diff options
Diffstat (limited to 'drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h')
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 94 |
1 files changed, 68 insertions, 26 deletions
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h index 5122920a961a..398fa6fde960 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h @@ -1,13 +1,13 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Copyright 2000-2015 Avago Technologies. All rights reserved. + * Copyright 2000-2020 Broadcom Inc. All rights reserved. * * * Name: mpi2_cnfg.h * Title: MPI Configuration messages and pages * Creation Date: November 10, 2006 * - * mpi2_cnfg.h Version: 02.00.42 + * mpi2_cnfg.h Version: 02.00.46 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -231,6 +231,18 @@ * Added NOIOB field to PCIe Device Page 2. * Added MPI26_PCIEDEV2_CAP_DATA_BLK_ALIGN_AND_GRAN to * the Capabilities field of PCIe Device Page 2. + * 07-22-18 02.00.43 Added defines for SAS3916 and SAS3816. + * Added WRiteCache defines to IO Unit Page 1. + * Added MaxEnclosureLevel to BIOS Page 1. + * Added OEMRD to SAS Enclosure Page 1. + * Added DMDReportPCIe to PCIe IO Unit Page 1. + * Added Flags field and flags for Retimers to + * PCIe Switch Page 1. + * 08-02-18 02.00.44 Added Slotx2, Slotx4 to ManPage 7. + * 08-15-18 02.00.45 Added ProductSpecific field at end of IOC Page 1 + * 08-28-18 02.00.46 Added NVMs Write Cache flag to IOUnitPage1 + * Added DMDReport Delay Time defines to + * PCIeIOUnitPage1 * -------------------------------------------------------------------------- */ @@ -568,8 +580,17 @@ typedef struct _MPI2_CONFIG_REPLY { #define MPI26_MFGPAGE_DEVID_SAS3616 (0x00D1) #define MPI26_MFGPAGE_DEVID_SAS3708 (0x00D2) -#define MPI26_MFGPAGE_DEVID_SAS3816 (0x00A1) -#define MPI26_MFGPAGE_DEVID_SAS3916 (0x00A0) +#define MPI26_MFGPAGE_DEVID_SEC_MASK_3916 (0x0003) +#define MPI26_MFGPAGE_DEVID_INVALID0_3916 (0x00E0) +#define MPI26_MFGPAGE_DEVID_CFG_SEC_3916 (0x00E1) +#define MPI26_MFGPAGE_DEVID_HARD_SEC_3916 (0x00E2) +#define MPI26_MFGPAGE_DEVID_INVALID1_3916 (0x00E3) + +#define MPI26_MFGPAGE_DEVID_SEC_MASK_3816 (0x0003) +#define MPI26_MFGPAGE_DEVID_INVALID0_3816 (0x00E4) +#define MPI26_MFGPAGE_DEVID_CFG_SEC_3816 (0x00E5) +#define MPI26_MFGPAGE_DEVID_HARD_SEC_3816 (0x00E6) +#define MPI26_MFGPAGE_DEVID_INVALID1_3816 (0x00E7) /*Manufacturing Page 0 */ @@ -932,7 +953,11 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 { #define MPI2_IOUNITPAGE1_PAGEVERSION (0x04) -/*IO Unit Page 1 Flags defines */ +/* IO Unit Page 1 Flags defines */ +#define MPI26_IOUNITPAGE1_NVME_WRCACHE_MASK (0x00030000) +#define MPI26_IOUNITPAGE1_NVME_WRCACHE_ENABLE (0x00000000) +#define MPI26_IOUNITPAGE1_NVME_WRCACHE_DISABLE (0x00010000) +#define MPI26_IOUNITPAGE1_NVME_WRCACHE_NO_CHANGE (0x00020000) #define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK (0x00004000) #define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE (0x00002000) #define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH (0x00001000) @@ -1511,7 +1536,7 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 { U32 BiosOptions; /*0x04 */ U32 IOCSettings; /*0x08 */ U8 SSUTimeout; /*0x0C */ - U8 Reserved1; /*0x0D */ + U8 MaxEnclosureLevel; /*0x0D */ U16 Reserved2; /*0x0E */ U32 DeviceSettings; /*0x10 */ U16 NumberOfDevices; /*0x14 */ @@ -1531,7 +1556,6 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 { #define MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG (0x00004000) #define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800) -#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800) #define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL (0x00000000) #define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE (0x00000800) #define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID (0x00001000) @@ -3271,10 +3295,12 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 { U16 NumSlots; /*0x18 */ U16 StartSlot; /*0x1A */ U8 ChassisSlot; /*0x1C */ - U8 EnclosureLeve; /*0x1D */ + U8 EnclosureLevel; /*0x1D */ U16 SEPDevHandle; /*0x1E */ - U32 Reserved3; /*0x20 */ - U32 Reserved4; /*0x24 */ + U8 OEMRD; /*0x20 */ + U8 Reserved1a; /*0x21 */ + U16 Reserved2; /*0x22 */ + U32 Reserved3; /*0x24 */ } MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, *PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t, @@ -3285,6 +3311,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 { #define MPI2_SASENCLOSURE0_PAGEVERSION (0x04) /*values for SAS Enclosure Page 0 Flags field */ +#define MPI26_SAS_ENCLS0_FLAGS_OEMRD_VALID (0x0080) +#define MPI26_SAS_ENCLS0_FLAGS_OEMRD_COLLECTING (0x0040) #define MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020) #define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010) #define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F) @@ -3298,6 +3326,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 { #define MPI26_ENCLOSURE0_PAGEVERSION (0x04) /*Values for Enclosure Page 0 Flags field */ +#define MPI26_ENCLS0_FLAGS_OEMRD_VALID (0x0080) +#define MPI26_ENCLS0_FLAGS_OEMRD_COLLECTING (0x0040) #define MPI26_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020) #define MPI26_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010) #define MPI26_ENCLS0_FLAGS_MNG_MASK (0x000F) @@ -3696,8 +3726,9 @@ typedef struct _MPI26_PCIE_IO_UNIT1_PHY_DATA { Mpi26PCIeIOUnit1PhyData_t, *pMpi26PCIeIOUnit1PhyData_t; /*values for LinkFlags */ -#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS (0x00) -#define MPI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS (0x01) +#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SEPARATE_REFCLK (0x00) +#define MPI26_PCIEIOUNIT1_LINKFLAGS_SRIS_EN (0x01) +#define MPI26_PCIEIOUNIT1_LINKFLAGS_SRNS_EN (0x02) /* *Host code (drivers, BIOS, utilities, etc.) should leave this define set to @@ -3714,7 +3745,7 @@ typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 { U16 AdditionalControlFlags; /*0x0C */ U16 NVMeMaxQueueDepth; /*0x0E */ U8 NumPhys; /*0x10 */ - U8 Reserved1; /*0x11 */ + U8 DMDReportPCIe; /*0x11 */ U16 Reserved2; /*0x12 */ MPI26_PCIE_IO_UNIT1_PHY_DATA PhyData[MPI26_PCIE_IOUNIT1_PHY_MAX];/*0x14 */ @@ -3736,6 +3767,12 @@ typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 { #define MPI26_PCIEIOUNIT1_MAX_RATE_8_0 (0x40) #define MPI26_PCIEIOUNIT1_MAX_RATE_16_0 (0x50) +/*values for PCIe IO Unit Page 1 DMDReportPCIe */ +#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_MASK (0x80) +#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_1_SEC (0x00) +#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_16_SEC (0x80) +#define MPI26_PCIEIOUNIT1_DMDRPT_DELAY_TIME_MASK (0x7F) + /*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo *values */ @@ -3788,6 +3825,9 @@ typedef struct _MPI26_CONFIG_PAGE_PSWITCH_1 { /*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ +/* defines for the Flags field */ +#define MPI26_PCIESWITCH1_2_RETIMER_PRESENCE (0x0002) +#define MPI26_PCIESWITCH1_RETIMER_PRESENCE (0x0001) /**************************************************************************** * PCIe Device Config Pages (MPI v2.6 and later) @@ -3849,19 +3889,21 @@ typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_0 { *field */ -/*values for PCIe Device Page 0 Flags field */ -#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE (0x8000) -#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH (0x4000) -#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE (0x2000) -#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION (0x0400) -#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION (0x0200) -#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE (0x0100) -#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED (0x0080) -#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED (0x0040) -#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED (0x0020) -#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED (0x0010) -#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID (0x0002) -#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT (0x0001) +/*values for PCIe Device Page 0 Flags field*/ +#define MPI26_PCIEDEV0_FLAGS_2_RETIMER_PRESENCE (0x00020000) +#define MPI26_PCIEDEV0_FLAGS_RETIMER_PRESENCE (0x00010000) +#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE (0x00008000) +#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH (0x00004000) +#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE (0x00002000) +#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION (0x00000400) +#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION (0x00000200) +#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE (0x00000100) +#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED (0x00000080) +#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED (0x00000040) +#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED (0x00000020) +#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED (0x00000010) +#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID (0x00000002) +#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT (0x00000001) /* values for PCIe Device Page 0 SupportedLinkRates field */ #define MPI26_PCIEDEV0_LINK_RATE_16_0_SUPPORTED (0x08) |