diff options
Diffstat (limited to 'drivers/staging/benet/post_codes.h')
| -rw-r--r-- | drivers/staging/benet/post_codes.h | 111 |
1 files changed, 0 insertions, 111 deletions
diff --git a/drivers/staging/benet/post_codes.h b/drivers/staging/benet/post_codes.h deleted file mode 100644 index 6d1621f5f5fb..000000000000 --- a/drivers/staging/benet/post_codes.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * Copyright (C) 2005 - 2008 ServerEngines - * All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. The full GNU General - * Public License is included in this distribution in the file called COPYING. - * - * Contact Information: - * linux-drivers@serverengines.com - * - * ServerEngines - * 209 N. Fair Oaks Ave - * Sunnyvale, CA 94085 - */ -/* - * Autogenerated by srcgen version: 0127 - */ -#ifndef __post_codes_amap_h__ -#define __post_codes_amap_h__ - -/* --- MGMT_HBA_POST_STAGE_ENUM --- */ -#define POST_STAGE_POWER_ON_RESET (0) /* State after a cold or warm boot. */ -#define POST_STAGE_AWAITING_HOST_RDY (1) /* ARM boot code awaiting a - go-ahed from the host. */ -#define POST_STAGE_HOST_RDY (2) /* Host has given go-ahed to ARM. */ -#define POST_STAGE_BE_RESET (3) /* Host wants to reset chip, this is a chip - workaround */ -#define POST_STAGE_SEEPROM_CS_START (256) /* SEEPROM checksum - test start. */ -#define POST_STAGE_SEEPROM_CS_DONE (257) /* SEEPROM checksum test - done. */ -#define POST_STAGE_DDR_CONFIG_START (512) /* DDR configuration start. */ -#define POST_STAGE_DDR_CONFIG_DONE (513) /* DDR configuration done. */ -#define POST_STAGE_DDR_CALIBRATE_START (768) /* DDR calibration start. */ -#define POST_STAGE_DDR_CALIBRATE_DONE (769) /* DDR calibration done. */ -#define POST_STAGE_DDR_TEST_START (1024) /* DDR memory test start. */ -#define POST_STAGE_DDR_TEST_DONE (1025) /* DDR memory test done. */ -#define POST_STAGE_REDBOOT_INIT_START (1536) /* Redboot starts execution. */ -#define POST_STAGE_REDBOOT_INIT_DONE (1537) /* Redboot done execution. */ -#define POST_STAGE_FW_IMAGE_LOAD_START (1792) /* Firmware image load to - DDR start. */ -#define POST_STAGE_FW_IMAGE_LOAD_DONE (1793) /* Firmware image load - to DDR done. */ -#define POST_STAGE_ARMFW_START (2048) /* ARMfw runtime code - starts execution. */ -#define POST_STAGE_DHCP_QUERY_START (2304) /* DHCP server query start. */ -#define POST_STAGE_DHCP_QUERY_DONE (2305) /* DHCP server query done. */ -#define POST_STAGE_BOOT_TARGET_DISCOVERY_START (2560) /* Boot Target - Discovery Start. */ -#define POST_STAGE_BOOT_TARGET_DISCOVERY_DONE (2561) /* Boot Target - Discovery Done. */ -#define POST_STAGE_RC_OPTION_SET (2816) /* Remote configuration - option is set in SEEPROM */ -#define POST_STAGE_SWITCH_LINK (2817) /* Wait for link up on switch */ -#define POST_STAGE_SEND_ICDS_MESSAGE (2818) /* Send the ICDS message - to switch */ -#define POST_STAGE_PERFROM_TFTP (2819) /* Download xml using TFTP */ -#define POST_STAGE_PARSE_XML (2820) /* Parse XML file */ -#define POST_STAGE_DOWNLOAD_IMAGE (2821) /* Download IMAGE from - TFTP server */ -#define POST_STAGE_FLASH_IMAGE (2822) /* Flash the IMAGE */ -#define POST_STAGE_RC_DONE (2823) /* Remote configuration - complete */ -#define POST_STAGE_REBOOT_SYSTEM (2824) /* Upgrade IMAGE done, - reboot required */ -#define POST_STAGE_MAC_ADDRESS (3072) /* MAC Address Check */ -#define POST_STAGE_ARMFW_READY (49152) /* ARMfw is done with POST - and ready. */ -#define POST_STAGE_ARMFW_UE (61440) /* ARMfw has asserted an - unrecoverable error. The - lower 3 hex digits of the - stage code identify the - unique error code. - */ - -/* This structure defines the format of the MPU semaphore - * register when used for POST. - */ -struct BE_MGMT_HBA_POST_STATUS_STRUCT_AMAP { - u8 stage[16]; /* DWORD 0 */ - u8 rsvd0[10]; /* DWORD 0 */ - u8 iscsi_driver_loaded; /* DWORD 0 */ - u8 option_rom_installed; /* DWORD 0 */ - u8 iscsi_ip_conflict; /* DWORD 0 */ - u8 iscsi_no_ip; /* DWORD 0 */ - u8 backup_fw; /* DWORD 0 */ - u8 error; /* DWORD 0 */ -} __packed; -struct MGMT_HBA_POST_STATUS_STRUCT_AMAP { - u32 dw[1]; -}; - -/* --- MGMT_HBA_POST_DUMMY_BITS_ENUM --- */ -#define POST_BIT_ISCSI_LOADED (26) -#define POST_BIT_OPTROM_INST (27) -#define POST_BIT_BAD_IP_ADDR (28) -#define POST_BIT_NO_IP_ADDR (29) -#define POST_BIT_BACKUP_FW (30) -#define POST_BIT_ERROR (31) - -/* --- MGMT_HBA_POST_DUMMY_VALUES_ENUM --- */ -#define POST_ISCSI_DRIVER_LOADED (67108864) -#define POST_OPTROM_INSTALLED (134217728) -#define POST_ISCSI_IP_ADDRESS_CONFLICT (268435456) -#define POST_ISCSI_NO_IP_ADDRESS (536870912) -#define POST_BACKUP_FW_LOADED (1073741824) -#define POST_FATAL_ERROR (2147483648) - -#endif /* __post_codes_amap_h__ */ |