diff options
Diffstat (limited to 'drivers/phy/samsung')
-rw-r--r-- | drivers/phy/samsung/Kconfig | 25 | ||||
-rw-r--r-- | drivers/phy/samsung/Makefile | 5 | ||||
-rw-r--r-- | drivers/phy/samsung/phy-exynos-dp-video.c | 4 | ||||
-rw-r--r-- | drivers/phy/samsung/phy-exynos-mipi-video.c | 4 | ||||
-rw-r--r-- | drivers/phy/samsung/phy-exynos-pcie.c | 311 | ||||
-rw-r--r-- | drivers/phy/samsung/phy-exynos5-usbdrd.c | 59 | ||||
-rw-r--r-- | drivers/phy/samsung/phy-exynos5250-sata.c | 26 | ||||
-rw-r--r-- | drivers/phy/samsung/phy-exynos5250-usb2.c | 48 | ||||
-rw-r--r-- | drivers/phy/samsung/phy-exynos7-ufs.c | 85 | ||||
-rw-r--r-- | drivers/phy/samsung/phy-exynosautov9-ufs.c | 74 | ||||
-rw-r--r-- | drivers/phy/samsung/phy-fsd-ufs.c | 63 | ||||
-rw-r--r-- | drivers/phy/samsung/phy-s5pv210-usb2.c | 4 | ||||
-rw-r--r-- | drivers/phy/samsung/phy-samsung-ufs.c | 329 | ||||
-rw-r--r-- | drivers/phy/samsung/phy-samsung-ufs.h | 146 | ||||
-rw-r--r-- | drivers/phy/samsung/phy-samsung-usb2.c | 10 | ||||
-rw-r--r-- | drivers/phy/samsung/phy-samsung-usb2.h | 3 |
16 files changed, 919 insertions, 277 deletions
diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig index 9e483d1fdaf2..3ccaabf2850a 100644 --- a/drivers/phy/samsung/Kconfig +++ b/drivers/phy/samsung/Kconfig @@ -3,23 +3,23 @@ # Phy drivers for Samsung platforms # config PHY_EXYNOS_DP_VIDEO - tristate "EXYNOS SoC series Display Port PHY driver" + tristate "Exynos SoC series Display Port PHY driver" depends on OF depends on ARCH_EXYNOS || COMPILE_TEST default ARCH_EXYNOS select GENERIC_PHY help - Support for Display Port PHY found on Samsung EXYNOS SoCs. + Support for Display Port PHY found on Samsung Exynos SoCs. config PHY_EXYNOS_MIPI_VIDEO - tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" + tristate "S5P/Exynos SoC series MIPI CSI-2/DSI PHY driver" depends on HAS_IOMEM depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST select GENERIC_PHY default y if ARCH_S5PV210 || ARCH_EXYNOS help Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P - and EXYNOS SoCs. + and Exynos SoCs. config PHY_EXYNOS_PCIE bool "Exynos PCIe PHY driver" @@ -29,8 +29,17 @@ config PHY_EXYNOS_PCIE Enable PCIe PHY support for Exynos SoC series. This driver provides PHY interface for Exynos PCIe controller. +config PHY_SAMSUNG_UFS + tristate "Exynos SoC series UFS PHY driver" + depends on OF && (ARCH_EXYNOS || COMPILE_TEST) + select GENERIC_PHY + help + Enable this to support the Samsung Exynos SoC UFS PHY driver for + Samsung Exynos SoCs. This driver provides the interface for UFS host + controller to do PHY related programming. + config PHY_SAMSUNG_USB2 - tristate "Samsung USB 2.0 PHY driver" + tristate "S5P/Exynos SoC series USB 2.0 PHY driver" depends on HAS_IOMEM depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 || COMPILE_TEST select GENERIC_PHY @@ -38,9 +47,9 @@ config PHY_SAMSUNG_USB2 default ARCH_EXYNOS help Enable this to support the Samsung USB 2.0 PHY driver for Samsung - SoCs. This driver provides the interface for USB 2.0 PHY. Support - for particular PHYs will be enabled based on the SoC type in addition - to this driver. + S5Pv210 and Exynos SoCs. This driver provides the interface for USB + 2.0 PHY. Support for particular PHYs will be enabled based on the SoC + type in addition to this driver. config PHY_EXYNOS4210_USB2 bool diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile index db9b1aa0de6e..afb34a153e34 100644 --- a/drivers/phy/samsung/Makefile +++ b/drivers/phy/samsung/Makefile @@ -2,6 +2,11 @@ obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o +obj-$(CONFIG_PHY_SAMSUNG_UFS) += phy-exynos-ufs.o +phy-exynos-ufs-y += phy-samsung-ufs.o +phy-exynos-ufs-y += phy-exynos7-ufs.o +phy-exynos-ufs-y += phy-exynosautov9-ufs.o +phy-exynos-ufs-y += phy-fsd-ufs.o obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o phy-exynos-usb2-y += phy-samsung-usb2.o phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o diff --git a/drivers/phy/samsung/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c index 6c607df1dc9a..2b670ef91deb 100644 --- a/drivers/phy/samsung/phy-exynos-dp-video.c +++ b/drivers/phy/samsung/phy-exynos-dp-video.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Samsung EXYNOS SoC series Display Port PHY driver + * Samsung Exynos SoC series Display Port PHY driver * * Copyright (C) 2013 Samsung Electronics Co., Ltd. * Author: Jingoo Han <jg1.han@samsung.com> @@ -115,5 +115,5 @@ static struct platform_driver exynos_dp_video_phy_driver = { module_platform_driver(exynos_dp_video_phy_driver); MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); -MODULE_DESCRIPTION("Samsung EXYNOS SoC DP PHY driver"); +MODULE_DESCRIPTION("Samsung Exynos SoC DP PHY driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/samsung/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c index bb51195f189f..c1df1ef3ee3c 100644 --- a/drivers/phy/samsung/phy-exynos-mipi-video.c +++ b/drivers/phy/samsung/phy-exynos-mipi-video.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver + * Samsung S5P/Exynos SoC series MIPI CSIS/DSIM DPHY driver * * Copyright (C) 2013,2016 Samsung Electronics Co., Ltd. * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> @@ -364,6 +364,6 @@ static struct platform_driver exynos_mipi_video_phy_driver = { }; module_platform_driver(exynos_mipi_video_phy_driver); -MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC MIPI CSI-2/DSI PHY driver"); +MODULE_DESCRIPTION("Samsung S5P/Exynos SoC MIPI CSI-2/DSI PHY driver"); MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/samsung/phy-exynos-pcie.c b/drivers/phy/samsung/phy-exynos-pcie.c index 659e7ae0a6cf..53c9230c2907 100644 --- a/drivers/phy/samsung/phy-exynos-pcie.c +++ b/drivers/phy/samsung/phy-exynos-pcie.c @@ -1,73 +1,44 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Samsung EXYNOS SoC series PCIe PHY driver + * Samsung Exynos SoC series PCIe PHY driver * * Phy provider for PCIe controller on Exynos SoC series * - * Copyright (C) 2017 Samsung Electronics Co., Ltd. + * Copyright (C) 2017-2020 Samsung Electronics Co., Ltd. * Jaehoon Chung <jh80.chung@samsung.com> */ -#include <linux/delay.h> #include <linux/io.h> -#include <linux/iopoll.h> -#include <linux/init.h> #include <linux/mfd/syscon.h> -#include <linux/of.h> -#include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/phy/phy.h> #include <linux/regmap.h> -/* PCIe Purple registers */ -#define PCIE_PHY_GLOBAL_RESET 0x000 -#define PCIE_PHY_COMMON_RESET 0x004 -#define PCIE_PHY_CMN_REG 0x008 -#define PCIE_PHY_MAC_RESET 0x00c -#define PCIE_PHY_PLL_LOCKED 0x010 -#define PCIE_PHY_TRSVREG_RESET 0x020 -#define PCIE_PHY_TRSV_RESET 0x024 - -/* PCIe PHY registers */ -#define PCIE_PHY_IMPEDANCE 0x004 -#define PCIE_PHY_PLL_DIV_0 0x008 -#define PCIE_PHY_PLL_BIAS 0x00c -#define PCIE_PHY_DCC_FEEDBACK 0x014 -#define PCIE_PHY_PLL_DIV_1 0x05c -#define PCIE_PHY_COMMON_POWER 0x064 -#define PCIE_PHY_COMMON_PD_CMN BIT(3) -#define PCIE_PHY_TRSV0_EMP_LVL 0x084 -#define PCIE_PHY_TRSV0_DRV_LVL 0x088 -#define PCIE_PHY_TRSV0_RXCDR 0x0ac -#define PCIE_PHY_TRSV0_POWER 0x0c4 -#define PCIE_PHY_TRSV0_PD_TSV BIT(7) -#define PCIE_PHY_TRSV0_LVCC 0x0dc -#define PCIE_PHY_TRSV1_EMP_LVL 0x144 -#define PCIE_PHY_TRSV1_RXCDR 0x16c -#define PCIE_PHY_TRSV1_POWER 0x184 -#define PCIE_PHY_TRSV1_PD_TSV BIT(7) -#define PCIE_PHY_TRSV1_LVCC 0x19c -#define PCIE_PHY_TRSV2_EMP_LVL 0x204 -#define PCIE_PHY_TRSV2_RXCDR 0x22c -#define PCIE_PHY_TRSV2_POWER 0x244 -#define PCIE_PHY_TRSV2_PD_TSV BIT(7) -#define PCIE_PHY_TRSV2_LVCC 0x25c -#define PCIE_PHY_TRSV3_EMP_LVL 0x2c4 -#define PCIE_PHY_TRSV3_RXCDR 0x2ec -#define PCIE_PHY_TRSV3_POWER 0x304 -#define PCIE_PHY_TRSV3_PD_TSV BIT(7) -#define PCIE_PHY_TRSV3_LVCC 0x31c - -struct exynos_pcie_phy_data { - const struct phy_ops *ops; -}; +#define PCIE_PHY_OFFSET(x) ((x) * 0x4) + +/* Sysreg FSYS register offsets and bits for Exynos5433 */ +#define PCIE_EXYNOS5433_PHY_MAC_RESET 0x0208 +#define PCIE_MAC_RESET_MASK 0xFF +#define PCIE_MAC_RESET BIT(4) +#define PCIE_EXYNOS5433_PHY_L1SUB_CM_CON 0x1010 +#define PCIE_REFCLK_GATING_EN BIT(0) +#define PCIE_EXYNOS5433_PHY_COMMON_RESET 0x1020 +#define PCIE_PHY_RESET BIT(0) +#define PCIE_EXYNOS5433_PHY_GLOBAL_RESET 0x1040 +#define PCIE_GLOBAL_RESET BIT(0) +#define PCIE_REFCLK BIT(1) +#define PCIE_REFCLK_MASK 0x16 +#define PCIE_APP_REQ_EXIT_L1_MODE BIT(5) + +/* PMU PCIE PHY isolation control */ +#define EXYNOS5433_PMU_PCIE_PHY_OFFSET 0x730 /* For Exynos pcie phy */ struct exynos_pcie_phy { - const struct exynos_pcie_phy_data *drv_data; - void __iomem *phy_base; - void __iomem *blk_base; /* For exynos5440 */ + void __iomem *base; + struct regmap *pmureg; + struct regmap *fsysreg; }; static void exynos_pcie_phy_writel(void __iomem *base, u32 val, u32 offset) @@ -75,153 +46,96 @@ static void exynos_pcie_phy_writel(void __iomem *base, u32 val, u32 offset) writel(val, base + offset); } -static u32 exynos_pcie_phy_readl(void __iomem *base, u32 offset) -{ - return readl(base + offset); -} - -/* For Exynos5440 specific functions */ -static int exynos5440_pcie_phy_init(struct phy *phy) +/* Exynos5433 specific functions */ +static int exynos5433_pcie_phy_init(struct phy *phy) { struct exynos_pcie_phy *ep = phy_get_drvdata(phy); - /* DCC feedback control off */ - exynos_pcie_phy_writel(ep->phy_base, 0x29, PCIE_PHY_DCC_FEEDBACK); - - /* set TX/RX impedance */ - exynos_pcie_phy_writel(ep->phy_base, 0xd5, PCIE_PHY_IMPEDANCE); - - /* set 50Mhz PHY clock */ - exynos_pcie_phy_writel(ep->phy_base, 0x14, PCIE_PHY_PLL_DIV_0); - exynos_pcie_phy_writel(ep->phy_base, 0x12, PCIE_PHY_PLL_DIV_1); - - /* set TX Differential output for lane 0 */ - exynos_pcie_phy_writel(ep->phy_base, 0x7f, PCIE_PHY_TRSV0_DRV_LVL); - - /* set TX Pre-emphasis Level Control for lane 0 to minimum */ - exynos_pcie_phy_writel(ep->phy_base, 0x0, PCIE_PHY_TRSV0_EMP_LVL); - - /* set RX clock and data recovery bandwidth */ - exynos_pcie_phy_writel(ep->phy_base, 0xe7, PCIE_PHY_PLL_BIAS); - exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV0_RXCDR); - exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV1_RXCDR); - exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV2_RXCDR); - exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV3_RXCDR); - - /* change TX Pre-emphasis Level Control for lanes */ - exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV0_EMP_LVL); - exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV1_EMP_LVL); - exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV2_EMP_LVL); - exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV3_EMP_LVL); - - /* set LVCC */ - exynos_pcie_phy_writel(ep->phy_base, 0x20, PCIE_PHY_TRSV0_LVCC); - exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV1_LVCC); - exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV2_LVCC); - exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV3_LVCC); - - /* pulse for common reset */ - exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_COMMON_RESET); - udelay(500); - exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET); - + regmap_update_bits(ep->pmureg, EXYNOS5433_PMU_PCIE_PHY_OFFSET, + BIT(0), 1); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET, + PCIE_APP_REQ_EXIT_L1_MODE, 0); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_L1SUB_CM_CON, + PCIE_REFCLK_GATING_EN, 0); + + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_COMMON_RESET, + PCIE_PHY_RESET, 1); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_MAC_RESET, + PCIE_MAC_RESET, 0); + + /* PHY refclk 24MHz */ + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET, + PCIE_REFCLK_MASK, PCIE_REFCLK); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET, + PCIE_GLOBAL_RESET, 0); + + + exynos_pcie_phy_writel(ep->base, 0x11, PCIE_PHY_OFFSET(0x3)); + + /* band gap reference on */ + exynos_pcie_phy_writel(ep->base, 0, PCIE_PHY_OFFSET(0x20)); + exynos_pcie_phy_writel(ep->base, 0, PCIE_PHY_OFFSET(0x4b)); + + /* jitter tuning */ + exynos_pcie_phy_writel(ep->base, 0x34, PCIE_PHY_OFFSET(0x4)); + exynos_pcie_phy_writel(ep->base, 0x02, PCIE_PHY_OFFSET(0x7)); + exynos_pcie_phy_writel(ep->base, 0x41, PCIE_PHY_OFFSET(0x21)); + exynos_pcie_phy_writel(ep->base, 0x7F, PCIE_PHY_OFFSET(0x14)); + exynos_pcie_phy_writel(ep->base, 0xC0, PCIE_PHY_OFFSET(0x15)); + exynos_pcie_phy_writel(ep->base, 0x61, PCIE_PHY_OFFSET(0x36)); + + /* D0 uninit.. */ + exynos_pcie_phy_writel(ep->base, 0x44, PCIE_PHY_OFFSET(0x3D)); + + /* 24MHz */ + exynos_pcie_phy_writel(ep->base, 0x94, PCIE_PHY_OFFSET(0x8)); + exynos_pcie_phy_writel(ep->base, 0xA7, PCIE_PHY_OFFSET(0x9)); + exynos_pcie_phy_writel(ep->base, 0x93, PCIE_PHY_OFFSET(0xA)); + exynos_pcie_phy_writel(ep->base, 0x6B, PCIE_PHY_OFFSET(0xC)); + exynos_pcie_phy_writel(ep->base, 0xA5, PCIE_PHY_OFFSET(0xF)); + exynos_pcie_phy_writel(ep->base, 0x34, PCIE_PHY_OFFSET(0x16)); + exynos_pcie_phy_writel(ep->base, 0xA3, PCIE_PHY_OFFSET(0x17)); + exynos_pcie_phy_writel(ep->base, 0xA7, PCIE_PHY_OFFSET(0x1A)); + exynos_pcie_phy_writel(ep->base, 0x71, PCIE_PHY_OFFSET(0x23)); + exynos_pcie_phy_writel(ep->base, 0x4C, PCIE_PHY_OFFSET(0x24)); + + exynos_pcie_phy_writel(ep->base, 0x0E, PCIE_PHY_OFFSET(0x26)); + exynos_pcie_phy_writel(ep->base, 0x14, PCIE_PHY_OFFSET(0x7)); + exynos_pcie_phy_writel(ep->base, 0x48, PCIE_PHY_OFFSET(0x43)); + exynos_pcie_phy_writel(ep->base, 0x44, PCIE_PHY_OFFSET(0x44)); + exynos_pcie_phy_writel(ep->base, 0x03, PCIE_PHY_OFFSET(0x45)); + exynos_pcie_phy_writel(ep->base, 0xA7, PCIE_PHY_OFFSET(0x48)); + exynos_pcie_phy_writel(ep->base, 0x13, PCIE_PHY_OFFSET(0x54)); + exynos_pcie_phy_writel(ep->base, 0x04, PCIE_PHY_OFFSET(0x31)); + exynos_pcie_phy_writel(ep->base, 0, PCIE_PHY_OFFSET(0x32)); + + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_COMMON_RESET, + PCIE_PHY_RESET, 0); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_MAC_RESET, + PCIE_MAC_RESET_MASK, PCIE_MAC_RESET); return 0; } -static int exynos5440_pcie_phy_power_on(struct phy *phy) +static int exynos5433_pcie_phy_exit(struct phy *phy) { struct exynos_pcie_phy *ep = phy_get_drvdata(phy); - u32 val; - - exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET); - exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_CMN_REG); - exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSVREG_RESET); - exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSV_RESET); - - val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER); - val &= ~PCIE_PHY_COMMON_PD_CMN; - exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER); - - val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER); - val &= ~PCIE_PHY_TRSV0_PD_TSV; - exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER); - - val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER); - val &= ~PCIE_PHY_TRSV1_PD_TSV; - exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER); - - val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER); - val &= ~PCIE_PHY_TRSV2_PD_TSV; - exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER); - - val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER); - val &= ~PCIE_PHY_TRSV3_PD_TSV; - exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_L1SUB_CM_CON, + PCIE_REFCLK_GATING_EN, PCIE_REFCLK_GATING_EN); + regmap_update_bits(ep->pmureg, EXYNOS5433_PMU_PCIE_PHY_OFFSET, + BIT(0), 0); return 0; } -static int exynos5440_pcie_phy_power_off(struct phy *phy) -{ - struct exynos_pcie_phy *ep = phy_get_drvdata(phy); - u32 val; - - if (readl_poll_timeout(ep->phy_base + PCIE_PHY_PLL_LOCKED, val, - (val != 0), 1, 500)) { - dev_err(&phy->dev, "PLL Locked: 0x%x\n", val); - return -ETIMEDOUT; - } - - val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER); - val |= PCIE_PHY_COMMON_PD_CMN; - exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER); - - val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER); - val |= PCIE_PHY_TRSV0_PD_TSV; - exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER); - - val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER); - val |= PCIE_PHY_TRSV1_PD_TSV; - exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER); - - val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER); - val |= PCIE_PHY_TRSV2_PD_TSV; - exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER); - - val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER); - val |= PCIE_PHY_TRSV3_PD_TSV; - exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER); - - return 0; -} - -static int exynos5440_pcie_phy_reset(struct phy *phy) -{ - struct exynos_pcie_phy *ep = phy_get_drvdata(phy); - - exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_MAC_RESET); - exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_GLOBAL_RESET); - exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_GLOBAL_RESET); - - return 0; -} - -static const struct phy_ops exynos5440_phy_ops = { - .init = exynos5440_pcie_phy_init, - .power_on = exynos5440_pcie_phy_power_on, - .power_off = exynos5440_pcie_phy_power_off, - .reset = exynos5440_pcie_phy_reset, +static const struct phy_ops exynos5433_phy_ops = { + .init = exynos5433_pcie_phy_init, + .exit = exynos5433_pcie_phy_exit, .owner = THIS_MODULE, }; -static const struct exynos_pcie_phy_data exynos5440_pcie_phy_data = { - .ops = &exynos5440_phy_ops, -}; - static const struct of_device_id exynos_pcie_phy_match[] = { { - .compatible = "samsung,exynos5440-pcie-phy", - .data = &exynos5440_pcie_phy_data, + .compatible = "samsung,exynos5433-pcie-phy", }, {}, }; @@ -232,30 +146,30 @@ static int exynos_pcie_phy_probe(struct platform_device *pdev) struct exynos_pcie_phy *exynos_phy; struct phy *generic_phy; struct phy_provider *phy_provider; - struct resource *res; - const struct exynos_pcie_phy_data *drv_data; - - drv_data = of_device_get_match_data(dev); - if (!drv_data) - return -ENODEV; exynos_phy = devm_kzalloc(dev, sizeof(*exynos_phy), GFP_KERNEL); if (!exynos_phy) return -ENOMEM; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - exynos_phy->phy_base = devm_ioremap_resource(dev, res); - if (IS_ERR(exynos_phy->phy_base)) - return PTR_ERR(exynos_phy->phy_base); + exynos_phy->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(exynos_phy->base)) + return PTR_ERR(exynos_phy->base); - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - exynos_phy->blk_base = devm_ioremap_resource(dev, res); - if (IS_ERR(exynos_phy->blk_base)) - return PTR_ERR(exynos_phy->blk_base); + exynos_phy->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,pmu-syscon"); + if (IS_ERR(exynos_phy->pmureg)) { + dev_err(&pdev->dev, "PMU regmap lookup failed.\n"); + return PTR_ERR(exynos_phy->pmureg); + } - exynos_phy->drv_data = drv_data; + exynos_phy->fsysreg = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,fsys-sysreg"); + if (IS_ERR(exynos_phy->fsysreg)) { + dev_err(&pdev->dev, "FSYS sysreg regmap lookup failed.\n"); + return PTR_ERR(exynos_phy->fsysreg); + } - generic_phy = devm_phy_create(dev, dev->of_node, drv_data->ops); + generic_phy = devm_phy_create(dev, dev->of_node, &exynos5433_phy_ops); if (IS_ERR(generic_phy)) { dev_err(dev, "failed to create PHY\n"); return PTR_ERR(generic_phy); @@ -275,5 +189,4 @@ static struct platform_driver exynos_pcie_phy_driver = { .suppress_bind_attrs = true, } }; - builtin_platform_driver(exynos_pcie_phy_driver); diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c index e510732afb8b..ee0848fe8432 100644 --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Samsung EXYNOS5 SoC series USB DRD PHY driver + * Samsung Exynos5 SoC series USB DRD PHY driver * * Phy provider for USB 3.0 DRD controller on Exynos5 SoC series * @@ -16,6 +16,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_device.h> +#include <linux/iopoll.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/mutex.h> @@ -33,7 +34,7 @@ #define EXYNOS5_FSEL_24MHZ 0x5 #define EXYNOS5_FSEL_50MHZ 0x7 -/* EXYNOS5: USB 3.0 DRD PHY registers */ +/* Exynos5: USB 3.0 DRD PHY registers */ #define EXYNOS5_DRD_LINKSYSTEM 0x04 #define LINKSYSTEM_FLADJ_MASK (0x3f << 1) @@ -180,14 +181,14 @@ struct exynos5_usbdrd_phy_drvdata { * @utmiclk: clock for utmi+ phy * @itpclk: clock for ITP generation * @drv_data: pointer to SoC level driver data structure - * @phys[]: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY + * @phys: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY * instances each with its 'phy' and 'phy_cfg'. * @extrefclk: frequency select settings when using 'separate * reference clocks' for SS and HS operations * @ref_clk: reference clock to PHY block from which PHY's * operational clocks are derived - * vbus: VBUS regulator for phy - * vbus_boost: Boost regulator for VBUS present on few Exynos boards + * @vbus: VBUS regulator for phy + * @vbus_boost: Boost regulator for VBUS present on few Exynos boards */ struct exynos5_usbdrd_phy { struct device *dev; @@ -556,41 +557,25 @@ static int exynos5_usbdrd_phy_power_off(struct phy *phy) static int crport_handshake(struct exynos5_usbdrd_phy *phy_drd, u32 val, u32 cmd) { - u32 usec = 100; unsigned int result; + int err; writel(val | cmd, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); - do { - result = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1); - if (result & PHYREG1_CR_ACK) - break; - - udelay(1); - } while (usec-- > 0); - - if (!usec) { - dev_err(phy_drd->dev, - "CRPORT handshake timeout1 (0x%08x)\n", val); - return -ETIME; + err = readl_poll_timeout(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1, + result, (result & PHYREG1_CR_ACK), 1, 100); + if (err == -ETIMEDOUT) { + dev_err(phy_drd->dev, "CRPORT handshake timeout1 (0x%08x)\n", val); + return err; } - usec = 100; - writel(val, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); - do { - result = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1); - if (!(result & PHYREG1_CR_ACK)) - break; - - udelay(1); - } while (usec-- > 0); - - if (!usec) { - dev_err(phy_drd->dev, - "CRPORT handshake timeout2 (0x%08x)\n", val); - return -ETIME; + err = readl_poll_timeout(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1, + result, !(result & PHYREG1_CR_ACK), 1, 100); + if (err == -ETIMEDOUT) { + dev_err(phy_drd->dev, "CRPORT handshake timeout2 (0x%08x)\n", val); + return err; } return 0; @@ -714,7 +699,9 @@ static int exynos5_usbdrd_phy_calibrate(struct phy *phy) struct phy_usb_instance *inst = phy_get_drvdata(phy); struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); - return exynos5420_usbdrd_phy_calibrate(phy_drd); + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) + return exynos5420_usbdrd_phy_calibrate(phy_drd); + return 0; } static const struct phy_ops exynos5_usbdrd_phy_ops = { @@ -842,7 +829,6 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev) struct device_node *node = dev->of_node; struct exynos5_usbdrd_phy *phy_drd; struct phy_provider *phy_provider; - struct resource *res; const struct exynos5_usbdrd_phy_drvdata *drv_data; struct regmap *reg_pmu; u32 pmu_offset; @@ -856,8 +842,7 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev) dev_set_drvdata(dev, phy_drd); phy_drd->dev = dev; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - phy_drd->reg_phy = devm_ioremap_resource(dev, res); + phy_drd->reg_phy = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(phy_drd->reg_phy)) return PTR_ERR(phy_drd->reg_phy); @@ -958,7 +943,7 @@ static struct platform_driver exynos5_usb3drd_phy = { }; module_platform_driver(exynos5_usb3drd_phy); -MODULE_DESCRIPTION("Samsung EXYNOS5 SoCs USB 3.0 DRD controller PHY driver"); +MODULE_DESCRIPTION("Samsung Exynos5 SoCs USB 3.0 DRD controller PHY driver"); MODULE_AUTHOR("Vivek Gautam <gautam.vivek@samsung.com>"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:exynos5_usb3drd_phy"); diff --git a/drivers/phy/samsung/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c index 4dd7324d91b2..595adba5fb8f 100644 --- a/drivers/phy/samsung/phy-exynos5250-sata.c +++ b/drivers/phy/samsung/phy-exynos5250-sata.c @@ -162,7 +162,6 @@ static int exynos_sata_phy_probe(struct platform_device *pdev) { struct exynos_sata_phy *sata_phy; struct device *dev = &pdev->dev; - struct resource *res; struct phy_provider *phy_provider; struct device_node *node; int ret = 0; @@ -171,9 +170,7 @@ static int exynos_sata_phy_probe(struct platform_device *pdev) if (!sata_phy) return -ENOMEM; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - sata_phy->regs = devm_ioremap_resource(dev, res); + sata_phy->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(sata_phy->regs)) return PTR_ERR(sata_phy->regs); @@ -190,6 +187,7 @@ static int exynos_sata_phy_probe(struct platform_device *pdev) return -EINVAL; sata_phy->client = of_find_i2c_device_by_node(node); + of_node_put(node); if (!sata_phy->client) return -EPROBE_DEFER; @@ -198,20 +196,21 @@ static int exynos_sata_phy_probe(struct platform_device *pdev) sata_phy->phyclk = devm_clk_get(dev, "sata_phyctrl"); if (IS_ERR(sata_phy->phyclk)) { dev_err(dev, "failed to get clk for PHY\n"); - return PTR_ERR(sata_phy->phyclk); + ret = PTR_ERR(sata_phy->phyclk); + goto put_dev; } ret = clk_prepare_enable(sata_phy->phyclk); if (ret < 0) { dev_err(dev, "failed to enable source clk\n"); - return ret; + goto put_dev; } sata_phy->phy = devm_phy_create(dev, NULL, &exynos_sata_phy_ops); if (IS_ERR(sata_phy->phy)) { - clk_disable_unprepare(sata_phy->phyclk); dev_err(dev, "failed to create PHY\n"); - return PTR_ERR(sata_phy->phy); + ret = PTR_ERR(sata_phy->phy); + goto clk_disable; } phy_set_drvdata(sata_phy->phy, sata_phy); @@ -219,11 +218,18 @@ static int exynos_sata_phy_probe(struct platform_device *pdev) phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (IS_ERR(phy_provider)) { - clk_disable_unprepare(sata_phy->phyclk); - return PTR_ERR(phy_provider); + ret = PTR_ERR(phy_provider); + goto clk_disable; } return 0; + +clk_disable: + clk_disable_unprepare(sata_phy->phyclk); +put_dev: + put_device(&sata_phy->client->dev); + + return ret; } static const struct of_device_id exynos_sata_phy_of_match[] = { diff --git a/drivers/phy/samsung/phy-exynos5250-usb2.c b/drivers/phy/samsung/phy-exynos5250-usb2.c index 4f53b711fd6f..e198010e1bfd 100644 --- a/drivers/phy/samsung/phy-exynos5250-usb2.c +++ b/drivers/phy/samsung/phy-exynos5250-usb2.c @@ -117,9 +117,9 @@ /* Isolation, configured in the power management unit */ #define EXYNOS_5250_USB_ISOL_OTG_OFFSET 0x704 -#define EXYNOS_5250_USB_ISOL_OTG BIT(0) #define EXYNOS_5250_USB_ISOL_HOST_OFFSET 0x708 -#define EXYNOS_5250_USB_ISOL_HOST BIT(0) +#define EXYNOS_5420_USB_ISOL_HOST_OFFSET 0x70C +#define EXYNOS_5250_USB_ISOL_ENABLE BIT(0) /* Mode swtich register */ #define EXYNOS_5250_MODE_SWITCH_OFFSET 0x230 @@ -132,7 +132,6 @@ enum exynos4x12_phy_id { EXYNOS5250_HOST, EXYNOS5250_HSIC0, EXYNOS5250_HSIC1, - EXYNOS5250_NUM_PHYS, }; /* @@ -176,20 +175,19 @@ static void exynos5250_isol(struct samsung_usb2_phy_instance *inst, bool on) { struct samsung_usb2_phy_driver *drv = inst->drv; u32 offset; - u32 mask; + u32 mask = EXYNOS_5250_USB_ISOL_ENABLE; - switch (inst->cfg->id) { - case EXYNOS5250_DEVICE: + if (drv->cfg == &exynos5250_usb2_phy_config && + inst->cfg->id == EXYNOS5250_DEVICE) offset = EXYNOS_5250_USB_ISOL_OTG_OFFSET; - mask = EXYNOS_5250_USB_ISOL_OTG; - break; - case EXYNOS5250_HOST: + else if (drv->cfg == &exynos5250_usb2_phy_config && + inst->cfg->id == EXYNOS5250_HOST) offset = EXYNOS_5250_USB_ISOL_HOST_OFFSET; - mask = EXYNOS_5250_USB_ISOL_HOST; - break; - default: + else if (drv->cfg == &exynos5420_usb2_phy_config && + inst->cfg->id == EXYNOS5250_HOST) + offset = EXYNOS_5420_USB_ISOL_HOST_OFFSET; + else return; - } regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); } @@ -390,9 +388,31 @@ static const struct samsung_usb2_common_phy exynos5250_phys[] = { }, }; +static const struct samsung_usb2_common_phy exynos5420_phys[] = { + { + .label = "host", + .id = EXYNOS5250_HOST, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, + { + .label = "hsic", + .id = EXYNOS5250_HSIC0, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, +}; + const struct samsung_usb2_phy_config exynos5250_usb2_phy_config = { .has_mode_switch = 1, - .num_phys = EXYNOS5250_NUM_PHYS, + .num_phys = ARRAY_SIZE(exynos5250_phys), .phys = exynos5250_phys, .rate_to_clk = exynos5250_rate_to_clk, }; + +const struct samsung_usb2_phy_config exynos5420_usb2_phy_config = { + .has_mode_switch = 1, + .num_phys = ARRAY_SIZE(exynos5420_phys), + .phys = exynos5420_phys, + .rate_to_clk = exynos5250_rate_to_clk, +}; diff --git a/drivers/phy/samsung/phy-exynos7-ufs.c b/drivers/phy/samsung/phy-exynos7-ufs.c new file mode 100644 index 000000000000..a982e7c128c5 --- /dev/null +++ b/drivers/phy/samsung/phy-exynos7-ufs.c @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UFS PHY driver data for Samsung EXYNOS7 SoC + * + * Copyright (C) 2020 Samsung Electronics Co., Ltd. + */ + +#include "phy-samsung-ufs.h" + +#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL 0x720 +#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1 +#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0) + +#define EXYNOS7_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS 0x5e + +/* Calibration for phy initialization */ +static const struct samsung_ufs_phy_cfg exynos7_pre_init_cfg[] = { + PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x017, 0x84, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x035, 0x58, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x037, 0x40, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x03b, 0x83, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x04c, 0x5b, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x05c, 0x14, PWR_MODE_ANY), + END_UFS_PHY_CFG +}; + +/* Calibration for HS mode series A/B */ +static const struct samsung_ufs_phy_cfg exynos7_pre_pwr_hs_cfg[] = { + PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_HS_ANY), + PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_HS_ANY), + PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_HS_ANY), + /* Setting order: 1st(0x16, 2nd(0x15) */ + PHY_COMN_REG_CFG(0x016, 0xff, PWR_MODE_HS_ANY), + PHY_COMN_REG_CFG(0x015, 0x80, PWR_MODE_HS_ANY), + PHY_COMN_REG_CFG(0x017, 0x94, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x037, 0x43, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x038, 0x3f, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_HS_G2_SER_A), + PHY_TRSV_REG_CFG(0x042, 0xbb, PWR_MODE_HS_G2_SER_B), + PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x034, 0x35, PWR_MODE_HS_G2_SER_A), + PHY_TRSV_REG_CFG(0x034, 0x36, PWR_MODE_HS_G2_SER_B), + PHY_TRSV_REG_CFG(0x035, 0x5b, PWR_MODE_HS_G2_SER_A), + PHY_TRSV_REG_CFG(0x035, 0x5c, PWR_MODE_HS_G2_SER_B), + END_UFS_PHY_CFG +}; + +/* Calibration for HS mode series A/B atfer PMC */ +static const struct samsung_ufs_phy_cfg exynos7_post_pwr_hs_cfg[] = { + PHY_COMN_REG_CFG(0x015, 0x00, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_HS_ANY), + END_UFS_PHY_CFG +}; + +static const struct samsung_ufs_phy_cfg *exynos7_ufs_phy_cfgs[CFG_TAG_MAX] = { + [CFG_PRE_INIT] = exynos7_pre_init_cfg, + [CFG_PRE_PWR_HS] = exynos7_pre_pwr_hs_cfg, + [CFG_POST_PWR_HS] = exynos7_post_pwr_hs_cfg, +}; + +static const char * const exynos7_ufs_phy_clks[] = { + "tx0_symbol_clk", "rx0_symbol_clk", "rx1_symbol_clk", "ref_clk", +}; + +const struct samsung_ufs_phy_drvdata exynos7_ufs_phy = { + .cfgs = exynos7_ufs_phy_cfgs, + .isol = { + .offset = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL, + .mask = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK, + .en = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN, + }, + .clk_list = exynos7_ufs_phy_clks, + .num_clks = ARRAY_SIZE(exynos7_ufs_phy_clks), + .cdr_lock_status_offset = EXYNOS7_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS, +}; diff --git a/drivers/phy/samsung/phy-exynosautov9-ufs.c b/drivers/phy/samsung/phy-exynosautov9-ufs.c new file mode 100644 index 000000000000..49e2bcbef0b4 --- /dev/null +++ b/drivers/phy/samsung/phy-exynosautov9-ufs.c @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UFS PHY driver data for Samsung EXYNOSAUTO v9 SoC + * + * Copyright (C) 2021 Samsung Electronics Co., Ltd. + */ + +#include "phy-samsung-ufs.h" + +#define EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL 0x728 +#define EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1 +#define EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0) +#define EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS 0x5e + +#define PHY_TRSV_REG_CFG_AUTOV9(o, v, d) \ + PHY_TRSV_REG_CFG_OFFSET(o, v, d, 0x50) + +/* Calibration for phy initialization */ +static const struct samsung_ufs_phy_cfg exynosautov9_pre_init_cfg[] = { + PHY_COMN_REG_CFG(0x023, 0x80, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x01d, 0x10, PWR_MODE_ANY), + + PHY_TRSV_REG_CFG_AUTOV9(0x044, 0xb5, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x04d, 0x43, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x05b, 0x20, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x05e, 0xc0, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x038, 0x12, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x059, 0x58, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x06c, 0x18, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x06d, 0x02, PWR_MODE_ANY), + + PHY_COMN_REG_CFG(0x023, 0xc0, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x023, 0x00, PWR_MODE_ANY), + + PHY_TRSV_REG_CFG_AUTOV9(0x042, 0x5d, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x043, 0x80, PWR_MODE_ANY), + + END_UFS_PHY_CFG, +}; + +/* Calibration for HS mode series A/B */ +static const struct samsung_ufs_phy_cfg exynosautov9_pre_pwr_hs_cfg[] = { + PHY_TRSV_REG_CFG_AUTOV9(0x032, 0xbc, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x03c, 0x7f, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x048, 0xc0, PWR_MODE_HS_ANY), + + PHY_TRSV_REG_CFG_AUTOV9(0x04a, 0x00, PWR_MODE_HS_G3_SER_B), + PHY_TRSV_REG_CFG_AUTOV9(0x04b, 0x10, PWR_MODE_HS_G1_SER_B | + PWR_MODE_HS_G3_SER_B), + PHY_TRSV_REG_CFG_AUTOV9(0x04d, 0x63, PWR_MODE_HS_G3_SER_B), + + END_UFS_PHY_CFG, +}; + +static const struct samsung_ufs_phy_cfg *exynosautov9_ufs_phy_cfgs[CFG_TAG_MAX] = { + [CFG_PRE_INIT] = exynosautov9_pre_init_cfg, + [CFG_PRE_PWR_HS] = exynosautov9_pre_pwr_hs_cfg, +}; + +static const char * const exynosautov9_ufs_phy_clks[] = { + "ref_clk", +}; + +const struct samsung_ufs_phy_drvdata exynosautov9_ufs_phy = { + .cfgs = exynosautov9_ufs_phy_cfgs, + .isol = { + .offset = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL, + .mask = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL_MASK, + .en = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL_EN, + }, + .clk_list = exynosautov9_ufs_phy_clks, + .num_clks = ARRAY_SIZE(exynosautov9_ufs_phy_clks), + .cdr_lock_status_offset = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS, +}; diff --git a/drivers/phy/samsung/phy-fsd-ufs.c b/drivers/phy/samsung/phy-fsd-ufs.c new file mode 100644 index 000000000000..d36cabd53434 --- /dev/null +++ b/drivers/phy/samsung/phy-fsd-ufs.c @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UFS PHY driver data for FSD SoC + * + * Copyright (C) 2022 Samsung Electronics Co., Ltd. + * + */ +#include "phy-samsung-ufs.h" + +#define FSD_EMBEDDED_COMBO_PHY_CTRL 0x724 +#define FSD_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1 +#define FSD_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0) +#define FSD_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS 0x6e + +static const struct samsung_ufs_phy_cfg fsd_pre_init_cfg[] = { + PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x017, 0x94, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x035, 0x58, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x037, 0x40, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x03b, 0x83, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x04c, 0x5b, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x05c, 0x14, PWR_MODE_ANY), + END_UFS_PHY_CFG +}; + +/* Calibration for HS mode series A/B */ +static const struct samsung_ufs_phy_cfg fsd_pre_pwr_hs_cfg[] = { + END_UFS_PHY_CFG +}; + +/* Calibration for HS mode series A/B atfer PMC */ +static const struct samsung_ufs_phy_cfg fsd_post_pwr_hs_cfg[] = { + END_UFS_PHY_CFG +}; + +static const struct samsung_ufs_phy_cfg *fsd_ufs_phy_cfgs[CFG_TAG_MAX] = { + [CFG_PRE_INIT] = fsd_pre_init_cfg, + [CFG_PRE_PWR_HS] = fsd_pre_pwr_hs_cfg, + [CFG_POST_PWR_HS] = fsd_post_pwr_hs_cfg, +}; + +static const char * const fsd_ufs_phy_clks[] = { + "ref_clk", +}; + +const struct samsung_ufs_phy_drvdata fsd_ufs_phy = { + .cfgs = fsd_ufs_phy_cfgs, + .isol = { + .offset = FSD_EMBEDDED_COMBO_PHY_CTRL, + .mask = FSD_EMBEDDED_COMBO_PHY_CTRL_MASK, + .en = FSD_EMBEDDED_COMBO_PHY_CTRL_EN, + }, + .clk_list = fsd_ufs_phy_clks, + .num_clks = ARRAY_SIZE(fsd_ufs_phy_clks), + .cdr_lock_status_offset = FSD_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS, +}; diff --git a/drivers/phy/samsung/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c index 56a5083fe6f9..32be62e49804 100644 --- a/drivers/phy/samsung/phy-s5pv210-usb2.c +++ b/drivers/phy/samsung/phy-s5pv210-usb2.c @@ -139,6 +139,10 @@ static void s5pv210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on) udelay(10); rst &= ~rstbits; writel(rst, drv->reg_phy + S5PV210_UPHYRST); + /* The following delay is necessary for the reset sequence to be + * completed + */ + udelay(80); } else { pwr = readl(drv->reg_phy + S5PV210_UPHYPWR); pwr |= phypwr; diff --git a/drivers/phy/samsung/phy-samsung-ufs.c b/drivers/phy/samsung/phy-samsung-ufs.c new file mode 100644 index 000000000000..183c88e3d1ec --- /dev/null +++ b/drivers/phy/samsung/phy-samsung-ufs.c @@ -0,0 +1,329 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UFS PHY driver for Samsung SoC + * + * Copyright (C) 2020 Samsung Electronics Co., Ltd. + * Author: Seungwon Jeon <essuuj@gmail.com> + * Author: Alim Akhtar <alim.akhtar@samsung.com> + * + */ +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include "phy-samsung-ufs.h" + +#define for_each_phy_lane(phy, i) \ + for (i = 0; i < (phy)->lane_cnt; i++) +#define for_each_phy_cfg(cfg) \ + for (; (cfg)->id; (cfg)++) + +#define PHY_DEF_LANE_CNT 1 + +static void samsung_ufs_phy_config(struct samsung_ufs_phy *phy, + const struct samsung_ufs_phy_cfg *cfg, + u8 lane) +{ + enum {LANE_0, LANE_1}; /* lane index */ + + switch (lane) { + case LANE_0: + writel(cfg->val, (phy)->reg_pma + cfg->off_0); + break; + case LANE_1: + if (cfg->id == PHY_TRSV_BLK) + writel(cfg->val, (phy)->reg_pma + cfg->off_1); + break; + } +} + +static int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy) +{ + struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy); + const unsigned int timeout_us = 100000; + const unsigned int sleep_us = 10; + u32 val; + int err; + + err = readl_poll_timeout( + ufs_phy->reg_pma + PHY_APB_ADDR(PHY_PLL_LOCK_STATUS), + val, (val & PHY_PLL_LOCK_BIT), sleep_us, timeout_us); + if (err) { + dev_err(ufs_phy->dev, + "failed to get phy pll lock acquisition %d\n", err); + goto out; + } + + err = readl_poll_timeout( + ufs_phy->reg_pma + + PHY_APB_ADDR(ufs_phy->drvdata->cdr_lock_status_offset), + val, (val & PHY_CDR_LOCK_BIT), sleep_us, timeout_us); + if (err) + dev_err(ufs_phy->dev, + "failed to get phy cdr lock acquisition %d\n", err); +out: + return err; +} + +static int samsung_ufs_phy_calibrate(struct phy *phy) +{ + struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy); + const struct samsung_ufs_phy_cfg * const *cfgs = ufs_phy->cfgs; + const struct samsung_ufs_phy_cfg *cfg; + int err = 0; + int i; + + if (unlikely(ufs_phy->ufs_phy_state < CFG_PRE_INIT || + ufs_phy->ufs_phy_state >= CFG_TAG_MAX)) { + dev_err(ufs_phy->dev, "invalid phy config index %d\n", ufs_phy->ufs_phy_state); + return -EINVAL; + } + + cfg = cfgs[ufs_phy->ufs_phy_state]; + if (!cfg) + goto out; + + for_each_phy_cfg(cfg) { + for_each_phy_lane(ufs_phy, i) { + samsung_ufs_phy_config(ufs_phy, cfg, i); + } + } + + if (ufs_phy->ufs_phy_state == CFG_POST_PWR_HS) + err = samsung_ufs_phy_wait_for_lock_acq(phy); + + /** + * In Samsung ufshci, PHY need to be calibrated at different + * stages / state mainly before Linkstartup, after Linkstartup, + * before power mode change and after power mode change. + * Below state machine to make sure to calibrate PHY in each + * state. Here after configuring PHY in a given state, will + * change the state to next state so that next state phy + * calibration value can be programed + */ +out: + switch (ufs_phy->ufs_phy_state) { + case CFG_PRE_INIT: + ufs_phy->ufs_phy_state = CFG_POST_INIT; + break; + case CFG_POST_INIT: + ufs_phy->ufs_phy_state = CFG_PRE_PWR_HS; + break; + case CFG_PRE_PWR_HS: + ufs_phy->ufs_phy_state = CFG_POST_PWR_HS; + break; + case CFG_POST_PWR_HS: + /* Change back to INIT state */ + ufs_phy->ufs_phy_state = CFG_PRE_INIT; + break; + default: + dev_err(ufs_phy->dev, "wrong state for phy calibration\n"); + } + + return err; +} + +static int samsung_ufs_phy_clks_init(struct samsung_ufs_phy *phy) +{ + int i; + const struct samsung_ufs_phy_drvdata *drvdata = phy->drvdata; + int num_clks = drvdata->num_clks; + + phy->clks = devm_kcalloc(phy->dev, num_clks, sizeof(*phy->clks), + GFP_KERNEL); + if (!phy->clks) + return -ENOMEM; + + for (i = 0; i < num_clks; i++) + phy->clks[i].id = drvdata->clk_list[i]; + + return devm_clk_bulk_get(phy->dev, num_clks, phy->clks); +} + +static int samsung_ufs_phy_init(struct phy *phy) +{ + struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy); + + ss_phy->lane_cnt = phy->attrs.bus_width; + ss_phy->ufs_phy_state = CFG_PRE_INIT; + + return 0; +} + +static int samsung_ufs_phy_power_on(struct phy *phy) +{ + struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy); + int ret; + + samsung_ufs_phy_ctrl_isol(ss_phy, false); + + ret = clk_bulk_prepare_enable(ss_phy->drvdata->num_clks, ss_phy->clks); + if (ret) { + dev_err(ss_phy->dev, "failed to enable ufs phy clocks\n"); + return ret; + } + + if (ss_phy->ufs_phy_state == CFG_PRE_INIT) { + ret = samsung_ufs_phy_calibrate(phy); + if (ret) + dev_err(ss_phy->dev, "ufs phy calibration failed\n"); + } + + return ret; +} + +static int samsung_ufs_phy_power_off(struct phy *phy) +{ + struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy); + + clk_bulk_disable_unprepare(ss_phy->drvdata->num_clks, ss_phy->clks); + + samsung_ufs_phy_ctrl_isol(ss_phy, true); + + return 0; +} + +static int samsung_ufs_phy_set_mode(struct phy *generic_phy, + enum phy_mode mode, int submode) +{ + struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(generic_phy); + + ss_phy->mode = PHY_MODE_INVALID; + + if (mode > 0) + ss_phy->mode = mode; + + return 0; +} + +static int samsung_ufs_phy_exit(struct phy *phy) +{ + struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy); + + ss_phy->ufs_phy_state = CFG_TAG_MAX; + + return 0; +} + +static const struct phy_ops samsung_ufs_phy_ops = { + .init = samsung_ufs_phy_init, + .exit = samsung_ufs_phy_exit, + .power_on = samsung_ufs_phy_power_on, + .power_off = samsung_ufs_phy_power_off, + .calibrate = samsung_ufs_phy_calibrate, + .set_mode = samsung_ufs_phy_set_mode, + .owner = THIS_MODULE, +}; + +static const struct of_device_id samsung_ufs_phy_match[]; + +static int samsung_ufs_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct of_device_id *match; + struct samsung_ufs_phy *phy; + struct phy *gen_phy; + struct phy_provider *phy_provider; + const struct samsung_ufs_phy_drvdata *drvdata; + u32 isol_offset; + int err = 0; + + match = of_match_node(samsung_ufs_phy_match, dev->of_node); + if (!match) { + err = -EINVAL; + dev_err(dev, "failed to get match_node\n"); + goto out; + } + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + err = -ENOMEM; + goto out; + } + + phy->reg_pma = devm_platform_ioremap_resource_byname(pdev, "phy-pma"); + if (IS_ERR(phy->reg_pma)) { + err = PTR_ERR(phy->reg_pma); + goto out; + } + + phy->reg_pmu = syscon_regmap_lookup_by_phandle( + dev->of_node, "samsung,pmu-syscon"); + if (IS_ERR(phy->reg_pmu)) { + err = PTR_ERR(phy->reg_pmu); + dev_err(dev, "failed syscon remap for pmu\n"); + goto out; + } + + gen_phy = devm_phy_create(dev, NULL, &samsung_ufs_phy_ops); + if (IS_ERR(gen_phy)) { + err = PTR_ERR(gen_phy); + dev_err(dev, "failed to create PHY for ufs-phy\n"); + goto out; + } + + drvdata = match->data; + phy->dev = dev; + phy->drvdata = drvdata; + phy->cfgs = drvdata->cfgs; + memcpy(&phy->isol, &drvdata->isol, sizeof(phy->isol)); + + if (!of_property_read_u32_index(dev->of_node, "samsung,pmu-syscon", 1, + &isol_offset)) + phy->isol.offset = isol_offset; + + phy->lane_cnt = PHY_DEF_LANE_CNT; + + err = samsung_ufs_phy_clks_init(phy); + if (err) { + dev_err(dev, "failed to get phy clocks\n"); + goto out; + } + + phy_set_drvdata(gen_phy, phy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + err = PTR_ERR(phy_provider); + dev_err(dev, "failed to register phy-provider\n"); + goto out; + } +out: + return err; +} + +static const struct of_device_id samsung_ufs_phy_match[] = { + { + .compatible = "samsung,exynos7-ufs-phy", + .data = &exynos7_ufs_phy, + }, { + .compatible = "samsung,exynosautov9-ufs-phy", + .data = &exynosautov9_ufs_phy, + }, { + .compatible = "tesla,fsd-ufs-phy", + .data = &fsd_ufs_phy, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, samsung_ufs_phy_match); + +static struct platform_driver samsung_ufs_phy_driver = { + .probe = samsung_ufs_phy_probe, + .driver = { + .name = "samsung-ufs-phy", + .of_match_table = samsung_ufs_phy_match, + }, +}; +module_platform_driver(samsung_ufs_phy_driver); +MODULE_DESCRIPTION("Samsung SoC UFS PHY Driver"); +MODULE_AUTHOR("Seungwon Jeon <essuuj@gmail.com>"); +MODULE_AUTHOR("Alim Akhtar <alim.akhtar@samsung.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/samsung/phy-samsung-ufs.h b/drivers/phy/samsung/phy-samsung-ufs.h new file mode 100644 index 000000000000..e122960cfee8 --- /dev/null +++ b/drivers/phy/samsung/phy-samsung-ufs.h @@ -0,0 +1,146 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * UFS PHY driver for Samsung EXYNOS SoC + * + * Copyright (C) 2020 Samsung Electronics Co., Ltd. + * Author: Seungwon Jeon <essuuj@gmail.com> + * Author: Alim Akhtar <alim.akhtar@samsung.com> + * + */ +#ifndef _PHY_SAMSUNG_UFS_ +#define _PHY_SAMSUNG_UFS_ + +#include <linux/phy/phy.h> +#include <linux/regmap.h> + +#define PHY_COMN_BLK 1 +#define PHY_TRSV_BLK 2 +#define END_UFS_PHY_CFG { 0 } +#define PHY_TRSV_CH_OFFSET 0x30 +#define PHY_APB_ADDR(off) ((off) << 2) + +#define PHY_COMN_REG_CFG(o, v, d) { \ + .off_0 = PHY_APB_ADDR((o)), \ + .off_1 = 0, \ + .val = (v), \ + .desc = (d), \ + .id = PHY_COMN_BLK, \ +} + +#define PHY_TRSV_REG_CFG_OFFSET(o, v, d, c) { \ + .off_0 = PHY_APB_ADDR((o)), \ + .off_1 = PHY_APB_ADDR((o) + (c)), \ + .val = (v), \ + .desc = (d), \ + .id = PHY_TRSV_BLK, \ +} + +#define PHY_TRSV_REG_CFG(o, v, d) \ + PHY_TRSV_REG_CFG_OFFSET(o, v, d, PHY_TRSV_CH_OFFSET) + +/* UFS PHY registers */ +#define PHY_PLL_LOCK_STATUS 0x1e + +#define PHY_PLL_LOCK_BIT BIT(5) +#define PHY_CDR_LOCK_BIT BIT(4) + +/* description for PHY calibration */ +enum { + /* applicable to any */ + PWR_DESC_ANY = 0, + /* mode */ + PWR_DESC_PWM = 1, + PWR_DESC_HS = 2, + /* series */ + PWR_DESC_SER_A = 1, + PWR_DESC_SER_B = 2, + /* gear */ + PWR_DESC_G1 = 1, + PWR_DESC_G2 = 2, + PWR_DESC_G3 = 3, + /* field mask */ + MD_MASK = 0x3, + SR_MASK = 0x3, + GR_MASK = 0x7, +}; + +#define PWR_MODE_HS_G1_ANY PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_ANY) +#define PWR_MODE_HS_G1_SER_A PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_A) +#define PWR_MODE_HS_G1_SER_B PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_B) +#define PWR_MODE_HS_G2_ANY PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_ANY) +#define PWR_MODE_HS_G2_SER_A PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_A) +#define PWR_MODE_HS_G2_SER_B PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_B) +#define PWR_MODE_HS_G3_ANY PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_ANY) +#define PWR_MODE_HS_G3_SER_A PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_A) +#define PWR_MODE_HS_G3_SER_B PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_B) +#define PWR_MODE(g, s, m) ((((g) & GR_MASK) << 4) |\ + (((s) & SR_MASK) << 2) | ((m) & MD_MASK)) +#define PWR_MODE_PWM_ANY PWR_MODE(PWR_DESC_ANY,\ + PWR_DESC_ANY, PWR_DESC_PWM) +#define PWR_MODE_HS(g, s) ((((g) & GR_MASK) << 4) |\ + (((s) & SR_MASK) << 2) | PWR_DESC_HS) +#define PWR_MODE_HS_ANY PWR_MODE(PWR_DESC_ANY,\ + PWR_DESC_ANY, PWR_DESC_HS) +#define PWR_MODE_ANY PWR_MODE(PWR_DESC_ANY,\ + PWR_DESC_ANY, PWR_DESC_ANY) +/* PHY calibration point/state */ +enum { + CFG_PRE_INIT, + CFG_POST_INIT, + CFG_PRE_PWR_HS, + CFG_POST_PWR_HS, + CFG_TAG_MAX, +}; + +struct samsung_ufs_phy_cfg { + u32 off_0; + u32 off_1; + u32 val; + u8 desc; + u8 id; +}; + +struct samsung_ufs_phy_pmu_isol { + u32 offset; + u32 mask; + u32 en; +}; + +struct samsung_ufs_phy_drvdata { + const struct samsung_ufs_phy_cfg **cfgs; + struct samsung_ufs_phy_pmu_isol isol; + const char * const *clk_list; + int num_clks; + u32 cdr_lock_status_offset; +}; + +struct samsung_ufs_phy { + struct device *dev; + void __iomem *reg_pma; + struct regmap *reg_pmu; + struct clk_bulk_data *clks; + const struct samsung_ufs_phy_drvdata *drvdata; + const struct samsung_ufs_phy_cfg * const *cfgs; + struct samsung_ufs_phy_pmu_isol isol; + u8 lane_cnt; + int ufs_phy_state; + enum phy_mode mode; +}; + +static inline struct samsung_ufs_phy *get_samsung_ufs_phy(struct phy *phy) +{ + return (struct samsung_ufs_phy *)phy_get_drvdata(phy); +} + +static inline void samsung_ufs_phy_ctrl_isol( + struct samsung_ufs_phy *phy, u32 isol) +{ + regmap_update_bits(phy->reg_pmu, phy->isol.offset, + phy->isol.mask, isol ? 0 : phy->isol.en); +} + +extern const struct samsung_ufs_phy_drvdata exynos7_ufs_phy; +extern const struct samsung_ufs_phy_drvdata exynosautov9_ufs_phy; +extern const struct samsung_ufs_phy_drvdata fsd_ufs_phy; + +#endif /* _PHY_SAMSUNG_UFS_ */ diff --git a/drivers/phy/samsung/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c index 090aa02e02de..ec2befabeea6 100644 --- a/drivers/phy/samsung/phy-samsung-usb2.c +++ b/drivers/phy/samsung/phy-samsung-usb2.c @@ -127,6 +127,10 @@ static const struct of_device_id samsung_usb2_phy_of_match[] = { .compatible = "samsung,exynos5250-usb2-phy", .data = &exynos5250_usb2_phy_config, }, + { + .compatible = "samsung,exynos5420-usb2-phy", + .data = &exynos5420_usb2_phy_config, + }, #endif #ifdef CONFIG_PHY_S5PV210_USB2 { @@ -143,7 +147,6 @@ static int samsung_usb2_phy_probe(struct platform_device *pdev) const struct samsung_usb2_phy_config *cfg; struct device *dev = &pdev->dev; struct phy_provider *phy_provider; - struct resource *mem; struct samsung_usb2_phy_driver *drv; int i, ret; @@ -167,8 +170,7 @@ static int samsung_usb2_phy_probe(struct platform_device *pdev) drv->cfg = cfg; drv->dev = dev; - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - drv->reg_phy = devm_ioremap_resource(dev, mem); + drv->reg_phy = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(drv->reg_phy)) { dev_err(dev, "Failed to map register memory (phy)\n"); return PTR_ERR(drv->reg_phy); @@ -255,7 +257,7 @@ static struct platform_driver samsung_usb2_phy_driver = { }; module_platform_driver(samsung_usb2_phy_driver); -MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC USB PHY driver"); +MODULE_DESCRIPTION("Samsung S5P/Exynos SoC USB PHY driver"); MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:samsung-usb2-phy"); diff --git a/drivers/phy/samsung/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h index 2c1a7d71142b..ebaf43bfc5a2 100644 --- a/drivers/phy/samsung/phy-samsung-usb2.h +++ b/drivers/phy/samsung/phy-samsung-usb2.h @@ -43,7 +43,7 @@ struct samsung_usb2_phy_driver { struct regmap *reg_pmu; struct regmap *reg_sys; spinlock_t lock; - struct samsung_usb2_phy_instance instances[0]; + struct samsung_usb2_phy_instance instances[]; }; struct samsung_usb2_common_phy { @@ -66,5 +66,6 @@ extern const struct samsung_usb2_phy_config exynos3250_usb2_phy_config; extern const struct samsung_usb2_phy_config exynos4210_usb2_phy_config; extern const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config; extern const struct samsung_usb2_phy_config exynos5250_usb2_phy_config; +extern const struct samsung_usb2_phy_config exynos5420_usb2_phy_config; extern const struct samsung_usb2_phy_config s5pv210_usb2_phy_config; #endif |