diff options
Diffstat (limited to 'drivers/scsi/Kconfig')
| -rw-r--r-- | drivers/scsi/Kconfig | 52 |
1 files changed, 22 insertions, 30 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index a7881f8eb05e..17feff174f57 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -33,7 +33,7 @@ config SCSI Channel, and FireWire storage. To compile this driver as a module, choose M here and read - <file:Documentation/scsi/scsi.txt>. + <file:Documentation/scsi/scsi.rst>. The module will be called scsi_mod. However, do not compile this as a module if your root file system @@ -79,7 +79,7 @@ config BLK_DEV_SD CD-ROMs. To compile this driver as a module, choose M here and read - <file:Documentation/scsi/scsi.txt>. + <file:Documentation/scsi/scsi.rst>. The module will be called sd_mod. Do not compile this driver as a module if your root file system @@ -94,11 +94,11 @@ config CHR_DEV_ST If you want to use a SCSI tape drive under Linux, say Y and read the SCSI-HOWTO, available from <http://www.tldp.org/docs.html#howto>, and - <file:Documentation/scsi/st.txt> in the kernel source. This is NOT + <file:Documentation/scsi/st.rst> in the kernel source. This is NOT for SCSI CD-ROMs. To compile this driver as a module, choose M here and read - <file:Documentation/scsi/scsi.txt>. The module will be called st. + <file:Documentation/scsi/scsi.rst>. The module will be called st. config BLK_DEV_SR tristate "SCSI CDROM support" @@ -112,18 +112,9 @@ config BLK_DEV_SR Make sure to say Y or M to "ISO 9660 CD-ROM file system support". To compile this driver as a module, choose M here and read - <file:Documentation/scsi/scsi.txt>. + <file:Documentation/scsi/scsi.rst>. The module will be called sr_mod. -config BLK_DEV_SR_VENDOR - bool "Enable vendor-specific extensions (for SCSI CDROM)" - depends on BLK_DEV_SR - help - This enables the usage of vendor specific SCSI commands. This is - required to support multisession CDs with old NEC/TOSHIBA cdrom - drives (and HP Writers). If you have such a drive and get the first - session only, try saying Y here; everybody else says N. - config CHR_DEV_SG tristate "SCSI generic support" depends on SCSI @@ -142,10 +133,10 @@ config CHR_DEV_SG quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>). For other devices, it's possible that you'll have to write the driver software yourself. Please read the file - <file:Documentation/scsi/scsi-generic.txt> for more information. + <file:Documentation/scsi/scsi-generic.rst> for more information. To compile this driver as a module, choose M here and read - <file:Documentation/scsi/scsi.txt>. The module will be called sg. + <file:Documentation/scsi/scsi.rst>. The module will be called sg. If unsure, say N. @@ -158,12 +149,12 @@ config CHR_DEV_SCH don't need this for those tiny 6-slot cdrom changers. Media changers are listed as "Type: Medium Changer" in /proc/scsi/scsi. If you have such hardware and want to use it with linux, say Y - here. Check <file:Documentation/scsi/scsi-changer.txt> for details. + here. Check <file:Documentation/scsi/scsi-changer.rst> for details. If you want to compile this as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read <file:Documentation/kbuild/modules.rst> and - <file:Documentation/scsi/scsi.txt>. The module will be called ch.o. + <file:Documentation/scsi/scsi.rst>. The module will be called ch.o. If unsure, say N. config SCSI_ENCLOSURE @@ -392,7 +383,7 @@ config SCSI_AHA152X It is explained in section 3.3 of the SCSI-HOWTO, available from <http://www.tldp.org/docs.html#howto>. You might also want to - read the file <file:Documentation/scsi/aha152x.txt>. + read the file <file:Documentation/scsi/aha152x.rst>. To compile this driver as a module, choose M here: the module will be called aha152x. @@ -430,7 +421,7 @@ config SCSI_AACRAID help This driver supports a variety of Dell, HP, Adaptec, IBM and ICP storage products. For a list of supported products, refer - to <file:Documentation/scsi/aacraid.txt>. + to <file:Documentation/scsi/aacraid.rst>. To compile this driver as a module, choose M here: the module will be called aacraid. @@ -457,7 +448,7 @@ config SCSI_DPT_I2O help This driver supports all of Adaptec's I2O based RAID controllers as well as the DPT SmartRaid V cards. This is an Adaptec maintained - driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>. + driver by Deanna Bonds. See <file:Documentation/scsi/dpti.rst>. To compile this driver as a module, choose M here: the module will be called dpt_i2o. @@ -511,8 +502,8 @@ config SCSI_BUSLOGIC This is support for BusLogic MultiMaster and FlashPoint SCSI Host Adapters. Consult the SCSI-HOWTO, available from <http://www.tldp.org/docs.html#howto>, and the files - <file:Documentation/scsi/BusLogic.txt> and - <file:Documentation/scsi/FlashPoint.txt> for more information. + <file:Documentation/scsi/BusLogic.rst> and + <file:Documentation/scsi/FlashPoint.rst> for more information. Note that support for FlashPoint is only available for 32-bit x86 configurations. @@ -613,7 +604,7 @@ config FCOE_FNIC This is support for the Cisco PCI-Express FCoE HBA. To compile this driver as a module, choose M here and read - <file:Documentation/scsi/scsi.txt>. + <file:Documentation/scsi/scsi.rst>. The module will be called fnic. config SCSI_SNIC @@ -623,7 +614,7 @@ config SCSI_SNIC This is support for the Cisco PCI-Express SCSI HBA. To compile this driver as a module, choose M here and read - <file:Documentation/scsi/scsi.txt>. + <file:Documentation/scsi/scsi.rst>. The module will be called snic. config SCSI_SNIC_DEBUG_FS @@ -813,7 +804,7 @@ config SCSI_PPA newer drives)", below. For more information about this driver and how to use it you should - read the file <file:Documentation/scsi/ppa.txt>. You should also read + read the file <file:Documentation/scsi/ppa.rst>. You should also read the SCSI-HOWTO, which is available from <http://www.tldp.org/docs.html#howto>. If you use this driver, you will still be able to use the parallel port for other tasks, @@ -840,7 +831,7 @@ config SCSI_IMM here and Y to "IOMEGA Parallel Port (ppa - older drives)", above. For more information about this driver and how to use it you should - read the file <file:Documentation/scsi/ppa.txt>. You should also read + read the file <file:Documentation/scsi/ppa.rst>. You should also read the SCSI-HOWTO, which is available from <http://www.tldp.org/docs.html#howto>. If you use this driver, you will still be able to use the parallel port for other tasks, @@ -930,7 +921,7 @@ config SCSI_SYM53C8XX_2 language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI controllers; you need to use the Fusion MPT driver for that. - Please read <file:Documentation/scsi/sym53c8xx_2.txt> for more + Please read <file:Documentation/scsi/sym53c8xx_2.rst> for more information. config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE @@ -989,6 +980,7 @@ config SCSI_SYM53C8XX_MMIO config SCSI_IPR tristate "IBM Power Linux RAID adapter support" depends on PCI && SCSI && ATA + select SATA_HOST select FW_LOADER select IRQ_POLL select SGL_ALLOC @@ -1126,7 +1118,7 @@ config SCSI_QLOGIC_FAS SCSI support"), below. Information about this driver is contained in - <file:Documentation/scsi/qlogicfas.txt>. You should also read the + <file:Documentation/scsi/qlogicfas.rst>. You should also read the SCSI-HOWTO, available from <http://www.tldp.org/docs.html#howto>. @@ -1196,7 +1188,7 @@ config SCSI_DC395x This driver works, but is still in experimental status. So better have a bootable disk and a backup in case of emergency. - Documentation can be found in <file:Documentation/scsi/dc395x.txt>. + Documentation can be found in <file:Documentation/scsi/dc395x.rst>. To compile this driver as a module, choose M here: the module will be called dc395x. |