diff options
Diffstat (limited to 'drivers/staging/comedi/drivers/mite.c')
| -rw-r--r-- | drivers/staging/comedi/drivers/mite.c | 809 |
1 files changed, 809 insertions, 0 deletions
diff --git a/drivers/staging/comedi/drivers/mite.c b/drivers/staging/comedi/drivers/mite.c new file mode 100644 index 000000000000..9cc527424d04 --- /dev/null +++ b/drivers/staging/comedi/drivers/mite.c @@ -0,0 +1,809 @@ +/* + comedi/drivers/mite.c + Hardware driver for NI Mite PCI interface chip + + COMEDI - Linux Control and Measurement Device Interface + Copyright (C) 1997-2002 David A. Schleef <ds@schleef.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +/* + The PCI-MIO E series driver was originally written by + Tomasz Motylewski <...>, and ported to comedi by ds. + + References for specifications: + + 321747b.pdf Register Level Programmer Manual (obsolete) + 321747c.pdf Register Level Programmer Manual (new) + DAQ-STC reference manual + + Other possibly relevant info: + + 320517c.pdf User manual (obsolete) + 320517f.pdf User manual (new) + 320889a.pdf delete + 320906c.pdf maximum signal ratings + 321066a.pdf about 16x + 321791a.pdf discontinuation of at-mio-16e-10 rev. c + 321808a.pdf about at-mio-16e-10 rev P + 321837a.pdf discontinuation of at-mio-16de-10 rev d + 321838a.pdf about at-mio-16de-10 rev N + + ISSUES: + +*/ + +//#define USE_KMALLOC + +#include "mite.h" + +#include "comedi_fc.h" +#include "comedi_pci.h" +#include "../comedidev.h" + +#include <asm/system.h> + +#define PCI_MITE_SIZE 4096 +#define PCI_DAQ_SIZE 4096 +#define PCI_DAQ_SIZE_660X 8192 + +MODULE_LICENSE("GPL"); + +struct mite_struct *mite_devices = NULL; + +#define TOP_OF_PAGE(x) ((x)|(~(PAGE_MASK))) + +void mite_init(void) +{ + struct pci_dev *pcidev; + struct mite_struct *mite; + + for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL); + pcidev != NULL; + pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) { + if (pcidev->vendor == PCI_VENDOR_ID_NATINST) { + unsigned i; + + mite = kzalloc(sizeof(*mite), GFP_KERNEL); + if (!mite) { + printk("mite: allocation failed\n"); + pci_dev_put(pcidev); + return; + } + spin_lock_init(&mite->lock); + mite->pcidev = pci_dev_get(pcidev); + for (i = 0; i < MAX_MITE_DMA_CHANNELS; ++i) { + mite->channels[i].mite = mite; + mite->channels[i].channel = i; + mite->channels[i].done = 1; + } + mite->next = mite_devices; + mite_devices = mite; + } + } +} + +static void dump_chip_signature(u32 csigr_bits) +{ + printk("mite: version = %i, type = %i, mite mode = %i, interface mode = %i\n", mite_csigr_version(csigr_bits), mite_csigr_type(csigr_bits), mite_csigr_mmode(csigr_bits), mite_csigr_imode(csigr_bits)); + printk("mite: num channels = %i, write post fifo depth = %i, wins = %i, iowins = %i\n", mite_csigr_dmac(csigr_bits), mite_csigr_wpdep(csigr_bits), mite_csigr_wins(csigr_bits), mite_csigr_iowins(csigr_bits)); +} + +unsigned mite_fifo_size(struct mite_struct * mite, unsigned channel) +{ + unsigned fcr_bits = readl(mite->mite_io_addr + + MITE_FCR(channel)); + unsigned empty_count = (fcr_bits >> 16) & 0xff; + unsigned full_count = fcr_bits & 0xff; + return empty_count + full_count; +} + +int mite_setup2(struct mite_struct *mite, unsigned use_iodwbsr_1) +{ + unsigned long length; + resource_size_t addr; + int i; + u32 csigr_bits; + unsigned unknown_dma_burst_bits; + + if (comedi_pci_enable(mite->pcidev, "mite")) { + printk("error enabling mite and requesting io regions\n"); + return -EIO; + } + pci_set_master(mite->pcidev); + + addr = pci_resource_start(mite->pcidev, 0); + mite->mite_phys_addr = addr; + mite->mite_io_addr = ioremap(addr, PCI_MITE_SIZE); + if (!mite->mite_io_addr) { + printk("failed to remap mite io memory address\n"); + return -ENOMEM; + } + printk("MITE:0x%08llx mapped to %p ", + (unsigned long long)mite->mite_phys_addr, mite->mite_io_addr); + + addr = pci_resource_start(mite->pcidev, 1); + mite->daq_phys_addr = addr; + length = pci_resource_len(mite->pcidev, 1); + // In case of a 660x board, DAQ size is 8k instead of 4k (see as shown by lspci output) + mite->daq_io_addr = ioremap(mite->daq_phys_addr, length); + if (!mite->daq_io_addr) { + printk("failed to remap daq io memory address\n"); + return -ENOMEM; + } + printk("DAQ:0x%08llx mapped to %p\n", + (unsigned long long)mite->daq_phys_addr, mite->daq_io_addr); + + if (use_iodwbsr_1) { + writel(0, mite->mite_io_addr + MITE_IODWBSR); + printk("mite: using I/O Window Base Size register 1\n"); + writel(mite-> + daq_phys_addr | WENAB | + MITE_IODWBSR_1_WSIZE_bits(length), + mite->mite_io_addr + MITE_IODWBSR_1); + writel(0, mite->mite_io_addr + MITE_IODWCR_1); + } else { + writel(mite->daq_phys_addr | WENAB, + mite->mite_io_addr + MITE_IODWBSR); + } + /* make sure dma bursts work. I got this from running a bus analyzer + on a pxi-6281 and a pxi-6713. 6713 powered up with register value + of 0x61f and bursts worked. 6281 powered up with register value of + 0x1f and bursts didn't work. The NI windows driver reads the register, + then does a bitwise-or of 0x600 with it and writes it back. + */ + unknown_dma_burst_bits = + readl(mite->mite_io_addr + MITE_UNKNOWN_DMA_BURST_REG); + unknown_dma_burst_bits |= UNKNOWN_DMA_BURST_ENABLE_BITS; + writel(unknown_dma_burst_bits, + mite->mite_io_addr + MITE_UNKNOWN_DMA_BURST_REG); + + csigr_bits = readl(mite->mite_io_addr + MITE_CSIGR); + mite->num_channels = mite_csigr_dmac(csigr_bits); + if (mite->num_channels > MAX_MITE_DMA_CHANNELS) { + printk("mite: bug? chip claims to have %i dma channels. Setting to %i.\n", mite->num_channels, MAX_MITE_DMA_CHANNELS); + mite->num_channels = MAX_MITE_DMA_CHANNELS; + } + dump_chip_signature(csigr_bits); + for (i = 0; i < mite->num_channels; i++) { + writel(CHOR_DMARESET, mite->mite_io_addr + MITE_CHOR(i)); + /* disable interrupts */ + writel(CHCR_CLR_DMA_IE | CHCR_CLR_LINKP_IE | CHCR_CLR_SAR_IE | + CHCR_CLR_DONE_IE | CHCR_CLR_MRDY_IE | CHCR_CLR_DRDY_IE | + CHCR_CLR_LC_IE | CHCR_CLR_CONT_RB_IE, + mite->mite_io_addr + MITE_CHCR(i)); + } + mite->fifo_size = mite_fifo_size(mite, 0); + printk("mite: fifo size is %i.\n", mite->fifo_size); + mite->used = 1; + + return 0; +} + +int mite_setup(struct mite_struct *mite) +{ + return mite_setup2(mite, 0); +} + +void mite_cleanup(void) +{ + struct mite_struct *mite, *next; + + for (mite = mite_devices; mite; mite = next) { + pci_dev_put(mite->pcidev); + next = mite->next; + kfree(mite); + } +} + +void mite_unsetup(struct mite_struct *mite) +{ + //unsigned long offset, start, length; + + if (!mite) + return; + + if (mite->mite_io_addr) { + iounmap(mite->mite_io_addr); + mite->mite_io_addr = NULL; + } + if (mite->daq_io_addr) { + iounmap(mite->daq_io_addr); + mite->daq_io_addr = NULL; + } + if (mite->mite_phys_addr) { + comedi_pci_disable(mite->pcidev); + mite->mite_phys_addr = 0; + } + + mite->used = 0; +} + +void mite_list_devices(void) +{ + struct mite_struct *mite, *next; + + printk("Available NI device IDs:"); + if (mite_devices) + for (mite = mite_devices; mite; mite = next) { + next = mite->next; + printk(" 0x%04x", mite_device_id(mite)); + if (mite->used) + printk("(used)"); + } + printk("\n"); + +} + +struct mite_channel *mite_request_channel_in_range(struct mite_struct *mite, + struct mite_dma_descriptor_ring *ring, unsigned min_channel, + unsigned max_channel) +{ + int i; + unsigned long flags; + struct mite_channel *channel = NULL; + + // spin lock so mite_release_channel can be called safely from interrupts + comedi_spin_lock_irqsave(&mite->lock, flags); + for (i = min_channel; i <= max_channel; ++i) { + if (mite->channel_allocated[i] == 0) { + mite->channel_allocated[i] = 1; + channel = &mite->channels[i]; + channel->ring = ring; + break; + } + } + comedi_spin_unlock_irqrestore(&mite->lock, flags); + return channel; +} + +void mite_release_channel(struct mite_channel *mite_chan) +{ + struct mite_struct *mite = mite_chan->mite; + unsigned long flags; + + // spin lock to prevent races with mite_request_channel + comedi_spin_lock_irqsave(&mite->lock, flags); + if (mite->channel_allocated[mite_chan->channel]) { + mite_dma_disarm(mite_chan); + mite_dma_reset(mite_chan); +/* disable all channel's interrupts (do it after disarm/reset so +MITE_CHCR reg isn't changed while dma is still active!) */ + writel(CHCR_CLR_DMA_IE | CHCR_CLR_LINKP_IE | + CHCR_CLR_SAR_IE | CHCR_CLR_DONE_IE | + CHCR_CLR_MRDY_IE | CHCR_CLR_DRDY_IE | + CHCR_CLR_LC_IE | CHCR_CLR_CONT_RB_IE, + mite->mite_io_addr + MITE_CHCR(mite_chan->channel)); + mite->channel_allocated[mite_chan->channel] = 0; + mite_chan->ring = NULL; + mmiowb(); + } + comedi_spin_unlock_irqrestore(&mite->lock, flags); +} + +void mite_dma_arm(struct mite_channel *mite_chan) +{ + struct mite_struct *mite = mite_chan->mite; + int chor; + unsigned long flags; + + MDPRINTK("mite_dma_arm ch%i\n", channel); + /* memory barrier is intended to insure any twiddling with the buffer + is done before writing to the mite to arm dma transfer */ + smp_mb(); + /* arm */ + chor = CHOR_START; + comedi_spin_lock_irqsave(&mite->lock, flags); + mite_chan->done = 0; + writel(chor, mite->mite_io_addr + MITE_CHOR(mite_chan->channel)); + mmiowb(); + comedi_spin_unlock_irqrestore(&mite->lock, flags); +// mite_dma_tcr(mite, channel); +} + +/**************************************/ + +int mite_buf_change(struct mite_dma_descriptor_ring *ring, comedi_async * async) +{ + unsigned int n_links; + int i; + + if (ring->descriptors) { + dma_free_coherent(ring->hw_dev, + ring->n_links * sizeof(struct mite_dma_descriptor), + ring->descriptors, ring->descriptors_dma_addr); + } + ring->descriptors = NULL; + ring->descriptors_dma_addr = 0; + ring->n_links = 0; + + if (async->prealloc_bufsz == 0) { + return 0; + } + n_links = async->prealloc_bufsz >> PAGE_SHIFT; + + MDPRINTK("ring->hw_dev=%p, n_links=0x%04x\n", ring->hw_dev, n_links); + + ring->descriptors = + dma_alloc_coherent(ring->hw_dev, + n_links * sizeof(struct mite_dma_descriptor), + &ring->descriptors_dma_addr, GFP_KERNEL); + if (!ring->descriptors) { + printk("mite: ring buffer allocation failed\n"); + return -ENOMEM; + } + ring->n_links = n_links; + + for (i = 0; i < n_links; i++) { + ring->descriptors[i].count = cpu_to_le32(PAGE_SIZE); + ring->descriptors[i].addr = + cpu_to_le32(async->buf_page_list[i].dma_addr); + ring->descriptors[i].next = + cpu_to_le32(ring->descriptors_dma_addr + (i + + 1) * sizeof(struct mite_dma_descriptor)); + } + ring->descriptors[n_links - 1].next = + cpu_to_le32(ring->descriptors_dma_addr); + /* barrier is meant to insure that all the writes to the dma descriptors + have completed before the dma controller is commanded to read them */ + smp_wmb(); + return 0; +} + +void mite_prep_dma(struct mite_channel *mite_chan, + unsigned int num_device_bits, unsigned int num_memory_bits) +{ + unsigned int chor, chcr, mcr, dcr, lkcr; + struct mite_struct *mite = mite_chan->mite; + + MDPRINTK("mite_prep_dma ch%i\n", mite_chan->channel); + + /* reset DMA and FIFO */ + chor = CHOR_DMARESET | CHOR_FRESET; + writel(chor, mite->mite_io_addr + MITE_CHOR(mite_chan->channel)); + + /* short link chaining mode */ + chcr = CHCR_SET_DMA_IE | CHCR_LINKSHORT | CHCR_SET_DONE_IE | + CHCR_BURSTEN; + /* + * Link Complete Interrupt: interrupt every time a link + * in MITE_RING is completed. This can generate a lot of + * extra interrupts, but right now we update the values + * of buf_int_ptr and buf_int_count at each interrupt. A + * better method is to poll the MITE before each user + * "read()" to calculate the number of bytes available. + */ + chcr |= CHCR_SET_LC_IE; + if (num_memory_bits == 32 && num_device_bits == 16) { + /* Doing a combined 32 and 16 bit byteswap gets the 16 bit samples into the fifo in the right order. + Tested doing 32 bit memory to 16 bit device transfers to the analog out of a pxi-6281, + which has mite version = 1, type = 4. This also works for dma reads from the counters + on e-series boards. */ + chcr |= CHCR_BYTE_SWAP_DEVICE | CHCR_BYTE_SWAP_MEMORY; + } + if (mite_chan->dir == COMEDI_INPUT) { + chcr |= CHCR_DEV_TO_MEM; + } + writel(chcr, mite->mite_io_addr + MITE_CHCR(mite_chan->channel)); + + /* to/from memory */ + mcr = CR_RL(64) | CR_ASEQUP; + switch (num_memory_bits) { + case 8: + mcr |= CR_PSIZE8; + break; + case 16: + mcr |= CR_PSIZE16; + break; + case 32: + mcr |= CR_PSIZE32; + break; + default: + rt_printk + ("mite: bug! invalid mem bit width for dma transfer\n"); + break; + } + writel(mcr, mite->mite_io_addr + MITE_MCR(mite_chan->channel)); + + /* from/to device */ + dcr = CR_RL(64) | CR_ASEQUP; + dcr |= CR_PORTIO | CR_AMDEVICE | CR_REQSDRQ(mite_chan->channel); + switch (num_device_bits) { + case 8: + dcr |= CR_PSIZE8; + break; + case 16: + dcr |= CR_PSIZE16; + break; + case 32: + dcr |= CR_PSIZE32; + break; + default: + rt_printk + ("mite: bug! invalid dev bit width for dma transfer\n"); + break; + } + writel(dcr, mite->mite_io_addr + MITE_DCR(mite_chan->channel)); + + /* reset the DAR */ + writel(0, mite->mite_io_addr + MITE_DAR(mite_chan->channel)); + + /* the link is 32bits */ + lkcr = CR_RL(64) | CR_ASEQUP | CR_PSIZE32; + writel(lkcr, mite->mite_io_addr + MITE_LKCR(mite_chan->channel)); + + /* starting address for link chaining */ + writel(mite_chan->ring->descriptors_dma_addr, + mite->mite_io_addr + MITE_LKAR(mite_chan->channel)); + + MDPRINTK("exit mite_prep_dma\n"); +} + +u32 mite_device_bytes_transferred(struct mite_channel *mite_chan) +{ + struct mite_struct *mite = mite_chan->mite; + return readl(mite->mite_io_addr + MITE_DAR(mite_chan->channel)); +} + +u32 mite_bytes_in_transit(struct mite_channel * mite_chan) +{ + struct mite_struct *mite = mite_chan->mite; + return readl(mite->mite_io_addr + + MITE_FCR(mite_chan->channel)) & 0x000000FF; +} + +// returns lower bound for number of bytes transferred from device to memory +u32 mite_bytes_written_to_memory_lb(struct mite_channel * mite_chan) +{ + u32 device_byte_count; + + device_byte_count = mite_device_bytes_transferred(mite_chan); + return device_byte_count - mite_bytes_in_transit(mite_chan); +} + +// returns upper bound for number of bytes transferred from device to memory +u32 mite_bytes_written_to_memory_ub(struct mite_channel * mite_chan) +{ + u32 in_transit_count; + + in_transit_count = mite_bytes_in_transit(mite_chan); + return mite_device_bytes_transferred(mite_chan) - in_transit_count; +} + +// returns lower bound for number of bytes read from memory for transfer to device +u32 mite_bytes_read_from_memory_lb(struct mite_channel * mite_chan) +{ + u32 device_byte_count; + + device_byte_count = mite_device_bytes_transferred(mite_chan); + return device_byte_count + mite_bytes_in_transit(mite_chan); +} + +// returns upper bound for number of bytes read from memory for transfer to device +u32 mite_bytes_read_from_memory_ub(struct mite_channel * mite_chan) +{ + u32 in_transit_count; + + in_transit_count = mite_bytes_in_transit(mite_chan); + return mite_device_bytes_transferred(mite_chan) + in_transit_count; +} + +unsigned mite_dma_tcr(struct mite_channel *mite_chan) +{ + struct mite_struct *mite = mite_chan->mite; + int tcr; + int lkar; + + lkar = readl(mite->mite_io_addr + MITE_LKAR(mite_chan->channel)); + tcr = readl(mite->mite_io_addr + MITE_TCR(mite_chan->channel)); + MDPRINTK("mite_dma_tcr ch%i, lkar=0x%08x tcr=%d\n", mite_chan->channel, + lkar, tcr); + + return tcr; +} + +void mite_dma_disarm(struct mite_channel *mite_chan) +{ + struct mite_struct *mite = mite_chan->mite; + unsigned chor; + + /* disarm */ + chor = CHOR_ABORT; + writel(chor, mite->mite_io_addr + MITE_CHOR(mite_chan->channel)); +} + +int mite_sync_input_dma(struct mite_channel *mite_chan, comedi_async * async) +{ + int count; + unsigned int nbytes, old_alloc_count; + const unsigned bytes_per_scan = cfc_bytes_per_scan(async->subdevice); + + old_alloc_count = async->buf_write_alloc_count; + // write alloc as much as we can + comedi_buf_write_alloc(async, async->prealloc_bufsz); + + nbytes = mite_bytes_written_to_memory_lb(mite_chan); + if ((int)(mite_bytes_written_to_memory_ub(mite_chan) - + old_alloc_count) > 0) { + rt_printk("mite: DMA overwrite of free area\n"); + async->events |= COMEDI_CB_OVERFLOW; + return -1; + } + + count = nbytes - async->buf_write_count; + /* it's possible count will be negative due to + * conservative value returned by mite_bytes_written_to_memory_lb */ + if (count <= 0) { + return 0; + } + comedi_buf_write_free(async, count); + + async->scan_progress += count; + if (async->scan_progress >= bytes_per_scan) { + async->scan_progress %= bytes_per_scan; + async->events |= COMEDI_CB_EOS; + } + async->events |= COMEDI_CB_BLOCK; + return 0; +} + +int mite_sync_output_dma(struct mite_channel *mite_chan, comedi_async * async) +{ + int count; + u32 nbytes_ub, nbytes_lb; + unsigned int old_alloc_count; + u32 stop_count = + async->cmd.stop_arg * cfc_bytes_per_scan(async->subdevice); + + old_alloc_count = async->buf_read_alloc_count; + // read alloc as much as we can + comedi_buf_read_alloc(async, async->prealloc_bufsz); + nbytes_lb = mite_bytes_read_from_memory_lb(mite_chan); + if (async->cmd.stop_src == TRIG_COUNT && + (int)(nbytes_lb - stop_count) > 0) + nbytes_lb = stop_count; + nbytes_ub = mite_bytes_read_from_memory_ub(mite_chan); + if (async->cmd.stop_src == TRIG_COUNT && + (int)(nbytes_ub - stop_count) > 0) + nbytes_ub = stop_count; + if ((int)(nbytes_ub - old_alloc_count) > 0) { + rt_printk("mite: DMA underrun\n"); + async->events |= COMEDI_CB_OVERFLOW; + return -1; + } + count = nbytes_lb - async->buf_read_count; + if (count <= 0) { + return 0; + } + if (count) { + comedi_buf_read_free(async, count); + async->events |= COMEDI_CB_BLOCK; + } + return 0; +} + +unsigned mite_get_status(struct mite_channel *mite_chan) +{ + struct mite_struct *mite = mite_chan->mite; + unsigned status; + unsigned long flags; + + comedi_spin_lock_irqsave(&mite->lock, flags); + status = readl(mite->mite_io_addr + MITE_CHSR(mite_chan->channel)); + if (status & CHSR_DONE) { + mite_chan->done = 1; + writel(CHOR_CLRDONE, + mite->mite_io_addr + MITE_CHOR(mite_chan->channel)); + } + mmiowb(); + comedi_spin_unlock_irqrestore(&mite->lock, flags); + return status; +} + +int mite_done(struct mite_channel *mite_chan) +{ + struct mite_struct *mite = mite_chan->mite; + unsigned long flags; + int done; + + mite_get_status(mite_chan); + comedi_spin_lock_irqsave(&mite->lock, flags); + done = mite_chan->done; + comedi_spin_unlock_irqrestore(&mite->lock, flags); + return done; +} + +#ifdef DEBUG_MITE + +static void mite_decode(char **bit_str, unsigned int bits); + +/* names of bits in mite registers */ + +static const char *const mite_CHOR_strings[] = { + "start", "cont", "stop", "abort", + "freset", "clrlc", "clrrb", "clrdone", + "clr_lpause", "set_lpause", "clr_send_tc", + "set_send_tc", "12", "13", "14", + "15", "16", "17", "18", + "19", "20", "21", "22", + "23", "24", "25", "26", + "27", "28", "29", "30", + "dmareset", +}; + +static const char *const mite_CHCR_strings[] = { + "continue", "ringbuff", "2", "3", + "4", "5", "6", "7", + "8", "9", "10", "11", + "12", "13", "bursten", "fifodis", + "clr_cont_rb_ie", "set_cont_rb_ie", "clr_lc_ie", "set_lc_ie", + "clr_drdy_ie", "set_drdy_ie", "clr_mrdy_ie", "set_mrdy_ie", + "clr_done_ie", "set_done_ie", "clr_sar_ie", "set_sar_ie", + "clr_linkp_ie", "set_linkp_ie", "clr_dma_ie", "set_dma_ie", +}; + +static const char *const mite_MCR_strings[] = { + "amdevice", "1", "2", "3", + "4", "5", "portio", "portvxi", + "psizebyte", "psizehalf (byte & half = word)", "aseqxp1", "11", + "12", "13", "blocken", "berhand", + "reqsintlim/reqs0", "reqs1", "reqs2", "rd32", + "rd512", "rl1", "rl2", "rl8", + "24", "25", "26", "27", + "28", "29", "30", "stopen", +}; + +static const char *const mite_DCR_strings[] = { + "amdevice", "1", "2", "3", + "4", "5", "portio", "portvxi", + "psizebyte", "psizehalf (byte & half = word)", "aseqxp1", "aseqxp2", + "aseqxp8", "13", "blocken", "berhand", + "reqsintlim", "reqs1", "reqs2", "rd32", + "rd512", "rl1", "rl2", "rl8", + "23", "24", "25", "27", + "28", "wsdevc", "wsdevs", "rwdevpack", +}; + +static const char *const mite_LKCR_strings[] = { + "amdevice", "1", "2", "3", + "4", "5", "portio", "portvxi", + "psizebyte", "psizehalf (byte & half = word)", "asequp", "aseqdown", + "12", "13", "14", "berhand", + "16", "17", "18", "rd32", + "rd512", "rl1", "rl2", "rl8", + "24", "25", "26", "27", + "28", "29", "30", "chngend", +}; + +static const char *const mite_CHSR_strings[] = { + "d.err0", "d.err1", "m.err0", "m.err1", + "l.err0", "l.err1", "drq0", "drq1", + "end", "xferr", "operr0", "operr1", + "stops", "habort", "sabort", "error", + "16", "conts_rb", "18", "linkc", + "20", "drdy", "22", "mrdy", + "24", "done", "26", "sars", + "28", "lpauses", "30", "int", +}; + +void mite_dump_regs(struct mite_channel *mite_chan) +{ + unsigned long mite_io_addr = + (unsigned long)mite_chan->mite->mite_io_addr; + unsigned long addr = 0; + unsigned long temp = 0; + + printk("mite_dump_regs ch%i\n", mite_chan->channel); + printk("mite address is =0x%08lx\n", mite_io_addr); + + addr = mite_io_addr + MITE_CHOR(channel); + printk("mite status[CHOR]at 0x%08lx =0x%08lx\n", addr, temp = + readl(addr)); + mite_decode(mite_CHOR_strings, temp); + addr = mite_io_addr + MITE_CHCR(channel); + printk("mite status[CHCR]at 0x%08lx =0x%08lx\n", addr, temp = + readl(addr)); + mite_decode(mite_CHCR_strings, temp); + addr = mite_io_addr + MITE_TCR(channel); + printk("mite status[TCR] at 0x%08lx =0x%08x\n", addr, readl(addr)); + addr = mite_io_addr + MITE_MCR(channel); + printk("mite status[MCR] at 0x%08lx =0x%08lx\n", addr, temp = + readl(addr)); + mite_decode(mite_MCR_strings, temp); + + addr = mite_io_addr + MITE_MAR(channel); + printk("mite status[MAR] at 0x%08lx =0x%08x\n", addr, readl(addr)); + addr = mite_io_addr + MITE_DCR(channel); + printk("mite status[DCR] at 0x%08lx =0x%08lx\n", addr, temp = + readl(addr)); + mite_decode(mite_DCR_strings, temp); + addr = mite_io_addr + MITE_DAR(channel); + printk("mite status[DAR] at 0x%08lx =0x%08x\n", addr, readl(addr)); + addr = mite_io_addr + MITE_LKCR(channel); + printk("mite status[LKCR]at 0x%08lx =0x%08lx\n", addr, temp = + readl(addr)); + mite_decode(mite_LKCR_strings, temp); + addr = mite_io_addr + MITE_LKAR(channel); + printk("mite status[LKAR]at 0x%08lx =0x%08x\n", addr, readl(addr)); + + addr = mite_io_addr + MITE_CHSR(channel); + printk("mite status[CHSR]at 0x%08lx =0x%08lx\n", addr, temp = + readl(addr)); + mite_decode(mite_CHSR_strings, temp); + addr = mite_io_addr + MITE_FCR(channel); + printk("mite status[FCR] at 0x%08lx =0x%08x\n\n", addr, readl(addr)); +} + +static void mite_decode(char **bit_str, unsigned int bits) +{ + int i; + + for (i = 31; i >= 0; i--) { + if (bits & (1 << i)) { + printk(" %s", bit_str[i]); + } + } + printk("\n"); +} +#endif + +#ifdef MODULE +int __init init_module(void) +{ + mite_init(); + mite_list_devices(); + + return 0; +} + +void __exit cleanup_module(void) +{ + mite_cleanup(); +} + +EXPORT_SYMBOL(mite_dma_tcr); +EXPORT_SYMBOL(mite_dma_arm); +EXPORT_SYMBOL(mite_dma_disarm); +EXPORT_SYMBOL(mite_sync_input_dma); +EXPORT_SYMBOL(mite_sync_output_dma); +EXPORT_SYMBOL(mite_setup); +EXPORT_SYMBOL(mite_setup2); +EXPORT_SYMBOL(mite_unsetup); +#if 0 +EXPORT_SYMBOL(mite_kvmem_segment_load); +EXPORT_SYMBOL(mite_ll_from_kvmem); +EXPORT_SYMBOL(mite_setregs); +#endif +EXPORT_SYMBOL(mite_devices); +EXPORT_SYMBOL(mite_list_devices); +EXPORT_SYMBOL(mite_request_channel_in_range); +EXPORT_SYMBOL(mite_release_channel); +EXPORT_SYMBOL(mite_prep_dma); +EXPORT_SYMBOL(mite_buf_change); +EXPORT_SYMBOL(mite_bytes_written_to_memory_lb); +EXPORT_SYMBOL(mite_bytes_written_to_memory_ub); +EXPORT_SYMBOL(mite_bytes_read_from_memory_lb); +EXPORT_SYMBOL(mite_bytes_read_from_memory_ub); +EXPORT_SYMBOL(mite_bytes_in_transit); +EXPORT_SYMBOL(mite_get_status); +EXPORT_SYMBOL(mite_done); +#ifdef DEBUG_MITE +EXPORT_SYMBOL(mite_decode); +EXPORT_SYMBOL(mite_dump_regs); +#endif + +#endif |