diff options
Diffstat (limited to 'drivers/power/isp1704_charger.c')
| -rw-r--r-- | drivers/power/isp1704_charger.c | 201 |
1 files changed, 161 insertions, 40 deletions
diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c index 72512185f3e2..2ad9b14a5ce3 100644 --- a/drivers/power/isp1704_charger.c +++ b/drivers/power/isp1704_charger.c @@ -59,11 +59,61 @@ struct isp1704_charger { struct notifier_block nb; struct work_struct work; - char model[7]; + /* properties */ + char model[8]; unsigned present:1; + unsigned online:1; + unsigned current_max; + + /* temp storage variables */ + unsigned long event; + unsigned max_power; }; /* + * Determine is the charging port DCP (dedicated charger) or CDP (Host/HUB + * chargers). + * + * REVISIT: The method is defined in Battery Charging Specification and is + * applicable to any ULPI transceiver. Nothing isp170x specific here. + */ +static inline int isp1704_charger_type(struct isp1704_charger *isp) +{ + u8 reg; + u8 func_ctrl; + u8 otg_ctrl; + int type = POWER_SUPPLY_TYPE_USB_DCP; + + func_ctrl = otg_io_read(isp->otg, ULPI_FUNC_CTRL); + otg_ctrl = otg_io_read(isp->otg, ULPI_OTG_CTRL); + + /* disable pulldowns */ + reg = ULPI_OTG_CTRL_DM_PULLDOWN | ULPI_OTG_CTRL_DP_PULLDOWN; + otg_io_write(isp->otg, ULPI_CLR(ULPI_OTG_CTRL), reg); + + /* full speed */ + otg_io_write(isp->otg, ULPI_CLR(ULPI_FUNC_CTRL), + ULPI_FUNC_CTRL_XCVRSEL_MASK); + otg_io_write(isp->otg, ULPI_SET(ULPI_FUNC_CTRL), + ULPI_FUNC_CTRL_FULL_SPEED); + + /* Enable strong pull-up on DP (1.5K) and reset */ + reg = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET; + otg_io_write(isp->otg, ULPI_SET(ULPI_FUNC_CTRL), reg); + usleep_range(1000, 2000); + + reg = otg_io_read(isp->otg, ULPI_DEBUG); + if ((reg & 3) != 3) + type = POWER_SUPPLY_TYPE_USB_CDP; + + /* recover original state */ + otg_io_write(isp->otg, ULPI_FUNC_CTRL, func_ctrl); + otg_io_write(isp->otg, ULPI_OTG_CTRL, otg_ctrl); + + return type; +} + +/* * ISP1704 detects PS/2 adapters as charger. To make sure the detected charger * is actually a dedicated charger, the following steps need to be taken. */ @@ -127,16 +177,19 @@ static inline int isp1704_charger_verify(struct isp1704_charger *isp) static inline int isp1704_charger_detect(struct isp1704_charger *isp) { unsigned long timeout; - u8 r; + u8 pwr_ctrl; int ret = 0; + pwr_ctrl = otg_io_read(isp->otg, ISP1704_PWR_CTRL); + /* set SW control bit in PWR_CTRL register */ otg_io_write(isp->otg, ISP1704_PWR_CTRL, ISP1704_PWR_CTRL_SWCTRL); /* enable manual charger detection */ - r = (ISP1704_PWR_CTRL_SWCTRL | ISP1704_PWR_CTRL_DPVSRC_EN); - otg_io_write(isp->otg, ULPI_SET(ISP1704_PWR_CTRL), r); + otg_io_write(isp->otg, ULPI_SET(ISP1704_PWR_CTRL), + ISP1704_PWR_CTRL_SWCTRL + | ISP1704_PWR_CTRL_DPVSRC_EN); usleep_range(1000, 2000); timeout = jiffies + msecs_to_jiffies(300); @@ -147,7 +200,10 @@ static inline int isp1704_charger_detect(struct isp1704_charger *isp) ret = isp1704_charger_verify(isp); break; } - } while (!time_after(jiffies, timeout)); + } while (!time_after(jiffies, timeout) && isp->online); + + /* recover original state */ + otg_io_write(isp->otg, ISP1704_PWR_CTRL, pwr_ctrl); return ret; } @@ -155,52 +211,92 @@ static inline int isp1704_charger_detect(struct isp1704_charger *isp) static void isp1704_charger_work(struct work_struct *data) { int detect; + unsigned long event; + unsigned power; struct isp1704_charger *isp = container_of(data, struct isp1704_charger, work); + static DEFINE_MUTEX(lock); - /* - * FIXME Only supporting dedicated chargers even though isp1704 can - * detect HUB and HOST chargers. If the device has already been - * enumerated, the detection will break the connection. - */ - if (isp->otg->state != OTG_STATE_B_IDLE) - return; + event = isp->event; + power = isp->max_power; - /* disable data pullups */ - if (isp->otg->gadget) - usb_gadget_disconnect(isp->otg->gadget); + mutex_lock(&lock); + + switch (event) { + case USB_EVENT_VBUS: + isp->online = true; + + /* detect charger */ + detect = isp1704_charger_detect(isp); + + if (detect) { + isp->present = detect; + isp->psy.type = isp1704_charger_type(isp); + } - /* detect charger */ - detect = isp1704_charger_detect(isp); - if (detect) { - isp->present = detect; - power_supply_changed(&isp->psy); + switch (isp->psy.type) { + case POWER_SUPPLY_TYPE_USB_DCP: + isp->current_max = 1800; + break; + case POWER_SUPPLY_TYPE_USB_CDP: + /* + * Only 500mA here or high speed chirp + * handshaking may break + */ + isp->current_max = 500; + /* FALLTHROUGH */ + case POWER_SUPPLY_TYPE_USB: + default: + /* enable data pullups */ + if (isp->otg->gadget) + usb_gadget_connect(isp->otg->gadget); + } + break; + case USB_EVENT_NONE: + isp->online = false; + isp->current_max = 0; + isp->present = 0; + isp->current_max = 0; + isp->psy.type = POWER_SUPPLY_TYPE_USB; + + /* + * Disable data pullups. We need to prevent the controller from + * enumerating. + * + * FIXME: This is here to allow charger detection with Host/HUB + * chargers. The pullups may be enabled elsewhere, so this can + * not be the final solution. + */ + if (isp->otg->gadget) + usb_gadget_disconnect(isp->otg->gadget); + break; + case USB_EVENT_ENUMERATED: + if (isp->present) + isp->current_max = 1800; + else + isp->current_max = power; + break; + default: + goto out; } - /* enable data pullups */ - if (isp->otg->gadget) - usb_gadget_connect(isp->otg->gadget); + power_supply_changed(&isp->psy); +out: + mutex_unlock(&lock); } static int isp1704_notifier_call(struct notifier_block *nb, - unsigned long event, void *unused) + unsigned long event, void *power) { struct isp1704_charger *isp = container_of(nb, struct isp1704_charger, nb); - switch (event) { - case USB_EVENT_VBUS: - schedule_work(&isp->work); - break; - case USB_EVENT_NONE: - if (isp->present) { - isp->present = 0; - power_supply_changed(&isp->psy); - } - break; - default: - return NOTIFY_DONE; - } + isp->event = event; + + if (power) + isp->max_power = *((unsigned *)power); + + schedule_work(&isp->work); return NOTIFY_OK; } @@ -216,6 +312,12 @@ static int isp1704_charger_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_PRESENT: val->intval = isp->present; break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = isp->online; + break; + case POWER_SUPPLY_PROP_CURRENT_MAX: + val->intval = isp->current_max; + break; case POWER_SUPPLY_PROP_MODEL_NAME: val->strval = isp->model; break; @@ -230,6 +332,8 @@ static int isp1704_charger_get_property(struct power_supply *psy, static enum power_supply_property power_props[] = { POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_CURRENT_MAX, POWER_SUPPLY_PROP_MODEL_NAME, POWER_SUPPLY_PROP_MANUFACTURER, }; @@ -287,13 +391,13 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev) if (!isp->otg) goto fail0; + isp->dev = &pdev->dev; + platform_set_drvdata(pdev, isp); + ret = isp1704_test_ulpi(isp); if (ret < 0) goto fail1; - isp->dev = &pdev->dev; - platform_set_drvdata(pdev, isp); - isp->psy.name = "isp1704"; isp->psy.type = POWER_SUPPLY_TYPE_USB; isp->psy.properties = power_props; @@ -318,6 +422,23 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev) dev_info(isp->dev, "registered with product id %s\n", isp->model); + /* + * Taking over the D+ pullup. + * + * FIXME: The device will be disconnected if it was already + * enumerated. The charger driver should be always loaded before any + * gadget is loaded. + */ + if (isp->otg->gadget) + usb_gadget_disconnect(isp->otg->gadget); + + /* Detect charger if VBUS is valid (the cable was already plugged). */ + ret = otg_io_read(isp->otg, ULPI_USB_INT_STS); + if ((ret & ULPI_INT_VBUS_VALID) && !isp->otg->default_a) { + isp->event = USB_EVENT_VBUS; + schedule_work(&isp->work); + } + return 0; fail2: power_supply_unregister(&isp->psy); |