diff options
Diffstat (limited to 'drivers/platform/x86/intel_cht_int33fe_typec.c')
| -rw-r--r-- | drivers/platform/x86/intel_cht_int33fe_typec.c | 354 |
1 files changed, 354 insertions, 0 deletions
diff --git a/drivers/platform/x86/intel_cht_int33fe_typec.c b/drivers/platform/x86/intel_cht_int33fe_typec.c new file mode 100644 index 000000000000..2d097fc2dd46 --- /dev/null +++ b/drivers/platform/x86/intel_cht_int33fe_typec.c @@ -0,0 +1,354 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Cherry Trail ACPI INT33FE pseudo device driver + * + * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com> + * + * Some Intel Cherry Trail based device which ship with Windows 10, have + * this weird INT33FE ACPI device with a CRS table with 4 I2cSerialBusV2 + * resources, for 4 different chips attached to various i2c busses: + * 1. The Whiskey Cove pmic, which is also described by the INT34D3 ACPI device + * 2. Maxim MAX17047 Fuel Gauge Controller + * 3. FUSB302 USB Type-C Controller + * 4. PI3USB30532 USB switch + * + * So this driver is a stub / pseudo driver whose only purpose is to + * instantiate i2c-clients for chips 2 - 4, so that standard i2c drivers + * for these chips can bind to the them. + */ + +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/usb/pd.h> + +#include "intel_cht_int33fe_common.h" + +enum { + INT33FE_NODE_FUSB302, + INT33FE_NODE_MAX17047, + INT33FE_NODE_PI3USB30532, + INT33FE_NODE_DISPLAYPORT, + INT33FE_NODE_USB_CONNECTOR, + INT33FE_NODE_MAX, +}; + +static const struct software_node nodes[]; + +static const struct software_node_ref_args pi3usb30532_ref = { + &nodes[INT33FE_NODE_PI3USB30532] +}; + +static const struct software_node_ref_args dp_ref = { + &nodes[INT33FE_NODE_DISPLAYPORT] +}; + +static struct software_node_ref_args mux_ref; + +static const struct software_node_reference usb_connector_refs[] = { + { "orientation-switch", 1, &pi3usb30532_ref}, + { "mode-switch", 1, &pi3usb30532_ref}, + { "displayport", 1, &dp_ref}, + { } +}; + +static const struct software_node_reference fusb302_refs[] = { + { "usb-role-switch", 1, &mux_ref}, + { } +}; + +/* + * Grrr I severly dislike buggy BIOS-es. At least one BIOS enumerates + * the max17047 both through the INT33FE ACPI device (it is right there + * in the resources table) as well as through a separate MAX17047 device. + * + * These helpers are used to work around this by checking if an i2c-client + * for the max17047 has already been registered. + */ +static int cht_int33fe_check_for_max17047(struct device *dev, void *data) +{ + struct i2c_client **max17047 = data; + struct acpi_device *adev; + const char *hid; + + adev = ACPI_COMPANION(dev); + if (!adev) + return 0; + + hid = acpi_device_hid(adev); + + /* The MAX17047 ACPI node doesn't have an UID, so we don't check that */ + if (strcmp(hid, "MAX17047")) + return 0; + + *max17047 = to_i2c_client(dev); + return 1; +} + +static const char * const max17047_suppliers[] = { "bq24190-charger" }; + +static const struct property_entry max17047_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", max17047_suppliers), + { } +}; + +static const struct property_entry fusb302_props[] = { + PROPERTY_ENTRY_STRING("linux,extcon-name", "cht_wcove_pwrsrc"), + { } +}; + +#define PDO_FIXED_FLAGS \ + (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM) + +static const u32 src_pdo[] = { + PDO_FIXED(5000, 1500, PDO_FIXED_FLAGS), +}; + +static const u32 snk_pdo[] = { + PDO_FIXED(5000, 400, PDO_FIXED_FLAGS), + PDO_VAR(5000, 12000, 3000), +}; + +static const struct property_entry usb_connector_props[] = { + PROPERTY_ENTRY_STRING("data-role", "dual"), + PROPERTY_ENTRY_STRING("power-role", "dual"), + PROPERTY_ENTRY_STRING("try-power-role", "sink"), + PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo), + PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo), + PROPERTY_ENTRY_U32("op-sink-microwatt", 2500000), + { } +}; + +static const struct software_node nodes[] = { + { "fusb302", NULL, fusb302_props, fusb302_refs }, + { "max17047", NULL, max17047_props }, + { "pi3usb30532" }, + { "displayport" }, + { "connector", &nodes[0], usb_connector_props, usb_connector_refs }, + { } +}; + +static int cht_int33fe_setup_dp(struct cht_int33fe_data *data) +{ + struct fwnode_handle *fwnode; + struct pci_dev *pdev; + + fwnode = software_node_fwnode(&nodes[INT33FE_NODE_DISPLAYPORT]); + if (!fwnode) + return -ENODEV; + + /* First let's find the GPU PCI device */ + pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, NULL); + if (!pdev || pdev->vendor != PCI_VENDOR_ID_INTEL) { + pci_dev_put(pdev); + return -ENODEV; + } + + /* Then the DP child device node */ + data->dp = device_get_named_child_node(&pdev->dev, "DD02"); + pci_dev_put(pdev); + if (!data->dp) + return -ENODEV; + + fwnode->secondary = ERR_PTR(-ENODEV); + data->dp->secondary = fwnode; + + return 0; +} + +static void cht_int33fe_remove_nodes(struct cht_int33fe_data *data) +{ + software_node_unregister_nodes(nodes); + + if (mux_ref.node) { + fwnode_handle_put(software_node_fwnode(mux_ref.node)); + mux_ref.node = NULL; + } + + if (data->dp) { + data->dp->secondary = NULL; + fwnode_handle_put(data->dp); + data->dp = NULL; + } +} + +static int cht_int33fe_add_nodes(struct cht_int33fe_data *data) +{ + int ret; + + ret = software_node_register_nodes(nodes); + if (ret) + return ret; + + /* The devices that are not created in this driver need extra steps. */ + + /* + * There is no ACPI device node for the USB role mux, so we need to wait + * until the mux driver has created software node for the mux device. + * It means we depend on the mux driver. This function will return + * -EPROBE_DEFER until the mux device is registered. + */ + mux_ref.node = software_node_find_by_name(NULL, "intel-xhci-usb-sw"); + if (!mux_ref.node) { + ret = -EPROBE_DEFER; + goto err_remove_nodes; + } + + /* + * The DP connector does have ACPI device node. In this case we can just + * find that ACPI node and assign our node as the secondary node to it. + */ + ret = cht_int33fe_setup_dp(data); + if (ret) + goto err_remove_nodes; + + return 0; + +err_remove_nodes: + cht_int33fe_remove_nodes(data); + + return ret; +} + +static int +cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data) +{ + struct i2c_client *max17047 = NULL; + struct i2c_board_info board_info; + struct fwnode_handle *fwnode; + int ret; + + fwnode = software_node_fwnode(&nodes[INT33FE_NODE_MAX17047]); + if (!fwnode) + return -ENODEV; + + i2c_for_each_dev(&max17047, cht_int33fe_check_for_max17047); + if (max17047) { + /* Pre-existing i2c-client for the max17047, add device-props */ + fwnode->secondary = ERR_PTR(-ENODEV); + max17047->dev.fwnode->secondary = fwnode; + /* And re-probe to get the new device-props applied. */ + ret = device_reprobe(&max17047->dev); + if (ret) + dev_warn(dev, "Reprobing max17047 error: %d\n", ret); + return 0; + } + + memset(&board_info, 0, sizeof(board_info)); + strlcpy(board_info.type, "max17047", I2C_NAME_SIZE); + board_info.dev_name = "max17047"; + board_info.fwnode = fwnode; + data->battery_fg = i2c_acpi_new_device(dev, 1, &board_info); + + return PTR_ERR_OR_ZERO(data->battery_fg); +} + +int cht_int33fe_typec_probe(struct cht_int33fe_data *data) +{ + struct device *dev = data->dev; + struct i2c_board_info board_info; + struct fwnode_handle *fwnode; + struct regulator *regulator; + int fusb302_irq; + int ret; + + /* + * We expect the WC PMIC to be paired with a TI bq24292i charger-IC. + * We check for the bq24292i vbus regulator here, this has 2 purposes: + * 1) The bq24292i allows charging with up to 12V, setting the fusb302's + * max-snk voltage to 12V with another charger-IC is not good. + * 2) For the fusb302 driver to get the bq24292i vbus regulator, the + * regulator-map, which is part of the bq24292i regulator_init_data, + * must be registered before the fusb302 is instantiated, otherwise + * it will end up with a dummy-regulator. + * Note "cht_wc_usb_typec_vbus" comes from the regulator_init_data + * which is defined in i2c-cht-wc.c from where the bq24292i i2c-client + * gets instantiated. We use regulator_get_optional here so that we + * don't end up getting a dummy-regulator ourselves. + */ + regulator = regulator_get_optional(dev, "cht_wc_usb_typec_vbus"); + if (IS_ERR(regulator)) { + ret = PTR_ERR(regulator); + return (ret == -ENODEV) ? -EPROBE_DEFER : ret; + } + regulator_put(regulator); + + /* The FUSB302 uses the irq at index 1 and is the only irq user */ + fusb302_irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 1); + if (fusb302_irq < 0) { + if (fusb302_irq != -EPROBE_DEFER) + dev_err(dev, "Error getting FUSB302 irq\n"); + return fusb302_irq; + } + + ret = cht_int33fe_add_nodes(data); + if (ret) + return ret; + + /* Work around BIOS bug, see comment on cht_int33fe_check_for_max17047 */ + ret = cht_int33fe_register_max17047(dev, data); + if (ret) + goto out_remove_nodes; + + fwnode = software_node_fwnode(&nodes[INT33FE_NODE_FUSB302]); + if (!fwnode) { + ret = -ENODEV; + goto out_unregister_max17047; + } + + memset(&board_info, 0, sizeof(board_info)); + strlcpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE); + board_info.dev_name = "fusb302"; + board_info.fwnode = fwnode; + board_info.irq = fusb302_irq; + + data->fusb302 = i2c_acpi_new_device(dev, 2, &board_info); + if (IS_ERR(data->fusb302)) { + ret = PTR_ERR(data->fusb302); + goto out_unregister_max17047; + } + + fwnode = software_node_fwnode(&nodes[INT33FE_NODE_PI3USB30532]); + if (!fwnode) { + ret = -ENODEV; + goto out_unregister_fusb302; + } + + memset(&board_info, 0, sizeof(board_info)); + board_info.dev_name = "pi3usb30532"; + board_info.fwnode = fwnode; + strlcpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE); + + data->pi3usb30532 = i2c_acpi_new_device(dev, 3, &board_info); + if (IS_ERR(data->pi3usb30532)) { + ret = PTR_ERR(data->pi3usb30532); + goto out_unregister_fusb302; + } + + return 0; + +out_unregister_fusb302: + i2c_unregister_device(data->fusb302); + +out_unregister_max17047: + i2c_unregister_device(data->battery_fg); + +out_remove_nodes: + cht_int33fe_remove_nodes(data); + + return ret; +} + +int cht_int33fe_typec_remove(struct cht_int33fe_data *data) +{ + i2c_unregister_device(data->pi3usb30532); + i2c_unregister_device(data->fusb302); + i2c_unregister_device(data->battery_fg); + + cht_int33fe_remove_nodes(data); + + return 0; +} |