diff options
Diffstat (limited to 'drivers/pwm/pwm-imx27.c')
-rw-r--r-- | drivers/pwm/pwm-imx27.c | 120 |
1 files changed, 59 insertions, 61 deletions
diff --git a/drivers/pwm/pwm-imx27.c b/drivers/pwm/pwm-imx27.c index 4113d5cd4c62..59d8b1289808 100644 --- a/drivers/pwm/pwm-imx27.c +++ b/drivers/pwm/pwm-imx27.c @@ -230,70 +230,68 @@ static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm, pwm_get_state(pwm, &cstate); - if (state->enabled) { - c = clk_get_rate(imx->clk_per); - c *= state->period; - - do_div(c, 1000000000); - period_cycles = c; - - prescale = period_cycles / 0x10000 + 1; - - period_cycles /= prescale; - c = (unsigned long long)period_cycles * state->duty_cycle; - do_div(c, state->period); - duty_cycles = c; - - /* - * according to imx pwm RM, the real period value should be - * PERIOD value in PWMPR plus 2. - */ - if (period_cycles > 2) - period_cycles -= 2; - else - period_cycles = 0; - - /* - * Wait for a free FIFO slot if the PWM is already enabled, and - * flush the FIFO if the PWM was disabled and is about to be - * enabled. - */ - if (cstate.enabled) { - pwm_imx27_wait_fifo_slot(chip, pwm); - } else { - ret = pwm_imx27_clk_prepare_enable(chip); - if (ret) - return ret; - - pwm_imx27_sw_reset(chip); - } - - writel(duty_cycles, imx->mmio_base + MX3_PWMSAR); - writel(period_cycles, imx->mmio_base + MX3_PWMPR); - - /* - * Store the duty cycle for future reference in cases where - * the MX3_PWMSAR register can't be read (i.e. when the PWM - * is disabled). - */ - imx->duty_cycle = duty_cycles; - - cr = MX3_PWMCR_PRESCALER_SET(prescale) | - MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEN | MX3_PWMCR_WAITEN | - FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) | - MX3_PWMCR_DBGEN | MX3_PWMCR_EN; - - if (state->polarity == PWM_POLARITY_INVERSED) - cr |= FIELD_PREP(MX3_PWMCR_POUTC, - MX3_PWMCR_POUTC_INVERTED); - - writel(cr, imx->mmio_base + MX3_PWMCR); - } else if (cstate.enabled) { - writel(0, imx->mmio_base + MX3_PWMCR); + c = clk_get_rate(imx->clk_per); + c *= state->period; - pwm_imx27_clk_disable_unprepare(chip); + do_div(c, 1000000000); + period_cycles = c; + + prescale = period_cycles / 0x10000 + 1; + + period_cycles /= prescale; + c = (unsigned long long)period_cycles * state->duty_cycle; + do_div(c, state->period); + duty_cycles = c; + + /* + * according to imx pwm RM, the real period value should be PERIOD + * value in PWMPR plus 2. + */ + if (period_cycles > 2) + period_cycles -= 2; + else + period_cycles = 0; + + /* + * Wait for a free FIFO slot if the PWM is already enabled, and flush + * the FIFO if the PWM was disabled and is about to be enabled. + */ + if (cstate.enabled) { + pwm_imx27_wait_fifo_slot(chip, pwm); + } else { + ret = pwm_imx27_clk_prepare_enable(chip); + if (ret) + return ret; + + pwm_imx27_sw_reset(chip); } + writel(duty_cycles, imx->mmio_base + MX3_PWMSAR); + writel(period_cycles, imx->mmio_base + MX3_PWMPR); + + /* + * Store the duty cycle for future reference in cases where the + * MX3_PWMSAR register can't be read (i.e. when the PWM is disabled). + */ + imx->duty_cycle = duty_cycles; + + cr = MX3_PWMCR_PRESCALER_SET(prescale) | + MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEN | MX3_PWMCR_WAITEN | + FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) | + MX3_PWMCR_DBGEN; + + if (state->polarity == PWM_POLARITY_INVERSED) + cr |= FIELD_PREP(MX3_PWMCR_POUTC, + MX3_PWMCR_POUTC_INVERTED); + + if (state->enabled) + cr |= MX3_PWMCR_EN; + + writel(cr, imx->mmio_base + MX3_PWMCR); + + if (!state->enabled && cstate.enabled) + pwm_imx27_clk_disable_unprepare(chip); + return 0; } |