diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_sup.c')
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_sup.c | 963 |
1 files changed, 963 insertions, 0 deletions
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index f4d755a643e4..3866a5760f15 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -695,3 +695,966 @@ qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr, return ret; } + + +static inline void +qla2x00_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags) +{ + if (IS_QLA2322(ha)) { + /* Flip all colors. */ + if (ha->beacon_color_state == QLA_LED_ALL_ON) { + /* Turn off. */ + ha->beacon_color_state = 0; + *pflags = GPIO_LED_ALL_OFF; + } else { + /* Turn on. */ + ha->beacon_color_state = QLA_LED_ALL_ON; + *pflags = GPIO_LED_RGA_ON; + } + } else { + /* Flip green led only. */ + if (ha->beacon_color_state == QLA_LED_GRN_ON) { + /* Turn off. */ + ha->beacon_color_state = 0; + *pflags = GPIO_LED_GREEN_OFF_AMBER_OFF; + } else { + /* Turn on. */ + ha->beacon_color_state = QLA_LED_GRN_ON; + *pflags = GPIO_LED_GREEN_ON_AMBER_OFF; + } + } +} + +void +qla2x00_beacon_blink(struct scsi_qla_host *ha) +{ + uint16_t gpio_enable; + uint16_t gpio_data; + uint16_t led_color = 0; + unsigned long flags; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + if (ha->pio_address) + reg = (struct device_reg_2xxx __iomem *)ha->pio_address; + + spin_lock_irqsave(&ha->hardware_lock, flags); + + /* Save the Original GPIOE. */ + if (ha->pio_address) { + gpio_enable = RD_REG_WORD_PIO(®->gpioe); + gpio_data = RD_REG_WORD_PIO(®->gpiod); + } else { + gpio_enable = RD_REG_WORD(®->gpioe); + gpio_data = RD_REG_WORD(®->gpiod); + } + + /* Set the modified gpio_enable values */ + gpio_enable |= GPIO_LED_MASK; + + if (ha->pio_address) { + WRT_REG_WORD_PIO(®->gpioe, gpio_enable); + } else { + WRT_REG_WORD(®->gpioe, gpio_enable); + RD_REG_WORD(®->gpioe); + } + + qla2x00_flip_colors(ha, &led_color); + + /* Clear out any previously set LED color. */ + gpio_data &= ~GPIO_LED_MASK; + + /* Set the new input LED color to GPIOD. */ + gpio_data |= led_color; + + /* Set the modified gpio_data values */ + if (ha->pio_address) { + WRT_REG_WORD_PIO(®->gpiod, gpio_data); + } else { + WRT_REG_WORD(®->gpiod, gpio_data); + RD_REG_WORD(®->gpiod); + } + + spin_unlock_irqrestore(&ha->hardware_lock, flags); +} + +int +qla2x00_beacon_on(struct scsi_qla_host *ha) +{ + uint16_t gpio_enable; + uint16_t gpio_data; + unsigned long flags; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING; + ha->fw_options[1] |= FO1_DISABLE_GPIO6_7; + + if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) { + qla_printk(KERN_WARNING, ha, + "Unable to update fw options (beacon on).\n"); + return QLA_FUNCTION_FAILED; + } + + if (ha->pio_address) + reg = (struct device_reg_2xxx __iomem *)ha->pio_address; + + /* Turn off LEDs. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + if (ha->pio_address) { + gpio_enable = RD_REG_WORD_PIO(®->gpioe); + gpio_data = RD_REG_WORD_PIO(®->gpiod); + } else { + gpio_enable = RD_REG_WORD(®->gpioe); + gpio_data = RD_REG_WORD(®->gpiod); + } + gpio_enable |= GPIO_LED_MASK; + + /* Set the modified gpio_enable values. */ + if (ha->pio_address) { + WRT_REG_WORD_PIO(®->gpioe, gpio_enable); + } else { + WRT_REG_WORD(®->gpioe, gpio_enable); + RD_REG_WORD(®->gpioe); + } + + /* Clear out previously set LED colour. */ + gpio_data &= ~GPIO_LED_MASK; + if (ha->pio_address) { + WRT_REG_WORD_PIO(®->gpiod, gpio_data); + } else { + WRT_REG_WORD(®->gpiod, gpio_data); + RD_REG_WORD(®->gpiod); + } + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + /* + * Let the per HBA timer kick off the blinking process based on + * the following flags. No need to do anything else now. + */ + ha->beacon_blink_led = 1; + ha->beacon_color_state = 0; + + return QLA_SUCCESS; +} + +int +qla2x00_beacon_off(struct scsi_qla_host *ha) +{ + int rval = QLA_SUCCESS; + + ha->beacon_blink_led = 0; + + /* Set the on flag so when it gets flipped it will be off. */ + if (IS_QLA2322(ha)) + ha->beacon_color_state = QLA_LED_ALL_ON; + else + ha->beacon_color_state = QLA_LED_GRN_ON; + + ha->isp_ops.beacon_blink(ha); /* This turns green LED off */ + + ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING; + ha->fw_options[1] &= ~FO1_DISABLE_GPIO6_7; + + rval = qla2x00_set_fw_options(ha, ha->fw_options); + if (rval != QLA_SUCCESS) + qla_printk(KERN_WARNING, ha, + "Unable to update fw options (beacon off).\n"); + return rval; +} + + +static inline void +qla24xx_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags) +{ + /* Flip all colors. */ + if (ha->beacon_color_state == QLA_LED_ALL_ON) { + /* Turn off. */ + ha->beacon_color_state = 0; + *pflags = 0; + } else { + /* Turn on. */ + ha->beacon_color_state = QLA_LED_ALL_ON; + *pflags = GPDX_LED_YELLOW_ON | GPDX_LED_AMBER_ON; + } +} + +void +qla24xx_beacon_blink(struct scsi_qla_host *ha) +{ + uint16_t led_color = 0; + uint32_t gpio_data; + unsigned long flags; + struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + + /* Save the Original GPIOD. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + gpio_data = RD_REG_DWORD(®->gpiod); + + /* Enable the gpio_data reg for update. */ + gpio_data |= GPDX_LED_UPDATE_MASK; + + WRT_REG_DWORD(®->gpiod, gpio_data); + gpio_data = RD_REG_DWORD(®->gpiod); + + /* Set the color bits. */ + qla24xx_flip_colors(ha, &led_color); + + /* Clear out any previously set LED color. */ + gpio_data &= ~GPDX_LED_COLOR_MASK; + + /* Set the new input LED color to GPIOD. */ + gpio_data |= led_color; + + /* Set the modified gpio_data values. */ + WRT_REG_DWORD(®->gpiod, gpio_data); + gpio_data = RD_REG_DWORD(®->gpiod); + spin_unlock_irqrestore(&ha->hardware_lock, flags); +} + +int +qla24xx_beacon_on(struct scsi_qla_host *ha) +{ + uint32_t gpio_data; + unsigned long flags; + struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + + if (ha->beacon_blink_led == 0) { + /* Enable firmware for update */ + ha->fw_options[1] |= ADD_FO1_DISABLE_GPIO_LED_CTRL; + + if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) + return QLA_FUNCTION_FAILED; + + if (qla2x00_get_fw_options(ha, ha->fw_options) != + QLA_SUCCESS) { + qla_printk(KERN_WARNING, ha, + "Unable to update fw options (beacon on).\n"); + return QLA_FUNCTION_FAILED; + } + + spin_lock_irqsave(&ha->hardware_lock, flags); + gpio_data = RD_REG_DWORD(®->gpiod); + + /* Enable the gpio_data reg for update. */ + gpio_data |= GPDX_LED_UPDATE_MASK; + WRT_REG_DWORD(®->gpiod, gpio_data); + RD_REG_DWORD(®->gpiod); + + spin_unlock_irqrestore(&ha->hardware_lock, flags); + } + + /* So all colors blink together. */ + ha->beacon_color_state = 0; + + /* Let the per HBA timer kick off the blinking process. */ + ha->beacon_blink_led = 1; + + return QLA_SUCCESS; +} + +int +qla24xx_beacon_off(struct scsi_qla_host *ha) +{ + uint32_t gpio_data; + unsigned long flags; + struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + + ha->beacon_blink_led = 0; + ha->beacon_color_state = QLA_LED_ALL_ON; + + ha->isp_ops.beacon_blink(ha); /* Will flip to all off. */ + + /* Give control back to firmware. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + gpio_data = RD_REG_DWORD(®->gpiod); + + /* Disable the gpio_data reg for update. */ + gpio_data &= ~GPDX_LED_UPDATE_MASK; + WRT_REG_DWORD(®->gpiod, gpio_data); + RD_REG_DWORD(®->gpiod); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + ha->fw_options[1] &= ~ADD_FO1_DISABLE_GPIO_LED_CTRL; + + if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) { + qla_printk(KERN_WARNING, ha, + "Unable to update fw options (beacon off).\n"); + return QLA_FUNCTION_FAILED; + } + + if (qla2x00_get_fw_options(ha, ha->fw_options) != QLA_SUCCESS) { + qla_printk(KERN_WARNING, ha, + "Unable to get fw options (beacon off).\n"); + return QLA_FUNCTION_FAILED; + } + + return QLA_SUCCESS; +} + + +/* + * Flash support routines + */ + +/** + * qla2x00_flash_enable() - Setup flash for reading and writing. + * @ha: HA context + */ +static void +qla2x00_flash_enable(scsi_qla_host_t *ha) +{ + uint16_t data; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + data = RD_REG_WORD(®->ctrl_status); + data |= CSR_FLASH_ENABLE; + WRT_REG_WORD(®->ctrl_status, data); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ +} + +/** + * qla2x00_flash_disable() - Disable flash and allow RISC to run. + * @ha: HA context + */ +static void +qla2x00_flash_disable(scsi_qla_host_t *ha) +{ + uint16_t data; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + data = RD_REG_WORD(®->ctrl_status); + data &= ~(CSR_FLASH_ENABLE); + WRT_REG_WORD(®->ctrl_status, data); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ +} + +/** + * qla2x00_read_flash_byte() - Reads a byte from flash + * @ha: HA context + * @addr: Address in flash to read + * + * A word is read from the chip, but, only the lower byte is valid. + * + * Returns the byte read from flash @addr. + */ +static uint8_t +qla2x00_read_flash_byte(scsi_qla_host_t *ha, uint32_t addr) +{ + uint16_t data; + uint16_t bank_select; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + bank_select = RD_REG_WORD(®->ctrl_status); + + if (IS_QLA2322(ha) || IS_QLA6322(ha)) { + /* Specify 64K address range: */ + /* clear out Module Select and Flash Address bits [19:16]. */ + bank_select &= ~0xf8; + bank_select |= addr >> 12 & 0xf0; + bank_select |= CSR_FLASH_64K_BANK; + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + + WRT_REG_WORD(®->flash_address, (uint16_t)addr); + data = RD_REG_WORD(®->flash_data); + + return (uint8_t)data; + } + + /* Setup bit 16 of flash address. */ + if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) { + bank_select |= CSR_FLASH_64K_BANK; + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + } else if (((addr & BIT_16) == 0) && + (bank_select & CSR_FLASH_64K_BANK)) { + bank_select &= ~(CSR_FLASH_64K_BANK); + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + } + + /* Always perform IO mapped accesses to the FLASH registers. */ + if (ha->pio_address) { + uint16_t data2; + + reg = (struct device_reg_2xxx __iomem *)ha->pio_address; + WRT_REG_WORD_PIO(®->flash_address, (uint16_t)addr); + do { + data = RD_REG_WORD_PIO(®->flash_data); + barrier(); + cpu_relax(); + data2 = RD_REG_WORD_PIO(®->flash_data); + } while (data != data2); + } else { + WRT_REG_WORD(®->flash_address, (uint16_t)addr); + data = qla2x00_debounce_register(®->flash_data); + } + + return (uint8_t)data; +} + +/** + * qla2x00_write_flash_byte() - Write a byte to flash + * @ha: HA context + * @addr: Address in flash to write + * @data: Data to write + */ +static void +qla2x00_write_flash_byte(scsi_qla_host_t *ha, uint32_t addr, uint8_t data) +{ + uint16_t bank_select; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + bank_select = RD_REG_WORD(®->ctrl_status); + if (IS_QLA2322(ha) || IS_QLA6322(ha)) { + /* Specify 64K address range: */ + /* clear out Module Select and Flash Address bits [19:16]. */ + bank_select &= ~0xf8; + bank_select |= addr >> 12 & 0xf0; + bank_select |= CSR_FLASH_64K_BANK; + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + + WRT_REG_WORD(®->flash_address, (uint16_t)addr); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + WRT_REG_WORD(®->flash_data, (uint16_t)data); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + + return; + } + + /* Setup bit 16 of flash address. */ + if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) { + bank_select |= CSR_FLASH_64K_BANK; + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + } else if (((addr & BIT_16) == 0) && + (bank_select & CSR_FLASH_64K_BANK)) { + bank_select &= ~(CSR_FLASH_64K_BANK); + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + } + + /* Always perform IO mapped accesses to the FLASH registers. */ + if (ha->pio_address) { + reg = (struct device_reg_2xxx __iomem *)ha->pio_address; + WRT_REG_WORD_PIO(®->flash_address, (uint16_t)addr); + WRT_REG_WORD_PIO(®->flash_data, (uint16_t)data); + } else { + WRT_REG_WORD(®->flash_address, (uint16_t)addr); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + WRT_REG_WORD(®->flash_data, (uint16_t)data); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + } +} + +/** + * qla2x00_poll_flash() - Polls flash for completion. + * @ha: HA context + * @addr: Address in flash to poll + * @poll_data: Data to be polled + * @man_id: Flash manufacturer ID + * @flash_id: Flash ID + * + * This function polls the device until bit 7 of what is read matches data + * bit 7 or until data bit 5 becomes a 1. If that hapens, the flash ROM timed + * out (a fatal error). The flash book recommeds reading bit 7 again after + * reading bit 5 as a 1. + * + * Returns 0 on success, else non-zero. + */ +static int +qla2x00_poll_flash(scsi_qla_host_t *ha, uint32_t addr, uint8_t poll_data, + uint8_t man_id, uint8_t flash_id) +{ + int status; + uint8_t flash_data; + uint32_t cnt; + + status = 1; + + /* Wait for 30 seconds for command to finish. */ + poll_data &= BIT_7; + for (cnt = 3000000; cnt; cnt--) { + flash_data = qla2x00_read_flash_byte(ha, addr); + if ((flash_data & BIT_7) == poll_data) { + status = 0; + break; + } + + if (man_id != 0x40 && man_id != 0xda) { + if ((flash_data & BIT_5) && cnt > 2) + cnt = 2; + } + udelay(10); + barrier(); + } + return status; +} + +#define IS_OEM_001(ha) \ + ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2322 && \ + (ha)->pdev->subsystem_vendor == 0x1028 && \ + (ha)->pdev->subsystem_device == 0x0170) + +/** + * qla2x00_program_flash_address() - Programs a flash address + * @ha: HA context + * @addr: Address in flash to program + * @data: Data to be written in flash + * @man_id: Flash manufacturer ID + * @flash_id: Flash ID + * + * Returns 0 on success, else non-zero. + */ +static int +qla2x00_program_flash_address(scsi_qla_host_t *ha, uint32_t addr, uint8_t data, + uint8_t man_id, uint8_t flash_id) +{ + /* Write Program Command Sequence. */ + if (IS_OEM_001(ha)) { + qla2x00_write_flash_byte(ha, 0xaaa, 0xaa); + qla2x00_write_flash_byte(ha, 0x555, 0x55); + qla2x00_write_flash_byte(ha, 0xaaa, 0xa0); + qla2x00_write_flash_byte(ha, addr, data); + } else { + if (man_id == 0xda && flash_id == 0xc1) { + qla2x00_write_flash_byte(ha, addr, data); + if (addr & 0x7e) + return 0; + } else { + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0xa0); + qla2x00_write_flash_byte(ha, addr, data); + } + } + + udelay(150); + + /* Wait for write to complete. */ + return qla2x00_poll_flash(ha, addr, data, man_id, flash_id); +} + +/** + * qla2x00_erase_flash() - Erase the flash. + * @ha: HA context + * @man_id: Flash manufacturer ID + * @flash_id: Flash ID + * + * Returns 0 on success, else non-zero. + */ +static int +qla2x00_erase_flash(scsi_qla_host_t *ha, uint8_t man_id, uint8_t flash_id) +{ + /* Individual Sector Erase Command Sequence */ + if (IS_OEM_001(ha)) { + qla2x00_write_flash_byte(ha, 0xaaa, 0xaa); + qla2x00_write_flash_byte(ha, 0x555, 0x55); + qla2x00_write_flash_byte(ha, 0xaaa, 0x80); + qla2x00_write_flash_byte(ha, 0xaaa, 0xaa); + qla2x00_write_flash_byte(ha, 0x555, 0x55); + qla2x00_write_flash_byte(ha, 0xaaa, 0x10); + } else { + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0x80); + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0x10); + } + + udelay(150); + + /* Wait for erase to complete. */ + return qla2x00_poll_flash(ha, 0x00, 0x80, man_id, flash_id); +} + +/** + * qla2x00_erase_flash_sector() - Erase a flash sector. + * @ha: HA context + * @addr: Flash sector to erase + * @sec_mask: Sector address mask + * @man_id: Flash manufacturer ID + * @flash_id: Flash ID + * + * Returns 0 on success, else non-zero. + */ +static int +qla2x00_erase_flash_sector(scsi_qla_host_t *ha, uint32_t addr, + uint32_t sec_mask, uint8_t man_id, uint8_t flash_id) +{ + /* Individual Sector Erase Command Sequence */ + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0x80); + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + if (man_id == 0x1f && flash_id == 0x13) + qla2x00_write_flash_byte(ha, addr & sec_mask, 0x10); + else + qla2x00_write_flash_byte(ha, addr & sec_mask, 0x30); + + udelay(150); + + /* Wait for erase to complete. */ + return qla2x00_poll_flash(ha, addr, 0x80, man_id, flash_id); +} + +/** + * qla2x00_get_flash_manufacturer() - Read manufacturer ID from flash chip. + * @man_id: Flash manufacturer ID + * @flash_id: Flash ID + */ +static void +qla2x00_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id, + uint8_t *flash_id) +{ + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0x90); + *man_id = qla2x00_read_flash_byte(ha, 0x0000); + *flash_id = qla2x00_read_flash_byte(ha, 0x0001); + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0xf0); +} + + +static inline void +qla2x00_suspend_hba(struct scsi_qla_host *ha) +{ + int cnt; + unsigned long flags; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + /* Suspend HBA. */ + scsi_block_requests(ha->host); + ha->isp_ops.disable_intrs(ha); + set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + + /* Pause RISC. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); + RD_REG_WORD(®->hccr); + if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) { + for (cnt = 0; cnt < 30000; cnt++) { + if ((RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) != 0) + break; + udelay(100); + } + } else { + udelay(10); + } + spin_unlock_irqrestore(&ha->hardware_lock, flags); +} + +static inline void +qla2x00_resume_hba(struct scsi_qla_host *ha) +{ + /* Resume HBA. */ + clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); + up(ha->dpc_wait); + qla2x00_wait_for_hba_online(ha); + scsi_unblock_requests(ha->host); +} + +uint8_t * +qla2x00_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf, + uint32_t offset, uint32_t length) +{ + unsigned long flags; + uint32_t addr, midpoint; + uint8_t *data; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + /* Suspend HBA. */ + qla2x00_suspend_hba(ha); + + /* Go with read. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + midpoint = ha->optrom_size / 2; + + qla2x00_flash_enable(ha); + WRT_REG_WORD(®->nvram, 0); + RD_REG_WORD(®->nvram); /* PCI Posting. */ + for (addr = offset, data = buf; addr < length; addr++, data++) { + if (addr == midpoint) { + WRT_REG_WORD(®->nvram, NVR_SELECT); + RD_REG_WORD(®->nvram); /* PCI Posting. */ + } + + *data = qla2x00_read_flash_byte(ha, addr); + } + qla2x00_flash_disable(ha); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + /* Resume HBA. */ + qla2x00_resume_hba(ha); + + return buf; +} + +int +qla2x00_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf, + uint32_t offset, uint32_t length) +{ + + int rval; + unsigned long flags; + uint8_t man_id, flash_id, sec_number, data; + uint16_t wd; + uint32_t addr, liter, sec_mask, rest_addr; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + /* Suspend HBA. */ + qla2x00_suspend_hba(ha); + + rval = QLA_SUCCESS; + sec_number = 0; + + /* Reset ISP chip. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + WRT_REG_WORD(®->ctrl_status, CSR_ISP_SOFT_RESET); + pci_read_config_word(ha->pdev, PCI_COMMAND, &wd); + + /* Go with write. */ + qla2x00_flash_enable(ha); + do { /* Loop once to provide quick error exit */ + /* Structure of flash memory based on manufacturer */ + if (IS_OEM_001(ha)) { + /* OEM variant with special flash part. */ + man_id = flash_id = 0; + rest_addr = 0xffff; + sec_mask = 0x10000; + goto update_flash; + } + qla2x00_get_flash_manufacturer(ha, &man_id, &flash_id); + switch (man_id) { + case 0x20: /* ST flash. */ + if (flash_id == 0xd2 || flash_id == 0xe3) { + /* + * ST m29w008at part - 64kb sector size with + * 32kb,8kb,8kb,16kb sectors at memory address + * 0xf0000. + */ + rest_addr = 0xffff; + sec_mask = 0x10000; + break; + } + /* + * ST m29w010b part - 16kb sector size + * Default to 16kb sectors + */ + rest_addr = 0x3fff; + sec_mask = 0x1c000; + break; + case 0x40: /* Mostel flash. */ + /* Mostel v29c51001 part - 512 byte sector size. */ + rest_addr = 0x1ff; + sec_mask = 0x1fe00; + break; + case 0xbf: /* SST flash. */ + /* SST39sf10 part - 4kb sector size. */ + rest_addr = 0xfff; + sec_mask = 0x1f000; + break; + case 0xda: /* Winbond flash. */ + /* Winbond W29EE011 part - 256 byte sector size. */ + rest_addr = 0x7f; + sec_mask = 0x1ff80; + break; + case 0xc2: /* Macronix flash. */ + /* 64k sector size. */ + if (flash_id == 0x38 || flash_id == 0x4f) { + rest_addr = 0xffff; + sec_mask = 0x10000; + break; + } + /* Fall through... */ + + case 0x1f: /* Atmel flash. */ + /* 512k sector size. */ + if (flash_id == 0x13) { + rest_addr = 0x7fffffff; + sec_mask = 0x80000000; + break; + } + /* Fall through... */ + + case 0x01: /* AMD flash. */ + if (flash_id == 0x38 || flash_id == 0x40 || + flash_id == 0x4f) { + /* Am29LV081 part - 64kb sector size. */ + /* Am29LV002BT part - 64kb sector size. */ + rest_addr = 0xffff; + sec_mask = 0x10000; + break; + } else if (flash_id == 0x3e) { + /* + * Am29LV008b part - 64kb sector size with + * 32kb,8kb,8kb,16kb sector at memory address + * h0xf0000. + */ + rest_addr = 0xffff; + sec_mask = 0x10000; + break; + } else if (flash_id == 0x20 || flash_id == 0x6e) { + /* + * Am29LV010 part or AM29f010 - 16kb sector + * size. + */ + rest_addr = 0x3fff; + sec_mask = 0x1c000; + break; + } else if (flash_id == 0x6d) { + /* Am29LV001 part - 8kb sector size. */ + rest_addr = 0x1fff; + sec_mask = 0x1e000; + break; + } + default: + /* Default to 16 kb sector size. */ + rest_addr = 0x3fff; + sec_mask = 0x1c000; + break; + } + +update_flash: + if (IS_QLA2322(ha) || IS_QLA6322(ha)) { + if (qla2x00_erase_flash(ha, man_id, flash_id)) { + rval = QLA_FUNCTION_FAILED; + break; + } + } + + for (addr = offset, liter = 0; liter < length; liter++, + addr++) { + data = buf[liter]; + /* Are we at the beginning of a sector? */ + if ((addr & rest_addr) == 0) { + if (IS_QLA2322(ha) || IS_QLA6322(ha)) { + if (addr >= 0x10000UL) { + if (((addr >> 12) & 0xf0) && + ((man_id == 0x01 && + flash_id == 0x3e) || + (man_id == 0x20 && + flash_id == 0xd2))) { + sec_number++; + if (sec_number == 1) { + rest_addr = + 0x7fff; + sec_mask = + 0x18000; + } else if ( + sec_number == 2 || + sec_number == 3) { + rest_addr = + 0x1fff; + sec_mask = + 0x1e000; + } else if ( + sec_number == 4) { + rest_addr = + 0x3fff; + sec_mask = + 0x1c000; + } + } + } + } else if (addr == ha->optrom_size / 2) { + WRT_REG_WORD(®->nvram, NVR_SELECT); + RD_REG_WORD(®->nvram); + } + + if (flash_id == 0xda && man_id == 0xc1) { + qla2x00_write_flash_byte(ha, 0x5555, + 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, + 0x55); + qla2x00_write_flash_byte(ha, 0x5555, + 0xa0); + } else if (!IS_QLA2322(ha) && !IS_QLA6322(ha)) { + /* Then erase it */ + if (qla2x00_erase_flash_sector(ha, + addr, sec_mask, man_id, + flash_id)) { + rval = QLA_FUNCTION_FAILED; + break; + } + if (man_id == 0x01 && flash_id == 0x6d) + sec_number++; + } + } + + if (man_id == 0x01 && flash_id == 0x6d) { + if (sec_number == 1 && + addr == (rest_addr - 1)) { + rest_addr = 0x0fff; + sec_mask = 0x1f000; + } else if (sec_number == 3 && (addr & 0x7ffe)) { + rest_addr = 0x3fff; + sec_mask = 0x1c000; + } + } + + if (qla2x00_program_flash_address(ha, addr, data, + man_id, flash_id)) { + rval = QLA_FUNCTION_FAILED; + break; + } + } + } while (0); + qla2x00_flash_disable(ha); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + /* Resume HBA. */ + qla2x00_resume_hba(ha); + + return rval; +} + +uint8_t * +qla24xx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf, + uint32_t offset, uint32_t length) +{ + /* Suspend HBA. */ + scsi_block_requests(ha->host); + ha->isp_ops.disable_intrs(ha); + set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + + /* Go with read. */ + qla24xx_read_flash_data(ha, (uint32_t *)buf, offset >> 2, length >> 2); + + /* Resume HBA. */ + clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + ha->isp_ops.enable_intrs(ha); + scsi_unblock_requests(ha->host); + + return buf; +} + +int +qla24xx_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf, + uint32_t offset, uint32_t length) +{ + int rval; + + /* Suspend HBA. */ + scsi_block_requests(ha->host); + ha->isp_ops.disable_intrs(ha); + set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + + /* Go with write. */ + rval = qla24xx_write_flash_data(ha, (uint32_t *)buf, offset >> 2, + length >> 2); + + /* Resume HBA -- RISC reset needed. */ + clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); + up(ha->dpc_wait); + qla2x00_wait_for_hba_online(ha); + scsi_unblock_requests(ha->host); + + return rval; +} |