aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/power/supply/smb347-charger.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/power/supply/smb347-charger.c')
-rw-r--r--drivers/power/supply/smb347-charger.c692
1 files changed, 376 insertions, 316 deletions
diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c
index f99026d81f2a..d3bf35ed12ce 100644
--- a/drivers/power/supply/smb347-charger.c
+++ b/drivers/power/supply/smb347-charger.c
@@ -16,11 +16,18 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
-#include <linux/mutex.h>
#include <linux/power_supply.h>
-#include <linux/power/smb347-charger.h>
+#include <linux/property.h>
#include <linux/regmap.h>
+#include <dt-bindings/power/summit,smb347-charger.h>
+
+/* Use the default compensation method */
+#define SMB3XX_SOFT_TEMP_COMPENSATE_DEFAULT -1
+
+/* Use default factory programmed value for hard/soft temperature limit */
+#define SMB3XX_TEMP_USE_DEFAULT -273
+
/*
* Configuration registers. These are mirrored to volatile RAM and can be
* written once %CMD_A_ALLOW_WRITE is set in %CMD_A register. They will be
@@ -122,82 +129,140 @@
/**
* struct smb347_charger - smb347 charger instance
- * @lock: protects concurrent access to online variables
* @dev: pointer to device
* @regmap: pointer to driver regmap
* @mains: power_supply instance for AC/DC power
* @usb: power_supply instance for USB power
- * @battery: power_supply instance for battery
+ * @id: SMB charger ID
* @mains_online: is AC/DC input connected
* @usb_online: is USB input connected
* @charging_enabled: is charging enabled
- * @pdata: pointer to platform data
+ * @max_charge_current: maximum current (in uA) the battery can be charged
+ * @max_charge_voltage: maximum voltage (in uV) the battery can be charged
+ * @pre_charge_current: current (in uA) to use in pre-charging phase
+ * @termination_current: current (in uA) used to determine when the
+ * charging cycle terminates
+ * @pre_to_fast_voltage: voltage (in uV) treshold used for transitioning to
+ * pre-charge to fast charge mode
+ * @mains_current_limit: maximum input current drawn from AC/DC input (in uA)
+ * @usb_hc_current_limit: maximum input high current (in uA) drawn from USB
+ * input
+ * @chip_temp_threshold: die temperature where device starts limiting charge
+ * current [%100 - %130] (in degree C)
+ * @soft_cold_temp_limit: soft cold temperature limit [%0 - %15] (in degree C),
+ * granularity is 5 deg C.
+ * @soft_hot_temp_limit: soft hot temperature limit [%40 - %55] (in degree C),
+ * granularity is 5 deg C.
+ * @hard_cold_temp_limit: hard cold temperature limit [%-5 - %10] (in degree C),
+ * granularity is 5 deg C.
+ * @hard_hot_temp_limit: hard hot temperature limit [%50 - %65] (in degree C),
+ * granularity is 5 deg C.
+ * @suspend_on_hard_temp_limit: suspend charging when hard limit is hit
+ * @soft_temp_limit_compensation: compensation method when soft temperature
+ * limit is hit
+ * @charge_current_compensation: current (in uA) for charging compensation
+ * current when temperature hits soft limits
+ * @use_mains: AC/DC input can be used
+ * @use_usb: USB input can be used
+ * @use_usb_otg: USB OTG output can be used (not implemented yet)
+ * @enable_control: how charging enable/disable is controlled
+ * (driver/pin controls)
+ *
+ * @use_main, @use_usb, and @use_usb_otg are means to enable/disable
+ * hardware support for these. This is useful when we want to have for
+ * example OTG charging controlled via OTG transceiver driver and not by
+ * the SMB347 hardware.
+ *
+ * Hard and soft temperature limit values are given as described in the
+ * device data sheet and assuming NTC beta value is %3750. Even if this is
+ * not the case, these values should be used. They can be mapped to the
+ * corresponding NTC beta values with the help of table %2 in the data
+ * sheet. So for example if NTC beta is %3375 and we want to program hard
+ * hot limit to be %53 deg C, @hard_hot_temp_limit should be set to %50.
+ *
+ * If zero value is given in any of the current and voltage values, the
+ * factory programmed default will be used. For soft/hard temperature
+ * values, pass in %SMB3XX_TEMP_USE_DEFAULT instead.
*/
struct smb347_charger {
- struct mutex lock;
struct device *dev;
struct regmap *regmap;
struct power_supply *mains;
struct power_supply *usb;
- struct power_supply *battery;
+ unsigned int id;
bool mains_online;
bool usb_online;
bool charging_enabled;
- const struct smb347_charger_platform_data *pdata;
+
+ unsigned int max_charge_current;
+ unsigned int max_charge_voltage;
+ unsigned int pre_charge_current;
+ unsigned int termination_current;
+ unsigned int pre_to_fast_voltage;
+ unsigned int mains_current_limit;
+ unsigned int usb_hc_current_limit;
+ unsigned int chip_temp_threshold;
+ int soft_cold_temp_limit;
+ int soft_hot_temp_limit;
+ int hard_cold_temp_limit;
+ int hard_hot_temp_limit;
+ bool suspend_on_hard_temp_limit;
+ unsigned int soft_temp_limit_compensation;
+ unsigned int charge_current_compensation;
+ bool use_mains;
+ bool use_usb;
+ bool use_usb_otg;
+ unsigned int enable_control;
};
-/* Fast charge current in uA */
-static const unsigned int fcc_tbl[] = {
- 700000,
- 900000,
- 1200000,
- 1500000,
- 1800000,
- 2000000,
- 2200000,
- 2500000,
+enum smb_charger_chipid {
+ SMB345,
+ SMB347,
+ SMB358,
+ NUM_CHIP_TYPES,
};
+/* Fast charge current in uA */
+static const unsigned int fcc_tbl[NUM_CHIP_TYPES][8] = {
+ [SMB345] = { 200000, 450000, 600000, 900000,
+ 1300000, 1500000, 1800000, 2000000 },
+ [SMB347] = { 700000, 900000, 1200000, 1500000,
+ 1800000, 2000000, 2200000, 2500000 },
+ [SMB358] = { 200000, 450000, 600000, 900000,
+ 1300000, 1500000, 1800000, 2000000 },
+};
/* Pre-charge current in uA */
-static const unsigned int pcc_tbl[] = {
- 100000,
- 150000,
- 200000,
- 250000,
+static const unsigned int pcc_tbl[NUM_CHIP_TYPES][4] = {
+ [SMB345] = { 150000, 250000, 350000, 450000 },
+ [SMB347] = { 100000, 150000, 200000, 250000 },
+ [SMB358] = { 150000, 250000, 350000, 450000 },
};
/* Termination current in uA */
-static const unsigned int tc_tbl[] = {
- 37500,
- 50000,
- 100000,
- 150000,
- 200000,
- 250000,
- 500000,
- 600000,
+static const unsigned int tc_tbl[NUM_CHIP_TYPES][8] = {
+ [SMB345] = { 30000, 40000, 60000, 80000,
+ 100000, 125000, 150000, 200000 },
+ [SMB347] = { 37500, 50000, 100000, 150000,
+ 200000, 250000, 500000, 600000 },
+ [SMB358] = { 30000, 40000, 60000, 80000,
+ 100000, 125000, 150000, 200000 },
};
/* Input current limit in uA */
-static const unsigned int icl_tbl[] = {
- 300000,
- 500000,
- 700000,
- 900000,
- 1200000,
- 1500000,
- 1800000,
- 2000000,
- 2200000,
- 2500000,
+static const unsigned int icl_tbl[NUM_CHIP_TYPES][10] = {
+ [SMB345] = { 300000, 500000, 700000, 1000000, 1500000,
+ 1800000, 2000000, 2000000, 2000000, 2000000 },
+ [SMB347] = { 300000, 500000, 700000, 900000, 1200000,
+ 1500000, 1800000, 2000000, 2200000, 2500000 },
+ [SMB358] = { 300000, 500000, 700000, 1000000, 1500000,
+ 1800000, 2000000, 2000000, 2000000, 2000000 },
};
/* Charge current compensation in uA */
-static const unsigned int ccc_tbl[] = {
- 250000,
- 700000,
- 900000,
- 1200000,
+static const unsigned int ccc_tbl[NUM_CHIP_TYPES][4] = {
+ [SMB345] = { 200000, 450000, 600000, 900000 },
+ [SMB347] = { 250000, 700000, 900000, 1200000 },
+ [SMB358] = { 200000, 450000, 600000, 900000 },
};
/* Convert register value to current using lookup table */
@@ -242,16 +307,14 @@ static int smb347_update_ps_status(struct smb347_charger *smb)
* Dc and usb are set depending on whether they are enabled in
* platform data _and_ whether corresponding undervoltage is set.
*/
- if (smb->pdata->use_mains)
+ if (smb->use_mains)
dc = !(val & IRQSTAT_E_DCIN_UV_STAT);
- if (smb->pdata->use_usb)
+ if (smb->use_usb)
usb = !(val & IRQSTAT_E_USBIN_UV_STAT);
- mutex_lock(&smb->lock);
ret = smb->mains_online != dc || smb->usb_online != usb;
smb->mains_online = dc;
smb->usb_online = usb;
- mutex_unlock(&smb->lock);
return ret;
}
@@ -267,13 +330,7 @@ static int smb347_update_ps_status(struct smb347_charger *smb)
*/
static bool smb347_is_ps_online(struct smb347_charger *smb)
{
- bool ret;
-
- mutex_lock(&smb->lock);
- ret = smb->usb_online || smb->mains_online;
- mutex_unlock(&smb->lock);
-
- return ret;
+ return smb->usb_online || smb->mains_online;
}
/**
@@ -302,19 +359,18 @@ static int smb347_charging_set(struct smb347_charger *smb, bool enable)
{
int ret = 0;
- if (smb->pdata->enable_control != SMB347_CHG_ENABLE_SW) {
+ if (smb->enable_control != SMB3XX_CHG_ENABLE_SW) {
dev_dbg(smb->dev, "charging enable/disable in SW disabled\n");
return 0;
}
- mutex_lock(&smb->lock);
if (smb->charging_enabled != enable) {
ret = regmap_update_bits(smb->regmap, CMD_A, CMD_A_CHG_ENABLED,
enable ? CMD_A_CHG_ENABLED : 0);
if (!ret)
smb->charging_enabled = enable;
}
- mutex_unlock(&smb->lock);
+
return ret;
}
@@ -352,11 +408,12 @@ static int smb347_start_stop_charging(struct smb347_charger *smb)
static int smb347_set_charge_current(struct smb347_charger *smb)
{
+ unsigned int id = smb->id;
int ret;
- if (smb->pdata->max_charge_current) {
- ret = current_to_hw(fcc_tbl, ARRAY_SIZE(fcc_tbl),
- smb->pdata->max_charge_current);
+ if (smb->max_charge_current) {
+ ret = current_to_hw(fcc_tbl[id], ARRAY_SIZE(fcc_tbl[id]),
+ smb->max_charge_current);
if (ret < 0)
return ret;
@@ -367,9 +424,9 @@ static int smb347_set_charge_current(struct smb347_charger *smb)
return ret;
}
- if (smb->pdata->pre_charge_current) {
- ret = current_to_hw(pcc_tbl, ARRAY_SIZE(pcc_tbl),
- smb->pdata->pre_charge_current);
+ if (smb->pre_charge_current) {
+ ret = current_to_hw(pcc_tbl[id], ARRAY_SIZE(pcc_tbl[id]),
+ smb->pre_charge_current);
if (ret < 0)
return ret;
@@ -380,9 +437,9 @@ static int smb347_set_charge_current(struct smb347_charger *smb)
return ret;
}
- if (smb->pdata->termination_current) {
- ret = current_to_hw(tc_tbl, ARRAY_SIZE(tc_tbl),
- smb->pdata->termination_current);
+ if (smb->termination_current) {
+ ret = current_to_hw(tc_tbl[id], ARRAY_SIZE(tc_tbl[id]),
+ smb->termination_current);
if (ret < 0)
return ret;
@@ -397,11 +454,12 @@ static int smb347_set_charge_current(struct smb347_charger *smb)
static int smb347_set_current_limits(struct smb347_charger *smb)
{
+ unsigned int id = smb->id;
int ret;
- if (smb->pdata->mains_current_limit) {
- ret = current_to_hw(icl_tbl, ARRAY_SIZE(icl_tbl),
- smb->pdata->mains_current_limit);
+ if (smb->mains_current_limit) {
+ ret = current_to_hw(icl_tbl[id], ARRAY_SIZE(icl_tbl[id]),
+ smb->mains_current_limit);
if (ret < 0)
return ret;
@@ -412,9 +470,9 @@ static int smb347_set_current_limits(struct smb347_charger *smb)
return ret;
}
- if (smb->pdata->usb_hc_current_limit) {
- ret = current_to_hw(icl_tbl, ARRAY_SIZE(icl_tbl),
- smb->pdata->usb_hc_current_limit);
+ if (smb->usb_hc_current_limit) {
+ ret = current_to_hw(icl_tbl[id], ARRAY_SIZE(icl_tbl[id]),
+ smb->usb_hc_current_limit);
if (ret < 0)
return ret;
@@ -431,8 +489,8 @@ static int smb347_set_voltage_limits(struct smb347_charger *smb)
{
int ret;
- if (smb->pdata->pre_to_fast_voltage) {
- ret = smb->pdata->pre_to_fast_voltage;
+ if (smb->pre_to_fast_voltage) {
+ ret = smb->pre_to_fast_voltage;
/* uV */
ret = clamp_val(ret, 2400000, 3000000) - 2400000;
@@ -445,8 +503,8 @@ static int smb347_set_voltage_limits(struct smb347_charger *smb)
return ret;
}
- if (smb->pdata->max_charge_voltage) {
- ret = smb->pdata->max_charge_voltage;
+ if (smb->max_charge_voltage) {
+ ret = smb->max_charge_voltage;
/* uV */
ret = clamp_val(ret, 3500000, 4500000) - 3500000;
@@ -463,12 +521,13 @@ static int smb347_set_voltage_limits(struct smb347_charger *smb)
static int smb347_set_temp_limits(struct smb347_charger *smb)
{
+ unsigned int id = smb->id;
bool enable_therm_monitor = false;
int ret = 0;
int val;
- if (smb->pdata->chip_temp_threshold) {
- val = smb->pdata->chip_temp_threshold;
+ if (smb->chip_temp_threshold) {
+ val = smb->chip_temp_threshold;
/* degree C */
val = clamp_val(val, 100, 130) - 100;
@@ -481,8 +540,8 @@ static int smb347_set_temp_limits(struct smb347_charger *smb)
return ret;
}
- if (smb->pdata->soft_cold_temp_limit != SMB347_TEMP_USE_DEFAULT) {
- val = smb->pdata->soft_cold_temp_limit;
+ if (smb->soft_cold_temp_limit != SMB3XX_TEMP_USE_DEFAULT) {
+ val = smb->soft_cold_temp_limit;
val = clamp_val(val, 0, 15);
val /= 5;
@@ -498,8 +557,8 @@ static int smb347_set_temp_limits(struct smb347_charger *smb)
enable_therm_monitor = true;
}
- if (smb->pdata->soft_hot_temp_limit != SMB347_TEMP_USE_DEFAULT) {
- val = smb->pdata->soft_hot_temp_limit;
+ if (smb->soft_hot_temp_limit != SMB3XX_TEMP_USE_DEFAULT) {
+ val = smb->soft_hot_temp_limit;
val = clamp_val(val, 40, 55) - 40;
val /= 5;
@@ -513,8 +572,8 @@ static int smb347_set_temp_limits(struct smb347_charger *smb)
enable_therm_monitor = true;
}
- if (smb->pdata->hard_cold_temp_limit != SMB347_TEMP_USE_DEFAULT) {
- val = smb->pdata->hard_cold_temp_limit;
+ if (smb->hard_cold_temp_limit != SMB3XX_TEMP_USE_DEFAULT) {
+ val = smb->hard_cold_temp_limit;
val = clamp_val(val, -5, 10) + 5;
val /= 5;
@@ -530,8 +589,8 @@ static int smb347_set_temp_limits(struct smb347_charger *smb)
enable_therm_monitor = true;
}
- if (smb->pdata->hard_hot_temp_limit != SMB347_TEMP_USE_DEFAULT) {
- val = smb->pdata->hard_hot_temp_limit;
+ if (smb->hard_hot_temp_limit != SMB3XX_TEMP_USE_DEFAULT) {
+ val = smb->hard_hot_temp_limit;
val = clamp_val(val, 50, 65) - 50;
val /= 5;
@@ -562,16 +621,16 @@ static int smb347_set_temp_limits(struct smb347_charger *smb)
return ret;
}
- if (smb->pdata->suspend_on_hard_temp_limit) {
+ if (smb->suspend_on_hard_temp_limit) {
ret = regmap_update_bits(smb->regmap, CFG_SYSOK,
CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED, 0);
if (ret < 0)
return ret;
}
- if (smb->pdata->soft_temp_limit_compensation !=
- SMB347_SOFT_TEMP_COMPENSATE_DEFAULT) {
- val = smb->pdata->soft_temp_limit_compensation & 0x3;
+ if (smb->soft_temp_limit_compensation !=
+ SMB3XX_SOFT_TEMP_COMPENSATE_DEFAULT) {
+ val = smb->soft_temp_limit_compensation & 0x3;
ret = regmap_update_bits(smb->regmap, CFG_THERM,
CFG_THERM_SOFT_HOT_COMPENSATION_MASK,
@@ -586,9 +645,9 @@ static int smb347_set_temp_limits(struct smb347_charger *smb)
return ret;
}
- if (smb->pdata->charge_current_compensation) {
- val = current_to_hw(ccc_tbl, ARRAY_SIZE(ccc_tbl),
- smb->pdata->charge_current_compensation);
+ if (smb->charge_current_compensation) {
+ val = current_to_hw(ccc_tbl[id], ARRAY_SIZE(ccc_tbl[id]),
+ smb->charge_current_compensation);
if (val < 0)
return val;
@@ -647,7 +706,7 @@ static int smb347_hw_init(struct smb347_charger *smb)
goto fail;
/* If USB charging is disabled we put the USB in suspend mode */
- if (!smb->pdata->use_usb) {
+ if (!smb->use_usb) {
ret = regmap_update_bits(smb->regmap, CMD_A,
CMD_A_SUSPEND_ENABLED,
CMD_A_SUSPEND_ENABLED);
@@ -660,7 +719,7 @@ static int smb347_hw_init(struct smb347_charger *smb)
* support for driving VBUS. Otherwise we disable it.
*/
ret = regmap_update_bits(smb->regmap, CFG_OTHER, CFG_OTHER_RID_MASK,
- smb->pdata->use_usb_otg ? CFG_OTHER_RID_ENABLED_AUTO_OTG : 0);
+ smb->use_usb_otg ? CFG_OTHER_RID_ENABLED_AUTO_OTG : 0);
if (ret < 0)
goto fail;
@@ -669,11 +728,11 @@ static int smb347_hw_init(struct smb347_charger *smb)
* command register unless pin control is specified in the platform
* data.
*/
- switch (smb->pdata->enable_control) {
- case SMB347_CHG_ENABLE_PIN_ACTIVE_LOW:
+ switch (smb->enable_control) {
+ case SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW:
val = CFG_PIN_EN_CTRL_ACTIVE_LOW;
break;
- case SMB347_CHG_ENABLE_PIN_ACTIVE_HIGH:
+ case SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH:
val = CFG_PIN_EN_CTRL_ACTIVE_HIGH;
break;
default:
@@ -742,7 +801,10 @@ static irqreturn_t smb347_interrupt(int irq, void *data)
*/
if (stat_c & STAT_C_CHARGER_ERROR) {
dev_err(smb->dev, "charging stopped due to charger error\n");
- power_supply_changed(smb->battery);
+ if (smb->use_mains)
+ power_supply_changed(smb->mains);
+ if (smb->use_usb)
+ power_supply_changed(smb->usb);
handled = true;
}
@@ -752,8 +814,12 @@ static irqreturn_t smb347_interrupt(int irq, void *data)
* disabled by the hardware.
*/
if (irqstat_c & (IRQSTAT_C_TERMINATION_IRQ | IRQSTAT_C_TAPER_IRQ)) {
- if (irqstat_c & IRQSTAT_C_TERMINATION_STAT)
- power_supply_changed(smb->battery);
+ if (irqstat_c & IRQSTAT_C_TERMINATION_STAT) {
+ if (smb->use_mains)
+ power_supply_changed(smb->mains);
+ if (smb->use_usb)
+ power_supply_changed(smb->usb);
+ }
dev_dbg(smb->dev, "going to HW maintenance mode\n");
handled = true;
}
@@ -767,7 +833,10 @@ static irqreturn_t smb347_interrupt(int irq, void *data)
if (irqstat_d & IRQSTAT_D_CHARGE_TIMEOUT_STAT)
dev_warn(smb->dev, "charging stopped due to timeout\n");
- power_supply_changed(smb->battery);
+ if (smb->use_mains)
+ power_supply_changed(smb->mains);
+ if (smb->use_usb)
+ power_supply_changed(smb->usb);
handled = true;
}
@@ -778,9 +847,9 @@ static irqreturn_t smb347_interrupt(int irq, void *data)
if (irqstat_e & (IRQSTAT_E_USBIN_UV_IRQ | IRQSTAT_E_DCIN_UV_IRQ)) {
if (smb347_update_ps_status(smb) > 0) {
smb347_start_stop_charging(smb);
- if (smb->pdata->use_mains)
+ if (smb->use_mains)
power_supply_changed(smb->mains);
- if (smb->pdata->use_usb)
+ if (smb->use_usb)
power_supply_changed(smb->usb);
}
handled = true;
@@ -835,22 +904,17 @@ static inline int smb347_irq_disable(struct smb347_charger *smb)
static int smb347_irq_init(struct smb347_charger *smb,
struct i2c_client *client)
{
- const struct smb347_charger_platform_data *pdata = smb->pdata;
- int ret, irq = gpio_to_irq(pdata->irq_gpio);
-
- ret = gpio_request_one(pdata->irq_gpio, GPIOF_IN, client->name);
- if (ret < 0)
- goto fail;
+ int ret;
- ret = request_threaded_irq(irq, NULL, smb347_interrupt,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- client->name, smb);
+ ret = devm_request_threaded_irq(smb->dev, client->irq, NULL,
+ smb347_interrupt, IRQF_ONESHOT,
+ client->name, smb);
if (ret < 0)
- goto fail_gpio;
+ return ret;
ret = smb347_set_writable(smb, true);
if (ret < 0)
- goto fail_irq;
+ return ret;
/*
* Configure the STAT output to be suitable for interrupts: disable
@@ -860,20 +924,10 @@ static int smb347_irq_init(struct smb347_charger *smb,
CFG_STAT_ACTIVE_HIGH | CFG_STAT_DISABLED,
CFG_STAT_DISABLED);
if (ret < 0)
- goto fail_readonly;
+ client->irq = 0;
smb347_set_writable(smb, false);
- client->irq = irq;
- return 0;
-fail_readonly:
- smb347_set_writable(smb, false);
-fail_irq:
- free_irq(irq, smb);
-fail_gpio:
- gpio_free(pdata->irq_gpio);
-fail:
- client->irq = 0;
return ret;
}
@@ -883,6 +937,7 @@ fail:
*/
static int get_const_charge_current(struct smb347_charger *smb)
{
+ unsigned int id = smb->id;
int ret, intval;
unsigned int v;
@@ -898,10 +953,12 @@ static int get_const_charge_current(struct smb347_charger *smb)
* and we can detect which table to use from bit 5.
*/
if (v & 0x20) {
- intval = hw_to_current(fcc_tbl, ARRAY_SIZE(fcc_tbl), v & 7);
+ intval = hw_to_current(fcc_tbl[id],
+ ARRAY_SIZE(fcc_tbl[id]), v & 7);
} else {
v >>= 3;
- intval = hw_to_current(pcc_tbl, ARRAY_SIZE(pcc_tbl), v & 7);
+ intval = hw_to_current(pcc_tbl[id],
+ ARRAY_SIZE(pcc_tbl[id]), v & 7);
}
return intval;
@@ -932,95 +989,19 @@ static int get_const_charge_voltage(struct smb347_charger *smb)
return intval;
}
-static int smb347_mains_get_property(struct power_supply *psy,
- enum power_supply_property prop,
- union power_supply_propval *val)
-{
- struct smb347_charger *smb = power_supply_get_drvdata(psy);
- int ret;
-
- switch (prop) {
- case POWER_SUPPLY_PROP_ONLINE:
- val->intval = smb->mains_online;
- break;
-
- case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
- ret = get_const_charge_voltage(smb);
- if (ret < 0)
- return ret;
- else
- val->intval = ret;
- break;
-
- case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
- ret = get_const_charge_current(smb);
- if (ret < 0)
- return ret;
- else
- val->intval = ret;
- break;
-
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static enum power_supply_property smb347_mains_properties[] = {
- POWER_SUPPLY_PROP_ONLINE,
- POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
- POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
-};
-
-static int smb347_usb_get_property(struct power_supply *psy,
- enum power_supply_property prop,
- union power_supply_propval *val)
-{
- struct smb347_charger *smb = power_supply_get_drvdata(psy);
- int ret;
-
- switch (prop) {
- case POWER_SUPPLY_PROP_ONLINE:
- val->intval = smb->usb_online;
- break;
-
- case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
- ret = get_const_charge_voltage(smb);
- if (ret < 0)
- return ret;
- else
- val->intval = ret;
- break;
-
- case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
- ret = get_const_charge_current(smb);
- if (ret < 0)
- return ret;
- else
- val->intval = ret;
- break;
-
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static enum power_supply_property smb347_usb_properties[] = {
- POWER_SUPPLY_PROP_ONLINE,
- POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
- POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
-};
-
-static int smb347_get_charging_status(struct smb347_charger *smb)
+static int smb347_get_charging_status(struct smb347_charger *smb,
+ struct power_supply *psy)
{
int ret, status;
unsigned int val;
- if (!smb347_is_ps_online(smb))
- return POWER_SUPPLY_STATUS_DISCHARGING;
+ if (psy->desc->type == POWER_SUPPLY_TYPE_USB) {
+ if (!smb->usb_online)
+ return POWER_SUPPLY_STATUS_DISCHARGING;
+ } else {
+ if (!smb->mains_online)
+ return POWER_SUPPLY_STATUS_DISCHARGING;
+ }
ret = regmap_read(smb->regmap, STAT_C, &val);
if (ret < 0)
@@ -1059,29 +1040,29 @@ static int smb347_get_charging_status(struct smb347_charger *smb)
return status;
}
-static int smb347_battery_get_property(struct power_supply *psy,
- enum power_supply_property prop,
- union power_supply_propval *val)
+static int smb347_get_property_locked(struct power_supply *psy,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
{
struct smb347_charger *smb = power_supply_get_drvdata(psy);
- const struct smb347_charger_platform_data *pdata = smb->pdata;
int ret;
- ret = smb347_update_ps_status(smb);
- if (ret < 0)
- return ret;
-
switch (prop) {
case POWER_SUPPLY_PROP_STATUS:
- ret = smb347_get_charging_status(smb);
+ ret = smb347_get_charging_status(smb, psy);
if (ret < 0)
return ret;
val->intval = ret;
break;
case POWER_SUPPLY_PROP_CHARGE_TYPE:
- if (!smb347_is_ps_online(smb))
- return -ENODATA;
+ if (psy->desc->type == POWER_SUPPLY_TYPE_USB) {
+ if (!smb->usb_online)
+ return -ENODATA;
+ } else {
+ if (!smb->mains_online)
+ return -ENODATA;
+ }
/*
* We handle trickle and pre-charging the same, and taper
@@ -1100,24 +1081,25 @@ static int smb347_battery_get_property(struct power_supply *psy,
}
break;
- case POWER_SUPPLY_PROP_TECHNOLOGY:
- val->intval = pdata->battery_info.technology;
- break;
-
- case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
- val->intval = pdata->battery_info.voltage_min_design;
- break;
-
- case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
- val->intval = pdata->battery_info.voltage_max_design;
+ case POWER_SUPPLY_PROP_ONLINE:
+ if (psy->desc->type == POWER_SUPPLY_TYPE_USB)
+ val->intval = smb->usb_online;
+ else
+ val->intval = smb->mains_online;
break;
- case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
- val->intval = pdata->battery_info.charge_full_design;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = get_const_charge_voltage(smb);
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
break;
- case POWER_SUPPLY_PROP_MODEL_NAME:
- val->strval = pdata->battery_info.name;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = get_const_charge_current(smb);
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
break;
default:
@@ -1127,14 +1109,27 @@ static int smb347_battery_get_property(struct power_supply *psy,
return 0;
}
-static enum power_supply_property smb347_battery_properties[] = {
+static int smb347_get_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct smb347_charger *smb = power_supply_get_drvdata(psy);
+ struct i2c_client *client = to_i2c_client(smb->dev);
+ int ret;
+
+ disable_irq(client->irq);
+ ret = smb347_get_property_locked(psy, prop, val);
+ enable_irq(client->irq);
+
+ return ret;
+}
+
+static enum power_supply_property smb347_properties[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_CHARGE_TYPE,
- POWER_SUPPLY_PROP_TECHNOLOGY,
- POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
- POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
- POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
- POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
};
static bool smb347_volatile_reg(struct device *dev, unsigned int reg)
@@ -1180,6 +1175,96 @@ static bool smb347_readable_reg(struct device *dev, unsigned int reg)
return smb347_volatile_reg(dev, reg);
}
+static void smb347_dt_parse_dev_info(struct smb347_charger *smb)
+{
+ struct device *dev = smb->dev;
+
+ smb->soft_temp_limit_compensation =
+ SMB3XX_SOFT_TEMP_COMPENSATE_DEFAULT;
+ /*
+ * These properties come from the battery info, still we need to
+ * pre-initialize the values. See smb347_get_battery_info() below.
+ */
+ smb->soft_cold_temp_limit = SMB3XX_TEMP_USE_DEFAULT;
+ smb->hard_cold_temp_limit = SMB3XX_TEMP_USE_DEFAULT;
+ smb->soft_hot_temp_limit = SMB3XX_TEMP_USE_DEFAULT;
+ smb->hard_hot_temp_limit = SMB3XX_TEMP_USE_DEFAULT;
+
+ /* Charging constraints */
+ device_property_read_u32(dev, "summit,fast-voltage-threshold-microvolt",
+ &smb->pre_to_fast_voltage);
+ device_property_read_u32(dev, "summit,mains-current-limit-microamp",
+ &smb->mains_current_limit);
+ device_property_read_u32(dev, "summit,usb-current-limit-microamp",
+ &smb->usb_hc_current_limit);
+
+ /* For thermometer monitoring */
+ device_property_read_u32(dev, "summit,chip-temperature-threshold-celsius",
+ &smb->chip_temp_threshold);
+ device_property_read_u32(dev, "summit,soft-compensation-method",
+ &smb->soft_temp_limit_compensation);
+ device_property_read_u32(dev, "summit,charge-current-compensation-microamp",
+ &smb->charge_current_compensation);
+
+ /* Supported charging mode */
+ smb->use_mains = device_property_read_bool(dev, "summit,enable-mains-charging");
+ smb->use_usb = device_property_read_bool(dev, "summit,enable-usb-charging");
+ smb->use_usb_otg = device_property_read_bool(dev, "summit,enable-otg-charging");
+
+ /* Select charging control */
+ device_property_read_u32(dev, "summit,enable-charge-control",
+ &smb->enable_control);
+}
+
+static int smb347_get_battery_info(struct smb347_charger *smb)
+{
+ struct power_supply_battery_info info = {};
+ struct power_supply *supply;
+ int err;
+
+ if (smb->mains)
+ supply = smb->mains;
+ else
+ supply = smb->usb;
+
+ err = power_supply_get_battery_info(supply, &info);
+ if (err == -ENXIO || err == -ENODEV)
+ return 0;
+ if (err)
+ return err;
+
+ if (info.constant_charge_current_max_ua != -EINVAL)
+ smb->max_charge_current = info.constant_charge_current_max_ua;
+
+ if (info.constant_charge_voltage_max_uv != -EINVAL)
+ smb->max_charge_voltage = info.constant_charge_voltage_max_uv;
+
+ if (info.precharge_current_ua != -EINVAL)
+ smb->pre_charge_current = info.precharge_current_ua;
+
+ if (info.charge_term_current_ua != -EINVAL)
+ smb->termination_current = info.charge_term_current_ua;
+
+ if (info.temp_alert_min != INT_MIN)
+ smb->soft_cold_temp_limit = info.temp_alert_min;
+
+ if (info.temp_alert_max != INT_MAX)
+ smb->soft_hot_temp_limit = info.temp_alert_max;
+
+ if (info.temp_min != INT_MIN)
+ smb->hard_cold_temp_limit = info.temp_min;
+
+ if (info.temp_max != INT_MAX)
+ smb->hard_hot_temp_limit = info.temp_max;
+
+ /* Suspend when battery temperature is outside hard limits */
+ if (smb->hard_cold_temp_limit != SMB3XX_TEMP_USE_DEFAULT ||
+ smb->hard_hot_temp_limit != SMB3XX_TEMP_USE_DEFAULT)
+ smb->suspend_on_hard_temp_limit = true;
+
+ return 0;
+}
+
static const struct regmap_config smb347_regmap = {
.reg_bits = 8,
.val_bits = 8,
@@ -1191,98 +1276,71 @@ static const struct regmap_config smb347_regmap = {
static const struct power_supply_desc smb347_mains_desc = {
.name = "smb347-mains",
.type = POWER_SUPPLY_TYPE_MAINS,
- .get_property = smb347_mains_get_property,
- .properties = smb347_mains_properties,
- .num_properties = ARRAY_SIZE(smb347_mains_properties),
+ .get_property = smb347_get_property,
+ .properties = smb347_properties,
+ .num_properties = ARRAY_SIZE(smb347_properties),
};
static const struct power_supply_desc smb347_usb_desc = {
.name = "smb347-usb",
.type = POWER_SUPPLY_TYPE_USB,
- .get_property = smb347_usb_get_property,
- .properties = smb347_usb_properties,
- .num_properties = ARRAY_SIZE(smb347_usb_properties),
-};
-
-static const struct power_supply_desc smb347_battery_desc = {
- .name = "smb347-battery",
- .type = POWER_SUPPLY_TYPE_BATTERY,
- .get_property = smb347_battery_get_property,
- .properties = smb347_battery_properties,
- .num_properties = ARRAY_SIZE(smb347_battery_properties),
+ .get_property = smb347_get_property,
+ .properties = smb347_properties,
+ .num_properties = ARRAY_SIZE(smb347_properties),
};
static int smb347_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- static char *battery[] = { "smb347-battery" };
- const struct smb347_charger_platform_data *pdata;
- struct power_supply_config mains_usb_cfg = {}, battery_cfg = {};
+ struct power_supply_config mains_usb_cfg = {};
struct device *dev = &client->dev;
struct smb347_charger *smb;
int ret;
- pdata = dev->platform_data;
- if (!pdata)
- return -EINVAL;
-
- if (!pdata->use_mains && !pdata->use_usb)
- return -EINVAL;
-
smb = devm_kzalloc(dev, sizeof(*smb), GFP_KERNEL);
if (!smb)
return -ENOMEM;
-
+ smb->dev = &client->dev;
+ smb->id = id->driver_data;
i2c_set_clientdata(client, smb);
- mutex_init(&smb->lock);
- smb->dev = &client->dev;
- smb->pdata = pdata;
+ smb347_dt_parse_dev_info(smb);
+ if (!smb->use_mains && !smb->use_usb)
+ return -EINVAL;
smb->regmap = devm_regmap_init_i2c(client, &smb347_regmap);
if (IS_ERR(smb->regmap))
return PTR_ERR(smb->regmap);
- ret = smb347_hw_init(smb);
- if (ret < 0)
- return ret;
-
- mains_usb_cfg.supplied_to = battery;
- mains_usb_cfg.num_supplicants = ARRAY_SIZE(battery);
mains_usb_cfg.drv_data = smb;
- if (smb->pdata->use_mains) {
- smb->mains = power_supply_register(dev, &smb347_mains_desc,
- &mains_usb_cfg);
+ mains_usb_cfg.of_node = dev->of_node;
+ if (smb->use_mains) {
+ smb->mains = devm_power_supply_register(dev, &smb347_mains_desc,
+ &mains_usb_cfg);
if (IS_ERR(smb->mains))
return PTR_ERR(smb->mains);
}
- if (smb->pdata->use_usb) {
- smb->usb = power_supply_register(dev, &smb347_usb_desc,
- &mains_usb_cfg);
- if (IS_ERR(smb->usb)) {
- if (smb->pdata->use_mains)
- power_supply_unregister(smb->mains);
+ if (smb->use_usb) {
+ smb->usb = devm_power_supply_register(dev, &smb347_usb_desc,
+ &mains_usb_cfg);
+ if (IS_ERR(smb->usb))
return PTR_ERR(smb->usb);
- }
}
- battery_cfg.drv_data = smb;
- smb->battery = power_supply_register(dev, &smb347_battery_desc,
- &battery_cfg);
- if (IS_ERR(smb->battery)) {
- if (smb->pdata->use_usb)
- power_supply_unregister(smb->usb);
- if (smb->pdata->use_mains)
- power_supply_unregister(smb->mains);
- return PTR_ERR(smb->battery);
- }
+ ret = smb347_get_battery_info(smb);
+ if (ret)
+ return ret;
+
+ ret = smb347_hw_init(smb);
+ if (ret < 0)
+ return ret;
/*
* Interrupt pin is optional. If it is connected, we setup the
* interrupt support here.
*/
- if (pdata->irq_gpio >= 0) {
+ if (client->irq) {
ret = smb347_irq_init(smb, client);
if (ret < 0) {
dev_warn(dev, "failed to initialize IRQ: %d\n", ret);
@@ -1299,29 +1357,31 @@ static int smb347_remove(struct i2c_client *client)
{
struct smb347_charger *smb = i2c_get_clientdata(client);
- if (client->irq) {
+ if (client->irq)
smb347_irq_disable(smb);
- free_irq(client->irq, smb);
- gpio_free(smb->pdata->irq_gpio);
- }
-
- power_supply_unregister(smb->battery);
- if (smb->pdata->use_usb)
- power_supply_unregister(smb->usb);
- if (smb->pdata->use_mains)
- power_supply_unregister(smb->mains);
return 0;
}
static const struct i2c_device_id smb347_id[] = {
- { "smb347", 0 },
- { }
+ { "smb345", SMB345 },
+ { "smb347", SMB347 },
+ { "smb358", SMB358 },
+ { },
};
MODULE_DEVICE_TABLE(i2c, smb347_id);
+static const struct of_device_id smb3xx_of_match[] = {
+ { .compatible = "summit,smb345" },
+ { .compatible = "summit,smb347" },
+ { .compatible = "summit,smb358" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, smb3xx_of_match);
+
static struct i2c_driver smb347_driver = {
.driver = {
.name = "smb347",
+ .of_match_table = smb3xx_of_match,
},
.probe = smb347_probe,
.remove = smb347_remove,