diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/Kconfig | 25 | ||||
| -rw-r--r-- | drivers/serial/cpm_uart/cpm_uart.h | 48 | ||||
| -rw-r--r-- | drivers/serial/cpm_uart/cpm_uart_core.c | 539 | ||||
| -rw-r--r-- | drivers/serial/cpm_uart/cpm_uart_cpm1.c | 18 | ||||
| -rw-r--r-- | drivers/serial/cpm_uart/cpm_uart_cpm1.h | 16 | ||||
| -rw-r--r-- | drivers/serial/cpm_uart/cpm_uart_cpm2.c | 24 | ||||
| -rw-r--r-- | drivers/serial/cpm_uart/cpm_uart_cpm2.h | 16 | ||||
| -rw-r--r-- | drivers/serial/mpc52xx_uart.c | 2 | ||||
| -rw-r--r-- | drivers/serial/pmac_zilog.c | 22 | ||||
| -rw-r--r-- | drivers/serial/uartlite.c | 286 |
10 files changed, 735 insertions, 261 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 81b52b7cca21..d6ae38e55d01 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -986,6 +986,31 @@ config SERIAL_PMACZILOG PowerMac machines. Say Y or M if you want to be able to these serial ports. +config SERIAL_PMACZILOG_TTYS + bool "Use ttySn device nodes for Zilog z85c30" + depends on SERIAL_PMACZILOG + help + The pmac_zilog driver for the z85C30 chip on many powermacs + historically used the device numbers for /dev/ttySn. The + 8250 serial port driver also uses these numbers, which means + the two drivers being unable to coexist; you could not use + both z85C30 and 8250 type ports at the same time. + + If this option is not selected, the pmac_zilog driver will + use the device numbers allocated for /dev/ttyPZn. This allows + the pmac_zilog and 8250 drivers to co-exist, but may cause + existing userspace setups to break. Programs that need to + access the built-in serial ports on powermacs will need to + be reconfigured to use /dev/ttyPZn instead of /dev/ttySn. + + If you enable this option, any z85c30 ports in the system will + be registered as ttyS0 onwards as in the past, and you will be + unable to use the 8250 module for PCMCIA or other 16C550-style + UARTs. + + Say N unless you need the z85c30 ports on your powermac + to appear as /dev/ttySn. + config SERIAL_PMACZILOG_CONSOLE bool "Console on PowerMac z85c30 serial port" depends on SERIAL_PMACZILOG=y diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index a8f894c78194..32b9737759c4 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -56,21 +56,21 @@ struct uart_cpm_port { u16 rx_fifosize; u16 tx_nrfifos; u16 tx_fifosize; - smc_t *smcp; - smc_uart_t *smcup; - scc_t *sccp; - scc_uart_t *sccup; - volatile cbd_t *rx_bd_base; - volatile cbd_t *rx_cur; - volatile cbd_t *tx_bd_base; - volatile cbd_t *tx_cur; + smc_t __iomem *smcp; + smc_uart_t __iomem *smcup; + scc_t __iomem *sccp; + scc_uart_t __iomem *sccup; + cbd_t __iomem *rx_bd_base; + cbd_t __iomem *rx_cur; + cbd_t __iomem *tx_bd_base; + cbd_t __iomem *tx_cur; unsigned char *tx_buf; unsigned char *rx_buf; u32 flags; void (*set_lineif)(struct uart_cpm_port *); u8 brg; uint dp_addr; - void *mem_addr; + void *mem_addr; dma_addr_t dma_addr; u32 mem_size; /* helpers */ @@ -80,14 +80,18 @@ struct uart_cpm_port { int is_portb; /* wait on close if needed */ int wait_closing; + /* value to combine with opcode to form cpm command */ + u32 command; }; +#ifndef CONFIG_PPC_CPM_NEW_BINDING extern int cpm_uart_port_map[UART_NR]; +#endif extern int cpm_uart_nr; extern struct uart_cpm_port cpm_uart_ports[UART_NR]; /* these are located in their respective files */ -void cpm_line_cr_cmd(int line, int cmd); +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd); int cpm_uart_init_portdesc(void); int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con); void cpm_uart_freebuf(struct uart_cpm_port *pinfo); @@ -102,34 +106,36 @@ void scc4_lineif(struct uart_cpm_port *pinfo); /* virtual to phys transtalion */ -static inline unsigned long cpu2cpm_addr(void* addr, struct uart_cpm_port *pinfo) +static inline unsigned long cpu2cpm_addr(void *addr, + struct uart_cpm_port *pinfo) { int offset; u32 val = (u32)addr; + u32 mem = (u32)pinfo->mem_addr; /* sane check */ - if (likely((val >= (u32)pinfo->mem_addr)) && - (val<((u32)pinfo->mem_addr + pinfo->mem_size))) { - offset = val - (u32)pinfo->mem_addr; - return pinfo->dma_addr+offset; + if (likely(val >= mem && val < mem + pinfo->mem_size)) { + offset = val - mem; + return pinfo->dma_addr + offset; } /* something nasty happened */ BUG(); return 0; } -static inline void *cpm2cpu_addr(unsigned long addr, struct uart_cpm_port *pinfo) +static inline void *cpm2cpu_addr(unsigned long addr, + struct uart_cpm_port *pinfo) { int offset; u32 val = addr; + u32 dma = (u32)pinfo->dma_addr; /* sane check */ - if (likely((val >= pinfo->dma_addr) && - (val<(pinfo->dma_addr + pinfo->mem_size)))) { - offset = val - (u32)pinfo->dma_addr; - return (void*)(pinfo->mem_addr+offset); + if (likely(val >= dma && val < dma + pinfo->mem_size)) { + offset = val - dma; + return pinfo->mem_addr + offset; } /* something nasty happened */ BUG(); - return 0; + return NULL; } diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index cefde58dbad2..b5e4478de0e3 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -10,7 +10,7 @@ * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) * Pantelis Antoniou (panto@intracom.gr) (CPM1) * - * Copyright (C) 2004 Freescale Semiconductor, Inc. + * Copyright (C) 2004, 2007 Freescale Semiconductor, Inc. * (C) 2004 Intracom, S.A. * (C) 2005-2006 MontaVista Software, Inc. * Vitaly Bordug <vbordug@ru.mvista.com> @@ -47,6 +47,11 @@ #include <asm/irq.h> #include <asm/delay.h> #include <asm/fs_pd.h> +#include <asm/udbg.h> + +#ifdef CONFIG_PPC_CPM_NEW_BINDING +#include <linux/of_platform.h> +#endif #if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ @@ -57,12 +62,6 @@ #include "cpm_uart.h" -/***********************************************************************/ - -/* Track which ports are configured as uarts */ -int cpm_uart_port_map[UART_NR]; -/* How many ports did we config as uarts */ -int cpm_uart_nr = 0; /**************************************************************/ @@ -73,6 +72,11 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo); /**************************************************************/ +#ifndef CONFIG_PPC_CPM_NEW_BINDING +/* Track which ports are configured as uarts */ +int cpm_uart_port_map[UART_NR]; +/* How many ports did we config as uarts */ +int cpm_uart_nr; /* Place-holder for board-specific stuff */ struct platform_device* __attribute__ ((weak)) __init @@ -119,6 +123,7 @@ static int cpm_uart_id2nr(int id) /* not found or invalid argument */ return -1; } +#endif /* * Check, if transmit buffers are processed @@ -126,14 +131,14 @@ static int cpm_uart_id2nr(int id) static unsigned int cpm_uart_tx_empty(struct uart_port *port) { struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - volatile cbd_t *bdp = pinfo->tx_bd_base; + cbd_t __iomem *bdp = pinfo->tx_bd_base; int ret = 0; while (1) { - if (bdp->cbd_sc & BD_SC_READY) + if (in_be16(&bdp->cbd_sc) & BD_SC_READY) break; - if (bdp->cbd_sc & BD_SC_WRAP) { + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) { ret = TIOCSER_TEMT; break; } @@ -162,15 +167,15 @@ static unsigned int cpm_uart_get_mctrl(struct uart_port *port) static void cpm_uart_stop_tx(struct uart_port *port) { struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - volatile smc_t *smcp = pinfo->smcp; - volatile scc_t *sccp = pinfo->sccp; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; pr_debug("CPM uart[%d]:stop tx\n", port->line); if (IS_SMC(pinfo)) - smcp->smc_smcm &= ~SMCM_TX; + clrbits8(&smcp->smc_smcm, SMCM_TX); else - sccp->scc_sccm &= ~UART_SCCM_TX; + clrbits16(&sccp->scc_sccm, UART_SCCM_TX); } /* @@ -179,24 +184,24 @@ static void cpm_uart_stop_tx(struct uart_port *port) static void cpm_uart_start_tx(struct uart_port *port) { struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - volatile smc_t *smcp = pinfo->smcp; - volatile scc_t *sccp = pinfo->sccp; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; pr_debug("CPM uart[%d]:start tx\n", port->line); if (IS_SMC(pinfo)) { - if (smcp->smc_smcm & SMCM_TX) + if (in_8(&smcp->smc_smcm) & SMCM_TX) return; } else { - if (sccp->scc_sccm & UART_SCCM_TX) + if (in_be16(&sccp->scc_sccm) & UART_SCCM_TX) return; } if (cpm_uart_tx_pump(port) != 0) { if (IS_SMC(pinfo)) { - smcp->smc_smcm |= SMCM_TX; + setbits8(&smcp->smc_smcm, SMCM_TX); } else { - sccp->scc_sccm |= UART_SCCM_TX; + setbits16(&sccp->scc_sccm, UART_SCCM_TX); } } } @@ -207,15 +212,15 @@ static void cpm_uart_start_tx(struct uart_port *port) static void cpm_uart_stop_rx(struct uart_port *port) { struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - volatile smc_t *smcp = pinfo->smcp; - volatile scc_t *sccp = pinfo->sccp; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; pr_debug("CPM uart[%d]:stop rx\n", port->line); if (IS_SMC(pinfo)) - smcp->smc_smcm &= ~SMCM_RX; + clrbits8(&smcp->smc_smcm, SMCM_RX); else - sccp->scc_sccm &= ~UART_SCCM_RX; + clrbits16(&sccp->scc_sccm, UART_SCCM_RX); } /* @@ -232,15 +237,14 @@ static void cpm_uart_enable_ms(struct uart_port *port) static void cpm_uart_break_ctl(struct uart_port *port, int break_state) { struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - int line = pinfo - cpm_uart_ports; pr_debug("CPM uart[%d]:break ctrl, break_state: %d\n", port->line, break_state); if (break_state) - cpm_line_cr_cmd(line, CPM_CR_STOP_TX); + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); else - cpm_line_cr_cmd(line, CPM_CR_RESTART_TX); + cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); } /* @@ -259,10 +263,11 @@ static void cpm_uart_int_tx(struct uart_port *port) static void cpm_uart_int_rx(struct uart_port *port) { int i; - unsigned char ch, *cp; + unsigned char ch; + u8 *cp; struct tty_struct *tty = port->info->tty; struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - volatile cbd_t *bdp; + cbd_t __iomem *bdp; u16 status; unsigned int flg; @@ -274,13 +279,13 @@ static void cpm_uart_int_rx(struct uart_port *port) bdp = pinfo->rx_cur; for (;;) { /* get status */ - status = bdp->cbd_sc; + status = in_be16(&bdp->cbd_sc); /* If this one is empty, return happy */ if (status & BD_SC_EMPTY) break; /* get number of characters, and check spce in flip-buffer */ - i = bdp->cbd_datlen; + i = in_be16(&bdp->cbd_datlen); /* If we have not enough room in tty flip buffer, then we try * later, which will be the next rx-interrupt or a timeout @@ -291,7 +296,7 @@ static void cpm_uart_int_rx(struct uart_port *port) } /* get pointer */ - cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); + cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); /* loop through the buffer */ while (i-- > 0) { @@ -311,10 +316,11 @@ static void cpm_uart_int_rx(struct uart_port *port) } /* End while (i--) */ /* This BD is ready to be used again. Clear status. get next */ - bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID); - bdp->cbd_sc |= BD_SC_EMPTY; + clrbits16(&bdp->cbd_sc, BD_SC_BR | BD_SC_FR | BD_SC_PR | + BD_SC_OV | BD_SC_ID); + setbits16(&bdp->cbd_sc, BD_SC_EMPTY); - if (bdp->cbd_sc & BD_SC_WRAP) + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) bdp = pinfo->rx_bd_base; else bdp++; @@ -322,7 +328,7 @@ static void cpm_uart_int_rx(struct uart_port *port) } /* End for (;;) */ /* Write back buffer pointer */ - pinfo->rx_cur = (volatile cbd_t *) bdp; + pinfo->rx_cur = bdp; /* activate BH processing */ tty_flip_buffer_push(tty); @@ -376,14 +382,14 @@ static irqreturn_t cpm_uart_int(int irq, void *data) u8 events; struct uart_port *port = (struct uart_port *)data; struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - volatile smc_t *smcp = pinfo->smcp; - volatile scc_t *sccp = pinfo->sccp; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; pr_debug("CPM uart[%d]:IRQ\n", port->line); if (IS_SMC(pinfo)) { - events = smcp->smc_smce; - smcp->smc_smce = events; + events = in_8(&smcp->smc_smce); + out_8(&smcp->smc_smce, events); if (events & SMCM_BRKE) uart_handle_break(port); if (events & SMCM_RX) @@ -391,8 +397,8 @@ static irqreturn_t cpm_uart_int(int irq, void *data) if (events & SMCM_TX) cpm_uart_int_tx(port); } else { - events = sccp->scc_scce; - sccp->scc_scce = events; + events = in_be16(&sccp->scc_scce); + out_be16(&sccp->scc_scce, events); if (events & UART_SCCM_BRKE) uart_handle_break(port); if (events & UART_SCCM_RX) @@ -407,7 +413,6 @@ static int cpm_uart_startup(struct uart_port *port) { int retval; struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - int line = pinfo - cpm_uart_ports; pr_debug("CPM uart[%d]:startup\n", port->line); @@ -418,15 +423,15 @@ static int cpm_uart_startup(struct uart_port *port) /* Startup rx-int */ if (IS_SMC(pinfo)) { - pinfo->smcp->smc_smcm |= SMCM_RX; - pinfo->smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN); + setbits8(&pinfo->smcp->smc_smcm, SMCM_RX); + setbits16(&pinfo->smcp->smc_smcmr, (SMCMR_REN | SMCMR_TEN)); } else { - pinfo->sccp->scc_sccm |= UART_SCCM_RX; - pinfo->sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); + setbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); + setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT)); } if (!(pinfo->flags & FLAG_CONSOLE)) - cpm_line_cr_cmd(line,CPM_CR_INIT_TRX); + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); return 0; } @@ -442,7 +447,6 @@ inline void cpm_uart_wait_until_send(struct uart_cpm_port *pinfo) static void cpm_uart_shutdown(struct uart_port *port) { struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - int line = pinfo - cpm_uart_ports; pr_debug("CPM uart[%d]:shutdown\n", port->line); @@ -462,20 +466,20 @@ static void cpm_uart_shutdown(struct uart_port *port) /* Stop uarts */ if (IS_SMC(pinfo)) { - volatile smc_t *smcp = pinfo->smcp; - smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX); + smc_t __iomem *smcp = pinfo->smcp; + clrbits16(&smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); + clrbits8(&smcp->smc_smcm, SMCM_RX | SMCM_TX); } else { - volatile scc_t *sccp = pinfo->sccp; - sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); + scc_t __iomem *sccp = pinfo->sccp; + clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); + clrbits16(&sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); } /* Shut them really down and reinit buffer descriptors */ if (IS_SMC(pinfo)) - cpm_line_cr_cmd(line, CPM_CR_STOP_TX); + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); else - cpm_line_cr_cmd(line, CPM_CR_GRA_STOP_TX); + cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); cpm_uart_initbd(pinfo); } @@ -490,8 +494,8 @@ static void cpm_uart_set_termios(struct uart_port *port, u16 cval, scval, prev_mode; int bits, sbits; struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - volatile smc_t *smcp = pinfo->smcp; - volatile scc_t *sccp = pinfo->sccp; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; pr_debug("CPM uart[%d]:set_termios\n", port->line); @@ -586,16 +590,15 @@ static void cpm_uart_set_termios(struct uart_port *port, * enables, because we want to put them back if they were * present. */ - prev_mode = smcp->smc_smcmr; - smcp->smc_smcmr = smcr_mk_clen(bits) | cval | SMCMR_SM_UART; - smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN)); + prev_mode = in_be16(&smcp->smc_smcmr); + out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval | SMCMR_SM_UART); + setbits16(&smcp->smc_smcmr, (prev_mode & (SMCMR_REN | SMCMR_TEN))); } else { - sccp->scc_psmr = (sbits << 12) | scval; + out_be16(&sccp->scc_psmr, (sbits << 12) | scval); } cpm_set_brg(pinfo->brg - 1, baud); spin_unlock_irqrestore(&port->lock, flags); - } static const char *cpm_uart_type(struct uart_port *port) @@ -629,8 +632,8 @@ static int cpm_uart_verify_port(struct uart_port *port, */ static int cpm_uart_tx_pump(struct uart_port *port) { - volatile cbd_t *bdp; - unsigned char *p; + cbd_t __iomem *bdp; + u8 *p; int count; struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; struct circ_buf *xmit = &port->info->xmit; @@ -640,13 +643,14 @@ static int cpm_uart_tx_pump(struct uart_port *port) /* Pick next descriptor and fill from buffer */ bdp = pinfo->tx_cur; - p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); + p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); *p++ = port->x_char; - bdp->cbd_datlen = 1; - bdp->cbd_sc |= BD_SC_READY; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); /* Get next BD. */ - if (bdp->cbd_sc & BD_SC_WRAP) + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) bdp = pinfo->tx_bd_base; else bdp++; @@ -665,9 +669,10 @@ static int cpm_uart_tx_pump(struct uart_port *port) /* Pick next descriptor and fill from buffer */ bdp = pinfo->tx_cur; - while (!(bdp->cbd_sc & BD_SC_READY) && (xmit->tail != xmit->head)) { + while (!(in_be16(&bdp->cbd_sc) & BD_SC_READY) && + xmit->tail != xmit->head) { count = 0; - p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); + p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); while (count < pinfo->tx_fifosize) { *p++ = xmit->buf[xmit->tail]; xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -676,11 +681,10 @@ static int cpm_uart_tx_pump(struct uart_port *port) if (xmit->head == xmit->tail) break; } - bdp->cbd_datlen = count; - bdp->cbd_sc |= BD_SC_READY; - eieio(); + out_be16(&bdp->cbd_datlen, count); + setbits16(&bdp->cbd_sc, BD_SC_READY); /* Get next BD. */ - if (bdp->cbd_sc & BD_SC_WRAP) + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) bdp = pinfo->tx_bd_base; else bdp++; @@ -705,7 +709,7 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo) { int i; u8 *mem_addr; - volatile cbd_t *bdp; + cbd_t __iomem *bdp; pr_debug("CPM uart[%d]:initbd\n", pinfo->port.line); @@ -716,13 +720,13 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo) mem_addr = pinfo->mem_addr; bdp = pinfo->rx_cur = pinfo->rx_bd_base; for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) { - bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo); - bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT; + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT); mem_addr += pinfo->rx_fifosize; } - bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo); - bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT; + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT); /* Set the physical address of the host memory * buffers in the buffer descriptors, and the @@ -731,20 +735,19 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo) mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize); bdp = pinfo->tx_cur = pinfo->tx_bd_base; for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) { - bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo); - bdp->cbd_sc = BD_SC_INTRPT; + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_INTRPT); mem_addr += pinfo->tx_fifosize; } - bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo); - bdp->cbd_sc = BD_SC_WRAP | BD_SC_INTRPT; + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_INTRPT); } static void cpm_uart_init_scc(struct uart_cpm_port *pinfo) { - int line = pinfo - cpm_uart_ports; - volatile scc_t *scp; - volatile scc_uart_t *sup; + scc_t __iomem *scp; + scc_uart_t __iomem *sup; pr_debug("CPM uart[%d]:init_scc\n", pinfo->port.line); @@ -752,8 +755,10 @@ static void cpm_uart_init_scc(struct uart_cpm_port *pinfo) sup = pinfo->sccup; /* Store address */ - pinfo->sccup->scc_genscc.scc_rbase = (unsigned char *)pinfo->rx_bd_base - DPRAM_BASE; - pinfo->sccup->scc_genscc.scc_tbase = (unsigned char *)pinfo->tx_bd_base - DPRAM_BASE; + out_be16(&pinfo->sccup->scc_genscc.scc_rbase, + (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE); + out_be16(&pinfo->sccup->scc_genscc.scc_tbase, + (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); /* Set up the uart parameters in the * parameter ram. @@ -761,51 +766,50 @@ static void cpm_uart_init_scc(struct uart_cpm_port *pinfo) cpm_set_scc_fcr(sup); - sup->scc_genscc.scc_mrblr = pinfo->rx_fifosize; - sup->scc_maxidl = pinfo->rx_fifosize; - sup->scc_brkcr = 1; - sup->scc_parec = 0; - sup->scc_frmec = 0; - sup->scc_nosec = 0; - sup->scc_brkec = 0; - sup->scc_uaddr1 = 0; - sup->scc_uaddr2 = 0; - sup->scc_toseq = 0; - sup->scc_char1 = 0x8000; - sup->scc_char2 = 0x8000; - sup->scc_char3 = 0x8000; - sup->scc_char4 = 0x8000; - sup->scc_char5 = 0x8000; - sup->scc_char6 = 0x8000; - sup->scc_char7 = 0x8000; - sup->scc_char8 = 0x8000; - sup->scc_rccm = 0xc0ff; + out_be16(&sup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); + out_be16(&sup->scc_maxidl, pinfo->rx_fifosize); + out_be16(&sup->scc_brkcr, 1); + out_be16(&sup->scc_parec, 0); + out_be16(&sup->scc_frmec, 0); + out_be16(&sup->scc_nosec, 0); + out_be16(&sup->scc_brkec, 0); + out_be16(&sup->scc_uaddr1, 0); + out_be16(&sup->scc_uaddr2, 0); + out_be16(&sup->scc_toseq, 0); + out_be16(&sup->scc_char1, 0x8000); + out_be16(&sup->scc_char2, 0x8000); + out_be16(&sup->scc_char3, 0x8000); + out_be16(&sup->scc_char4, 0x8000); + out_be16(&sup->scc_char5, 0x8000); + out_be16(&sup->scc_char6, 0x8000); + out_be16(&sup->scc_char7, 0x8000); + out_be16(&sup->scc_char8, 0x8000); + out_be16(&sup->scc_rccm, 0xc0ff); /* Send the CPM an initialize command. */ - cpm_line_cr_cmd(line, CPM_CR_INIT_TRX); + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); /* Set UART mode, 8 bit, no parity, one stop. * Enable receive and transmit. */ - scp->scc_gsmrh = 0; - scp->scc_gsmrl = - (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); + out_be32(&scp->scc_gsmrh, 0); + out_be32(&scp->scc_gsmrl, + SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); /* Enable rx interrupts and clear all pending events. */ - scp->scc_sccm = 0; - scp->scc_scce = 0xffff; - scp->scc_dsr = 0x7e7e; - scp->scc_psmr = 0x3000; + out_be16(&scp->scc_sccm, 0); + out_be16(&scp->scc_scce, 0xffff); + out_be16(&scp->scc_dsr, 0x7e7e); + out_be16(&scp->scc_psmr, 0x3000); - scp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); + setbits32(&scp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); } static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) { - int line = pinfo - cpm_uart_ports; - volatile smc_t *sp; - volatile smc_uart_t *up; + smc_t __iomem *sp; + smc_uart_t __iomem *up; pr_debug("CPM uart[%d]:init_smc\n", pinfo->port.line); @@ -813,19 +817,21 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) up = pinfo->smcup; /* Store address */ - pinfo->smcup->smc_rbase = (u_char *)pinfo->rx_bd_base - DPRAM_BASE; - pinfo->smcup->smc_tbase = (u_char *)pinfo->tx_bd_base - DPRAM_BASE; + out_be16(&pinfo->smcup->smc_rbase, + (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE); + out_be16(&pinfo->smcup->smc_tbase, + (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); /* * In case SMC1 is being relocated... */ #if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH) - up->smc_rbptr = pinfo->smcup->smc_rbase; - up->smc_tbptr = pinfo->smcup->smc_tbase; - up->smc_rstate = 0; - up->smc_tstate = 0; - up->smc_brkcr = 1; /* number of break chars */ - up->smc_brkec = 0; + out_be16(&up->smc_rbptr, in_be16(&pinfo->smcup->smc_rbase)); + out_be16(&up->smc_tbptr, in_be16(&pinfo->smcup->smc_tbase)); + out_be32(&up->smc_rstate, 0); + out_be32(&up->smc_tstate, 0); + out_be16(&up->smc_brkcr, 1); /* number of break chars */ + out_be16(&up->smc_brkec, 0); #endif /* Set up the uart parameters in the @@ -834,24 +840,24 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) cpm_set_smc_fcr(up); /* Using idle charater time requires some additional tuning. */ - up->smc_mrblr = pinfo->rx_fifosize; - up->smc_maxidl = pinfo->rx_fifosize; - up->smc_brklen = 0; - up->smc_brkec = 0; - up->smc_brkcr = 1; + out_be16(&up->smc_mrblr, pinfo->rx_fifosize); + out_be16(&up->smc_maxidl, pinfo->rx_fifosize); + out_be16(&up->smc_brklen, 0); + out_be16(&up->smc_brkec, 0); + out_be16(&up->smc_brkcr, 1); - cpm_line_cr_cmd(line, CPM_CR_INIT_TRX); + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); /* Set UART mode, 8 bit, no parity, one stop. * Enable receive and transmit. */ - sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; + out_be16(&sp->smc_smcmr, smcr_mk_clen(9) | SMCMR_SM_UART); /* Enable only rx interrupts clear all pending events. */ - sp->smc_smcm = 0; - sp->smc_smce = 0xff; + out_8(&sp->smc_smcm, 0); + out_8(&sp->smc_smce, 0xff); - sp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN); + setbits16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN); } /* @@ -869,11 +875,11 @@ static int cpm_uart_request_port(struct uart_port *port) return 0; if (IS_SMC(pinfo)) { - pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX); - pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); + clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); } else { - pinfo->sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); - pinfo->sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); } ret = cpm_uart_allocbuf(pinfo, 0); @@ -929,6 +935,86 @@ static struct uart_ops cpm_uart_pops = { .verify_port = cpm_uart_verify_port, }; +#ifdef CONFIG_PPC_CPM_NEW_BINDING +struct uart_cpm_port cpm_uart_ports[UART_NR]; + +static int cpm_uart_init_port(struct device_node *np, + struct uart_cpm_port *pinfo) +{ + const u32 *data; + void __iomem *mem, *pram; + int len; + int ret; + + data = of_get_property(np, "fsl,cpm-brg", &len); + if (!data || len != 4) { + printk(KERN_ERR "CPM UART %s has no/invalid " + "fsl,cpm-brg property.\n", np->name); + return -EINVAL; + } + pinfo->brg = *data; + + data = of_get_property(np, "fsl,cpm-command", &len); + if (!data || len != 4) { + printk(KERN_ERR "CPM UART %s has no/invalid " + "fsl,cpm-command property.\n", np->name); + return -EINVAL; + } + pinfo->command = *data; + + mem = of_iomap(np, 0); + if (!mem) + return -ENOMEM; + + pram = of_iomap(np, 1); + if (!pram) { + ret = -ENOMEM; + goto out_mem; + } + + if (of_device_is_compatible(np, "fsl,cpm1-scc-uart") || + of_device_is_compatible(np, "fsl,cpm2-scc-uart")) { + pinfo->sccp = mem; + pinfo->sccup = pram; + } else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") || + of_device_is_compatible(np, "fsl,cpm2-smc-uart")) { + pinfo->flags |= FLAG_SMC; + pinfo->smcp = mem; + pinfo->smcup = pram; + } else { + ret = -ENODEV; + goto out_pram; + } + + pinfo->tx_nrfifos = TX_NUM_FIFO; + pinfo->tx_fifosize = TX_BUF_SIZE; + pinfo->rx_nrfifos = RX_NUM_FIFO; + pinfo->rx_fifosize = RX_BUF_SIZE; + + pinfo->port.uartclk = ppc_proc_freq; + pinfo->port.mapbase = (unsigned long)mem; + pinfo->port.type = PORT_CPM; + pinfo->port.ops = &cpm_uart_pops, + pinfo->port.iotype = UPIO_MEM; + spin_lock_init(&pinfo->port.lock); + + pinfo->port.irq = of_irq_to_resource(np, 0, NULL); + if (pinfo->port.irq == NO_IRQ) { + ret = -EINVAL; + goto out_pram; + } + + return cpm_uart_request_port(&pinfo->port); + +out_pram: + iounmap(pram); +out_mem: + iounmap(mem); + return ret; +} + +#else + struct uart_cpm_port cpm_uart_ports[UART_NR] = { [UART_SMC1] = { .port = { @@ -1072,6 +1158,7 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con) return 0; } +#endif #ifdef CONFIG_SERIAL_CPM_CONSOLE /* @@ -1083,11 +1170,15 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con) static void cpm_uart_console_write(struct console *co, const char *s, u_int count) { +#ifdef CONFIG_PPC_CPM_NEW_BINDING + struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index]; +#else struct uart_cpm_port *pinfo = &cpm_uart_ports[cpm_uart_port_map[co->index]]; +#endif unsigned int i; - volatile cbd_t *bdp, *bdbase; - volatile unsigned char *cp; + cbd_t __iomem *bdp, *bdbase; + unsigned char *cp; /* Get the address of the host memory buffer. */ @@ -1105,37 +1196,36 @@ static void cpm_uart_console_write(struct console *co, const char *s, * Ready indicates output is ready, and xmt is doing * that, not that it is ready for us to send. */ - while ((bdp->cbd_sc & BD_SC_READY) != 0) + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) ; /* Send the character out. * If the buffer address is in the CPM DPRAM, don't * convert it. */ - cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); - + cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); *cp = *s; - bdp->cbd_datlen = 1; - bdp->cbd_sc |= BD_SC_READY; + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); - if (bdp->cbd_sc & BD_SC_WRAP) + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) bdp = bdbase; else bdp++; /* if a LF, also do CR... */ if (*s == 10) { - while ((bdp->cbd_sc & BD_SC_READY) != 0) + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) ; - cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); - + cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); *cp = 13; - bdp->cbd_datlen = 1; - bdp->cbd_sc |= BD_SC_READY; - if (bdp->cbd_sc & BD_SC_WRAP) + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) bdp = bdbase; else bdp++; @@ -1146,22 +1236,56 @@ static void cpm_uart_console_write(struct console *co, const char *s, * Finally, Wait for transmitter & holding register to empty * and restore the IER */ - while ((bdp->cbd_sc & BD_SC_READY) != 0) + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) ; - pinfo->tx_cur = (volatile cbd_t *) bdp; + pinfo->tx_cur = bdp; } static int __init cpm_uart_console_setup(struct console *co, char *options) { - struct uart_port *port; - struct uart_cpm_port *pinfo; int baud = 38400; int bits = 8; int parity = 'n'; int flow = 'n'; int ret; + struct uart_cpm_port *pinfo; + struct uart_port *port; + +#ifdef CONFIG_PPC_CPM_NEW_BINDING + struct device_node *np = NULL; + int i = 0; + + if (co->index >= UART_NR) { + printk(KERN_ERR "cpm_uart: console index %d too high\n", + co->index); + return -ENODEV; + } + + do { + np = of_find_node_by_type(np, "serial"); + if (!np) + return -ENODEV; + + if (!of_device_is_compatible(np, "fsl,cpm1-smc-uart") && + !of_device_is_compatible(np, "fsl,cpm1-scc-uart") && + !of_device_is_compatible(np, "fsl,cpm2-smc-uart") && + !of_device_is_compatible(np, "fsl,cpm2-scc-uart")) + i--; + } while (i++ != co->index); + + pinfo = &cpm_uart_ports[co->index]; + + pinfo->flags |= FLAG_CONSOLE; + port = &pinfo->port; + + ret = cpm_uart_init_port(np, pinfo); + of_node_put(np); + if (ret) + return ret; + +#else struct fs_uart_platform_info *pdata; struct platform_device* pdev = early_uart_get_pdev(co->index); @@ -1188,6 +1312,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) } pinfo->flags |= FLAG_CONSOLE; +#endif if (options) { uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -1196,12 +1321,18 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) baud = 9600; } +#ifdef CONFIG_PPC_EARLY_DEBUG_CPM + udbg_putc = NULL; +#endif + + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); + if (IS_SMC(pinfo)) { - pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX); - pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); + clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); } else { - pinfo->sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); - pinfo->sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); } ret = cpm_uart_allocbuf(pinfo, 1); @@ -1217,6 +1348,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) cpm_uart_init_scc(pinfo); uart_set_options(port, co, baud, parity, bits, flow); + cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); return 0; } @@ -1232,7 +1364,7 @@ static struct console cpm_scc_uart_console = { .data = &cpm_reg, }; -int __init cpm_uart_console_init(void) +static int __init cpm_uart_console_init(void) { register_console(&cpm_scc_uart_console); return 0; @@ -1252,7 +1384,81 @@ static struct uart_driver cpm_reg = { .major = SERIAL_CPM_MAJOR, .minor = SERIAL_CPM_MINOR, .cons = CPM_UART_CONSOLE, + .nr = UART_NR, }; + +#ifdef CONFIG_PPC_CPM_NEW_BINDING +static int probe_index; + +static int __devinit cpm_uart_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + int index = probe_index++; + struct uart_cpm_port *pinfo = &cpm_uart_ports[index]; + int ret; + + pinfo->port.line = index; + + if (index >= UART_NR) + return -ENODEV; + + dev_set_drvdata(&ofdev->dev, pinfo); + + ret = cpm_uart_init_port(ofdev->node, pinfo); + if (ret) + return ret; + + return uart_add_one_port(&cpm_reg, &pinfo->port); +} + +static int __devexit cpm_uart_remove(struct of_device *ofdev) +{ + struct uart_cpm_port *pinfo = dev_get_drvdata(&ofdev->dev); + return uart_remove_one_port(&cpm_reg, &pinfo->port); +} + +static struct of_device_id cpm_uart_match[] = { + { + .compatible = "fsl,cpm1-smc-uart", + }, + { + .compatible = "fsl,cpm1-scc-uart", + }, + { + .compatible = "fsl,cpm2-smc-uart", + }, + { + .compatible = "fsl,cpm2-scc-uart", + }, + {} +}; + +static struct of_platform_driver cpm_uart_driver = { + .name = "cpm_uart", + .match_table = cpm_uart_match, + .probe = cpm_uart_probe, + .remove = cpm_uart_remove, + }; + +static int __init cpm_uart_init(void) +{ + int ret = uart_register_driver(&cpm_reg); + if (ret) + return ret; + + ret = of_register_platform_driver(&cpm_uart_driver); + if (ret) + uart_unregister_driver(&cpm_reg); + + return ret; +} + +static void __exit cpm_uart_exit(void) +{ + of_unregister_platform_driver(&cpm_uart_driver); + uart_unregister_driver(&cpm_reg); +} +#else static int cpm_uart_drv_probe(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -1380,6 +1586,7 @@ static void __exit cpm_uart_exit(void) driver_unregister(&cpm_smc_uart_driver); uart_unregister_driver(&cpm_reg); } +#endif module_init(cpm_uart_init); module_exit(cpm_uart_exit); diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index 8c6324ed0202..52fb044bb79a 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -49,9 +49,20 @@ /**************************************************************/ -void cpm_line_cr_cmd(int line, int cmd) +#ifdef CONFIG_PPC_CPM_NEW_BINDING +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) +{ + u16 __iomem *cpcr = &cpmp->cp_cpcr; + + out_be16(cpcr, port->command | (cmd << 8) | CPM_CR_FLG); + while (in_be16(cpcr) & CPM_CR_FLG) + ; +} +#else +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) { ushort val; + int line = port - cpm_uart_ports; volatile cpm8xx_t *cp = cpmp; switch (line) { @@ -114,6 +125,7 @@ void scc4_lineif(struct uart_cpm_port *pinfo) /* XXX SCC4: insert port configuration here */ pinfo->brg = 4; } +#endif /* * Allocate DP-Ram and memory buffers. We need to allocate a transmit and @@ -167,7 +179,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize); - pinfo->rx_bd_base = (volatile cbd_t *)dp_mem; + pinfo->rx_bd_base = (cbd_t __iomem __force *)dp_mem; pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; return 0; @@ -184,6 +196,7 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo) cpm_dpfree(pinfo->dp_addr); } +#ifndef CONFIG_PPC_CPM_NEW_BINDING /* Setup any dynamic params in the uart desc */ int cpm_uart_init_portdesc(void) { @@ -279,3 +292,4 @@ int cpm_uart_init_portdesc(void) #endif return 0; } +#endif diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h index 2a6477834c3e..9b5465fb0bbb 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.h +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.h @@ -13,30 +13,32 @@ #include <asm/commproc.h> /* defines for IRQs */ +#ifndef CONFIG_PPC_CPM_NEW_BINDING #define SMC1_IRQ (CPM_IRQ_OFFSET + CPMVEC_SMC1) #define SMC2_IRQ (CPM_IRQ_OFFSET + CPMVEC_SMC2) #define SCC1_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC1) #define SCC2_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC2) #define SCC3_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC3) #define SCC4_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC4) +#endif static inline void cpm_set_brg(int brg, int baud) { cpm_setbrg(brg, baud); } -static inline void cpm_set_scc_fcr(volatile scc_uart_t * sup) +static inline void cpm_set_scc_fcr(scc_uart_t __iomem * sup) { - sup->scc_genscc.scc_rfcr = SMC_EB; - sup->scc_genscc.scc_tfcr = SMC_EB; + out_8(&sup->scc_genscc.scc_rfcr, SMC_EB); + out_8(&sup->scc_genscc.scc_tfcr, SMC_EB); } -static inline void cpm_set_smc_fcr(volatile smc_uart_t * up) +static inline void cpm_set_smc_fcr(smc_uart_t __iomem * up) { - up->smc_rfcr = SMC_EB; - up->smc_tfcr = SMC_EB; + out_8(&up->smc_rfcr, SMC_EB); + out_8(&up->smc_tfcr, SMC_EB); } -#define DPRAM_BASE ((unsigned char *)cpm_dpram_addr(0)) +#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0)) #endif diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index 7b61d805ebe9..882dbc17d590 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -49,9 +49,22 @@ /**************************************************************/ -void cpm_line_cr_cmd(int line, int cmd) +#ifdef CONFIG_PPC_CPM_NEW_BINDING +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) +{ + cpm_cpm2_t __iomem *cp = cpm2_map(im_cpm); + + out_be32(&cp->cp_cpcr, port->command | cmd | CPM_CR_FLG); + while (in_be32(&cp->cp_cpcr) & CPM_CR_FLG) + ; + + cpm2_unmap(cp); +} +#else +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) { ulong val; + int line = port - cpm_uart_ports; volatile cpm_cpm2_t *cp = cpm2_map(im_cpm); @@ -211,6 +224,7 @@ void scc4_lineif(struct uart_cpm_port *pinfo) cpm2_unmap(cpmux); cpm2_unmap(io); } +#endif /* * Allocate DP-Ram and memory buffers. We need to allocate a transmit and @@ -221,7 +235,7 @@ void scc4_lineif(struct uart_cpm_port *pinfo) int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) { int dpmemsz, memsz; - u8 *dp_mem; + u8 __iomem *dp_mem; unsigned long dp_offset; u8 *mem_addr; dma_addr_t dma_addr = 0; @@ -264,7 +278,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize); - pinfo->rx_bd_base = (volatile cbd_t *)dp_mem; + pinfo->rx_bd_base = (cbd_t __iomem *)dp_mem; pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; return 0; @@ -275,12 +289,13 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo) dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + L1_CACHE_ALIGN(pinfo->tx_nrfifos * - pinfo->tx_fifosize), pinfo->mem_addr, + pinfo->tx_fifosize), (void __force *)pinfo->mem_addr, pinfo->dma_addr); cpm_dpfree(pinfo->dp_addr); } +#ifndef CONFIG_PPC_CPM_NEW_BINDING /* Setup any dynamic params in the uart desc */ int cpm_uart_init_portdesc(void) { @@ -386,3 +401,4 @@ int cpm_uart_init_portdesc(void) return 0; } +#endif diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h index 1b3219f56c81..40006a7dce46 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.h +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.h @@ -13,30 +13,32 @@ #include <asm/cpm2.h> /* defines for IRQs */ +#ifndef CONFIG_PPC_CPM_NEW_BINDING #define SMC1_IRQ SIU_INT_SMC1 #define SMC2_IRQ SIU_INT_SMC2 #define SCC1_IRQ SIU_INT_SCC1 #define SCC2_IRQ SIU_INT_SCC2 #define SCC3_IRQ SIU_INT_SCC3 #define SCC4_IRQ SIU_INT_SCC4 +#endif static inline void cpm_set_brg(int brg, int baud) { cpm_setbrg(brg, baud); } -static inline void cpm_set_scc_fcr(volatile scc_uart_t * sup) +static inline void cpm_set_scc_fcr(scc_uart_t __iomem *sup) { - sup->scc_genscc.scc_rfcr = CPMFCR_GBL | CPMFCR_EB; - sup->scc_genscc.scc_tfcr = CPMFCR_GBL | CPMFCR_EB; + out_8(&sup->scc_genscc.scc_rfcr, CPMFCR_GBL | CPMFCR_EB); + out_8(&sup->scc_genscc.scc_tfcr, CPMFCR_GBL | CPMFCR_EB); } -static inline void cpm_set_smc_fcr(volatile smc_uart_t * up) +static inline void cpm_set_smc_fcr(smc_uart_t __iomem *up) { - up->smc_rfcr = CPMFCR_GBL | CPMFCR_EB; - up->smc_tfcr = CPMFCR_GBL | CPMFCR_EB; + out_8(&up->smc_rfcr, CPMFCR_GBL | CPMFCR_EB); + out_8(&up->smc_tfcr, CPMFCR_GBL | CPMFCR_EB); } -#define DPRAM_BASE ((unsigned char *)cpm_dpram_addr(0)) +#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0)) #endif diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 35f8b86cc78f..035cca028199 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -1051,7 +1051,7 @@ mpc52xx_uart_of_assign(struct device_node *np, int idx) /* If the slot is already occupied, then swap slots */ if (mpc52xx_uart_nodes[idx] && (free_idx != -1)) mpc52xx_uart_nodes[free_idx] = mpc52xx_uart_nodes[idx]; - mpc52xx_uart_nodes[i] = np; + mpc52xx_uart_nodes[idx] = np; } static void diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 0fa9f6761763..794bd0f50d73 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -88,6 +88,16 @@ MODULE_LICENSE("GPL"); #define PWRDBG(fmt, arg...) printk(KERN_DEBUG fmt , ## arg) +#ifdef CONFIG_SERIAL_PMACZILOG_TTYS +#define PMACZILOG_MAJOR TTY_MAJOR +#define PMACZILOG_MINOR 64 +#define PMACZILOG_NAME "ttyS" +#else +#define PMACZILOG_MAJOR 204 +#define PMACZILOG_MINOR 192 +#define PMACZILOG_NAME "ttyPZ" +#endif + /* * For the sake of early serial console, we can do a pre-probe @@ -99,9 +109,10 @@ static DEFINE_MUTEX(pmz_irq_mutex); static struct uart_driver pmz_uart_reg = { .owner = THIS_MODULE, - .driver_name = "ttyS", - .dev_name = "ttyS", - .major = TTY_MAJOR, + .driver_name = PMACZILOG_NAME, + .dev_name = PMACZILOG_NAME, + .major = PMACZILOG_MAJOR, + .minor = PMACZILOG_MINOR, }; @@ -1587,7 +1598,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state) if (pm_state.event == mdev->ofdev.dev.power.power_state.event) return 0; - pmz_debug("suspend, switching to state %d\n", pm_state); + pmz_debug("suspend, switching to state %d\n", pm_state.event); state = pmz_uart_reg.state + uap->port.line; @@ -1778,7 +1789,7 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c static int __init pmz_console_setup(struct console *co, char *options); static struct console pmz_console = { - .name = "ttyS", + .name = PMACZILOG_NAME, .write = pmz_console_write, .device = uart_console_device, .setup = pmz_console_setup, @@ -1802,7 +1813,6 @@ static int __init pmz_register(void) pmz_uart_reg.nr = pmz_ports_count; pmz_uart_reg.cons = PMACZILOG_CONSOLE; - pmz_uart_reg.minor = 64; /* * Register this driver with the serial core diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index f5051cf1a0c8..dfef83f14960 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -1,7 +1,8 @@ /* * uartlite.c: Serial driver for Xilinx uartlite serial controller * - * Peter Korsgaard <jacmet@sunsite.dk> + * Copyright (C) 2006 Peter Korsgaard <jacmet@sunsite.dk> + * Copyright (C) 2007 Secret Lab Technologies Ltd. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -17,14 +18,23 @@ #include <linux/delay.h> #include <linux/interrupt.h> #include <asm/io.h> +#if defined(CONFIG_OF) +#include <linux/of_device.h> +#include <linux/of_platform.h> +#endif +#define ULITE_NAME "ttyUL" #define ULITE_MAJOR 204 #define ULITE_MINOR 187 #define ULITE_NR_UARTS 4 -/* For register details see datasheet: - http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf -*/ +/* --------------------------------------------------------------------- + * Register definitions + * + * For register details see datasheet: + * http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf + */ + #define ULITE_RX 0x00 #define ULITE_TX 0x04 #define ULITE_STATUS 0x08 @@ -46,7 +56,11 @@ #define ULITE_CONTROL_IE 0x10 -static struct uart_port ports[ULITE_NR_UARTS]; +static struct uart_port ulite_ports[ULITE_NR_UARTS]; + +/* --------------------------------------------------------------------- + * Core UART driver operations + */ static int ulite_receive(struct uart_port *port, int stat) { @@ -307,6 +321,10 @@ static struct uart_ops ulite_ops = { .verify_port = ulite_verify_port }; +/* --------------------------------------------------------------------- + * Console driver operations + */ + #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE static void ulite_console_wait_tx(struct uart_port *port) { @@ -329,7 +347,7 @@ static void ulite_console_putchar(struct uart_port *port, int ch) static void ulite_console_write(struct console *co, const char *s, unsigned int count) { - struct uart_port *port = &ports[co->index]; + struct uart_port *port = &ulite_ports[co->index]; unsigned long flags; unsigned int ier; int locked = 1; @@ -355,6 +373,31 @@ static void ulite_console_write(struct console *co, const char *s, spin_unlock_irqrestore(&port->lock, flags); } +#if defined(CONFIG_OF) +static inline void __init ulite_console_of_find_device(int id) +{ + struct device_node *np; + struct resource res; + const unsigned int *of_id; + int rc; + + for_each_compatible_node(np, NULL, "xilinx,uartlite") { + of_id = of_get_property(np, "port-number", NULL); + if ((!of_id) || (*of_id != id)) + continue; + + rc = of_address_to_resource(np, 0, &res); + if (rc) + continue; + + ulite_ports[id].mapbase = res.start; + return; + } +} +#else /* CONFIG_OF */ +static inline void __init ulite_console_of_find_device(int id) { /* do nothing */ } +#endif /* CONFIG_OF */ + static int __init ulite_console_setup(struct console *co, char *options) { struct uart_port *port; @@ -366,11 +409,23 @@ static int __init ulite_console_setup(struct console *co, char *options) if (co->index < 0 || co->index >= ULITE_NR_UARTS) return -EINVAL; - port = &ports[co->index]; + port = &ulite_ports[co->index]; - /* not initialized yet? */ - if (!port->membase) + /* Check if it is an OF device */ + if (!port->mapbase) + ulite_console_of_find_device(co->index); + + /* Do we have a device now? */ + if (!port->mapbase) { + pr_debug("console on ttyUL%i not present\n", co->index); return -ENODEV; + } + + /* not initialized yet? */ + if (!port->membase) { + if (ulite_request_port(port)) + return -ENODEV; + } if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -381,7 +436,7 @@ static int __init ulite_console_setup(struct console *co, char *options) static struct uart_driver ulite_uart_driver; static struct console ulite_console = { - .name = "ttyUL", + .name = ULITE_NAME, .write = ulite_console_write, .device = uart_console_device, .setup = ulite_console_setup, @@ -403,7 +458,7 @@ console_initcall(ulite_console_init); static struct uart_driver ulite_uart_driver = { .owner = THIS_MODULE, .driver_name = "uartlite", - .dev_name = "ttyUL", + .dev_name = ULITE_NAME, .major = ULITE_MAJOR, .minor = ULITE_MINOR, .nr = ULITE_NR_UARTS, @@ -412,59 +467,111 @@ static struct uart_driver ulite_uart_driver = { #endif }; -static int __devinit ulite_probe(struct platform_device *pdev) +/* --------------------------------------------------------------------- + * Port assignment functions (mapping devices to uart_port structures) + */ + +/** ulite_assign: register a uartlite device with the driver + * + * @dev: pointer to device structure + * @id: requested id number. Pass -1 for automatic port assignment + * @base: base address of uartlite registers + * @irq: irq number for uartlite + * + * Returns: 0 on success, <0 otherwise + */ +static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq) { - struct resource *res, *res2; struct uart_port *port; + int rc; - if (pdev->id < 0 || pdev->id >= ULITE_NR_UARTS) + /* if id = -1; then scan for a free id and use that */ + if (id < 0) { + for (id = 0; id < ULITE_NR_UARTS; id++) + if (ulite_ports[id].mapbase == 0) + break; + } + if (id < 0 || id >= ULITE_NR_UARTS) { + dev_err(dev, "%s%i too large\n", ULITE_NAME, id); return -EINVAL; + } - if (ports[pdev->id].membase) + if ((ulite_ports[id].mapbase) && (ulite_ports[id].mapbase != base)) { + dev_err(dev, "cannot assign to %s%i; it is already in use\n", + ULITE_NAME, id); return -EBUSY; + } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; + port = &ulite_ports[id]; - res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res2) - return -ENODEV; + spin_lock_init(&port->lock); + port->fifosize = 16; + port->regshift = 2; + port->iotype = UPIO_MEM; + port->iobase = 1; /* mark port in use */ + port->mapbase = base; + port->membase = NULL; + port->ops = &ulite_ops; + port->irq = irq; + port->flags = UPF_BOOT_AUTOCONF; + port->dev = dev; + port->type = PORT_UNKNOWN; + port->line = id; + + dev_set_drvdata(dev, port); + + /* Register the port */ + rc = uart_add_one_port(&ulite_uart_driver, port); + if (rc) { + dev_err(dev, "uart_add_one_port() failed; err=%i\n", rc); + port->mapbase = 0; + dev_set_drvdata(dev, NULL); + return rc; + } - port = &ports[pdev->id]; + return 0; +} - port->fifosize = 16; - port->regshift = 2; - port->iotype = UPIO_MEM; - port->iobase = 1; /* mark port in use */ - port->mapbase = res->start; - port->membase = NULL; - port->ops = &ulite_ops; - port->irq = res2->start; - port->flags = UPF_BOOT_AUTOCONF; - port->dev = &pdev->dev; - port->type = PORT_UNKNOWN; - port->line = pdev->id; +/** ulite_release: register a uartlite device with the driver + * + * @dev: pointer to device structure + */ +static int __devinit ulite_release(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + int rc = 0; - uart_add_one_port(&ulite_uart_driver, port); - platform_set_drvdata(pdev, port); + if (port) { + rc = uart_remove_one_port(&ulite_uart_driver, port); + dev_set_drvdata(dev, NULL); + port->mapbase = 0; + } - return 0; + return rc; } -static int ulite_remove(struct platform_device *pdev) +/* --------------------------------------------------------------------- + * Platform bus binding + */ + +static int __devinit ulite_probe(struct platform_device *pdev) { - struct uart_port *port = platform_get_drvdata(pdev); + struct resource *res, *res2; - platform_set_drvdata(pdev, NULL); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; - if (port) - uart_remove_one_port(&ulite_uart_driver, port); + res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res2) + return -ENODEV; - /* mark port as free */ - port->membase = NULL; + return ulite_assign(&pdev->dev, pdev->id, res->start, res2->start); +} - return 0; +static int ulite_remove(struct platform_device *pdev) +{ + return ulite_release(&pdev->dev); } static struct platform_driver ulite_platform_driver = { @@ -476,24 +583,109 @@ static struct platform_driver ulite_platform_driver = { }, }; +/* --------------------------------------------------------------------- + * OF bus bindings + */ +#if defined(CONFIG_OF) +static int __devinit +ulite_of_probe(struct of_device *op, const struct of_device_id *match) +{ + struct resource res; + const unsigned int *id; + int irq, rc; + + dev_dbg(&op->dev, "%s(%p, %p)\n", __FUNCTION__, op, match); + + rc = of_address_to_resource(op->node, 0, &res); + if (rc) { + dev_err(&op->dev, "invalid address\n"); + return rc; + } + + irq = irq_of_parse_and_map(op->node, 0); + + id = of_get_property(op->node, "port-number", NULL); + + return ulite_assign(&op->dev, id ? *id : -1, res.start+3, irq); +} + +static int __devexit ulite_of_remove(struct of_device *op) +{ + return ulite_release(&op->dev); +} + +/* Match table for of_platform binding */ +static struct of_device_id __devinit ulite_of_match[] = { + { .type = "serial", .compatible = "xilinx,uartlite", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ulite_of_match); + +static struct of_platform_driver ulite_of_driver = { + .owner = THIS_MODULE, + .name = "uartlite", + .match_table = ulite_of_match, + .probe = ulite_of_probe, + .remove = __devexit_p(ulite_of_remove), + .driver = { + .name = "uartlite", + }, +}; + +/* Registration helpers to keep the number of #ifdefs to a minimum */ +static inline int __init ulite_of_register(void) +{ + pr_debug("uartlite: calling of_register_platform_driver()\n"); + return of_register_platform_driver(&ulite_of_driver); +} + +static inline void __exit ulite_of_unregister(void) +{ + of_unregister_platform_driver(&ulite_of_driver); +} +#else /* CONFIG_OF */ +/* CONFIG_OF not enabled; do nothing helpers */ +static inline int __init ulite_of_register(void) { return 0; } +static inline void __exit ulite_of_unregister(void) { } +#endif /* CONFIG_OF */ + +/* --------------------------------------------------------------------- + * Module setup/teardown + */ + int __init ulite_init(void) { int ret; + pr_debug("uartlite: calling uart_register_driver()\n"); ret = uart_register_driver(&ulite_uart_driver); if (ret) - return ret; + goto err_uart; + ret = ulite_of_register(); + if (ret) + goto err_of; + + pr_debug("uartlite: calling platform_driver_register()\n"); ret = platform_driver_register(&ulite_platform_driver); if (ret) - uart_unregister_driver(&ulite_uart_driver); + goto err_plat; + return 0; + +err_plat: + ulite_of_unregister(); +err_of: + uart_unregister_driver(&ulite_uart_driver); +err_uart: + printk(KERN_ERR "registering uartlite driver failed: err=%i", ret); return ret; } void __exit ulite_exit(void) { platform_driver_unregister(&ulite_platform_driver); + ulite_of_unregister(); uart_unregister_driver(&ulite_uart_driver); } |