diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_init.c')
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_init.c | 1315 |
1 files changed, 1019 insertions, 296 deletions
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 7629558eba25..a6d2559217cd 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -2,7 +2,7 @@ * QLOGIC LINUX SOFTWARE * * QLogic ISP2x00 device driver for Linux 2.6.x - * Copyright (C) 2003-2004 QLogic Corporation + * Copyright (C) 2003-2005 QLogic Corporation * (www.qlogic.com) * * This program is free software; you can redistribute it and/or modify it @@ -19,6 +19,8 @@ #include "qla_def.h" #include <linux/delay.h> +#include <linux/vmalloc.h> +#include <linux/firmware.h> #include <scsi/scsi_transport_fc.h> #include "qla_devtbl.h" @@ -34,17 +36,13 @@ /* * QLogic ISP2x00 Hardware Support Function Prototypes. */ -static int qla2x00_pci_config(scsi_qla_host_t *); static int qla2x00_isp_firmware(scsi_qla_host_t *); -static void qla2x00_reset_chip(scsi_qla_host_t *); -static int qla2x00_chip_diag(scsi_qla_host_t *); static void qla2x00_resize_request_q(scsi_qla_host_t *); static int qla2x00_setup_chip(scsi_qla_host_t *); static void qla2x00_init_response_q_entries(scsi_qla_host_t *); static int qla2x00_init_rings(scsi_qla_host_t *); static int qla2x00_fw_ready(scsi_qla_host_t *); static int qla2x00_configure_hba(scsi_qla_host_t *); -static int qla2x00_nvram_config(scsi_qla_host_t *); static int qla2x00_configure_loop(scsi_qla_host_t *); static int qla2x00_configure_local_loop(scsi_qla_host_t *); static void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *); @@ -55,7 +53,6 @@ static int qla2x00_fabric_dev_login(scsi_qla_host_t *, fc_port_t *, uint16_t *); static int qla2x00_restart_isp(scsi_qla_host_t *); -static void qla2x00_reset_adapter(scsi_qla_host_t *); /****************************************************************************/ /* QLogic ISP2x00 Hardware Support Functions. */ @@ -92,17 +89,19 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha) ha->isp_abort_cnt = 0; ha->beacon_blink_led = 0; - rval = qla2x00_pci_config(ha); + qla_printk(KERN_INFO, ha, "Configuring PCI space...\n"); + rval = ha->isp_ops.pci_config(ha); if (rval) { DEBUG2(printk("scsi(%ld): Unable to configure PCI space=n", ha->host_no)); return (rval); } - qla2x00_reset_chip(ha); + ha->isp_ops.reset_chip(ha); qla_printk(KERN_INFO, ha, "Configure NVRAM parameters...\n"); - qla2x00_nvram_config(ha); + + ha->isp_ops.nvram_config(ha); qla_printk(KERN_INFO, ha, "Verifying loaded RISC code...\n"); @@ -115,7 +114,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha) /* If firmware needs to be loaded */ if (qla2x00_isp_firmware(ha) != QLA_SUCCESS) { - if ((rval = qla2x00_chip_diag(ha)) == QLA_SUCCESS) { + if ((rval = ha->isp_ops.chip_diag(ha)) == QLA_SUCCESS) { rval = qla2x00_setup_chip(ha); } } @@ -124,16 +123,19 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha) (rval = qla2x00_init_rings(ha)) == QLA_SUCCESS) { check_fw_ready_again: /* - * Wait for a successful LIP up to a maximum + * Wait for a successful LIP up to a maximum * of (in seconds): RISC login timeout value, * RISC retry count value, and port down retry - * value OR a minimum of 4 seconds OR If no + * value OR a minimum of 4 seconds OR If no * cable, only 5 seconds. */ rval = qla2x00_fw_ready(ha); if (rval == QLA_SUCCESS) { clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags); + /* Issue a marker after FW becomes ready. */ + qla2x00_marker(ha, 0, 0, MK_SYNC_ALL); + /* * Wait at most MAX_TARGET RSCNs for a stable * link. @@ -177,7 +179,6 @@ check_fw_ready_again: if (rval == QLA_SUCCESS) { clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags); - ha->marker_needed = 1; qla2x00_marker(ha, 0, 0, MK_SYNC_ALL); ha->marker_needed = 0; @@ -190,110 +191,190 @@ check_fw_ready_again: } /** - * qla2x00_pci_config() - Setup device PCI configuration registers. + * qla2100_pci_config() - Setup ISP21xx PCI configuration registers. * @ha: HA context * * Returns 0 on success. */ -static int -qla2x00_pci_config(scsi_qla_host_t *ha) +int +qla2100_pci_config(scsi_qla_host_t *ha) { - uint16_t w, mwi; - unsigned long flags = 0; - uint32_t cnt; - - qla_printk(KERN_INFO, ha, "Configuring PCI space...\n"); + uint16_t w, mwi; + unsigned long flags; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; - /* - * Turn on PCI master; for system BIOSes that don't turn it on by - * default. - */ pci_set_master(ha->pdev); mwi = 0; if (pci_set_mwi(ha->pdev)) mwi = PCI_COMMAND_INVALIDATE; pci_read_config_word(ha->pdev, PCI_REVISION_ID, &ha->revision); - if (!ha->iobase) - return (QLA_FUNCTION_FAILED); - - /* - * We want to respect framework's setting of PCI configuration space - * command register and also want to make sure that all bits of - * interest to us are properly set in command register. - */ pci_read_config_word(ha->pdev, PCI_COMMAND, &w); w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR); + pci_write_config_word(ha->pdev, PCI_COMMAND, w); + + /* Reset expansion ROM address decode enable */ + pci_read_config_word(ha->pdev, PCI_ROM_ADDRESS, &w); + w &= ~PCI_ROM_ADDRESS_ENABLE; + pci_write_config_word(ha->pdev, PCI_ROM_ADDRESS, w); /* Get PCI bus information. */ spin_lock_irqsave(&ha->hardware_lock, flags); - ha->pci_attr = RD_REG_WORD(&ha->iobase->ctrl_status); + ha->pci_attr = RD_REG_WORD(®->ctrl_status); spin_unlock_irqrestore(&ha->hardware_lock, flags); - if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) { - pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80); + return QLA_SUCCESS; +} - /* PCI Specification Revision 2.3 changes */ - if (IS_QLA2322(ha) || IS_QLA6322(ha)) - /* Command Register - Reset Interrupt Disable. */ - w &= ~PCI_COMMAND_INTX_DISABLE; +/** + * qla2300_pci_config() - Setup ISP23xx PCI configuration registers. + * @ha: HA context + * + * Returns 0 on success. + */ +int +qla2300_pci_config(scsi_qla_host_t *ha) +{ + uint16_t w, mwi; + unsigned long flags = 0; + uint32_t cnt; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; - /* - * If this is a 2300 card and not 2312, reset the - * COMMAND_INVALIDATE due to a bug in the 2300. Unfortunately, - * the 2310 also reports itself as a 2300 so we need to get the - * fb revision level -- a 6 indicates it really is a 2300 and - * not a 2310. - */ - if (IS_QLA2300(ha)) { - spin_lock_irqsave(&ha->hardware_lock, flags); + pci_set_master(ha->pdev); + mwi = 0; + if (pci_set_mwi(ha->pdev)) + mwi = PCI_COMMAND_INVALIDATE; + pci_read_config_word(ha->pdev, PCI_REVISION_ID, &ha->revision); - /* Pause RISC. */ - WRT_REG_WORD(&ha->iobase->hccr, HCCR_PAUSE_RISC); - for (cnt = 0; cnt < 30000; cnt++) { - if ((RD_REG_WORD(&ha->iobase->hccr) & - HCCR_RISC_PAUSE) != 0) - break; - - udelay(10); - } + pci_read_config_word(ha->pdev, PCI_COMMAND, &w); + w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR); - /* Select FPM registers. */ - WRT_REG_WORD(&ha->iobase->ctrl_status, 0x20); - RD_REG_WORD(&ha->iobase->ctrl_status); + if (IS_QLA2322(ha) || IS_QLA6322(ha)) + w &= ~PCI_COMMAND_INTX_DISABLE; - /* Get the fb rev level */ - ha->fb_rev = RD_FB_CMD_REG(ha, ha->iobase); + /* + * If this is a 2300 card and not 2312, reset the + * COMMAND_INVALIDATE due to a bug in the 2300. Unfortunately, + * the 2310 also reports itself as a 2300 so we need to get the + * fb revision level -- a 6 indicates it really is a 2300 and + * not a 2310. + */ + if (IS_QLA2300(ha)) { + spin_lock_irqsave(&ha->hardware_lock, flags); - if (ha->fb_rev == FPM_2300) - w &= ~PCI_COMMAND_INVALIDATE; + /* Pause RISC. */ + WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); + for (cnt = 0; cnt < 30000; cnt++) { + if ((RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) != 0) + break; - /* Deselect FPM registers. */ - WRT_REG_WORD(&ha->iobase->ctrl_status, 0x0); - RD_REG_WORD(&ha->iobase->ctrl_status); + udelay(10); + } - /* Release RISC module. */ - WRT_REG_WORD(&ha->iobase->hccr, HCCR_RELEASE_RISC); - for (cnt = 0; cnt < 30000; cnt++) { - if ((RD_REG_WORD(&ha->iobase->hccr) & - HCCR_RISC_PAUSE) == 0) - break; - - udelay(10); - } + /* Select FPM registers. */ + WRT_REG_WORD(®->ctrl_status, 0x20); + RD_REG_WORD(®->ctrl_status); - spin_unlock_irqrestore(&ha->hardware_lock, flags); + /* Get the fb rev level */ + ha->fb_rev = RD_FB_CMD_REG(ha, reg); + + if (ha->fb_rev == FPM_2300) + w &= ~PCI_COMMAND_INVALIDATE; + + /* Deselect FPM registers. */ + WRT_REG_WORD(®->ctrl_status, 0x0); + RD_REG_WORD(®->ctrl_status); + + /* Release RISC module. */ + WRT_REG_WORD(®->hccr, HCCR_RELEASE_RISC); + for (cnt = 0; cnt < 30000; cnt++) { + if ((RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) == 0) + break; + + udelay(10); } + + spin_unlock_irqrestore(&ha->hardware_lock, flags); } + pci_write_config_word(ha->pdev, PCI_COMMAND, w); + + pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80); + /* Reset expansion ROM address decode enable */ + pci_read_config_word(ha->pdev, PCI_ROM_ADDRESS, &w); + w &= ~PCI_ROM_ADDRESS_ENABLE; + pci_write_config_word(ha->pdev, PCI_ROM_ADDRESS, w); + + /* Get PCI bus information. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + ha->pci_attr = RD_REG_WORD(®->ctrl_status); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + return QLA_SUCCESS; +} + +/** + * qla24xx_pci_config() - Setup ISP24xx PCI configuration registers. + * @ha: HA context + * + * Returns 0 on success. + */ +int +qla24xx_pci_config(scsi_qla_host_t *ha) +{ + uint16_t w, mwi; + unsigned long flags = 0; + struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + int pcix_cmd_reg, pcie_dctl_reg; + + pci_set_master(ha->pdev); + mwi = 0; + if (pci_set_mwi(ha->pdev)) + mwi = PCI_COMMAND_INVALIDATE; + pci_read_config_word(ha->pdev, PCI_REVISION_ID, &ha->revision); + + pci_read_config_word(ha->pdev, PCI_COMMAND, &w); + w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR); + w &= ~PCI_COMMAND_INTX_DISABLE; pci_write_config_word(ha->pdev, PCI_COMMAND, w); + pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80); + + /* PCI-X -- adjust Maximum Memory Read Byte Count (2048). */ + pcix_cmd_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_PCIX); + if (pcix_cmd_reg) { + uint16_t pcix_cmd; + + pcix_cmd_reg += PCI_X_CMD; + pci_read_config_word(ha->pdev, pcix_cmd_reg, &pcix_cmd); + pcix_cmd &= ~PCI_X_CMD_MAX_READ; + pcix_cmd |= 0x0008; + pci_write_config_word(ha->pdev, pcix_cmd_reg, pcix_cmd); + } + + /* PCIe -- adjust Maximum Read Request Size (2048). */ + pcie_dctl_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP); + if (pcie_dctl_reg) { + uint16_t pcie_dctl; + + pcie_dctl_reg += PCI_EXP_DEVCTL; + pci_read_config_word(ha->pdev, pcie_dctl_reg, &pcie_dctl); + pcie_dctl &= ~PCI_EXP_DEVCTL_READRQ; + pcie_dctl |= 0x4000; + pci_write_config_word(ha->pdev, pcie_dctl_reg, pcie_dctl); + } + /* Reset expansion ROM address decode enable */ pci_read_config_word(ha->pdev, PCI_ROM_ADDRESS, &w); w &= ~PCI_ROM_ADDRESS_ENABLE; pci_write_config_word(ha->pdev, PCI_ROM_ADDRESS, w); - return (QLA_SUCCESS); + /* Get PCI bus information. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + ha->pci_attr = RD_REG_DWORD(®->ctrl_status); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + return QLA_SUCCESS; } /** @@ -308,7 +389,7 @@ qla2x00_isp_firmware(scsi_qla_host_t *ha) int rval; /* Assume loading risc code */ - rval = QLA_FUNCTION_FAILED; + rval = QLA_FUNCTION_FAILED; if (ha->flags.disable_risc_code_load) { DEBUG2(printk("scsi(%ld): RISC CODE NOT loaded\n", @@ -316,7 +397,9 @@ qla2x00_isp_firmware(scsi_qla_host_t *ha) qla_printk(KERN_INFO, ha, "RISC CODE NOT loaded\n"); /* Verify checksum of loaded RISC code. */ - rval = qla2x00_verify_checksum(ha); + rval = qla2x00_verify_checksum(ha, + IS_QLA24XX(ha) || IS_QLA25XX(ha) ? RISC_SADDRESS : + *ha->brd_info->fw_info[0].fwstart); } if (rval) { @@ -333,17 +416,16 @@ qla2x00_isp_firmware(scsi_qla_host_t *ha) * * Returns 0 on success. */ -static void -qla2x00_reset_chip(scsi_qla_host_t *ha) +void +qla2x00_reset_chip(scsi_qla_host_t *ha) { unsigned long flags = 0; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; uint32_t cnt; unsigned long mbx_flags = 0; uint16_t cmd; - /* Disable ISP interrupts. */ - qla2x00_disable_intrs(ha); + ha->isp_ops.disable_intrs(ha); spin_lock_irqsave(&ha->hardware_lock, flags); @@ -482,16 +564,95 @@ qla2x00_reset_chip(scsi_qla_host_t *ha) } /** + * qla24xx_reset_risc() - Perform full reset of ISP24xx RISC. + * @ha: HA context + * + * Returns 0 on success. + */ +static inline void +qla24xx_reset_risc(scsi_qla_host_t *ha) +{ + unsigned long flags = 0; + struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + uint32_t cnt, d2; + + spin_lock_irqsave(&ha->hardware_lock, flags); + + /* Reset RISC. */ + WRT_REG_DWORD(®->ctrl_status, CSRX_DMA_SHUTDOWN|MWB_4096_BYTES); + for (cnt = 0; cnt < 30000; cnt++) { + if ((RD_REG_DWORD(®->ctrl_status) & CSRX_DMA_ACTIVE) == 0) + break; + + udelay(10); + } + + WRT_REG_DWORD(®->ctrl_status, + CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES); + RD_REG_DWORD(®->ctrl_status); + + /* Wait for firmware to complete NVRAM accesses. */ + udelay(5); + d2 = (uint32_t) RD_REG_WORD(®->mailbox0); + for (cnt = 10000 ; cnt && d2; cnt--) { + udelay(5); + d2 = (uint32_t) RD_REG_WORD(®->mailbox0); + barrier(); + } + + udelay(20); + d2 = RD_REG_DWORD(®->ctrl_status); + for (cnt = 6000000 ; cnt && (d2 & CSRX_ISP_SOFT_RESET); cnt--) { + udelay(5); + d2 = RD_REG_DWORD(®->ctrl_status); + barrier(); + } + + WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_RESET); + RD_REG_DWORD(®->hccr); + + WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE); + RD_REG_DWORD(®->hccr); + + WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_RESET); + RD_REG_DWORD(®->hccr); + + d2 = (uint32_t) RD_REG_WORD(®->mailbox0); + for (cnt = 6000000 ; cnt && d2; cnt--) { + udelay(5); + d2 = (uint32_t) RD_REG_WORD(®->mailbox0); + barrier(); + } + + spin_unlock_irqrestore(&ha->hardware_lock, flags); +} + +/** + * qla24xx_reset_chip() - Reset ISP24xx chip. + * @ha: HA context + * + * Returns 0 on success. + */ +void +qla24xx_reset_chip(scsi_qla_host_t *ha) +{ + ha->isp_ops.disable_intrs(ha); + + /* Perform RISC reset. */ + qla24xx_reset_risc(ha); +} + +/** * qla2x00_chip_diag() - Test chip for proper operation. * @ha: HA context * * Returns 0 on success. */ -static int +int qla2x00_chip_diag(scsi_qla_host_t *ha) { int rval; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; unsigned long flags = 0; uint16_t data; uint32_t cnt; @@ -536,7 +697,7 @@ qla2x00_chip_diag(scsi_qla_host_t *ha) for (cnt = 6000000; cnt && (data == MBS_BUSY); cnt--) { udelay(5); data = RD_MAILBOX_REG(ha, reg, 0); - barrier(); + barrier(); } } else udelay(10); @@ -607,6 +768,51 @@ chip_diag_failed: } /** + * qla24xx_chip_diag() - Test ISP24xx for proper operation. + * @ha: HA context + * + * Returns 0 on success. + */ +int +qla24xx_chip_diag(scsi_qla_host_t *ha) +{ + int rval; + + /* Perform RISC reset. */ + qla24xx_reset_risc(ha); + + ha->fw_transfer_size = REQUEST_ENTRY_SIZE * 1024; + + rval = qla2x00_mbx_reg_test(ha); + if (rval) { + DEBUG(printk("scsi(%ld): Failed mailbox send register test\n", + ha->host_no)); + qla_printk(KERN_WARNING, ha, + "Failed mailbox send register test\n"); + } else { + /* Flag a successful rval */ + rval = QLA_SUCCESS; + } + + return rval; +} + +static void +qla2x00_alloc_fw_dump(scsi_qla_host_t *ha) +{ + ha->fw_dumped = 0; + ha->fw_dump24_len = sizeof(struct qla24xx_fw_dump); + ha->fw_dump24_len += (ha->fw_memory_size - 0x100000) * sizeof(uint32_t); + ha->fw_dump24 = vmalloc(ha->fw_dump24_len); + if (ha->fw_dump24) + qla_printk(KERN_INFO, ha, "Allocated (%d KB) for firmware " + "dump...\n", ha->fw_dump24_len / 1024); + else + qla_printk(KERN_WARNING, ha, "Unable to allocate (%d KB) for " + "firmware dump!!!\n", ha->fw_dump24_len / 1024); +} + +/** * qla2x00_resize_request_q() - Resize request queue given available ISP memory. * @ha: HA context * @@ -625,6 +831,9 @@ qla2x00_resize_request_q(scsi_qla_host_t *ha) if (IS_QLA2100(ha) || IS_QLA2200(ha)) return; + if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) + qla2x00_alloc_fw_dump(ha); + /* Retrieve IOCB counts available to the firmware. */ rval = qla2x00_get_resource_cnts(ha, NULL, NULL, NULL, &fw_iocb_cnt); if (rval) @@ -668,87 +877,22 @@ qla2x00_resize_request_q(scsi_qla_host_t *ha) static int qla2x00_setup_chip(scsi_qla_host_t *ha) { - int rval; - uint16_t cnt; - uint16_t *risc_code; - unsigned long risc_address; - unsigned long risc_code_size; - int num; - int i; - uint16_t *req_ring; - struct qla_fw_info *fw_iter; - - rval = QLA_SUCCESS; + int rval; + uint32_t srisc_address = 0; /* Load firmware sequences */ - fw_iter = ha->brd_info->fw_info; - while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) { - risc_code = fw_iter->fwcode; - risc_code_size = *fw_iter->fwlen; - - if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) { - risc_address = *fw_iter->fwstart; - } else { - /* Extended address */ - risc_address = *fw_iter->lfwstart; - } - - num = 0; - rval = 0; - while (risc_code_size > 0 && !rval) { - cnt = (uint16_t)(ha->fw_transfer_size >> 1); - if (cnt > risc_code_size) - cnt = risc_code_size; - - DEBUG7(printk("scsi(%ld): Loading risc segment@ " - "addr %p, number of bytes 0x%x, offset 0x%lx.\n", - ha->host_no, risc_code, cnt, risc_address)); - - req_ring = (uint16_t *)ha->request_ring; - for (i = 0; i < cnt; i++) - req_ring[i] = cpu_to_le16(risc_code[i]); - - if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) { - rval = qla2x00_load_ram(ha, - ha->request_dma, risc_address, cnt); - } else { - rval = qla2x00_load_ram_ext(ha, - ha->request_dma, risc_address, cnt); - } - if (rval) { - DEBUG(printk("scsi(%ld): [ERROR] Failed to " - "load segment %d of firmware\n", - ha->host_no, num)); - qla_printk(KERN_WARNING, ha, - "[ERROR] Failed to load " - "segment %d of firmware\n", num); - - qla2x00_dump_regs(ha); - break; - } - - risc_code += cnt; - risc_address += cnt; - risc_code_size -= cnt; - num++; - } - - /* Next firmware sequence */ - fw_iter++; - } - - /* Verify checksum of loaded RISC code. */ - if (!rval) { + rval = ha->isp_ops.load_risc(ha, &srisc_address); + if (rval == QLA_SUCCESS) { DEBUG(printk("scsi(%ld): Verifying Checksum of loaded RISC " "code.\n", ha->host_no)); - rval = qla2x00_verify_checksum(ha); + rval = qla2x00_verify_checksum(ha, srisc_address); if (rval == QLA_SUCCESS) { /* Start firmware execution. */ DEBUG(printk("scsi(%ld): Checksum OK, start " "firmware.\n", ha->host_no)); - rval = qla2x00_execute_fw(ha); + rval = qla2x00_execute_fw(ha, srisc_address); /* Retrieve firmware information. */ if (rval == QLA_SUCCESS && ha->fw_major_version == 0) { qla2x00_get_fw_version(ha, @@ -802,7 +946,7 @@ qla2x00_init_response_q_entries(scsi_qla_host_t *ha) * * Returns 0 on success. */ -static void +void qla2x00_update_fw_options(scsi_qla_host_t *ha) { uint16_t swing, emphasis, tx_sens, rx_sens; @@ -828,7 +972,7 @@ qla2x00_update_fw_options(scsi_qla_host_t *ha) emphasis = (ha->fw_seriallink_options[2] & (BIT_4 | BIT_3)) >> 3; tx_sens = ha->fw_seriallink_options[0] & - (BIT_3 | BIT_2 | BIT_1 | BIT_0); + (BIT_3 | BIT_2 | BIT_1 | BIT_0); rx_sens = (ha->fw_seriallink_options[0] & (BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4; ha->fw_options[10] = (emphasis << 14) | (swing << 8); @@ -846,7 +990,7 @@ qla2x00_update_fw_options(scsi_qla_host_t *ha) (BIT_7 | BIT_6 | BIT_5)) >> 5; emphasis = ha->fw_seriallink_options[3] & (BIT_1 | BIT_0); tx_sens = ha->fw_seriallink_options[1] & - (BIT_3 | BIT_2 | BIT_1 | BIT_0); + (BIT_3 | BIT_2 | BIT_1 | BIT_0); rx_sens = (ha->fw_seriallink_options[1] & (BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4; ha->fw_options[11] = (emphasis << 14) | (swing << 8); @@ -872,6 +1016,69 @@ qla2x00_update_fw_options(scsi_qla_host_t *ha) qla2x00_set_fw_options(ha, ha->fw_options); } +void +qla24xx_update_fw_options(scsi_qla_host_t *ha) +{ + int rval; + + /* Update Serial Link options. */ + if ((ha->fw_seriallink_options24[0] & BIT_0) == 0) + return; + + rval = qla2x00_set_serdes_params(ha, ha->fw_seriallink_options24[1], + ha->fw_seriallink_options24[2], ha->fw_seriallink_options24[3]); + if (rval != QLA_SUCCESS) { + qla_printk(KERN_WARNING, ha, + "Unable to update Serial Link options (%x).\n", rval); + } +} + +void +qla2x00_config_rings(struct scsi_qla_host *ha) +{ + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + /* Setup ring parameters in initialization control block. */ + ha->init_cb->request_q_outpointer = __constant_cpu_to_le16(0); + ha->init_cb->response_q_inpointer = __constant_cpu_to_le16(0); + ha->init_cb->request_q_length = cpu_to_le16(ha->request_q_length); + ha->init_cb->response_q_length = cpu_to_le16(ha->response_q_length); + ha->init_cb->request_q_address[0] = cpu_to_le32(LSD(ha->request_dma)); + ha->init_cb->request_q_address[1] = cpu_to_le32(MSD(ha->request_dma)); + ha->init_cb->response_q_address[0] = cpu_to_le32(LSD(ha->response_dma)); + ha->init_cb->response_q_address[1] = cpu_to_le32(MSD(ha->response_dma)); + + WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), 0); + WRT_REG_WORD(ISP_REQ_Q_OUT(ha, reg), 0); + WRT_REG_WORD(ISP_RSP_Q_IN(ha, reg), 0); + WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), 0); + RD_REG_WORD(ISP_RSP_Q_OUT(ha, reg)); /* PCI Posting. */ +} + +void +qla24xx_config_rings(struct scsi_qla_host *ha) +{ + struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + struct init_cb_24xx *icb; + + /* Setup ring parameters in initialization control block. */ + icb = (struct init_cb_24xx *)ha->init_cb; + icb->request_q_outpointer = __constant_cpu_to_le16(0); + icb->response_q_inpointer = __constant_cpu_to_le16(0); + icb->request_q_length = cpu_to_le16(ha->request_q_length); + icb->response_q_length = cpu_to_le16(ha->response_q_length); + icb->request_q_address[0] = cpu_to_le32(LSD(ha->request_dma)); + icb->request_q_address[1] = cpu_to_le32(MSD(ha->request_dma)); + icb->response_q_address[0] = cpu_to_le32(LSD(ha->response_dma)); + icb->response_q_address[1] = cpu_to_le32(MSD(ha->response_dma)); + + WRT_REG_DWORD(®->req_q_in, 0); + WRT_REG_DWORD(®->req_q_out, 0); + WRT_REG_DWORD(®->rsp_q_in, 0); + WRT_REG_DWORD(®->rsp_q_out, 0); + RD_REG_DWORD(®->rsp_q_out); +} + /** * qla2x00_init_rings() - Initializes firmware. * @ha: HA context @@ -887,7 +1094,6 @@ qla2x00_init_rings(scsi_qla_host_t *ha) int rval; unsigned long flags = 0; int cnt; - device_reg_t __iomem *reg = ha->iobase; spin_lock_irqsave(&ha->hardware_lock, flags); @@ -908,32 +1114,18 @@ qla2x00_init_rings(scsi_qla_host_t *ha) ha->response_ring_ptr = ha->response_ring; ha->rsp_ring_index = 0; - /* Setup ring parameters in initialization control block. */ - ha->init_cb->request_q_outpointer = __constant_cpu_to_le16(0); - ha->init_cb->response_q_inpointer = __constant_cpu_to_le16(0); - ha->init_cb->request_q_length = cpu_to_le16(ha->request_q_length); - ha->init_cb->response_q_length = cpu_to_le16(ha->response_q_length); - ha->init_cb->request_q_address[0] = cpu_to_le32(LSD(ha->request_dma)); - ha->init_cb->request_q_address[1] = cpu_to_le32(MSD(ha->request_dma)); - ha->init_cb->response_q_address[0] = cpu_to_le32(LSD(ha->response_dma)); - ha->init_cb->response_q_address[1] = cpu_to_le32(MSD(ha->response_dma)); - /* Initialize response queue entries */ qla2x00_init_response_q_entries(ha); - WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), 0); - WRT_REG_WORD(ISP_REQ_Q_OUT(ha, reg), 0); - WRT_REG_WORD(ISP_RSP_Q_IN(ha, reg), 0); - WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), 0); - RD_REG_WORD(ISP_RSP_Q_OUT(ha, reg)); /* PCI Posting. */ + ha->isp_ops.config_rings(ha); spin_unlock_irqrestore(&ha->hardware_lock, flags); /* Update any ISP specific firmware options before initialization. */ - qla2x00_update_fw_options(ha); + ha->isp_ops.update_fw_options(ha); DEBUG(printk("scsi(%ld): Issue init firmware.\n", ha->host_no)); - rval = qla2x00_init_firmware(ha, sizeof(init_cb_t)); + rval = qla2x00_init_firmware(ha, ha->init_cb_size); if (rval) { DEBUG2_3(printk("scsi(%ld): Init firmware **** FAILED ****.\n", ha->host_no)); @@ -963,7 +1155,7 @@ qla2x00_fw_ready(scsi_qla_host_t *ha) rval = QLA_SUCCESS; /* 20 seconds for loop down. */ - min_wait = 20; + min_wait = 20; /* * Firmware should take at most one RATOV to login, plus 5 seconds for @@ -1009,8 +1201,8 @@ qla2x00_fw_ready(scsi_qla_host_t *ha) (fw_state >= FSTATE_LOSS_OF_SYNC || fw_state == FSTATE_WAIT_AL_PA)) { /* Loop down. Timeout on min_wait for states - * other than Wait for Login. - */ + * other than Wait for Login. + */ if (time_after_eq(jiffies, mtime)) { qla_printk(KERN_INFO, ha, "Cable is unplugged...\n"); @@ -1165,41 +1357,36 @@ qla2x00_configure_hba(scsi_qla_host_t *ha) * Returns: * 0 = success. */ -static int +int qla2x00_nvram_config(scsi_qla_host_t *ha) { - int rval; - uint8_t chksum = 0; - uint16_t cnt; - uint8_t *dptr1, *dptr2; - init_cb_t *icb = ha->init_cb; - nvram_t *nv = (nvram_t *)ha->request_ring; - uint16_t *wptr = (uint16_t *)ha->request_ring; - device_reg_t __iomem *reg = ha->iobase; - uint8_t timer_mode; + int rval; + uint8_t chksum = 0; + uint16_t cnt; + uint8_t *dptr1, *dptr2; + init_cb_t *icb = ha->init_cb; + nvram_t *nv = (nvram_t *)ha->request_ring; + uint8_t *ptr = (uint8_t *)ha->request_ring; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + uint8_t timer_mode; rval = QLA_SUCCESS; /* Determine NVRAM starting address. */ + ha->nvram_size = sizeof(nvram_t); ha->nvram_base = 0; if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) if ((RD_REG_WORD(®->ctrl_status) >> 14) == 1) ha->nvram_base = 0x80; /* Get NVRAM data and calculate checksum. */ - qla2x00_lock_nvram_access(ha); - for (cnt = 0; cnt < sizeof(nvram_t)/2; cnt++) { - *wptr = cpu_to_le16(qla2x00_get_nvram_word(ha, - (cnt+ha->nvram_base))); - chksum += (uint8_t)*wptr; - chksum += (uint8_t)(*wptr >> 8); - wptr++; - } - qla2x00_unlock_nvram_access(ha); + ha->isp_ops.read_nvram(ha, ptr, ha->nvram_base, ha->nvram_size); + for (cnt = 0, chksum = 0; cnt < ha->nvram_size; cnt++) + chksum += *ptr++; DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no)); DEBUG5(qla2x00_dump_buffer((uint8_t *)ha->request_ring, - sizeof(nvram_t))); + ha->nvram_size)); /* Bad NVRAM data, set defaults parameters. */ if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || @@ -1214,7 +1401,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) /* * Set default initialization control block. */ - memset(nv, 0, sizeof(nvram_t)); + memset(nv, 0, ha->nvram_size); nv->parameter_block_version = ICB_VERSION; if (IS_QLA23XX(ha)) { @@ -1274,7 +1461,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) #endif /* Reset Initialization control block */ - memset(icb, 0, sizeof(init_cb_t)); + memset(icb, 0, ha->init_cb_size); /* * Setup driver NVRAM options. @@ -1287,6 +1474,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) if (IS_QLA23XX(ha)) { nv->firmware_options[0] |= BIT_2; nv->firmware_options[0] &= ~BIT_3; + nv->add_firmware_options[1] |= BIT_5 | BIT_4; if (IS_QLA2300(ha)) { if (ha->fb_rev == FPM_2310) { @@ -1368,8 +1556,6 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) /* * Set host adapter parameters. */ - ha->nvram_version = nv->nvram_version; - ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0); /* Always load RISC code on non ISP2[12]00 chips. */ if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) @@ -1389,7 +1575,8 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) ha->serial0 = icb->port_name[5]; ha->serial1 = icb->port_name[6]; ha->serial2 = icb->port_name[7]; - memcpy(ha->node_name, icb->node_name, WWN_SIZE); + ha->node_name = icb->node_name; + ha->port_name = icb->port_name; icb->execution_throttle = __constant_cpu_to_le16(0xFFFF); @@ -1417,7 +1604,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) * * The driver waits for the link to come up after link down * before returning I/Os to OS with "DID_NO_CONNECT". - */ + */ if (nv->link_down_timeout == 0) { ha->loop_down_abort_time = (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT); @@ -1425,7 +1612,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) ha->link_down_timeout = nv->link_down_timeout; ha->loop_down_abort_time = (LOOP_DOWN_TIME - ha->link_down_timeout); - } + } /* * Need enough time to try and get the port back. @@ -1527,7 +1714,7 @@ qla2x00_alloc_fcport(scsi_qla_host_t *ha, int flags) * 2 = database was full and device was not configured. */ static int -qla2x00_configure_loop(scsi_qla_host_t *ha) +qla2x00_configure_loop(scsi_qla_host_t *ha) { int rval; unsigned long flags, save_flags; @@ -1635,7 +1822,7 @@ qla2x00_configure_loop(scsi_qla_host_t *ha) * 0 = success. */ static int -qla2x00_configure_local_loop(scsi_qla_host_t *ha) +qla2x00_configure_local_loop(scsi_qla_host_t *ha) { int rval, rval2; int found_devs; @@ -1698,15 +1885,13 @@ qla2x00_configure_local_loop(scsi_qla_host_t *ha) domain = ((struct gid_list_info *)id_iter)->domain; area = ((struct gid_list_info *)id_iter)->area; al_pa = ((struct gid_list_info *)id_iter)->al_pa; - if (IS_QLA2100(ha) || IS_QLA2200(ha)) { + if (IS_QLA2100(ha) || IS_QLA2200(ha)) loop_id = (uint16_t) ((struct gid_list_info *)id_iter)->loop_id_2100; - id_iter += 4; - } else { + else loop_id = le16_to_cpu( ((struct gid_list_info *)id_iter)->loop_id); - id_iter += 6; - } + id_iter += ha->gid_list_info_size; /* Bypass reserved domain fields. */ if ((domain & 0xf0) == 0xf0) @@ -1792,16 +1977,16 @@ cleanup_allocation: } static void -qla2x00_probe_for_all_luns(scsi_qla_host_t *ha) +qla2x00_probe_for_all_luns(scsi_qla_host_t *ha) { fc_port_t *fcport; - qla2x00_mark_all_devices_lost(ha); + qla2x00_mark_all_devices_lost(ha); list_for_each_entry(fcport, &ha->fcports, list) { if (fcport->port_type != FCT_TARGET) continue; - qla2x00_update_fcport(ha, fcport); + qla2x00_update_fcport(ha, fcport); } } @@ -1883,20 +2068,24 @@ qla2x00_reg_remote_port(scsi_qla_host_t *ha, fc_port_t *fcport) rport_ids.port_id = fcport->d_id.b.domain << 16 | fcport->d_id.b.area << 8 | fcport->d_id.b.al_pa; rport_ids.roles = FC_RPORT_ROLE_UNKNOWN; + fcport->rport = rport = fc_remote_port_add(ha->host, 0, &rport_ids); + if (!rport) { + qla_printk(KERN_WARNING, ha, + "Unable to allocate fc remote port!\n"); + return; + } + rport->dd_data = fcport; + + rport_ids.roles = FC_RPORT_ROLE_UNKNOWN; if (fcport->port_type == FCT_INITIATOR) rport_ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR; if (fcport->port_type == FCT_TARGET) rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET; + fc_remote_port_rolechg(rport, rport_ids.roles); - fcport->rport = rport = fc_remote_port_add(ha->host, 0, &rport_ids); - if (!rport) - qla_printk(KERN_WARNING, ha, - "Unable to allocate fc remote port!\n"); - - if (rport->scsi_target_id != -1 && rport->scsi_target_id < MAX_TARGETS) + if (rport->scsi_target_id != -1 && + rport->scsi_target_id < ha->host->max_id) fcport->os_target_id = rport->scsi_target_id; - - rport->dd_data = fcport; } /* @@ -1917,10 +2106,15 @@ qla2x00_configure_fabric(scsi_qla_host_t *ha) fc_port_t *fcport, *fcptemp; uint16_t next_loopid; uint16_t mb[MAILBOX_REGISTER_COUNT]; + uint16_t loop_id; LIST_HEAD(new_fcports); /* If FL port exists, then SNS is present */ - rval = qla2x00_get_port_name(ha, SNS_FL_PORT, NULL, 0); + if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) + loop_id = NPH_F_PORT; + else + loop_id = SNS_FL_PORT; + rval = qla2x00_get_port_name(ha, loop_id, NULL, 0); if (rval != QLA_SUCCESS) { DEBUG2(printk("scsi(%ld): MBC_GET_PORT_NAME Failed, No FL " "Port\n", ha->host_no)); @@ -1937,12 +2131,16 @@ qla2x00_configure_fabric(scsi_qla_host_t *ha) } do { /* Ensure we are logged into the SNS. */ - qla2x00_login_fabric(ha, SIMPLE_NAME_SERVER, 0xff, 0xff, 0xfc, - mb, BIT_1 | BIT_0); + if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) + loop_id = NPH_SNS; + else + loop_id = SIMPLE_NAME_SERVER; + ha->isp_ops.fabric_login(ha, loop_id, 0xff, 0xff, + 0xfc, mb, BIT_1 | BIT_0); if (mb[0] != MBS_COMMAND_COMPLETE) { DEBUG2(qla_printk(KERN_INFO, ha, "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x " - "mb[2]=%x mb[6]=%x mb[7]=%x\n", SIMPLE_NAME_SERVER, + "mb[2]=%x mb[6]=%x mb[7]=%x\n", loop_id, mb[0], mb[1], mb[2], mb[6], mb[7])); return (QLA_SUCCESS); } @@ -1992,8 +2190,11 @@ qla2x00_configure_fabric(scsi_qla_host_t *ha) fcport->port_type != FCT_INITIATOR && fcport->port_type != FCT_BROADCAST) { - qla2x00_fabric_logout(ha, - fcport->loop_id); + ha->isp_ops.fabric_logout(ha, + fcport->loop_id, + fcport->d_id.b.domain, + fcport->d_id.b.area, + fcport->d_id.b.al_pa); fcport->loop_id = FC_NO_LOOP_ID; } } @@ -2023,7 +2224,6 @@ qla2x00_configure_fabric(scsi_qla_host_t *ha) break; } } - /* Login and update database */ qla2x00_fabric_dev_login(ha, fcport, &next_loopid); } @@ -2137,9 +2337,8 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports) /* Starting free loop ID. */ loop_id = ha->min_external_loopid; - for (; loop_id <= ha->last_loop_id; loop_id++) { - if (RESERVED_LOOP_ID(loop_id)) + if (qla2x00_is_reserved_id(ha, loop_id)) continue; if (atomic_read(&ha->loop_down_timer) || @@ -2238,7 +2437,9 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports) (fcport->flags & FCF_TAPE_PRESENT) == 0 && fcport->port_type != FCT_INITIATOR && fcport->port_type != FCT_BROADCAST) { - qla2x00_fabric_logout(ha, fcport->loop_id); + ha->isp_ops.fabric_logout(ha, fcport->loop_id, + fcport->d_id.b.domain, fcport->d_id.b.area, + fcport->d_id.b.al_pa); fcport->loop_id = FC_NO_LOOP_ID; } @@ -2309,7 +2510,7 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *ha, fc_port_t *dev) } /* Skip reserved loop IDs. */ - while (RESERVED_LOOP_ID(dev->loop_id)) { + while (qla2x00_is_reserved_id(ha, dev->loop_id)) { dev->loop_id++; } @@ -2360,7 +2561,7 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *ha, fc_port_t *dev) * Kernel context. */ static int -qla2x00_device_resync(scsi_qla_host_t *ha) +qla2x00_device_resync(scsi_qla_host_t *ha) { int rval; int rval2; @@ -2421,6 +2622,7 @@ qla2x00_device_resync(scsi_qla_host_t *ha) case 0: if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA6312(ha) && !IS_QLA6322(ha) && + !IS_QLA24XX(ha) && !IS_QLA25XX(ha) && ha->flags.init_done) { /* Handle port RSCN via asyncronous IOCBs */ rval2 = qla2x00_handle_port_rscn(ha, rscn_entry, @@ -2489,15 +2691,24 @@ qla2x00_fabric_dev_login(scsi_qla_host_t *ha, fc_port_t *fcport, { int rval; int retry; + uint8_t opts; rval = QLA_SUCCESS; retry = 0; rval = qla2x00_fabric_login(ha, fcport, next_loopid); if (rval == QLA_SUCCESS) { - rval = qla2x00_get_port_database(ha, fcport, 0); + /* Send an ADISC to tape devices.*/ + opts = 0; + if (fcport->flags & FCF_TAPE_PRESENT) + opts |= BIT_1; + rval = qla2x00_get_port_database(ha, fcport, opts); if (rval != QLA_SUCCESS) { - qla2x00_fabric_logout(ha, fcport->loop_id); + ha->isp_ops.fabric_logout(ha, fcport->loop_id, + fcport->d_id.b.domain, fcport->d_id.b.area, + fcport->d_id.b.al_pa); + qla2x00_mark_device_lost(ha, fcport, 1); + } else { qla2x00_update_fcport(ha, fcport); } @@ -2539,16 +2750,16 @@ qla2x00_fabric_login(scsi_qla_host_t *ha, fc_port_t *fcport, fcport->d_id.b.area, fcport->d_id.b.al_pa)); /* Login fcport on switch. */ - qla2x00_login_fabric(ha, fcport->loop_id, + ha->isp_ops.fabric_login(ha, fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa, mb, BIT_0); if (mb[0] == MBS_PORT_ID_USED) { /* * Device has another loop ID. The firmware team - * recommends us to perform an implicit login with the - * specified ID again. The ID we just used is save here - * so we return with an ID that can be tried by the - * next login. + * recommends the driver perform an implicit login with + * the specified ID again. The ID we just used is save + * here so we return with an ID that can be tried by + * the next login. */ retry++; tmp_loopid = fcport->loop_id; @@ -2602,7 +2813,9 @@ qla2x00_fabric_login(scsi_qla_host_t *ha, fc_port_t *fcport, * dead. */ *next_loopid = fcport->loop_id; - qla2x00_fabric_logout(ha, fcport->loop_id); + ha->isp_ops.fabric_logout(ha, fcport->loop_id, + fcport->d_id.b.domain, fcport->d_id.b.area, + fcport->d_id.b.al_pa); qla2x00_mark_device_lost(ha, fcport, 1); rval = 1; @@ -2612,13 +2825,15 @@ qla2x00_fabric_login(scsi_qla_host_t *ha, fc_port_t *fcport, * unrecoverable / not handled error */ DEBUG2(printk("%s(%ld): failed=%x port_id=%02x%02x%02x " - "loop_id=%x jiffies=%lx.\n", - __func__, ha->host_no, mb[0], + "loop_id=%x jiffies=%lx.\n", + __func__, ha->host_no, mb[0], fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa, fcport->loop_id, jiffies)); *next_loopid = fcport->loop_id; - qla2x00_fabric_logout(ha, fcport->loop_id); + ha->isp_ops.fabric_logout(ha, fcport->loop_id, + fcport->d_id.b.domain, fcport->d_id.b.area, + fcport->d_id.b.al_pa); fcport->loop_id = FC_NO_LOOP_ID; atomic_set(&fcport->state, FCS_DEVICE_DEAD); @@ -2674,7 +2889,7 @@ qla2x00_local_device_login(scsi_qla_host_t *ha, uint16_t loop_id) * 0 = success */ int -qla2x00_loop_resync(scsi_qla_host_t *ha) +qla2x00_loop_resync(scsi_qla_host_t *ha) { int rval; uint32_t wait_time; @@ -2688,14 +2903,11 @@ qla2x00_loop_resync(scsi_qla_host_t *ha) /* Wait at most MAX_TARGET RSCNs for a stable link. */ wait_time = 256; do { - /* v2.19.05b6 */ atomic_set(&ha->loop_state, LOOP_UPDATE); - /* - * Issue marker command only when we are going - * to start the I/O . - */ - ha->marker_needed = 1; + /* Issue a marker after FW becomes ready. */ + qla2x00_marker(ha, 0, 0, MK_SYNC_ALL); + ha->marker_needed = 0; /* Remap devices on Loop. */ clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags); @@ -2736,7 +2948,7 @@ qla2x00_rescan_fcports(scsi_qla_host_t *ha) rescan_done = 1; } - qla2x00_probe_for_all_luns(ha); + qla2x00_probe_for_all_luns(ha); } /* @@ -2763,7 +2975,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) qla_printk(KERN_INFO, ha, "Performing ISP error recovery - ha= %p.\n", ha); - qla2x00_reset_chip(ha); + ha->isp_ops.reset_chip(ha); atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME); if (atomic_read(&ha->loop_state) != LOOP_DOWN) { @@ -2789,7 +3001,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) } spin_unlock_irqrestore(&ha->hardware_lock, flags); - qla2x00_nvram_config(ha); + ha->isp_ops.nvram_config(ha); if (!qla2x00_restart_isp(ha)) { clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags); @@ -2804,10 +3016,9 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) ha->flags.online = 1; - /* Enable ISP interrupts. */ - qla2x00_enable_intrs(ha); + ha->isp_ops.enable_intrs(ha); - ha->isp_abort_cnt = 0; + ha->isp_abort_cnt = 0; clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags); } else { /* failed the ISP abort */ ha->flags.online = 1; @@ -2816,11 +3027,11 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) qla_printk(KERN_WARNING, ha, "ISP error recovery failed - " "board disabled\n"); - /* + /* * The next call disables the board * completely. */ - qla2x00_reset_adapter(ha); + ha->isp_ops.reset_adapter(ha); ha->flags.online = 0; clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags); @@ -2828,7 +3039,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) } else { /* schedule another ISP abort */ ha->isp_abort_cnt--; DEBUG(printk("qla%ld: ISP abort - " - "retry remainning %d\n", + "retry remaining %d\n", ha->host_no, ha->isp_abort_cnt);) status = 1; } @@ -2841,7 +3052,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) status = 1; } } - + } if (status) { @@ -2870,43 +3081,52 @@ static int qla2x00_restart_isp(scsi_qla_host_t *ha) { uint8_t status = 0; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; unsigned long flags = 0; uint32_t wait_time; /* If firmware needs to be loaded */ if (qla2x00_isp_firmware(ha)) { ha->flags.online = 0; - if (!(status = qla2x00_chip_diag(ha))) { + if (!(status = ha->isp_ops.chip_diag(ha))) { if (IS_QLA2100(ha) || IS_QLA2200(ha)) { status = qla2x00_setup_chip(ha); goto done; } - reg = ha->iobase; - spin_lock_irqsave(&ha->hardware_lock, flags); - /* Disable SRAM, Instruction RAM and GP RAM parity. */ - WRT_REG_WORD(®->hccr, (HCCR_ENABLE_PARITY + 0x0)); - RD_REG_WORD(®->hccr); /* PCI Posting. */ + if (!IS_QLA24XX(ha) && !IS_QLA25XX(ha)) { + /* + * Disable SRAM, Instruction RAM and GP RAM + * parity. + */ + WRT_REG_WORD(®->hccr, + (HCCR_ENABLE_PARITY + 0x0)); + RD_REG_WORD(®->hccr); + } spin_unlock_irqrestore(&ha->hardware_lock, flags); - + status = qla2x00_setup_chip(ha); spin_lock_irqsave(&ha->hardware_lock, flags); - - /* Enable proper parity */ - if (IS_QLA2300(ha)) - /* SRAM parity */ - WRT_REG_WORD(®->hccr, - (HCCR_ENABLE_PARITY + 0x1)); - else - /* SRAM, Instruction RAM and GP RAM parity */ - WRT_REG_WORD(®->hccr, - (HCCR_ENABLE_PARITY + 0x7)); - RD_REG_WORD(®->hccr); /* PCI Posting. */ + + if (!IS_QLA24XX(ha) && !IS_QLA25XX(ha)) { + /* Enable proper parity */ + if (IS_QLA2300(ha)) + /* SRAM parity */ + WRT_REG_WORD(®->hccr, + (HCCR_ENABLE_PARITY + 0x1)); + else + /* + * SRAM, Instruction RAM and GP RAM + * parity. + */ + WRT_REG_WORD(®->hccr, + (HCCR_ENABLE_PARITY + 0x7)); + RD_REG_WORD(®->hccr); + } spin_unlock_irqrestore(&ha->hardware_lock, flags); } @@ -2917,9 +3137,11 @@ qla2x00_restart_isp(scsi_qla_host_t *ha) clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags); if (!(status = qla2x00_fw_ready(ha))) { DEBUG(printk("%s(): Start configure loop, " - "status = %d\n", - __func__, - status);) + "status = %d\n", __func__, status);) + + /* Issue a marker after FW becomes ready. */ + qla2x00_marker(ha, 0, 0, MK_SYNC_ALL); + ha->flags.online = 1; /* Wait at most MAX_TARGET RSCNs for a stable link. */ wait_time = 256; @@ -2934,7 +3156,7 @@ qla2x00_restart_isp(scsi_qla_host_t *ha) } /* if no cable then assume it's good */ - if ((ha->device_flags & DFLG_NO_CABLE)) + if ((ha->device_flags & DFLG_NO_CABLE)) status = 0; DEBUG(printk("%s(): Configure loop done, status = 0x%x\n", @@ -2951,16 +3173,15 @@ qla2x00_restart_isp(scsi_qla_host_t *ha) * Input: * ha = adapter block pointer. */ -static void +void qla2x00_reset_adapter(scsi_qla_host_t *ha) { unsigned long flags = 0; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; ha->flags.online = 0; - qla2x00_disable_intrs(ha); + ha->isp_ops.disable_intrs(ha); - /* Reset RISC processor. */ spin_lock_irqsave(&ha->hardware_lock, flags); WRT_REG_WORD(®->hccr, HCCR_RESET_RISC); RD_REG_WORD(®->hccr); /* PCI Posting. */ @@ -2968,3 +3189,505 @@ qla2x00_reset_adapter(scsi_qla_host_t *ha) RD_REG_WORD(®->hccr); /* PCI Posting. */ spin_unlock_irqrestore(&ha->hardware_lock, flags); } + +void +qla24xx_reset_adapter(scsi_qla_host_t *ha) +{ + unsigned long flags = 0; + struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + + ha->flags.online = 0; + ha->isp_ops.disable_intrs(ha); + + spin_lock_irqsave(&ha->hardware_lock, flags); + WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_RESET); + RD_REG_DWORD(®->hccr); + WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE); + RD_REG_DWORD(®->hccr); + spin_unlock_irqrestore(&ha->hardware_lock, flags); +} + +int +qla24xx_nvram_config(scsi_qla_host_t *ha) +{ + int rval; + struct init_cb_24xx *icb; + struct nvram_24xx *nv; + uint32_t *dptr; + uint8_t *dptr1, *dptr2; + uint32_t chksum; + uint16_t cnt; + + rval = QLA_SUCCESS; + icb = (struct init_cb_24xx *)ha->init_cb; + nv = (struct nvram_24xx *)ha->request_ring; + + /* Determine NVRAM starting address. */ + ha->nvram_size = sizeof(struct nvram_24xx); + ha->nvram_base = FA_NVRAM_FUNC0_ADDR; + if (PCI_FUNC(ha->pdev->devfn)) + ha->nvram_base = FA_NVRAM_FUNC1_ADDR; + + /* Get NVRAM data and calculate checksum. */ + dptr = (uint32_t *)nv; + ha->isp_ops.read_nvram(ha, (uint8_t *)dptr, ha->nvram_base, + ha->nvram_size); + for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++) + chksum += le32_to_cpu(*dptr++); + + DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no)); + DEBUG5(qla2x00_dump_buffer((uint8_t *)ha->request_ring, + ha->nvram_size)); + + /* Bad NVRAM data, set defaults parameters. */ + if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P' + || nv->id[3] != ' ' || + nv->nvram_version < __constant_cpu_to_le16(ICB_VERSION)) { + /* Reset NVRAM data. */ + qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: " + "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0], + le16_to_cpu(nv->nvram_version)); + qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet " + "invalid -- WWPN) defaults.\n"); + + /* + * Set default initialization control block. + */ + memset(nv, 0, ha->nvram_size); + nv->nvram_version = __constant_cpu_to_le16(ICB_VERSION); + nv->version = __constant_cpu_to_le16(ICB_VERSION); + nv->frame_payload_size = __constant_cpu_to_le16(2048); + nv->execution_throttle = __constant_cpu_to_le16(0xFFFF); + nv->exchange_count = __constant_cpu_to_le16(0); + nv->hard_address = __constant_cpu_to_le16(124); + nv->port_name[0] = 0x21; + nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn); + nv->port_name[2] = 0x00; + nv->port_name[3] = 0xe0; + nv->port_name[4] = 0x8b; + nv->port_name[5] = 0x1c; + nv->port_name[6] = 0x55; + nv->port_name[7] = 0x86; + nv->node_name[0] = 0x20; + nv->node_name[1] = 0x00; + nv->node_name[2] = 0x00; + nv->node_name[3] = 0xe0; + nv->node_name[4] = 0x8b; + nv->node_name[5] = 0x1c; + nv->node_name[6] = 0x55; + nv->node_name[7] = 0x86; + nv->login_retry_count = __constant_cpu_to_le16(8); + nv->link_down_timeout = __constant_cpu_to_le16(200); + nv->interrupt_delay_timer = __constant_cpu_to_le16(0); + nv->login_timeout = __constant_cpu_to_le16(0); + nv->firmware_options_1 = + __constant_cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1); + nv->firmware_options_2 = __constant_cpu_to_le32(2 << 4); + nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12); + nv->firmware_options_3 = __constant_cpu_to_le32(2 << 13); + nv->host_p = __constant_cpu_to_le32(BIT_11|BIT_10); + nv->efi_parameters = __constant_cpu_to_le32(0); + nv->reset_delay = 5; + nv->max_luns_per_target = __constant_cpu_to_le16(128); + nv->port_down_retry_count = __constant_cpu_to_le16(30); + nv->link_down_timeout = __constant_cpu_to_le16(30); + + rval = 1; + } + + /* Reset Initialization control block */ + memset(icb, 0, sizeof(struct init_cb_24xx)); + + /* Copy 1st segment. */ + dptr1 = (uint8_t *)icb; + dptr2 = (uint8_t *)&nv->version; + cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version; + while (cnt--) + *dptr1++ = *dptr2++; + + icb->login_retry_count = nv->login_retry_count; + icb->link_down_timeout = nv->link_down_timeout; + + /* Copy 2nd segment. */ + dptr1 = (uint8_t *)&icb->interrupt_delay_timer; + dptr2 = (uint8_t *)&nv->interrupt_delay_timer; + cnt = (uint8_t *)&icb->reserved_3 - + (uint8_t *)&icb->interrupt_delay_timer; + while (cnt--) + *dptr1++ = *dptr2++; + + /* + * Setup driver NVRAM options. + */ + if (memcmp(nv->model_name, BINZERO, sizeof(nv->model_name)) != 0) { + char *st, *en; + uint16_t index; + + strncpy(ha->model_number, nv->model_name, + sizeof(nv->model_name)); + st = en = ha->model_number; + en += sizeof(nv->model_name) - 1; + while (en > st) { + if (*en != 0x20 && *en != 0x00) + break; + *en-- = '\0'; + } + + index = (ha->pdev->subsystem_device & 0xff); + if (index < QLA_MODEL_NAMES) + ha->model_desc = qla2x00_model_desc[index]; + } else + strcpy(ha->model_number, "QLA2462"); + + /* Prepare nodename */ + if ((icb->firmware_options_1 & BIT_14) == 0) { + /* + * Firmware will apply the following mask if the nodename was + * not provided. + */ + memcpy(icb->node_name, icb->port_name, WWN_SIZE); + icb->node_name[0] &= 0xF0; + } + + /* Set host adapter parameters. */ + ha->flags.disable_risc_code_load = 0; + ha->flags.enable_lip_reset = 1; + ha->flags.enable_lip_full_login = 1; + ha->flags.enable_target_reset = 1; + ha->flags.enable_led_scheme = 0; + + ha->operating_mode = + (icb->firmware_options_2 & (BIT_6 | BIT_5 | BIT_4)) >> 4; + + memcpy(ha->fw_seriallink_options24, nv->seriallink_options, + sizeof(ha->fw_seriallink_options24)); + + /* save HBA serial number */ + ha->serial0 = icb->port_name[5]; + ha->serial1 = icb->port_name[6]; + ha->serial2 = icb->port_name[7]; + ha->node_name = icb->node_name; + ha->port_name = icb->port_name; + + ha->retry_count = le16_to_cpu(nv->login_retry_count); + + /* Set minimum login_timeout to 4 seconds. */ + if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout) + nv->login_timeout = cpu_to_le16(ql2xlogintimeout); + if (le16_to_cpu(nv->login_timeout) < 4) + nv->login_timeout = __constant_cpu_to_le16(4); + ha->login_timeout = le16_to_cpu(nv->login_timeout); + icb->login_timeout = cpu_to_le16(nv->login_timeout); + + /* Set minimum RATOV to 200 tenths of a second. */ + ha->r_a_tov = 200; + + ha->loop_reset_delay = nv->reset_delay; + + /* Link Down Timeout = 0: + * + * When Port Down timer expires we will start returning + * I/O's to OS with "DID_NO_CONNECT". + * + * Link Down Timeout != 0: + * + * The driver waits for the link to come up after link down + * before returning I/Os to OS with "DID_NO_CONNECT". + */ + if (le16_to_cpu(nv->link_down_timeout) == 0) { + ha->loop_down_abort_time = + (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT); + } else { + ha->link_down_timeout = le16_to_cpu(nv->link_down_timeout); + ha->loop_down_abort_time = + (LOOP_DOWN_TIME - ha->link_down_timeout); + } + + /* Need enough time to try and get the port back. */ + ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count); + if (qlport_down_retry) + ha->port_down_retry_count = qlport_down_retry; + + /* Set login_retry_count */ + ha->login_retry_count = le16_to_cpu(nv->login_retry_count); + if (ha->port_down_retry_count == + le16_to_cpu(nv->port_down_retry_count) && + ha->port_down_retry_count > 3) + ha->login_retry_count = ha->port_down_retry_count; + else if (ha->port_down_retry_count > (int)ha->login_retry_count) + ha->login_retry_count = ha->port_down_retry_count; + if (ql2xloginretrycount) + ha->login_retry_count = ql2xloginretrycount; + + if (rval) { + DEBUG2_3(printk(KERN_WARNING + "scsi(%ld): NVRAM configuration failed!\n", ha->host_no)); + } + return (rval); +} + +int +qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr) +{ + int rval; + uint16_t cnt; + uint16_t *risc_code; + unsigned long risc_address; + unsigned long risc_code_size; + int num; + int i; + uint16_t *req_ring; + struct qla_fw_info *fw_iter; + + rval = QLA_SUCCESS; + + /* Load firmware sequences */ + fw_iter = ha->brd_info->fw_info; + *srisc_addr = *ha->brd_info->fw_info->fwstart; + while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) { + risc_code = fw_iter->fwcode; + risc_code_size = *fw_iter->fwlen; + + if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) { + risc_address = *fw_iter->fwstart; + } else { + /* Extended address */ + risc_address = *fw_iter->lfwstart; + } + + num = 0; + rval = 0; + while (risc_code_size > 0 && !rval) { + cnt = (uint16_t)(ha->fw_transfer_size >> 1); + if (cnt > risc_code_size) + cnt = risc_code_size; + + DEBUG7(printk("scsi(%ld): Loading risc segment@ " + "addr %p, number of bytes 0x%x, offset 0x%lx.\n", + ha->host_no, risc_code, cnt, risc_address)); + + req_ring = (uint16_t *)ha->request_ring; + for (i = 0; i < cnt; i++) + req_ring[i] = cpu_to_le16(risc_code[i]); + + if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) { + rval = qla2x00_load_ram(ha, ha->request_dma, + risc_address, cnt); + } else { + rval = qla2x00_load_ram_ext(ha, + ha->request_dma, risc_address, cnt); + } + if (rval) { + DEBUG(printk("scsi(%ld): [ERROR] Failed to " + "load segment %d of firmware\n", + ha->host_no, num)); + qla_printk(KERN_WARNING, ha, + "[ERROR] Failed to load segment %d of " + "firmware\n", num); + + qla2x00_dump_regs(ha); + break; + } + + risc_code += cnt; + risc_address += cnt; + risc_code_size -= cnt; + num++; + } + + /* Next firmware sequence */ + fw_iter++; + } + + return (rval); +} + +int +qla24xx_load_risc_flash(scsi_qla_host_t *ha, uint32_t *srisc_addr) +{ + int rval; + int segments, fragment; + uint32_t faddr; + uint32_t *dcode, dlen; + uint32_t risc_addr; + uint32_t risc_size; + uint32_t i; + + rval = QLA_SUCCESS; + + segments = FA_RISC_CODE_SEGMENTS; + faddr = FA_RISC_CODE_ADDR; + dcode = (uint32_t *)ha->request_ring; + *srisc_addr = 0; + + /* Validate firmware image by checking version. */ + qla24xx_read_flash_data(ha, dcode, faddr + 4, 4); + for (i = 0; i < 4; i++) + dcode[i] = be32_to_cpu(dcode[i]); + if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff && + dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) || + (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 && + dcode[3] == 0)) { + qla_printk(KERN_WARNING, ha, + "Unable to verify integrity of flash firmware image!\n"); + qla_printk(KERN_WARNING, ha, + "Firmware data: %08x %08x %08x %08x!\n", dcode[0], + dcode[1], dcode[2], dcode[3]); + + return QLA_FUNCTION_FAILED; + } + + while (segments && rval == QLA_SUCCESS) { + /* Read segment's load information. */ + qla24xx_read_flash_data(ha, dcode, faddr, 4); + + risc_addr = be32_to_cpu(dcode[2]); + *srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr; + risc_size = be32_to_cpu(dcode[3]); + + fragment = 0; + while (risc_size > 0 && rval == QLA_SUCCESS) { + dlen = (uint32_t)(ha->fw_transfer_size >> 2); + if (dlen > risc_size) + dlen = risc_size; + + DEBUG7(printk("scsi(%ld): Loading risc segment@ risc " + "addr %x, number of dwords 0x%x, offset 0x%x.\n", + ha->host_no, risc_addr, dlen, faddr)); + + qla24xx_read_flash_data(ha, dcode, faddr, dlen); + for (i = 0; i < dlen; i++) + dcode[i] = swab32(dcode[i]); + + rval = qla2x00_load_ram_ext(ha, ha->request_dma, + risc_addr, dlen); + if (rval) { + DEBUG(printk("scsi(%ld):[ERROR] Failed to load " + "segment %d of firmware\n", ha->host_no, + fragment)); + qla_printk(KERN_WARNING, ha, + "[ERROR] Failed to load segment %d of " + "firmware\n", fragment); + break; + } + + faddr += dlen; + risc_addr += dlen; + risc_size -= dlen; + fragment++; + } + + /* Next segment. */ + segments--; + } + + return rval; +} + +int +qla24xx_load_risc_hotplug(scsi_qla_host_t *ha, uint32_t *srisc_addr) +{ + int rval; + int segments, fragment; + uint32_t *dcode, dlen; + uint32_t risc_addr; + uint32_t risc_size; + uint32_t i; + const struct firmware *fw_entry; + uint32_t *fwcode, fwclen; + + if (request_firmware(&fw_entry, ha->brd_info->fw_fname, + &ha->pdev->dev)) { + qla_printk(KERN_ERR, ha, + "Firmware image file not available: '%s'\n", + ha->brd_info->fw_fname); + return QLA_FUNCTION_FAILED; + } + + rval = QLA_SUCCESS; + + segments = FA_RISC_CODE_SEGMENTS; + dcode = (uint32_t *)ha->request_ring; + *srisc_addr = 0; + fwcode = (uint32_t *)fw_entry->data; + fwclen = 0; + + /* Validate firmware image by checking version. */ + if (fw_entry->size < 8 * sizeof(uint32_t)) { + qla_printk(KERN_WARNING, ha, + "Unable to verify integrity of flash firmware image " + "(%Zd)!\n", fw_entry->size); + goto fail_fw_integrity; + } + for (i = 0; i < 4; i++) + dcode[i] = be32_to_cpu(fwcode[i + 4]); + if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff && + dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) || + (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 && + dcode[3] == 0)) { + qla_printk(KERN_WARNING, ha, + "Unable to verify integrity of flash firmware image!\n"); + qla_printk(KERN_WARNING, ha, + "Firmware data: %08x %08x %08x %08x!\n", dcode[0], + dcode[1], dcode[2], dcode[3]); + goto fail_fw_integrity; + } + + while (segments && rval == QLA_SUCCESS) { + risc_addr = be32_to_cpu(fwcode[2]); + *srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr; + risc_size = be32_to_cpu(fwcode[3]); + + /* Validate firmware image size. */ + fwclen += risc_size * sizeof(uint32_t); + if (fw_entry->size < fwclen) { + qla_printk(KERN_WARNING, ha, + "Unable to verify integrity of flash firmware " + "image (%Zd)!\n", fw_entry->size); + goto fail_fw_integrity; + } + + fragment = 0; + while (risc_size > 0 && rval == QLA_SUCCESS) { + dlen = (uint32_t)(ha->fw_transfer_size >> 2); + if (dlen > risc_size) + dlen = risc_size; + + DEBUG7(printk("scsi(%ld): Loading risc segment@ risc " + "addr %x, number of dwords 0x%x.\n", ha->host_no, + risc_addr, dlen)); + + for (i = 0; i < dlen; i++) + dcode[i] = swab32(fwcode[i]); + + rval = qla2x00_load_ram_ext(ha, ha->request_dma, + risc_addr, dlen); + if (rval) { + DEBUG(printk("scsi(%ld):[ERROR] Failed to load " + "segment %d of firmware\n", ha->host_no, + fragment)); + qla_printk(KERN_WARNING, ha, + "[ERROR] Failed to load segment %d of " + "firmware\n", fragment); + break; + } + + fwcode += dlen; + risc_addr += dlen; + risc_size -= dlen; + fragment++; + } + + /* Next segment. */ + segments--; + } + + release_firmware(fw_entry); + return rval; + +fail_fw_integrity: + + release_firmware(fw_entry); + return QLA_FUNCTION_FAILED; + +} |