diff options
Diffstat (limited to 'drivers/staging/bcm/Debug.h')
| -rw-r--r-- | drivers/staging/bcm/Debug.h | 356 |
1 files changed, 172 insertions, 184 deletions
diff --git a/drivers/staging/bcm/Debug.h b/drivers/staging/bcm/Debug.h index 8018a189f817..7b331215c1ac 100644 --- a/drivers/staging/bcm/Debug.h +++ b/drivers/staging/bcm/Debug.h @@ -9,142 +9,129 @@ #include <linux/string.h> #define NONE 0xFFFF - -//-------------------------------------------------------------------------------- - /* TYPE and SUBTYPE * Define valid TYPE (or category or code-path, however you like to think of it) * and SUBTYPE s. * Type and SubType are treated as bitmasks. */ -/*-----------------BEGIN TYPEs------------------------------------------*/ -#define DBG_TYPE_INITEXIT (1 << 0) // 1 -#define DBG_TYPE_TX (1 << 1) // 2 -#define DBG_TYPE_RX (1 << 2) // 4 -#define DBG_TYPE_OTHERS (1 << 3) // 8 -/*-----------------END TYPEs------------------------------------------*/ -#define NUMTYPES 4 // careful! - -/*-----------------BEGIN SUBTYPEs---------------------------------------*/ - -/*-SUBTYPEs for TX : TYPE is DBG_TYPE_TX -----// - Transmit.c ,Arp.c, LeakyBucket.c, And Qos.c - total 17 macros */ -// Transmit.c -#define TX 1 -#define MP_SEND (TX<<0) -#define NEXT_SEND (TX<<1) -#define TX_FIFO (TX<<2) -#define TX_CONTROL (TX<<3) - -// Arp.c -#define IP_ADDR (TX<<4) -#define ARP_REQ (TX<<5) -#define ARP_RESP (TX<<6) - -// Leakybucket.c -#define TOKEN_COUNTS (TX<<8) -#define CHECK_TOKENS (TX<<9) -#define TX_PACKETS (TX<<10) -#define TIMER (TX<<11) - -// Qos.c -#define QOS TX -#define QUEUE_INDEX (QOS<<12) -#define IPV4_DBG (QOS<<13) -#define IPV6_DBG (QOS<<14) -#define PRUNE_QUEUE (QOS<<15) -#define SEND_QUEUE (QOS<<16) - -//TX_Misc -#define TX_OSAL_DBG (TX<<17) - - -//--SUBTYPEs for ------INIT & EXIT--------------------- -/*------------ TYPE is DBG_TYPE_INITEXIT -----// -DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c */ -#define MP 1 -#define DRV_ENTRY (MP<<0) -#define MP_INIT (MP<<1) -#define READ_REG (MP<<3) -#define DISPATCH (MP<<2) -#define CLAIM_ADAP (MP<<4) -#define REG_IO_PORT (MP<<5) -#define INIT_DISP (MP<<6) -#define RX_INIT (MP<<7) - - -//-SUBTYPEs for --RX---------------------------------- -//------------RX : TYPE is DBG_TYPE_RX -----// -// Receive.c -#define RX 1 -#define RX_DPC (RX<<0) -#define RX_CTRL (RX<<3) -#define RX_DATA (RX<<4) -#define MP_RETURN (RX<<1) -#define LINK_MSG (RX<<2) - - -//-SUBTYPEs for ----OTHER ROUTINES------------------ -//------------OTHERS : TYPE is DBG_TYPE_OTHER -----// -// HaltnReset,CheckForHang,PnP,Misc,CmHost -// total 12 macros -#define OTHERS 1 -// ??ISR.C - -#define ISR OTHERS -#define MP_DPC (ISR<<0) - -// HaltnReset.c -#define HALT OTHERS -#define MP_HALT (HALT<<1) -#define CHECK_HANG (HALT<<2) -#define MP_RESET (HALT<<3) -#define MP_SHUTDOWN (HALT<<4) - -// pnp.c -#define PNP OTHERS -#define MP_PNP (PNP<<5) - -// Misc.c -#define MISC OTHERS -#define DUMP_INFO (MISC<<6) -#define CLASSIFY (MISC<<7) -#define LINK_UP_MSG (MISC<<8) -#define CP_CTRL_PKT (MISC<<9) -#define DUMP_CONTROL (MISC<<10) -#define LED_DUMP_INFO (MISC<<11) - -// CmHost.c -#define CMHOST OTHERS - - -#define SERIAL (OTHERS<<12) -#define IDLE_MODE (OTHERS<<13) - -#define WRM (OTHERS<<14) -#define RDM (OTHERS<<15) - -// TODO - put PHS_SEND in Tx PHS_RECEIVE in Rx path ? -#define PHS_SEND (OTHERS<<16) -#define PHS_RECEIVE (OTHERS<<17) -#define PHS_MODULE (OTHERS<<18) - -#define INTF_INIT (OTHERS<<19) -#define INTF_ERR (OTHERS<<20) -#define INTF_WARN (OTHERS<<21) -#define INTF_NORM (OTHERS<<22) - -#define IRP_COMPLETION (OTHERS<<23) -#define SF_DESCRIPTOR_CNTS (OTHERS<<24) -#define PHS_DISPATCH (OTHERS << 25) -#define OSAL_DBG (OTHERS << 26) -#define NVM_RW (OTHERS << 27) - -#define HOST_MIBS (OTHERS << 28) -#define CONN_MSG (CMHOST << 29) -/*-----------------END SUBTYPEs------------------------------------------*/ - +#define DBG_TYPE_INITEXIT (1 << 0) /* 1 */ +#define DBG_TYPE_TX (1 << 1) /* 2 */ +#define DBG_TYPE_RX (1 << 2) /* 4 */ +#define DBG_TYPE_OTHERS (1 << 3) /* 8 */ +#define NUMTYPES 4 + +/* -SUBTYPEs for TX : TYPE is DBG_TYPE_TX -----// + * Transmit.c ,Arp.c, LeakyBucket.c, And Qos.c + * total 17 macros + */ +/* Transmit.c */ +#define TX 1 +#define MP_SEND (TX << 0) +#define NEXT_SEND (TX << 1) +#define TX_FIFO (TX << 2) +#define TX_CONTROL (TX << 3) + +/* Arp.c */ +#define IP_ADDR (TX << 4) +#define ARP_REQ (TX << 5) +#define ARP_RESP (TX << 6) + +/* Leakybucket.c */ +#define TOKEN_COUNTS (TX << 8) +#define CHECK_TOKENS (TX << 9) +#define TX_PACKETS (TX << 10) +#define TIMER (TX << 11) + +/* Qos.c */ +#define QOS TX +#define QUEUE_INDEX (QOS << 12) +#define IPV4_DBG (QOS << 13) +#define IPV6_DBG (QOS << 14) +#define PRUNE_QUEUE (QOS << 15) +#define SEND_QUEUE (QOS << 16) + +/* TX_Misc */ +#define TX_OSAL_DBG (TX << 17) + +/* --SUBTYPEs for ------INIT & EXIT--------------------- + * ------------ TYPE is DBG_TYPE_INITEXIT -----// + * DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c + */ +#define MP 1 +#define DRV_ENTRY (MP << 0) +#define MP_INIT (MP << 1) +#define READ_REG (MP << 3) +#define DISPATCH (MP << 2) +#define CLAIM_ADAP (MP << 4) +#define REG_IO_PORT (MP << 5) +#define INIT_DISP (MP << 6) +#define RX_INIT (MP << 7) + +/* -SUBTYPEs for --RX---------------------------------- + * ------------RX : TYPE is DBG_TYPE_RX -----// + * Receive.c + */ +#define RX 1 +#define RX_DPC (RX << 0) +#define RX_CTRL (RX << 3) +#define RX_DATA (RX << 4) +#define MP_RETURN (RX << 1) +#define LINK_MSG (RX << 2) + +/* -SUBTYPEs for ----OTHER ROUTINES------------------ + * ------------OTHERS : TYPE is DBG_TYPE_OTHER -----// + * HaltnReset,CheckForHang,PnP,Misc,CmHost + * total 12 macros + */ +#define OTHERS 1 +#define ISR OTHERS +#define MP_DPC (ISR << 0) + +/* HaltnReset.c */ +#define HALT OTHERS +#define MP_HALT (HALT << 1) +#define CHECK_HANG (HALT << 2) +#define MP_RESET (HALT << 3) +#define MP_SHUTDOWN (HALT << 4) + +/* pnp.c */ +#define PNP OTHERS +#define MP_PNP (PNP << 5) + +/* Misc.c */ +#define MISC OTHERS +#define DUMP_INFO (MISC << 6) +#define CLASSIFY (MISC << 7) +#define LINK_UP_MSG (MISC << 8) +#define CP_CTRL_PKT (MISC << 9) +#define DUMP_CONTROL (MISC << 10) +#define LED_DUMP_INFO (MISC << 11) + +/* CmHost.c */ +#define CMHOST OTHERS +#define SERIAL (OTHERS << 12) +#define IDLE_MODE (OTHERS << 13) +#define WRM (OTHERS << 14) +#define RDM (OTHERS << 15) + +/* TODO - put PHS_SEND in Tx PHS_RECEIVE in Rx path ? */ +#define PHS_SEND (OTHERS << 16) +#define PHS_RECEIVE (OTHERS << 17) +#define PHS_MODULE (OTHERS << 18) + +#define INTF_INIT (OTHERS << 19) +#define INTF_ERR (OTHERS << 20) +#define INTF_WARN (OTHERS << 21) +#define INTF_NORM (OTHERS << 22) + +#define IRP_COMPLETION (OTHERS << 23) +#define SF_DESCRIPTOR_CNTS (OTHERS << 24) +#define PHS_DISPATCH (OTHERS << 25) +#define OSAL_DBG (OTHERS << 26) +#define NVM_RW (OTHERS << 27) + +#define HOST_MIBS (OTHERS << 28) +#define CONN_MSG (CMHOST << 29) /* Debug level * We have 8 debug levels, in (numerical) increasing order of verbosity. @@ -157,57 +144,58 @@ DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c */ * You can compile-time change that to any of the below, if you wish to. However, as of now, there's * no dynamic facility to have the userspace 'TestApp' set debug_level. Slated for future expansion. */ -#define BCM_ALL 7 -#define BCM_LOW 6 -#define BCM_PRINT 5 -#define BCM_NORMAL 4 -#define BCM_MEDIUM 3 -#define BCM_SCREAM 2 -#define BCM_ERR 1 +#define BCM_ALL 7 +#define BCM_LOW 6 +#define BCM_PRINT 5 +#define BCM_NORMAL 4 +#define BCM_MEDIUM 3 +#define BCM_SCREAM 2 +#define BCM_ERR 1 /* Not meant for developer in debug prints. - * To be used to disable all prints by setting the DBG_LVL_CURR to this value */ -#define BCM_NONE 0 + * To be used to disable all prints by setting the DBG_LVL_CURR to this value + */ +#define BCM_NONE 0 /* The current driver logging level. * Everything at this level and (numerically) lower (meaning higher prio) * is logged. -* Replace 'BCM_ALL' in the DBG_LVL_CURR macro with the logging level desired. + * Replace 'BCM_ALL' in the DBG_LVL_CURR macro with the logging level desired. * For eg. to set the logging level to 'errors only' use: * #define DBG_LVL_CURR (BCM_ERR) */ #define DBG_LVL_CURR (BCM_ALL) -#define DBG_LVL_ALL BCM_ALL +#define DBG_LVL_ALL BCM_ALL -/*---Userspace mapping of Debug State. +/* ---Userspace mapping of Debug State. * Delibrately matches that of the Windows driver.. * The TestApp's ioctl passes this struct to us. */ -typedef struct -{ +struct bcm_user_debug_state { unsigned int Subtype, Type; unsigned int OnOff; -// unsigned int debug_level; /* future expansion */ -} __attribute__((packed)) USER_BCM_DBG_STATE; +/* unsigned int debug_level; future expansion */ +} __packed; -//---Kernel-space mapping of Debug State -typedef struct _S_BCM_DEBUG_STATE { - UINT type; +/* ---Kernel-space mapping of Debug State */ +struct bcm_debug_state { + unsigned int type; /* A bitmap of 32 bits for Subtype per Type. * Valid indexes in 'subtype' array are *only* 1,2,4 and 8, * corresponding to valid Type values. Hence we use the 'Type' field * as the index value, ignoring the array entries 0,3,5,6,7 ! */ - UINT subtype[(NUMTYPES*2)+1]; - UINT debug_level; -} S_BCM_DEBUG_STATE; -/* Instantiated in the Adapter structure */ -/* We'll reuse the debug level parameter to include a bit (the MSB) to indicate whether or not - * we want the function's name printed. */ -#define DBG_NO_FUNC_PRINT 1 << 31 + unsigned int subtype[(NUMTYPES*2)+1]; + unsigned int debug_level; +}; +/* Instantiated in the Adapter structure + * We'll reuse the debug level parameter to include a bit (the MSB) to indicate whether or not + * we want the function's name printed. + */ +#define DBG_NO_FUNC_PRINT (1 << 31) #define DBG_LVL_BITMASK 0xFF -//--- Only for direct printk's; "hidden" to API. +/* --- Only for direct printk's; "hidden" to API. */ #define DBG_TYPE_PRINTK 3 #define BCM_DEBUG_PRINT(Adapter, Type, SubType, dbg_level, string, args...) \ @@ -215,40 +203,40 @@ typedef struct _S_BCM_DEBUG_STATE { if (DBG_TYPE_PRINTK == Type) \ pr_info("%s:" string, __func__, ##args); \ else if (Adapter && \ - (dbg_level & DBG_LVL_BITMASK) <= Adapter->stDebugState.debug_level && \ - (Type & Adapter->stDebugState.type) && \ - (SubType & Adapter->stDebugState.subtype[Type])) { \ + (dbg_level & DBG_LVL_BITMASK) <= Adapter->stDebugState.debug_level && \ + (Type & Adapter->stDebugState.type) && \ + (SubType & Adapter->stDebugState.subtype[Type])) { \ if (dbg_level & DBG_NO_FUNC_PRINT) \ - printk(KERN_DEBUG string, ##args); \ + pr_debug("%s:\n", string); \ else \ - printk(KERN_DEBUG "%s:" string, __func__, ##args); \ + pr_debug("%s:\n" string, __func__, ##args); \ } \ } while (0) -#define BCM_DEBUG_PRINT_BUFFER(Adapter, Type, SubType, dbg_level, buffer, bufferlen) do { \ - if (DBG_TYPE_PRINTK == Type || \ - (Adapter && \ - (dbg_level & DBG_LVL_BITMASK) <= Adapter->stDebugState.debug_level && \ - (Type & Adapter->stDebugState.type) && \ - (SubType & Adapter->stDebugState.subtype[Type]))) { \ - printk(KERN_DEBUG "%s:\n", __func__); \ - print_hex_dump(KERN_DEBUG, " ", DUMP_PREFIX_OFFSET, \ - 16, 1, buffer, bufferlen, false); \ - } \ -} while(0) - - -#define BCM_SHOW_DEBUG_BITMAP(Adapter) do { \ - int i; \ - for (i=0; i<(NUMTYPES*2)+1; i++) { \ +#define BCM_DEBUG_PRINT_BUFFER(Adapter, Type, SubType, dbg_level, buffer, bufferlen) \ + do { \ + if (DBG_TYPE_PRINTK == Type || \ + (Adapter && \ + (dbg_level & DBG_LVL_BITMASK) <= Adapter->stDebugState.debug_level && \ + (Type & Adapter->stDebugState.type) && \ + (SubType & Adapter->stDebugState.subtype[Type]))) { \ + pr_debug("%s:\n", __func__); \ + print_hex_dump(KERN_DEBUG, " ", DUMP_PREFIX_OFFSET, \ + 16, 1, buffer, bufferlen, false); \ + } \ + } while (0) + +#define BCM_SHOW_DEBUG_BITMAP(Adapter) do { \ + int i; \ + for (i = 0; i < (NUMTYPES * 2) + 1; i++) { \ if ((i == 1) || (i == 2) || (i == 4) || (i == 8)) { \ - /* CAUTION! Forcefully turn on ALL debug paths and subpaths! \ - Adapter->stDebugState.subtype[i] = 0xffffffff; */ \ - BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "subtype[%d] = 0x%08x\n", \ - i, Adapter->stDebugState.subtype[i]); \ + /* CAUTION! Forcefully turn on ALL debug paths and subpaths! \ + * Adapter->stDebugState.subtype[i] = 0xffffffff; \ + */ \ + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "subtype[%d] = 0x%08x\n", \ + i, Adapter->stDebugState.subtype[i]); \ } \ } \ } while (0) #endif - |