1 files changed, 266 insertions, 108 deletions

diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
index 68ce4a082b9b..edd6859afba8 100644
--- a/drivers/phy/ti/phy-ti-pipe3.c
+++ b/drivers/phy/ti/phy-ti-pipe3.c
@@ -1,19 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * phy-ti-pipe3 - PIPE3 PHY driver.
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
  * Author: Kishon Vijay Abraham I <kishon@ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/module.h>
@@ -56,51 +46,73 @@
 
 #define SATA_PLL_SOFT_RESET	BIT(18)
 
-#define PIPE3_PHY_PWRCTL_CLK_CMD_MASK	0x003FC000
+#define PIPE3_PHY_PWRCTL_CLK_CMD_MASK	GENMASK(21, 14)
 #define PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT	14
 
-#define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK	0xFFC00000
+#define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK	GENMASK(31, 22)
 #define PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT	22
 
-#define PIPE3_PHY_TX_RX_POWERON		0x3
-#define PIPE3_PHY_TX_RX_POWEROFF	0x0
+#define PIPE3_PHY_RX_POWERON       (0x1 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT)
+#define PIPE3_PHY_TX_POWERON       (0x2 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT)
 
 #define PCIE_PCS_MASK			0xFF0000
 #define PCIE_PCS_DELAY_COUNT_SHIFT	0x10
 
-#define PCIEPHYRX_ANA_PROGRAMMABILITY	0x0000000C
+#define PIPE3_PHY_RX_ANA_PROGRAMMABILITY	0x0000000C
 #define INTERFACE_MASK			GENMASK(31, 27)
 #define INTERFACE_SHIFT			27
+#define INTERFACE_MODE_USBSS		BIT(4)
+#define INTERFACE_MODE_SATA_1P5		BIT(3)
+#define INTERFACE_MODE_SATA_3P0		BIT(2)
+#define INTERFACE_MODE_PCIE		BIT(0)
+
 #define LOSD_MASK			GENMASK(17, 14)
 #define LOSD_SHIFT			14
 #define MEM_PLLDIV			GENMASK(6, 5)
 
-#define PCIEPHYRX_TRIM			0x0000001C
-#define MEM_DLL_TRIM_SEL		GENMASK(31, 30)
+#define PIPE3_PHY_RX_TRIM		0x0000001C
+#define MEM_DLL_TRIM_SEL_MASK		GENMASK(31, 30)
 #define MEM_DLL_TRIM_SHIFT		30
 
-#define PCIEPHYRX_DLL			0x00000024
-#define MEM_DLL_PHINT_RATE		GENMASK(31, 30)
+#define PIPE3_PHY_RX_DLL		0x00000024
+#define MEM_DLL_PHINT_RATE_MASK		GENMASK(31, 30)
+#define MEM_DLL_PHINT_RATE_SHIFT	30
 
-#define PCIEPHYRX_DIGITAL_MODES		0x00000028
+#define PIPE3_PHY_RX_DIGITAL_MODES		0x00000028
+#define MEM_HS_RATE_MASK		GENMASK(28, 27)
+#define MEM_HS_RATE_SHIFT		27
+#define MEM_OVRD_HS_RATE		BIT(26)
+#define MEM_OVRD_HS_RATE_SHIFT		26
 #define MEM_CDR_FASTLOCK		BIT(23)
-#define MEM_CDR_LBW			GENMASK(22, 21)
-#define MEM_CDR_STEPCNT			GENMASK(20, 19)
+#define MEM_CDR_FASTLOCK_SHIFT		23
+#define MEM_CDR_LBW_MASK		GENMASK(22, 21)
+#define MEM_CDR_LBW_SHIFT		21
+#define MEM_CDR_STEPCNT_MASK		GENMASK(20, 19)
+#define MEM_CDR_STEPCNT_SHIFT		19
 #define MEM_CDR_STL_MASK		GENMASK(18, 16)
 #define MEM_CDR_STL_SHIFT		16
 #define MEM_CDR_THR_MASK		GENMASK(15, 13)
 #define MEM_CDR_THR_SHIFT		13
 #define MEM_CDR_THR_MODE		BIT(12)
-#define MEM_CDR_CDR_2NDO_SDM_MODE	BIT(11)
-#define MEM_OVRD_HS_RATE		BIT(26)
-
-#define PCIEPHYRX_EQUALIZER		0x00000038
-#define MEM_EQLEV			GENMASK(31, 16)
-#define MEM_EQFTC			GENMASK(15, 11)
-#define MEM_EQCTL			GENMASK(10, 7)
+#define MEM_CDR_THR_MODE_SHIFT		12
+#define MEM_CDR_2NDO_SDM_MODE		BIT(11)
+#define MEM_CDR_2NDO_SDM_MODE_SHIFT	11
+
+#define PIPE3_PHY_RX_EQUALIZER		0x00000038
+#define MEM_EQLEV_MASK			GENMASK(31, 16)
+#define MEM_EQLEV_SHIFT			16
+#define MEM_EQFTC_MASK			GENMASK(15, 11)
+#define MEM_EQFTC_SHIFT			11
+#define MEM_EQCTL_MASK			GENMASK(10, 7)
 #define MEM_EQCTL_SHIFT			7
 #define MEM_OVRD_EQLEV			BIT(2)
+#define MEM_OVRD_EQLEV_SHIFT		2
 #define MEM_OVRD_EQFTC			BIT(1)
+#define MEM_OVRD_EQFTC_SHIFT		1
+
+#define SATA_PHY_RX_IO_AND_A2D_OVERRIDES	0x44
+#define MEM_CDR_LOS_SOURCE_MASK		GENMASK(10, 9)
+#define MEM_CDR_LOS_SOURCE_SHIFT	9
 
 /*
  * This is an Empirical value that works, need to confirm the actual
@@ -110,6 +122,10 @@
 #define PLL_IDLE_TIME	100	/* in milliseconds */
 #define PLL_LOCK_TIME	100	/* in milliseconds */
 
+enum pipe3_mode { PIPE3_MODE_PCIE = 1,
+		  PIPE3_MODE_SATA,
+		  PIPE3_MODE_USBSS };
+
 struct pipe3_dpll_params {
 	u16	m;
 	u8	n;
@@ -123,6 +139,27 @@ struct pipe3_dpll_map {
 	struct pipe3_dpll_params params;
 };
 
+struct pipe3_settings {
+	u8 ana_interface;
+	u8 ana_losd;
+	u8 dig_fastlock;
+	u8 dig_lbw;
+	u8 dig_stepcnt;
+	u8 dig_stl;
+	u8 dig_thr;
+	u8 dig_thr_mode;
+	u8 dig_2ndo_sdm_mode;
+	u8 dig_hs_rate;
+	u8 dig_ovrd_hs_rate;
+	u8 dll_trim_sel;
+	u8 dll_phint_rate;
+	u8 eq_lev;
+	u8 eq_ftc;
+	u8 eq_ctl;
+	u8 eq_ovrd_lev;
+	u8 eq_ovrd_ftc;
+};
+
 struct ti_pipe3 {
 	void __iomem		*pll_ctrl_base;
 	void __iomem		*phy_rx;
@@ -141,6 +178,8 @@ struct ti_pipe3 {
 	unsigned int		power_reg; /* power reg. index within syscon */
 	unsigned int		pcie_pcs_reg; /* pcs reg. index in syscon */
 	bool			sata_refclk_enabled;
+	enum pipe3_mode		mode;
+	struct pipe3_settings	settings;
 };
 
 static struct pipe3_dpll_map dpll_map_usb[] = {
@@ -163,6 +202,89 @@ static struct pipe3_dpll_map dpll_map_sata[] = {
 	{ },					/* Terminator */
 };
 
+struct pipe3_data {
+	enum pipe3_mode mode;
+	struct pipe3_dpll_map *dpll_map;
+	struct pipe3_settings settings;
+};
+
+static struct pipe3_data data_usb = {
+	.mode = PIPE3_MODE_USBSS,
+	.dpll_map = dpll_map_usb,
+	.settings = {
+	/* DRA75x TRM Table 26-17 Preferred USB3_PHY_RX SCP Register Settings */
+		.ana_interface = INTERFACE_MODE_USBSS,
+		.ana_losd = 0xa,
+		.dig_fastlock = 1,
+		.dig_lbw = 3,
+		.dig_stepcnt = 0,
+		.dig_stl = 0x3,
+		.dig_thr = 1,
+		.dig_thr_mode = 1,
+		.dig_2ndo_sdm_mode = 0,
+		.dig_hs_rate = 0,
+		.dig_ovrd_hs_rate = 1,
+		.dll_trim_sel = 0x2,
+		.dll_phint_rate = 0x3,
+		.eq_lev = 0,
+		.eq_ftc = 0,
+		.eq_ctl = 0x9,
+		.eq_ovrd_lev = 0,
+		.eq_ovrd_ftc = 0,
+	},
+};
+
+static struct pipe3_data data_sata = {
+	.mode = PIPE3_MODE_SATA,
+	.dpll_map = dpll_map_sata,
+	.settings = {
+	/* DRA75x TRM Table 26-9 Preferred SATA_PHY_RX SCP Register Settings */
+		.ana_interface = INTERFACE_MODE_SATA_3P0,
+		.ana_losd = 0x5,
+		.dig_fastlock = 1,
+		.dig_lbw = 3,
+		.dig_stepcnt = 0,
+		.dig_stl = 0x3,
+		.dig_thr = 1,
+		.dig_thr_mode = 1,
+		.dig_2ndo_sdm_mode = 0,
+		.dig_hs_rate = 0,	/* Not in TRM preferred settings */
+		.dig_ovrd_hs_rate = 0,	/* Not in TRM preferred settings */
+		.dll_trim_sel = 0x1,
+		.dll_phint_rate = 0x2,	/* for 1.5 GHz DPLL clock */
+		.eq_lev = 0,
+		.eq_ftc = 0x1f,
+		.eq_ctl = 0,
+		.eq_ovrd_lev = 1,
+		.eq_ovrd_ftc = 1,
+	},
+};
+
+static struct pipe3_data data_pcie = {
+	.mode = PIPE3_MODE_PCIE,
+	.settings = {
+	/* DRA75x TRM Table 26-62 Preferred PCIe_PHY_RX SCP Register Settings */
+		.ana_interface = INTERFACE_MODE_PCIE,
+		.ana_losd = 0xa,
+		.dig_fastlock = 1,
+		.dig_lbw = 3,
+		.dig_stepcnt = 0,
+		.dig_stl = 0x3,
+		.dig_thr = 1,
+		.dig_thr_mode = 1,
+		.dig_2ndo_sdm_mode = 0,
+		.dig_hs_rate = 0,
+		.dig_ovrd_hs_rate = 0,
+		.dll_trim_sel = 0x2,
+		.dll_phint_rate = 0x3,
+		.eq_lev = 0,
+		.eq_ftc = 0x1f,
+		.eq_ctl = 1,
+		.eq_ovrd_lev = 0,
+		.eq_ovrd_ftc = 0,
+	},
+};
+
 static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset)
 {
 	return __raw_readl(addr + offset);
@@ -196,7 +318,6 @@ static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy);
 
 static int ti_pipe3_power_off(struct phy *x)
 {
-	u32 val;
 	int ret;
 	struct ti_pipe3 *phy = phy_get_drvdata(x);
 
@@ -205,13 +326,13 @@ static int ti_pipe3_power_off(struct phy *x)
 		return 0;
 	}
 
-	val = PIPE3_PHY_TX_RX_POWEROFF << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
-
 	ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
-				 PIPE3_PHY_PWRCTL_CLK_CMD_MASK, val);
+				 PIPE3_PHY_PWRCTL_CLK_CMD_MASK, 0);
 	return ret;
 }
 
+static void ti_pipe3_calibrate(struct ti_pipe3 *phy);
+
 static int ti_pipe3_power_on(struct phy *x)
 {
 	u32 val;
@@ -219,6 +340,7 @@ static int ti_pipe3_power_on(struct phy *x)
 	int ret;
 	unsigned long rate;
 	struct ti_pipe3 *phy = phy_get_drvdata(x);
+	bool rx_pending = false;
 
 	if (!phy->phy_power_syscon) {
 		omap_control_phy_power(phy->control_dev, 1);
@@ -231,14 +353,35 @@ static int ti_pipe3_power_on(struct phy *x)
 		return -EINVAL;
 	}
 	rate = rate / 1000000;
-	mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
-		  OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK;
-	val = PIPE3_PHY_TX_RX_POWERON << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
-	val |= rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
-
+	mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK;
+	val = rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
 	ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
 				 mask, val);
-	return ret;
+	/*
+	 * For PCIe, TX and RX must be powered on simultaneously.
+	 * For USB and SATA, TX must be powered on before RX
+	 */
+	mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
+	if (phy->mode == PIPE3_MODE_SATA || phy->mode == PIPE3_MODE_USBSS) {
+		val = PIPE3_PHY_TX_POWERON;
+		rx_pending = true;
+	} else {
+		val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON;
+	}
+
+	regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
+			   mask, val);
+
+	if (rx_pending) {
+		val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON;
+		regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
+				   mask, val);
+	}
+
+	if (phy->mode == PIPE3_MODE_PCIE)
+		ti_pipe3_calibrate(phy);
+
+	return 0;
 }
 
 static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy)
@@ -300,32 +443,55 @@ static int ti_pipe3_dpll_program(struct ti_pipe3 *phy)
 static void ti_pipe3_calibrate(struct ti_pipe3 *phy)
 {
 	u32 val;
+	struct pipe3_settings *s = &phy->settings;
 
-	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_ANA_PROGRAMMABILITY);
+	val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY);
 	val &= ~(INTERFACE_MASK | LOSD_MASK | MEM_PLLDIV);
-	val = (0x1 << INTERFACE_SHIFT | 0xA << LOSD_SHIFT);
-	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_ANA_PROGRAMMABILITY, val);
-
-	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_DIGITAL_MODES);
-	val &= ~(MEM_CDR_STEPCNT | MEM_CDR_STL_MASK | MEM_CDR_THR_MASK |
-		 MEM_CDR_CDR_2NDO_SDM_MODE | MEM_OVRD_HS_RATE);
-	val |= (MEM_CDR_FASTLOCK | MEM_CDR_LBW | 0x3 << MEM_CDR_STL_SHIFT |
-		0x1 << MEM_CDR_THR_SHIFT | MEM_CDR_THR_MODE);
-	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_DIGITAL_MODES, val);
-
-	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_TRIM);
-	val &= ~MEM_DLL_TRIM_SEL;
-	val |= 0x2 << MEM_DLL_TRIM_SHIFT;
-	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_TRIM, val);
-
-	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_DLL);
-	val |= MEM_DLL_PHINT_RATE;
-	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_DLL, val);
-
-	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_EQUALIZER);
-	val &= ~(MEM_EQLEV | MEM_EQCTL | MEM_OVRD_EQLEV | MEM_OVRD_EQFTC);
-	val |= MEM_EQFTC | 0x1 << MEM_EQCTL_SHIFT;
-	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_EQUALIZER, val);
+	val |= (s->ana_interface << INTERFACE_SHIFT | s->ana_losd << LOSD_SHIFT);
+	ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY, val);
+
+	val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES);
+	val &= ~(MEM_HS_RATE_MASK | MEM_OVRD_HS_RATE | MEM_CDR_FASTLOCK |
+		 MEM_CDR_LBW_MASK | MEM_CDR_STEPCNT_MASK | MEM_CDR_STL_MASK |
+		 MEM_CDR_THR_MASK | MEM_CDR_THR_MODE | MEM_CDR_2NDO_SDM_MODE);
+	val |= s->dig_hs_rate << MEM_HS_RATE_SHIFT |
+		s->dig_ovrd_hs_rate << MEM_OVRD_HS_RATE_SHIFT |
+		s->dig_fastlock << MEM_CDR_FASTLOCK_SHIFT |
+		s->dig_lbw << MEM_CDR_LBW_SHIFT |
+		s->dig_stepcnt << MEM_CDR_STEPCNT_SHIFT |
+		s->dig_stl << MEM_CDR_STL_SHIFT |
+		s->dig_thr << MEM_CDR_THR_SHIFT |
+		s->dig_thr_mode << MEM_CDR_THR_MODE_SHIFT |
+		s->dig_2ndo_sdm_mode << MEM_CDR_2NDO_SDM_MODE_SHIFT;
+	ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES, val);
+
+	val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_TRIM);
+	val &= ~MEM_DLL_TRIM_SEL_MASK;
+	val |= s->dll_trim_sel << MEM_DLL_TRIM_SHIFT;
+	ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_TRIM, val);
+
+	val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DLL);
+	val &= ~MEM_DLL_PHINT_RATE_MASK;
+	val |= s->dll_phint_rate << MEM_DLL_PHINT_RATE_SHIFT;
+	ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DLL, val);
+
+	val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER);
+	val &= ~(MEM_EQLEV_MASK | MEM_EQFTC_MASK | MEM_EQCTL_MASK |
+		 MEM_OVRD_EQLEV | MEM_OVRD_EQFTC);
+	val |= s->eq_lev << MEM_EQLEV_SHIFT |
+		s->eq_ftc << MEM_EQFTC_SHIFT |
+		s->eq_ctl << MEM_EQCTL_SHIFT |
+		s->eq_ovrd_lev << MEM_OVRD_EQLEV_SHIFT |
+		s->eq_ovrd_ftc << MEM_OVRD_EQFTC_SHIFT;
+	ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER, val);
+
+	if (phy->mode == PIPE3_MODE_SATA) {
+		val = ti_pipe3_readl(phy->phy_rx,
+				     SATA_PHY_RX_IO_AND_A2D_OVERRIDES);
+		val &= ~MEM_CDR_LOS_SOURCE_MASK;
+		ti_pipe3_writel(phy->phy_rx, SATA_PHY_RX_IO_AND_A2D_OVERRIDES,
+				val);
+	}
 }
 
 static int ti_pipe3_init(struct phy *x)
@@ -340,7 +506,7 @@ static int ti_pipe3_init(struct phy *x)
 	 * as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
 	 * 18-1804.
 	 */
-	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
+	if (phy->mode == PIPE3_MODE_PCIE) {
 		if (!phy->pcs_syscon) {
 			omap_control_pcie_pcs(phy->control_dev, 0x96);
 			return 0;
@@ -349,12 +515,7 @@ static int ti_pipe3_init(struct phy *x)
 		val = 0x96 << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT;
 		ret = regmap_update_bits(phy->pcs_syscon, phy->pcie_pcs_reg,
 					 PCIE_PCS_MASK, val);
-		if (ret)
-			return ret;
-
-		ti_pipe3_calibrate(phy);
-
-		return 0;
+		return ret;
 	}
 
 	/* Bring it out of IDLE if it is IDLE */
@@ -367,8 +528,7 @@ static int ti_pipe3_init(struct phy *x)
 
 	/* SATA has issues if re-programmed when locked */
 	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
-	if ((val & PLL_LOCK) && of_device_is_compatible(phy->dev->of_node,
-							"ti,phy-pipe3-sata"))
+	if ((val & PLL_LOCK) && phy->mode == PIPE3_MODE_SATA)
 		return ret;
 
 	/* Program the DPLL */
@@ -378,6 +538,8 @@ static int ti_pipe3_init(struct phy *x)
 		return -EINVAL;
 	}
 
+	ti_pipe3_calibrate(phy);
+
 	return ret;
 }
 
@@ -390,12 +552,11 @@ static int ti_pipe3_exit(struct phy *x)
 	/* If dpll_reset_syscon is not present we wont power down SATA DPLL
 	 * due to Errata i783
 	 */
-	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") &&
-	    !phy->dpll_reset_syscon)
+	if (phy->mode == PIPE3_MODE_SATA && !phy->dpll_reset_syscon)
 		return 0;
 
 	/* PCIe doesn't have internal DPLL */
-	if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
+	if (phy->mode != PIPE3_MODE_PCIE) {
 		/* Put DPLL in IDLE mode */
 		val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
 		val |= PLL_IDLE;
@@ -418,7 +579,7 @@ static int ti_pipe3_exit(struct phy *x)
 	}
 
 	/* i783: SATA needs control bit toggle after PLL unlock */
-	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata")) {
+	if (phy->mode == PIPE3_MODE_SATA) {
 		regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
 				   SATA_PLL_SOFT_RESET, SATA_PLL_SOFT_RESET);
 		regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
@@ -443,7 +604,6 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
 {
 	struct clk *clk;
 	struct device *dev = phy->dev;
-	struct device_node *node = dev->of_node;
 
 	phy->refclk = devm_clk_get(dev, "refclk");
 	if (IS_ERR(phy->refclk)) {
@@ -451,11 +611,11 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
 		/* older DTBs have missing refclk in SATA PHY
 		 * so don't bail out in case of SATA PHY.
 		 */
-		if (!of_device_is_compatible(node, "ti,phy-pipe3-sata"))
+		if (phy->mode != PIPE3_MODE_SATA)
 			return PTR_ERR(phy->refclk);
 	}
 
-	if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
+	if (phy->mode != PIPE3_MODE_SATA) {
 		phy->wkupclk = devm_clk_get(dev, "wkupclk");
 		if (IS_ERR(phy->wkupclk)) {
 			dev_err(dev, "unable to get wkupclk\n");
@@ -465,8 +625,7 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
 		phy->wkupclk = ERR_PTR(-ENODEV);
 	}
 
-	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie") ||
-	    phy->phy_power_syscon) {
+	if (phy->mode != PIPE3_MODE_PCIE || phy->phy_power_syscon) {
 		phy->sys_clk = devm_clk_get(dev, "sysclk");
 		if (IS_ERR(phy->sys_clk)) {
 			dev_err(dev, "unable to get sysclk\n");
@@ -474,7 +633,7 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
 		}
 	}
 
-	if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
+	if (phy->mode == PIPE3_MODE_PCIE) {
 		clk = devm_clk_get(dev, "dpll_ref");
 		if (IS_ERR(clk)) {
 			dev_err(dev, "unable to get dpll ref clk\n");
@@ -546,7 +705,7 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
 		phy->control_dev = &control_pdev->dev;
 	}
 
-	if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
+	if (phy->mode == PIPE3_MODE_PCIE) {
 		phy->pcs_syscon = syscon_regmap_lookup_by_phandle(node,
 								  "syscon-pcs");
 		if (IS_ERR(phy->pcs_syscon)) {
@@ -564,7 +723,7 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
 		}
 	}
 
-	if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
+	if (phy->mode == PIPE3_MODE_SATA) {
 		phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
 							"syscon-pllreset");
 		if (IS_ERR(phy->dpll_reset_syscon)) {
@@ -589,12 +748,8 @@ static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy)
 {
 	struct resource *res;
 	struct device *dev = phy->dev;
-	struct device_node *node = dev->of_node;
 	struct platform_device *pdev = to_platform_device(dev);
 
-	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie"))
-		return 0;
-
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 					   "phy_rx");
 	phy->phy_rx = devm_ioremap_resource(dev, res);
@@ -611,24 +766,12 @@ static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy)
 static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy)
 {
 	struct resource *res;
-	const struct of_device_id *match;
 	struct device *dev = phy->dev;
-	struct device_node *node = dev->of_node;
 	struct platform_device *pdev = to_platform_device(dev);
 
-	if (of_device_is_compatible(node, "ti,phy-pipe3-pcie"))
+	if (phy->mode == PIPE3_MODE_PCIE)
 		return 0;
 
-	match = of_match_device(ti_pipe3_id_table, dev);
-	if (!match)
-		return -EINVAL;
-
-	phy->dpll_map = (struct pipe3_dpll_map *)match->data;
-	if (!phy->dpll_map) {
-		dev_err(dev, "no DPLL data\n");
-		return -EINVAL;
-	}
-
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 					   "pll_ctrl");
 	phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
@@ -640,15 +783,29 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 	struct ti_pipe3 *phy;
 	struct phy *generic_phy;
 	struct phy_provider *phy_provider;
-	struct device_node *node = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
 	int ret;
+	const struct of_device_id *match;
+	struct pipe3_data *data;
 
 	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
 	if (!phy)
 		return -ENOMEM;
 
-	phy->dev		= dev;
+	match = of_match_device(ti_pipe3_id_table, dev);
+	if (!match)
+		return -EINVAL;
+
+	data = (struct pipe3_data *)match->data;
+	if (!data) {
+		dev_err(dev, "no driver data\n");
+		return -EINVAL;
+	}
+
+	phy->dev = dev;
+	phy->mode = data->mode;
+	phy->dpll_map = data->dpll_map;
+	phy->settings = data->settings;
 
 	ret = ti_pipe3_get_pll_base(phy);
 	if (ret)
@@ -672,7 +829,7 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 	/*
 	 * Prevent auto-disable of refclk for SATA PHY due to Errata i783
 	 */
-	if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
+	if (phy->mode == PIPE3_MODE_SATA) {
 		if (!IS_ERR(phy->refclk)) {
 			clk_prepare_enable(phy->refclk);
 			phy->sata_refclk_enabled = true;
@@ -762,18 +919,19 @@ static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
 static const struct of_device_id ti_pipe3_id_table[] = {
 	{
 		.compatible = "ti,phy-usb3",
-		.data = dpll_map_usb,
+		.data = &data_usb,
 	},
 	{
 		.compatible = "ti,omap-usb3",
-		.data = dpll_map_usb,
+		.data = &data_usb,
 	},
 	{
 		.compatible = "ti,phy-pipe3-sata",
-		.data = dpll_map_sata,
+		.data = &data_sata,
 	},
 	{
 		.compatible = "ti,phy-pipe3-pcie",
+		.data = &data_pcie,
 	},
 	{}
 };