diff options
Diffstat (limited to 'drivers/ssb/driver_chipcommon_pmu.c')
| -rw-r--r-- | drivers/ssb/driver_chipcommon_pmu.c | 508 |
1 files changed, 508 insertions, 0 deletions
diff --git a/drivers/ssb/driver_chipcommon_pmu.c b/drivers/ssb/driver_chipcommon_pmu.c new file mode 100644 index 000000000000..4aaddeec55a2 --- /dev/null +++ b/drivers/ssb/driver_chipcommon_pmu.c @@ -0,0 +1,508 @@ +/* + * Sonics Silicon Backplane + * Broadcom ChipCommon Power Management Unit driver + * + * Copyright 2009, Michael Buesch <mb@bu3sch.de> + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include <linux/ssb/ssb.h> +#include <linux/ssb/ssb_regs.h> +#include <linux/ssb/ssb_driver_chipcommon.h> +#include <linux/delay.h> + +#include "ssb_private.h" + +static u32 ssb_chipco_pll_read(struct ssb_chipcommon *cc, u32 offset) +{ + chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset); + return chipco_read32(cc, SSB_CHIPCO_PLLCTL_DATA); +} + +static void ssb_chipco_pll_write(struct ssb_chipcommon *cc, + u32 offset, u32 value) +{ + chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset); + chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value); +} + +struct pmu0_plltab_entry { + u16 freq; /* Crystal frequency in kHz.*/ + u8 xf; /* Crystal frequency value for PMU control */ + u8 wb_int; + u32 wb_frac; +}; + +static const struct pmu0_plltab_entry pmu0_plltab[] = { + { .freq = 12000, .xf = 1, .wb_int = 73, .wb_frac = 349525, }, + { .freq = 13000, .xf = 2, .wb_int = 67, .wb_frac = 725937, }, + { .freq = 14400, .xf = 3, .wb_int = 61, .wb_frac = 116508, }, + { .freq = 15360, .xf = 4, .wb_int = 57, .wb_frac = 305834, }, + { .freq = 16200, .xf = 5, .wb_int = 54, .wb_frac = 336579, }, + { .freq = 16800, .xf = 6, .wb_int = 52, .wb_frac = 399457, }, + { .freq = 19200, .xf = 7, .wb_int = 45, .wb_frac = 873813, }, + { .freq = 19800, .xf = 8, .wb_int = 44, .wb_frac = 466033, }, + { .freq = 20000, .xf = 9, .wb_int = 44, .wb_frac = 0, }, + { .freq = 25000, .xf = 10, .wb_int = 70, .wb_frac = 419430, }, + { .freq = 26000, .xf = 11, .wb_int = 67, .wb_frac = 725937, }, + { .freq = 30000, .xf = 12, .wb_int = 58, .wb_frac = 699050, }, + { .freq = 38400, .xf = 13, .wb_int = 45, .wb_frac = 873813, }, + { .freq = 40000, .xf = 14, .wb_int = 45, .wb_frac = 0, }, +}; +#define SSB_PMU0_DEFAULT_XTALFREQ 20000 + +static const struct pmu0_plltab_entry * pmu0_plltab_find_entry(u32 crystalfreq) +{ + const struct pmu0_plltab_entry *e; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(pmu0_plltab); i++) { + e = &pmu0_plltab[i]; + if (e->freq == crystalfreq) + return e; + } + + return NULL; +} + +/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */ +static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc, + u32 crystalfreq) +{ + struct ssb_bus *bus = cc->dev->bus; + const struct pmu0_plltab_entry *e = NULL; + u32 pmuctl, tmp, pllctl; + unsigned int i; + + if ((bus->chip_id == 0x5354) && !crystalfreq) { + /* The 5354 crystal freq is 25MHz */ + crystalfreq = 25000; + } + if (crystalfreq) + e = pmu0_plltab_find_entry(crystalfreq); + if (!e) + e = pmu0_plltab_find_entry(SSB_PMU0_DEFAULT_XTALFREQ); + BUG_ON(!e); + crystalfreq = e->freq; + cc->pmu.crystalfreq = e->freq; + + /* Check if the PLL already is programmed to this frequency. */ + pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); + if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) { + /* We're already there... */ + return; + } + + ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n", + (crystalfreq / 1000), (crystalfreq % 1000)); + + /* First turn the PLL off. */ + switch (bus->chip_id) { + case 0x4328: + chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, + ~(1 << SSB_PMURES_4328_BB_PLL_PU)); + chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, + ~(1 << SSB_PMURES_4328_BB_PLL_PU)); + break; + case 0x5354: + chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, + ~(1 << SSB_PMURES_5354_BB_PLL_PU)); + chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, + ~(1 << SSB_PMURES_5354_BB_PLL_PU)); + break; + default: + SSB_WARN_ON(1); + } + for (i = 1500; i; i--) { + tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); + if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)) + break; + udelay(10); + } + tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); + if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT) + ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n"); + + /* Set PDIV in PLL control 0. */ + pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0); + if (crystalfreq >= SSB_PMU0_PLLCTL0_PDIV_FREQ) + pllctl |= SSB_PMU0_PLLCTL0_PDIV_MSK; + else + pllctl &= ~SSB_PMU0_PLLCTL0_PDIV_MSK; + ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL0, pllctl); + + /* Set WILD in PLL control 1. */ + pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL1); + pllctl &= ~SSB_PMU0_PLLCTL1_STOPMOD; + pllctl &= ~(SSB_PMU0_PLLCTL1_WILD_IMSK | SSB_PMU0_PLLCTL1_WILD_FMSK); + pllctl |= ((u32)e->wb_int << SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_IMSK; + pllctl |= ((u32)e->wb_frac << SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_FMSK; + if (e->wb_frac == 0) + pllctl |= SSB_PMU0_PLLCTL1_STOPMOD; + ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL1, pllctl); + + /* Set WILD in PLL control 2. */ + pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL2); + pllctl &= ~SSB_PMU0_PLLCTL2_WILD_IMSKHI; + pllctl |= (((u32)e->wb_int >> 4) << SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT) & SSB_PMU0_PLLCTL2_WILD_IMSKHI; + ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL2, pllctl); + + /* Set the crystalfrequency and the divisor. */ + pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); + pmuctl &= ~SSB_CHIPCO_PMU_CTL_ILP_DIV; + pmuctl |= (((crystalfreq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT) + & SSB_CHIPCO_PMU_CTL_ILP_DIV; + pmuctl &= ~SSB_CHIPCO_PMU_CTL_XTALFREQ; + pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ; + chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl); +} + +struct pmu1_plltab_entry { + u16 freq; /* Crystal frequency in kHz.*/ + u8 xf; /* Crystal frequency value for PMU control */ + u8 ndiv_int; + u32 ndiv_frac; + u8 p1div; + u8 p2div; +}; + +static const struct pmu1_plltab_entry pmu1_plltab[] = { + { .freq = 12000, .xf = 1, .p1div = 3, .p2div = 22, .ndiv_int = 0x9, .ndiv_frac = 0xFFFFEF, }, + { .freq = 13000, .xf = 2, .p1div = 1, .p2div = 6, .ndiv_int = 0xb, .ndiv_frac = 0x483483, }, + { .freq = 14400, .xf = 3, .p1div = 1, .p2div = 10, .ndiv_int = 0xa, .ndiv_frac = 0x1C71C7, }, + { .freq = 15360, .xf = 4, .p1div = 1, .p2div = 5, .ndiv_int = 0xb, .ndiv_frac = 0x755555, }, + { .freq = 16200, .xf = 5, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x6E9E06, }, + { .freq = 16800, .xf = 6, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x3CF3CF, }, + { .freq = 19200, .xf = 7, .p1div = 1, .p2div = 9, .ndiv_int = 0x5, .ndiv_frac = 0x17B425, }, + { .freq = 19800, .xf = 8, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0xA57EB, }, + { .freq = 20000, .xf = 9, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0, }, + { .freq = 24000, .xf = 10, .p1div = 3, .p2div = 11, .ndiv_int = 0xa, .ndiv_frac = 0, }, + { .freq = 25000, .xf = 11, .p1div = 5, .p2div = 16, .ndiv_int = 0xb, .ndiv_frac = 0, }, + { .freq = 26000, .xf = 12, .p1div = 1, .p2div = 2, .ndiv_int = 0x10, .ndiv_frac = 0xEC4EC4, }, + { .freq = 30000, .xf = 13, .p1div = 3, .p2div = 8, .ndiv_int = 0xb, .ndiv_frac = 0, }, + { .freq = 38400, .xf = 14, .p1div = 1, .p2div = 5, .ndiv_int = 0x4, .ndiv_frac = 0x955555, }, + { .freq = 40000, .xf = 15, .p1div = 1, .p2div = 2, .ndiv_int = 0xb, .ndiv_frac = 0, }, +}; + +#define SSB_PMU1_DEFAULT_XTALFREQ 15360 + +static const struct pmu1_plltab_entry * pmu1_plltab_find_entry(u32 crystalfreq) +{ + const struct pmu1_plltab_entry *e; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(pmu1_plltab); i++) { + e = &pmu1_plltab[i]; + if (e->freq == crystalfreq) + return e; + } + + return NULL; +} + +/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */ +static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc, + u32 crystalfreq) +{ + struct ssb_bus *bus = cc->dev->bus; + const struct pmu1_plltab_entry *e = NULL; + u32 buffer_strength = 0; + u32 tmp, pllctl, pmuctl; + unsigned int i; + + if (bus->chip_id == 0x4312) { + /* We do not touch the BCM4312 PLL and assume + * the default crystal settings work out-of-the-box. */ + cc->pmu.crystalfreq = 20000; + return; + } + + if (crystalfreq) + e = pmu1_plltab_find_entry(crystalfreq); + if (!e) + e = pmu1_plltab_find_entry(SSB_PMU1_DEFAULT_XTALFREQ); + BUG_ON(!e); + crystalfreq = e->freq; + cc->pmu.crystalfreq = e->freq; + + /* Check if the PLL already is programmed to this frequency. */ + pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); + if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) { + /* We're already there... */ + return; + } + + ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n", + (crystalfreq / 1000), (crystalfreq % 1000)); + + /* First turn the PLL off. */ + switch (bus->chip_id) { + case 0x4325: + chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, + ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) | + (1 << SSB_PMURES_4325_HT_AVAIL))); + chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, + ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) | + (1 << SSB_PMURES_4325_HT_AVAIL))); + /* Adjust the BBPLL to 2 on all channels later. */ + buffer_strength = 0x222222; + break; + default: + SSB_WARN_ON(1); + } + for (i = 1500; i; i--) { + tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); + if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)) + break; + udelay(10); + } + tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); + if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT) + ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n"); + + /* Set p1div and p2div. */ + pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0); + pllctl &= ~(SSB_PMU1_PLLCTL0_P1DIV | SSB_PMU1_PLLCTL0_P2DIV); + pllctl |= ((u32)e->p1div << SSB_PMU1_PLLCTL0_P1DIV_SHIFT) & SSB_PMU1_PLLCTL0_P1DIV; + pllctl |= ((u32)e->p2div << SSB_PMU1_PLLCTL0_P2DIV_SHIFT) & SSB_PMU1_PLLCTL0_P2DIV; + ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, pllctl); + + /* Set ndiv int and ndiv mode */ + pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL2); + pllctl &= ~(SSB_PMU1_PLLCTL2_NDIVINT | SSB_PMU1_PLLCTL2_NDIVMODE); + pllctl |= ((u32)e->ndiv_int << SSB_PMU1_PLLCTL2_NDIVINT_SHIFT) & SSB_PMU1_PLLCTL2_NDIVINT; + pllctl |= (1 << SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT) & SSB_PMU1_PLLCTL2_NDIVMODE; + ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, pllctl); + + /* Set ndiv frac */ + pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL3); + pllctl &= ~SSB_PMU1_PLLCTL3_NDIVFRAC; + pllctl |= ((u32)e->ndiv_frac << SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT) & SSB_PMU1_PLLCTL3_NDIVFRAC; + ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, pllctl); + + /* Change the drive strength, if required. */ + if (buffer_strength) { + pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL5); + pllctl &= ~SSB_PMU1_PLLCTL5_CLKDRV; + pllctl |= (buffer_strength << SSB_PMU1_PLLCTL5_CLKDRV_SHIFT) & SSB_PMU1_PLLCTL5_CLKDRV; + ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, pllctl); + } + + /* Tune the crystalfreq and the divisor. */ + pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); + pmuctl &= ~(SSB_CHIPCO_PMU_CTL_ILP_DIV | SSB_CHIPCO_PMU_CTL_XTALFREQ); + pmuctl |= ((((u32)e->freq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT) + & SSB_CHIPCO_PMU_CTL_ILP_DIV; + pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ; + chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl); +} + +static void ssb_pmu_pll_init(struct ssb_chipcommon *cc) +{ + struct ssb_bus *bus = cc->dev->bus; + u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ + + if (bus->bustype == SSB_BUSTYPE_SSB) { + /* TODO: The user may override the crystal frequency. */ + } + + switch (bus->chip_id) { + case 0x4312: + case 0x4325: + ssb_pmu1_pllinit_r0(cc, crystalfreq); + break; + case 0x4328: + case 0x5354: + ssb_pmu0_pllinit_r0(cc, crystalfreq); + break; + default: + ssb_printk(KERN_ERR PFX + "ERROR: PLL init unknown for device %04X\n", + bus->chip_id); + } +} + +struct pmu_res_updown_tab_entry { + u8 resource; /* The resource number */ + u16 updown; /* The updown value */ +}; + +enum pmu_res_depend_tab_task { + PMU_RES_DEP_SET = 1, + PMU_RES_DEP_ADD, + PMU_RES_DEP_REMOVE, +}; + +struct pmu_res_depend_tab_entry { + u8 resource; /* The resource number */ + u8 task; /* SET | ADD | REMOVE */ + u32 depend; /* The depend mask */ +}; + +static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4328a0[] = { + { .resource = SSB_PMURES_4328_EXT_SWITCHER_PWM, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_BB_SWITCHER_PWM, .updown = 0x1F01, }, + { .resource = SSB_PMURES_4328_BB_SWITCHER_BURST, .updown = 0x010F, }, + { .resource = SSB_PMURES_4328_BB_EXT_SWITCHER_BURST, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_ILP_REQUEST, .updown = 0x0202, }, + { .resource = SSB_PMURES_4328_RADIO_SWITCHER_PWM, .updown = 0x0F01, }, + { .resource = SSB_PMURES_4328_RADIO_SWITCHER_BURST, .updown = 0x0F01, }, + { .resource = SSB_PMURES_4328_ROM_SWITCH, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_PA_REF_LDO, .updown = 0x0F01, }, + { .resource = SSB_PMURES_4328_RADIO_LDO, .updown = 0x0F01, }, + { .resource = SSB_PMURES_4328_AFE_LDO, .updown = 0x0F01, }, + { .resource = SSB_PMURES_4328_PLL_LDO, .updown = 0x0F01, }, + { .resource = SSB_PMURES_4328_BG_FILTBYP, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_TX_FILTBYP, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_RX_FILTBYP, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_XTAL_PU, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_XTAL_EN, .updown = 0xA001, }, + { .resource = SSB_PMURES_4328_BB_PLL_FILTBYP, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_RF_PLL_FILTBYP, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_BB_PLL_PU, .updown = 0x0701, }, +}; + +static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4328a0[] = { + { + /* Adjust ILP Request to avoid forcing EXT/BB into burst mode. */ + .resource = SSB_PMURES_4328_ILP_REQUEST, + .task = PMU_RES_DEP_SET, + .depend = ((1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) | + (1 << SSB_PMURES_4328_BB_SWITCHER_PWM)), + }, +}; + +static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4325a0[] = { + { .resource = SSB_PMURES_4325_XTAL_PU, .updown = 0x1501, }, +}; + +static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4325a0[] = { + { + /* Adjust HT-Available dependencies. */ + .resource = SSB_PMURES_4325_HT_AVAIL, + .task = PMU_RES_DEP_ADD, + .depend = ((1 << SSB_PMURES_4325_RX_PWRSW_PU) | + (1 << SSB_PMURES_4325_TX_PWRSW_PU) | + (1 << SSB_PMURES_4325_LOGEN_PWRSW_PU) | + (1 << SSB_PMURES_4325_AFE_PWRSW_PU)), + }, +}; + +static void ssb_pmu_resources_init(struct ssb_chipcommon *cc) +{ + struct ssb_bus *bus = cc->dev->bus; + u32 min_msk = 0, max_msk = 0; + unsigned int i; + const struct pmu_res_updown_tab_entry *updown_tab = NULL; + unsigned int updown_tab_size; + const struct pmu_res_depend_tab_entry *depend_tab = NULL; + unsigned int depend_tab_size; + + switch (bus->chip_id) { + case 0x4312: + /* We keep the default settings: + * min_msk = 0xCBB + * max_msk = 0x7FFFF + */ + break; + case 0x4325: + /* Power OTP down later. */ + min_msk = (1 << SSB_PMURES_4325_CBUCK_BURST) | + (1 << SSB_PMURES_4325_LNLDO2_PU); + if (chipco_read32(cc, SSB_CHIPCO_CHIPSTAT) & + SSB_CHIPCO_CHST_4325_PMUTOP_2B) + min_msk |= (1 << SSB_PMURES_4325_CLDO_CBUCK_BURST); + /* The PLL may turn on, if it decides so. */ + max_msk = 0xFFFFF; + updown_tab = pmu_res_updown_tab_4325a0; + updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4325a0); + depend_tab = pmu_res_depend_tab_4325a0; + depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4325a0); + break; + case 0x4328: + min_msk = (1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) | + (1 << SSB_PMURES_4328_BB_SWITCHER_PWM) | + (1 << SSB_PMURES_4328_XTAL_EN); + /* The PLL may turn on, if it decides so. */ + max_msk = 0xFFFFF; + updown_tab = pmu_res_updown_tab_4328a0; + updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4328a0); + depend_tab = pmu_res_depend_tab_4328a0; + depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4328a0); + break; + case 0x5354: + /* The PLL may turn on, if it decides so. */ + max_msk = 0xFFFFF; + break; + default: + ssb_printk(KERN_ERR PFX + "ERROR: PMU resource config unknown for device %04X\n", + bus->chip_id); + } + + if (updown_tab) { + for (i = 0; i < updown_tab_size; i++) { + chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL, + updown_tab[i].resource); + chipco_write32(cc, SSB_CHIPCO_PMU_RES_UPDNTM, + updown_tab[i].updown); + } + } + if (depend_tab) { + for (i = 0; i < depend_tab_size; i++) { + chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL, + depend_tab[i].resource); + switch (depend_tab[i].task) { + case PMU_RES_DEP_SET: + chipco_write32(cc, SSB_CHIPCO_PMU_RES_DEPMSK, + depend_tab[i].depend); + break; + case PMU_RES_DEP_ADD: + chipco_set32(cc, SSB_CHIPCO_PMU_RES_DEPMSK, + depend_tab[i].depend); + break; + case PMU_RES_DEP_REMOVE: + chipco_mask32(cc, SSB_CHIPCO_PMU_RES_DEPMSK, + ~(depend_tab[i].depend)); + break; + default: + SSB_WARN_ON(1); + } + } + } + + /* Set the resource masks. */ + if (min_msk) + chipco_write32(cc, SSB_CHIPCO_PMU_MINRES_MSK, min_msk); + if (max_msk) + chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk); +} + +void ssb_pmu_init(struct ssb_chipcommon *cc) +{ + struct ssb_bus *bus = cc->dev->bus; + u32 pmucap; + + if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU)) + return; + + pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP); + cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION); + + ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", + cc->pmu.rev, pmucap); + + if (cc->pmu.rev >= 1) { + if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) { + chipco_mask32(cc, SSB_CHIPCO_PMU_CTL, + ~SSB_CHIPCO_PMU_CTL_NOILPONW); + } else { + chipco_set32(cc, SSB_CHIPCO_PMU_CTL, + SSB_CHIPCO_PMU_CTL_NOILPONW); + } + } + ssb_pmu_pll_init(cc); + ssb_pmu_resources_init(cc); +} |