diff options
Diffstat (limited to 'drivers/regulator/Kconfig')
| -rw-r--r-- | drivers/regulator/Kconfig | 54 |
1 files changed, 47 insertions, 7 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 6a7932822e37..903eb37f047a 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -139,6 +139,14 @@ config REGULATOR_AS3722 AS3722 PMIC. This will enable support for all the software controllable DCDC/LDO regulators. +config REGULATOR_BCM590XX + tristate "Broadcom BCM590xx PMU Regulators" + depends on MFD_BCM590XX + help + This driver provides support for the voltage regulators on the + BCM590xx PMUs. This will enable support for the software + controllable LDO/Switching regulators. + config REGULATOR_DA903X tristate "Dialog Semiconductor DA9030/DA9034 regulators" depends on PMIC_DA903X @@ -384,6 +392,15 @@ config REGULATOR_PALMAS on the muxing. This is handled automatically in the driver by reading the mux info from OTP. +config REGULATOR_PBIAS + tristate "PBIAS OMAP regulator driver" + depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON + help + Say y here to support pbias regulator for mmc1:SD card i/o + on OMAP SoCs. + This driver provides support for OMAP pbias modelled + regulators. + config REGULATOR_PCAP tristate "Motorola PCAP2 regulator driver" depends on EZX_PCAP @@ -399,12 +416,12 @@ config REGULATOR_PCF50633 on PCF50633 config REGULATOR_PFUZE100 - tristate "Freescale PFUZE100 regulator driver" + tristate "Freescale PFUZE100/PFUZE200 regulator driver" depends on I2C select REGMAP_I2C help - Say y here to support the regulators found on the Freescale PFUZE100 - PMIC. + Say y here to support the regulators found on the Freescale + PFUZE100/PFUZE200 PMIC. config REGULATOR_RC5T583 tristate "RICOH RC5T583 Power regulators" @@ -416,13 +433,21 @@ config REGULATOR_RC5T583 through regulator interface. The device supports multiple DCDC/LDO outputs which can be controlled by i2c communication. +config REGULATOR_S2MPA01 + tristate "Samsung S2MPA01 voltage regulator" + depends on MFD_SEC_CORE + help + This driver controls Samsung S2MPA01 voltage output regulator + via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. + config REGULATOR_S2MPS11 - tristate "Samsung S2MPS11 voltage regulator" + tristate "Samsung S2MPS11/S2MPS14 voltage regulator" depends on MFD_SEC_CORE help - This driver supports a Samsung S2MPS11 voltage output regulator - via I2C bus. S2MPS11 is comprised of high efficient Buck converters - including Dual-Phase Buck converter, Buck-Boost converter, various LDOs. + This driver supports a Samsung S2MPS11/S2MPS14 voltage output + regulator via I2C bus. The chip is comprised of high efficient Buck + converters including Dual-Phase Buck converter, Buck-Boost converter, + various LDOs. config REGULATOR_S5M8767 tristate "Samsung S5M8767A voltage regulator" @@ -432,6 +457,12 @@ config REGULATOR_S5M8767 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and supports DVS mode with 8bits of output voltage control. +config REGULATOR_ST_PWM + tristate "STMicroelectronics PWM voltage regulator" + depends on ARCH_STI + help + This driver supports ST's PWM controlled voltage regulators. + config REGULATOR_TI_ABB tristate "TI Adaptive Body Bias on-chip LDO" depends on ARCH_OMAP @@ -513,6 +544,15 @@ config REGULATOR_TPS65217 voltage regulators. It supports software based voltage control for different voltage domains +config REGULATOR_TPS65218 + tristate "TI TPS65218 Power regulators" + depends on MFD_TPS65218 && OF + help + This driver supports TPS65218 voltage regulator chips. TPS65218 + provides six step-down converters and one general-purpose LDO + voltage regulators. It supports software based voltage control + for different voltage domains + config REGULATOR_TPS6524X tristate "TI TPS6524X Power regulators" depends on SPI |