diff options
Diffstat (limited to 'drivers/phy/rockchip/phy-rockchip-emmc.c')
| -rw-r--r-- | drivers/phy/rockchip/phy-rockchip-emmc.c | 29 |
1 files changed, 28 insertions, 1 deletions
diff --git a/drivers/phy/rockchip/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c index 2dc19ddd120f..1e424f263e7a 100644 --- a/drivers/phy/rockchip/phy-rockchip-emmc.c +++ b/drivers/phy/rockchip/phy-rockchip-emmc.c @@ -65,8 +65,14 @@ #define PHYCTRL_OTAPDLYENA 0x1 #define PHYCTRL_OTAPDLYENA_MASK 0x1 #define PHYCTRL_OTAPDLYENA_SHIFT 0xb +#define PHYCTRL_OTAPDLYSEL_DEFAULT 0x4 +#define PHYCTRL_OTAPDLYSEL_MAXVALUE 0xf #define PHYCTRL_OTAPDLYSEL_MASK 0xf #define PHYCTRL_OTAPDLYSEL_SHIFT 0x7 +#define PHYCTRL_REN_STRB_DISABLE 0x0 +#define PHYCTRL_REN_STRB_ENABLE 0x1 +#define PHYCTRL_REN_STRB_MASK 0x1 +#define PHYCTRL_REN_STRB_SHIFT 0x9 #define PHYCTRL_IS_CALDONE(x) \ ((((x) >> PHYCTRL_CALDONE_SHIFT) & \ @@ -80,6 +86,8 @@ struct rockchip_emmc_phy { struct regmap *reg_base; struct clk *emmcclk; unsigned int drive_impedance; + unsigned int enable_strobe_pulldown; + unsigned int output_tapdelay_select; }; static int rockchip_emmc_phy_power(struct phy *phy, bool on_off) @@ -291,10 +299,17 @@ static int rockchip_emmc_phy_power_on(struct phy *phy) /* Output tap delay */ regmap_write(rk_phy->reg_base, rk_phy->reg_offset + GRF_EMMCPHY_CON0, - HIWORD_UPDATE(4, + HIWORD_UPDATE(rk_phy->output_tapdelay_select, PHYCTRL_OTAPDLYSEL_MASK, PHYCTRL_OTAPDLYSEL_SHIFT)); + /* Internal pull-down for strobe line */ + regmap_write(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_CON2, + HIWORD_UPDATE(rk_phy->enable_strobe_pulldown, + PHYCTRL_REN_STRB_MASK, + PHYCTRL_REN_STRB_SHIFT)); + /* Power up emmc phy analog blocks */ return rockchip_emmc_phy_power(phy, PHYCTRL_PDB_PWR_ON); } @@ -359,10 +374,22 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev) rk_phy->reg_offset = reg_offset; rk_phy->reg_base = grf; rk_phy->drive_impedance = PHYCTRL_DR_50OHM; + rk_phy->enable_strobe_pulldown = PHYCTRL_REN_STRB_DISABLE; + rk_phy->output_tapdelay_select = PHYCTRL_OTAPDLYSEL_DEFAULT; if (!of_property_read_u32(dev->of_node, "drive-impedance-ohm", &val)) rk_phy->drive_impedance = convert_drive_impedance_ohm(pdev, val); + if (of_property_read_bool(dev->of_node, "enable-strobe-pulldown")) + rk_phy->enable_strobe_pulldown = PHYCTRL_REN_STRB_ENABLE; + + if (!of_property_read_u32(dev->of_node, "output-tapdelay-select", &val)) { + if (val <= PHYCTRL_OTAPDLYSEL_MAXVALUE) + rk_phy->output_tapdelay_select = val; + else + dev_err(dev, "output-tapdelay-select exceeds limit, apply default\n"); + } + generic_phy = devm_phy_create(dev, dev->of_node, &ops); if (IS_ERR(generic_phy)) { dev_err(dev, "failed to create PHY\n"); |