diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_attr.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 107 |
1 files changed, 86 insertions, 21 deletions
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index ac77081e6e9e..2ac1d21c553f 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2017 Broadcom. All Rights Reserved. The term * + * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term * * “Broadcom” refers to Broadcom Limited and/or its subsidiaries. * * Copyright (C) 2004-2016 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * @@ -259,6 +259,12 @@ lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr, atomic_read(&tgtp->xmt_abort_rsp), atomic_read(&tgtp->xmt_abort_rsp_error)); + len += snprintf(buf + len, PAGE_SIZE - len, + "DELAY: ctx %08x fod %08x wqfull %08x\n", + atomic_read(&tgtp->defer_ctx), + atomic_read(&tgtp->defer_fod), + atomic_read(&tgtp->defer_wqfull)); + /* Calculate outstanding IOs */ tot = atomic_read(&tgtp->rcv_fcp_cmd_drop); tot += atomic_read(&tgtp->xmt_fcp_release); @@ -905,7 +911,12 @@ lpfc_issue_lip(struct Scsi_Host *shost) LPFC_MBOXQ_t *pmboxq; int mbxstatus = MBXERR_ERROR; + /* + * If the link is offline, disabled or BLOCK_MGMT_IO + * it doesn't make any sense to allow issue_lip + */ if ((vport->fc_flag & FC_OFFLINE_MODE) || + (phba->hba_flag & LINK_DISABLED) || (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)) return -EPERM; @@ -3458,8 +3469,8 @@ LPFC_VPORT_ATTR_R(lun_queue_depth, 30, 1, 512, # tgt_queue_depth: This parameter is used to limit the number of outstanding # commands per target port. Value range is [10,65535]. Default value is 65535. */ -LPFC_VPORT_ATTR_R(tgt_queue_depth, 65535, 10, 65535, - "Max number of FCP commands we can queue to a specific target port"); +LPFC_VPORT_ATTR_RW(tgt_queue_depth, 65535, 10, 65535, + "Max number of FCP commands we can queue to a specific target port"); /* # hba_queue_depth: This parameter is used to limit the number of outstanding @@ -4104,23 +4115,32 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr, ((val == LPFC_USER_LINK_SPEED_8G) && !(phba->lmt & LMT_8Gb)) || ((val == LPFC_USER_LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)) || ((val == LPFC_USER_LINK_SPEED_16G) && !(phba->lmt & LMT_16Gb)) || - ((val == LPFC_USER_LINK_SPEED_32G) && !(phba->lmt & LMT_32Gb))) { + ((val == LPFC_USER_LINK_SPEED_32G) && !(phba->lmt & LMT_32Gb)) || + ((val == LPFC_USER_LINK_SPEED_64G) && !(phba->lmt & LMT_64Gb))) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2879 lpfc_link_speed attribute cannot be set " "to %d. Speed is not supported by this port.\n", val); return -EINVAL; } - if (val == LPFC_USER_LINK_SPEED_16G && - phba->fc_topology == LPFC_TOPOLOGY_LOOP) { + if (val >= LPFC_USER_LINK_SPEED_16G && + phba->fc_topology == LPFC_TOPOLOGY_LOOP) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "3112 lpfc_link_speed attribute cannot be set " "to %d. Speed is not supported in loop mode.\n", val); return -EINVAL; } - if ((val >= 0) && (val <= LPFC_USER_LINK_SPEED_MAX) && - (LPFC_USER_LINK_SPEED_BITMAP & (1 << val))) { + + switch (val) { + case LPFC_USER_LINK_SPEED_AUTO: + case LPFC_USER_LINK_SPEED_1G: + case LPFC_USER_LINK_SPEED_2G: + case LPFC_USER_LINK_SPEED_4G: + case LPFC_USER_LINK_SPEED_8G: + case LPFC_USER_LINK_SPEED_16G: + case LPFC_USER_LINK_SPEED_32G: + case LPFC_USER_LINK_SPEED_64G: prev_val = phba->cfg_link_speed; phba->cfg_link_speed = val; if (nolip) @@ -4130,13 +4150,18 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr, if (err) { phba->cfg_link_speed = prev_val; return -EINVAL; - } else - return strlen(buf); + } + return strlen(buf); + default: + break; } + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0469 lpfc_link_speed attribute cannot be set to %d, " - "allowed values are ["LPFC_LINK_SPEED_STRING"]\n", val); + "0469 lpfc_link_speed attribute cannot be set to %d, " + "allowed values are [%s]\n", + val, LPFC_LINK_SPEED_STRING); return -EINVAL; + } static int lpfc_link_speed = 0; @@ -4163,24 +4188,33 @@ lpfc_param_show(link_speed) static int lpfc_link_speed_init(struct lpfc_hba *phba, int val) { - if (val == LPFC_USER_LINK_SPEED_16G && phba->cfg_topology == 4) { + if (val >= LPFC_USER_LINK_SPEED_16G && phba->cfg_topology == 4) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "3111 lpfc_link_speed of %d cannot " "support loop mode, setting topology to default.\n", val); phba->cfg_topology = 0; } - if ((val >= 0) && (val <= LPFC_USER_LINK_SPEED_MAX) && - (LPFC_USER_LINK_SPEED_BITMAP & (1 << val))) { + + switch (val) { + case LPFC_USER_LINK_SPEED_AUTO: + case LPFC_USER_LINK_SPEED_1G: + case LPFC_USER_LINK_SPEED_2G: + case LPFC_USER_LINK_SPEED_4G: + case LPFC_USER_LINK_SPEED_8G: + case LPFC_USER_LINK_SPEED_16G: + case LPFC_USER_LINK_SPEED_32G: + case LPFC_USER_LINK_SPEED_64G: phba->cfg_link_speed = val; return 0; + default: + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0405 lpfc_link_speed attribute cannot " + "be set to %d, allowed values are " + "["LPFC_LINK_SPEED_STRING"]\n", val); + phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO; + return -EINVAL; } - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0405 lpfc_link_speed attribute cannot " - "be set to %d, allowed values are " - "["LPFC_LINK_SPEED_STRING"]\n", val); - phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO; - return -EINVAL; } static DEVICE_ATTR_RW(lpfc_link_speed); @@ -5008,6 +5042,18 @@ LPFC_ATTR_RW(nvme_oas, 0, 0, 1, "Use OAS bit on NVME IOs"); /* + * lpfc_nvme_embed_cmd: Use the oas bit when sending NVME/NVMET IOs + * + * 0 = Put NVME Command in SGL + * 1 = Embed NVME Command in WQE (unless G7) + * 2 = Embed NVME Command in WQE (force) + * + * Value range is [0,2]. Default value is 1. + */ +LPFC_ATTR_RW(nvme_embed_cmd, 1, 0, 2, + "Embed NVME Command in WQE"); + +/* * lpfc_fcp_io_channel: Set the number of FCP IO channels the driver * will advertise it supports to the SCSI layer. This also will map to * the number of WQs the driver will create. @@ -5175,6 +5221,14 @@ LPFC_ATTR_R(enable_mds_diags, 0, 0, 1, "Enable MDS Diagnostics"); */ LPFC_BBCR_ATTR_RW(enable_bbcr, 1, 0, 1, "Enable BBC Recovery"); +/* + * lpfc_enable_dpp: Enable DPP on G7 + * 0 = DPP on G7 disabled + * 1 = DPP on G7 enabled (default) + * Value range is [0,1]. Default value is 1. + */ +LPFC_ATTR_RW(enable_dpp, 1, 0, 1, "Enable Direct Packet Push"); + struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_nvme_info, &dev_attr_bg_info, @@ -5240,6 +5294,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_task_mgmt_tmo, &dev_attr_lpfc_use_msi, &dev_attr_lpfc_nvme_oas, + &dev_attr_lpfc_nvme_embed_cmd, &dev_attr_lpfc_auto_imax, &dev_attr_lpfc_fcp_imax, &dev_attr_lpfc_fcp_cpu_map, @@ -5283,6 +5338,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_xlane_supported, &dev_attr_lpfc_enable_mds_diags, &dev_attr_lpfc_enable_bbcr, + &dev_attr_lpfc_enable_dpp, NULL, }; @@ -5696,6 +5752,9 @@ lpfc_get_host_speed(struct Scsi_Host *shost) case LPFC_LINK_SPEED_32GHZ: fc_host_speed(shost) = FC_PORTSPEED_32GBIT; break; + case LPFC_LINK_SPEED_64GHZ: + fc_host_speed(shost) = FC_PORTSPEED_64GBIT; + break; default: fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN; break; @@ -6260,6 +6319,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_enable_SmartSAN_init(phba, lpfc_enable_SmartSAN); lpfc_use_msi_init(phba, lpfc_use_msi); lpfc_nvme_oas_init(phba, lpfc_nvme_oas); + lpfc_nvme_embed_cmd_init(phba, lpfc_nvme_embed_cmd); lpfc_auto_imax_init(phba, lpfc_auto_imax); lpfc_fcp_imax_init(phba, lpfc_fcp_imax); lpfc_fcp_cpu_map_init(phba, lpfc_fcp_cpu_map); @@ -6284,6 +6344,10 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) phba->cfg_poll = 0; else phba->cfg_poll = lpfc_poll; + + if (phba->cfg_enable_bg) + phba->sli3_options |= LPFC_SLI3_BG_ENABLED; + lpfc_suppress_rsp_init(phba, lpfc_suppress_rsp); lpfc_enable_fc4_type_init(phba, lpfc_enable_fc4_type); @@ -6295,6 +6359,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_fcp_io_channel_init(phba, lpfc_fcp_io_channel); lpfc_nvme_io_channel_init(phba, lpfc_nvme_io_channel); lpfc_enable_bbcr_init(phba, lpfc_enable_bbcr); + lpfc_enable_dpp_init(phba, lpfc_enable_dpp); if (phba->sli_rev != LPFC_SLI_REV4) { /* NVME only supported on SLI4 */ |