diff options
Diffstat (limited to 'drivers/serial/cpm_uart')
| -rw-r--r-- | drivers/serial/cpm_uart/cpm_uart.h | 6 | ||||
| -rw-r--r-- | drivers/serial/cpm_uart/cpm_uart_core.c | 241 | ||||
| -rw-r--r-- | drivers/serial/cpm_uart/cpm_uart_cpm1.c | 16 | ||||
| -rw-r--r-- | drivers/serial/cpm_uart/cpm_uart_cpm1.h | 2 | ||||
| -rw-r--r-- | drivers/serial/cpm_uart/cpm_uart_cpm2.c | 18 | ||||
| -rw-r--r-- | drivers/serial/cpm_uart/cpm_uart_cpm2.h | 2 |
6 files changed, 260 insertions, 25 deletions
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index a8f894c78194..4e1987adc23b 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -80,14 +80,18 @@ struct uart_cpm_port { int is_portb; /* wait on close if needed */ int wait_closing; + /* value to combine with opcode to form cpm command */ + u32 command; }; +#ifndef CONFIG_PPC_CPM_NEW_BINDING extern int cpm_uart_port_map[UART_NR]; +#endif extern int cpm_uart_nr; extern struct uart_cpm_port cpm_uart_ports[UART_NR]; /* these are located in their respective files */ -void cpm_line_cr_cmd(int line, int cmd); +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd); int cpm_uart_init_portdesc(void); int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con); void cpm_uart_freebuf(struct uart_cpm_port *pinfo); diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index cefde58dbad2..8564ba2f3ec2 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -10,7 +10,7 @@ * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) * Pantelis Antoniou (panto@intracom.gr) (CPM1) * - * Copyright (C) 2004 Freescale Semiconductor, Inc. + * Copyright (C) 2004, 2007 Freescale Semiconductor, Inc. * (C) 2004 Intracom, S.A. * (C) 2005-2006 MontaVista Software, Inc. * Vitaly Bordug <vbordug@ru.mvista.com> @@ -47,6 +47,11 @@ #include <asm/irq.h> #include <asm/delay.h> #include <asm/fs_pd.h> +#include <asm/udbg.h> + +#ifdef CONFIG_PPC_CPM_NEW_BINDING +#include <linux/of_platform.h> +#endif #if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ @@ -57,12 +62,6 @@ #include "cpm_uart.h" -/***********************************************************************/ - -/* Track which ports are configured as uarts */ -int cpm_uart_port_map[UART_NR]; -/* How many ports did we config as uarts */ -int cpm_uart_nr = 0; /**************************************************************/ @@ -73,6 +72,11 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo); /**************************************************************/ +#ifndef CONFIG_PPC_CPM_NEW_BINDING +/* Track which ports are configured as uarts */ +int cpm_uart_port_map[UART_NR]; +/* How many ports did we config as uarts */ +int cpm_uart_nr; /* Place-holder for board-specific stuff */ struct platform_device* __attribute__ ((weak)) __init @@ -119,6 +123,7 @@ static int cpm_uart_id2nr(int id) /* not found or invalid argument */ return -1; } +#endif /* * Check, if transmit buffers are processed @@ -232,15 +237,14 @@ static void cpm_uart_enable_ms(struct uart_port *port) static void cpm_uart_break_ctl(struct uart_port *port, int break_state) { struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - int line = pinfo - cpm_uart_ports; pr_debug("CPM uart[%d]:break ctrl, break_state: %d\n", port->line, break_state); if (break_state) - cpm_line_cr_cmd(line, CPM_CR_STOP_TX); + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); else - cpm_line_cr_cmd(line, CPM_CR_RESTART_TX); + cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); } /* @@ -407,7 +411,6 @@ static int cpm_uart_startup(struct uart_port *port) { int retval; struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - int line = pinfo - cpm_uart_ports; pr_debug("CPM uart[%d]:startup\n", port->line); @@ -426,7 +429,7 @@ static int cpm_uart_startup(struct uart_port *port) } if (!(pinfo->flags & FLAG_CONSOLE)) - cpm_line_cr_cmd(line,CPM_CR_INIT_TRX); + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); return 0; } @@ -442,7 +445,6 @@ inline void cpm_uart_wait_until_send(struct uart_cpm_port *pinfo) static void cpm_uart_shutdown(struct uart_port *port) { struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - int line = pinfo - cpm_uart_ports; pr_debug("CPM uart[%d]:shutdown\n", port->line); @@ -473,9 +475,9 @@ static void cpm_uart_shutdown(struct uart_port *port) /* Shut them really down and reinit buffer descriptors */ if (IS_SMC(pinfo)) - cpm_line_cr_cmd(line, CPM_CR_STOP_TX); + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); else - cpm_line_cr_cmd(line, CPM_CR_GRA_STOP_TX); + cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); cpm_uart_initbd(pinfo); } @@ -595,7 +597,6 @@ static void cpm_uart_set_termios(struct uart_port *port, cpm_set_brg(pinfo->brg - 1, baud); spin_unlock_irqrestore(&port->lock, flags); - } static const char *cpm_uart_type(struct uart_port *port) @@ -742,7 +743,6 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo) static void cpm_uart_init_scc(struct uart_cpm_port *pinfo) { - int line = pinfo - cpm_uart_ports; volatile scc_t *scp; volatile scc_uart_t *sup; @@ -783,7 +783,7 @@ static void cpm_uart_init_scc(struct uart_cpm_port *pinfo) /* Send the CPM an initialize command. */ - cpm_line_cr_cmd(line, CPM_CR_INIT_TRX); + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); /* Set UART mode, 8 bit, no parity, one stop. * Enable receive and transmit. @@ -803,7 +803,6 @@ static void cpm_uart_init_scc(struct uart_cpm_port *pinfo) static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) { - int line = pinfo - cpm_uart_ports; volatile smc_t *sp; volatile smc_uart_t *up; @@ -840,7 +839,7 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) up->smc_brkec = 0; up->smc_brkcr = 1; - cpm_line_cr_cmd(line, CPM_CR_INIT_TRX); + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); /* Set UART mode, 8 bit, no parity, one stop. * Enable receive and transmit. @@ -929,6 +928,85 @@ static struct uart_ops cpm_uart_pops = { .verify_port = cpm_uart_verify_port, }; +#ifdef CONFIG_PPC_CPM_NEW_BINDING +struct uart_cpm_port cpm_uart_ports[UART_NR]; + +int cpm_uart_init_port(struct device_node *np, struct uart_cpm_port *pinfo) +{ + const u32 *data; + void __iomem *mem, __iomem *pram; + int len; + int ret; + + data = of_get_property(np, "fsl,cpm-brg", &len); + if (!data || len != 4) { + printk(KERN_ERR "CPM UART %s has no/invalid " + "fsl,cpm-brg property.\n", np->name); + return -EINVAL; + } + pinfo->brg = *data; + + data = of_get_property(np, "fsl,cpm-command", &len); + if (!data || len != 4) { + printk(KERN_ERR "CPM UART %s has no/invalid " + "fsl,cpm-command property.\n", np->name); + return -EINVAL; + } + pinfo->command = *data; + + mem = of_iomap(np, 0); + if (!mem) + return -ENOMEM; + + pram = of_iomap(np, 1); + if (!pram) { + ret = -ENOMEM; + goto out_mem; + } + + if (of_device_is_compatible(np, "fsl,cpm1-scc-uart") || + of_device_is_compatible(np, "fsl,cpm2-scc-uart")) { + pinfo->sccp = mem; + pinfo->sccup = pram; + } else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") || + of_device_is_compatible(np, "fsl,cpm2-smc-uart")) { + pinfo->flags |= FLAG_SMC; + pinfo->smcp = mem; + pinfo->smcup = pram; + } else { + ret = -ENODEV; + goto out_pram; + } + + pinfo->tx_nrfifos = TX_NUM_FIFO; + pinfo->tx_fifosize = TX_BUF_SIZE; + pinfo->rx_nrfifos = RX_NUM_FIFO; + pinfo->rx_fifosize = RX_BUF_SIZE; + + pinfo->port.uartclk = ppc_proc_freq; + pinfo->port.mapbase = (unsigned long)mem; + pinfo->port.type = PORT_CPM; + pinfo->port.ops = &cpm_uart_pops, + pinfo->port.iotype = UPIO_MEM; + spin_lock_init(&pinfo->port.lock); + + pinfo->port.irq = of_irq_to_resource(np, 0, NULL); + if (pinfo->port.irq == NO_IRQ) { + ret = -EINVAL; + goto out_pram; + } + + return cpm_uart_request_port(&pinfo->port); + +out_pram: + iounmap(pram); +out_mem: + iounmap(mem); + return ret; +} + +#else + struct uart_cpm_port cpm_uart_ports[UART_NR] = { [UART_SMC1] = { .port = { @@ -1072,6 +1150,7 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con) return 0; } +#endif #ifdef CONFIG_SERIAL_CPM_CONSOLE /* @@ -1083,8 +1162,12 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con) static void cpm_uart_console_write(struct console *co, const char *s, u_int count) { +#ifdef CONFIG_PPC_CPM_NEW_BINDING + struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index]; +#else struct uart_cpm_port *pinfo = &cpm_uart_ports[cpm_uart_port_map[co->index]]; +#endif unsigned int i; volatile cbd_t *bdp, *bdbase; volatile unsigned char *cp; @@ -1155,13 +1238,47 @@ static void cpm_uart_console_write(struct console *co, const char *s, static int __init cpm_uart_console_setup(struct console *co, char *options) { - struct uart_port *port; - struct uart_cpm_port *pinfo; int baud = 38400; int bits = 8; int parity = 'n'; int flow = 'n'; int ret; + struct uart_cpm_port *pinfo; + struct uart_port *port; + +#ifdef CONFIG_PPC_CPM_NEW_BINDING + struct device_node *np = NULL; + int i = 0; + + if (co->index >= UART_NR) { + printk(KERN_ERR "cpm_uart: console index %d too high\n", + co->index); + return -ENODEV; + } + + do { + np = of_find_node_by_type(np, "serial"); + if (!np) + return -ENODEV; + + if (!of_device_is_compatible(np, "fsl,cpm1-smc-uart") && + !of_device_is_compatible(np, "fsl,cpm1-scc-uart") && + !of_device_is_compatible(np, "fsl,cpm2-smc-uart") && + !of_device_is_compatible(np, "fsl,cpm2-scc-uart")) + i--; + } while (i++ != co->index); + + pinfo = &cpm_uart_ports[co->index]; + + pinfo->flags |= FLAG_CONSOLE; + port = &pinfo->port; + + ret = cpm_uart_init_port(np, pinfo); + of_node_put(np); + if (ret) + return ret; + +#else struct fs_uart_platform_info *pdata; struct platform_device* pdev = early_uart_get_pdev(co->index); @@ -1188,6 +1305,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) } pinfo->flags |= FLAG_CONSOLE; +#endif if (options) { uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -1196,6 +1314,10 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) baud = 9600; } +#ifdef CONFIG_PPC_EARLY_DEBUG_CPM + udbg_putc = NULL; +#endif + if (IS_SMC(pinfo)) { pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX); pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); @@ -1252,7 +1374,81 @@ static struct uart_driver cpm_reg = { .major = SERIAL_CPM_MAJOR, .minor = SERIAL_CPM_MINOR, .cons = CPM_UART_CONSOLE, + .nr = UART_NR, +}; + +#ifdef CONFIG_PPC_CPM_NEW_BINDING +static int probe_index; + +static int __devinit cpm_uart_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + int index = probe_index++; + struct uart_cpm_port *pinfo = &cpm_uart_ports[index]; + int ret; + + pinfo->port.line = index; + + if (index >= UART_NR) + return -ENODEV; + + dev_set_drvdata(&ofdev->dev, pinfo); + + ret = cpm_uart_init_port(ofdev->node, pinfo); + if (ret) + return ret; + + return uart_add_one_port(&cpm_reg, &pinfo->port); +} + +static int __devexit cpm_uart_remove(struct of_device *ofdev) +{ + struct uart_cpm_port *pinfo = dev_get_drvdata(&ofdev->dev); + return uart_remove_one_port(&cpm_reg, &pinfo->port); +} + +static struct of_device_id cpm_uart_match[] = { + { + .compatible = "fsl,cpm1-smc-uart", + }, + { + .compatible = "fsl,cpm1-scc-uart", + }, + { + .compatible = "fsl,cpm2-smc-uart", + }, + { + .compatible = "fsl,cpm2-scc-uart", + }, + {} }; + +static struct of_platform_driver cpm_uart_driver = { + .name = "cpm_uart", + .match_table = cpm_uart_match, + .probe = cpm_uart_probe, + .remove = cpm_uart_remove, + }; + +static int __init cpm_uart_init(void) +{ + int ret = uart_register_driver(&cpm_reg); + if (ret) + return ret; + + ret = of_register_platform_driver(&cpm_uart_driver); + if (ret) + uart_unregister_driver(&cpm_reg); + + return ret; +} + +static void __exit cpm_uart_exit(void) +{ + of_unregister_platform_driver(&cpm_uart_driver); + uart_unregister_driver(&cpm_reg); +} +#else static int cpm_uart_drv_probe(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -1380,6 +1576,7 @@ static void __exit cpm_uart_exit(void) driver_unregister(&cpm_smc_uart_driver); uart_unregister_driver(&cpm_reg); } +#endif module_init(cpm_uart_init); module_exit(cpm_uart_exit); diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index 8c6324ed0202..4647f55e19f1 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -49,9 +49,20 @@ /**************************************************************/ -void cpm_line_cr_cmd(int line, int cmd) +#ifdef CONFIG_PPC_CPM_NEW_BINDING +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) +{ + u16 __iomem *cpcr = &cpmp->cp_cpcr; + + out_be16(cpcr, port->command | (cmd << 8) | CPM_CR_FLG); + while (in_be16(cpcr) & CPM_CR_FLG) + ; +} +#else +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) { ushort val; + int line = port - cpm_uart_ports; volatile cpm8xx_t *cp = cpmp; switch (line) { @@ -114,6 +125,7 @@ void scc4_lineif(struct uart_cpm_port *pinfo) /* XXX SCC4: insert port configuration here */ pinfo->brg = 4; } +#endif /* * Allocate DP-Ram and memory buffers. We need to allocate a transmit and @@ -184,6 +196,7 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo) cpm_dpfree(pinfo->dp_addr); } +#ifndef CONFIG_PPC_CPM_NEW_BINDING /* Setup any dynamic params in the uart desc */ int cpm_uart_init_portdesc(void) { @@ -279,3 +292,4 @@ int cpm_uart_init_portdesc(void) #endif return 0; } +#endif diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h index 2a6477834c3e..69f523a442e0 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.h +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.h @@ -13,12 +13,14 @@ #include <asm/commproc.h> /* defines for IRQs */ +#ifndef CONFIG_PPC_CPM_NEW_BINDING #define SMC1_IRQ (CPM_IRQ_OFFSET + CPMVEC_SMC1) #define SMC2_IRQ (CPM_IRQ_OFFSET + CPMVEC_SMC2) #define SCC1_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC1) #define SCC2_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC2) #define SCC3_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC3) #define SCC4_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC4) +#endif static inline void cpm_set_brg(int brg, int baud) { diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index 7b61d805ebe9..7ebce263ad40 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -49,9 +49,22 @@ /**************************************************************/ -void cpm_line_cr_cmd(int line, int cmd) +#ifdef CONFIG_PPC_CPM_NEW_BINDING +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) +{ + cpm_cpm2_t __iomem *cp = cpm2_map(im_cpm); + + out_be32(&cp->cp_cpcr, port->command | cmd | CPM_CR_FLG); + while (in_be32(&cp->cp_cpcr) & CPM_CR_FLG) + ; + + cpm2_unmap(cp); +} +#else +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) { ulong val; + int line = port - cpm_uart_ports; volatile cpm_cpm2_t *cp = cpm2_map(im_cpm); @@ -211,6 +224,7 @@ void scc4_lineif(struct uart_cpm_port *pinfo) cpm2_unmap(cpmux); cpm2_unmap(io); } +#endif /* * Allocate DP-Ram and memory buffers. We need to allocate a transmit and @@ -281,6 +295,7 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo) cpm_dpfree(pinfo->dp_addr); } +#ifndef CONFIG_PPC_CPM_NEW_BINDING /* Setup any dynamic params in the uart desc */ int cpm_uart_init_portdesc(void) { @@ -386,3 +401,4 @@ int cpm_uart_init_portdesc(void) return 0; } +#endif diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h index 1b3219f56c81..e7717ece0831 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.h +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.h @@ -13,12 +13,14 @@ #include <asm/cpm2.h> /* defines for IRQs */ +#ifndef CONFIG_PPC_CPM_NEW_BINDING #define SMC1_IRQ SIU_INT_SMC1 #define SMC2_IRQ SIU_INT_SMC2 #define SCC1_IRQ SIU_INT_SCC1 #define SCC2_IRQ SIU_INT_SCC2 #define SCC3_IRQ SIU_INT_SCC3 #define SCC4_IRQ SIU_INT_SCC4 +#endif static inline void cpm_set_brg(int brg, int baud) { |