus *bus) bus resource of a given type. Note: we intentionally skip the bus resources which have already been assigned (that is, have non-NULL parent resource). */ -static struct resource * __devinit -find_free_bus_resource(struct pci_bus *bus, unsigned long type) +static struct resource *find_free_bus_resource(struct pci_bus *bus, unsigned long type) { int i; struct resource *r; @@ -281,8 +278,7 @@ find_free_bus_resource(struct pci_bus *bus, unsigned long type) since these windows have 4K granularity and the IO ranges of non-bridge PCI devices are limited to 256 bytes. We must be careful with the ISA aliasing though. */ -static void __devinit -pbus_size_io(struct pci_bus *bus) +static void pbus_size_io(struct pci_bus *bus) { struct pci_dev *dev; struct resource *b_res = find_free_bus_resource(bus, IORESOURCE_IO); @@ -326,8 +322,7 @@ pbus_size_io(struct pci_bus *bus) /* Calculate the size of the bus and minimal alignment which guarantees that all child resources fit in this size. */ -static int __devinit -pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long type) +static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long type) { struct pci_dev *dev; unsigned long min_align, align, size; @@ -447,8 +442,7 @@ pci_bus_size_cardbus(struct pci_bus *bus) } } -void __devinit -pci_bus_size_bridges(struct pci_bus *bus) +void pci_bus_size_bridges(struct pci_bus *bus) { struct pci_dev *dev; unsigned long mask, prefmask; @@ -498,8 +492,7 @@ pci_bus_size_bridges(struct pci_bus *bus) } EXPORT_SYMBOL(pci_bus_size_bridges); -void __devinit -pci_bus_assign_resources(struct pci_bus *bus) +void pci_bus_assign_resources(struct pci_bus *bus) { struct pci_bus *b; struct pci_dev *dev; diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index cb4ced3560e9..6dfd86167e39 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -101,8 +101,7 @@ pci_update_resource(struct pci_dev *dev, struct resource *res, int resno) new & ~PCI_REGION_FLAG_MASK); } -int __devinit -pci_claim_resource(struct pci_dev *dev, int resource) +int pci_claim_resource(struct pci_dev *dev, int resource) { struct resource *res = &dev->resource[resource]; struct resource *root = NULL; @@ -212,8 +211,7 @@ EXPORT_SYMBOL_GPL(pci_assign_resource_fixed); #endif /* Sort resources by alignment */ -void __devinit -pdev_sort_resources(struct pci_dev *dev, struct resource_list *head) +void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head) { int i; |