aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/remoteproc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/remoteproc')
-rw-r--r--drivers/remoteproc/Kconfig12
-rw-r--r--drivers/remoteproc/Makefile1
-rw-r--r--drivers/remoteproc/pru_rproc.c433
3 files changed, 446 insertions, 0 deletions
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index d45be05640ea..9e7efe542f69 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -125,6 +125,18 @@ config KEYSTONE_REMOTEPROC
It's safe to say N here if you're not interested in the Keystone
DSPs or just want to use a bare minimum kernel.
+config PRU_REMOTEPROC
+ tristate "TI PRU remoteproc support"
+ depends on TI_PRUSS
+ default TI_PRUSS
+ help
+ Support for TI PRU remote processors present within a PRU-ICSS
+ subsystem via the remote processor framework.
+
+ Say Y or M here to support the Programmable Realtime Unit (PRU)
+ processors on various TI SoCs. It's safe to say N here if you're
+ not interested in the PRU or if you are unsure.
+
config QCOM_PIL_INFO
tristate
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index da2ace4ec86c..bb26c9e4ef9c 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o
obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o
obj-$(CONFIG_KEYSTONE_REMOTEPROC) += keystone_remoteproc.o
+obj-$(CONFIG_PRU_REMOTEPROC) += pru_rproc.o
obj-$(CONFIG_QCOM_PIL_INFO) += qcom_pil_info.o
obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o
obj-$(CONFIG_QCOM_Q6V5_COMMON) += qcom_q6v5.o
diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
new file mode 100644
index 000000000000..d33392bbd8af
--- /dev/null
+++ b/drivers/remoteproc/pru_rproc.c
@@ -0,0 +1,433 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PRU-ICSS remoteproc driver for various TI SoCs
+ *
+ * Copyright (C) 2014-2020 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Author(s):
+ * Suman Anna <s-anna@ti.com>
+ * Andrew F. Davis <afd@ti.com>
+ * Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> for Texas Instruments
+ */
+
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pruss_driver.h>
+#include <linux/remoteproc.h>
+
+#include "remoteproc_internal.h"
+#include "remoteproc_elf_helpers.h"
+
+/* PRU_ICSS_PRU_CTRL registers */
+#define PRU_CTRL_CTRL 0x0000
+#define PRU_CTRL_STS 0x0004
+
+/* CTRL register bit-fields */
+#define CTRL_CTRL_SOFT_RST_N BIT(0)
+#define CTRL_CTRL_EN BIT(1)
+#define CTRL_CTRL_SLEEPING BIT(2)
+#define CTRL_CTRL_CTR_EN BIT(3)
+#define CTRL_CTRL_SINGLE_STEP BIT(8)
+#define CTRL_CTRL_RUNSTATE BIT(15)
+
+/* PRU Core IRAM address masks */
+#define PRU_IRAM_ADDR_MASK 0x3ffff
+#define PRU0_IRAM_ADDR_MASK 0x34000
+#define PRU1_IRAM_ADDR_MASK 0x38000
+
+/* PRU device addresses for various type of PRU RAMs */
+#define PRU_IRAM_DA 0 /* Instruction RAM */
+#define PRU_PDRAM_DA 0 /* Primary Data RAM */
+#define PRU_SDRAM_DA 0x2000 /* Secondary Data RAM */
+#define PRU_SHRDRAM_DA 0x10000 /* Shared Data RAM */
+
+/**
+ * enum pru_iomem - PRU core memory/register range identifiers
+ *
+ * @PRU_IOMEM_IRAM: PRU Instruction RAM range
+ * @PRU_IOMEM_CTRL: PRU Control register range
+ * @PRU_IOMEM_DEBUG: PRU Debug register range
+ * @PRU_IOMEM_MAX: just keep this one at the end
+ */
+enum pru_iomem {
+ PRU_IOMEM_IRAM = 0,
+ PRU_IOMEM_CTRL,
+ PRU_IOMEM_DEBUG,
+ PRU_IOMEM_MAX,
+};
+
+/**
+ * struct pru_rproc - PRU remoteproc structure
+ * @id: id of the PRU core within the PRUSS
+ * @dev: PRU core device pointer
+ * @pruss: back-reference to parent PRUSS structure
+ * @rproc: remoteproc pointer for this PRU core
+ * @mem_regions: data for each of the PRU memory regions
+ * @fw_name: name of firmware image used during loading
+ */
+struct pru_rproc {
+ int id;
+ struct device *dev;
+ struct pruss *pruss;
+ struct rproc *rproc;
+ struct pruss_mem_region mem_regions[PRU_IOMEM_MAX];
+ const char *fw_name;
+};
+
+static inline u32 pru_control_read_reg(struct pru_rproc *pru, unsigned int reg)
+{
+ return readl_relaxed(pru->mem_regions[PRU_IOMEM_CTRL].va + reg);
+}
+
+static inline
+void pru_control_write_reg(struct pru_rproc *pru, unsigned int reg, u32 val)
+{
+ writel_relaxed(val, pru->mem_regions[PRU_IOMEM_CTRL].va + reg);
+}
+
+static int pru_rproc_start(struct rproc *rproc)
+{
+ struct device *dev = &rproc->dev;
+ struct pru_rproc *pru = rproc->priv;
+ u32 val;
+
+ dev_dbg(dev, "starting PRU%d: entry-point = 0x%llx\n",
+ pru->id, (rproc->bootaddr >> 2));
+
+ val = CTRL_CTRL_EN | ((rproc->bootaddr >> 2) << 16);
+ pru_control_write_reg(pru, PRU_CTRL_CTRL, val);
+
+ return 0;
+}
+
+static int pru_rproc_stop(struct rproc *rproc)
+{
+ struct device *dev = &rproc->dev;
+ struct pru_rproc *pru = rproc->priv;
+ u32 val;
+
+ dev_dbg(dev, "stopping PRU%d\n", pru->id);
+
+ val = pru_control_read_reg(pru, PRU_CTRL_CTRL);
+ val &= ~CTRL_CTRL_EN;
+ pru_control_write_reg(pru, PRU_CTRL_CTRL, val);
+
+ return 0;
+}
+
+/*
+ * Convert PRU device address (data spaces only) to kernel virtual address.
+ *
+ * Each PRU has access to all data memories within the PRUSS, accessible at
+ * different ranges. So, look through both its primary and secondary Data
+ * RAMs as well as any shared Data RAM to convert a PRU device address to
+ * kernel virtual address. Data RAM0 is primary Data RAM for PRU0 and Data
+ * RAM1 is primary Data RAM for PRU1.
+ */
+static void *pru_d_da_to_va(struct pru_rproc *pru, u32 da, size_t len)
+{
+ struct pruss_mem_region dram0, dram1, shrd_ram;
+ struct pruss *pruss = pru->pruss;
+ u32 offset;
+ void *va = NULL;
+
+ if (len == 0)
+ return NULL;
+
+ dram0 = pruss->mem_regions[PRUSS_MEM_DRAM0];
+ dram1 = pruss->mem_regions[PRUSS_MEM_DRAM1];
+ /* PRU1 has its local RAM addresses reversed */
+ if (pru->id == 1)
+ swap(dram0, dram1);
+ shrd_ram = pruss->mem_regions[PRUSS_MEM_SHRD_RAM2];
+
+ if (da >= PRU_PDRAM_DA && da + len <= PRU_PDRAM_DA + dram0.size) {
+ offset = da - PRU_PDRAM_DA;
+ va = (__force void *)(dram0.va + offset);
+ } else if (da >= PRU_SDRAM_DA &&
+ da + len <= PRU_SDRAM_DA + dram1.size) {
+ offset = da - PRU_SDRAM_DA;
+ va = (__force void *)(dram1.va + offset);
+ } else if (da >= PRU_SHRDRAM_DA &&
+ da + len <= PRU_SHRDRAM_DA + shrd_ram.size) {
+ offset = da - PRU_SHRDRAM_DA;
+ va = (__force void *)(shrd_ram.va + offset);
+ }
+
+ return va;
+}
+
+/*
+ * Convert PRU device address (instruction space) to kernel virtual address.
+ *
+ * A PRU does not have an unified address space. Each PRU has its very own
+ * private Instruction RAM, and its device address is identical to that of
+ * its primary Data RAM device address.
+ */
+static void *pru_i_da_to_va(struct pru_rproc *pru, u32 da, size_t len)
+{
+ u32 offset;
+ void *va = NULL;
+
+ if (len == 0)
+ return NULL;
+
+ if (da >= PRU_IRAM_DA &&
+ da + len <= PRU_IRAM_DA + pru->mem_regions[PRU_IOMEM_IRAM].size) {
+ offset = da - PRU_IRAM_DA;
+ va = (__force void *)(pru->mem_regions[PRU_IOMEM_IRAM].va +
+ offset);
+ }
+
+ return va;
+}
+
+/*
+ * Provide address translations for only PRU Data RAMs through the remoteproc
+ * core for any PRU client drivers. The PRU Instruction RAM access is restricted
+ * only to the PRU loader code.
+ */
+static void *pru_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
+{
+ struct pru_rproc *pru = rproc->priv;
+
+ return pru_d_da_to_va(pru, da, len);
+}
+
+/* PRU-specific address translator used by PRU loader. */
+static void *pru_da_to_va(struct rproc *rproc, u64 da, size_t len, bool is_iram)
+{
+ struct pru_rproc *pru = rproc->priv;
+ void *va;
+
+ if (is_iram)
+ va = pru_i_da_to_va(pru, da, len);
+ else
+ va = pru_d_da_to_va(pru, da, len);
+
+ return va;
+}
+
+static struct rproc_ops pru_rproc_ops = {
+ .start = pru_rproc_start,
+ .stop = pru_rproc_stop,
+ .da_to_va = pru_rproc_da_to_va,
+};
+
+static int
+pru_rproc_load_elf_segments(struct rproc *rproc, const struct firmware *fw)
+{
+ struct device *dev = &rproc->dev;
+ struct elf32_hdr *ehdr;
+ struct elf32_phdr *phdr;
+ int i, ret = 0;
+ const u8 *elf_data = fw->data;
+
+ ehdr = (struct elf32_hdr *)elf_data;
+ phdr = (struct elf32_phdr *)(elf_data + ehdr->e_phoff);
+
+ /* go through the available ELF segments */
+ for (i = 0; i < ehdr->e_phnum; i++, phdr++) {
+ u32 da = phdr->p_paddr;
+ u32 memsz = phdr->p_memsz;
+ u32 filesz = phdr->p_filesz;
+ u32 offset = phdr->p_offset;
+ bool is_iram;
+ void *ptr;
+
+ if (phdr->p_type != PT_LOAD || !filesz)
+ continue;
+
+ dev_dbg(dev, "phdr: type %d da 0x%x memsz 0x%x filesz 0x%x\n",
+ phdr->p_type, da, memsz, filesz);
+
+ if (filesz > memsz) {
+ dev_err(dev, "bad phdr filesz 0x%x memsz 0x%x\n",
+ filesz, memsz);
+ ret = -EINVAL;
+ break;
+ }
+
+ if (offset + filesz > fw->size) {
+ dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n",
+ offset + filesz, fw->size);
+ ret = -EINVAL;
+ break;
+ }
+
+ /* grab the kernel address for this device address */
+ is_iram = phdr->p_flags & PF_X;
+ ptr = pru_da_to_va(rproc, da, memsz, is_iram);
+ if (!ptr) {
+ dev_err(dev, "bad phdr da 0x%x mem 0x%x\n", da, memsz);
+ ret = -EINVAL;
+ break;
+ }
+
+ memcpy(ptr, elf_data + phdr->p_offset, filesz);
+
+ /* skip the memzero logic performed by remoteproc ELF loader */
+ }
+
+ return ret;
+}
+
+/*
+ * Use a custom parse_fw callback function for dealing with PRU firmware
+ * specific sections.
+ */
+static int pru_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
+{
+ int ret;
+
+ /* load optional rsc table */
+ ret = rproc_elf_load_rsc_table(rproc, fw);
+ if (ret == -EINVAL)
+ dev_dbg(&rproc->dev, "no resource table found for this fw\n");
+ else if (ret)
+ return ret;
+
+ return 0;
+}
+
+/*
+ * Compute PRU id based on the IRAM addresses. The PRU IRAMs are
+ * always at a particular offset within the PRUSS address space.
+ */
+static int pru_rproc_set_id(struct pru_rproc *pru)
+{
+ int ret = 0;
+
+ switch (pru->mem_regions[PRU_IOMEM_IRAM].pa & PRU_IRAM_ADDR_MASK) {
+ case PRU0_IRAM_ADDR_MASK:
+ pru->id = 0;
+ break;
+ case PRU1_IRAM_ADDR_MASK:
+ pru->id = 1;
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int pru_rproc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct platform_device *ppdev = to_platform_device(dev->parent);
+ struct pru_rproc *pru;
+ const char *fw_name;
+ struct rproc *rproc = NULL;
+ struct resource *res;
+ int i, ret;
+ const char *mem_names[PRU_IOMEM_MAX] = { "iram", "control", "debug" };
+
+ ret = of_property_read_string(np, "firmware-name", &fw_name);
+ if (ret) {
+ dev_err(dev, "unable to retrieve firmware-name %d\n", ret);
+ return ret;
+ }
+
+ rproc = devm_rproc_alloc(dev, pdev->name, &pru_rproc_ops, fw_name,
+ sizeof(*pru));
+ if (!rproc) {
+ dev_err(dev, "rproc_alloc failed\n");
+ return -ENOMEM;
+ }
+ /* use a custom load function to deal with PRU-specific quirks */
+ rproc->ops->load = pru_rproc_load_elf_segments;
+
+ /* use a custom parse function to deal with PRU-specific resources */
+ rproc->ops->parse_fw = pru_rproc_parse_fw;
+
+ /* error recovery is not supported for PRUs */
+ rproc->recovery_disabled = true;
+
+ /*
+ * rproc_add will auto-boot the processor normally, but this is not
+ * desired with PRU client driven boot-flow methodology. A PRU
+ * application/client driver will boot the corresponding PRU
+ * remote-processor as part of its state machine either through the
+ * remoteproc sysfs interface or through the equivalent kernel API.
+ */
+ rproc->auto_boot = false;
+
+ pru = rproc->priv;
+ pru->dev = dev;
+ pru->pruss = platform_get_drvdata(ppdev);
+ pru->rproc = rproc;
+ pru->fw_name = fw_name;
+
+ for (i = 0; i < ARRAY_SIZE(mem_names); i++) {
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ mem_names[i]);
+ pru->mem_regions[i].va = devm_ioremap_resource(dev, res);
+ if (IS_ERR(pru->mem_regions[i].va)) {
+ dev_err(dev, "failed to parse and map memory resource %d %s\n",
+ i, mem_names[i]);
+ ret = PTR_ERR(pru->mem_regions[i].va);
+ return ret;
+ }
+ pru->mem_regions[i].pa = res->start;
+ pru->mem_regions[i].size = resource_size(res);
+
+ dev_dbg(dev, "memory %8s: pa %pa size 0x%zx va %pK\n",
+ mem_names[i], &pru->mem_regions[i].pa,
+ pru->mem_regions[i].size, pru->mem_regions[i].va);
+ }
+
+ ret = pru_rproc_set_id(pru);
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(pdev, rproc);
+
+ ret = devm_rproc_add(dev, pru->rproc);
+ if (ret) {
+ dev_err(dev, "rproc_add failed: %d\n", ret);
+ return ret;
+ }
+
+ dev_dbg(dev, "PRU rproc node %pOF probed successfully\n", np);
+
+ return 0;
+}
+
+static int pru_rproc_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rproc *rproc = platform_get_drvdata(pdev);
+
+ dev_dbg(dev, "%s: removing rproc %s\n", __func__, rproc->name);
+
+ return 0;
+}
+
+static const struct of_device_id pru_rproc_match[] = {
+ { .compatible = "ti,am3356-pru", },
+ { .compatible = "ti,am4376-pru", },
+ { .compatible = "ti,am5728-pru", },
+ { .compatible = "ti,k2g-pru", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pru_rproc_match);
+
+static struct platform_driver pru_rproc_driver = {
+ .driver = {
+ .name = "pru-rproc",
+ .of_match_table = pru_rproc_match,
+ .suppress_bind_attrs = true,
+ },
+ .probe = pru_rproc_probe,
+ .remove = pru_rproc_remove,
+};
+module_platform_driver(pru_rproc_driver);
+
+MODULE_AUTHOR("Suman Anna <s-anna@ti.com>");
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_AUTHOR("Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>");
+MODULE_DESCRIPTION("PRU-ICSS Remote Processor Driver");
+MODULE_LICENSE("GPL v2");
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.