aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/dtc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/dtc.c')
-rw-r--r--drivers/scsi/dtc.c85
1 files changed, 30 insertions, 55 deletions
diff --git a/drivers/scsi/dtc.c b/drivers/scsi/dtc.c
index 0a667fe05006..4c74c7ba2dff 100644
--- a/drivers/scsi/dtc.c
+++ b/drivers/scsi/dtc.c
@@ -1,5 +1,4 @@
-#define AUTOSENSE
#define PSEUDO_DMA
#define DONT_USE_INTR
#define UNSAFE /* Leave interrupts enabled during pseudo-dma I/O */
@@ -18,29 +17,9 @@
* (Unix and Linux consulting and custom programming)
* drew@colorado.edu
* +1 (303) 440-4894
- *
- * DISTRIBUTION RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
-*/
+ */
/*
- * Options :
- * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
- * for commands that return with a CHECK CONDITION status.
- *
- * PSEUDO_DMA - enables PSEUDO-DMA hardware, should give a 3-4X performance
- * increase compared to polled I/O.
- *
- * PARITY - enable parity checking. Not supported.
- *
- * UNSAFE - leave interrupts enabled during pseudo-DMA transfers.
- * You probably want this.
- *
* The card is detected and initialized in one of several ways :
* 1. Autoprobe (default) - since the board is memory mapped,
* a BIOS signature is scanned for to locate the registers.
@@ -79,15 +58,11 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include "dtc.h"
#define AUTOPROBE_IRQ
#include "NCR5380.h"
-
-#define DTC_PUBLIC_RELEASE 2
-
/*
* The DTC3180 & 3280 boards are memory mapped.
*
@@ -173,10 +148,13 @@ static const struct signature {
*
*/
-static void __init dtc_setup(char *str, int *ints)
+static int __init dtc_setup(char *str)
{
static int commandline_current = 0;
int i;
+ int ints[10];
+
+ get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] != 2)
printk("dtc_setup: usage dtc=address,irq\n");
else if (commandline_current < NO_OVERRIDES) {
@@ -189,7 +167,10 @@ static void __init dtc_setup(char *str, int *ints)
}
++commandline_current;
}
+ return 1;
}
+
+__setup("dtc=", dtc_setup);
#endif
/*
@@ -213,10 +194,6 @@ static int __init dtc_detect(struct scsi_host_template * tpnt)
void __iomem *base;
int sig, count;
- tpnt->proc_name = "dtc3x80";
- tpnt->show_info = dtc_show_info;
- tpnt->write_info = dtc_write_info;
-
for (count = 0; current_override < NO_OVERRIDES; ++current_override) {
addr = 0;
base = NULL;
@@ -271,38 +248,33 @@ found:
else
instance->irq = NCR5380_probe_irq(instance, DTC_IRQS);
+ /* Compatibility with documented NCR5380 kernel parameters */
+ if (instance->irq == 255)
+ instance->irq = NO_IRQ;
+
#ifndef DONT_USE_INTR
/* With interrupts enabled, it will sometimes hang when doing heavy
* reads. So better not enable them until I finger it out. */
- if (instance->irq != SCSI_IRQ_NONE)
+ if (instance->irq != NO_IRQ)
if (request_irq(instance->irq, dtc_intr, 0,
"dtc", instance)) {
printk(KERN_ERR "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
- instance->irq = SCSI_IRQ_NONE;
+ instance->irq = NO_IRQ;
}
- if (instance->irq == SCSI_IRQ_NONE) {
+ if (instance->irq == NO_IRQ) {
printk(KERN_WARNING "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk(KERN_WARNING "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}
#else
- if (instance->irq != SCSI_IRQ_NONE)
+ if (instance->irq != NO_IRQ)
printk(KERN_WARNING "scsi%d : interrupts not used. Might as well not jumper it.\n", instance->host_no);
- instance->irq = SCSI_IRQ_NONE;
+ instance->irq = NO_IRQ;
#endif
#if defined(DTCDEBUG) && (DTCDEBUG & DTCDEBUG_INIT)
printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
#endif
- printk(KERN_INFO "scsi%d : at 0x%05X", instance->host_no, (int) instance->base);
- if (instance->irq == SCSI_IRQ_NONE)
- printk(" interrupts disabled");
- else
- printk(" irq %d", instance->irq);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", CAN_QUEUE, CMD_PER_LUN, DTC_PUBLIC_RELEASE);
- NCR5380_print_options(instance);
- printk("\n");
-
++current_override;
++count;
}
@@ -354,20 +326,18 @@ static int dtc_biosparam(struct scsi_device *sdev, struct block_device *dev,
* timeout.
*/
-static int dtc_maxi = 0;
-static int dtc_wmaxi = 0;
-
static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
{
unsigned char *d = dst;
int i; /* For counting time spent in the poll-loop */
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
NCR5380_local_declare();
NCR5380_setup(instance);
i = 0;
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE);
- if (instance->irq == SCSI_IRQ_NONE)
+ if (instance->irq == NO_IRQ)
NCR5380_write(DTC_CONTROL_REG, CSR_DIR_READ);
else
NCR5380_write(DTC_CONTROL_REG, CSR_DIR_READ | CSR_INT_BASE);
@@ -391,8 +361,8 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
NCR5380_write(MODE_REG, 0); /* Clear the operating mode */
rtrc(0);
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- if (i > dtc_maxi)
- dtc_maxi = i;
+ if (i > hostdata->spin_max_r)
+ hostdata->spin_max_r = i;
return (0);
}
@@ -412,13 +382,14 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
{
int i;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
NCR5380_local_declare();
NCR5380_setup(instance);
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE);
/* set direction (write) */
- if (instance->irq == SCSI_IRQ_NONE)
+ if (instance->irq == NO_IRQ)
NCR5380_write(DTC_CONTROL_REG, 0);
else
NCR5380_write(DTC_CONTROL_REG, CSR_5380_INTR);
@@ -444,8 +415,8 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
/* Check for parity error here. fixme. */
NCR5380_write(MODE_REG, 0); /* Clear the operating mode */
rtrc(0);
- if (i > dtc_wmaxi)
- dtc_wmaxi = i;
+ if (i > hostdata->spin_max_w)
+ hostdata->spin_max_w = i;
return (0);
}
@@ -457,7 +428,7 @@ static int dtc_release(struct Scsi_Host *shost)
{
NCR5380_local_declare();
NCR5380_setup(shost);
- if (shost->irq)
+ if (shost->irq != NO_IRQ)
free_irq(shost->irq, shost);
NCR5380_exit(shost);
if (shost->io_port && shost->n_io_port)
@@ -471,6 +442,10 @@ static struct scsi_host_template driver_template = {
.name = "DTC 3180/3280 ",
.detect = dtc_detect,
.release = dtc_release,
+ .proc_name = "dtc3x80",
+ .show_info = dtc_show_info,
+ .write_info = dtc_write_info,
+ .info = dtc_info,
.queuecommand = dtc_queue_command,
.eh_abort_handler = dtc_abort,
.eh_bus_reset_handler = dtc_bus_reset,
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.