diff options
Diffstat (limited to 'drivers/staging/benet/fwcmd_common.h')
| -rw-r--r-- | drivers/staging/benet/fwcmd_common.h | 222 |
1 files changed, 222 insertions, 0 deletions
diff --git a/drivers/staging/benet/fwcmd_common.h b/drivers/staging/benet/fwcmd_common.h new file mode 100644 index 000000000000..406e0d6fa985 --- /dev/null +++ b/drivers/staging/benet/fwcmd_common.h @@ -0,0 +1,222 @@ +/* + * Copyright (C) 2005 - 2008 ServerEngines + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. The full GNU General + * Public License is included in this distribution in the file called COPYING. + * + * Contact Information: + * linux-drivers@serverengines.com + * + * ServerEngines + * 209 N. Fair Oaks Ave + * Sunnyvale, CA 94085 + */ +/* + * Autogenerated by srcgen version: 0127 + */ +#ifndef __fwcmd_common_amap_h__ +#define __fwcmd_common_amap_h__ +#include "host_struct.h" + +/* --- PHY_LINK_DUPLEX_ENUM --- */ +#define PHY_LINK_DUPLEX_NONE (0) +#define PHY_LINK_DUPLEX_HALF (1) +#define PHY_LINK_DUPLEX_FULL (2) + +/* --- PHY_LINK_SPEED_ENUM --- */ +#define PHY_LINK_SPEED_ZERO (0) /* No link. */ +#define PHY_LINK_SPEED_10MBPS (1) /* 10 Mbps */ +#define PHY_LINK_SPEED_100MBPS (2) /* 100 Mbps */ +#define PHY_LINK_SPEED_1GBPS (3) /* 1 Gbps */ +#define PHY_LINK_SPEED_10GBPS (4) /* 10 Gbps */ + +/* --- PHY_LINK_FAULT_ENUM --- */ +#define PHY_LINK_FAULT_NONE (0) /* No fault status + available or detected */ +#define PHY_LINK_FAULT_LOCAL (1) /* Local fault detected */ +#define PHY_LINK_FAULT_REMOTE (2) /* Remote fault detected */ + +/* --- BE_ULP_MASK --- */ +#define BE_ULP0_MASK (1) +#define BE_ULP1_MASK (2) +#define BE_ULP2_MASK (4) + +/* --- NTWK_ACTIVE_PORT --- */ +#define NTWK_PORT_A (0) /* Port A is currently active */ +#define NTWK_PORT_B (1) /* Port B is currently active */ +#define NTWK_NO_ACTIVE_PORT (15) /* Both ports have lost link */ + +/* --- NTWK_LINK_TYPE --- */ +#define NTWK_LINK_TYPE_PHYSICAL (0) /* link up/down event + applies to BladeEngine's + Physical Ports + */ +#define NTWK_LINK_TYPE_VIRTUAL (1) /* Virtual link up/down event + reported by BladeExchange. + This applies only when the + VLD feature is enabled + */ + +/* + * --- FWCMD_MAC_TYPE_ENUM --- + * This enum defines the types of MAC addresses in the RXF MAC Address Table. + */ +#define MAC_ADDRESS_TYPE_STORAGE (0) /* Storage MAC Address */ +#define MAC_ADDRESS_TYPE_NETWORK (1) /* Network MAC Address */ +#define MAC_ADDRESS_TYPE_PD (2) /* Protection Domain MAC Addr */ +#define MAC_ADDRESS_TYPE_MANAGEMENT (3) /* Managment MAC Address */ + + +/* --- FWCMD_RING_TYPE_ENUM --- */ +#define FWCMD_RING_TYPE_ETH_RX (1) /* Ring created with */ + /* FWCMD_COMMON_ETH_RX_CREATE. */ +#define FWCMD_RING_TYPE_ETH_TX (2) /* Ring created with */ + /* FWCMD_COMMON_ETH_TX_CREATE. */ +#define FWCMD_RING_TYPE_ISCSI_WRBQ (3) /* Ring created with */ + /* FWCMD_COMMON_ISCSI_WRBQ_CREATE. */ +#define FWCMD_RING_TYPE_ISCSI_DEFQ (4) /* Ring created with */ + /* FWCMD_COMMON_ISCSI_DEFQ_CREATE. */ +#define FWCMD_RING_TYPE_TPM_WRBQ (5) /* Ring created with */ + /* FWCMD_COMMON_TPM_WRBQ_CREATE. */ +#define FWCMD_RING_TYPE_TPM_DEFQ (6) /* Ring created with */ + /* FWCMD_COMMONTPM_TDEFQ_CREATE. */ +#define FWCMD_RING_TYPE_TPM_RQ (7) /* Ring created with */ + /* FWCMD_COMMON_TPM_RQ_CREATE. */ +#define FWCMD_RING_TYPE_MCC (8) /* Ring created with */ + /* FWCMD_COMMON_MCC_CREATE. */ +#define FWCMD_RING_TYPE_CQ (9) /* Ring created with */ + /* FWCMD_COMMON_CQ_CREATE. */ +#define FWCMD_RING_TYPE_EQ (10) /* Ring created with */ + /* FWCMD_COMMON_EQ_CREATE. */ +#define FWCMD_RING_TYPE_QP (11) /* Ring created with */ + /* FWCMD_RDMA_QP_CREATE. */ + + +/* --- ETH_TX_RING_TYPE_ENUM --- */ +#define ETH_TX_RING_TYPE_FORWARDING (1) /* Ethernet ring for + forwarding packets */ +#define ETH_TX_RING_TYPE_STANDARD (2) /* Ethernet ring for sending + network packets. */ +#define ETH_TX_RING_TYPE_BOUND (3) /* Ethernet ring bound to the + port specified in the command + header.port_number field. + Rings of this type are + NOT subject to the + failover logic implemented + in the BladeEngine. + */ + +/* --- FWCMD_COMMON_QOS_TYPE_ENUM --- */ +#define QOS_BITS_NIC (1) /* max_bits_per_second_NIC */ + /* field is valid. */ +#define QOS_PKTS_NIC (2) /* max_packets_per_second_NIC */ + /* field is valid. */ +#define QOS_IOPS_ISCSI (4) /* max_ios_per_second_iSCSI */ + /*field is valid. */ +#define QOS_VLAN_TAG (8) /* domain_VLAN_tag field + is valid. */ +#define QOS_FABRIC_ID (16) /* fabric_domain_ID field + is valid. */ +#define QOS_OEM_PARAMS (32) /* qos_params_oem field + is valid. */ +#define QOS_TPUT_ISCSI (64) /* max_bytes_per_second_iSCSI + field is valid. */ + + +/* + * --- FAILOVER_CONFIG_ENUM --- + * Failover configuration setting used in FWCMD_COMMON_FORCE_FAILOVER + */ +#define FAILOVER_CONFIG_NO_CHANGE (0) /* No change to automatic */ + /* port failover setting. */ +#define FAILOVER_CONFIG_ON (1) /* Automatic port failover + on link down is enabled. */ +#define FAILOVER_CONFIG_OFF (2) /* Automatic port failover + on link down is disabled. */ + +/* + * --- FAILOVER_PORT_ENUM --- + * Failover port setting used in FWCMD_COMMON_FORCE_FAILOVER + */ +#define FAILOVER_PORT_A (0) /* Selects port A. */ +#define FAILOVER_PORT_B (1) /* Selects port B. */ +#define FAILOVER_PORT_NONE (15) /* No port change requested. */ + + +/* + * --- MGMT_FLASHROM_OPCODE --- + * Flash ROM operation code + */ +#define MGMT_FLASHROM_OPCODE_FLASH (1) /* Commit downloaded data + to Flash ROM */ +#define MGMT_FLASHROM_OPCODE_SAVE (2) /* Save downloaded data to + ARM's DDR - do not flash */ +#define MGMT_FLASHROM_OPCODE_CLEAR (3) /* Erase specified component + from FlashROM */ +#define MGMT_FLASHROM_OPCODE_REPORT (4) /* Read specified component + from Flash ROM */ +#define MGMT_FLASHROM_OPCODE_IMAGE_INFO (5) /* Returns size of a + component */ + +/* + * --- MGMT_FLASHROM_OPTYPE --- + * Flash ROM operation type + */ +#define MGMT_FLASHROM_OPTYPE_CODE_FIRMWARE (0) /* Includes ARM firmware, + IPSec (optional) and EP + firmware */ +#define MGMT_FLASHROM_OPTYPE_CODE_REDBOOT (1) +#define MGMT_FLASHROM_OPTYPE_CODE_BIOS (2) +#define MGMT_FLASHROM_OPTYPE_CODE_PXE_BIOS (3) +#define MGMT_FLASHROM_OPTYPE_CODE_CTRLS (4) +#define MGMT_FLASHROM_OPTYPE_CFG_IPSEC (5) +#define MGMT_FLASHROM_OPTYPE_CFG_INI (6) +#define MGMT_FLASHROM_OPTYPE_ROM_OFFSET_SPECIFIED (7) + +/* + * --- FLASHROM_TYPE --- + * Flash ROM manufacturers supported in the f/w + */ +#define INTEL (0) +#define SPANSION (1) +#define MICRON (2) + +/* --- DDR_CAS_TYPE --- */ +#define CAS_3 (0) +#define CAS_4 (1) +#define CAS_5 (2) + +/* --- DDR_SIZE_TYPE --- */ +#define SIZE_256MB (0) +#define SIZE_512MB (1) + +/* --- DDR_MODE_TYPE --- */ +#define DDR_NO_ECC (0) +#define DDR_ECC (1) + +/* --- INTERFACE_10GB_TYPE --- */ +#define CX4_TYPE (0) +#define XFP_TYPE (1) + +/* --- BE_CHIP_MAX_MTU --- */ +#define CHIP_MAX_MTU (9000) + +/* --- XAUI_STATE_ENUM --- */ +#define XAUI_STATE_ENABLE (0) /* This MUST be the default + value for all requests + which set/change + equalization parameter. */ +#define XAUI_STATE_DISABLE (255) /* The XAUI for both ports + may be disabled for EMI + tests. There is no + provision for turning off + individual ports. + */ +/* --- BE_ASIC_REVISION --- */ +#define BE_ASIC_REV_A0 (1) +#define BE_ASIC_REV_A1 (2) + +#endif /* __fwcmd_common_amap_h__ */ |