1 files changed, 52 insertions, 76 deletions
diff --git a/drivers/staging/bcm/target_params.h b/drivers/staging/bcm/target_params.h
index ad7ec0054938..dc45f9ab854d 100644
--- a/drivers/staging/bcm/target_params.h
+++ b/drivers/staging/bcm/target_params.h
@@ -1,81 +1,57 @@
 #ifndef TARGET_PARAMS_H
 #define TARGET_PARAMS_H
 
-typedef struct _TARGET_PARAMS
-{
-      B_UINT32 m_u32CfgVersion;
-
-      // Scanning Related Params
-      B_UINT32 m_u32CenterFrequency;
-      B_UINT32 m_u32BandAScan;
-      B_UINT32 m_u32BandBScan;
-      B_UINT32 m_u32BandCScan;
-
-
-      // QoS Params
-      B_UINT32 m_u32ErtpsOptions;
-
-      B_UINT32 m_u32PHSEnable;
-
-
-      // HO Params
-      B_UINT32 m_u32HoEnable;
-
-      B_UINT32 m_u32HoReserved1;
-      B_UINT32 m_u32HoReserved2;
-      // Power Control Params
-
-      B_UINT32 m_u32MimoEnable;
-
-      B_UINT32 m_u32SecurityEnable;
-
-      B_UINT32 m_u32PowerSavingModesEnable; //bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable
-	  /* PowerSaving Mode Options:
-	     bit 0 = 1: CPE mode - to keep pcmcia if alive;
-	     bit 1 = 1: CINR reporting in Idlemode Msg
-	     bit 2 = 1: Default PSC Enable in sleepmode*/
-      B_UINT32 m_u32PowerSavingModeOptions;
-
-      B_UINT32 m_u32ArqEnable;
-
-      // From Version #3, the HARQ section renamed as general
-      B_UINT32 m_u32HarqEnable;
-       // EEPROM Param Location
-       B_UINT32  m_u32EEPROMFlag;
-       // BINARY TYPE - 4th MSByte: Interface Type -  3rd MSByte: Vendor Type - 2nd MSByte
-       // Unused - LSByte
-      B_UINT32   m_u32Customize;
-      B_UINT32   m_u32ConfigBW;  /* In Hz */
-      B_UINT32   m_u32ShutDownInitThresholdTimer;
-
-      B_UINT32  m_u32RadioParameter;
-      B_UINT32  m_u32PhyParameter1;
-      B_UINT32  m_u32PhyParameter2;
-      B_UINT32  m_u32PhyParameter3;
-
-      B_UINT32	  m_u32TestOptions; // in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17  test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack
-
-	B_UINT32 m_u32MaxMACDataperDLFrame;
-	B_UINT32 m_u32MaxMACDataperULFrame;
-
-	B_UINT32 m_u32Corr2MacFlags;
-
-    //adding driver params.
-	B_UINT32 HostDrvrConfig1;
-    B_UINT32 HostDrvrConfig2;
-    B_UINT32 HostDrvrConfig3;
-    B_UINT32 HostDrvrConfig4;
-    B_UINT32 HostDrvrConfig5;
-    B_UINT32 HostDrvrConfig6;
-    B_UINT32 m_u32SegmentedPUSCenable;
-
-	// removed SHUT down related 'unused' params from here to sync 4.x and 5.x CFG files..
-
-    //BAMC Related Parameters
-    //Bit 0-15 Band AMC signaling configuration: Bit 1 = 1  Enable Band AMC signaling.
-    //bit 16-31 Band AMC Data configuration: Bit 16 = 1  Band AMC 2x3 support.
-	B_UINT32 m_u32BandAMCEnable;
-
-} stTargetParams,TARGET_PARAMS,*PTARGET_PARAMS, STARGETPARAMS, *PSTARGETPARAMS;
+struct bcm_target_params {
+	u32 m_u32CfgVersion;
+	u32 m_u32CenterFrequency;
+	u32 m_u32BandAScan;
+	u32 m_u32BandBScan;
+	u32 m_u32BandCScan;
+	u32 m_u32ErtpsOptions;
+	u32 m_u32PHSEnable;
+	u32 m_u32HoEnable;
+	u32 m_u32HoReserved1;
+	u32 m_u32HoReserved2;
+	u32 m_u32MimoEnable;
+	u32 m_u32SecurityEnable;
+	u32 m_u32PowerSavingModesEnable; /* bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable */
+	/* PowerSaving Mode Options:
+	 * bit 0 = 1: CPE mode - to keep pcmcia if alive;
+	 * bit 1 = 1: CINR reporting in Idlemode Msg
+	 * bit 2 = 1: Default PSC Enable in sleepmode
+	 */
+	u32 m_u32PowerSavingModeOptions;
+	u32 m_u32ArqEnable;
+	/* From Version #3, the HARQ section renamed as general */
+	u32 m_u32HarqEnable;
+	u32 m_u32EEPROMFlag;
+	/* BINARY TYPE - 4th MSByte: Interface Type -  3rd MSByte: Vendor Type - 2nd MSByte
+	 * Unused - LSByte
+	 */
+	u32 m_u32Customize;
+	u32 m_u32ConfigBW;  /* In Hz */
+	u32 m_u32ShutDownInitThresholdTimer;
+	u32 m_u32RadioParameter;
+	u32 m_u32PhyParameter1;
+	u32 m_u32PhyParameter2;
+	u32 m_u32PhyParameter3;
+	u32 m_u32TestOptions; /* in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17  test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack */
+	u32 m_u32MaxMACDataperDLFrame;
+	u32 m_u32MaxMACDataperULFrame;
+	u32 m_u32Corr2MacFlags;
+	u32 HostDrvrConfig1;
+	u32 HostDrvrConfig2;
+	u32 HostDrvrConfig3;
+	u32 HostDrvrConfig4;
+	u32 HostDrvrConfig5;
+	u32 HostDrvrConfig6;
+	u32 m_u32SegmentedPUSCenable;
+	/* removed SHUT down related 'unused' params from here to sync 4.x and 5.x CFG files..
+	 * BAMC Related Parameters
+	 * Bit 0-15 Band AMC signaling configuration: Bit 1 = 1  Enable Band AMC signaling.
+	 * bit 16-31 Band AMC Data configuration: Bit 16 = 1  Band AMC 2x3 support.
+	 */
+	u32 m_u32BandAMCEnable;
+};
 
 #endif