1 files changed, 122 insertions, 50 deletions

diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 0ec1ed389c20..57bcd5c9dcff 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -95,6 +95,10 @@ int mpt2sas_fwfault_debug;
 MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
     "and halt firmware - (default=0)");
 
+static int disable_discovery = -1;
+module_param(disable_discovery, int, 0);
+MODULE_PARM_DESC(disable_discovery, " disable discovery ");
+
 /**
  * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
  *
@@ -1238,7 +1242,7 @@ mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc)
 	u64 pio_chip = 0;
 	u64 chip_phys = 0;
 
-	dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n",
+	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n",
 	    ioc->name, __func__));
 
 	ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
@@ -1307,6 +1311,9 @@ mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc)
 	printk(MPT2SAS_INFO_FMT "ioport(0x%016llx), size(%d)\n",
 	    ioc->name, (unsigned long long)pio_chip, pio_sz);
 
+	/* Save PCI configuration state for recovery from PCI AER/EEH errors */
+	pci_save_state(pdev);
+
 	return 0;
 
  out_fail:
@@ -1861,7 +1868,7 @@ _base_static_config_pages(struct MPT2SAS_ADAPTER *ioc)
 static void
 _base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc)
 {
-	dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+	dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
 	    __func__));
 
 	if (ioc->request) {
@@ -1947,7 +1954,7 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	u32 retry_sz;
 	u16 max_request_credit;
 
-	dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
 	    __func__));
 
 	retry_sz = 0;
@@ -2374,7 +2381,7 @@ _base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER *ioc, int timeout,
 	do {
 		int_status = readl(&ioc->chip->HostInterruptStatus);
 		if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
-			dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+			dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
 			    "successfull count(%d), timeout(%d)\n", ioc->name,
 			    __func__, count, timeout));
 			return 0;
@@ -2415,7 +2422,7 @@ _base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER *ioc, int timeout,
 	do {
 		int_status = readl(&ioc->chip->HostInterruptStatus);
 		if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
-			dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+			dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
 			    "successfull count(%d), timeout(%d)\n", ioc->name,
 			    __func__, count, timeout));
 			return 0;
@@ -2463,7 +2470,7 @@ _base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER *ioc, int timeout,
 	do {
 		doorbell_reg = readl(&ioc->chip->Doorbell);
 		if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
-			dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+			dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
 			    "successfull count(%d), timeout(%d)\n", ioc->name,
 			    __func__, count, timeout));
 			return 0;
@@ -2637,9 +2644,9 @@ _base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER *ioc, int request_bytes,
 
 	if (ioc->logging_level & MPT_DEBUG_INIT) {
 		mfp = (u32 *)reply;
-		printk(KERN_DEBUG "\toffset:data\n");
+		printk(KERN_INFO "\toffset:data\n");
 		for (i = 0; i < reply_bytes/4; i++)
-			printk(KERN_DEBUG "\t[0x%02x]:%08x\n", i*4,
+			printk(KERN_INFO "\t[0x%02x]:%08x\n", i*4,
 			    le32_to_cpu(mfp[i]));
 	}
 	return 0;
@@ -2672,7 +2679,7 @@ mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc,
 	void *request;
 	u16 wait_state_count;
 
-	dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
 	    __func__));
 
 	mutex_lock(&ioc->base_cmds.mutex);
@@ -2777,7 +2784,7 @@ mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc,
 	void *request;
 	u16 wait_state_count;
 
-	dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
 	    __func__));
 
 	mutex_lock(&ioc->base_cmds.mutex);
@@ -2865,7 +2872,7 @@ _base_get_port_facts(struct MPT2SAS_ADAPTER *ioc, int port, int sleep_flag)
 	Mpi2PortFactsReply_t mpi_reply, *pfacts;
 	int mpi_reply_sz, mpi_request_sz, r;
 
-	dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
 	    __func__));
 
 	mpi_reply_sz = sizeof(Mpi2PortFactsReply_t);
@@ -2907,7 +2914,7 @@ _base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 	Mpi2IOCFactsReply_t mpi_reply, *facts;
 	int mpi_reply_sz, mpi_request_sz, r;
 
-	dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
 	    __func__));
 
 	mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
@@ -2979,7 +2986,7 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 	struct timeval current_time;
 	u16 ioc_status;
 
-	dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
 	    __func__));
 
 	memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t));
@@ -3040,9 +3047,9 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 		int i;
 
 		mfp = (u32 *)&mpi_request;
-		printk(KERN_DEBUG "\toffset:data\n");
+		printk(KERN_INFO "\toffset:data\n");
 		for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++)
-			printk(KERN_DEBUG "\t[0x%02x]:%08x\n", i*4,
+			printk(KERN_INFO "\t[0x%02x]:%08x\n", i*4,
 			    le32_to_cpu(mfp[i]));
 	}
 
@@ -3121,7 +3128,7 @@ _base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 			r = -ETIME;
 		goto out;
 	} else
-		dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: complete\n",
+		dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: complete\n",
 		    ioc->name, __func__));
 
 	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_OPERATIONAL,
@@ -3181,7 +3188,7 @@ _base_event_notification(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 	int r = 0;
 	int i;
 
-	dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
 	    __func__));
 
 	if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
@@ -3219,7 +3226,7 @@ _base_event_notification(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 		else
 			r = -ETIME;
 	} else
-		dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: complete\n",
+		dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: complete\n",
 		    ioc->name, __func__));
 	ioc->base_cmds.status = MPT2_CMD_NOT_USED;
 	return r;
@@ -3281,7 +3288,7 @@ _base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 
 	_base_save_msix_table(ioc);
 
-	drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "clear interrupts\n",
+	drsprintk(ioc, printk(MPT2SAS_INFO_FMT "clear interrupts\n",
 	    ioc->name));
 
 	count = 0;
@@ -3289,7 +3296,7 @@ _base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 		/* Write magic sequence to WriteSequence register
 		 * Loop until in diagnostic mode
 		 */
-		drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "write magic "
+		drsprintk(ioc, printk(MPT2SAS_INFO_FMT "write magic "
 		    "sequence\n", ioc->name));
 		writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
 		writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence);
@@ -3309,7 +3316,7 @@ _base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 			goto out;
 
 		host_diagnostic = readl(&ioc->chip->HostDiagnostic);
-		drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "wrote magic "
+		drsprintk(ioc, printk(MPT2SAS_INFO_FMT "wrote magic "
 		    "sequence: count(%d), host_diagnostic(0x%08x)\n",
 		    ioc->name, count, host_diagnostic));
 
@@ -3317,7 +3324,7 @@ _base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 
 	hcb_size = readl(&ioc->chip->HCBSize);
 
-	drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "diag reset: issued\n",
+	drsprintk(ioc, printk(MPT2SAS_INFO_FMT "diag reset: issued\n",
 	    ioc->name));
 	writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER,
 	     &ioc->chip->HostDiagnostic);
@@ -3344,29 +3351,29 @@ _base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 
 	if (host_diagnostic & MPI2_DIAG_HCB_MODE) {
 
-		drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "restart the adapter "
+		drsprintk(ioc, printk(MPT2SAS_INFO_FMT "restart the adapter "
 		    "assuming the HCB Address points to good F/W\n",
 		    ioc->name));
 		host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK;
 		host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW;
 		writel(host_diagnostic, &ioc->chip->HostDiagnostic);
 
-		drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT
+		drsprintk(ioc, printk(MPT2SAS_INFO_FMT
 		    "re-enable the HCDW\n", ioc->name));
 		writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE,
 		    &ioc->chip->HCBSize);
 	}
 
-	drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "restart the adapter\n",
+	drsprintk(ioc, printk(MPT2SAS_INFO_FMT "restart the adapter\n",
 	    ioc->name));
 	writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET,
 	    &ioc->chip->HostDiagnostic);
 
-	drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "disable writes to the "
+	drsprintk(ioc, printk(MPT2SAS_INFO_FMT "disable writes to the "
 	    "diagnostic register\n", ioc->name));
 	writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
 
-	drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "Wait for FW to go to the "
+	drsprintk(ioc, printk(MPT2SAS_INFO_FMT "Wait for FW to go to the "
 	    "READY state\n", ioc->name));
 	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20,
 	    sleep_flag);
@@ -3398,19 +3405,23 @@ _base_make_ioc_ready(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
     enum reset_type type)
 {
 	u32 ioc_state;
+	int rc;
 
-	dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
 	    __func__));
 
+	if (ioc->pci_error_recovery)
+		return 0;
+
 	ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
-	dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: ioc_state(0x%08x)\n",
+	dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: ioc_state(0x%08x)\n",
 	    ioc->name, __func__, ioc_state));
 
 	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY)
 		return 0;
 
 	if (ioc_state & MPI2_DOORBELL_USED) {
-		dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "unexpected doorbell "
+		dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "unexpected doorbell "
 		    "active!\n", ioc->name));
 		goto issue_diag_reset;
 	}
@@ -3426,11 +3437,15 @@ _base_make_ioc_ready(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
 
 	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
 		if (!(_base_send_ioc_reset(ioc,
-		    MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP)))
+		    MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) {
+			ioc->ioc_reset_count++;
 			return 0;
+	}
 
  issue_diag_reset:
-	return _base_diag_reset(ioc, CAN_SLEEP);
+	rc = _base_diag_reset(ioc, CAN_SLEEP);
+	ioc->ioc_reset_count++;
+	return rc;
 }
 
 /**
@@ -3449,7 +3464,7 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 	u16 smid;
 	struct _tr_list *delayed_tr, *delayed_tr_next;
 
-	dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
 	    __func__));
 
 	/* clean the delayed target reset list */
@@ -3459,6 +3474,12 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 		kfree(delayed_tr);
 	}
 
+	list_for_each_entry_safe(delayed_tr, delayed_tr_next,
+	    &ioc->delayed_tr_volume_list, list) {
+		list_del(&delayed_tr->list);
+		kfree(delayed_tr);
+	}
+
 	/* initialize the scsi lookup free list */
 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
 	INIT_LIST_HEAD(&ioc->free_list);
@@ -3520,6 +3541,13 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 	if (sleep_flag == CAN_SLEEP)
 		_base_static_config_pages(ioc);
 
+	if (ioc->wait_for_port_enable_to_complete) {
+		if (diag_buffer_enable != 0)
+			mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
+		if (disable_discovery > 0)
+			return r;
+	}
+
 	r = _base_send_port_enable(ioc, sleep_flag);
 	if (r)
 		return r;
@@ -3538,7 +3566,7 @@ mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc)
 {
 	struct pci_dev *pdev = ioc->pdev;
 
-	dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+	dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
 	    __func__));
 
 	_base_mask_interrupts(ioc);
@@ -3571,7 +3599,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 {
 	int r, i;
 
-	dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
 	    __func__));
 
 	r = mpt2sas_base_map_resources(ioc);
@@ -3606,6 +3634,17 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 
 	init_waitqueue_head(&ioc->reset_wq);
 
+	/* allocate memory pd handle bitmask list */
+	ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8);
+	if (ioc->facts.MaxDevHandle % 8)
+		ioc->pd_handles_sz++;
+	ioc->pd_handles = kzalloc(ioc->pd_handles_sz,
+	    GFP_KERNEL);
+	if (!ioc->pd_handles) {
+		r = -ENOMEM;
+		goto out_free_resources;
+	}
+
 	ioc->fwfault_debug = mpt2sas_fwfault_debug;
 
 	/* base internal command bits */
@@ -3635,11 +3674,20 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 
 	/* ctl module internal command bits */
 	ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+	ioc->ctl_cmds.sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
 	ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
 	mutex_init(&ioc->ctl_cmds.mutex);
 
 	if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply ||
 	    !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply ||
+	    !ioc->config_cmds.reply || !ioc->ctl_cmds.reply ||
+	    !ioc->ctl_cmds.sense) {
+		r = -ENOMEM;
+		goto out_free_resources;
+	}
+
+	if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply ||
+	    !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply ||
 	    !ioc->config_cmds.reply || !ioc->ctl_cmds.reply) {
 		r = -ENOMEM;
 		goto out_free_resources;
@@ -3667,8 +3715,6 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 		goto out_free_resources;
 
 	mpt2sas_base_start_watchdog(ioc);
-	if (diag_buffer_enable != 0)
-		mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
 	return 0;
 
  out_free_resources:
@@ -3677,12 +3723,14 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 	mpt2sas_base_free_resources(ioc);
 	_base_release_memory_pools(ioc);
 	pci_set_drvdata(ioc->pdev, NULL);
+	kfree(ioc->pd_handles);
 	kfree(ioc->tm_cmds.reply);
 	kfree(ioc->transport_cmds.reply);
 	kfree(ioc->scsih_cmds.reply);
 	kfree(ioc->config_cmds.reply);
 	kfree(ioc->base_cmds.reply);
 	kfree(ioc->ctl_cmds.reply);
+	kfree(ioc->ctl_cmds.sense);
 	kfree(ioc->pfacts);
 	ioc->ctl_cmds.reply = NULL;
 	ioc->base_cmds.reply = NULL;
@@ -3705,15 +3753,17 @@ void
 mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc)
 {
 
-	dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+	dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
 	    __func__));
 
 	mpt2sas_base_stop_watchdog(ioc);
 	mpt2sas_base_free_resources(ioc);
 	_base_release_memory_pools(ioc);
 	pci_set_drvdata(ioc->pdev, NULL);
+	kfree(ioc->pd_handles);
 	kfree(ioc->pfacts);
 	kfree(ioc->ctl_cmds.reply);
+	kfree(ioc->ctl_cmds.sense);
 	kfree(ioc->base_cmds.reply);
 	kfree(ioc->tm_cmds.reply);
 	kfree(ioc->transport_cmds.reply);
@@ -3738,11 +3788,11 @@ _base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
 {
 	switch (reset_phase) {
 	case MPT2_IOC_PRE_RESET:
-		dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
 		    "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
 		break;
 	case MPT2_IOC_AFTER_RESET:
-		dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
 		    "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
 		if (ioc->transport_cmds.status & MPT2_CMD_PENDING) {
 			ioc->transport_cmds.status |= MPT2_CMD_RESET;
@@ -3762,7 +3812,7 @@ _base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
 		}
 		break;
 	case MPT2_IOC_DONE_RESET:
-		dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
 		    "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
 		break;
 	}
@@ -3804,7 +3854,7 @@ _wait_for_commands_to_complete(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 		return;
 
 	/* wait for pending commands to complete */
-	wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 3 * HZ);
+	wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 10 * HZ);
 }
 
 /**
@@ -3822,19 +3872,37 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
 	int r;
 	unsigned long flags;
 
-	dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
+	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
 	    __func__));
 
+	if (ioc->pci_error_recovery) {
+		printk(MPT2SAS_ERR_FMT "%s: pci error recovery reset\n",
+		    ioc->name, __func__);
+		r = 0;
+		goto out;
+	}
+
 	if (mpt2sas_fwfault_debug)
 		mpt2sas_halt_firmware(ioc);
 
-	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
-	if (ioc->shost_recovery) {
-		spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
-		printk(MPT2SAS_ERR_FMT "%s: busy\n",
-		    ioc->name, __func__);
-		return -EBUSY;
+	/* TODO - What we really should be doing is pulling
+	 * out all the code associated with NO_SLEEP; its never used.
+	 * That is legacy code from mpt fusion driver, ported over.
+	 * I will leave this BUG_ON here for now till its been resolved.
+	 */
+	BUG_ON(sleep_flag == NO_SLEEP);
+
+	/* wait for an active reset in progress to complete */
+	if (!mutex_trylock(&ioc->reset_in_progress_mutex)) {
+		do {
+			ssleep(1);
+		} while (ioc->shost_recovery == 1);
+		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name,
+		    __func__));
+		return ioc->ioc_reset_in_progress_status;
 	}
+
+	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
 	ioc->shost_recovery = 1;
 	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 
@@ -3849,13 +3917,17 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
 	if (!r)
 		_base_reset_handler(ioc, MPT2_IOC_DONE_RESET);
  out:
-	dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: %s\n",
+	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: %s\n",
 	    ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED")));
 
 	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+	ioc->ioc_reset_in_progress_status = r;
 	ioc->shost_recovery = 0;
 	complete(&ioc->shost_recovery_done);
 	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+	mutex_unlock(&ioc->reset_in_progress_mutex);
 
+	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name,
+	    __func__));
 	return r;
 }