diff options
Diffstat (limited to 'drivers/scsi/megaraid/megaraid_sas.c')
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_sas.c | 119 |
1 files changed, 116 insertions, 3 deletions
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index fc7ac158476c..97b763378e7d 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_sas.c - * Version : v00.00.03.20-rc1 + * Version : v00.00.04.01-rc1 * * Authors: * (email-id : megaraidlinux@lsi.com) @@ -71,6 +71,10 @@ static struct pci_device_id megasas_pci_table[] = { /* ppc IOP */ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078DE)}, /* ppc IOP */ + {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078GEN2)}, + /* gen2*/ + {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0079GEN2)}, + /* gen2*/ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VERDE_ZCR)}, /* xscale IOP, vega */ {PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)}, @@ -198,6 +202,9 @@ megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs) */ writel(status, ®s->outbound_intr_status); + /* Dummy readl to force pci flush */ + readl(®s->outbound_intr_status); + return 0; } @@ -293,6 +300,9 @@ megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs) */ writel(status, ®s->outbound_doorbell_clear); + /* Dummy readl to force pci flush */ + readl(®s->outbound_doorbell_clear); + return 0; } /** @@ -318,6 +328,99 @@ static struct megasas_instance_template megasas_instance_template_ppc = { }; /** +* The following functions are defined for gen2 (deviceid : 0x78 0x79) +* controllers +*/ + +/** + * megasas_enable_intr_gen2 - Enables interrupts + * @regs: MFI register set + */ +static inline void +megasas_enable_intr_gen2(struct megasas_register_set __iomem *regs) +{ + writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear); + + /* write ~0x00000005 (4 & 1) to the intr mask*/ + writel(~MFI_GEN2_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask); + + /* Dummy readl to force pci flush */ + readl(®s->outbound_intr_mask); +} + +/** + * megasas_disable_intr_gen2 - Disables interrupt + * @regs: MFI register set + */ +static inline void +megasas_disable_intr_gen2(struct megasas_register_set __iomem *regs) +{ + u32 mask = 0xFFFFFFFF; + writel(mask, ®s->outbound_intr_mask); + /* Dummy readl to force pci flush */ + readl(®s->outbound_intr_mask); +} + +/** + * megasas_read_fw_status_reg_gen2 - returns the current FW status value + * @regs: MFI register set + */ +static u32 +megasas_read_fw_status_reg_gen2(struct megasas_register_set __iomem *regs) +{ + return readl(&(regs)->outbound_scratch_pad); +} + +/** + * megasas_clear_interrupt_gen2 - Check & clear interrupt + * @regs: MFI register set + */ +static int +megasas_clear_intr_gen2(struct megasas_register_set __iomem *regs) +{ + u32 status; + /* + * Check if it is our interrupt + */ + status = readl(®s->outbound_intr_status); + + if (!(status & MFI_GEN2_ENABLE_INTERRUPT_MASK)) + return 1; + + /* + * Clear the interrupt by writing back the same value + */ + writel(status, ®s->outbound_doorbell_clear); + + /* Dummy readl to force pci flush */ + readl(®s->outbound_intr_status); + + return 0; +} +/** + * megasas_fire_cmd_gen2 - Sends command to the FW + * @frame_phys_addr : Physical address of cmd + * @frame_count : Number of frames for the command + * @regs : MFI register set + */ +static inline void +megasas_fire_cmd_gen2(dma_addr_t frame_phys_addr, u32 frame_count, + struct megasas_register_set __iomem *regs) +{ + writel((frame_phys_addr | (frame_count<<1))|1, + &(regs)->inbound_queue_port); +} + +static struct megasas_instance_template megasas_instance_template_gen2 = { + + .fire_cmd = megasas_fire_cmd_gen2, + .enable_intr = megasas_enable_intr_gen2, + .disable_intr = megasas_disable_intr_gen2, + .clear_intr = megasas_clear_intr_gen2, + .read_fw_status_reg = megasas_read_fw_status_reg_gen2, +}; + +/** * This is the end of set of functions & definitions * specific to ppc (deviceid : 0x60) controllers */ @@ -1976,7 +2079,12 @@ static int megasas_init_mfi(struct megasas_instance *instance) /* * Map the message registers */ - instance->base_addr = pci_resource_start(instance->pdev, 0); + if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1078GEN2) || + (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0079GEN2)) { + instance->base_addr = pci_resource_start(instance->pdev, 1); + } else { + instance->base_addr = pci_resource_start(instance->pdev, 0); + } if (pci_request_regions(instance->pdev, "megasas: LSI")) { printk(KERN_DEBUG "megasas: IO memory region busy!\n"); @@ -1998,6 +2106,10 @@ static int megasas_init_mfi(struct megasas_instance *instance) case PCI_DEVICE_ID_LSI_SAS1078DE: instance->instancet = &megasas_instance_template_ppc; break; + case PCI_DEVICE_ID_LSI_SAS1078GEN2: + case PCI_DEVICE_ID_LSI_SAS0079GEN2: + instance->instancet = &megasas_instance_template_gen2; + break; case PCI_DEVICE_ID_LSI_SAS1064R: case PCI_DEVICE_ID_DELL_PERC5: default: @@ -2857,6 +2969,7 @@ static void megasas_shutdown(struct pci_dev *pdev) { struct megasas_instance *instance = pci_get_drvdata(pdev); megasas_flush_cache(instance); + megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN); } /** @@ -3292,7 +3405,7 @@ megasas_sysfs_set_dbg_lvl(struct device_driver *dd, const char *buf, size_t coun return retval; } -static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUGO, megasas_sysfs_show_dbg_lvl, +static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUSR, megasas_sysfs_show_dbg_lvl, megasas_sysfs_set_dbg_lvl); static ssize_t |