diff options
Diffstat (limited to 'drivers/remoteproc/ti_k3_r5_remoteproc.c')
| -rw-r--r-- | drivers/remoteproc/ti_k3_r5_remoteproc.c | 52 |
1 files changed, 50 insertions, 2 deletions
diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c b/drivers/remoteproc/ti_k3_r5_remoteproc.c index 40fa7a4d2ec8..66a32dcdd7d0 100644 --- a/drivers/remoteproc/ti_k3_r5_remoteproc.c +++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c @@ -38,6 +38,8 @@ #define PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE 0x00000800 #define PROC_BOOT_CFG_FLAG_R5_BTCM_EN 0x00001000 #define PROC_BOOT_CFG_FLAG_R5_ATCM_EN 0x00002000 +/* Available from J7200 SoCs onwards */ +#define PROC_BOOT_CFG_FLAG_R5_MEM_INIT_DIS 0x00004000 /* R5 TI-SCI Processor Control Flags */ #define PROC_BOOT_CTRL_FLAG_R5_CORE_HALT 0x00000001 @@ -68,15 +70,25 @@ enum cluster_mode { }; /** + * struct k3_r5_soc_data - match data to handle SoC variations + * @tcm_ecc_autoinit: flag to denote the auto-initialization of TCMs for ECC + */ +struct k3_r5_soc_data { + bool tcm_ecc_autoinit; +}; + +/** * struct k3_r5_cluster - K3 R5F Cluster structure * @dev: cached device pointer * @mode: Mode to configure the Cluster - Split or LockStep * @cores: list of R5 cores within the cluster + * @soc_data: SoC-specific feature data for a R5FSS */ struct k3_r5_cluster { struct device *dev; enum cluster_mode mode; struct list_head cores; + const struct k3_r5_soc_data *soc_data; }; /** @@ -362,8 +374,16 @@ static int k3_r5_rproc_prepare(struct rproc *rproc) struct k3_r5_cluster *cluster = kproc->cluster; struct k3_r5_core *core = kproc->core; struct device *dev = kproc->dev; + u32 ctrl = 0, cfg = 0, stat = 0; + u64 boot_vec = 0; + bool mem_init_dis; int ret; + ret = ti_sci_proc_get_status(core->tsp, &boot_vec, &cfg, &ctrl, &stat); + if (ret < 0) + return ret; + mem_init_dis = !!(cfg & PROC_BOOT_CFG_FLAG_R5_MEM_INIT_DIS); + ret = (cluster->mode == CLUSTER_MODE_LOCKSTEP) ? k3_r5_lockstep_release(cluster) : k3_r5_split_release(core); if (ret) { @@ -373,6 +393,17 @@ static int k3_r5_rproc_prepare(struct rproc *rproc) } /* + * Newer IP revisions like on J7200 SoCs support h/w auto-initialization + * of TCMs, so there is no need to perform the s/w memzero. This bit is + * configurable through System Firmware, the default value does perform + * auto-init, but account for it in case it is disabled + */ + if (cluster->soc_data->tcm_ecc_autoinit && !mem_init_dis) { + dev_dbg(dev, "leveraging h/w init for TCM memories\n"); + return 0; + } + + /* * Zero out both TCMs unconditionally (access from v8 Arm core is not * affected by ATCM & BTCM enable configuration values) so that ECC * can be effective on all TCM addresses. @@ -1309,15 +1340,23 @@ static int k3_r5_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct device_node *np = dev_of_node(dev); struct k3_r5_cluster *cluster; + const struct k3_r5_soc_data *data; int ret; int num_cores; + data = of_device_get_match_data(&pdev->dev); + if (!data) { + dev_err(dev, "SoC-specific data is not defined\n"); + return -ENODEV; + } + cluster = devm_kzalloc(dev, sizeof(*cluster), GFP_KERNEL); if (!cluster) return -ENOMEM; cluster->dev = dev; cluster->mode = CLUSTER_MODE_LOCKSTEP; + cluster->soc_data = data; INIT_LIST_HEAD(&cluster->cores); ret = of_property_read_u32(np, "ti,cluster-mode", &cluster->mode); @@ -1367,9 +1406,18 @@ static int k3_r5_probe(struct platform_device *pdev) return 0; } +static const struct k3_r5_soc_data am65_j721e_soc_data = { + .tcm_ecc_autoinit = false, +}; + +static const struct k3_r5_soc_data j7200_soc_data = { + .tcm_ecc_autoinit = true, +}; + static const struct of_device_id k3_r5_of_match[] = { - { .compatible = "ti,am654-r5fss", }, - { .compatible = "ti,j721e-r5fss", }, + { .compatible = "ti,am654-r5fss", .data = &am65_j721e_soc_data, }, + { .compatible = "ti,j721e-r5fss", .data = &am65_j721e_soc_data, }, + { .compatible = "ti,j7200-r5fss", .data = &j7200_soc_data, }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, k3_r5_of_match); |