diff options
Diffstat (limited to 'drivers/serial/crisv10.h')
| -rw-r--r-- | drivers/serial/crisv10.h | 146 |
1 files changed, 146 insertions, 0 deletions
diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h new file mode 100644 index 000000000000..ccd0f32b7372 --- /dev/null +++ b/drivers/serial/crisv10.h @@ -0,0 +1,146 @@ +/* + * serial.h: Arch-dep definitions for the Etrax100 serial driver. + * + * Copyright (C) 1998-2007 Axis Communications AB + */ + +#ifndef _ETRAX_SERIAL_H +#define _ETRAX_SERIAL_H + +#include <linux/circ_buf.h> +#include <asm/termios.h> +#include <asm/dma.h> +#include <asm/arch/io_interface_mux.h> + +/* Software state per channel */ + +#ifdef __KERNEL__ +/* + * This is our internal structure for each serial port's state. + * + * Many fields are paralleled by the structure used by the serial_struct + * structure. + * + * For definitions of the flags field, see tty.h + */ + +#define SERIAL_RECV_DESCRIPTORS 8 + +struct etrax_recv_buffer { + struct etrax_recv_buffer *next; + unsigned short length; + unsigned char error; + unsigned char pad; + + unsigned char buffer[0]; +}; + +struct e100_serial { + int baud; + volatile u8 *port; /* R_SERIALx_CTRL */ + u32 irq; /* bitnr in R_IRQ_MASK2 for dmaX_descr */ + + /* Output registers */ + volatile u8 *oclrintradr; /* adr to R_DMA_CHx_CLR_INTR */ + volatile u32 *ofirstadr; /* adr to R_DMA_CHx_FIRST */ + volatile u8 *ocmdadr; /* adr to R_DMA_CHx_CMD */ + const volatile u8 *ostatusadr; /* adr to R_DMA_CHx_STATUS */ + + /* Input registers */ + volatile u8 *iclrintradr; /* adr to R_DMA_CHx_CLR_INTR */ + volatile u32 *ifirstadr; /* adr to R_DMA_CHx_FIRST */ + volatile u8 *icmdadr; /* adr to R_DMA_CHx_CMD */ + volatile u32 *idescradr; /* adr to R_DMA_CHx_DESCR */ + + int flags; /* defined in tty.h */ + + u8 rx_ctrl; /* shadow for R_SERIALx_REC_CTRL */ + u8 tx_ctrl; /* shadow for R_SERIALx_TR_CTRL */ + u8 iseteop; /* bit number for R_SET_EOP for the input dma */ + int enabled; /* Set to 1 if the port is enabled in HW config */ + + u8 dma_out_enabled; /* Set to 1 if DMA should be used */ + u8 dma_in_enabled; /* Set to 1 if DMA should be used */ + + /* end of fields defined in rs_table[] in .c-file */ + int dma_owner; + unsigned int dma_in_nbr; + unsigned int dma_out_nbr; + unsigned int dma_in_irq_nbr; + unsigned int dma_out_irq_nbr; + unsigned long dma_in_irq_flags; + unsigned long dma_out_irq_flags; + char *dma_in_irq_description; + char *dma_out_irq_description; + + enum cris_io_interface io_if; + char *io_if_description; + + u8 uses_dma_in; /* Set to 1 if DMA is used */ + u8 uses_dma_out; /* Set to 1 if DMA is used */ + u8 forced_eop; /* a fifo eop has been forced */ + int baud_base; /* For special baudrates */ + int custom_divisor; /* For special baudrates */ + struct etrax_dma_descr tr_descr; + struct etrax_dma_descr rec_descr[SERIAL_RECV_DESCRIPTORS]; + int cur_rec_descr; + + volatile int tr_running; /* 1 if output is running */ + + struct tty_struct *tty; + int read_status_mask; + int ignore_status_mask; + int x_char; /* xon/xoff character */ + int close_delay; + unsigned short closing_wait; + unsigned short closing_wait2; + unsigned long event; + unsigned long last_active; + int line; + int type; /* PORT_ETRAX */ + int count; /* # of fd on device */ + int blocked_open; /* # of blocked opens */ + struct circ_buf xmit; + struct etrax_recv_buffer *first_recv_buffer; + struct etrax_recv_buffer *last_recv_buffer; + unsigned int recv_cnt; + unsigned int max_recv_cnt; + + struct work_struct work; + struct async_icount icount; /* error-statistics etc.*/ + struct ktermios normal_termios; + struct ktermios callout_termios; + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; + + unsigned long char_time_usec; /* The time for 1 char, in usecs */ + unsigned long flush_time_usec; /* How often we should flush */ + unsigned long last_tx_active_usec; /* Last tx usec in the jiffies */ + unsigned long last_tx_active; /* Last tx time in jiffies */ + unsigned long last_rx_active_usec; /* Last rx usec in the jiffies */ + unsigned long last_rx_active; /* Last rx time in jiffies */ + + int break_detected_cnt; + int errorcode; + +#ifdef CONFIG_ETRAX_RS485 + struct rs485_control rs485; /* RS-485 support */ +#endif +}; + +/* this PORT is not in the standard serial.h. it's not actually used for + * anything since we only have one type of async serial-port anyway in this + * system. + */ + +#define PORT_ETRAX 1 + +/* + * Events are used to schedule things to happen at timer-interrupt + * time, instead of at rs interrupt time. + */ +#define RS_EVENT_WRITE_WAKEUP 0 + +#endif /* __KERNEL__ */ + +#endif /* !_ETRAX_SERIAL_H */ |