diff options
Diffstat (limited to 'drivers/soc/bcm/brcmstb/pm/pm.h')
| -rw-r--r-- | drivers/soc/bcm/brcmstb/pm/pm.h | 89 |
1 files changed, 89 insertions, 0 deletions
diff --git a/drivers/soc/bcm/brcmstb/pm/pm.h b/drivers/soc/bcm/brcmstb/pm/pm.h new file mode 100644 index 000000000000..b7d35ac70e60 --- /dev/null +++ b/drivers/soc/bcm/brcmstb/pm/pm.h @@ -0,0 +1,89 @@ +/* + * Definitions for Broadcom STB power management / Always ON (AON) block + * + * Copyright © 2016-2017 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __BRCMSTB_PM_H__ +#define __BRCMSTB_PM_H__ + +#define AON_CTRL_RESET_CTRL 0x00 +#define AON_CTRL_PM_CTRL 0x04 +#define AON_CTRL_PM_STATUS 0x08 +#define AON_CTRL_PM_CPU_WAIT_COUNT 0x10 +#define AON_CTRL_PM_INITIATE 0x88 +#define AON_CTRL_HOST_MISC_CMDS 0x8c +#define AON_CTRL_SYSTEM_DATA_RAM_OFS 0x200 + +/* MIPS PM constants */ +/* MEMC0 offsets */ +#define DDR40_PHY_CONTROL_REGS_0_PLL_STATUS 0x10 +#define DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL 0xa4 + +/* TIMER offsets */ +#define TIMER_TIMER1_CTRL 0x0c +#define TIMER_TIMER1_STAT 0x1c + +/* TIMER defines */ +#define RESET_TIMER 0x0 +#define START_TIMER 0xbfffffff +#define TIMER_MASK 0x3fffffff + +/* PM_CTRL bitfield (Method #0) */ +#define PM_FAST_PWRDOWN (1 << 6) +#define PM_WARM_BOOT (1 << 5) +#define PM_DEEP_STANDBY (1 << 4) +#define PM_CPU_PWR (1 << 3) +#define PM_USE_CPU_RDY (1 << 2) +#define PM_PLL_PWRDOWN (1 << 1) +#define PM_PWR_DOWN (1 << 0) + +/* PM_CTRL bitfield (Method #1) */ +#define PM_DPHY_STANDBY_CLEAR (1 << 20) +#define PM_MIN_S3_WIDTH_TIMER_BYPASS (1 << 7) + +#define PM_S2_COMMAND (PM_PLL_PWRDOWN | PM_USE_CPU_RDY | PM_PWR_DOWN) + +/* Method 0 bitmasks */ +#define PM_COLD_CONFIG (PM_PLL_PWRDOWN | PM_DEEP_STANDBY) +#define PM_WARM_CONFIG (PM_COLD_CONFIG | PM_USE_CPU_RDY | PM_WARM_BOOT) + +/* Method 1 bitmask */ +#define M1_PM_WARM_CONFIG (PM_DPHY_STANDBY_CLEAR | \ + PM_MIN_S3_WIDTH_TIMER_BYPASS | \ + PM_WARM_BOOT | PM_DEEP_STANDBY | \ + PM_PLL_PWRDOWN | PM_PWR_DOWN) + +#define M1_PM_COLD_CONFIG (PM_DPHY_STANDBY_CLEAR | \ + PM_MIN_S3_WIDTH_TIMER_BYPASS | \ + PM_DEEP_STANDBY | \ + PM_PLL_PWRDOWN | PM_PWR_DOWN) + +#ifndef __ASSEMBLY__ + +#ifndef CONFIG_MIPS +extern const unsigned long brcmstb_pm_do_s2_sz; +extern asmlinkage int brcmstb_pm_do_s2(void __iomem *aon_ctrl_base, + void __iomem *ddr_phy_pll_status); +#else +/* s2 asm */ +extern asmlinkage int brcm_pm_do_s2(u32 *s2_params); + +/* s3 asm */ +extern asmlinkage int brcm_pm_do_s3(void __iomem *aon_ctrl_base, + int dcache_linesz); +extern int s3_reentry; +#endif /* CONFIG_MIPS */ + +#endif + +#endif /* __BRCMSTB_PM_H__ */ |