diff options
Diffstat (limited to 'drivers/staging/comedi/drivers')
99 files changed, 3243 insertions, 5129 deletions
diff --git a/drivers/staging/comedi/drivers/8255.c b/drivers/staging/comedi/drivers/8255.c index b4009e863414..48817f087d97 100644 --- a/drivers/staging/comedi/drivers/8255.c +++ b/drivers/staging/comedi/drivers/8255.c @@ -94,7 +94,7 @@ I/O port base address can be found in the output of 'lspci -v'. struct subdev_8255_private { unsigned long iobase; - int (*io) (int, int, int, unsigned long); + int (*io)(int, int, int, unsigned long); }; static int subdev_8255_io(int dir, int port, int data, unsigned long iobase) @@ -262,7 +262,7 @@ static int subdev_8255_cancel(struct comedi_device *dev, } int subdev_8255_init(struct comedi_device *dev, struct comedi_subdevice *s, - int (*io) (int, int, int, unsigned long), + int (*io)(int, int, int, unsigned long), unsigned long iobase) { struct subdev_8255_private *spriv; @@ -289,7 +289,7 @@ int subdev_8255_init(struct comedi_device *dev, struct comedi_subdevice *s, EXPORT_SYMBOL_GPL(subdev_8255_init); int subdev_8255_init_irq(struct comedi_device *dev, struct comedi_subdevice *s, - int (*io) (int, int, int, unsigned long), + int (*io)(int, int, int, unsigned long), unsigned long iobase) { int ret; diff --git a/drivers/staging/comedi/drivers/8255_pci.c b/drivers/staging/comedi/drivers/8255_pci.c index c55f234b29e6..8a57c3c1ade0 100644 --- a/drivers/staging/comedi/drivers/8255_pci.c +++ b/drivers/staging/comedi/drivers/8255_pci.c @@ -263,7 +263,7 @@ static int pci_8255_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &pci_8255_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(pci_8255_pci_table) = { +static const struct pci_device_id pci_8255_pci_table[] = { { PCI_VDEVICE(ADLINK, 0x7224), BOARD_ADLINK_PCI7224 }, { PCI_VDEVICE(ADLINK, 0x7248), BOARD_ADLINK_PCI7248 }, { PCI_VDEVICE(ADLINK, 0x7296), BOARD_ADLINK_PCI7296 }, diff --git a/drivers/staging/comedi/drivers/Makefile b/drivers/staging/comedi/drivers/Makefile index 94cbd2618fc8..2706f583d8f0 100644 --- a/drivers/staging/comedi/drivers/Makefile +++ b/drivers/staging/comedi/drivers/Makefile @@ -1,5 +1,6 @@ # Makefile for individual comedi drivers # +ccflags-$(CONFIG_COMEDI_DEBUG) := -DDEBUG # Comedi "helper" modules @@ -110,6 +111,7 @@ obj-$(CONFIG_COMEDI_NI_PCIMIO) += ni_pcimio.o obj-$(CONFIG_COMEDI_RTD520) += rtd520.o obj-$(CONFIG_COMEDI_S626) += s626.o obj-$(CONFIG_COMEDI_SSV_DNP) += ssv_dnp.o +obj-$(CONFIG_COMEDI_MF6X4) += mf6x4.o # Comedi PCMCIA drivers obj-$(CONFIG_COMEDI_CB_DAS16_CS) += cb_das16_cs.o diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c index 3c9eec84f0eb..bd05857b82f2 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c @@ -1414,7 +1414,7 @@ static void v_APCI3120_InterruptDma(int irq, void *d) { struct comedi_device *dev = d; struct addi_private *devpriv = dev->private; - struct comedi_subdevice *s = &dev->subdevices[0]; + struct comedi_subdevice *s = dev->read_subdev; unsigned int next_dma_buf, samplesinbuf; unsigned long low_word, high_word, var; unsigned int ui_Tmp; @@ -1568,8 +1568,8 @@ static void v_APCI3120_InterruptDma(int irq, void *d) static int i_APCI3120_InterruptHandleEos(struct comedi_device *dev) { struct addi_private *devpriv = dev->private; + struct comedi_subdevice *s = dev->read_subdev; int n_chan, i; - struct comedi_subdevice *s = &dev->subdevices[0]; int err = 1; n_chan = devpriv->ui_AiNbrofChannels; @@ -1593,11 +1593,11 @@ static void v_APCI3120_Interrupt(int irq, void *d) { struct comedi_device *dev = d; struct addi_private *devpriv = dev->private; + struct comedi_subdevice *s = dev->read_subdev; unsigned short int_daq; unsigned int int_amcc, ui_Check, i; unsigned short us_TmpValue; unsigned char b_DummyRead; - struct comedi_subdevice *s = &dev->subdevices[0]; ui_Check = 1; diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c index dc73d4d348ed..8c85a09d1c66 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c @@ -2590,8 +2590,8 @@ static int i_APCI3200_CommandAnalogInput(struct comedi_device *dev, static int i_APCI3200_InterruptHandleEos(struct comedi_device *dev) { struct addi_private *devpriv = dev->private; + struct comedi_subdevice *s = dev->read_subdev; unsigned int ui_StatusRegister = 0; - struct comedi_subdevice *s = &dev->subdevices[0]; /* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ /* comedi_async *async = s->async; */ diff --git a/drivers/staging/comedi/drivers/addi_apci_035.c b/drivers/staging/comedi/drivers/addi_apci_035.c index 8d229b2f0973..ccd49211ea17 100644 --- a/drivers/staging/comedi/drivers/addi_apci_035.c +++ b/drivers/staging/comedi/drivers/addi_apci_035.c @@ -58,7 +58,7 @@ static int apci035_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &apci035_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(apci035_pci_table) = { +static const struct pci_device_id apci035_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x0300) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/addi_apci_1032.c b/drivers/staging/comedi/drivers/addi_apci_1032.c index 34ab0679e992..0daa0ea63b5e 100644 --- a/drivers/staging/comedi/drivers/addi_apci_1032.c +++ b/drivers/staging/comedi/drivers/addi_apci_1032.c @@ -325,8 +325,8 @@ static int apci1032_auto_attach(struct comedi_device *dev, s = &dev->subdevices[1]; if (dev->irq) { dev->read_subdev = s; - s->type = COMEDI_SUBD_DI | SDF_CMD_READ; - s->subdev_flags = SDF_READABLE; + s->type = COMEDI_SUBD_DI; + s->subdev_flags = SDF_READABLE | SDF_CMD_READ; s->n_chan = 1; s->maxdata = 1; s->range_table = &range_digital; @@ -364,7 +364,7 @@ static int apci1032_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &apci1032_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(apci1032_pci_table) = { +static const struct pci_device_id apci1032_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1003) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/addi_apci_1500.c b/drivers/staging/comedi/drivers/addi_apci_1500.c index ae9ded63dcec..74f7ace8adbc 100644 --- a/drivers/staging/comedi/drivers/addi_apci_1500.c +++ b/drivers/staging/comedi/drivers/addi_apci_1500.c @@ -57,7 +57,7 @@ static int apci1500_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &apci1500_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(apci1500_pci_table) = { +static const struct pci_device_id apci1500_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMCC, 0x80fc) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/addi_apci_1516.c b/drivers/staging/comedi/drivers/addi_apci_1516.c index 9d1b1425c60b..e9c5291c77cd 100644 --- a/drivers/staging/comedi/drivers/addi_apci_1516.c +++ b/drivers/staging/comedi/drivers/addi_apci_1516.c @@ -206,7 +206,7 @@ static int apci1516_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &apci1516_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(apci1516_pci_table) = { +static const struct pci_device_id apci1516_pci_table[] = { { PCI_VDEVICE(ADDIDATA, 0x1000), BOARD_APCI1016 }, { PCI_VDEVICE(ADDIDATA, 0x1001), BOARD_APCI1516 }, { PCI_VDEVICE(ADDIDATA, 0x1002), BOARD_APCI2016 }, diff --git a/drivers/staging/comedi/drivers/addi_apci_1564.c b/drivers/staging/comedi/drivers/addi_apci_1564.c index c5717d63e16a..6248284caaf5 100644 --- a/drivers/staging/comedi/drivers/addi_apci_1564.c +++ b/drivers/staging/comedi/drivers/addi_apci_1564.c @@ -55,7 +55,7 @@ static int apci1564_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &apci1564_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(apci1564_pci_table) = { +static const struct pci_device_id apci1564_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1006) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/addi_apci_16xx.c b/drivers/staging/comedi/drivers/addi_apci_16xx.c index 5ee204bcbeef..28df4b50b87a 100644 --- a/drivers/staging/comedi/drivers/addi_apci_16xx.c +++ b/drivers/staging/comedi/drivers/addi_apci_16xx.c @@ -168,7 +168,7 @@ static int apci16xx_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &apci16xx_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(apci16xx_pci_table) = { +static const struct pci_device_id apci16xx_pci_table[] = { { PCI_VDEVICE(ADDIDATA, 0x1009), BOARD_APCI1648 }, { PCI_VDEVICE(ADDIDATA, 0x100a), BOARD_APCI1696 }, { 0 } diff --git a/drivers/staging/comedi/drivers/addi_apci_2032.c b/drivers/staging/comedi/drivers/addi_apci_2032.c index c77ee8732d38..c9b933cb5987 100644 --- a/drivers/staging/comedi/drivers/addi_apci_2032.c +++ b/drivers/staging/comedi/drivers/addi_apci_2032.c @@ -359,7 +359,7 @@ static int apci2032_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &apci2032_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(apci2032_pci_table) = { +static const struct pci_device_id apci2032_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1004) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/addi_apci_2200.c b/drivers/staging/comedi/drivers/addi_apci_2200.c index 7fb32e778d8b..e1a916546d18 100644 --- a/drivers/staging/comedi/drivers/addi_apci_2200.c +++ b/drivers/staging/comedi/drivers/addi_apci_2200.c @@ -134,7 +134,7 @@ static int apci2200_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &apci2200_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(apci2200_pci_table) = { +static const struct pci_device_id apci2200_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1005) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/addi_apci_3120.c b/drivers/staging/comedi/drivers/addi_apci_3120.c index 67d09e8afb2e..1e6fa56c516e 100644 --- a/drivers/staging/comedi/drivers/addi_apci_3120.c +++ b/drivers/staging/comedi/drivers/addi_apci_3120.c @@ -230,7 +230,7 @@ static int apci3120_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &apci3120_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(apci3120_pci_table) = { +static const struct pci_device_id apci3120_pci_table[] = { { PCI_VDEVICE(AMCC, 0x818d), BOARD_APCI3120 }, { PCI_VDEVICE(AMCC, 0x828d), BOARD_APCI3001 }, { 0 } diff --git a/drivers/staging/comedi/drivers/addi_apci_3200.c b/drivers/staging/comedi/drivers/addi_apci_3200.c index 1213d5aa6bea..9868a5369aff 100644 --- a/drivers/staging/comedi/drivers/addi_apci_3200.c +++ b/drivers/staging/comedi/drivers/addi_apci_3200.c @@ -109,7 +109,7 @@ static int apci3200_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &apci3200_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(apci3200_pci_table) = { +static const struct pci_device_id apci3200_pci_table[] = { { PCI_VDEVICE(ADDIDATA, 0x3000), BOARD_APCI3200 }, { PCI_VDEVICE(ADDIDATA, 0x3007), BOARD_APCI3300 }, { 0 } diff --git a/drivers/staging/comedi/drivers/addi_apci_3501.c b/drivers/staging/comedi/drivers/addi_apci_3501.c index 6138440b919e..4cb69ec54c9b 100644 --- a/drivers/staging/comedi/drivers/addi_apci_3501.c +++ b/drivers/staging/comedi/drivers/addi_apci_3501.c @@ -428,7 +428,7 @@ static int apci3501_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &apci3501_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(apci3501_pci_table) = { +static const struct pci_device_id apci3501_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3001) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/addi_apci_3xxx.c b/drivers/staging/comedi/drivers/addi_apci_3xxx.c index 761cbf8f964b..ceadf8eff47f 100644 --- a/drivers/staging/comedi/drivers/addi_apci_3xxx.c +++ b/drivers/staging/comedi/drivers/addi_apci_3xxx.c @@ -915,7 +915,7 @@ static int apci3xxx_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &apci3xxx_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(apci3xxx_pci_table) = { +static const struct pci_device_id apci3xxx_pci_table[] = { { PCI_VDEVICE(ADDIDATA, 0x3010), BOARD_APCI3000_16 }, { PCI_VDEVICE(ADDIDATA, 0x300f), BOARD_APCI3000_8 }, { PCI_VDEVICE(ADDIDATA, 0x300e), BOARD_APCI3000_4 }, diff --git a/drivers/staging/comedi/drivers/adl_pci6208.c b/drivers/staging/comedi/drivers/adl_pci6208.c index dd092c7954a9..5c1413abc52d 100644 --- a/drivers/staging/comedi/drivers/adl_pci6208.c +++ b/drivers/staging/comedi/drivers/adl_pci6208.c @@ -242,7 +242,7 @@ static int adl_pci6208_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(adl_pci6208_pci_table) = { +static const struct pci_device_id adl_pci6208_pci_table[] = { { PCI_VDEVICE(ADLINK, 0x6208), BOARD_PCI6208 }, { PCI_VDEVICE(ADLINK, 0x6216), BOARD_PCI6216 }, { 0 } diff --git a/drivers/staging/comedi/drivers/adl_pci7x3x.c b/drivers/staging/comedi/drivers/adl_pci7x3x.c index 5617f5ca384a..6f622b4de698 100644 --- a/drivers/staging/comedi/drivers/adl_pci7x3x.c +++ b/drivers/staging/comedi/drivers/adl_pci7x3x.c @@ -259,7 +259,7 @@ static int adl_pci7x3x_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(adl_pci7x3x_pci_table) = { +static const struct pci_device_id adl_pci7x3x_pci_table[] = { { PCI_VDEVICE(ADLINK, 0x7230), BOARD_PCI7230 }, { PCI_VDEVICE(ADLINK, 0x7233), BOARD_PCI7233 }, { PCI_VDEVICE(ADLINK, 0x7234), BOARD_PCI7234 }, diff --git a/drivers/staging/comedi/drivers/adl_pci8164.c b/drivers/staging/comedi/drivers/adl_pci8164.c index b3d009285ed4..300df55a2802 100644 --- a/drivers/staging/comedi/drivers/adl_pci8164.c +++ b/drivers/staging/comedi/drivers/adl_pci8164.c @@ -145,7 +145,7 @@ static int adl_pci8164_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(adl_pci8164_pci_table) = { +static const struct pci_device_id adl_pci8164_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, 0x8164) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c index eab8da2c3d66..363f2e42a27f 100644 --- a/drivers/staging/comedi/drivers/adl_pci9111.c +++ b/drivers/staging/comedi/drivers/adl_pci9111.c @@ -125,8 +125,7 @@ TODO: PLX9052_INTCSR_LI2STAT) static const struct comedi_lrange pci9111_ai_range = { - 5, - { + 5, { BIP_RANGE(10), BIP_RANGE(5), BIP_RANGE(2.5), @@ -470,11 +469,6 @@ static int pci9111_ai_do_cmd(struct comedi_device *dev, struct pci9111_private_data *dev_private = dev->private; struct comedi_cmd *async_cmd = &s->async->cmd; - if (!dev->irq) { - comedi_error(dev, - "no irq assigned for PCI9111, cannot do hardware conversion"); - return -1; - } /* Set channel scan limit */ /* PCI9111 allows only scanning from channel 0 to channel n */ /* TODO: handle the case of an external multiplexer */ @@ -858,12 +852,11 @@ static int pci9111_auto_attach(struct comedi_device *dev, pci9111_reset(dev); - if (pcidev->irq > 0) { - ret = request_irq(dev->irq, pci9111_interrupt, + if (pcidev->irq) { + ret = request_irq(pcidev->irq, pci9111_interrupt, IRQF_SHARED, dev->board_name, dev); - if (ret) - return ret; - dev->irq = pcidev->irq; + if (ret == 0) + dev->irq = pcidev->irq; } ret = comedi_alloc_subdevices(dev, 4); @@ -871,18 +864,21 @@ static int pci9111_auto_attach(struct comedi_device *dev, return ret; s = &dev->subdevices[0]; - dev->read_subdev = s; s->type = COMEDI_SUBD_AI; - s->subdev_flags = SDF_READABLE | SDF_COMMON | SDF_CMD_READ; + s->subdev_flags = SDF_READABLE | SDF_COMMON; s->n_chan = 16; s->maxdata = 0xffff; - s->len_chanlist = 16; s->range_table = &pci9111_ai_range; - s->cancel = pci9111_ai_cancel; s->insn_read = pci9111_ai_insn_read; - s->do_cmdtest = pci9111_ai_do_cmd_test; - s->do_cmd = pci9111_ai_do_cmd; - s->munge = pci9111_ai_munge; + if (dev->irq) { + dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; + s->len_chanlist = s->n_chan; + s->do_cmdtest = pci9111_ai_do_cmd_test; + s->do_cmd = pci9111_ai_do_cmd; + s->cancel = pci9111_ai_cancel; + s->munge = pci9111_ai_munge; + } s = &dev->subdevices[1]; s->type = COMEDI_SUBD_AO; @@ -938,7 +934,7 @@ static int pci9111_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(pci9111_pci_table) = { +static const struct pci_device_id pci9111_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HR_DEVICE_ID) }, /* { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID) }, */ { 0 } diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c index 986489641ed7..4bdd9720e9eb 100644 --- a/drivers/staging/comedi/drivers/adl_pci9118.c +++ b/drivers/staging/comedi/drivers/adl_pci9118.c @@ -194,28 +194,30 @@ Configuration options: #define EXTTRG_AI 0 /* ext trg is used by AI */ -static const struct comedi_lrange range_pci9118dg_hr = { 8, { - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - BIP_RANGE(0.625), - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2.5), - UNI_RANGE(1.25) - } +static const struct comedi_lrange range_pci9118dg_hr = { + 8, { + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) + } }; -static const struct comedi_lrange range_pci9118hg = { 8, { - BIP_RANGE(5), - BIP_RANGE(0.5), - BIP_RANGE(0.05), - BIP_RANGE(0.005), - UNI_RANGE(10), - UNI_RANGE(1), - UNI_RANGE(0.1), - UNI_RANGE(0.01) - } +static const struct comedi_lrange range_pci9118hg = { + 8, { + BIP_RANGE(5), + BIP_RANGE(0.5), + BIP_RANGE(0.05), + BIP_RANGE(0.005), + UNI_RANGE(10), + UNI_RANGE(1), + UNI_RANGE(0.1), + UNI_RANGE(0.01) + } }; #define PCI9118_BIPOLAR_RANGES 4 /* @@ -1126,7 +1128,7 @@ static irqreturn_t interrupt_pci9118(int irq, void *d) } } - (devpriv->int_ai_func) (dev, &dev->subdevices[0], int_adstat, + (devpriv->int_ai_func) (dev, dev->read_subdev, int_adstat, int_amcc, int_daq); } @@ -1965,7 +1967,6 @@ static int pci9118_common_attach(struct comedi_device *dev, int disable_irq, struct pci_dev *pcidev = comedi_to_pci_dev(dev); struct comedi_subdevice *s; int ret, pages, i; - unsigned int irq; u16 u16w; dev->board_name = this_board->name; @@ -2036,12 +2037,18 @@ static int pci9118_common_attach(struct comedi_device *dev, int disable_irq, pci_write_config_word(pcidev, PCI_COMMAND, u16w | 64); /* Enable parity check for parity error */ + if (!disable_irq && pcidev->irq) { + ret = request_irq(pcidev->irq, interrupt_pci9118, IRQF_SHARED, + dev->board_name, dev); + if (ret == 0) + dev->irq = pcidev->irq; + } + ret = comedi_alloc_subdevices(dev, 4); if (ret) return ret; s = &dev->subdevices[0]; - dev->read_subdev = s; s->type = COMEDI_SUBD_AI; s->subdev_flags = SDF_READABLE | SDF_COMMON | SDF_GROUND | SDF_DIFF; if (devpriv->usemux) @@ -2050,11 +2057,17 @@ static int pci9118_common_attach(struct comedi_device *dev, int disable_irq, s->n_chan = this_board->n_aichan; s->maxdata = this_board->ai_maxdata; - s->len_chanlist = this_board->n_aichanlist; s->range_table = this_board->rangelist_ai; - s->cancel = pci9118_ai_cancel; s->insn_read = pci9118_insn_read_ai; - s->munge = pci9118_ai_munge; + if (dev->irq) { + dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; + s->len_chanlist = this_board->n_aichanlist; + s->do_cmdtest = pci9118_ai_cmdtest; + s->do_cmd = pci9118_ai_cmd; + s->cancel = pci9118_ai_cancel; + s->munge = pci9118_ai_munge; + } s = &dev->subdevices[1]; s->type = COMEDI_SUBD_AO; @@ -2100,27 +2113,7 @@ static int pci9118_common_attach(struct comedi_device *dev, int disable_irq, break; } - if (disable_irq) - irq = 0; - else - irq = pcidev->irq; - if (irq > 0) { - if (request_irq(irq, interrupt_pci9118, IRQF_SHARED, - dev->board_name, dev)) { - dev_warn(dev->class_dev, - "unable to allocate IRQ %u, DISABLING IT\n", - irq); - } else { - dev->irq = irq; - /* Enable AI commands */ - s = &dev->subdevices[0]; - s->subdev_flags |= SDF_CMD_READ; - s->do_cmdtest = pci9118_ai_cmdtest; - s->do_cmd = pci9118_ai_cmd; - } - } - - pci9118_report_attach(dev, irq); + pci9118_report_attach(dev, dev->irq); return 0; } @@ -2217,7 +2210,7 @@ static int adl_pci9118_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(adl_pci9118_pci_table) = { +static const struct pci_device_id adl_pci9118_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMCC, 0x80d9) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/adq12b.c b/drivers/staging/comedi/drivers/adq12b.c index 8150a67cd1fb..3190ef7d285e 100644 --- a/drivers/staging/comedi/drivers/adq12b.c +++ b/drivers/staging/comedi/drivers/adq12b.c @@ -97,21 +97,22 @@ If you do not specify any options, they will default to #define TIMEOUT 20 /* available ranges through the PGA gains */ -static const struct comedi_lrange range_adq12b_ai_bipolar = { 4, { - BIP_RANGE(5), - BIP_RANGE(2), - BIP_RANGE(1), - BIP_RANGE(0.5) - } +static const struct comedi_lrange range_adq12b_ai_bipolar = { + 4, { + BIP_RANGE(5), + BIP_RANGE(2), + BIP_RANGE(1), + BIP_RANGE(0.5) + } }; -static const struct comedi_lrange range_adq12b_ai_unipolar = { 4, { - UNI_RANGE(5), - UNI_RANGE(2), - UNI_RANGE(1), - UNI_RANGE - (0.5) - } +static const struct comedi_lrange range_adq12b_ai_unipolar = { + 4, { + UNI_RANGE(5), + UNI_RANGE(2), + UNI_RANGE(1), + UNI_RANGE(0.5) + } }; struct adq12b_private { @@ -162,8 +163,6 @@ static int adq12b_ai_rinsn(struct comedi_device *dev, hi = inb(dev->iobase + ADQ12B_ADHIG); lo = inb(dev->iobase + ADQ12B_ADLOW); - /* printk("debug: chan=%d range=%d status=%d hi=%d lo=%d\n", - channel, range, status, hi, lo); */ data[n] = (hi << 8) | lo; } diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c index c3fdcabe9aec..593676cf706a 100644 --- a/drivers/staging/comedi/drivers/adv_pci1710.c +++ b/drivers/staging/comedi/drivers/adv_pci1710.c @@ -115,65 +115,70 @@ Configuration options: /* D/A synchronized control (PCI1720_SYNCONT) */ #define Syncont_SC0 1 /* set synchronous output mode */ -static const struct comedi_lrange range_pci1710_3 = { 9, { - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - BIP_RANGE(0.625), - BIP_RANGE(10), - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2.5), - UNI_RANGE(1.25) - } +static const struct comedi_lrange range_pci1710_3 = { + 9, { + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625), + BIP_RANGE(10), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) + } }; static const char range_codes_pci1710_3[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x10, 0x11, 0x12, 0x13 }; -static const struct comedi_lrange range_pci1710hg = { 12, { - BIP_RANGE(5), - BIP_RANGE(0.5), - BIP_RANGE(0.05), - BIP_RANGE(0.005), - BIP_RANGE(10), - BIP_RANGE(1), - BIP_RANGE(0.1), - BIP_RANGE(0.01), - UNI_RANGE(10), - UNI_RANGE(1), - UNI_RANGE(0.1), - UNI_RANGE(0.01) - } +static const struct comedi_lrange range_pci1710hg = { + 12, { + BIP_RANGE(5), + BIP_RANGE(0.5), + BIP_RANGE(0.05), + BIP_RANGE(0.005), + BIP_RANGE(10), + BIP_RANGE(1), + BIP_RANGE(0.1), + BIP_RANGE(0.01), + UNI_RANGE(10), + UNI_RANGE(1), + UNI_RANGE(0.1), + UNI_RANGE(0.01) + } }; static const char range_codes_pci1710hg[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x10, 0x11, 0x12, 0x13 }; -static const struct comedi_lrange range_pci17x1 = { 5, { - BIP_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - BIP_RANGE(0.625) - } +static const struct comedi_lrange range_pci17x1 = { + 5, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625) + } }; static const char range_codes_pci17x1[] = { 0x00, 0x01, 0x02, 0x03, 0x04 }; -static const struct comedi_lrange range_pci1720 = { 4, { - UNI_RANGE(5), - UNI_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(10) - } +static const struct comedi_lrange range_pci1720 = { + 4, { + UNI_RANGE(5), + UNI_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(10) + } }; -static const struct comedi_lrange range_pci171x_da = { 2, { - UNI_RANGE(5), - UNI_RANGE(10), - } +static const struct comedi_lrange range_pci171x_da = { + 2, { + UNI_RANGE(5), + UNI_RANGE(10) + } }; enum pci1710_boardid { @@ -731,7 +736,7 @@ static void interrupt_pci1710_every_sample(void *d) { struct comedi_device *dev = d; struct pci1710_private *devpriv = dev->private; - struct comedi_subdevice *s = &dev->subdevices[0]; + struct comedi_subdevice *s = dev->read_subdev; int m; #ifdef PCI171x_PARANOIDCHECK const struct boardtype *this_board = comedi_board(dev); @@ -740,16 +745,15 @@ static void interrupt_pci1710_every_sample(void *d) m = inw(dev->iobase + PCI171x_STATUS); if (m & Status_FE) { - printk("comedi%d: A/D FIFO empty (%4x)\n", dev->minor, m); + dev_dbg(dev->class_dev, "A/D FIFO empty (%4x)\n", m); pci171x_ai_cancel(dev, s); s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; comedi_event(dev, s); return; } if (m & Status_FF) { - printk - ("comedi%d: A/D FIFO Full status (Fatal Error!) (%4x)\n", - dev->minor, m); + dev_dbg(dev->class_dev, + "A/D FIFO Full status (Fatal Error!) (%4x)\n", m); pci171x_ai_cancel(dev, s); s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; comedi_event(dev, s); @@ -825,12 +829,12 @@ static int move_block_from_fifo(struct comedi_device *dev, sampl = inw(dev->iobase + PCI171x_AD_DATA); if (this_board->cardtype != TYPE_PCI1713) if ((sampl & 0xf000) != devpriv->act_chanlist[j]) { - printk - ("comedi%d: A/D FIFO data dropout: received data from channel %d, expected %d! (%d/%d/%d/%d/%d/%4x)\n", - dev->minor, (sampl & 0xf000) >> 12, - (devpriv->act_chanlist[j] & 0xf000) >> 12, - i, j, devpriv->ai_act_scan, n, turn, - sampl); + dev_dbg(dev->class_dev, + "A/D FIFO data dropout: received data from channel %d, expected %d! (%d/%d/%d/%d/%d/%4x)\n", + (sampl & 0xf000) >> 12, + (devpriv->act_chanlist[j] & 0xf000) >> 12, + i, j, devpriv->ai_act_scan, n, turn, + sampl); pci171x_ai_cancel(dev, s); s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; @@ -860,22 +864,20 @@ static void interrupt_pci1710_half_fifo(void *d) struct comedi_device *dev = d; const struct boardtype *this_board = comedi_board(dev); struct pci1710_private *devpriv = dev->private; - struct comedi_subdevice *s = &dev->subdevices[0]; + struct comedi_subdevice *s = dev->read_subdev; int m, samplesinbuf; m = inw(dev->iobase + PCI171x_STATUS); if (!(m & Status_FH)) { - printk("comedi%d: A/D FIFO not half full! (%4x)\n", - dev->minor, m); + dev_dbg(dev->class_dev, "A/D FIFO not half full! (%4x)\n", m); pci171x_ai_cancel(dev, s); s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; comedi_event(dev, s); return; } if (m & Status_FF) { - printk - ("comedi%d: A/D FIFO Full status (Fatal Error!) (%4x)\n", - dev->minor, m); + dev_dbg(dev->class_dev, + "A/D FIFO Full status (Fatal Error!) (%4x)\n", m); pci171x_ai_cancel(dev, s); s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; comedi_event(dev, s); @@ -1267,21 +1269,21 @@ static int pci1710_auto_attach(struct comedi_device *dev, if (this_board->n_aichan) { s = &dev->subdevices[subdev]; - dev->read_subdev = s; s->type = COMEDI_SUBD_AI; s->subdev_flags = SDF_READABLE | SDF_COMMON | SDF_GROUND; if (this_board->n_aichand) s->subdev_flags |= SDF_DIFF; s->n_chan = this_board->n_aichan; s->maxdata = this_board->ai_maxdata; - s->len_chanlist = this_board->n_aichan; s->range_table = this_board->rangelist_ai; - s->cancel = pci171x_ai_cancel; s->insn_read = pci171x_insn_read_ai; if (dev->irq) { + dev->read_subdev = s; s->subdev_flags |= SDF_CMD_READ; + s->len_chanlist = s->n_chan; s->do_cmdtest = pci171x_ai_cmdtest; s->do_cmd = pci171x_ai_cmd; + s->cancel = pci171x_ai_cancel; } devpriv->i8254_osc_base = I8254_OSC_BASE_10MHZ; subdev++; @@ -1374,7 +1376,7 @@ static int adv_pci1710_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(adv_pci1710_pci_table) = { +static const struct pci_device_id adv_pci1710_pci_table[] = { { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADVANTECH, 0x1710, PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050), diff --git a/drivers/staging/comedi/drivers/adv_pci1723.c b/drivers/staging/comedi/drivers/adv_pci1723.c index bd4f781b4b24..72394267ddfe 100644 --- a/drivers/staging/comedi/drivers/adv_pci1723.c +++ b/drivers/staging/comedi/drivers/adv_pci1723.c @@ -306,7 +306,7 @@ static int adv_pci1723_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(adv_pci1723_pci_table) = { +static const struct pci_device_id adv_pci1723_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1723) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/adv_pci1724.c b/drivers/staging/comedi/drivers/adv_pci1724.c index 009a3039fc4f..af670acb03d8 100644 --- a/drivers/staging/comedi/drivers/adv_pci1724.c +++ b/drivers/staging/comedi/drivers/adv_pci1724.c @@ -116,8 +116,8 @@ enum board_id_contents { BOARD_ID_MASK = 0xf }; -static const struct comedi_lrange ao_ranges_1724 = { 4, - { +static const struct comedi_lrange ao_ranges_1724 = { + 4, { BIP_RANGE(10), RANGE_mA(0, 20), RANGE_mA(4, 20), @@ -381,7 +381,7 @@ static int adv_pci1724_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(adv_pci1724_pci_table) = { +static const struct pci_device_id adv_pci1724_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1724) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/adv_pci_dio.c b/drivers/staging/comedi/drivers/adv_pci_dio.c index 6bac665261f8..d4bd61d84daf 100644 --- a/drivers/staging/comedi/drivers/adv_pci_dio.c +++ b/drivers/staging/comedi/drivers/adv_pci_dio.c @@ -1188,7 +1188,7 @@ static int adv_pci_dio_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &adv_pci_dio_driver, cardtype); } -static DEFINE_PCI_DEVICE_TABLE(adv_pci_dio_pci_table) = { +static const struct pci_device_id adv_pci_dio_pci_table[] = { { PCI_VDEVICE(ADVANTECH, 0x1730), TYPE_PCI1730 }, { PCI_VDEVICE(ADVANTECH, 0x1733), TYPE_PCI1733 }, { PCI_VDEVICE(ADVANTECH, 0x1734), TYPE_PCI1734 }, diff --git a/drivers/staging/comedi/drivers/aio_aio12_8.c b/drivers/staging/comedi/drivers/aio_aio12_8.c index abb28498b58c..68c3fb3226ca 100644 --- a/drivers/staging/comedi/drivers/aio_aio12_8.c +++ b/drivers/staging/comedi/drivers/aio_aio12_8.c @@ -181,13 +181,12 @@ static int aio_aio12_8_ao_write(struct comedi_device *dev, } static const struct comedi_lrange range_aio_aio12_8 = { - 4, - { - UNI_RANGE(5), - BIP_RANGE(5), - UNI_RANGE(10), - BIP_RANGE(10), - } + 4, { + UNI_RANGE(5), + BIP_RANGE(5), + UNI_RANGE(10), + BIP_RANGE(10) + } }; static int aio_aio12_8_attach(struct comedi_device *dev, diff --git a/drivers/staging/comedi/drivers/amcc_s5933.h b/drivers/staging/comedi/drivers/amcc_s5933.h index b810d5f3d971..2ba736444610 100644 --- a/drivers/staging/comedi/drivers/amcc_s5933.h +++ b/drivers/staging/comedi/drivers/amcc_s5933.h @@ -145,12 +145,12 @@ #define AINT_READ_COMPL 0x00008000 #define AINT_WRITE_COMPL 0x00004000 -#define AINT_OMB_ENABLE 0x00001000 -#define AINT_OMB_SELECT 0x00000c00 +#define AINT_OMB_ENABLE 0x00001000 +#define AINT_OMB_SELECT 0x00000c00 #define AINT_OMB_BYTE 0x00000300 -#define AINT_IMB_ENABLE 0x00000010 -#define AINT_IMB_SELECT 0x0000000c +#define AINT_IMB_ENABLE 0x00000010 +#define AINT_IMB_SELECT 0x0000000c #define AINT_IMB_BYTE 0x00000003 /* these are bits from various different registers, needs cleanup XXX */ diff --git a/drivers/staging/comedi/drivers/amplc_dio200_common.c b/drivers/staging/comedi/drivers/amplc_dio200_common.c index 2e4bf284d52c..9c9559ffc643 100644 --- a/drivers/staging/comedi/drivers/amplc_dio200_common.c +++ b/drivers/staging/comedi/drivers/amplc_dio200_common.c @@ -513,7 +513,7 @@ static int dio200_subdev_intr_cmd(struct comedi_device *dev, int event = 0; spin_lock_irqsave(&subpriv->spinlock, flags); - subpriv->active = 1; + subpriv->active = true; /* Set up end of acquisition. */ switch (cmd->stop_src) { diff --git a/drivers/staging/comedi/drivers/amplc_dio200_pci.c b/drivers/staging/comedi/drivers/amplc_dio200_pci.c index a810a2416443..e0367380b37a 100644 --- a/drivers/staging/comedi/drivers/amplc_dio200_pci.c +++ b/drivers/staging/comedi/drivers/amplc_dio200_pci.c @@ -439,7 +439,7 @@ static struct comedi_driver dio200_pci_comedi_driver = { .detach = dio200_pci_detach, }; -static DEFINE_PCI_DEVICE_TABLE(dio200_pci_table) = { +static const struct pci_device_id dio200_pci_table[] = { { PCI_VDEVICE(AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI215), pci215_model diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c index 98075f999c9f..31734e1142fd 100644 --- a/drivers/staging/comedi/drivers/amplc_pc236.c +++ b/drivers/staging/comedi/drivers/amplc_pc236.c @@ -356,7 +356,7 @@ static int pc236_intr_cancel(struct comedi_device *dev, static irqreturn_t pc236_interrupt(int irq, void *d) { struct comedi_device *dev = d; - struct comedi_subdevice *s = &dev->subdevices[1]; + struct comedi_subdevice *s = dev->read_subdev; int handled; handled = pc236_intr_check(dev); @@ -567,7 +567,7 @@ static struct comedi_driver amplc_pc236_driver = { }; #if DO_PCI -static DEFINE_PCI_DEVICE_TABLE(pc236_pci_table) = { +static const struct pci_device_id pc236_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI236) }, {0} }; diff --git a/drivers/staging/comedi/drivers/amplc_pci224.c b/drivers/staging/comedi/drivers/amplc_pci224.c index 810e397d8fd7..ae4048a624fa 100644 --- a/drivers/staging/comedi/drivers/amplc_pci224.c +++ b/drivers/staging/comedi/drivers/amplc_pci224.c @@ -267,17 +267,16 @@ Caveats: /* The software selectable internal ranges for PCI224 (option[2] == 0). */ static const struct comedi_lrange range_pci224_internal = { - 8, - { - BIP_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2.5), - UNI_RANGE(1.25), - } + 8, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) + } }; static const unsigned short hwrange_pci224_internal[8] = { @@ -293,11 +292,10 @@ static const unsigned short hwrange_pci224_internal[8] = { /* The software selectable external ranges for PCI224 (option[2] == 1). */ static const struct comedi_lrange range_pci224_external = { - 2, - { - RANGE_ext(-1, 1), /* bipolar [-Vref,+Vref] */ - RANGE_ext(0, 1), /* unipolar [0,+Vref] */ - } + 2, { + RANGE_ext(-1, 1), /* bipolar [-Vref,+Vref] */ + RANGE_ext(0, 1) /* unipolar [0,+Vref] */ + } }; static const unsigned short hwrange_pci224_external[2] = { @@ -308,19 +306,17 @@ static const unsigned short hwrange_pci224_external[2] = { /* The hardware selectable Vref*2 external range for PCI234 * (option[2] == 1, option[3+n] == 0). */ static const struct comedi_lrange range_pci234_ext2 = { - 1, - { - RANGE_ext(-2, 2), - } + 1, { + RANGE_ext(-2, 2) + } }; /* The hardware selectable Vref external range for PCI234 * (option[2] == 1, option[3+n] == 1). */ static const struct comedi_lrange range_pci234_ext = { - 1, - { - RANGE_ext(-1, 1), - } + 1, { + RANGE_ext(-1, 1) + } }; /* This serves for all the PCI234 ranges. */ @@ -909,16 +905,14 @@ pci224_ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, } if (errors) { if (errors & dupchan_err) { - DPRINTK("comedi%d: " DRIVER_NAME - ": ao_cmdtest: " - "entries in chanlist must contain no " - "duplicate channels\n", dev->minor); + dev_dbg(dev->class_dev, + "%s: entries in chanlist must contain no duplicate channels\n", + __func__); } if (errors & range_err) { - DPRINTK("comedi%d: " DRIVER_NAME - ": ao_cmdtest: " - "entries in chanlist must all have " - "the same range index\n", dev->minor); + dev_dbg(dev->class_dev, + "%s: entries in chanlist must all have the same range index\n", + __func__); } err++; } @@ -1142,7 +1136,7 @@ static irqreturn_t pci224_interrupt(int irq, void *d) { struct comedi_device *dev = d; struct pci224_private *devpriv = dev->private; - struct comedi_subdevice *s = &dev->subdevices[0]; + struct comedi_subdevice *s = dev->write_subdev; struct comedi_cmd *cmd; unsigned char intstat, valid_intstat; unsigned char curenab; @@ -1498,7 +1492,7 @@ static int amplc_pci224_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(amplc_pci224_pci_table) = { +static const struct pci_device_id amplc_pci224_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI224) }, { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI234) }, { 0 } diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c index a97bbd6ca3db..c08dfbbe4062 100644 --- a/drivers/staging/comedi/drivers/amplc_pci230.c +++ b/drivers/staging/comedi/drivers/amplc_pci230.c @@ -546,15 +546,16 @@ static const unsigned int pci230_timebase[8] = { }; /* PCI230 analogue input range table */ -static const struct comedi_lrange pci230_ai_range = { 7, { - BIP_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2.5) - } +static const struct comedi_lrange pci230_ai_range = { + 7, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5) + } }; /* PCI230 analogue gain bits for each input range. */ @@ -564,10 +565,11 @@ static const unsigned char pci230_ai_gain[7] = { 0, 1, 2, 3, 1, 2, 3 }; static const unsigned char pci230_ai_bipolar[7] = { 1, 1, 1, 1, 0, 0, 0 }; /* PCI230 analogue output range table */ -static const struct comedi_lrange pci230_ao_range = { 2, { - UNI_RANGE(10), - BIP_RANGE(10) - } +static const struct comedi_lrange pci230_ao_range = { + 2, { + UNI_RANGE(10), + BIP_RANGE(10) + } }; /* PCI230 daccon bipolar flag for each analogue output range. */ @@ -818,9 +820,9 @@ static int pci230_ai_rinsn(struct comedi_device *dev, if (aref == AREF_DIFF) { /* Differential. */ if (chan >= s->n_chan / 2) { - DPRINTK("comedi%d: amplc_pci230: ai_rinsn: " - "differential channel number out of range " - "0 to %u\n", dev->minor, (s->n_chan / 2) - 1); + dev_dbg(dev->class_dev, + "%s: differential channel number out of range 0 to %u\n", + __func__, (s->n_chan / 2) - 1); return -EINVAL; } } @@ -1092,14 +1094,14 @@ static int pci230_ao_cmdtest(struct comedi_device *dev, if (errors != 0) { err++; if ((errors & seq_err) != 0) { - DPRINTK("comedi%d: amplc_pci230: ao_cmdtest: " - "channel numbers must increase\n", - dev->minor); + dev_dbg(dev->class_dev, + "%s: channel numbers must increase\n", + __func__); } if ((errors & range_err) != 0) { - DPRINTK("comedi%d: amplc_pci230: ao_cmdtest: " - "channels must have the same range\n", - dev->minor); + dev_dbg(dev->class_dev, + "%s: channels must have the same range\n", + __func__); } } } @@ -1835,33 +1837,29 @@ static int pci230_ai_cmdtest(struct comedi_device *dev, if (errors != 0) { err++; if ((errors & seq_err) != 0) { - DPRINTK("comedi%d: amplc_pci230: ai_cmdtest: " - "channel numbers must increase or " - "sequence must repeat exactly\n", - dev->minor); + dev_dbg(dev->class_dev, + "%s: channel numbers must increase or sequence must repeat exactly\n", + __func__); } if ((errors & rangepair_err) != 0) { - DPRINTK("comedi%d: amplc_pci230: ai_cmdtest: " - "single-ended channel pairs must " - "have the same range\n", dev->minor); + dev_dbg(dev->class_dev, + "%s: single-ended channel pairs must have the same range\n", + __func__); } if ((errors & polarity_err) != 0) { - DPRINTK("comedi%d: amplc_pci230: ai_cmdtest: " - "channel sequence ranges must be all " - "bipolar or all unipolar\n", - dev->minor); + dev_dbg(dev->class_dev, + "%s: channel sequence ranges must be all bipolar or all unipolar\n", + __func__); } if ((errors & aref_err) != 0) { - DPRINTK("comedi%d: amplc_pci230: ai_cmdtest: " - "channel sequence analogue references " - "must be all the same (single-ended " - "or differential)\n", dev->minor); + dev_dbg(dev->class_dev, + "%s: channel sequence analogue references must be all the same (single-ended or differential)\n", + __func__); } if ((errors & diffchan_err) != 0) { - DPRINTK("comedi%d: amplc_pci230: ai_cmdtest: " - "differential channel number out of " - "range 0 to %u\n", dev->minor, - (s->n_chan / 2) - 1); + dev_dbg(dev->class_dev, + "%s: differential channel number out of range 0 to %u\n", + __func__, (s->n_chan / 2) - 1); } if ((errors & buggy_chan0_err) != 0) { dev_info(dev->class_dev, @@ -2637,7 +2635,7 @@ static int pci230_attach_common(struct comedi_device *dev, struct comedi_subdevice *s; unsigned long iobase1, iobase2; /* PCI230's I/O spaces 1 and 2 respectively. */ - int irq_hdl, rc; + int rc; comedi_set_hw_dev(dev, &pci_dev->dev); @@ -2709,16 +2707,12 @@ static int pci230_attach_common(struct comedi_device *dev, outw(devpriv->adcg, dev->iobase + PCI230_ADCG); outw(devpriv->adccon | PCI230_ADC_FIFO_RESET, dev->iobase + PCI230_ADCCON); - /* Register the interrupt handler. */ - irq_hdl = request_irq(pci_dev->irq, pci230_interrupt, - IRQF_SHARED, "amplc_pci230", dev); - if (irq_hdl < 0) { - dev_warn(dev->class_dev, - "unable to register irq %u, commands will not be available\n", - pci_dev->irq); - } else { - dev->irq = pci_dev->irq; - dev_dbg(dev->class_dev, "registered irq %u\n", pci_dev->irq); + + if (pci_dev->irq) { + rc = request_irq(pci_dev->irq, pci230_interrupt, IRQF_SHARED, + dev->board_name, dev); + if (rc == 0) + dev->irq = pci_dev->irq; } rc = comedi_alloc_subdevices(dev, 3); @@ -2734,14 +2728,14 @@ static int pci230_attach_common(struct comedi_device *dev, s->range_table = &pci230_ai_range; s->insn_read = &pci230_ai_rinsn; s->len_chanlist = 256; /* but there are restrictions. */ - /* Only register commands if the interrupt handler is installed. */ - if (irq_hdl == 0) { + if (dev->irq) { dev->read_subdev = s; s->subdev_flags |= SDF_CMD_READ; s->do_cmd = &pci230_ai_cmd; s->do_cmdtest = &pci230_ai_cmdtest; s->cancel = pci230_ai_cancel; } + s = &dev->subdevices[1]; /* analog output subdevice */ if (thisboard->ao_chans > 0) { @@ -2753,9 +2747,7 @@ static int pci230_attach_common(struct comedi_device *dev, s->insn_write = &pci230_ao_winsn; s->insn_read = &pci230_ao_rinsn; s->len_chanlist = thisboard->ao_chans; - /* Only register commands if the interrupt handler is - * installed. */ - if (irq_hdl == 0) { + if (dev->irq) { dev->write_subdev = s; s->subdev_flags |= SDF_CMD_WRITE; s->do_cmd = &pci230_ao_cmd; @@ -2765,6 +2757,7 @@ static int pci230_attach_common(struct comedi_device *dev, } else { s->type = COMEDI_SUBD_UNUSED; } + s = &dev->subdevices[2]; /* digital i/o subdevice */ if (thisboard->have_dio) { @@ -2856,7 +2849,7 @@ static int amplc_pci230_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(amplc_pci230_pci_table) = { +static const struct pci_device_id amplc_pci230_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_PCI230) }, { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_PCI260) }, { 0 } diff --git a/drivers/staging/comedi/drivers/amplc_pci263.c b/drivers/staging/comedi/drivers/amplc_pci263.c index 4bd4ef8e88cd..be28e6cbea20 100644 --- a/drivers/staging/comedi/drivers/amplc_pci263.c +++ b/drivers/staging/comedi/drivers/amplc_pci263.c @@ -96,7 +96,7 @@ static struct comedi_driver amplc_pci263_driver = { .detach = comedi_pci_disable, }; -static DEFINE_PCI_DEVICE_TABLE(pci263_pci_table) = { +static const struct pci_device_id pci263_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI263) }, {0} }; diff --git a/drivers/staging/comedi/drivers/c6xdigio.c b/drivers/staging/comedi/drivers/c6xdigio.c index 217aa19cdc32..5034f663eec9 100644 --- a/drivers/staging/comedi/drivers/c6xdigio.c +++ b/drivers/staging/comedi/drivers/c6xdigio.c @@ -94,8 +94,6 @@ static void C6X_pwmInit(unsigned long baseAddr) { int timeout = 0; -/* printk("Inside C6X_pwmInit\n"); */ - WriteByteToHwPort(baseAddr, 0x70); while (((ReadByteFromHwPort(baseAddr + 1) & 0x80) == 0) && (timeout < C6XDIGIO_TIME_OUT)) { @@ -132,8 +130,6 @@ static void C6X_pwmOutput(unsigned long baseAddr, unsigned channel, int value) int timeout = 0; unsigned tmp; - /* printk("Inside C6X_pwmOutput\n"); */ - pwm.cmd = value; if (pwm.cmd > 498) pwm.cmd = 498; @@ -200,8 +196,6 @@ static int C6X_encInput(unsigned long baseAddr, unsigned channel) int timeout = 0; int tmp; - /* printk("Inside C6X_encInput\n"); */ - enc.value = 0; if (channel == 0) ppcmd = 0x48; @@ -295,8 +289,6 @@ static void C6X_encResetAll(unsigned long baseAddr) { unsigned timeout = 0; -/* printk("Inside C6X_encResetAll\n"); */ - WriteByteToHwPort(baseAddr, 0x68); while (((ReadByteFromHwPort(baseAddr + 1) & 0x80) == 0) && (timeout < C6XDIGIO_TIME_OUT)) { @@ -322,14 +314,6 @@ static void C6X_encResetAll(unsigned long baseAddr) } } -static int c6xdigio_pwmo_insn_read(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) -{ - printk(KERN_DEBUG "c6xdigio_pwmo_insn_read %x\n", insn->n); - return insn->n; -} - static int c6xdigio_pwmo_insn_write(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, @@ -338,7 +322,6 @@ static int c6xdigio_pwmo_insn_write(struct comedi_device *dev, int i; int chan = CR_CHAN(insn->chanspec); - /* printk("c6xdigio_pwmo_insn_write %x\n", insn->n); */ for (i = 0; i < insn->n; i++) { C6X_pwmOutput(dev->iobase, chan, data[i]); /* devpriv->ao_readback[chan] = data[i]; */ @@ -346,31 +329,10 @@ static int c6xdigio_pwmo_insn_write(struct comedi_device *dev, return i; } -/* static int c6xdigio_ei_init_insn_read(struct comedi_device *dev, */ -/* struct comedi_subdevice *s, */ -/* struct comedi_insn *insn, */ -/* unsigned int *data) */ -/* { */ -/* printk("c6xdigio_ei_init_insn_read %x\n", insn->n); */ -/* return insn->n; */ -/* } */ - -/* static int c6xdigio_ei_init_insn_write(struct comedi_device *dev, */ -/* struct comedi_subdevice *s, */ -/* struct comedi_insn *insn, */ -/* unsigned int *data) */ -/* { */ -/* int i; */ -/* int chan = CR_CHAN(insn->chanspec); */ - /* *//* C6X_encResetAll( dev->iobase ); */ - /* *//* return insn->n; */ -/* } */ - static int c6xdigio_ei_insn_read(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) { - /* printk("c6xdigio_ei__insn_read %x\n", insn->n); */ int n; int chan = CR_CHAN(insn->chanspec); @@ -382,12 +344,8 @@ static int c6xdigio_ei_insn_read(struct comedi_device *dev, static void board_init(struct comedi_device *dev) { - - /* printk("Inside board_init\n"); */ - C6X_pwmInit(dev->iobase); C6X_encResetAll(dev->iobase); - } static const struct pnp_device_id c6xdigio_pnp_tbl[] = { @@ -426,7 +384,6 @@ static int c6xdigio_attach(struct comedi_device *dev, s->subdev_flags = SDF_WRITEABLE; s->n_chan = 2; /* s->trig[0] = c6xdigio_pwmo; */ - s->insn_read = c6xdigio_pwmo_insn_read; s->insn_write = c6xdigio_pwmo_insn_write; s->maxdata = 500; s->range_table = &range_bipolar10; /* A suitable lie */ @@ -441,17 +398,6 @@ static int c6xdigio_attach(struct comedi_device *dev, s->maxdata = 0xffffff; s->range_table = &range_unknown; - /* s = &dev->subdevices[2]; */ - /* pwm output subdevice */ - /* s->type = COMEDI_SUBD_COUNTER; // Not sure what to put here */ - /* s->subdev_flags = SDF_WRITEABLE; */ - /* s->n_chan = 1; */ - /* s->trig[0] = c6xdigio_ei_init; */ - /* s->insn_read = c6xdigio_ei_init_insn_read; */ - /* s->insn_write = c6xdigio_ei_init_insn_write; */ - /* s->maxdata = 0xFFFF; // Really just a don't care */ - /* s->range_table = &range_unknown; // Not sure what to put here */ - /* I will call this init anyway but more than likely the DSP board */ /* will not be connected when device driver is loaded. */ board_init(dev); diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c index e72a403db17c..9819be092f8d 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas.c +++ b/drivers/staging/comedi/drivers/cb_pcidas.c @@ -181,43 +181,40 @@ static inline unsigned int DAC_DATA_REG(unsigned int channel) /* analog input ranges for most boards */ static const struct comedi_lrange cb_pcidas_ranges = { - 8, - { - BIP_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2.5), - UNI_RANGE(1.25) - } + 8, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) + } }; /* pci-das1001 input ranges */ static const struct comedi_lrange cb_pcidas_alt_ranges = { - 8, - { - BIP_RANGE(10), - BIP_RANGE(1), - BIP_RANGE(0.1), - BIP_RANGE(0.01), - UNI_RANGE(10), - UNI_RANGE(1), - UNI_RANGE(0.1), - UNI_RANGE(0.01) - } + 8, { + BIP_RANGE(10), + BIP_RANGE(1), + BIP_RANGE(0.1), + BIP_RANGE(0.01), + UNI_RANGE(10), + UNI_RANGE(1), + UNI_RANGE(0.1), + UNI_RANGE(0.01) + } }; /* analog output ranges */ static const struct comedi_lrange cb_pcidas_ao_ranges = { - 4, - { - BIP_RANGE(5), - BIP_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(10), - } + 4, { + BIP_RANGE(5), + BIP_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(10) + } }; enum trimpot_model { @@ -1614,7 +1611,7 @@ static int cb_pcidas_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(cb_pcidas_pci_table) = { +static const struct pci_device_id cb_pcidas_pci_table[] = { { PCI_VDEVICE(CB, 0x0001), BOARD_PCIDAS1602_16 }, { PCI_VDEVICE(CB, 0x000f), BOARD_PCIDAS1200 }, { PCI_VDEVICE(CB, 0x0010), BOARD_PCIDAS1602_12 }, diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c index ff5206536be3..4fff1738e3f8 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas64.c +++ b/drivers/staging/comedi/drivers/cb_pcidas64.c @@ -94,15 +94,6 @@ TODO: #include "plx9080.h" #include "comedi_fc.h" -#undef PCIDAS64_DEBUG /* disable debugging code */ -/* #define PCIDAS64_DEBUG enable debugging code */ - -#ifdef PCIDAS64_DEBUG -#define DEBUG_PRINT(format, args...) pr_debug(format, ## args) -#else -#define DEBUG_PRINT(format, args...) no_printk(format, ## args) -#endif - #define TIMER_BASE 25 /* 40MHz master clock */ /* 100kHz 'prescaled' clock for slow acquisition, * maybe I'll support this someday */ @@ -438,91 +429,85 @@ static inline uint8_t attenuate_bit(unsigned int channel) /* analog input ranges for 64xx boards */ static const struct comedi_lrange ai_ranges_64xx = { - 8, - { - BIP_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2.5), - UNI_RANGE(1.25) - } + 8, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) + } }; /* analog input ranges for 60xx boards */ static const struct comedi_lrange ai_ranges_60xx = { - 4, - { - BIP_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(0.5), - BIP_RANGE(0.05), - } + 4, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(0.5), + BIP_RANGE(0.05) + } }; /* analog input ranges for 6030, etc boards */ static const struct comedi_lrange ai_ranges_6030 = { - 14, - { - BIP_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(2), - BIP_RANGE(1), - BIP_RANGE(0.5), - BIP_RANGE(0.2), - BIP_RANGE(0.1), - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2), - UNI_RANGE(1), - UNI_RANGE(0.5), - UNI_RANGE(0.2), - UNI_RANGE(0.1), - } + 14, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2), + BIP_RANGE(1), + BIP_RANGE(0.5), + BIP_RANGE(0.2), + BIP_RANGE(0.1), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2), + UNI_RANGE(1), + UNI_RANGE(0.5), + UNI_RANGE(0.2), + UNI_RANGE(0.1) + } }; /* analog input ranges for 6052, etc boards */ static const struct comedi_lrange ai_ranges_6052 = { - 15, - { - BIP_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1), - BIP_RANGE(0.5), - BIP_RANGE(0.25), - BIP_RANGE(0.1), - BIP_RANGE(0.05), - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2), - UNI_RANGE(1), - UNI_RANGE(0.5), - UNI_RANGE(0.2), - UNI_RANGE(0.1), - } + 15, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1), + BIP_RANGE(0.5), + BIP_RANGE(0.25), + BIP_RANGE(0.1), + BIP_RANGE(0.05), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2), + UNI_RANGE(1), + UNI_RANGE(0.5), + UNI_RANGE(0.2), + UNI_RANGE(0.1) + } }; /* analog input ranges for 4020 board */ static const struct comedi_lrange ai_ranges_4020 = { - 2, - { - BIP_RANGE(5), - BIP_RANGE(1), - } + 2, { + BIP_RANGE(5), + BIP_RANGE(1) + } }; /* analog output ranges */ static const struct comedi_lrange ao_ranges_64xx = { - 4, - { - BIP_RANGE(5), - BIP_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(10), - } + 4, { + BIP_RANGE(5), + BIP_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(10) + } }; static const int ao_range_code_64xx[] = { @@ -537,11 +522,10 @@ static const int ao_range_code_60xx[] = { }; static const struct comedi_lrange ao_ranges_6030 = { - 2, - { - BIP_RANGE(10), - UNI_RANGE(10), - } + 2, { + BIP_RANGE(10), + UNI_RANGE(10) + } }; static const int ao_range_code_6030[] = { @@ -550,11 +534,10 @@ static const int ao_range_code_6030[] = { }; static const struct comedi_lrange ao_ranges_4020 = { - 2, - { - BIP_RANGE(5), - BIP_RANGE(10), - } + 2, { + BIP_RANGE(5), + BIP_RANGE(10) + } }; static const int ao_range_code_4020[] = { @@ -1252,8 +1235,6 @@ static void disable_ai_interrupts(struct comedi_device *dev) writew(devpriv->intr_enable_bits, devpriv->main_iobase + INTR_ENABLE_REG); spin_unlock_irqrestore(&dev->spinlock, flags); - - DEBUG_PRINT("intr enable bits 0x%x\n", devpriv->intr_enable_bits); } static void enable_ai_interrupts(struct comedi_device *dev, @@ -1277,7 +1258,6 @@ static void enable_ai_interrupts(struct comedi_device *dev, devpriv->intr_enable_bits |= bits; writew(devpriv->intr_enable_bits, devpriv->main_iobase + INTR_ENABLE_REG); - DEBUG_PRINT("intr enable bits 0x%x\n", devpriv->intr_enable_bits); spin_unlock_irqrestore(&dev->spinlock, flags); } @@ -1292,38 +1272,6 @@ static void init_plx9080(struct comedi_device *dev) devpriv->plx_control_bits = readl(devpriv->plx9080_iobase + PLX_CONTROL_REG); - /* plx9080 dump */ - DEBUG_PRINT(" plx interrupt status 0x%x\n", - readl(plx_iobase + PLX_INTRCS_REG)); - DEBUG_PRINT(" plx id bits 0x%x\n", readl(plx_iobase + PLX_ID_REG)); - DEBUG_PRINT(" plx control reg 0x%x\n", devpriv->plx_control_bits); - DEBUG_PRINT(" plx mode/arbitration reg 0x%x\n", - readl(plx_iobase + PLX_MARB_REG)); - DEBUG_PRINT(" plx region0 reg 0x%x\n", - readl(plx_iobase + PLX_REGION0_REG)); - DEBUG_PRINT(" plx region1 reg 0x%x\n", - readl(plx_iobase + PLX_REGION1_REG)); - - DEBUG_PRINT(" plx revision 0x%x\n", - readl(plx_iobase + PLX_REVISION_REG)); - DEBUG_PRINT(" plx dma channel 0 mode 0x%x\n", - readl(plx_iobase + PLX_DMA0_MODE_REG)); - DEBUG_PRINT(" plx dma channel 1 mode 0x%x\n", - readl(plx_iobase + PLX_DMA1_MODE_REG)); - DEBUG_PRINT(" plx dma channel 0 pci address 0x%x\n", - readl(plx_iobase + PLX_DMA0_PCI_ADDRESS_REG)); - DEBUG_PRINT(" plx dma channel 0 local address 0x%x\n", - readl(plx_iobase + PLX_DMA0_LOCAL_ADDRESS_REG)); - DEBUG_PRINT(" plx dma channel 0 transfer size 0x%x\n", - readl(plx_iobase + PLX_DMA0_TRANSFER_SIZE_REG)); - DEBUG_PRINT(" plx dma channel 0 descriptor 0x%x\n", - readl(plx_iobase + PLX_DMA0_DESCRIPTOR_REG)); - DEBUG_PRINT(" plx dma channel 0 command status 0x%x\n", - readb(plx_iobase + PLX_DMA0_CS_REG)); - DEBUG_PRINT(" plx dma channel 0 threshold 0x%x\n", - readl(plx_iobase + PLX_DMA0_THRESHOLD_REG)); - DEBUG_PRINT(" plx bigend 0x%x\n", readl(plx_iobase + PLX_BIGEND_REG)); - #ifdef __BIG_ENDIAN bits = BIGEND_DMA0 | BIGEND_DMA1; #else @@ -1417,9 +1365,6 @@ static int set_ai_fifo_segment_length(struct comedi_device *dev, devpriv->ai_fifo_segment_length = num_increments * increment_size; - DEBUG_PRINT("set hardware fifo segment length to %i\n", - devpriv->ai_fifo_segment_length); - return devpriv->ai_fifo_segment_length; } @@ -1441,8 +1386,6 @@ static int set_ai_fifo_size(struct comedi_device *dev, unsigned int num_samples) num_samples = retval * fifo->num_segments * fifo->sample_packing_ratio; - DEBUG_PRINT("set hardware fifo size to %i\n", num_samples); - return num_samples; } @@ -1538,8 +1481,6 @@ static int alloc_and_init_dma_members(struct comedi_device *dev) if (devpriv->ai_dma_desc == NULL) return -ENOMEM; - DEBUG_PRINT("ai dma descriptors start at bus addr 0x%llx\n", - (unsigned long long)devpriv->ai_dma_desc_bus_addr); if (ao_cmd_is_supported(thisboard)) { devpriv->ao_dma_desc = pci_alloc_consistent(pcidev, @@ -1548,9 +1489,6 @@ static int alloc_and_init_dma_members(struct comedi_device *dev) &devpriv->ao_dma_desc_bus_addr); if (devpriv->ao_dma_desc == NULL) return -ENOMEM; - - DEBUG_PRINT("ao dma descriptors start at bus addr 0x%llx\n", - (unsigned long long)devpriv->ao_dma_desc_bus_addr); } /* initialize dma descriptors */ for (i = 0; i < ai_dma_ring_count(thisboard); i++) { @@ -1650,8 +1588,6 @@ static void i2c_write_byte(struct comedi_device *dev, uint8_t byte) uint8_t bit; unsigned int num_bits = 8; - DEBUG_PRINT("writing to i2c byte 0x%x\n", byte); - for (bit = 1 << (num_bits - 1); bit; bit >>= 1) { i2c_set_scl(dev, 0); if ((byte & bit)) @@ -1738,7 +1674,6 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, unsigned long flags; static const int timeout = 100; - DEBUG_PRINT("chanspec 0x%x\n", insn->chanspec); channel = CR_CHAN(insn->chanspec); range = CR_RANGE(insn->chanspec); aref = CR_AREF(insn->chanspec); @@ -1766,7 +1701,6 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, if (insn->chanspec & CR_ALT_SOURCE) { unsigned int cal_en_bit; - DEBUG_PRINT("reading calibration source\n"); if (thisboard->layout == LAYOUT_60XX) cal_en_bit = CAL_EN_60XX_BIT; else @@ -1800,7 +1734,6 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, devpriv->i2c_cal_range_bits &= ~ADC_SRC_4020_MASK; if (insn->chanspec & CR_ALT_SOURCE) { - DEBUG_PRINT("reading calibration source\n"); devpriv->i2c_cal_range_bits |= adc_src_4020_bits(devpriv->calibration_source); } else { /* select BNC inputs */ @@ -1839,7 +1772,6 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, /* wait for data */ for (i = 0; i < timeout; i++) { bits = readw(devpriv->main_iobase + HW_STATUS_REG); - DEBUG_PRINT(" pipe bits 0x%x\n", pipe_full_bits(bits)); if (thisboard->layout == LAYOUT_4020) { if (readw(devpriv->main_iobase + ADC_WRITE_PNTR_REG)) @@ -1850,7 +1782,6 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, } udelay(1); } - DEBUG_PRINT(" looped %i times waiting for data\n", i); if (i == timeout) { comedi_error(dev, " analog input read insn timed out"); dev_info(dev->class_dev, "status 0x%x\n", bits); @@ -1884,7 +1815,6 @@ static int ai_config_calibration_source(struct comedi_device *dev, return -EINVAL; } - DEBUG_PRINT("setting calibration source to %i\n", source); devpriv->calibration_source = source; return 2; @@ -2368,7 +2298,6 @@ static void set_ai_pacing(struct comedi_device *dev, struct comedi_cmd *cmd) /* load lower 16 bits of convert interval */ writew(convert_counter & 0xffff, devpriv->main_iobase + ADC_SAMPLE_INTERVAL_LOWER_REG); - DEBUG_PRINT("convert counter 0x%x\n", convert_counter); /* load upper 8 bits of convert interval */ writew((convert_counter >> 16) & 0xff, devpriv->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG); @@ -2378,7 +2307,6 @@ static void set_ai_pacing(struct comedi_device *dev, struct comedi_cmd *cmd) /* load upper 8 bits of scan delay */ writew((scan_counter >> 16) & 0xff, devpriv->main_iobase + ADC_DELAY_INTERVAL_UPPER_REG); - DEBUG_PRINT("scan counter 0x%x\n", scan_counter); } static int use_internal_queue_6xxx(const struct comedi_cmd *cmd) @@ -2469,9 +2397,6 @@ static int setup_channel_queue(struct comedi_device *dev, writew(bits, devpriv->main_iobase + ADC_QUEUE_FIFO_REG); - DEBUG_PRINT( - "wrote 0x%x to external channel queue\n", - bits); } /* doing a queue clear is not specified in board docs, * but required for reliable operation */ @@ -2593,7 +2518,6 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) } writew(devpriv->adc_control1_bits, devpriv->main_iobase + ADC_CONTROL1_REG); - DEBUG_PRINT("control1 bits 0x%x\n", devpriv->adc_control1_bits); spin_unlock_irqrestore(&dev->spinlock, flags); /* clear adc buffer */ @@ -2645,17 +2569,14 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) if (use_hw_sample_counter(cmd)) bits |= ADC_SAMPLE_COUNTER_EN_BIT; writew(bits, devpriv->main_iobase + ADC_CONTROL0_REG); - DEBUG_PRINT("control0 bits 0x%x\n", bits); devpriv->ai_cmd_running = 1; spin_unlock_irqrestore(&dev->spinlock, flags); /* start acquisition */ - if (cmd->start_src == TRIG_NOW) { + if (cmd->start_src == TRIG_NOW) writew(0, devpriv->main_iobase + ADC_START_REG); - DEBUG_PRINT("soft trig\n"); - } return 0; } @@ -2690,10 +2611,6 @@ static void pio_drain_ai_fifo_16(struct comedi_device *dev) read_segment = adc_upper_read_ptr_code(prepost_bits); write_segment = adc_upper_write_ptr_code(prepost_bits); - DEBUG_PRINT(" rd seg %i, wrt seg %i, rd idx %i, wrt idx %i\n", - read_segment, write_segment, read_index, - write_index); - if (read_segment != write_segment) num_samples = devpriv->ai_fifo_segment_length - read_index; @@ -2715,8 +2632,6 @@ static void pio_drain_ai_fifo_16(struct comedi_device *dev) break; } - DEBUG_PRINT(" read %i samples from fifo\n", num_samples); - for (i = 0; i < num_samples; i++) { cfc_write_to_buffer(s, readw(devpriv->main_iobase + @@ -2812,11 +2727,6 @@ static void drain_dma_buffers(struct comedi_device *dev, unsigned int channel) num_samples * sizeof(uint16_t)); devpriv->ai_dma_index = (devpriv->ai_dma_index + 1) % ai_dma_ring_count(thisboard); - - DEBUG_PRINT("next buffer addr 0x%lx\n", - (unsigned long)devpriv-> - ai_buffer_bus_addr[devpriv->ai_dma_index]); - DEBUG_PRINT("pci addr reg 0x%x\n", next_transfer_addr); } /* XXX check for dma ring buffer overrun * (use end-of-chain bit to mark last unused buffer) */ @@ -2845,24 +2755,17 @@ static void handle_ai_interrupt(struct comedi_device *dev, if (plx_status & ICS_DMA1_A) { /* dma chan 1 interrupt */ writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT, devpriv->plx9080_iobase + PLX_DMA1_CS_REG); - DEBUG_PRINT("dma1 status 0x%x\n", dma1_status); if (dma1_status & PLX_DMA_EN_BIT) drain_dma_buffers(dev, 1); - - DEBUG_PRINT(" cleared dma ch1 interrupt\n"); } spin_unlock_irqrestore(&dev->spinlock, flags); - if (status & ADC_DONE_BIT) - DEBUG_PRINT("adc done interrupt\n"); - /* drain fifo with pio */ if ((status & ADC_DONE_BIT) || ((cmd->flags & TRIG_WAKE_EOS) && (status & ADC_INTR_PENDING_BIT) && (thisboard->layout != LAYOUT_4020))) { - DEBUG_PRINT("pio fifo drain\n"); spin_lock_irqsave(&dev->spinlock, flags); if (devpriv->ai_cmd_running) { spin_unlock_irqrestore(&dev->spinlock, flags); @@ -2947,7 +2850,6 @@ static void restart_ao_dma(struct comedi_device *dev) dma_desc_bits = readl(devpriv->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG); dma_desc_bits &= ~PLX_END_OF_CHAIN_BIT; - DEBUG_PRINT("restarting ao dma, descriptor reg 0x%x\n", dma_desc_bits); load_first_dma_descriptor(dev, 0, dma_desc_bits); dma_start_sync(dev, 0); @@ -2963,10 +2865,6 @@ static unsigned int load_ao_dma_buffer(struct comedi_device *dev, buffer_index = devpriv->ao_dma_index; prev_buffer_index = prev_ao_dma_index(dev); - DEBUG_PRINT("attempting to load ao buffer %i (0x%llx)\n", buffer_index, - (unsigned long long)devpriv->ao_buffer_bus_addr[ - buffer_index]); - num_bytes = comedi_buf_read_n_available(dev->write_subdev->async); if (num_bytes > DMA_BUFFER_SIZE) num_bytes = DMA_BUFFER_SIZE; @@ -2977,8 +2875,6 @@ static unsigned int load_ao_dma_buffer(struct comedi_device *dev, if (num_bytes == 0) return 0; - DEBUG_PRINT("loading %i bytes\n", num_bytes); - num_bytes = cfc_read_array_from_buffer(dev->write_subdev, devpriv-> ao_buffer[buffer_index], @@ -3052,14 +2948,12 @@ static void handle_ao_interrupt(struct comedi_device *dev, writeb(PLX_CLEAR_DMA_INTR_BIT, devpriv->plx9080_iobase + PLX_DMA0_CS_REG); spin_unlock_irqrestore(&dev->spinlock, flags); - DEBUG_PRINT("dma0 status 0x%x\n", dma0_status); if (dma0_status & PLX_DMA_EN_BIT) { load_ao_dma(dev, cmd); /* try to recover from dma end-of-chain event */ if (ao_dma_needs_restart(dev, dma0_status)) restart_ao_dma(dev); } - DEBUG_PRINT(" cleared dma ch0 interrupt\n"); } else { spin_unlock_irqrestore(&dev->spinlock, flags); } @@ -3068,12 +2962,6 @@ static void handle_ao_interrupt(struct comedi_device *dev, async->events |= COMEDI_CB_EOA; if (ao_stopped_by_error(dev, cmd)) async->events |= COMEDI_CB_ERROR; - DEBUG_PRINT("plx dma0 desc reg 0x%x\n", - readl(devpriv->plx9080_iobase + - PLX_DMA0_DESCRIPTOR_REG)); - DEBUG_PRINT("plx dma0 address reg 0x%x\n", - readl(devpriv->plx9080_iobase + - PLX_DMA0_PCI_ADDRESS_REG)); } cfc_handle_events(dev, s); } @@ -3089,15 +2977,12 @@ static irqreturn_t handle_interrupt(int irq, void *d) plx_status = readl(devpriv->plx9080_iobase + PLX_INTRCS_REG); status = readw(devpriv->main_iobase + HW_STATUS_REG); - DEBUG_PRINT("hw status 0x%x, plx status 0x%x\n", status, plx_status); - /* an interrupt before all the postconfig stuff gets done could * cause a NULL dereference if we continue through the * interrupt handler */ - if (!dev->attached) { - DEBUG_PRINT("premature interrupt, ignoring\n"); + if (!dev->attached) return IRQ_HANDLED; - } + handle_ai_interrupt(dev, status, plx_status); handle_ao_interrupt(dev, status, plx_status); @@ -3105,11 +2990,8 @@ static irqreturn_t handle_interrupt(int irq, void *d) if (plx_status & ICS_LDIA) { /* clear local doorbell interrupt */ plx_bits = readl(devpriv->plx9080_iobase + PLX_DBR_OUT_REG); writel(plx_bits, devpriv->plx9080_iobase + PLX_DBR_OUT_REG); - DEBUG_PRINT(" cleared local doorbell bits 0x%x\n", plx_bits); } - DEBUG_PRINT("exiting handler\n"); - return IRQ_HANDLED; } @@ -3130,7 +3012,6 @@ static int ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s) abort_dma(dev, 1); - DEBUG_PRINT("ai canceled\n"); return 0; } @@ -3458,7 +3339,6 @@ static int dio_callback(int dir, int port, int data, unsigned long arg) void __iomem *iobase = (void __iomem *)arg; if (dir) { writeb(data, iobase + port); - DEBUG_PRINT("wrote 0x%x to port %i\n", data, port); return 0; } else { return readb(iobase + port); @@ -4046,11 +3926,6 @@ static int auto_attach(struct comedi_device *dev, return -ENOMEM; } - DEBUG_PRINT(" plx9080 remapped to 0x%p\n", devpriv->plx9080_iobase); - DEBUG_PRINT(" main remapped to 0x%p\n", devpriv->main_iobase); - DEBUG_PRINT(" diocounter remapped to 0x%p\n", - devpriv->dio_counter_iobase); - /* figure out what local addresses are */ local_range = readl(devpriv->plx9080_iobase + PLX_LAS0RNG_REG) & LRNG_MEM_MASK; @@ -4065,9 +3940,6 @@ static int auto_attach(struct comedi_device *dev, devpriv->local1_iobase = ((uint32_t)devpriv->dio_counter_phys_iobase & ~local_range) | local_decode; - DEBUG_PRINT(" local 0 io addr 0x%x\n", devpriv->local0_iobase); - DEBUG_PRINT(" local 1 io addr 0x%x\n", devpriv->local1_iobase); - retval = alloc_and_init_dma_members(dev); if (retval < 0) return retval; @@ -4161,7 +4033,7 @@ static int cb_pcidas64_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(cb_pcidas64_pci_table) = { +static const struct pci_device_id cb_pcidas64_pci_table[] = { { PCI_VDEVICE(CB, 0x001d), BOARD_PCIDAS6402_16 }, { PCI_VDEVICE(CB, 0x001e), BOARD_PCIDAS6402_12 }, { PCI_VDEVICE(CB, 0x0035), BOARD_PCIDAS64_M1_16 }, diff --git a/drivers/staging/comedi/drivers/cb_pcidda.c b/drivers/staging/comedi/drivers/cb_pcidda.c index 94f115820279..8cca0518cfda 100644 --- a/drivers/staging/comedi/drivers/cb_pcidda.c +++ b/drivers/staging/comedi/drivers/cb_pcidda.c @@ -407,7 +407,7 @@ static int cb_pcidda_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(cb_pcidda_pci_table) = { +static const struct pci_device_id cb_pcidda_pci_table[] = { { PCI_VDEVICE(CB, 0x0020), BOARD_DDA02_12 }, { PCI_VDEVICE(CB, 0x0021), BOARD_DDA04_12 }, { PCI_VDEVICE(CB, 0x0022), BOARD_DDA08_12 }, diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c index 30520d4c16a6..57295d189ff6 100644 --- a/drivers/staging/comedi/drivers/cb_pcimdas.c +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c @@ -44,9 +44,6 @@ See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details. #include "plx9052.h" #include "8255.h" -/* #define CBPCIMDAS_DEBUG */ -#undef CBPCIMDAS_DEBUG - /* Registers for the PCIM-DAS1602/16 */ /* sizes of io regions (bytes) */ @@ -145,10 +142,9 @@ static int cb_pcimdas_ai_rinsn(struct comedi_device *dev, if (!busy) break; } - if (i == TIMEOUT) { - printk("timeout\n"); + if (i == TIMEOUT) return -ETIMEDOUT; - } + /* read data */ data[n] = inw(dev->iobase + 0); } @@ -222,15 +218,6 @@ static int cb_pcimdas_auto_attach(struct comedi_device *dev, devpriv->BADR3 = pci_resource_start(pcidev, 3); iobase_8255 = pci_resource_start(pcidev, 4); -/* Dont support IRQ yet */ -/* get irq */ -/* if(request_irq(pcidev->irq, cb_pcimdas_interrupt, IRQF_SHARED, "cb_pcimdas", dev )) */ -/* { */ -/* printk(" unable to allocate irq %u\n", pcidev->irq); */ -/* return -EINVAL; */ -/* } */ -/* dev->irq = pcidev->irq; */ - ret = comedi_alloc_subdevices(dev, 3); if (ret) return ret; @@ -288,7 +275,7 @@ static int cb_pcimdas_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(cb_pcimdas_pci_table) = { +static const struct pci_device_id cb_pcimdas_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0056) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/cb_pcimdda.c b/drivers/staging/comedi/drivers/cb_pcimdda.c index edf17b63096f..43a86630a66e 100644 --- a/drivers/staging/comedi/drivers/cb_pcimdda.c +++ b/drivers/staging/comedi/drivers/cb_pcimdda.c @@ -206,7 +206,7 @@ static int cb_pcimdda_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(cb_pcimdda_pci_table) = { +static const struct pci_device_id cb_pcimdda_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_CB, PCI_ID_PCIM_DDA06_16) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/comedi_test.c b/drivers/staging/comedi/drivers/comedi_test.c index 16c07802107f..d539eaf53b63 100644 --- a/drivers/staging/comedi/drivers/comedi_test.c +++ b/drivers/staging/comedi/drivers/comedi_test.c @@ -74,11 +74,10 @@ static const int nano_per_micro = 1000; /* fake analog input ranges */ static const struct comedi_lrange waveform_ai_ranges = { - 2, - { - BIP_RANGE(10), - BIP_RANGE(5), - } + 2, { + BIP_RANGE(10), + BIP_RANGE(5) + } }; static unsigned short fake_sawtooth(struct comedi_device *dev, diff --git a/drivers/staging/comedi/drivers/contec_pci_dio.c b/drivers/staging/comedi/drivers/contec_pci_dio.c index 89836c0828d9..323a7f39cd97 100644 --- a/drivers/staging/comedi/drivers/contec_pci_dio.c +++ b/drivers/staging/comedi/drivers/contec_pci_dio.c @@ -111,7 +111,7 @@ static int contec_pci_dio_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(contec_pci_dio_pci_table) = { +static const struct pci_device_id contec_pci_dio_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_CONTEC, PCI_DEVICE_ID_PIO1616L) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c index de920ccff400..ce153fcb8b2a 100644 --- a/drivers/staging/comedi/drivers/daqboard2000.c +++ b/drivers/staging/comedi/drivers/daqboard2000.c @@ -772,7 +772,7 @@ static int daqboard2000_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(daqboard2000_pci_table) = { +static const struct pci_device_id daqboard2000_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_IOTECH, 0x0409) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c index 15dd33e3e1c7..e5c0ee9a09c2 100644 --- a/drivers/staging/comedi/drivers/das08.c +++ b/drivers/staging/comedi/drivers/das08.c @@ -120,46 +120,49 @@ /* gainlist same as _pgx_ below */ -static const struct comedi_lrange range_das08_pgl = { 9, { - BIP_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - BIP_RANGE(0.625), - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2.5), - UNI_RANGE(1.25) - } +static const struct comedi_lrange range_das08_pgl = { + 9, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) + } }; -static const struct comedi_lrange range_das08_pgh = { 12, { - BIP_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(1), - BIP_RANGE(0.5), - BIP_RANGE(0.1), - BIP_RANGE(0.05), - BIP_RANGE(0.01), - BIP_RANGE(0.005), - UNI_RANGE(10), - UNI_RANGE(1), - UNI_RANGE(0.1), - UNI_RANGE(0.01), - } +static const struct comedi_lrange range_das08_pgh = { + 12, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(1), + BIP_RANGE(0.5), + BIP_RANGE(0.1), + BIP_RANGE(0.05), + BIP_RANGE(0.01), + BIP_RANGE(0.005), + UNI_RANGE(10), + UNI_RANGE(1), + UNI_RANGE(0.1), + UNI_RANGE(0.01) + } }; -static const struct comedi_lrange range_das08_pgm = { 9, { - BIP_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(0.5), - BIP_RANGE(0.05), - BIP_RANGE(0.01), - UNI_RANGE(10), - UNI_RANGE(1), - UNI_RANGE(0.1), - UNI_RANGE(0.01) - } +static const struct comedi_lrange range_das08_pgm = { + 9, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(0.5), + BIP_RANGE(0.05), + BIP_RANGE(0.01), + UNI_RANGE(10), + UNI_RANGE(1), + UNI_RANGE(0.1), + UNI_RANGE(0.01) + } }; /* cio-das08jr.pdf diff --git a/drivers/staging/comedi/drivers/das08_pci.c b/drivers/staging/comedi/drivers/das08_pci.c index 3a6d3725b25f..d94af09151b0 100644 --- a/drivers/staging/comedi/drivers/das08_pci.c +++ b/drivers/staging/comedi/drivers/das08_pci.c @@ -89,7 +89,7 @@ static int das08_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(das08_pci_table) = { +static const struct pci_device_id das08_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_CB, PCI_DEVICE_ID_PCIDAS08) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/das16m1.c b/drivers/staging/comedi/drivers/das16m1.c index fce9acfe8084..fee5facff8dd 100644 --- a/drivers/staging/comedi/drivers/das16m1.c +++ b/drivers/staging/comedi/drivers/das16m1.c @@ -110,18 +110,18 @@ irq can be omitted, although the cmd interface will not work without it. #define DAS16M1_82C55 0x400 #define DAS16M1_8254_THIRD 0x404 -static const struct comedi_lrange range_das16m1 = { 9, - { - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - BIP_RANGE(0.625), - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2.5), - UNI_RANGE(1.25), - BIP_RANGE(10), - } +static const struct comedi_lrange range_das16m1 = { + 9, { + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25), + BIP_RANGE(10) + } }; struct das16m1_private_struct { @@ -269,11 +269,6 @@ static int das16m1_cmd_exec(struct comedi_device *dev, struct comedi_cmd *cmd = &async->cmd; unsigned int byte, i; - if (dev->irq == 0) { - comedi_error(dev, "irq required to execute comedi_cmd"); - return -1; - } - /* disable interrupts and internal pacer */ devpriv->control_state &= ~INTE & ~PACER_MASK; outb(devpriv->control_state, dev->iobase + DAS16M1_INTR_CONTROL); @@ -508,38 +503,26 @@ static irqreturn_t das16m1_interrupt(int irq, void *d) static int das16m1_irq_bits(unsigned int irq) { - int ret; - switch (irq) { case 10: - ret = 0x0; - break; + return 0x0; case 11: - ret = 0x1; - break; + return 0x1; case 12: - ret = 0x2; - break; + return 0x2; case 15: - ret = 0x3; - break; + return 0x3; case 2: - ret = 0x4; - break; + return 0x4; case 3: - ret = 0x5; - break; + return 0x5; case 5: - ret = 0x6; - break; + return 0x6; case 7: - ret = 0x7; - break; + return 0x7; default: - return -1; - break; + return 0x0; } - return ret << 4; } /* @@ -553,7 +536,6 @@ static int das16m1_attach(struct comedi_device *dev, struct das16m1_private_struct *devpriv; struct comedi_subdevice *s; int ret; - unsigned int irq; devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv)); if (!devpriv) @@ -569,24 +551,12 @@ static int das16m1_attach(struct comedi_device *dev, return ret; devpriv->extra_iobase = dev->iobase + DAS16M1_82C55; - /* now for the irq */ - irq = it->options[1]; - /* make sure it is valid */ - if (das16m1_irq_bits(irq) >= 0) { - ret = request_irq(irq, das16m1_interrupt, 0, - dev->driver->driver_name, dev); - if (ret < 0) - return ret; - dev->irq = irq; - printk - ("irq %u\n", irq); - } else if (irq == 0) { - printk - (", no irq\n"); - } else { - comedi_error(dev, "invalid irq\n" - " valid irqs are 2, 3, 5, 7, 10, 11, 12, or 15\n"); - return -EINVAL; + /* only irqs 2, 3, 4, 5, 6, 7, 10, 11, 12, 14, and 15 are valid */ + if ((1 << it->options[1]) & 0xdcfc) { + ret = request_irq(it->options[1], das16m1_interrupt, 0, + dev->board_name, dev); + if (ret == 0) + dev->irq = it->options[1]; } ret = comedi_alloc_subdevices(dev, 4); @@ -594,20 +564,22 @@ static int das16m1_attach(struct comedi_device *dev, return ret; s = &dev->subdevices[0]; - dev->read_subdev = s; /* ai */ s->type = COMEDI_SUBD_AI; - s->subdev_flags = SDF_READABLE | SDF_CMD_READ; + s->subdev_flags = SDF_READABLE | SDF_DIFF; s->n_chan = 8; - s->subdev_flags = SDF_DIFF; - s->len_chanlist = 256; s->maxdata = (1 << 12) - 1; s->range_table = &range_das16m1; s->insn_read = das16m1_ai_rinsn; - s->do_cmdtest = das16m1_cmd_test; - s->do_cmd = das16m1_cmd_exec; - s->cancel = das16m1_cancel; - s->poll = das16m1_poll; + if (dev->irq) { + dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; + s->len_chanlist = 256; + s->do_cmdtest = das16m1_cmd_test; + s->do_cmd = das16m1_cmd_exec; + s->cancel = das16m1_cancel; + s->poll = das16m1_poll; + } s = &dev->subdevices[1]; /* di */ @@ -640,10 +612,7 @@ static int das16m1_attach(struct comedi_device *dev, outb(0, dev->iobase + DAS16M1_DIO); /* set the interrupt level */ - if (dev->irq) - devpriv->control_state = das16m1_irq_bits(dev->irq); - else - devpriv->control_state = 0; + devpriv->control_state = das16m1_irq_bits(dev->irq) << 4; outb(devpriv->control_state, dev->iobase + DAS16M1_INTR_CONTROL); return 0; diff --git a/drivers/staging/comedi/drivers/das1800.c b/drivers/staging/comedi/drivers/das1800.c index 1880038956d0..320d95a5f47b 100644 --- a/drivers/staging/comedi/drivers/das1800.c +++ b/drivers/staging/comedi/drivers/das1800.c @@ -178,31 +178,29 @@ enum { /* analog input ranges */ static const struct comedi_lrange range_ai_das1801 = { - 8, - { - RANGE(-5, 5), - RANGE(-1, 1), - RANGE(-0.1, 0.1), - RANGE(-0.02, 0.02), - RANGE(0, 5), - RANGE(0, 1), - RANGE(0, 0.1), - RANGE(0, 0.02), - } + 8, { + BIP_RANGE(5), + BIP_RANGE(1), + BIP_RANGE(0.1), + BIP_RANGE(0.02), + UNI_RANGE(5), + UNI_RANGE(1), + UNI_RANGE(0.1), + UNI_RANGE(0.02) + } }; static const struct comedi_lrange range_ai_das1802 = { - 8, - { - RANGE(-10, 10), - RANGE(-5, 5), - RANGE(-2.5, 2.5), - RANGE(-1.25, 1.25), - RANGE(0, 10), - RANGE(0, 5), - RANGE(0, 2.5), - RANGE(0, 1.25), - } + 8, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) + } }; struct das1800_board { @@ -445,10 +443,9 @@ struct das1800_private { /* analog out range for 'ao' boards */ /* static const struct comedi_lrange range_ao_2 = { - 2, - { - RANGE(-10, 10), - RANGE(-5, 5), + 2, { + BIP_RANGE(10), + BIP_RANGE(5) } }; */ @@ -462,7 +459,7 @@ static inline uint16_t munge_bipolar_sample(const struct comedi_device *dev, return sample; } -static void munge_data(struct comedi_device *dev, uint16_t * array, +static void munge_data(struct comedi_device *dev, uint16_t *array, unsigned int num_elements) { unsigned int i; @@ -644,7 +641,7 @@ static int das1800_cancel(struct comedi_device *dev, struct comedi_subdevice *s) static void das1800_ai_handler(struct comedi_device *dev) { struct das1800_private *devpriv = dev->private; - struct comedi_subdevice *s = &dev->subdevices[0]; + struct comedi_subdevice *s = dev->read_subdev; struct comedi_async *async = s->async; struct comedi_cmd *cmd = &async->cmd; unsigned int status = inb(dev->iobase + DAS1800_STATUS); @@ -1150,12 +1147,6 @@ static int das1800_ai_do_cmd(struct comedi_device *dev, struct comedi_async *async = s->async; const struct comedi_cmd *cmd = &async->cmd; - if (!dev->irq) { - comedi_error(dev, - "no irq assigned for das-1800, cannot do hardware conversions"); - return -1; - } - /* disable dma on TRIG_WAKE_EOS, or TRIG_RT * (because dma in handler is unsafe at hard real-time priority) */ if (cmd->flags & (TRIG_WAKE_EOS | TRIG_RT)) @@ -1522,43 +1513,34 @@ static int das1800_attach(struct comedi_device *dev, devpriv->iobase2 = iobase2; } - /* grab our IRQ */ - if (irq) { - if (request_irq(irq, das1800_interrupt, 0, - dev->driver->driver_name, dev)) { - dev_dbg(dev->class_dev, "unable to allocate irq %u\n", - irq); - return -EINVAL; - } - } - dev->irq = irq; + if (irq == 3 || irq == 5 || irq == 7 || irq == 10 || irq == 11 || + irq == 15) { + ret = request_irq(irq, das1800_interrupt, 0, + dev->board_name, dev); + if (ret == 0) { + dev->irq = irq; - /* set bits that tell card which irq to use */ - switch (irq) { - case 0: - break; - case 3: - devpriv->irq_dma_bits |= 0x8; - break; - case 5: - devpriv->irq_dma_bits |= 0x10; - break; - case 7: - devpriv->irq_dma_bits |= 0x18; - break; - case 10: - devpriv->irq_dma_bits |= 0x28; - break; - case 11: - devpriv->irq_dma_bits |= 0x30; - break; - case 15: - devpriv->irq_dma_bits |= 0x38; - break; - default: - dev_err(dev->class_dev, "irq out of range\n"); - return -EINVAL; - break; + switch (irq) { + case 3: + devpriv->irq_dma_bits |= 0x8; + break; + case 5: + devpriv->irq_dma_bits |= 0x10; + break; + case 7: + devpriv->irq_dma_bits |= 0x18; + break; + case 10: + devpriv->irq_dma_bits |= 0x28; + break; + case 11: + devpriv->irq_dma_bits |= 0x30; + break; + case 15: + devpriv->irq_dma_bits |= 0x38; + break; + } + } } ret = das1800_init_dma(dev, dma0, dma1); @@ -1578,20 +1560,23 @@ static int das1800_attach(struct comedi_device *dev, /* analog input subdevice */ s = &dev->subdevices[0]; - dev->read_subdev = s; s->type = COMEDI_SUBD_AI; - s->subdev_flags = SDF_READABLE | SDF_DIFF | SDF_GROUND | SDF_CMD_READ; + s->subdev_flags = SDF_READABLE | SDF_DIFF | SDF_GROUND; if (thisboard->common) s->subdev_flags |= SDF_COMMON; s->n_chan = thisboard->qram_len; - s->len_chanlist = thisboard->qram_len; s->maxdata = (1 << thisboard->resolution) - 1; s->range_table = thisboard->range_ai; - s->do_cmd = das1800_ai_do_cmd; - s->do_cmdtest = das1800_ai_do_cmdtest; s->insn_read = das1800_ai_rinsn; - s->poll = das1800_ai_poll; - s->cancel = das1800_cancel; + if (dev->irq) { + dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; + s->len_chanlist = s->n_chan; + s->do_cmd = das1800_ai_do_cmd; + s->do_cmdtest = das1800_ai_do_cmdtest; + s->poll = das1800_ai_poll; + s->cancel = das1800_cancel; + } /* analog out */ s = &dev->subdevices[1]; diff --git a/drivers/staging/comedi/drivers/das6402.c b/drivers/staging/comedi/drivers/das6402.c index fb25cb847032..43027ee500e3 100644 --- a/drivers/staging/comedi/drivers/das6402.c +++ b/drivers/staging/comedi/drivers/das6402.c @@ -152,21 +152,12 @@ static irqreturn_t intr_handler(int irq, void *d) dev_warn(dev->class_dev, "BUG: spurious interrupt\n"); return IRQ_HANDLED; } -#ifdef DEBUG - printk("das6402: interrupt! das6402_irqcount=%i\n", - devpriv->das6402_irqcount); - printk("das6402: iobase+2=%i\n", inw_p(dev->iobase + 2)); -#endif das6402_ai_fifo_dregs(dev, s); if (s->async->buf_write_count >= devpriv->ai_bytes_to_read) { outw_p(SCANL, dev->iobase + 2); /* clears the fifo */ outb(0x07, dev->iobase + 8); /* clears all flip-flops */ -#ifdef DEBUG - printk("das6402: Got %i samples\n\n", - devpriv->das6402_wordsread - diff); -#endif s->async->events |= COMEDI_CB_EOA; comedi_event(dev, s); } @@ -211,7 +202,7 @@ static int das6402_ai_cancel(struct comedi_device *dev, #ifdef unused static int das6402_ai_mode2(struct comedi_device *dev, - struct comedi_subdevice *s, comedi_trig * it) + struct comedi_subdevice *s, comedi_trig *it) { struct das6402_private *devpriv = dev->private; diff --git a/drivers/staging/comedi/drivers/dmm32at.c b/drivers/staging/comedi/drivers/dmm32at.c index b04a5633f754..78a19629ff56 100644 --- a/drivers/staging/comedi/drivers/dmm32at.c +++ b/drivers/staging/comedi/drivers/dmm32at.c @@ -124,13 +124,12 @@ Configuration Options: /* board AI ranges in comedi structure */ static const struct comedi_lrange dmm32at_airanges = { - 4, - { - UNI_RANGE(10), - UNI_RANGE(5), - BIP_RANGE(10), - BIP_RANGE(5), - } + 4, { + UNI_RANGE(10), + UNI_RANGE(5), + BIP_RANGE(10), + BIP_RANGE(5) + } }; /* register values for above ranges */ @@ -145,13 +144,12 @@ static const unsigned char dmm32at_rangebits[] = { * board. The application should only use the range set by the jumper */ static const struct comedi_lrange dmm32at_aoranges = { - 4, - { - UNI_RANGE(10), - UNI_RANGE(5), - BIP_RANGE(10), - BIP_RANGE(5), - } + 4, { + UNI_RANGE(10), + UNI_RANGE(5), + BIP_RANGE(10), + BIP_RANGE(5) + } }; struct dmm32at_private { @@ -182,8 +180,6 @@ static int dmm32at_ai_rinsn(struct comedi_device *dev, chan = CR_CHAN(insn->chanspec) & (s->n_chan - 1); range = CR_RANGE(insn->chanspec); - /* printk("channel=0x%02x, range=%d\n",chan,range); */ - /* zero scan and fifo control and reset fifo */ outb(DMM32AT_FIFORESET, dev->iobase + DMM32AT_FIFOCNTRL); @@ -199,10 +195,8 @@ static int dmm32at_ai_rinsn(struct comedi_device *dev, if ((status & DMM32AT_STATUS) == 0) break; } - if (i == 40000) { - printk(KERN_WARNING "dmm32at: timeout\n"); + if (i == 40000) return -ETIMEDOUT; - } /* convert n samples */ for (n = 0; n < insn->n; n++) { @@ -214,10 +208,8 @@ static int dmm32at_ai_rinsn(struct comedi_device *dev, if ((status & DMM32AT_STATUS) == 0) break; } - if (i == 40000) { - printk(KERN_WARNING "dmm32at: timeout\n"); + if (i == 40000) return -ETIMEDOUT; - } /* read data */ lsb = inb(dev->iobase + DMM32AT_AILSB); @@ -453,10 +445,8 @@ static int dmm32at_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) if ((status & DMM32AT_STATUS) == 0) break; } - if (i == 40000) { - printk(KERN_WARNING "dmm32at: timeout\n"); + if (i == 40000) return -ETIMEDOUT; - } if (devpriv->ai_scans_left > 1) { /* start the clock and enable the interrupts */ @@ -467,8 +457,6 @@ static int dmm32at_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) outb(0xff, dev->iobase + DMM32AT_CONV); } -/* printk("dmmat32 in command\n"); */ - /* for(i=0;i<cmd->chanlist_len;i++) */ /* comedi_buf_put(s->async,i*100); */ @@ -556,7 +544,6 @@ static int dmm32at_ao_winsn(struct comedi_device *dev, lo = data[i] & 0x00ff; /* high byte also contains channel number */ hi = (data[i] >> 8) + chan * (1 << 6); - /* printk("writing 0x%02x 0x%02x\n",hi,lo); */ /* write the low and high values to the board */ outb(lo, dev->iobase + DMM32AT_DACLSB); outb(hi, dev->iobase + DMM32AT_DACMSB); @@ -567,10 +554,9 @@ static int dmm32at_ao_winsn(struct comedi_device *dev, if ((status & DMM32AT_DACBUSY) == 0) break; } - if (i == 40000) { - printk(KERN_WARNING "dmm32at: timeout\n"); + if (i == 40000) return -ETIMEDOUT; - } + /* dummy read to update trigger the output */ status = inb(dev->iobase + DMM32AT_DACMSB); @@ -682,9 +668,6 @@ static int dmm32at_attach(struct comedi_device *dev, int ret; struct comedi_subdevice *s; unsigned char aihi, ailo, fifostat, aistat, intstat, airback; - unsigned int irq; - - irq = it->options[1]; ret = comedi_request_region(dev, it->options[0], DMM32AT_MEMSIZE); if (ret) @@ -723,26 +706,17 @@ static int dmm32at_attach(struct comedi_device *dev, intstat = inb(dev->iobase + DMM32AT_INTCLOCK); airback = inb(dev->iobase + DMM32AT_AIRBACK); - printk(KERN_DEBUG "dmm32at: lo=0x%02x hi=0x%02x fifostat=0x%02x\n", - ailo, aihi, fifostat); - printk(KERN_DEBUG - "dmm32at: aistat=0x%02x intstat=0x%02x airback=0x%02x\n", - aistat, intstat, airback); - if ((ailo != 0x00) || (aihi != 0x1f) || (fifostat != 0x80) || (aistat != 0x60 || (intstat != 0x00) || airback != 0x0c)) { - printk(KERN_ERR "dmmat32: board detection failed\n"); + dev_err(dev->class_dev, "board detection failed\n"); return -EIO; } - /* board is there, register interrupt */ - if (irq) { - ret = request_irq(irq, dmm32at_isr, 0, dev->board_name, dev); - if (ret < 0) { - printk(KERN_ERR "dmm32at: irq conflict\n"); - return ret; - } - dev->irq = irq; + if (it->options[1]) { + ret = request_irq(it->options[1], dmm32at_isr, 0, + dev->board_name, dev); + if (ret == 0) + dev->irq = it->options[1]; } devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv)); @@ -754,20 +728,22 @@ static int dmm32at_attach(struct comedi_device *dev, return ret; s = &dev->subdevices[0]; - dev->read_subdev = s; /* analog input subdevice */ s->type = COMEDI_SUBD_AI; /* we support single-ended (ground) and differential */ - s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF | SDF_CMD_READ; + s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF; s->n_chan = 32; s->maxdata = 0xffff; s->range_table = &dmm32at_airanges; - s->len_chanlist = 32; /* This is the maximum chanlist length that - the board can handle */ s->insn_read = dmm32at_ai_rinsn; - s->do_cmd = dmm32at_ai_cmd; - s->do_cmdtest = dmm32at_ai_cmdtest; - s->cancel = dmm32at_ai_cancel; + if (dev->irq) { + dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; + s->len_chanlist = 32; + s->do_cmd = dmm32at_ai_cmd; + s->do_cmdtest = dmm32at_ai_cmdtest; + s->cancel = dmm32at_ai_cancel; + } s = &dev->subdevices[1]; /* analog output subdevice */ @@ -799,11 +775,7 @@ static int dmm32at_attach(struct comedi_device *dev, s->insn_bits = dmm32at_dio_insn_bits; s->insn_config = dmm32at_dio_insn_config; - /* success */ - printk(KERN_INFO "comedi%d: dmm32at: attached\n", dev->minor); - - return 1; - + return 0; } static struct comedi_driver dmm32at_driver = { diff --git a/drivers/staging/comedi/drivers/dt2801.c b/drivers/staging/comedi/drivers/dt2801.c index 811c8c59c017..d4d4e4b497dc 100644 --- a/drivers/staging/comedi/drivers/dt2801.c +++ b/drivers/staging/comedi/drivers/dt2801.c @@ -90,58 +90,42 @@ Configuration options: #if 0 /* ignore 'defined but not used' warning */ -static const struct comedi_lrange range_dt2801_ai_pgh_bipolar = { 4, { - RANGE(-10, - 10), - RANGE(-5, - 5), - RANGE - (-2.5, - 2.5), - RANGE - (-1.25, - 1.25), - } +static const struct comedi_lrange range_dt2801_ai_pgh_bipolar = { + 4, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25) + } }; #endif -static const struct comedi_lrange range_dt2801_ai_pgl_bipolar = { 4, { - RANGE(-10, - 10), - RANGE(-1, - 1), - RANGE - (-0.1, - 0.1), - RANGE - (-0.02, - 0.02), - } +static const struct comedi_lrange range_dt2801_ai_pgl_bipolar = { + 4, { + BIP_RANGE(10), + BIP_RANGE(1), + BIP_RANGE(0.1), + BIP_RANGE(0.02) + } }; #if 0 /* ignore 'defined but not used' warning */ -static const struct comedi_lrange range_dt2801_ai_pgh_unipolar = { 4, { - RANGE(0, - 10), - RANGE(0, - 5), - RANGE(0, - 2.5), - RANGE(0, - 1.25), - } +static const struct comedi_lrange range_dt2801_ai_pgh_unipolar = { + 4, { + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) + } }; #endif -static const struct comedi_lrange range_dt2801_ai_pgl_unipolar = { 4, { - RANGE(0, - 10), - RANGE(0, - 1), - RANGE(0, - 0.1), - RANGE(0, - 0.02), - } +static const struct comedi_lrange range_dt2801_ai_pgl_unipolar = { + 4, { + UNI_RANGE(10), + UNI_RANGE(1), + UNI_RANGE(0.1), + UNI_RANGE(0.02) + } }; struct dt2801_board { @@ -289,13 +273,6 @@ static int dt2801_writedata(struct comedi_device *dev, unsigned int data) outb_p(data & 0xff, dev->iobase + DT2801_DATA); return 0; } -#if 0 - if (stat & DT_S_READY) { - printk - ("dt2801: ready flag set (bad!) in dt2801_writedata()\n"); - return -EIO; - } -#endif } while (--timeout > 0); return -ETIME; @@ -343,11 +320,11 @@ static int dt2801_writecmd(struct comedi_device *dev, int command) stat = inb_p(dev->iobase + DT2801_STATUS); if (stat & DT_S_COMPOSITE_ERROR) { - printk - ("dt2801: composite-error in dt2801_writecmd(), ignoring\n"); + dev_dbg(dev->class_dev, + "composite-error in %s, ignoring\n", __func__); } if (!(stat & DT_S_READY)) - printk("dt2801: !ready in dt2801_writecmd(), ignoring\n"); + dev_dbg(dev->class_dev, "!ready in %s, ignoring\n", __func__); outb_p(command, dev->iobase + DT2801_CMD); return 0; @@ -359,17 +336,12 @@ static int dt2801_reset(struct comedi_device *dev) unsigned int stat; int timeout; - DPRINTK("dt2801: resetting board...\n"); - DPRINTK("fingerprint: 0x%02x 0x%02x\n", inb_p(dev->iobase), - inb_p(dev->iobase + 1)); - /* pull random data from data port */ inb_p(dev->iobase + DT2801_DATA); inb_p(dev->iobase + DT2801_DATA); inb_p(dev->iobase + DT2801_DATA); inb_p(dev->iobase + DT2801_DATA); - DPRINTK("dt2801: stop\n"); /* dt2801_writecmd(dev,DT_C_STOP); */ outb_p(DT_C_STOP, dev->iobase + DT2801_CMD); @@ -382,12 +354,10 @@ static int dt2801_reset(struct comedi_device *dev) break; } while (timeout--); if (!timeout) - printk("dt2801: timeout 1 status=0x%02x\n", stat); + dev_dbg(dev->class_dev, "timeout 1 status=0x%02x\n", stat); - /* printk("dt2801: reading dummy\n"); */ /* dt2801_readdata(dev,&board_code); */ - DPRINTK("dt2801: reset\n"); outb_p(DT_C_RESET, dev->iobase + DT2801_CMD); /* dt2801_writecmd(dev,DT_C_RESET); */ @@ -399,13 +369,10 @@ static int dt2801_reset(struct comedi_device *dev) break; } while (timeout--); if (!timeout) - printk("dt2801: timeout 2 status=0x%02x\n", stat); + dev_dbg(dev->class_dev, "timeout 2 status=0x%02x\n", stat); - DPRINTK("dt2801: reading code\n"); dt2801_readdata(dev, &board_code); - DPRINTK("dt2801: ok. code=0x%02x\n", board_code); - return board_code; } @@ -465,12 +432,12 @@ static int dt2801_error(struct comedi_device *dev, int stat) { if (stat < 0) { if (stat == -ETIME) - printk("dt2801: timeout\n"); + dev_dbg(dev->class_dev, "timeout\n"); else - printk("dt2801: error %d\n", stat); + dev_dbg(dev->class_dev, "error %d\n", stat); return stat; } - printk("dt2801: error status 0x%02x, resetting...\n", stat); + dev_dbg(dev->class_dev, "error status 0x%02x, resetting...\n", stat); dt2801_reset(dev); dt2801_reset(dev); @@ -601,8 +568,8 @@ static int dt2801_attach(struct comedi_device *dev, struct comedi_devconfig *it) if (boardtypes[type].boardcode == board_code) goto havetype; } - printk("dt2801: unrecognized board code=0x%02x, contact author\n", - board_code); + dev_dbg(dev->class_dev, + "unrecognized board code=0x%02x, contact author\n", board_code); type = 0; havetype: diff --git a/drivers/staging/comedi/drivers/dt2811.c b/drivers/staging/comedi/drivers/dt2811.c index 0ca02fa7ba1b..4271903facd7 100644 --- a/drivers/staging/comedi/drivers/dt2811.c +++ b/drivers/staging/comedi/drivers/dt2811.c @@ -42,60 +42,59 @@ Configuration options: */ #include <linux/module.h> -#include <linux/interrupt.h> #include "../comedidev.h" static const struct comedi_lrange range_dt2811_pgh_ai_5_unipolar = { 4, { - RANGE(0, 5), - RANGE(0, 2.5), - RANGE(0, 1.25), - RANGE(0, 0.625) + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25), + UNI_RANGE(0.625) } }; static const struct comedi_lrange range_dt2811_pgh_ai_2_5_bipolar = { 4, { - RANGE(-2.5, 2.5), - RANGE(-1.25, 1.25), - RANGE(-0.625, 0.625), - RANGE(-0.3125, 0.3125) + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625), + BIP_RANGE(0.3125) } }; static const struct comedi_lrange range_dt2811_pgh_ai_5_bipolar = { 4, { - RANGE(-5, 5), - RANGE(-2.5, 2.5), - RANGE(-1.25, 1.25), - RANGE(-0.625, 0.625) + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625) } }; static const struct comedi_lrange range_dt2811_pgl_ai_5_unipolar = { 4, { - RANGE(0, 5), - RANGE(0, 0.5), - RANGE(0, 0.05), - RANGE(0, 0.01) + UNI_RANGE(5), + UNI_RANGE(0.5), + UNI_RANGE(0.05), + UNI_RANGE(0.01) } }; static const struct comedi_lrange range_dt2811_pgl_ai_2_5_bipolar = { 4, { - RANGE(-2.5, 2.5), - RANGE(-0.25, 0.25), - RANGE(-0.025, 0.025), - RANGE(-0.005, 0.005) + BIP_RANGE(2.5), + BIP_RANGE(0.25), + BIP_RANGE(0.025), + BIP_RANGE(0.005) } }; static const struct comedi_lrange range_dt2811_pgl_ai_5_bipolar = { 4, { - RANGE(-5, 5), - RANGE(-0.5, 0.5), - RANGE(-0.05, 0.05), - RANGE(-0.01, 0.01) + BIP_RANGE(5), + BIP_RANGE(0.5), + BIP_RANGE(0.05), + BIP_RANGE(0.01) } }; @@ -227,33 +226,6 @@ static const struct comedi_lrange *dac_range_types[] = { #define DT2811_TIMEOUT 5 -#if 0 -static irqreturn_t dt2811_interrupt(int irq, void *d) -{ - int lo, hi; - int data; - struct comedi_device *dev = d; - struct dt2811_private *devpriv = dev->private; - - if (!dev->attached) { - comedi_error(dev, "spurious interrupt"); - return IRQ_HANDLED; - } - - lo = inb(dev->iobase + DT2811_ADDATLO); - hi = inb(dev->iobase + DT2811_ADDATHI); - - data = lo + (hi << 8); - - if (!(--devpriv->ntrig)) { - /* how to turn off acquisition */ - s->async->events |= COMEDI_SB_EOA; - } - comedi_event(dev, s); - return IRQ_HANDLED; -} -#endif - static int dt2811_ai_insn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) { @@ -278,35 +250,6 @@ static int dt2811_ai_insn(struct comedi_device *dev, struct comedi_subdevice *s, return i; } -#if 0 -/* Wow. This is code from the Comedi stone age. But it hasn't been - * replaced, so I'll let it stay. */ -int dt2811_adtrig(kdev_t minor, comedi_adtrig *adtrig) -{ - struct comedi_device *dev = comedi_devices + minor; - - if (adtrig->n < 1) - return 0; - dev->curadchan = adtrig->chan; - switch (dev->i_admode) { - case COMEDI_MDEMAND: - dev->ntrig = adtrig->n - 1; - /* not necessary */ - /*printk("dt2811: AD soft trigger\n"); */ - /*outb(DT2811_CLRERROR|DT2811_INTENB, - dev->iobase+DT2811_ADCSR); */ - outb(dev->curadchan, dev->iobase + DT2811_ADGCR); - do_gettimeofday(&trigtime); - break; - case COMEDI_MCONTS: - dev->ntrig = adtrig->n; - break; - } - - return 0; -} -#endif - static int dt2811_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) { @@ -386,10 +329,7 @@ static int dt2811_do_insn_bits(struct comedi_device *dev, */ static int dt2811_attach(struct comedi_device *dev, struct comedi_devconfig *it) { - /* int i, irq; */ - /* unsigned long irqs; */ - /* long flags; */ - + /* int i; */ const struct dt2811_board *board = comedi_board(dev); struct dt2811_private *devpriv; int ret; @@ -406,45 +346,6 @@ static int dt2811_attach(struct comedi_device *dev, struct comedi_devconfig *it) i = inb(dev->iobase + DT2811_ADDATHI); #endif -#if 0 - irq = it->options[1]; - if (irq < 0) { - save_flags(flags); - sti(); - irqs = probe_irq_on(); - - outb(DT2811_CLRERROR | DT2811_INTENB, - dev->iobase + DT2811_ADCSR); - outb(0, dev->iobase + DT2811_ADGCR); - - udelay(100); - - irq = probe_irq_off(irqs); - restore_flags(flags); - - /*outb(DT2811_CLRERROR|DT2811_INTENB, - dev->iobase+DT2811_ADCSR);*/ - - if (inb(dev->iobase + DT2811_ADCSR) & DT2811_ADERROR) - printk(KERN_ERR "error probing irq (bad)\n"); - dev->irq = 0; - if (irq > 0) { - i = inb(dev->iobase + DT2811_ADDATLO); - i = inb(dev->iobase + DT2811_ADDATHI); - printk(KERN_INFO "(irq = %d)\n", irq); - ret = request_irq(irq, dt2811_interrupt, 0, - dev->board_name, dev); - if (ret < 0) - return -EIO; - dev->irq = irq; - } else if (irq == 0) { - printk(KERN_INFO "(no irq)\n"); - } else { - printk(KERN_ERR "( multiple irq's -- this is bad! )\n"); - } - } -#endif - ret = comedi_alloc_subdevices(dev, 4); if (ret) return ret; diff --git a/drivers/staging/comedi/drivers/dt2814.c b/drivers/staging/comedi/drivers/dt2814.c index 6514b9e00552..abad6e49c1c1 100644 --- a/drivers/staging/comedi/drivers/dt2814.c +++ b/drivers/staging/comedi/drivers/dt2814.c @@ -80,15 +80,12 @@ static int dt2814_ai_insn_read(struct comedi_device *dev, outb(chan, dev->iobase + DT2814_CSR); for (i = 0; i < DT2814_TIMEOUT; i++) { status = inb(dev->iobase + DT2814_CSR); - printk(KERN_INFO "dt2814: status: %02x\n", status); udelay(10); if (status & DT2814_FINISH) break; } - if (i >= DT2814_TIMEOUT) { - printk(KERN_INFO "dt2814: status: %02x\n", status); + if (i >= DT2814_TIMEOUT) return -ETIMEDOUT; - } hi = inb(dev->iobase + DT2814_DATA); lo = inb(dev->iobase + DT2814_DATA); @@ -200,7 +197,7 @@ static irqreturn_t dt2814_interrupt(int irq, void *d) int lo, hi; struct comedi_device *dev = d; struct dt2814_private *devpriv = dev->private; - struct comedi_subdevice *s; + struct comedi_subdevice *s = dev->read_subdev; int data; if (!dev->attached) { @@ -208,8 +205,6 @@ static irqreturn_t dt2814_interrupt(int irq, void *d) return IRQ_HANDLED; } - s = &dev->subdevices[0]; - hi = inb(dev->iobase + DT2814_DATA); lo = inb(dev->iobase + DT2814_DATA); @@ -238,9 +233,9 @@ static irqreturn_t dt2814_interrupt(int irq, void *d) static int dt2814_attach(struct comedi_device *dev, struct comedi_devconfig *it) { struct dt2814_private *devpriv; - int i, irq; - int ret; struct comedi_subdevice *s; + int ret; + int i; ret = comedi_request_region(dev, it->options[0], DT2814_SIZE); if (ret) @@ -249,49 +244,17 @@ static int dt2814_attach(struct comedi_device *dev, struct comedi_devconfig *it) outb(0, dev->iobase + DT2814_CSR); udelay(100); if (inb(dev->iobase + DT2814_CSR) & DT2814_ERR) { - printk(KERN_ERR "reset error (fatal)\n"); + dev_err(dev->class_dev, "reset error (fatal)\n"); return -EIO; } i = inb(dev->iobase + DT2814_DATA); i = inb(dev->iobase + DT2814_DATA); - irq = it->options[1]; -#if 0 - if (irq < 0) { - save_flags(flags); - sti(); - irqs = probe_irq_on(); - - outb(0, dev->iobase + DT2814_CSR); - - udelay(100); - - irq = probe_irq_off(irqs); - restore_flags(flags); - if (inb(dev->iobase + DT2814_CSR) & DT2814_ERR) - printk(KERN_DEBUG "error probing irq (bad)\n"); - - - i = inb(dev->iobase + DT2814_DATA); - i = inb(dev->iobase + DT2814_DATA); - } -#endif - dev->irq = 0; - if (irq > 0) { - if (request_irq(irq, dt2814_interrupt, 0, "dt2814", dev)) { - printk(KERN_WARNING "(irq %d unavailable)\n", irq); - } else { - printk(KERN_INFO "( irq = %d )\n", irq); - dev->irq = irq; - } - } else if (irq == 0) { - printk(KERN_WARNING "(no irq)\n"); - } else { -#if 0 - printk(KERN_DEBUG "(probe returned multiple irqs--bad)\n"); -#else - printk(KERN_WARNING "(irq probe not implemented)\n"); -#endif + if (it->options[1]) { + ret = request_irq(it->options[1], dt2814_interrupt, 0, + dev->board_name, dev); + if (ret == 0) + dev->irq = it->options[1]; } ret = comedi_alloc_subdevices(dev, 1); @@ -303,16 +266,19 @@ static int dt2814_attach(struct comedi_device *dev, struct comedi_devconfig *it) return -ENOMEM; s = &dev->subdevices[0]; - dev->read_subdev = s; s->type = COMEDI_SUBD_AI; - s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_CMD_READ; + s->subdev_flags = SDF_READABLE | SDF_GROUND; s->n_chan = 16; /* XXX */ - s->len_chanlist = 1; s->insn_read = dt2814_ai_insn_read; - s->do_cmd = dt2814_ai_cmd; - s->do_cmdtest = dt2814_ai_cmdtest; s->maxdata = 0xfff; s->range_table = &range_unknown; /* XXX */ + if (dev->irq) { + dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; + s->len_chanlist = 1; + s->do_cmd = dt2814_ai_cmd; + s->do_cmdtest = dt2814_ai_cmdtest; + } return 0; } diff --git a/drivers/staging/comedi/drivers/dt2815.c b/drivers/staging/comedi/drivers/dt2815.c index 34040f0175e8..ee24717821e1 100644 --- a/drivers/staging/comedi/drivers/dt2815.c +++ b/drivers/staging/comedi/drivers/dt2815.c @@ -107,8 +107,9 @@ static int dt2815_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s, status = dt2815_wait_for_status(dev, 0x00); if (status != 0) { - printk(KERN_WARNING "dt2815: failed to write low byte " - "on %d reason %x\n", chan, status); + dev_dbg(dev->class_dev, + "failed to write low byte on %d reason %x\n", + chan, status); return -EBUSY; } @@ -116,8 +117,9 @@ static int dt2815_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s, status = dt2815_wait_for_status(dev, 0x10); if (status != 0x10) { - printk(KERN_WARNING "dt2815: failed to write high byte " - "on %d reason %x\n", chan, status); + dev_dbg(dev->class_dev, + "failed to write high byte on %d reason %x\n", + chan, status); return -EBUSY; } devpriv->ao_readback[chan] = data[i]; @@ -200,12 +202,13 @@ static int dt2815_attach(struct comedi_device *dev, struct comedi_devconfig *it) unsigned int program; program = (it->options[4] & 0x3) << 3 | 0x7; outb(program, dev->iobase + DT2815_DATA); - printk(KERN_INFO ", program: 0x%x (@t=%d)\n", - program, i); + dev_dbg(dev->class_dev, "program: 0x%x (@t=%d)\n", + program, i); break; } else if (status != 0x00) { - printk(KERN_WARNING "dt2815: unexpected status 0x%x " - "(@t=%d)\n", status, i); + dev_dbg(dev->class_dev, + "unexpected status 0x%x (@t=%d)\n", + status, i); if (status & 0x60) outb(0x00, dev->iobase + DT2815_STATUS); } diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c index a01e6b553887..895f73a19023 100644 --- a/drivers/staging/comedi/drivers/dt282x.c +++ b/drivers/staging/comedi/drivers/dt282x.c @@ -63,8 +63,6 @@ Notes: #include "comedi_fc.h" -#define DEBUG - #define DT2821_TIMEOUT 100 /* 500 us */ #define DT2821_SIZE 0x10 @@ -156,55 +154,55 @@ Notes: static const struct comedi_lrange range_dt282x_ai_lo_bipolar = { 4, { - RANGE(-10, 10), - RANGE(-5, 5), - RANGE(-2.5, 2.5), - RANGE(-1.25, 1.25) + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25) } }; static const struct comedi_lrange range_dt282x_ai_lo_unipolar = { 4, { - RANGE(0, 10), - RANGE(0, 5), - RANGE(0, 2.5), - RANGE(0, 1.25) + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) } }; static const struct comedi_lrange range_dt282x_ai_5_bipolar = { 4, { - RANGE(-5, 5), - RANGE(-2.5, 2.5), - RANGE(-1.25, 1.25), - RANGE(-0.625, 0.625) + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625) } }; static const struct comedi_lrange range_dt282x_ai_5_unipolar = { 4, { - RANGE(0, 5), - RANGE(0, 2.5), - RANGE(0, 1.25), - RANGE(0, 0.625), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25), + UNI_RANGE(0.625) } }; static const struct comedi_lrange range_dt282x_ai_hi_bipolar = { 4, { - RANGE(-10, 10), - RANGE(-1, 1), - RANGE(-0.1, 0.1), - RANGE(-0.02, 0.02) + BIP_RANGE(10), + BIP_RANGE(1), + BIP_RANGE(0.1), + BIP_RANGE(0.02) } }; static const struct comedi_lrange range_dt282x_ai_hi_unipolar = { 4, { - RANGE(0, 10), - RANGE(0, 1), - RANGE(0, 0.1), - RANGE(0, 0.02) + UNI_RANGE(10), + UNI_RANGE(1), + UNI_RANGE(0.1), + UNI_RANGE(0.02) } }; @@ -308,15 +306,15 @@ static void dt282x_munge(struct comedi_device *dev, unsigned short *buf, static void dt282x_ao_dma_interrupt(struct comedi_device *dev) { struct dt282x_private *devpriv = dev->private; + struct comedi_subdevice *s = dev->write_subdev; void *ptr; int size; int i; - struct comedi_subdevice *s = &dev->subdevices[1]; outw(devpriv->supcsr | DT2821_CLRDMADNE, dev->iobase + DT2821_SUPCSR); if (!s->async->prealloc_buf) { - printk(KERN_ERR "async->data disappeared. dang!\n"); + dev_err(dev->class_dev, "no buffer in %s\n", __func__); return; } @@ -329,7 +327,7 @@ static void dt282x_ao_dma_interrupt(struct comedi_device *dev) size = cfc_read_array_from_buffer(s, ptr, devpriv->dma_maxsize); if (size == 0) { - printk(KERN_ERR "dt282x: AO underrun\n"); + dev_err(dev->class_dev, "AO underrun\n"); dt282x_ao_cancel(dev, s); s->async->events |= COMEDI_CB_OVERFLOW; return; @@ -341,16 +339,16 @@ static void dt282x_ao_dma_interrupt(struct comedi_device *dev) static void dt282x_ai_dma_interrupt(struct comedi_device *dev) { struct dt282x_private *devpriv = dev->private; + struct comedi_subdevice *s = dev->read_subdev; void *ptr; int size; int i; int ret; - struct comedi_subdevice *s = &dev->subdevices[0]; outw(devpriv->supcsr | DT2821_CLRDMADNE, dev->iobase + DT2821_SUPCSR); if (!s->async->prealloc_buf) { - printk(KERN_ERR "async->data disappeared. dang!\n"); + dev_err(dev->class_dev, "no buffer in %s\n", __func__); return; } @@ -371,7 +369,7 @@ static void dt282x_ai_dma_interrupt(struct comedi_device *dev) devpriv->nread -= size / 2; if (devpriv->nread < 0) { - printk(KERN_INFO "dt282x: off by one\n"); + dev_info(dev->class_dev, "nread off by one\n"); devpriv->nread = 0; } if (!devpriv->nread) { @@ -450,8 +448,8 @@ static irqreturn_t dt282x_interrupt(int irq, void *d) { struct comedi_device *dev = d; struct dt282x_private *devpriv = dev->private; - struct comedi_subdevice *s; - struct comedi_subdevice *s_ao; + struct comedi_subdevice *s = dev->read_subdev; + struct comedi_subdevice *s_ao = dev->write_subdev; unsigned int supcsr, adcsr, dacsr; int handled = 0; @@ -460,8 +458,6 @@ static irqreturn_t dt282x_interrupt(int irq, void *d) return IRQ_HANDLED; } - s = &dev->subdevices[0]; - s_ao = &dev->subdevices[1]; adcsr = inw(dev->iobase + DT2821_ADCSR); dacsr = inw(dev->iobase + DT2821_DACSR); supcsr = inw(dev->iobase + DT2821_SUPCSR); @@ -481,13 +477,6 @@ static irqreturn_t dt282x_interrupt(int irq, void *d) handled = 1; } if (dacsr & DT2821_DAERR) { -#if 0 - static int warn = 5; - if (--warn <= 0) { - disable_irq(dev->irq); - printk(KERN_INFO "disabling irq\n"); - } -#endif comedi_error(dev, "D/A error"); dt282x_ao_cancel(dev, s_ao); s->async->events |= COMEDI_CB_ERROR; @@ -520,8 +509,7 @@ static irqreturn_t dt282x_interrupt(int irq, void *d) } #endif comedi_event(dev, s); - /* printk("adcsr=0x%02x dacsr-0x%02x supcsr=0x%02x\n", - adcsr, dacsr, supcsr); */ + return IRQ_RETVAL(handled); } @@ -894,7 +882,7 @@ static int dt282x_ao_inttrig(struct comedi_device *dev, size = cfc_read_array_from_buffer(s, devpriv->dma[0].buf, devpriv->dma_maxsize); if (size == 0) { - printk(KERN_ERR "dt282x: AO underrun\n"); + dev_err(dev->class_dev, "AO underrun\n"); return -EPIPE; } prep_ao_dma(dev, 0, size); @@ -902,7 +890,7 @@ static int dt282x_ao_inttrig(struct comedi_device *dev, size = cfc_read_array_from_buffer(s, devpriv->dma[1].buf, devpriv->dma_maxsize); if (size == 0) { - printk(KERN_ERR "dt282x: AO underrun\n"); + dev_err(dev->class_dev, "AO underrun\n"); return -EPIPE; } prep_ao_dma(dev, 1, size); @@ -1062,10 +1050,8 @@ static int dt282x_grab_dma(struct comedi_device *dev, int dma1, int dma2) devpriv->usedma = 0; - if (!dma1 && !dma2) { - printk(KERN_ERR " (no dma)"); + if (!dma1 && !dma2) return 0; - } if (dma1 == dma2 || dma1 < 5 || dma2 < 5 || dma1 > 7 || dma2 > 7) return -EINVAL; @@ -1090,12 +1076,8 @@ static int dt282x_grab_dma(struct comedi_device *dev, int dma1, int dma2) devpriv->dma_maxsize = PAGE_SIZE; devpriv->dma[0].buf = (void *)__get_free_page(GFP_KERNEL | GFP_DMA); devpriv->dma[1].buf = (void *)__get_free_page(GFP_KERNEL | GFP_DMA); - if (!devpriv->dma[0].buf || !devpriv->dma[1].buf) { - printk(KERN_ERR " can't get DMA memory"); + if (!devpriv->dma[0].buf || !devpriv->dma[1].buf) return -ENOMEM; - } - - printk(KERN_INFO " (dma=%d,%d)", dma1, dma2); devpriv->usedma = 1; @@ -1120,9 +1102,9 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it) { const struct dt282x_board *board = comedi_board(dev); struct dt282x_private *devpriv; - int i, irq; - int ret; struct comedi_subdevice *s; + int ret; + int i; ret = comedi_request_region(dev, it->options[0], DT2821_SIZE); if (ret) @@ -1130,14 +1112,6 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it) outw(DT2821_BDINIT, dev->iobase + DT2821_SUPCSR); i = inw(dev->iobase + DT2821_ADCSR); -#ifdef DEBUG - printk(KERN_DEBUG " fingerprint=%x,%x,%x,%x,%x", - inw(dev->iobase + DT2821_ADCSR), - inw(dev->iobase + DT2821_CHANCSR), - inw(dev->iobase + DT2821_DACSR), - inw(dev->iobase + DT2821_SUPCSR), - inw(dev->iobase + DT2821_TMRCTR)); -#endif if (((inw(dev->iobase + DT2821_ADCSR) & DT2821_ADCSR_MASK) != DT2821_ADCSR_VAL) || @@ -1149,58 +1123,28 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it) != DT2821_SUPCSR_VAL) || ((inw(dev->iobase + DT2821_TMRCTR) & DT2821_TMRCTR_MASK) != DT2821_TMRCTR_VAL)) { - printk(KERN_ERR " board not found"); + dev_err(dev->class_dev, "board not found\n"); return -EIO; } /* should do board test */ - irq = it->options[opt_irq]; -#if 0 - if (irq < 0) { - unsigned long flags; - int irqs; - - save_flags(flags); - sti(); - irqs = probe_irq_on(); - - /* trigger interrupt */ - - udelay(100); - - irq = probe_irq_off(irqs); - restore_flags(flags); - if (0 /* error */) - printk(KERN_ERR " error probing irq (bad)"); - } -#endif - if (irq > 0) { - printk(KERN_INFO " ( irq = %d )", irq); - ret = request_irq(irq, dt282x_interrupt, 0, + if (it->options[opt_irq] > 0) { + ret = request_irq(it->options[opt_irq], dt282x_interrupt, 0, dev->board_name, dev); - if (ret < 0) { - printk(KERN_ERR " failed to get irq\n"); - return -EIO; - } - dev->irq = irq; - } else if (irq == 0) { - printk(KERN_INFO " (no irq)"); - } else { -#if 0 - printk(KERN_INFO " (probe returned multiple irqs--bad)"); -#else - printk(KERN_INFO " (irq probe not implemented)"); -#endif + if (ret == 0) + dev->irq = it->options[opt_irq]; } devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv)); if (!devpriv) return -ENOMEM; - ret = dt282x_grab_dma(dev, it->options[opt_dma1], - it->options[opt_dma2]); - if (ret < 0) - return ret; + if (dev->irq) { + ret = dt282x_grab_dma(dev, it->options[opt_dma1], + it->options[opt_dma2]); + if (ret < 0) + return ret; + } ret = comedi_alloc_subdevices(dev, 3); if (ret) @@ -1208,22 +1152,25 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it) s = &dev->subdevices[0]; - dev->read_subdev = s; /* ai subdevice */ s->type = COMEDI_SUBD_AI; - s->subdev_flags = SDF_READABLE | SDF_CMD_READ | + s->subdev_flags = SDF_READABLE | ((it->options[opt_diff]) ? SDF_DIFF : SDF_COMMON); s->n_chan = (it->options[opt_diff]) ? board->adchan_di : board->adchan_se; s->insn_read = dt282x_ai_insn_read; - s->do_cmdtest = dt282x_ai_cmdtest; - s->do_cmd = dt282x_ai_cmd; - s->cancel = dt282x_ai_cancel; s->maxdata = (1 << board->adbits) - 1; - s->len_chanlist = 16; s->range_table = opt_ai_range_lkup(board->ispgl, it->options[opt_ai_range]); devpriv->ad_2scomp = it->options[opt_ai_twos]; + if (dev->irq) { + dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; + s->len_chanlist = 16; + s->do_cmdtest = dt282x_ai_cmdtest; + s->do_cmd = dt282x_ai_cmd; + s->cancel = dt282x_ai_cancel; + } s = &dev->subdevices[1]; @@ -1231,15 +1178,10 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it) if (s->n_chan) { /* ao subsystem */ s->type = COMEDI_SUBD_AO; - dev->write_subdev = s; - s->subdev_flags = SDF_WRITABLE | SDF_CMD_WRITE; + s->subdev_flags = SDF_WRITABLE; s->insn_read = dt282x_ao_insn_read; s->insn_write = dt282x_ao_insn_write; - s->do_cmdtest = dt282x_ao_cmdtest; - s->do_cmd = dt282x_ao_cmd; - s->cancel = dt282x_ao_cancel; s->maxdata = (1 << board->dabits) - 1; - s->len_chanlist = 2; s->range_table_list = devpriv->darangelist; devpriv->darangelist[0] = opt_ao_range_lkup(it->options[opt_ao0_range]); @@ -1247,6 +1189,14 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it) opt_ao_range_lkup(it->options[opt_ao1_range]); devpriv->da0_2scomp = it->options[opt_ao0_twos]; devpriv->da1_2scomp = it->options[opt_ao1_twos]; + if (dev->irq) { + dev->write_subdev = s; + s->subdev_flags |= SDF_CMD_WRITE; + s->len_chanlist = 2; + s->do_cmdtest = dt282x_ao_cmdtest; + s->do_cmd = dt282x_ao_cmd; + s->cancel = dt282x_ao_cancel; + } } else { s->type = COMEDI_SUBD_UNUSED; } @@ -1261,8 +1211,6 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it) s->maxdata = 1; s->range_table = &range_digital; - printk(KERN_INFO "\n"); - return 0; } diff --git a/drivers/staging/comedi/drivers/dt3000.c b/drivers/staging/comedi/drivers/dt3000.c index 292226eeff92..f52a4476cb73 100644 --- a/drivers/staging/comedi/drivers/dt3000.c +++ b/drivers/staging/comedi/drivers/dt3000.c @@ -48,8 +48,6 @@ AO commands are not supported. you the docs without one, also. */ -#define DEBUG 1 - #include <linux/module.h> #include <linux/pci.h> #include <linux/delay.h> @@ -253,24 +251,6 @@ struct dt3k_private { unsigned int ai_rear; }; -#ifdef DEBUG -static char *intr_flags[] = { - "AdFull", "AdSwError", "AdHwError", "DaEmpty", - "DaSwError", "DaHwError", "CtDone", "CmDone", -}; - -static void debug_intr_flags(unsigned int flags) -{ - int i; - printk(KERN_DEBUG "dt3k: intr_flags:"); - for (i = 0; i < 8; i++) { - if (flags & (1 << i)) - printk(KERN_CONT " %s", intr_flags[i]); - } - printk(KERN_CONT "\n"); -} -#endif - #define TIMEOUT 100 static void dt3k_send_cmd(struct comedi_device *dev, unsigned int cmd) @@ -372,17 +352,13 @@ static irqreturn_t dt3k_interrupt(int irq, void *d) { struct comedi_device *dev = d; struct dt3k_private *devpriv = dev->private; - struct comedi_subdevice *s; + struct comedi_subdevice *s = dev->read_subdev; unsigned int status; if (!dev->attached) return IRQ_NONE; - s = &dev->subdevices[0]; status = readw(devpriv->io_addr + DPR_Intr_Flag); -#ifdef DEBUG - debug_intr_flags(status); -#endif if (status & DT3000_ADFULL) { dt3k_ai_empty_fifo(dev, s); @@ -725,29 +701,33 @@ static int dt3000_auto_attach(struct comedi_device *dev, if (!devpriv->io_addr) return -ENOMEM; - ret = request_irq(pcidev->irq, dt3k_interrupt, IRQF_SHARED, - dev->board_name, dev); - if (ret) - return ret; - dev->irq = pcidev->irq; + if (pcidev->irq) { + ret = request_irq(pcidev->irq, dt3k_interrupt, IRQF_SHARED, + dev->board_name, dev); + if (ret == 0) + dev->irq = pcidev->irq; + } ret = comedi_alloc_subdevices(dev, 4); if (ret) return ret; s = &dev->subdevices[0]; - dev->read_subdev = s; /* ai subdevice */ s->type = COMEDI_SUBD_AI; - s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF | SDF_CMD_READ; + s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF; s->n_chan = this_board->adchan; s->insn_read = dt3k_ai_insn; s->maxdata = (1 << this_board->adbits) - 1; - s->len_chanlist = 512; s->range_table = &range_dt3000_ai; /* XXX */ - s->do_cmd = dt3k_ai_cmd; - s->do_cmdtest = dt3k_ai_cmdtest; - s->cancel = dt3k_ai_cancel; + if (dev->irq) { + dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; + s->len_chanlist = 512; + s->do_cmd = dt3k_ai_cmd; + s->do_cmdtest = dt3k_ai_cmdtest; + s->cancel = dt3k_ai_cancel; + } s = &dev->subdevices[1]; /* ao subsystem */ @@ -818,7 +798,7 @@ static int dt3000_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &dt3000_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(dt3000_pci_table) = { +static const struct pci_device_id dt3000_pci_table[] = { { PCI_VDEVICE(DT, 0x0022), BOARD_DT3001 }, { PCI_VDEVICE(DT, 0x0023), BOARD_DT3002 }, { PCI_VDEVICE(DT, 0x0024), BOARD_DT3003 }, diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c index 73af600c1725..b3aeb6fb2ad0 100644 --- a/drivers/staging/comedi/drivers/dt9812.c +++ b/drivers/staging/comedi/drivers/dt9812.c @@ -41,7 +41,6 @@ for my needs. #include <linux/kernel.h> #include <linux/module.h> #include <linux/errno.h> -#include <linux/init.h> #include <linux/uaccess.h> #include <linux/usb.h> diff --git a/drivers/staging/comedi/drivers/dyna_pci10xx.c b/drivers/staging/comedi/drivers/dyna_pci10xx.c index f2a9f1c2f3b6..f224825830ba 100644 --- a/drivers/staging/comedi/drivers/dyna_pci10xx.c +++ b/drivers/staging/comedi/drivers/dyna_pci10xx.c @@ -42,11 +42,12 @@ #define READ_TIMEOUT 50 -static const struct comedi_lrange range_pci1050_ai = { 3, { - BIP_RANGE(10), - BIP_RANGE(5), - UNI_RANGE(10) - } +static const struct comedi_lrange range_pci1050_ai = { + 3, { + BIP_RANGE(10), + BIP_RANGE(5), + UNI_RANGE(10) + } }; static const char range_codes_pci1050_ai[] = { 0x00, 0x10, 0x30 }; @@ -90,8 +91,7 @@ static int dyna_pci10xx_insn_read_ai(struct comedi_device *dev, goto conv_finish; } data[n] = 0; - printk(KERN_DEBUG "comedi: dyna_pci10xx: " - "timeout reading analog input\n"); + dev_dbg(dev->class_dev, "timeout reading analog input\n"); continue; conv_finish: /* mask the first 4 bits - EOC bits */ @@ -260,7 +260,7 @@ static int dyna_pci10xx_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(dyna_pci10xx_pci_table) = { +static const struct pci_device_id dyna_pci10xx_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_PLX, 0x1050) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/fl512.c b/drivers/staging/comedi/drivers/fl512.c index e3ff4c438979..a99ddf00ddc4 100644 --- a/drivers/staging/comedi/drivers/fl512.c +++ b/drivers/staging/comedi/drivers/fl512.c @@ -16,8 +16,6 @@ Configuration options: [0] - I/O port base address */ -#define DEBUG 0 - #include <linux/module.h> #include "../comedidev.h" @@ -28,15 +26,16 @@ struct fl512_private { unsigned short ao_readback[2]; }; -static const struct comedi_lrange range_fl512 = { 4, { - BIP_RANGE(0.5), - BIP_RANGE(1), - BIP_RANGE(5), - BIP_RANGE(10), - UNI_RANGE(1), - UNI_RANGE(5), - UNI_RANGE(10), - } +static const struct comedi_lrange range_fl512 = { + 4, { + BIP_RANGE(0.5), + BIP_RANGE(1), + BIP_RANGE(5), + BIP_RANGE(10), + UNI_RANGE(1), + UNI_RANGE(5), + UNI_RANGE(10) + } }; /* diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c index 559bf5583530..de60a2871d70 100644 --- a/drivers/staging/comedi/drivers/gsc_hpdi.c +++ b/drivers/staging/comedi/drivers/gsc_hpdi.c @@ -60,15 +60,6 @@ static int hpdi_cancel(struct comedi_device *dev, struct comedi_subdevice *s); static irqreturn_t handle_interrupt(int irq, void *d); static int dio_config_block_size(struct comedi_device *dev, unsigned int *data); -#undef HPDI_DEBUG /* disable debugging messages */ -/* #define HPDI_DEBUG enable debugging code */ - -#ifdef HPDI_DEBUG -#define DEBUG_PRINT(format, args...) pr_debug(format , ## args) -#else -#define DEBUG_PRINT(format, args...) no_printk(pr_fmt(format), ## args) -#endif - #define TIMER_BASE 50 /* 20MHz master clock */ #define DMA_BUFFER_SIZE 0x10000 #define NUM_DMA_BUFFERS 4 @@ -260,32 +251,6 @@ static void init_plx9080(struct comedi_device *dev) uint32_t bits; void __iomem *plx_iobase = devpriv->plx9080_iobase; - /* plx9080 dump */ - DEBUG_PRINT(" plx interrupt status 0x%x\n", - readl(plx_iobase + PLX_INTRCS_REG)); - DEBUG_PRINT(" plx id bits 0x%x\n", readl(plx_iobase + PLX_ID_REG)); - DEBUG_PRINT(" plx control reg 0x%x\n", - readl(devpriv->plx9080_iobase + PLX_CONTROL_REG)); - - DEBUG_PRINT(" plx revision 0x%x\n", - readl(plx_iobase + PLX_REVISION_REG)); - DEBUG_PRINT(" plx dma channel 0 mode 0x%x\n", - readl(plx_iobase + PLX_DMA0_MODE_REG)); - DEBUG_PRINT(" plx dma channel 1 mode 0x%x\n", - readl(plx_iobase + PLX_DMA1_MODE_REG)); - DEBUG_PRINT(" plx dma channel 0 pci address 0x%x\n", - readl(plx_iobase + PLX_DMA0_PCI_ADDRESS_REG)); - DEBUG_PRINT(" plx dma channel 0 local address 0x%x\n", - readl(plx_iobase + PLX_DMA0_LOCAL_ADDRESS_REG)); - DEBUG_PRINT(" plx dma channel 0 transfer size 0x%x\n", - readl(plx_iobase + PLX_DMA0_TRANSFER_SIZE_REG)); - DEBUG_PRINT(" plx dma channel 0 descriptor 0x%x\n", - readl(plx_iobase + PLX_DMA0_DESCRIPTOR_REG)); - DEBUG_PRINT(" plx dma channel 0 command status 0x%x\n", - readb(plx_iobase + PLX_DMA0_CS_REG)); - DEBUG_PRINT(" plx dma channel 0 threshold 0x%x\n", - readl(plx_iobase + PLX_DMA0_THRESHOLD_REG)); - DEBUG_PRINT(" plx bigend 0x%x\n", readl(plx_iobase + PLX_BIGEND_REG)); #ifdef __BIG_ENDIAN bits = BIGEND_DMA0 | BIGEND_DMA1; #else @@ -395,10 +360,6 @@ static int setup_dma_descriptors(struct comedi_device *dev, if (transfer_size == 0) return -1; - DEBUG_PRINT(" transfer_size %i\n", transfer_size); - DEBUG_PRINT(" descriptors at 0x%lx\n", - (unsigned long)devpriv->dma_desc_phys_addr); - buffer_offset = 0; buffer_index = 0; for (i = 0; i < NUM_DMA_DESCRIPTORS && @@ -423,21 +384,11 @@ static int setup_dma_descriptors(struct comedi_device *dev, buffer_offset = 0; buffer_index++; } - - DEBUG_PRINT(" desc %i\n", i); - DEBUG_PRINT(" start addr virt 0x%p, phys 0x%lx\n", - devpriv->desc_dio_buffer[i], - (unsigned long)devpriv->dma_desc[i]. - pci_start_addr); - DEBUG_PRINT(" next 0x%lx\n", - (unsigned long)devpriv->dma_desc[i].next); } devpriv->num_dma_descriptors = i; /* fix last descriptor to point back to first */ devpriv->dma_desc[i - 1].next = cpu_to_le32(devpriv->dma_desc_phys_addr | next_bits); - DEBUG_PRINT(" desc %i next fixup 0x%lx\n", i - 1, - (unsigned long)devpriv->dma_desc[i - 1].next); devpriv->block_size = transfer_size; @@ -489,9 +440,6 @@ static int hpdi_auto_attach(struct comedi_device *dev, return -ENOMEM; } - DEBUG_PRINT(" plx9080 remapped to 0x%p\n", devpriv->plx9080_iobase); - DEBUG_PRINT(" hpdi remapped to 0x%p\n", devpriv->hpdi_iobase); - init_plx9080(dev); /* get irq */ @@ -510,9 +458,6 @@ static int hpdi_auto_attach(struct comedi_device *dev, devpriv->dio_buffer[i] = pci_alloc_consistent(pcidev, DMA_BUFFER_SIZE, &devpriv->dio_buffer_phys_addr[i]); - DEBUG_PRINT("dio_buffer at virt 0x%p, phys 0x%lx\n", - devpriv->dio_buffer[i], - (unsigned long)devpriv->dio_buffer_phys_addr[i]); } /* allocate dma descriptors */ devpriv->dma_desc = pci_alloc_consistent(pcidev, @@ -687,8 +632,6 @@ static int di_cmd(struct comedi_device *dev, struct comedi_subdevice *s) hpdi_writel(dev, RX_FIFO_RESET_BIT, BOARD_CONTROL_REG); - DEBUG_PRINT("hpdi: in di_cmd\n"); - abort_dma(dev, 0); devpriv->dma_desc_index = 0; @@ -725,7 +668,6 @@ static int di_cmd(struct comedi_device *dev, struct comedi_subdevice *s) writel(intr_bit(RX_FULL_INTR), devpriv->hpdi_iobase + INTERRUPT_CONTROL_REG); - DEBUG_PRINT("hpdi: starting rx\n"); hpdi_writel(dev, RX_ENABLE_BIT, BOARD_CONTROL_REG); return 0; @@ -778,11 +720,6 @@ static void drain_dma_buffers(struct comedi_device *dev, unsigned int channel) num_samples * sizeof(uint32_t)); devpriv->dma_desc_index++; devpriv->dma_desc_index %= devpriv->num_dma_descriptors; - - DEBUG_PRINT("next desc addr 0x%lx\n", (unsigned long) - devpriv->dma_desc[devpriv->dma_desc_index]. - next); - DEBUG_PRINT("pci addr reg 0x%x\n", next_transfer_addr); } /* XXX check for buffer overrun somehow */ } @@ -812,7 +749,6 @@ static irqreturn_t handle_interrupt(int irq, void *d) async->events = 0; if (hpdi_intr_status) { - DEBUG_PRINT("hpdi: intr status 0x%x, ", hpdi_intr_status); writel(hpdi_intr_status, devpriv->hpdi_iobase + INTERRUPT_STATUS_REG); } @@ -823,10 +759,8 @@ static irqreturn_t handle_interrupt(int irq, void *d) writeb((dma0_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT, devpriv->plx9080_iobase + PLX_DMA0_CS_REG); - DEBUG_PRINT("dma0 status 0x%x\n", dma0_status); if (dma0_status & PLX_DMA_EN_BIT) drain_dma_buffers(dev, 0); - DEBUG_PRINT(" cleared dma ch0 interrupt\n"); } spin_unlock_irqrestore(&dev->spinlock, flags); @@ -836,9 +770,6 @@ static irqreturn_t handle_interrupt(int irq, void *d) if (plx_status & ICS_DMA1_A) { /* XXX *//* dma chan 1 interrupt */ writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT, devpriv->plx9080_iobase + PLX_DMA1_CS_REG); - DEBUG_PRINT("dma1 status 0x%x\n", dma1_status); - - DEBUG_PRINT(" cleared dma ch1 interrupt\n"); } spin_unlock_irqrestore(&dev->spinlock, flags); @@ -846,15 +777,11 @@ static irqreturn_t handle_interrupt(int irq, void *d) if (plx_status & ICS_LDIA) { /* clear local doorbell interrupt */ plx_bits = readl(devpriv->plx9080_iobase + PLX_DBR_OUT_REG); writel(plx_bits, devpriv->plx9080_iobase + PLX_DBR_OUT_REG); - DEBUG_PRINT(" cleared local doorbell bits 0x%x\n", plx_bits); } if (hpdi_board_status & RX_OVERRUN_BIT) { comedi_error(dev, "rx fifo overrun"); async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; - DEBUG_PRINT("dma0_status 0x%x\n", - (int)readb(devpriv->plx9080_iobase + - PLX_DMA0_CS_REG)); } if (hpdi_board_status & RX_UNDERRUN_BIT) { @@ -865,11 +792,6 @@ static irqreturn_t handle_interrupt(int irq, void *d) if (devpriv->dio_count == 0) async->events |= COMEDI_CB_EOA; - DEBUG_PRINT("board status 0x%x, ", hpdi_board_status); - DEBUG_PRINT("plx status 0x%x\n", plx_status); - if (async->events) - DEBUG_PRINT(" events 0x%x\n", async->events); - cfc_handle_events(dev, s); return IRQ_HANDLED; @@ -914,7 +836,7 @@ static int gsc_hpdi_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &gsc_hpdi_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(gsc_hpdi_pci_table) = { +static const struct pci_device_id gsc_hpdi_pci_table[] = { { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9080, PCI_VENDOR_ID_PLX, 0x2400, 0, 0, 0}, { 0 } diff --git a/drivers/staging/comedi/drivers/icp_multi.c b/drivers/staging/comedi/drivers/icp_multi.c index 1e16641ec52d..80539b2bea1a 100644 --- a/drivers/staging/comedi/drivers/icp_multi.c +++ b/drivers/staging/comedi/drivers/icp_multi.c @@ -91,12 +91,13 @@ Configuration options: not applicable, uses PCI auto config #define Status_IRQ 0x00ff /* All interrupts */ /* Define analogue range */ -static const struct comedi_lrange range_analog = { 4, { - UNI_RANGE(5), - UNI_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(10) - } +static const struct comedi_lrange range_analog = { + 4, { + UNI_RANGE(5), + UNI_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(10) + } }; static const char range_codes_analog[] = { 0x00, 0x20, 0x10, 0x30 }; @@ -597,7 +598,7 @@ static int icp_multi_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &icp_multi_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(icp_multi_pci_table) = { +static const struct pci_device_id icp_multi_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_ICP, PCI_DEVICE_ID_ICP_MULTI) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c index b52d58e5de27..6100c12c164f 100644 --- a/drivers/staging/comedi/drivers/jr3_pci.c +++ b/drivers/staging/comedi/drivers/jr3_pci.c @@ -807,7 +807,7 @@ static int jr3_pci_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &jr3_pci_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(jr3_pci_pci_table) = { +static const struct pci_device_id jr3_pci_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_1_CHANNEL) }, { PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_1_CHANNEL_NEW) }, { PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_2_CHANNEL) }, diff --git a/drivers/staging/comedi/drivers/ke_counter.c b/drivers/staging/comedi/drivers/ke_counter.c index 15589f62a619..6b9846fd8c48 100644 --- a/drivers/staging/comedi/drivers/ke_counter.c +++ b/drivers/staging/comedi/drivers/ke_counter.c @@ -139,7 +139,7 @@ static int ke_counter_pci_probe(struct pci_dev *dev, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(ke_counter_pci_table) = { +static const struct pci_device_id ke_counter_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_KOLTER, CNT_CARD_DEVICE_ID) }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c index 3d12e9135926..e739bcd66a04 100644 --- a/drivers/staging/comedi/drivers/me4000.c +++ b/drivers/staging/comedi/drivers/me4000.c @@ -328,13 +328,12 @@ static const struct me4000_board me4000_boards[] = { }; static const struct comedi_lrange me4000_ai_range = { - 4, - { - UNI_RANGE(2.5), - UNI_RANGE(10), - BIP_RANGE(2.5), - BIP_RANGE(10), - } + 4, { + UNI_RANGE(2.5), + UNI_RANGE(10), + BIP_RANGE(2.5), + BIP_RANGE(10) + } }; #define FIRMWARE_NOT_AVAILABLE 1 @@ -1105,7 +1104,7 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id) { unsigned int tmp; struct comedi_device *dev = dev_id; - struct comedi_subdevice *s = &dev->subdevices[0]; + struct comedi_subdevice *s = dev->read_subdev; int i; int c = 0; unsigned int lval; @@ -1116,12 +1115,6 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id) /* Reset all events */ s->async->events = 0; - /* Check if irq number is right */ - if (irq != dev->irq) { - dev_err(dev->class_dev, "Incorrect interrupt num: %d\n", irq); - return IRQ_HANDLED; - } - if (inl(dev->iobase + ME4000_IRQ_STATUS_REG) & ME4000_IRQ_STATUS_BIT_AI_HF) { /* Read status register to find out what happened */ @@ -1505,6 +1498,13 @@ static int me4000_auto_attach(struct comedi_device *dev, me4000_reset(dev); + if (pcidev->irq > 0) { + result = request_irq(pcidev->irq, me4000_ai_isr, IRQF_SHARED, + dev->board_name, dev); + if (result == 0) + dev->irq = pcidev->irq; + } + result = comedi_alloc_subdevices(dev, 4); if (result) return result; @@ -1525,22 +1525,12 @@ static int me4000_auto_attach(struct comedi_device *dev, s->range_table = &me4000_ai_range; s->insn_read = me4000_ai_insn_read; - if (pcidev->irq > 0) { - if (request_irq(pcidev->irq, me4000_ai_isr, - IRQF_SHARED, dev->board_name, dev)) { - dev_warn(dev->class_dev, - "request_irq failed\n"); - } else { - dev->read_subdev = s; - s->subdev_flags |= SDF_CMD_READ; - s->cancel = me4000_ai_cancel; - s->do_cmdtest = me4000_ai_do_cmd_test; - s->do_cmd = me4000_ai_do_cmd; - - dev->irq = pcidev->irq; - } - } else { - dev_warn(dev->class_dev, "No interrupt available\n"); + if (dev->irq) { + dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; + s->cancel = me4000_ai_cancel; + s->do_cmdtest = me4000_ai_do_cmd_test; + s->do_cmd = me4000_ai_do_cmd; } } else { s->type = COMEDI_SUBD_UNUSED; @@ -1635,7 +1625,7 @@ static int me4000_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &me4000_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(me4000_pci_table) = { +static const struct pci_device_id me4000_pci_table[] = { { PCI_VDEVICE(MEILHAUS, 0x4650), BOARD_ME4650 }, { PCI_VDEVICE(MEILHAUS, 0x4660), BOARD_ME4660 }, { PCI_VDEVICE(MEILHAUS, 0x4661), BOARD_ME4660I }, diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c index 24ec9ef9b1a0..7f6687896401 100644 --- a/drivers/staging/comedi/drivers/me_daq.c +++ b/drivers/staging/comedi/drivers/me_daq.c @@ -576,7 +576,7 @@ static int me_daq_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &me_daq_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(me_daq_pci_table) = { +static const struct pci_device_id me_daq_pci_table[] = { { PCI_VDEVICE(MEILHAUS, 0x2600), BOARD_ME2600 }, { PCI_VDEVICE(MEILHAUS, 0x2000), BOARD_ME2000 }, { 0 } diff --git a/drivers/staging/comedi/drivers/mf6x4.c b/drivers/staging/comedi/drivers/mf6x4.c new file mode 100644 index 000000000000..81b78e053f4e --- /dev/null +++ b/drivers/staging/comedi/drivers/mf6x4.c @@ -0,0 +1,354 @@ +/* + * comedi/drivers/mf6x4.c + * Driver for Humusoft MF634 and MF624 Data acquisition cards + * + * COMEDI - Linux Control and Measurement Device Interface + * Copyright (C) 2000 David A. Schleef <ds@schleef.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/* + * Driver: mf6x4 + * Description: Humusoft MF634 and MF624 Data acquisition card driver + * Devices: Humusoft MF634, Humusoft MF624 + * Author: Rostislav Lisovy <lisovy@gmail.com> + * Status: works + * Updated: + * Configuration Options: none + */ + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include "../comedidev.h" + +/* Registers present in BAR0 memory region */ +#define MF624_GPIOC_R 0x54 + +#define MF6X4_GPIOC_EOLC /* End Of Last Conversion */ (1 << 17) +#define MF6X4_GPIOC_LDAC /* Load DACs */ (1 << 23) +#define MF6X4_GPIOC_DACEN (1 << 26) + +/* BAR1 registers */ +#define MF6X4_DIN_R 0x10 +#define MF6X4_DIN_M 0xff +#define MF6X4_DOUT_R 0x10 +#define MF6X4_DOUT_M 0xff + +#define MF6X4_ADSTART_R 0x20 +#define MF6X4_ADDATA_R 0x00 +#define MF6X4_ADCTRL_R 0x00 +#define MF6X4_ADCTRL_M 0xff + +#define MF6X4_DA0_R 0x20 +#define MF6X4_DA1_R 0x22 +#define MF6X4_DA2_R 0x24 +#define MF6X4_DA3_R 0x26 +#define MF6X4_DA4_R 0x28 +#define MF6X4_DA5_R 0x2a +#define MF6X4_DA6_R 0x2c +#define MF6X4_DA7_R 0x2e +/* Map DAC cahnnel id to real HW-dependent offset value */ +#define MF6X4_DAC_R(x) (0x20 + ((x) * 2)) +#define MF6X4_DA_M 0x3fff + +/* BAR2 registers */ +#define MF634_GPIOC_R 0x68 + +enum mf6x4_boardid { + BOARD_MF634, + BOARD_MF624, +}; + +struct mf6x4_board { + const char *name; + unsigned int bar_nums[3]; /* We need to keep track of the + order of BARs used by the cards */ +}; + +static const struct mf6x4_board mf6x4_boards[] = { + [BOARD_MF634] = { + .name = "mf634", + .bar_nums = {0, 2, 3}, + }, + [BOARD_MF624] = { + .name = "mf624", + .bar_nums = {0, 2, 4}, + }, +}; + +struct mf6x4_private { + /* + * Documentation for both MF634 and MF624 describes registers + * present in BAR0, 1 and 2 regions. + * The real (i.e. in HW) BAR numbers are different for MF624 + * and MF634 yet we will call them 0, 1, 2 + */ + void __iomem *bar0_mem; + void __iomem *bar1_mem; + void __iomem *bar2_mem; + + /* + * This configuration register has the same function and fields + * for both cards however it lies in different BARs on different + * offsets -- this variable makes the access easier + */ + void __iomem *gpioc_R; + + /* DAC value cache -- used for insn_read function */ + int ao_readback[8]; +}; + +static int mf6x4_di_insn_bits(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) +{ + struct mf6x4_private *devpriv = dev->private; + + data[1] = ioread16(devpriv->bar1_mem + MF6X4_DIN_R) & MF6X4_DIN_M; + + return insn->n; +} + +static int mf6x4_do_insn_bits(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) +{ + struct mf6x4_private *devpriv = dev->private; + + if (comedi_dio_update_state(s, data)) + iowrite16(s->state & MF6X4_DOUT_M, + devpriv->bar1_mem + MF6X4_DOUT_R); + + data[1] = s->state; + + return insn->n; +} + +static int mf6x4_ai_wait_for_eoc(struct comedi_device *dev, + unsigned int timeout) +{ + struct mf6x4_private *devpriv = dev->private; + unsigned int eolc; + + while (timeout--) { + eolc = ioread32(devpriv->gpioc_R) & MF6X4_GPIOC_EOLC; + if (eolc) + return 0; + + udelay(1); + } + + return -ETIME; +} + +static int mf6x4_ai_insn_read(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) +{ + struct mf6x4_private *devpriv = dev->private; + int chan = CR_CHAN(insn->chanspec); + int ret; + int i; + int d; + + /* Set the ADC channel number in the scan list */ + iowrite16((1 << chan) & MF6X4_ADCTRL_M, + devpriv->bar1_mem + MF6X4_ADCTRL_R); + + for (i = 0; i < insn->n; i++) { + /* Trigger ADC conversion by reading ADSTART */ + ioread16(devpriv->bar1_mem + MF6X4_ADSTART_R); + + ret = mf6x4_ai_wait_for_eoc(dev, 100); + if (ret) + return ret; + + /* Read the actual value */ + d = ioread16(devpriv->bar1_mem + MF6X4_ADDATA_R); + d &= s->maxdata; + data[i] = d; + } + + iowrite16(0x0, devpriv->bar1_mem + MF6X4_ADCTRL_R); + + return insn->n; +} + +static int mf6x4_ao_insn_write(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) +{ + struct mf6x4_private *devpriv = dev->private; + unsigned int chan = CR_CHAN(insn->chanspec); + uint32_t gpioc; + int i; + + /* Enable instantaneous update of converters outputs + Enable DACs */ + gpioc = ioread32(devpriv->gpioc_R); + iowrite32((gpioc & ~MF6X4_GPIOC_LDAC) | MF6X4_GPIOC_DACEN, + devpriv->gpioc_R); + + for (i = 0; i < insn->n; i++) { + iowrite16(data[i] & MF6X4_DA_M, + devpriv->bar1_mem + MF6X4_DAC_R(chan)); + + devpriv->ao_readback[chan] = data[i]; + } + + return insn->n; +} + +static int mf6x4_ao_insn_read(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) +{ + struct mf6x4_private *devpriv = dev->private; + unsigned int chan = CR_CHAN(insn->chanspec); + int i; + + for (i = 0; i < insn->n; i++) + data[i] = devpriv->ao_readback[chan]; + + return insn->n; +} + +static int mf6x4_auto_attach(struct comedi_device *dev, unsigned long context) +{ + struct pci_dev *pcidev = comedi_to_pci_dev(dev); + const struct mf6x4_board *board = NULL; + struct mf6x4_private *devpriv; + struct comedi_subdevice *s; + int ret; + + if (context < ARRAY_SIZE(mf6x4_boards)) + board = &mf6x4_boards[context]; + else + return -ENODEV; + + dev->board_ptr = board; + dev->board_name = board->name; + + ret = comedi_pci_enable(dev); + if (ret) + return ret; + + devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv)); + if (!devpriv) + return -ENOMEM; + + devpriv->bar0_mem = pci_ioremap_bar(pcidev, board->bar_nums[0]); + if (!devpriv->bar0_mem) + return -ENODEV; + + devpriv->bar1_mem = pci_ioremap_bar(pcidev, board->bar_nums[1]); + if (!devpriv->bar1_mem) + return -ENODEV; + + devpriv->bar2_mem = pci_ioremap_bar(pcidev, board->bar_nums[2]); + if (!devpriv->bar2_mem) + return -ENODEV; + + if (board == &mf6x4_boards[BOARD_MF634]) + devpriv->gpioc_R = devpriv->bar2_mem + MF634_GPIOC_R; + else + devpriv->gpioc_R = devpriv->bar0_mem + MF624_GPIOC_R; + + + ret = comedi_alloc_subdevices(dev, 4); + if (ret) + return ret; + + /* ADC */ + s = &dev->subdevices[0]; + s->type = COMEDI_SUBD_AI; + s->subdev_flags = SDF_READABLE | SDF_GROUND; + s->n_chan = 8; + s->maxdata = 0x3fff; /* 14 bits ADC */ + s->range_table = &range_bipolar10; + s->insn_read = mf6x4_ai_insn_read; + + /* DAC */ + s = &dev->subdevices[1]; + s->type = COMEDI_SUBD_AO; + s->subdev_flags = SDF_WRITABLE; + s->n_chan = 8; + s->maxdata = 0x3fff; /* 14 bits DAC */ + s->range_table = &range_bipolar10; + s->insn_write = mf6x4_ao_insn_write; + s->insn_read = mf6x4_ao_insn_read; + + /* DIN */ + s = &dev->subdevices[2]; + s->type = COMEDI_SUBD_DI; + s->subdev_flags = SDF_READABLE; + s->n_chan = 8; + s->maxdata = 1; + s->range_table = &range_digital; + s->insn_bits = mf6x4_di_insn_bits; + + /* DOUT */ + s = &dev->subdevices[3]; + s->type = COMEDI_SUBD_DO; + s->subdev_flags = SDF_WRITABLE; + s->n_chan = 8; + s->maxdata = 1; + s->range_table = &range_digital; + s->insn_bits = mf6x4_do_insn_bits; + + return 0; +} + +static void mf6x4_detach(struct comedi_device *dev) +{ + struct mf6x4_private *devpriv = dev->private; + + if (devpriv->bar0_mem) + iounmap(devpriv->bar0_mem); + if (devpriv->bar1_mem) + iounmap(devpriv->bar1_mem); + if (devpriv->bar2_mem) + iounmap(devpriv->bar2_mem); + + comedi_pci_disable(dev); +} + +static struct comedi_driver mf6x4_driver = { + .driver_name = "mf6x4", + .module = THIS_MODULE, + .auto_attach = mf6x4_auto_attach, + .detach = mf6x4_detach, +}; + +static int mf6x4_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + return comedi_pci_auto_config(dev, &mf6x4_driver, id->driver_data); +} + +static const struct pci_device_id mf6x4_pci_table[] = { + { PCI_VDEVICE(HUMUSOFT, 0x0634), BOARD_MF634 }, + { PCI_VDEVICE(HUMUSOFT, 0x0624), BOARD_MF624 }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, mf6x4_pci_table); + +static struct pci_driver mf6x4_pci_driver = { + .name = "mf6x4", + .id_table = mf6x4_pci_table, + .probe = mf6x4_pci_probe, + .remove = comedi_pci_auto_unconfig, +}; + +module_comedi_pci_driver(mf6x4_driver, mf6x4_pci_driver); + +MODULE_AUTHOR("Rostislav Lisovy <lisovy@gmail.com>"); +MODULE_DESCRIPTION("Comedi MF634 and MF624 DAQ cards driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/mite.c b/drivers/staging/comedi/drivers/mite.c index 35cb4ace7970..9c9a0ee432cf 100644 --- a/drivers/staging/comedi/drivers/mite.c +++ b/drivers/staging/comedi/drivers/mite.c @@ -288,7 +288,6 @@ void mite_dma_arm(struct mite_channel *mite_chan) int chor; unsigned long flags; - MDPRINTK("mite_dma_arm ch%i\n", mite_chan->channel); /* * memory barrier is intended to insure any twiddling with the buffer * is done before writing to the mite to arm dma transfer @@ -329,8 +328,6 @@ int mite_buf_change(struct mite_dma_descriptor_ring *ring, n_links = async->prealloc_bufsz >> PAGE_SHIFT; - MDPRINTK("ring->hw_dev=%p, n_links=0x%04x\n", ring->hw_dev, n_links); - ring->descriptors = dma_alloc_coherent(ring->hw_dev, n_links * sizeof(struct mite_dma_descriptor), @@ -345,7 +342,7 @@ int mite_buf_change(struct mite_dma_descriptor_ring *ring, for (i = 0; i < n_links; i++) { ring->descriptors[i].count = cpu_to_le32(PAGE_SIZE); ring->descriptors[i].addr = - cpu_to_le32(async->buf_page_list[i].dma_addr); + cpu_to_le32(async->buf_map->page_list[i].dma_addr); ring->descriptors[i].next = cpu_to_le32(ring->descriptors_dma_addr + (i + 1) * @@ -368,8 +365,6 @@ void mite_prep_dma(struct mite_channel *mite_chan, unsigned int chor, chcr, mcr, dcr, lkcr; struct mite_struct *mite = mite_chan->mite; - MDPRINTK("mite_prep_dma ch%i\n", mite_chan->channel); - /* reset DMA and FIFO */ chor = CHOR_DMARESET | CHOR_FRESET; writel(chor, mite->mite_io_addr + MITE_CHOR(mite_chan->channel)); @@ -448,8 +443,6 @@ void mite_prep_dma(struct mite_channel *mite_chan, /* starting address for link chaining */ writel(mite_chan->ring->descriptors_dma_addr, mite->mite_io_addr + MITE_LKAR(mite_chan->channel)); - - MDPRINTK("exit mite_prep_dma\n"); } EXPORT_SYMBOL_GPL(mite_prep_dma); @@ -515,8 +508,6 @@ unsigned mite_dma_tcr(struct mite_channel *mite_chan) lkar = readl(mite->mite_io_addr + MITE_LKAR(mite_chan->channel)); tcr = readl(mite->mite_io_addr + MITE_TCR(mite_chan->channel)); - MDPRINTK("mite_dma_tcr ch%i, lkar=0x%08x tcr=%d\n", mite_chan->channel, - lkar, tcr); return tcr; } @@ -642,140 +633,6 @@ int mite_done(struct mite_channel *mite_chan) } EXPORT_SYMBOL_GPL(mite_done); -#ifdef DEBUG_MITE - -/* names of bits in mite registers */ - -static const char *const mite_CHOR_strings[] = { - "start", "cont", "stop", "abort", - "freset", "clrlc", "clrrb", "clrdone", - "clr_lpause", "set_lpause", "clr_send_tc", - "set_send_tc", "12", "13", "14", - "15", "16", "17", "18", - "19", "20", "21", "22", - "23", "24", "25", "26", - "27", "28", "29", "30", - "dmareset", -}; - -static const char *const mite_CHCR_strings[] = { - "continue", "ringbuff", "2", "3", - "4", "5", "6", "7", - "8", "9", "10", "11", - "12", "13", "bursten", "fifodis", - "clr_cont_rb_ie", "set_cont_rb_ie", "clr_lc_ie", "set_lc_ie", - "clr_drdy_ie", "set_drdy_ie", "clr_mrdy_ie", "set_mrdy_ie", - "clr_done_ie", "set_done_ie", "clr_sar_ie", "set_sar_ie", - "clr_linkp_ie", "set_linkp_ie", "clr_dma_ie", "set_dma_ie", -}; - -static const char *const mite_MCR_strings[] = { - "amdevice", "1", "2", "3", - "4", "5", "portio", "portvxi", - "psizebyte", "psizehalf (byte & half = word)", "aseqxp1", "11", - "12", "13", "blocken", "berhand", - "reqsintlim/reqs0", "reqs1", "reqs2", "rd32", - "rd512", "rl1", "rl2", "rl8", - "24", "25", "26", "27", - "28", "29", "30", "stopen", -}; - -static const char *const mite_DCR_strings[] = { - "amdevice", "1", "2", "3", - "4", "5", "portio", "portvxi", - "psizebyte", "psizehalf (byte & half = word)", "aseqxp1", "aseqxp2", - "aseqxp8", "13", "blocken", "berhand", - "reqsintlim", "reqs1", "reqs2", "rd32", - "rd512", "rl1", "rl2", "rl8", - "23", "24", "25", "27", - "28", "wsdevc", "wsdevs", "rwdevpack", -}; - -static const char *const mite_LKCR_strings[] = { - "amdevice", "1", "2", "3", - "4", "5", "portio", "portvxi", - "psizebyte", "psizehalf (byte & half = word)", "asequp", "aseqdown", - "12", "13", "14", "berhand", - "16", "17", "18", "rd32", - "rd512", "rl1", "rl2", "rl8", - "24", "25", "26", "27", - "28", "29", "30", "chngend", -}; - -static const char *const mite_CHSR_strings[] = { - "d.err0", "d.err1", "m.err0", "m.err1", - "l.err0", "l.err1", "drq0", "drq1", - "end", "xferr", "operr0", "operr1", - "stops", "habort", "sabort", "error", - "16", "conts_rb", "18", "linkc", - "20", "drdy", "22", "mrdy", - "24", "done", "26", "sars", - "28", "lpauses", "30", "int", -}; - -static void mite_decode(const char *const *bit_str, unsigned int bits) -{ - int i; - - for (i = 31; i >= 0; i--) { - if (bits & (1 << i)) - pr_debug(" %s\n", bit_str[i]); - } -} - -void mite_dump_regs(struct mite_channel *mite_chan) -{ - void __iomem *mite_io_addr = mite_chan->mite->mite_io_addr; - unsigned int offset; - unsigned int value; - int channel = mite_chan->channel; - - pr_debug("mite_dump_regs ch%i\n", channel); - pr_debug("mite address is =%p\n", mite_io_addr); - - offset = MITE_CHOR(channel); - value = readl(mite_io_addr + offset); - pr_debug("mite status[CHOR] at 0x%08x =0x%08x\n", offset, value); - mite_decode(mite_CHOR_strings, value); - offset = MITE_CHCR(channel); - value = readl(mite_io_addr + offset); - pr_debug("mite status[CHCR] at 0x%08x =0x%08x\n", offset, value); - mite_decode(mite_CHCR_strings, value); - offset = MITE_TCR(channel); - value = readl(mite_io_addr + offset); - pr_debug("mite status[TCR] at 0x%08x =0x%08x\n", offset, value); - offset = MITE_MCR(channel); - value = readl(mite_io_addr + offset); - pr_debug("mite status[MCR] at 0x%08x =0x%08x\n", offset, value); - mite_decode(mite_MCR_strings, value); - offset = MITE_MAR(channel); - value = readl(mite_io_addr + offset); - pr_debug("mite status[MAR] at 0x%08x =0x%08x\n", offset, value); - offset = MITE_DCR(channel); - value = readl(mite_io_addr + offset); - pr_debug("mite status[DCR] at 0x%08x =0x%08x\n", offset, value); - mite_decode(mite_DCR_strings, value); - offset = MITE_DAR(channel); - value = readl(mite_io_addr + offset); - pr_debug("mite status[DAR] at 0x%08x =0x%08x\n", offset, value); - offset = MITE_LKCR(channel); - value = readl(mite_io_addr + offset); - pr_debug("mite status[LKCR] at 0x%08x =0x%08x\n", offset, value); - mite_decode(mite_LKCR_strings, value); - offset = MITE_LKAR(channel); - value = readl(mite_io_addr + offset); - pr_debug("mite status[LKAR] at 0x%08x =0x%08x\n", offset, value); - offset = MITE_CHSR(channel); - value = readl(mite_io_addr + offset); - pr_debug("mite status[CHSR] at 0x%08x =0x%08x\n", offset, value); - mite_decode(mite_CHSR_strings, value); - offset = MITE_FCR(channel); - value = readl(mite_io_addr + offset); - pr_debug("mite status[FCR] at 0x%08x =0x%08x\n", offset, value); -} -EXPORT_SYMBOL_GPL(mite_dump_regs); -#endif - static int __init mite_module_init(void) { return 0; diff --git a/drivers/staging/comedi/drivers/mite.h b/drivers/staging/comedi/drivers/mite.h index 8423b8bf3384..bcf2f972376e 100644 --- a/drivers/staging/comedi/drivers/mite.h +++ b/drivers/staging/comedi/drivers/mite.h @@ -24,15 +24,8 @@ #include <linux/slab.h> #include "../comedidev.h" -/* #define DEBUG_MITE */ #define PCIMIO_COMPAT -#ifdef DEBUG_MITE -#define MDPRINTK(format, args...) pr_debug(format , ## args) -#else -#define MDPRINTK(format, args...) do { } while (0) -#endif - #define MAX_MITE_DMA_CHANNELS 8 struct mite_dma_descriptor { @@ -129,11 +122,6 @@ void mite_prep_dma(struct mite_channel *mite_chan, int mite_buf_change(struct mite_dma_descriptor_ring *ring, struct comedi_async *async); -#ifdef DEBUG_MITE -void mite_print_chsr(unsigned int chsr); -void mite_dump_regs(struct mite_channel *mite_chan); -#endif - static inline int CHAN_OFFSET(int channel) { return 0x500 + 0x100 * channel; diff --git a/drivers/staging/comedi/drivers/mpc624.c b/drivers/staging/comedi/drivers/mpc624.c index acbaeee6250c..fe4621ea65c3 100644 --- a/drivers/staging/comedi/drivers/mpc624.c +++ b/drivers/staging/comedi/drivers/mpc624.c @@ -159,11 +159,6 @@ static int mpc624_ai_rinsn(struct comedi_device *dev, * We always write 0 to GNSWA bit, so the channel range is +-/10.1Vdc */ outb(insn->chanspec, dev->iobase + MPC624_GNMUXCH); -/* printk("Channel %d:\n", insn->chanspec); */ - if (!insn->n) { - printk(KERN_INFO "MPC624: Warning, no data to acquire\n"); - return 0; - } for (n = 0; n < insn->n; n++) { /* Trigger the conversion */ @@ -182,11 +177,9 @@ static int mpc624_ai_rinsn(struct comedi_device *dev, else break; } - if (i == TIMEOUT) { - printk(KERN_ERR "MPC624: timeout (%dms)\n", TIMEOUT); - data[n] = 0; + if (i == TIMEOUT) return -ETIMEDOUT; - } + /* Start reading data */ data_in = 0; data_out = devpriv->ulConvertionRate; @@ -245,11 +238,11 @@ static int mpc624_ai_rinsn(struct comedi_device *dev, */ if (data_in & MPC624_EOC_BIT) - printk(KERN_INFO "MPC624:EOC bit is set (data_in=%lu)!", - data_in); + dev_dbg(dev->class_dev, + "EOC bit is set (data_in=%lu)!", data_in); if (data_in & MPC624_DMY_BIT) - printk(KERN_INFO "MPC624:DMY bit is set (data_in=%lu)!", - data_in); + dev_dbg(dev->class_dev, + "DMY bit is set (data_in=%lu)!", data_in); if (data_in & MPC624_SGN_BIT) { /* Volatge is positive */ /* * comedi operates on unsigned numbers, so mask off EOC diff --git a/drivers/staging/comedi/drivers/ni_6527.c b/drivers/staging/comedi/drivers/ni_6527.c index 85aa9609d6a2..860fc81fb11c 100644 --- a/drivers/staging/comedi/drivers/ni_6527.c +++ b/drivers/staging/comedi/drivers/ni_6527.c @@ -455,7 +455,7 @@ static int ni6527_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &ni6527_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(ni6527_pci_table) = { +static const struct pci_device_id ni6527_pci_table[] = { { PCI_VDEVICE(NI, 0x2b10), BOARD_PXI6527 }, { PCI_VDEVICE(NI, 0x2b20), BOARD_PCI6527 }, { 0 } diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c index 853f62b2b1a9..6e42001f686e 100644 --- a/drivers/staging/comedi/drivers/ni_65xx.c +++ b/drivers/staging/comedi/drivers/ni_65xx.c @@ -43,9 +43,6 @@ except maybe the 6514. */ -#define DEBUG 1 -#define DEBUG_FLAGS - #include <linux/module.h> #include <linux/pci.h> #include <linux/interrupt.h> @@ -430,7 +427,7 @@ static irqreturn_t ni_65xx_interrupt(int irq, void *d) { struct comedi_device *dev = d; struct ni_65xx_private *devpriv = dev->private; - struct comedi_subdevice *s = &dev->subdevices[2]; + struct comedi_subdevice *s = dev->read_subdev; unsigned int status; status = readb(devpriv->mite->daq_io_addr + Change_Status); @@ -741,7 +738,7 @@ static int ni_65xx_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &ni_65xx_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(ni_65xx_pci_table) = { +static const struct pci_device_id ni_65xx_pci_table[] = { { PCI_VDEVICE(NI, 0x1710), BOARD_PXI6509 }, { PCI_VDEVICE(NI, 0x7085), BOARD_PCI6509 }, { PCI_VDEVICE(NI, 0x7086), BOARD_PXI6528 }, diff --git a/drivers/staging/comedi/drivers/ni_660x.c b/drivers/staging/comedi/drivers/ni_660x.c index 8a991dcab24a..df42e3906171 100644 --- a/drivers/staging/comedi/drivers/ni_660x.c +++ b/drivers/staging/comedi/drivers/ni_660x.c @@ -55,112 +55,112 @@ for 4 */ #define MAX_DMA_CHANNEL 4 /* See Register-Level Programmer Manual page 3.1 */ -enum NI_660x_Register { - G0InterruptAcknowledge, - G0StatusRegister, - G1InterruptAcknowledge, - G1StatusRegister, - G01StatusRegister, - G0CommandRegister, - STCDIOParallelInput, - G1CommandRegister, - G0HWSaveRegister, - G1HWSaveRegister, - STCDIOOutput, - STCDIOControl, - G0SWSaveRegister, - G1SWSaveRegister, - G0ModeRegister, - G01JointStatus1Register, - G1ModeRegister, - STCDIOSerialInput, - G0LoadARegister, - G01JointStatus2Register, - G0LoadBRegister, - G1LoadARegister, - G1LoadBRegister, - G0InputSelectRegister, - G1InputSelectRegister, - G0AutoincrementRegister, - G1AutoincrementRegister, - G01JointResetRegister, - G0InterruptEnable, - G1InterruptEnable, - G0CountingModeRegister, - G1CountingModeRegister, - G0SecondGateRegister, - G1SecondGateRegister, - G0DMAConfigRegister, - G0DMAStatusRegister, - G1DMAConfigRegister, - G1DMAStatusRegister, - G2InterruptAcknowledge, - G2StatusRegister, - G3InterruptAcknowledge, - G3StatusRegister, - G23StatusRegister, - G2CommandRegister, - G3CommandRegister, - G2HWSaveRegister, - G3HWSaveRegister, - G2SWSaveRegister, - G3SWSaveRegister, - G2ModeRegister, - G23JointStatus1Register, - G3ModeRegister, - G2LoadARegister, - G23JointStatus2Register, - G2LoadBRegister, - G3LoadARegister, - G3LoadBRegister, - G2InputSelectRegister, - G3InputSelectRegister, - G2AutoincrementRegister, - G3AutoincrementRegister, - G23JointResetRegister, - G2InterruptEnable, - G3InterruptEnable, - G2CountingModeRegister, - G3CountingModeRegister, - G3SecondGateRegister, - G2SecondGateRegister, - G2DMAConfigRegister, - G2DMAStatusRegister, - G3DMAConfigRegister, - G3DMAStatusRegister, - DIO32Input, - DIO32Output, - ClockConfigRegister, - GlobalInterruptStatusRegister, - DMAConfigRegister, - GlobalInterruptConfigRegister, - IOConfigReg0_1, - IOConfigReg2_3, - IOConfigReg4_5, - IOConfigReg6_7, - IOConfigReg8_9, - IOConfigReg10_11, - IOConfigReg12_13, - IOConfigReg14_15, - IOConfigReg16_17, - IOConfigReg18_19, - IOConfigReg20_21, - IOConfigReg22_23, - IOConfigReg24_25, - IOConfigReg26_27, - IOConfigReg28_29, - IOConfigReg30_31, - IOConfigReg32_33, - IOConfigReg34_35, - IOConfigReg36_37, - IOConfigReg38_39, - NumRegisters, +enum ni_660x_register { + NI660X_G0_INT_ACK, + NI660X_G0_STATUS, + NI660X_G1_INT_ACK, + NI660X_G1_STATUS, + NI660X_G01_STATUS, + NI660X_G0_CMD, + NI660X_STC_DIO_PARALLEL_INPUT, + NI660X_G1_CMD, + NI660X_G0_HW_SAVE, + NI660X_G1_HW_SAVE, + NI660X_STC_DIO_OUTPUT, + NI660X_STC_DIO_CONTROL, + NI660X_G0_SW_SAVE, + NI660X_G1_SW_SAVE, + NI660X_G0_MODE, + NI660X_G01_STATUS1, + NI660X_G1_MODE, + NI660X_STC_DIO_SERIAL_INPUT, + NI660X_G0_LOADA, + NI660X_G01_STATUS2, + NI660X_G0_LOADB, + NI660X_G1_LOADA, + NI660X_G1_LOADB, + NI660X_G0_INPUT_SEL, + NI660X_G1_INPUT_SEL, + NI660X_G0_AUTO_INC, + NI660X_G1_AUTO_INC, + NI660X_G01_RESET, + NI660X_G0_INT_ENA, + NI660X_G1_INT_ENA, + NI660X_G0_CNT_MODE, + NI660X_G1_CNT_MODE, + NI660X_G0_GATE2, + NI660X_G1_GATE2, + NI660X_G0_DMA_CFG, + NI660X_G0_DMA_STATUS, + NI660X_G1_DMA_CFG, + NI660X_G1_DMA_STATUS, + NI660X_G2_INT_ACK, + NI660X_G2_STATUS, + NI660X_G3_INT_ACK, + NI660X_G3_STATUS, + NI660X_G23_STATUS, + NI660X_G2_CMD, + NI660X_G3_CMD, + NI660X_G2_HW_SAVE, + NI660X_G3_HW_SAVE, + NI660X_G2_SW_SAVE, + NI660X_G3_SW_SAVE, + NI660X_G2_MODE, + NI660X_G23_STATUS1, + NI660X_G3_MODE, + NI660X_G2_LOADA, + NI660X_G23_STATUS2, + NI660X_G2_LOADB, + NI660X_G3_LOADA, + NI660X_G3_LOADB, + NI660X_G2_INPUT_SEL, + NI660X_G3_INPUT_SEL, + NI660X_G2_AUTO_INC, + NI660X_G3_AUTO_INC, + NI660X_G23_RESET, + NI660X_G2_INT_ENA, + NI660X_G3_INT_ENA, + NI660X_G2_CNT_MODE, + NI660X_G3_CNT_MODE, + NI660X_G3_GATE2, + NI660X_G2_GATE2, + NI660X_G2_DMA_CFG, + NI660X_G2_DMA_STATUS, + NI660X_G3_DMA_CFG, + NI660X_G3_DMA_STATUS, + NI660X_DIO32_INPUT, + NI660X_DIO32_OUTPUT, + NI660X_CLK_CFG, + NI660X_GLOBAL_INT_STATUS, + NI660X_DMA_CFG, + NI660X_GLOBAL_INT_CFG, + NI660X_IO_CFG_0_1, + NI660X_IO_CFG_2_3, + NI660X_IO_CFG_4_5, + NI660X_IO_CFG_6_7, + NI660X_IO_CFG_8_9, + NI660X_IO_CFG_10_11, + NI660X_IO_CFG_12_13, + NI660X_IO_CFG_14_15, + NI660X_IO_CFG_16_17, + NI660X_IO_CFG_18_19, + NI660X_IO_CFG_20_21, + NI660X_IO_CFG_22_23, + NI660X_IO_CFG_24_25, + NI660X_IO_CFG_26_27, + NI660X_IO_CFG_28_29, + NI660X_IO_CFG_30_31, + NI660X_IO_CFG_32_33, + NI660X_IO_CFG_34_35, + NI660X_IO_CFG_36_37, + NI660X_IO_CFG_38_39, + NI660X_NUM_REGS, }; static inline unsigned IOConfigReg(unsigned pfi_channel) { - unsigned reg = IOConfigReg0_1 + pfi_channel / 2; - BUG_ON(reg > IOConfigReg38_39); + unsigned reg = NI660X_IO_CFG_0_1 + pfi_channel / 2; + BUG_ON(reg > NI660X_IO_CFG_38_39); return reg; } @@ -200,7 +200,7 @@ struct NI_660xRegisterData { enum ni_660x_register_width size; /* 1 byte, 2 bytes, or 4 bytes */ }; -static const struct NI_660xRegisterData registerData[NumRegisters] = { +static const struct NI_660xRegisterData registerData[NI660X_NUM_REGS] = { {"G0 Interrupt Acknowledge", 0x004, NI_660x_WRITE, DATA_2B}, {"G0 Status Register", 0x004, NI_660x_READ, DATA_2B}, {"G1 Interrupt Acknowledge", 0x006, NI_660x_WRITE, DATA_2B}, @@ -347,11 +347,6 @@ static inline unsigned dma_select_mask(unsigned dma_channel) enum dma_selection { dma_selection_none = 0x1f, }; -static inline unsigned dma_selection_counter(unsigned counter_index) -{ - BUG_ON(counter_index >= counters_per_chip); - return counter_index; -} static inline unsigned dma_select_bits(unsigned dma_channel, unsigned selection) { @@ -444,229 +439,158 @@ static inline unsigned ni_660x_num_counters(struct comedi_device *dev) return board->n_chips * counters_per_chip; } -static enum NI_660x_Register ni_gpct_to_660x_register(enum ni_gpct_register reg) +static enum ni_660x_register ni_gpct_to_660x_register(enum ni_gpct_register reg) { - enum NI_660x_Register ni_660x_register; switch (reg) { - case NITIO_G0_Autoincrement_Reg: - ni_660x_register = G0AutoincrementRegister; - break; - case NITIO_G1_Autoincrement_Reg: - ni_660x_register = G1AutoincrementRegister; - break; - case NITIO_G2_Autoincrement_Reg: - ni_660x_register = G2AutoincrementRegister; - break; - case NITIO_G3_Autoincrement_Reg: - ni_660x_register = G3AutoincrementRegister; - break; - case NITIO_G0_Command_Reg: - ni_660x_register = G0CommandRegister; - break; - case NITIO_G1_Command_Reg: - ni_660x_register = G1CommandRegister; - break; - case NITIO_G2_Command_Reg: - ni_660x_register = G2CommandRegister; - break; - case NITIO_G3_Command_Reg: - ni_660x_register = G3CommandRegister; - break; - case NITIO_G0_HW_Save_Reg: - ni_660x_register = G0HWSaveRegister; - break; - case NITIO_G1_HW_Save_Reg: - ni_660x_register = G1HWSaveRegister; - break; - case NITIO_G2_HW_Save_Reg: - ni_660x_register = G2HWSaveRegister; - break; - case NITIO_G3_HW_Save_Reg: - ni_660x_register = G3HWSaveRegister; - break; - case NITIO_G0_SW_Save_Reg: - ni_660x_register = G0SWSaveRegister; - break; - case NITIO_G1_SW_Save_Reg: - ni_660x_register = G1SWSaveRegister; - break; - case NITIO_G2_SW_Save_Reg: - ni_660x_register = G2SWSaveRegister; - break; - case NITIO_G3_SW_Save_Reg: - ni_660x_register = G3SWSaveRegister; - break; - case NITIO_G0_Mode_Reg: - ni_660x_register = G0ModeRegister; - break; - case NITIO_G1_Mode_Reg: - ni_660x_register = G1ModeRegister; - break; - case NITIO_G2_Mode_Reg: - ni_660x_register = G2ModeRegister; - break; - case NITIO_G3_Mode_Reg: - ni_660x_register = G3ModeRegister; - break; - case NITIO_G0_LoadA_Reg: - ni_660x_register = G0LoadARegister; - break; - case NITIO_G1_LoadA_Reg: - ni_660x_register = G1LoadARegister; - break; - case NITIO_G2_LoadA_Reg: - ni_660x_register = G2LoadARegister; - break; - case NITIO_G3_LoadA_Reg: - ni_660x_register = G3LoadARegister; - break; - case NITIO_G0_LoadB_Reg: - ni_660x_register = G0LoadBRegister; - break; - case NITIO_G1_LoadB_Reg: - ni_660x_register = G1LoadBRegister; - break; - case NITIO_G2_LoadB_Reg: - ni_660x_register = G2LoadBRegister; - break; - case NITIO_G3_LoadB_Reg: - ni_660x_register = G3LoadBRegister; - break; - case NITIO_G0_Input_Select_Reg: - ni_660x_register = G0InputSelectRegister; - break; - case NITIO_G1_Input_Select_Reg: - ni_660x_register = G1InputSelectRegister; - break; - case NITIO_G2_Input_Select_Reg: - ni_660x_register = G2InputSelectRegister; - break; - case NITIO_G3_Input_Select_Reg: - ni_660x_register = G3InputSelectRegister; - break; - case NITIO_G01_Status_Reg: - ni_660x_register = G01StatusRegister; - break; - case NITIO_G23_Status_Reg: - ni_660x_register = G23StatusRegister; - break; - case NITIO_G01_Joint_Reset_Reg: - ni_660x_register = G01JointResetRegister; - break; - case NITIO_G23_Joint_Reset_Reg: - ni_660x_register = G23JointResetRegister; - break; - case NITIO_G01_Joint_Status1_Reg: - ni_660x_register = G01JointStatus1Register; - break; - case NITIO_G23_Joint_Status1_Reg: - ni_660x_register = G23JointStatus1Register; - break; - case NITIO_G01_Joint_Status2_Reg: - ni_660x_register = G01JointStatus2Register; - break; - case NITIO_G23_Joint_Status2_Reg: - ni_660x_register = G23JointStatus2Register; - break; - case NITIO_G0_Counting_Mode_Reg: - ni_660x_register = G0CountingModeRegister; - break; - case NITIO_G1_Counting_Mode_Reg: - ni_660x_register = G1CountingModeRegister; - break; - case NITIO_G2_Counting_Mode_Reg: - ni_660x_register = G2CountingModeRegister; - break; - case NITIO_G3_Counting_Mode_Reg: - ni_660x_register = G3CountingModeRegister; - break; - case NITIO_G0_Second_Gate_Reg: - ni_660x_register = G0SecondGateRegister; - break; - case NITIO_G1_Second_Gate_Reg: - ni_660x_register = G1SecondGateRegister; - break; - case NITIO_G2_Second_Gate_Reg: - ni_660x_register = G2SecondGateRegister; - break; - case NITIO_G3_Second_Gate_Reg: - ni_660x_register = G3SecondGateRegister; - break; - case NITIO_G0_DMA_Config_Reg: - ni_660x_register = G0DMAConfigRegister; - break; - case NITIO_G0_DMA_Status_Reg: - ni_660x_register = G0DMAStatusRegister; - break; - case NITIO_G1_DMA_Config_Reg: - ni_660x_register = G1DMAConfigRegister; - break; - case NITIO_G1_DMA_Status_Reg: - ni_660x_register = G1DMAStatusRegister; - break; - case NITIO_G2_DMA_Config_Reg: - ni_660x_register = G2DMAConfigRegister; - break; - case NITIO_G2_DMA_Status_Reg: - ni_660x_register = G2DMAStatusRegister; - break; - case NITIO_G3_DMA_Config_Reg: - ni_660x_register = G3DMAConfigRegister; - break; - case NITIO_G3_DMA_Status_Reg: - ni_660x_register = G3DMAStatusRegister; - break; - case NITIO_G0_Interrupt_Acknowledge_Reg: - ni_660x_register = G0InterruptAcknowledge; - break; - case NITIO_G1_Interrupt_Acknowledge_Reg: - ni_660x_register = G1InterruptAcknowledge; - break; - case NITIO_G2_Interrupt_Acknowledge_Reg: - ni_660x_register = G2InterruptAcknowledge; - break; - case NITIO_G3_Interrupt_Acknowledge_Reg: - ni_660x_register = G3InterruptAcknowledge; - break; - case NITIO_G0_Status_Reg: - ni_660x_register = G0StatusRegister; - break; - case NITIO_G1_Status_Reg: - ni_660x_register = G1StatusRegister; - break; - case NITIO_G2_Status_Reg: - ni_660x_register = G2StatusRegister; - break; - case NITIO_G3_Status_Reg: - ni_660x_register = G3StatusRegister; - break; - case NITIO_G0_Interrupt_Enable_Reg: - ni_660x_register = G0InterruptEnable; - break; - case NITIO_G1_Interrupt_Enable_Reg: - ni_660x_register = G1InterruptEnable; - break; - case NITIO_G2_Interrupt_Enable_Reg: - ni_660x_register = G2InterruptEnable; - break; - case NITIO_G3_Interrupt_Enable_Reg: - ni_660x_register = G3InterruptEnable; - break; + case NITIO_G0_AUTO_INC: + return NI660X_G0_AUTO_INC; + case NITIO_G1_AUTO_INC: + return NI660X_G1_AUTO_INC; + case NITIO_G2_AUTO_INC: + return NI660X_G2_AUTO_INC; + case NITIO_G3_AUTO_INC: + return NI660X_G3_AUTO_INC; + case NITIO_G0_CMD: + return NI660X_G0_CMD; + case NITIO_G1_CMD: + return NI660X_G1_CMD; + case NITIO_G2_CMD: + return NI660X_G2_CMD; + case NITIO_G3_CMD: + return NI660X_G3_CMD; + case NITIO_G0_HW_SAVE: + return NI660X_G0_HW_SAVE; + case NITIO_G1_HW_SAVE: + return NI660X_G1_HW_SAVE; + case NITIO_G2_HW_SAVE: + return NI660X_G2_HW_SAVE; + case NITIO_G3_HW_SAVE: + return NI660X_G3_HW_SAVE; + case NITIO_G0_SW_SAVE: + return NI660X_G0_SW_SAVE; + case NITIO_G1_SW_SAVE: + return NI660X_G1_SW_SAVE; + case NITIO_G2_SW_SAVE: + return NI660X_G2_SW_SAVE; + case NITIO_G3_SW_SAVE: + return NI660X_G3_SW_SAVE; + case NITIO_G0_MODE: + return NI660X_G0_MODE; + case NITIO_G1_MODE: + return NI660X_G1_MODE; + case NITIO_G2_MODE: + return NI660X_G2_MODE; + case NITIO_G3_MODE: + return NI660X_G3_MODE; + case NITIO_G0_LOADA: + return NI660X_G0_LOADA; + case NITIO_G1_LOADA: + return NI660X_G1_LOADA; + case NITIO_G2_LOADA: + return NI660X_G2_LOADA; + case NITIO_G3_LOADA: + return NI660X_G3_LOADA; + case NITIO_G0_LOADB: + return NI660X_G0_LOADB; + case NITIO_G1_LOADB: + return NI660X_G1_LOADB; + case NITIO_G2_LOADB: + return NI660X_G2_LOADB; + case NITIO_G3_LOADB: + return NI660X_G3_LOADB; + case NITIO_G0_INPUT_SEL: + return NI660X_G0_INPUT_SEL; + case NITIO_G1_INPUT_SEL: + return NI660X_G1_INPUT_SEL; + case NITIO_G2_INPUT_SEL: + return NI660X_G2_INPUT_SEL; + case NITIO_G3_INPUT_SEL: + return NI660X_G3_INPUT_SEL; + case NITIO_G01_STATUS: + return NI660X_G01_STATUS; + case NITIO_G23_STATUS: + return NI660X_G23_STATUS; + case NITIO_G01_RESET: + return NI660X_G01_RESET; + case NITIO_G23_RESET: + return NI660X_G23_RESET; + case NITIO_G01_STATUS1: + return NI660X_G01_STATUS1; + case NITIO_G23_STATUS1: + return NI660X_G23_STATUS1; + case NITIO_G01_STATUS2: + return NI660X_G01_STATUS2; + case NITIO_G23_STATUS2: + return NI660X_G23_STATUS2; + case NITIO_G0_CNT_MODE: + return NI660X_G0_CNT_MODE; + case NITIO_G1_CNT_MODE: + return NI660X_G1_CNT_MODE; + case NITIO_G2_CNT_MODE: + return NI660X_G2_CNT_MODE; + case NITIO_G3_CNT_MODE: + return NI660X_G3_CNT_MODE; + case NITIO_G0_GATE2: + return NI660X_G0_GATE2; + case NITIO_G1_GATE2: + return NI660X_G1_GATE2; + case NITIO_G2_GATE2: + return NI660X_G2_GATE2; + case NITIO_G3_GATE2: + return NI660X_G3_GATE2; + case NITIO_G0_DMA_CFG: + return NI660X_G0_DMA_CFG; + case NITIO_G0_DMA_STATUS: + return NI660X_G0_DMA_STATUS; + case NITIO_G1_DMA_CFG: + return NI660X_G1_DMA_CFG; + case NITIO_G1_DMA_STATUS: + return NI660X_G1_DMA_STATUS; + case NITIO_G2_DMA_CFG: + return NI660X_G2_DMA_CFG; + case NITIO_G2_DMA_STATUS: + return NI660X_G2_DMA_STATUS; + case NITIO_G3_DMA_CFG: + return NI660X_G3_DMA_CFG; + case NITIO_G3_DMA_STATUS: + return NI660X_G3_DMA_STATUS; + case NITIO_G0_INT_ACK: + return NI660X_G0_INT_ACK; + case NITIO_G1_INT_ACK: + return NI660X_G1_INT_ACK; + case NITIO_G2_INT_ACK: + return NI660X_G2_INT_ACK; + case NITIO_G3_INT_ACK: + return NI660X_G3_INT_ACK; + case NITIO_G0_STATUS: + return NI660X_G0_STATUS; + case NITIO_G1_STATUS: + return NI660X_G1_STATUS; + case NITIO_G2_STATUS: + return NI660X_G2_STATUS; + case NITIO_G3_STATUS: + return NI660X_G3_STATUS; + case NITIO_G0_INT_ENA: + return NI660X_G0_INT_ENA; + case NITIO_G1_INT_ENA: + return NI660X_G1_INT_ENA; + case NITIO_G2_INT_ENA: + return NI660X_G2_INT_ENA; + case NITIO_G3_INT_ENA: + return NI660X_G3_INT_ENA; default: BUG(); return 0; - break; } - return ni_660x_register; } static inline void ni_660x_write_register(struct comedi_device *dev, - unsigned chip_index, unsigned bits, - enum NI_660x_Register reg) + unsigned chip, unsigned bits, + enum ni_660x_register reg) { struct ni_660x_private *devpriv = dev->private; void __iomem *write_address = - devpriv->mite->daq_io_addr + GPCT_OFFSET[chip_index] + + devpriv->mite->daq_io_addr + GPCT_OFFSET[chip] + registerData[reg].offset; switch (registerData[reg].size) { @@ -683,12 +607,12 @@ static inline void ni_660x_write_register(struct comedi_device *dev, } static inline unsigned ni_660x_read_register(struct comedi_device *dev, - unsigned chip_index, - enum NI_660x_Register reg) + unsigned chip, + enum ni_660x_register reg) { struct ni_660x_private *devpriv = dev->private; void __iomem *read_address = - devpriv->mite->daq_io_addr + GPCT_OFFSET[chip_index] + + devpriv->mite->daq_io_addr + GPCT_OFFSET[chip] + registerData[reg].offset; switch (registerData[reg].size) { @@ -709,18 +633,20 @@ static void ni_gpct_write_register(struct ni_gpct *counter, unsigned bits, enum ni_gpct_register reg) { struct comedi_device *dev = counter->counter_dev->dev; - enum NI_660x_Register ni_660x_register = ni_gpct_to_660x_register(reg); - ni_660x_write_register(dev, counter->chip_index, bits, - ni_660x_register); + enum ni_660x_register ni_660x_register = ni_gpct_to_660x_register(reg); + unsigned chip = counter->chip_index; + + ni_660x_write_register(dev, chip, bits, ni_660x_register); } static unsigned ni_gpct_read_register(struct ni_gpct *counter, enum ni_gpct_register reg) { struct comedi_device *dev = counter->counter_dev->dev; - enum NI_660x_Register ni_660x_register = ni_gpct_to_660x_register(reg); - return ni_660x_read_register(dev, counter->chip_index, - ni_660x_register); + enum ni_660x_register ni_660x_register = ni_gpct_to_660x_register(reg); + unsigned chip = counter->chip_index; + + return ni_660x_read_register(dev, chip, ni_660x_register); } static inline struct mite_dma_descriptor_ring *mite_ring(struct ni_660x_private @@ -728,7 +654,9 @@ static inline struct mite_dma_descriptor_ring *mite_ring(struct ni_660x_private struct ni_gpct *counter) { - return priv->mite_rings[counter->chip_index][counter->counter_index]; + unsigned chip = counter->chip_index; + + return priv->mite_rings[chip][counter->counter_index]; } static inline void ni_660x_set_dma_channel(struct comedi_device *dev, @@ -736,18 +664,17 @@ static inline void ni_660x_set_dma_channel(struct comedi_device *dev, struct ni_gpct *counter) { struct ni_660x_private *devpriv = dev->private; + unsigned chip = counter->chip_index; unsigned long flags; spin_lock_irqsave(&devpriv->soft_reg_copy_lock, flags); - devpriv->dma_configuration_soft_copies[counter->chip_index] &= - ~dma_select_mask(mite_channel); - devpriv->dma_configuration_soft_copies[counter->chip_index] |= - dma_select_bits(mite_channel, - dma_selection_counter(counter->counter_index)); - ni_660x_write_register(dev, counter->chip_index, - devpriv->dma_configuration_soft_copies - [counter->chip_index] | - dma_reset_bit(mite_channel), DMAConfigRegister); + devpriv->dma_configuration_soft_copies[chip] &= + ~dma_select_mask(mite_channel); + devpriv->dma_configuration_soft_copies[chip] |= + dma_select_bits(mite_channel, counter->counter_index); + ni_660x_write_register(dev, chip, + devpriv->dma_configuration_soft_copies[chip] | + dma_reset_bit(mite_channel), NI660X_DMA_CFG); mmiowb(); spin_unlock_irqrestore(&devpriv->soft_reg_copy_lock, flags); } @@ -757,16 +684,17 @@ static inline void ni_660x_unset_dma_channel(struct comedi_device *dev, struct ni_gpct *counter) { struct ni_660x_private *devpriv = dev->private; + unsigned chip = counter->chip_index; unsigned long flags; spin_lock_irqsave(&devpriv->soft_reg_copy_lock, flags); - devpriv->dma_configuration_soft_copies[counter->chip_index] &= + devpriv->dma_configuration_soft_copies[chip] &= ~dma_select_mask(mite_channel); - devpriv->dma_configuration_soft_copies[counter->chip_index] |= + devpriv->dma_configuration_soft_copies[chip] |= dma_select_bits(mite_channel, dma_selection_none); - ni_660x_write_register(dev, counter->chip_index, - devpriv->dma_configuration_soft_copies - [counter->chip_index], DMAConfigRegister); + ni_660x_write_register(dev, chip, + devpriv->dma_configuration_soft_copies[chip], + NI660X_DMA_CFG); mmiowb(); spin_unlock_irqrestore(&devpriv->soft_reg_copy_lock, flags); } @@ -815,11 +743,9 @@ static void ni_660x_release_mite_channel(struct comedi_device *dev, static int ni_660x_cmd(struct comedi_device *dev, struct comedi_subdevice *s) { + struct ni_gpct *counter = s->private; int retval; - struct ni_gpct *counter = subdev_to_counter(s); -/* const struct comedi_cmd *cmd = &s->async->cmd; */ - retval = ni_660x_request_mite_channel(dev, counter, COMEDI_INPUT); if (retval) { comedi_error(dev, @@ -827,22 +753,13 @@ static int ni_660x_cmd(struct comedi_device *dev, struct comedi_subdevice *s) return retval; } ni_tio_acknowledge_and_confirm(counter, NULL, NULL, NULL, NULL); - retval = ni_tio_cmd(counter, s->async); - - return retval; -} - -static int ni_660x_cmdtest(struct comedi_device *dev, - struct comedi_subdevice *s, struct comedi_cmd *cmd) -{ - struct ni_gpct *counter = subdev_to_counter(s); - return ni_tio_cmdtest(counter, cmd); + return ni_tio_cmd(dev, s); } static int ni_660x_cancel(struct comedi_device *dev, struct comedi_subdevice *s) { - struct ni_gpct *counter = subdev_to_counter(s); + struct ni_gpct *counter = s->private; int retval; retval = ni_tio_cancel(counter); @@ -850,23 +767,28 @@ static int ni_660x_cancel(struct comedi_device *dev, struct comedi_subdevice *s) return retval; } -static void set_tio_counterswap(struct comedi_device *dev, int chipset) +static void set_tio_counterswap(struct comedi_device *dev, int chip) { - /* See P. 3.5 of the Register-Level Programming manual. The - CounterSwap bit has to be set on the second chip, otherwise - it will try to use the same pins as the first chip. + unsigned bits = 0; + + /* + * See P. 3.5 of the Register-Level Programming manual. + * The CounterSwap bit has to be set on the second chip, + * otherwise it will try to use the same pins as the + * first chip. */ - if (chipset) - ni_660x_write_register(dev, chipset, CounterSwap, - ClockConfigRegister); - else - ni_660x_write_register(dev, chipset, 0, ClockConfigRegister); + if (chip) + bits = CounterSwap; + + ni_660x_write_register(dev, chip, bits, NI660X_CLK_CFG); } static void ni_660x_handle_gpct_interrupt(struct comedi_device *dev, struct comedi_subdevice *s) { - ni_tio_handle_interrupt(subdev_to_counter(s), s); + struct ni_gpct *counter = s->private; + + ni_tio_handle_interrupt(counter, s); if (s->async->events) { if (s->async->events & (COMEDI_CB_EOA | COMEDI_CB_ERROR | COMEDI_CB_OVERFLOW)) { @@ -901,11 +823,12 @@ static int ni_660x_input_poll(struct comedi_device *dev, struct comedi_subdevice *s) { struct ni_660x_private *devpriv = dev->private; + struct ni_gpct *counter = s->private; unsigned long flags; /* lock to avoid race with comedi_poll */ spin_lock_irqsave(&devpriv->interrupt_lock, flags); - mite_sync_input_dma(subdev_to_counter(s)->mite_chan, s->async); + mite_sync_input_dma(counter->mite_chan, s->async); spin_unlock_irqrestore(&devpriv->interrupt_lock, flags); return comedi_buf_read_n_available(s->async); } @@ -915,10 +838,10 @@ static int ni_660x_buf_change(struct comedi_device *dev, unsigned long new_size) { struct ni_660x_private *devpriv = dev->private; + struct ni_gpct *counter = s->private; int ret; - ret = mite_buf_change(mite_ring(devpriv, subdev_to_counter(s)), - s->async); + ret = mite_buf_change(mite_ring(devpriv, counter), s->async); if (ret < 0) return ret; @@ -974,13 +897,6 @@ static void ni_660x_free_mite_rings(struct comedi_device *dev) } } -static int -ni_660x_GPCT_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) -{ - return ni_tio_rinsn(subdev_to_counter(s), insn, data); -} - static void init_tio_chip(struct comedi_device *dev, int chipset) { struct ni_660x_private *devpriv = dev->private; @@ -994,25 +910,11 @@ static void init_tio_chip(struct comedi_device *dev, int chipset) } ni_660x_write_register(dev, chipset, devpriv->dma_configuration_soft_copies[chipset], - DMAConfigRegister); + NI660X_DMA_CFG); for (i = 0; i < NUM_PFI_CHANNELS; ++i) ni_660x_write_register(dev, chipset, 0, IOConfigReg(i)); } -static int -ni_660x_GPCT_insn_config(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) -{ - return ni_tio_insn_config(subdev_to_counter(s), insn, data); -} - -static int ni_660x_GPCT_winsn(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) -{ - return ni_tio_winsn(subdev_to_counter(s), insn, data); -} - static int ni_660x_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) @@ -1024,13 +926,13 @@ static int ni_660x_dio_insn_bits(struct comedi_device *dev, s->state &= ~(data[0] << base_bitfield_channel); s->state |= (data[0] & data[1]) << base_bitfield_channel; /* Write out the new digital output lines */ - ni_660x_write_register(dev, 0, s->state, DIO32Output); + ni_660x_write_register(dev, 0, s->state, NI660X_DIO32_OUTPUT); } /* on return, data[1] contains the value of the digital * input and output lines. */ - data[1] = - (ni_660x_read_register(dev, 0, - DIO32Input) >> base_bitfield_channel); + data[1] = (ni_660x_read_register(dev, 0, NI660X_DIO32_INPUT) >> + base_bitfield_channel); + return insn->n; } @@ -1215,7 +1117,7 @@ static int ni_660x_auto_attach(struct comedi_device *dev, s->insn_config = ni_660x_dio_insn_config; /* we use the ioconfig registers to control dio direction, so zero output enables in stc dio control reg */ - ni_660x_write_register(dev, 0, 0, STCDIOControl); + ni_660x_write_register(dev, 0, 0, NI660X_STC_DIO_CONTROL); devpriv->counter_dev = ni_gpct_device_construct(dev, &ni_gpct_write_register, @@ -1234,12 +1136,12 @@ static int ni_660x_auto_attach(struct comedi_device *dev, SDF_CMD_READ /* | SDF_CMD_WRITE */ ; s->n_chan = 3; s->maxdata = 0xffffffff; - s->insn_read = ni_660x_GPCT_rinsn; - s->insn_write = ni_660x_GPCT_winsn; - s->insn_config = ni_660x_GPCT_insn_config; + s->insn_read = ni_tio_insn_read; + s->insn_write = ni_tio_insn_write; + s->insn_config = ni_tio_insn_config; s->do_cmd = &ni_660x_cmd; s->len_chanlist = 1; - s->do_cmdtest = &ni_660x_cmdtest; + s->do_cmdtest = ni_tio_cmdtest; s->cancel = &ni_660x_cancel; s->poll = &ni_660x_input_poll; s->async_dma_dir = DMA_BIDIRECTIONAL; @@ -1284,7 +1186,7 @@ static int ni_660x_auto_attach(struct comedi_device *dev, if (board->n_chips > 1) global_interrupt_config_bits |= Cascade_Int_Enable_Bit; ni_660x_write_register(dev, 0, global_interrupt_config_bits, - GlobalInterruptConfigRegister); + NI660X_GLOBAL_INT_CFG); dev_info(dev->class_dev, "ni_660x: %s attached\n", dev->board_name); return 0; } @@ -1320,7 +1222,7 @@ static int ni_660x_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &ni_660x_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(ni_660x_pci_table) = { +static const struct pci_device_id ni_660x_pci_table[] = { { PCI_VDEVICE(NI, 0x1310), BOARD_PCI6602 }, { PCI_VDEVICE(NI, 0x1360), BOARD_PXI6602 }, { PCI_VDEVICE(NI, 0x2c60), BOARD_PCI6601 }, diff --git a/drivers/staging/comedi/drivers/ni_670x.c b/drivers/staging/comedi/drivers/ni_670x.c index e4414cf110e7..8550fdc4ccd3 100644 --- a/drivers/staging/comedi/drivers/ni_670x.c +++ b/drivers/staging/comedi/drivers/ni_670x.c @@ -282,7 +282,7 @@ static int ni_670x_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &ni_670x_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(ni_670x_pci_table) = { +static const struct pci_device_id ni_670x_pci_table[] = { { PCI_VDEVICE(NI, 0x1290), BOARD_PCI6704 }, { PCI_VDEVICE(NI, 0x1920), BOARD_PXI6704 }, { PCI_VDEVICE(NI, 0x2c90), BOARD_PCI6703 }, diff --git a/drivers/staging/comedi/drivers/ni_at_a2150.c b/drivers/staging/comedi/drivers/ni_at_a2150.c index 63c847932eb8..f83eb9ebe278 100644 --- a/drivers/staging/comedi/drivers/ni_at_a2150.c +++ b/drivers/staging/comedi/drivers/ni_at_a2150.c @@ -74,9 +74,6 @@ TRIG_WAKE_EOS #define A2150_SIZE 28 #define A2150_DMA_BUFFER_SIZE 0xff00 /* size in bytes of dma buffer */ -/* #define A2150_DEBUG enable debugging code */ -#undef A2150_DEBUG /* disable debugging code */ - /* Registers and bits */ #define CONFIG_REG 0x0 #define CHANNEL_BITS(x) ((x) & 0x7) @@ -127,10 +124,9 @@ struct a2150_board { /* analog input range */ static const struct comedi_lrange range_a2150 = { - 1, - { - RANGE(-2.828, 2.828), - } + 1, { + BIP_RANGE(2.828) + } }; /* enum must match board indices */ @@ -167,19 +163,6 @@ static int a2150_get_timing(struct comedi_device *dev, unsigned int *period, static int a2150_set_chanlist(struct comedi_device *dev, unsigned int start_channel, unsigned int num_channels); -#ifdef A2150_DEBUG - -static void ni_dump_regs(struct comedi_device *dev) -{ - struct a2150_private *devpriv = dev->private; - - printk("config bits 0x%x\n", devpriv->config_bits); - printk("irq dma bits 0x%x\n", devpriv->irq_dma_bits); - printk("status bits 0x%x\n", inw(dev->iobase + STATUS_REG)); -} - -#endif - /* interrupt service routine */ static irqreturn_t a2150_interrupt(int irq, void *d) { @@ -411,11 +394,6 @@ static int a2150_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) unsigned int old_config_bits = devpriv->config_bits; unsigned int trigger_bits; - if (!dev->irq || !devpriv->dma) { - comedi_error(dev, - " irq and dma required, cannot do hardware conversions"); - return -1; - } if (cmd->flags & TRIG_RT) { comedi_error(dev, " dma incompatible with hard real-time interrupt (TRIG_RT), aborting"); @@ -506,9 +484,6 @@ static int a2150_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) /* start acquisition for soft trigger */ if (cmd->start_src == TRIG_NOW) outw(0, dev->iobase + FIFO_START_REG); -#ifdef A2150_DEBUG - ni_dump_regs(dev); -#endif return 0; } @@ -573,13 +548,7 @@ static int a2150_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, comedi_error(dev, "timeout"); return -ETIME; } -#ifdef A2150_DEBUG - ni_dump_regs(dev); -#endif data[n] = inw(dev->iobase + FIFO_DATA_REG); -#ifdef A2150_DEBUG - printk(" data is %i\n", data[n]); -#endif data[n] ^= 0x8000; } @@ -728,46 +697,35 @@ static int a2150_attach(struct comedi_device *dev, struct comedi_devconfig *it) if (ret) return ret; - /* grab our IRQ */ - if (irq) { - /* check that irq is supported */ - if (irq < 3 || irq == 8 || irq == 13 || irq > 15) { - printk(" invalid irq line %u\n", irq); - return -EINVAL; - } - if (request_irq(irq, a2150_interrupt, 0, - dev->driver->driver_name, dev)) { - printk("unable to allocate irq %u\n", irq); - return -EINVAL; + dev->board_ptr = a2150_boards + a2150_probe(dev); + thisboard = comedi_board(dev); + dev->board_name = thisboard->name; + + if ((irq >= 3 && irq <= 7) || (irq >= 9 && irq <= 12) || + irq == 14 || irq == 15) { + ret = request_irq(irq, a2150_interrupt, 0, + dev->board_name, dev); + if (ret == 0) { + devpriv->irq_dma_bits |= IRQ_LVL_BITS(irq); + dev->irq = irq; } - devpriv->irq_dma_bits |= IRQ_LVL_BITS(irq); - dev->irq = irq; } - /* initialize dma */ - if (dma) { - if (dma == 4 || dma > 7) { - printk(" invalid dma channel %u\n", dma); - return -EINVAL; - } - if (request_dma(dma, dev->driver->driver_name)) { - printk(" failed to allocate dma channel %u\n", dma); - return -EINVAL; - } - devpriv->dma = dma; - devpriv->dma_buffer = - kmalloc(A2150_DMA_BUFFER_SIZE, GFP_KERNEL | GFP_DMA); - if (devpriv->dma_buffer == NULL) - return -ENOMEM; - disable_dma(dma); - set_dma_mode(dma, DMA_MODE_READ); + if (dev->irq && dma <= 7 && dma != 4) { + ret = request_dma(dma, dev->board_name); + if (ret == 0) { + devpriv->dma = dma; + devpriv->dma_buffer = kmalloc(A2150_DMA_BUFFER_SIZE, + GFP_KERNEL | GFP_DMA); + if (!devpriv->dma_buffer) + return -ENOMEM; - devpriv->irq_dma_bits |= DMA_CHAN_BITS(dma); - } + disable_dma(dma); + set_dma_mode(dma, DMA_MODE_READ); - dev->board_ptr = a2150_boards + a2150_probe(dev); - thisboard = comedi_board(dev); - dev->board_name = thisboard->name; + devpriv->irq_dma_bits |= DMA_CHAN_BITS(dma); + } + } ret = comedi_alloc_subdevices(dev, 1); if (ret) @@ -775,17 +733,20 @@ static int a2150_attach(struct comedi_device *dev, struct comedi_devconfig *it) /* analog input subdevice */ s = &dev->subdevices[0]; - dev->read_subdev = s; s->type = COMEDI_SUBD_AI; - s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_OTHER | SDF_CMD_READ; + s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_OTHER; s->n_chan = 4; - s->len_chanlist = 4; s->maxdata = 0xffff; s->range_table = &range_a2150; - s->do_cmd = a2150_ai_cmd; - s->do_cmdtest = a2150_ai_cmdtest; s->insn_read = a2150_ai_rinsn; - s->cancel = a2150_cancel; + if (dev->irq && devpriv->dma) { + dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; + s->len_chanlist = s->n_chan; + s->do_cmd = a2150_ai_cmd; + s->do_cmdtest = a2150_ai_cmdtest; + s->cancel = a2150_cancel; + } /* need to do this for software counting of completed conversions, to * prevent hardware count from stopping acquisition */ diff --git a/drivers/staging/comedi/drivers/ni_atmio.c b/drivers/staging/comedi/drivers/ni_atmio.c index 856c73d8b7cd..d03935257b97 100644 --- a/drivers/staging/comedi/drivers/ni_atmio.c +++ b/drivers/staging/comedi/drivers/ni_atmio.c @@ -98,8 +98,6 @@ are not supported. #include "ni_stc.h" #include "8255.h" -#undef DEBUG - #define ATMIO 1 #undef PCIMIO @@ -437,19 +435,6 @@ static int ni_atmio_attach(struct comedi_device *dev, if (ret) return ret; -#ifdef DEBUG - /* board existence sanity check */ - { - int i; - - printk(" board fingerprint:"); - for (i = 0; i < 16; i += 2) { - printk(" %04x %02x", inw(dev->iobase + i), - inb(dev->iobase + i + 1)); - } - } -#endif - /* get board type */ board = ni_getboardtype(dev); diff --git a/drivers/staging/comedi/drivers/ni_atmio16d.c b/drivers/staging/comedi/drivers/ni_atmio16d.c index a9f7d40d6db2..e8cd5ddb85c5 100644 --- a/drivers/staging/comedi/drivers/ni_atmio16d.c +++ b/drivers/staging/comedi/drivers/ni_atmio16d.c @@ -105,40 +105,31 @@ struct atmio16_board_t { }; /* range structs */ -static const struct comedi_lrange range_atmio16d_ai_10_bipolar = { 4, { - BIP_RANGE - (10), - BIP_RANGE - (1), - BIP_RANGE - (0.1), - BIP_RANGE - (0.02) - } +static const struct comedi_lrange range_atmio16d_ai_10_bipolar = { + 4, { + BIP_RANGE(10), + BIP_RANGE(1), + BIP_RANGE(0.1), + BIP_RANGE(0.02) + } }; -static const struct comedi_lrange range_atmio16d_ai_5_bipolar = { 4, { - BIP_RANGE - (5), - BIP_RANGE - (0.5), - BIP_RANGE - (0.05), - BIP_RANGE - (0.01) - } +static const struct comedi_lrange range_atmio16d_ai_5_bipolar = { + 4, { + BIP_RANGE(5), + BIP_RANGE(0.5), + BIP_RANGE(0.05), + BIP_RANGE(0.01) + } }; -static const struct comedi_lrange range_atmio16d_ai_unipolar = { 4, { - UNI_RANGE - (10), - UNI_RANGE - (1), - UNI_RANGE - (0.1), - UNI_RANGE - (0.02) - } +static const struct comedi_lrange range_atmio16d_ai_unipolar = { + 4, { + UNI_RANGE(10), + UNI_RANGE(1), + UNI_RANGE(0.1), + UNI_RANGE(0.02) + } }; /* private data struct */ @@ -229,7 +220,7 @@ static void reset_atmio16d(struct comedi_device *dev) static irqreturn_t atmio16d_interrupt(int irq, void *d) { struct comedi_device *dev = d; - struct comedi_subdevice *s = &dev->subdevices[0]; + struct comedi_subdevice *s = dev->read_subdev; comedi_buf_put(s->async, inw(dev->iobase + AD_FIFO_REG)); @@ -495,18 +486,13 @@ static int atmio16d_ai_insn_read(struct comedi_device *dev, break; } if (status & STAT_AD_OVERFLOW) { - printk(KERN_INFO "atmio16d: a/d FIFO overflow\n"); outw(0, dev->iobase + AD_CLEAR_REG); - return -ETIME; } } /* end waiting, now check if it timed out */ - if (t == ATMIO16D_TIMEOUT) { - printk(KERN_INFO "atmio16d: timeout\n"); - + if (t == ATMIO16D_TIMEOUT) return -ETIME; - } } return i; @@ -636,7 +622,6 @@ static int atmio16d_attach(struct comedi_device *dev, const struct atmio16_board_t *board = comedi_board(dev); struct atmio16d_private *devpriv; struct comedi_subdevice *s; - unsigned int irq; int ret; ret = comedi_request_region(dev, it->options[0], ATMIO16D_SIZE); @@ -654,19 +639,11 @@ static int atmio16d_attach(struct comedi_device *dev, /* reset the atmio16d hardware */ reset_atmio16d(dev); - /* check if our interrupt is available and get it */ - irq = it->options[1]; - if (irq) { - - ret = request_irq(irq, atmio16d_interrupt, 0, "atmio16d", dev); - if (ret < 0) { - printk(KERN_INFO "failed to allocate irq %u\n", irq); - return ret; - } - dev->irq = irq; - printk(KERN_INFO "( irq = %u )\n", irq); - } else { - printk(KERN_INFO "( no irq )"); + if (it->options[1]) { + ret = request_irq(it->options[1], atmio16d_interrupt, 0, + dev->board_name, dev); + if (ret == 0) + dev->irq = it->options[1]; } /* set device options */ @@ -682,16 +659,11 @@ static int atmio16d_attach(struct comedi_device *dev, /* setup sub-devices */ s = &dev->subdevices[0]; - dev->read_subdev = s; /* ai subdevice */ s->type = COMEDI_SUBD_AI; - s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_CMD_READ; + s->subdev_flags = SDF_READABLE | SDF_GROUND; s->n_chan = (devpriv->adc_mux ? 16 : 8); - s->len_chanlist = 16; s->insn_read = atmio16d_ai_insn_read; - s->do_cmdtest = atmio16d_ai_cmdtest; - s->do_cmd = atmio16d_ai_cmd; - s->cancel = atmio16d_ai_cancel; s->maxdata = 0xfff; /* 4095 decimal */ switch (devpriv->adc_range) { case adc_bipolar10: @@ -704,6 +676,14 @@ static int atmio16d_attach(struct comedi_device *dev, s->range_table = &range_atmio16d_ai_unipolar; break; } + if (dev->irq) { + dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; + s->len_chanlist = 16; + s->do_cmdtest = atmio16d_ai_cmdtest; + s->do_cmd = atmio16d_ai_cmd; + s->cancel = atmio16d_ai_cancel; + } /* ao subdevice */ s = &dev->subdevices[1]; @@ -756,7 +736,6 @@ static int atmio16d_attach(struct comedi_device *dev, s->n_chan = 0; s->maxdata = 0 #endif - printk("\n"); return 0; } diff --git a/drivers/staging/comedi/drivers/ni_labpc_pci.c b/drivers/staging/comedi/drivers/ni_labpc_pci.c index 8be681fca907..739597068297 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_pci.c +++ b/drivers/staging/comedi/drivers/ni_labpc_pci.c @@ -107,7 +107,7 @@ static struct comedi_driver labpc_pci_comedi_driver = { .detach = labpc_pci_detach, }; -static DEFINE_PCI_DEVICE_TABLE(labpc_pci_table) = { +static const struct pci_device_id labpc_pci_table[] = { { PCI_VDEVICE(NI, 0x161), BOARD_NI_PCI1200 }, { 0 } }; diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c index 5113397bfecf..457b88481db0 100644 --- a/drivers/staging/comedi/drivers/ni_mio_common.c +++ b/drivers/staging/comedi/drivers/ni_mio_common.c @@ -52,10 +52,6 @@ fully tested as yet. Terry Barnaby, BEAM Ltd. */ -/* #define DEBUG_INTERRUPT */ -/* #define DEBUG_STATUS_A */ -/* #define DEBUG_STATUS_B */ - #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/delay.h> @@ -63,10 +59,6 @@ #include "mite.h" #include "comedi_fc.h" -#ifndef MDPRINTK -#define MDPRINTK(format, args...) -#endif - /* A timeout count */ #define NI_TIMEOUT 1000 static const unsigned old_RTSI_clock_channel = 7; @@ -86,111 +78,109 @@ static const short ni_gainlkup[][16] = { [ai_gain_6143] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, }; -static const struct comedi_lrange range_ni_E_ai = { 16, { - RANGE(-10, 10), - RANGE(-5, 5), - RANGE(-2.5, 2.5), - RANGE(-1, 1), - RANGE(-0.5, 0.5), - RANGE(-0.25, 0.25), - RANGE(-0.1, 0.1), - RANGE(-0.05, 0.05), - RANGE(0, 20), - RANGE(0, 10), - RANGE(0, 5), - RANGE(0, 2), - RANGE(0, 1), - RANGE(0, 0.5), - RANGE(0, 0.2), - RANGE(0, 0.1), - } +static const struct comedi_lrange range_ni_E_ai = { + 16, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1), + BIP_RANGE(0.5), + BIP_RANGE(0.25), + BIP_RANGE(0.1), + BIP_RANGE(0.05), + UNI_RANGE(20), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2), + UNI_RANGE(1), + UNI_RANGE(0.5), + UNI_RANGE(0.2), + UNI_RANGE(0.1) + } }; -static const struct comedi_lrange range_ni_E_ai_limited = { 8, { - RANGE(-10, 10), - RANGE(-5, 5), - RANGE(-1, 1), - RANGE(-0.1, - 0.1), - RANGE(0, 10), - RANGE(0, 5), - RANGE(0, 1), - RANGE(0, 0.1), - } +static const struct comedi_lrange range_ni_E_ai_limited = { + 8, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(1), + BIP_RANGE(0.1), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(1), + UNI_RANGE(0.1) + } }; -static const struct comedi_lrange range_ni_E_ai_limited14 = { 14, { - RANGE(-10, - 10), - RANGE(-5, 5), - RANGE(-2, 2), - RANGE(-1, 1), - RANGE(-0.5, - 0.5), - RANGE(-0.2, - 0.2), - RANGE(-0.1, - 0.1), - RANGE(0, 10), - RANGE(0, 5), - RANGE(0, 2), - RANGE(0, 1), - RANGE(0, - 0.5), - RANGE(0, - 0.2), - RANGE(0, - 0.1), - } +static const struct comedi_lrange range_ni_E_ai_limited14 = { + 14, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2), + BIP_RANGE(1), + BIP_RANGE(0.5), + BIP_RANGE(0.2), + BIP_RANGE(0.1), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2), + UNI_RANGE(1), + UNI_RANGE(0.5), + UNI_RANGE(0.2), + UNI_RANGE(0.1) + } }; -static const struct comedi_lrange range_ni_E_ai_bipolar4 = { 4, { - RANGE(-10, 10), - RANGE(-5, 5), - RANGE(-0.5, - 0.5), - RANGE(-0.05, - 0.05), - } +static const struct comedi_lrange range_ni_E_ai_bipolar4 = { + 4, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(0.5), + BIP_RANGE(0.05) + } }; -static const struct comedi_lrange range_ni_E_ai_611x = { 8, { - RANGE(-50, 50), - RANGE(-20, 20), - RANGE(-10, 10), - RANGE(-5, 5), - RANGE(-2, 2), - RANGE(-1, 1), - RANGE(-0.5, 0.5), - RANGE(-0.2, 0.2), - } +static const struct comedi_lrange range_ni_E_ai_611x = { + 8, { + BIP_RANGE(50), + BIP_RANGE(20), + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2), + BIP_RANGE(1), + BIP_RANGE(0.5), + BIP_RANGE(0.2) + } }; -static const struct comedi_lrange range_ni_M_ai_622x = { 4, { - RANGE(-10, 10), - RANGE(-5, 5), - RANGE(-1, 1), - RANGE(-0.2, 0.2), - } +static const struct comedi_lrange range_ni_M_ai_622x = { + 4, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(1), + BIP_RANGE(0.2) + } }; -static const struct comedi_lrange range_ni_M_ai_628x = { 7, { - RANGE(-10, 10), - RANGE(-5, 5), - RANGE(-2, 2), - RANGE(-1, 1), - RANGE(-0.5, 0.5), - RANGE(-0.2, 0.2), - RANGE(-0.1, 0.1), - } +static const struct comedi_lrange range_ni_M_ai_628x = { + 7, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2), + BIP_RANGE(1), + BIP_RANGE(0.5), + BIP_RANGE(0.2), + BIP_RANGE(0.1) + } }; -static const struct comedi_lrange range_ni_E_ao_ext = { 4, { - RANGE(-10, 10), - RANGE(0, 10), - RANGE_ext(-1, 1), - RANGE_ext(0, 1), - } +static const struct comedi_lrange range_ni_E_ao_ext = { + 4, { + BIP_RANGE(10), + UNI_RANGE(10), + RANGE_ext(-1, 1), + RANGE_ext(0, 1) + } }; static const struct comedi_lrange *const ni_range_lkup[] = { @@ -266,17 +256,6 @@ static int ni_rtsi_insn_config(struct comedi_device *dev, static void caldac_setup(struct comedi_device *dev, struct comedi_subdevice *s); static int ni_read_eeprom(struct comedi_device *dev, int addr); -#ifdef DEBUG_STATUS_A -static void ni_mio_print_status_a(int status); -#else -#define ni_mio_print_status_a(a) -#endif -#ifdef DEBUG_STATUS_B -static void ni_mio_print_status_b(int status); -#else -#define ni_mio_print_status_b(a) -#endif - static int ni_ai_reset(struct comedi_device *dev, struct comedi_subdevice *s); #ifndef PCIDMA static void ni_handle_fifo_half_full(struct comedi_device *dev); @@ -297,19 +276,8 @@ static int ni_ao_reset(struct comedi_device *dev, struct comedi_subdevice *s); static int ni_8255_callback(int dir, int port, int data, unsigned long arg); -static int ni_gpct_insn_write(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int ni_gpct_insn_read(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int ni_gpct_insn_config(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); #ifdef PCIDMA static int ni_gpct_cmd(struct comedi_device *dev, struct comedi_subdevice *s); -static int ni_gpct_cmdtest(struct comedi_device *dev, - struct comedi_subdevice *s, struct comedi_cmd *cmd); #endif static int ni_gpct_cancel(struct comedi_device *dev, struct comedi_subdevice *s); @@ -322,10 +290,6 @@ static int cs5529_do_conversion(struct comedi_device *dev, static int cs5529_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data); -#ifdef NI_CS5529_DEBUG -static unsigned int cs5529_config_read(struct comedi_device *dev, - unsigned int reg_select_bits); -#endif static void cs5529_config_write(struct comedi_device *dev, unsigned int value, unsigned int reg_select_bits); @@ -487,11 +451,10 @@ static inline void ni_set_gpct_dma_channel(struct comedi_device *dev, { unsigned bitfield; - if (mite_channel >= 0) { + if (mite_channel >= 0) bitfield = GPCT_DMA_Select_Bits(gpct_index, mite_channel); - } else { + else bitfield = 0; - } ni_set_bitfield(dev, G0_G1_Select, GPCT_DMA_Select_Mask(gpct_index), bitfield); } @@ -907,9 +870,8 @@ static void mite_handle_b_linkc(struct mite_struct *mite, unsigned long flags; spin_lock_irqsave(&devpriv->mite_channel_lock, flags); - if (devpriv->ao_mite_chan) { + if (devpriv->ao_mite_chan) mite_sync_output_dma(devpriv->ao_mite_chan, s->async); - } spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); } @@ -957,9 +919,8 @@ static void ni_handle_eos(struct comedi_device *dev, struct comedi_subdevice *s) #endif } /* handle special case of single scan using AI_End_On_End_Of_Scan */ - if ((devpriv->ai_cmd2 & AI_End_On_End_Of_Scan)) { + if ((devpriv->ai_cmd2 & AI_End_On_End_Of_Scan)) shutdown_ai_command(dev); - } } static void shutdown_ai_command(struct comedi_device *dev) @@ -1023,19 +984,15 @@ static void ack_a_interrupt(struct comedi_device *dev, unsigned short a_status) struct ni_private *devpriv = dev->private; unsigned short ack = 0; - if (a_status & AI_SC_TC_St) { + if (a_status & AI_SC_TC_St) ack |= AI_SC_TC_Interrupt_Ack; - } - if (a_status & AI_START1_St) { + if (a_status & AI_START1_St) ack |= AI_START1_Interrupt_Ack; - } - if (a_status & AI_START_St) { + if (a_status & AI_START_St) ack |= AI_START_Interrupt_Ack; - } - if (a_status & AI_STOP_St) { + if (a_status & AI_STOP_St) /* not sure why we used to ack the START here also, instead of doing it independently. Frank Hess 2007-07-06 */ - ack |= AI_STOP_Interrupt_Ack /*| AI_START_Interrupt_Ack */ ; - } + ack |= AI_STOP_Interrupt_Ack /*| AI_START_Interrupt_Ack */; if (ack) devpriv->stc_writew(dev, ack, Interrupt_A_Ack_Register); } @@ -1050,16 +1007,9 @@ static void handle_a_interrupt(struct comedi_device *dev, unsigned short status, if (s->type == COMEDI_SUBD_UNUSED) return; -#ifdef DEBUG_INTERRUPT - printk - ("ni_mio_common: interrupt: a_status=%04x ai_mite_status=%08x\n", - status, ai_mite_status); - ni_mio_print_status_a(status); -#endif #ifdef PCIDMA - if (ai_mite_status & CHSR_LINKC) { + if (ai_mite_status & CHSR_LINKC) ni_sync_ai_dma(dev); - } if (ai_mite_status & ~(CHSR_INT | CHSR_LINKC | CHSR_DONE | CHSR_MRDY | CHSR_DRDY | CHSR_DRQ1 | CHSR_DRQ0 | CHSR_ERROR | @@ -1067,7 +1017,6 @@ static void handle_a_interrupt(struct comedi_device *dev, unsigned short status, printk ("unknown mite interrupt, ack! (ai_mite_status=%08x)\n", ai_mite_status); - /* mite_print_chsr(ai_mite_status); */ s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA; /* disable_irq(dev->irq); */ } @@ -1092,7 +1041,6 @@ static void handle_a_interrupt(struct comedi_device *dev, unsigned short status, AI_SC_TC_Error_St)) { printk("ni_mio_common: ai error a_status=%04x\n", status); - ni_mio_print_status_a(status); shutdown_ai_command(dev); @@ -1105,12 +1053,8 @@ static void handle_a_interrupt(struct comedi_device *dev, unsigned short status, return; } if (status & AI_SC_TC_St) { -#ifdef DEBUG_INTERRUPT - printk("ni_mio_common: SC_TC interrupt\n"); -#endif - if (!devpriv->ai_continuous) { + if (!devpriv->ai_continuous) shutdown_ai_command(dev); - } } } #ifndef PCIDMA @@ -1129,20 +1073,10 @@ static void handle_a_interrupt(struct comedi_device *dev, unsigned short status, } #endif /* !PCIDMA */ - if ((status & AI_STOP_St)) { + if ((status & AI_STOP_St)) ni_handle_eos(dev, s); - } ni_event(dev, s); - -#ifdef DEBUG_INTERRUPT - status = devpriv->stc_readw(dev, AI_Status_1_Register); - if (status & Interrupt_A_St) { - printk - ("handle_a_interrupt: didn't clear interrupt? status=0x%x\n", - status); - } -#endif } static void ack_b_interrupt(struct comedi_device *dev, unsigned short b_status) @@ -1150,27 +1084,20 @@ static void ack_b_interrupt(struct comedi_device *dev, unsigned short b_status) struct ni_private *devpriv = dev->private; unsigned short ack = 0; - if (b_status & AO_BC_TC_St) { + if (b_status & AO_BC_TC_St) ack |= AO_BC_TC_Interrupt_Ack; - } - if (b_status & AO_Overrun_St) { + if (b_status & AO_Overrun_St) ack |= AO_Error_Interrupt_Ack; - } - if (b_status & AO_START_St) { + if (b_status & AO_START_St) ack |= AO_START_Interrupt_Ack; - } - if (b_status & AO_START1_St) { + if (b_status & AO_START1_St) ack |= AO_START1_Interrupt_Ack; - } - if (b_status & AO_UC_TC_St) { + if (b_status & AO_UC_TC_St) ack |= AO_UC_TC_Interrupt_Ack; - } - if (b_status & AO_UI2_TC_St) { + if (b_status & AO_UI2_TC_St) ack |= AO_UI2_TC_Interrupt_Ack; - } - if (b_status & AO_UPDATE_St) { + if (b_status & AO_UPDATE_St) ack |= AO_UPDATE_Interrupt_Ack; - } if (ack) devpriv->stc_writew(dev, ack, Interrupt_B_Ack_Register); } @@ -1182,17 +1109,10 @@ static void handle_b_interrupt(struct comedi_device *dev, struct comedi_subdevice *s = &dev->subdevices[NI_AO_SUBDEV]; /* unsigned short ack=0; */ -#ifdef DEBUG_INTERRUPT - printk("ni_mio_common: interrupt: b_status=%04x m1_status=%08x\n", - b_status, ao_mite_status); - ni_mio_print_status_b(b_status); -#endif - #ifdef PCIDMA /* Currently, mite.c requires us to handle LINKC */ - if (ao_mite_status & CHSR_LINKC) { + if (ao_mite_status & CHSR_LINKC) mite_handle_b_linkc(devpriv->mite, dev); - } if (ao_mite_status & ~(CHSR_INT | CHSR_LINKC | CHSR_DONE | CHSR_MRDY | CHSR_DRDY | CHSR_DRQ1 | CHSR_DRQ0 | CHSR_ERROR | @@ -1200,7 +1120,6 @@ static void handle_b_interrupt(struct comedi_device *dev, printk ("unknown mite interrupt, ack! (ao_mite_status=%08x)\n", ao_mite_status); - /* mite_print_chsr(ao_mite_status); */ s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; } #endif @@ -1214,12 +1133,9 @@ static void handle_b_interrupt(struct comedi_device *dev, s->async->events |= COMEDI_CB_OVERFLOW; } - if (b_status & AO_BC_TC_St) { - MDPRINTK - ("ni_mio_common: AO BC_TC status=0x%04x status2=0x%04x\n", - b_status, devpriv->stc_readw(dev, AO_Status_2_Register)); + if (b_status & AO_BC_TC_St) s->async->events |= COMEDI_CB_EOA; - } + #ifndef PCIDMA if (b_status & AO_FIFO_Request_St) { int ret; @@ -1238,50 +1154,6 @@ static void handle_b_interrupt(struct comedi_device *dev, ni_event(dev, s); } -#ifdef DEBUG_STATUS_A -static const char *const status_a_strings[] = { - "passthru0", "fifo", "G0_gate", "G0_TC", - "stop", "start", "sc_tc", "start1", - "start2", "sc_tc_error", "overflow", "overrun", - "fifo_empty", "fifo_half_full", "fifo_full", "interrupt_a" -}; - -static void ni_mio_print_status_a(int status) -{ - int i; - - printk("A status:"); - for (i = 15; i >= 0; i--) { - if (status & (1 << i)) { - printk(" %s", status_a_strings[i]); - } - } - printk("\n"); -} -#endif - -#ifdef DEBUG_STATUS_B -static const char *const status_b_strings[] = { - "passthru1", "fifo", "G1_gate", "G1_TC", - "UI2_TC", "UPDATE", "UC_TC", "BC_TC", - "start1", "overrun", "start", "bc_tc_error", - "fifo_empty", "fifo_half_full", "fifo_full", "interrupt_b" -}; - -static void ni_mio_print_status_b(int status) -{ - int i; - - printk("B status:"); - for (i = 15; i >= 0; i--) { - if (status & (1 << i)) { - printk(" %s", status_b_strings[i]); - } - } - printk("\n"); -} -#endif - #ifndef PCIDMA static void ni_ao_fifo_load(struct comedi_device *dev, @@ -1324,9 +1196,8 @@ static void ni_ao_fifo_load(struct comedi_device *dev, chan %= cmd->chanlist_len; } async->cur_chan = chan; - if (err == 0) { + if (err == 0) async->events |= COMEDI_CB_OVERFLOW; - } } /* @@ -2392,7 +2263,6 @@ static int ni_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) unsigned int stop_count; int interrupt_a_enable = 0; - MDPRINTK("ni_ai_cmd\n"); if (dev->irq == 0) { comedi_error(dev, "cannot run command without an irq"); return -EIO; @@ -2630,15 +2500,11 @@ static int ni_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) ni_set_bits(dev, Interrupt_A_Enable_Register, interrupt_a_enable, 1); - - MDPRINTK("Interrupt_A_Enable_Register = 0x%04x\n", - devpriv->int_a_enable_reg); } else { /* interrupt on nothing */ ni_set_bits(dev, Interrupt_A_Enable_Register, ~0, 0); /* XXX start polling if necessary */ - MDPRINTK("interrupting on nothing\n"); } /* end configuration */ @@ -2664,7 +2530,6 @@ static int ni_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) if (retval) return retval; } - /* mite_dump_regs(devpriv->mite); */ #endif switch (cmd->start_src) { @@ -2682,8 +2547,6 @@ static int ni_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) break; } - MDPRINTK("exit ni_ai_cmd\n"); - return 0; } @@ -3248,11 +3111,10 @@ static int ni_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s) devpriv->stc_writew(dev, devpriv->ao_mode1, AO_Mode_1_Register); devpriv->ao_mode2 &= ~AO_BC_Initial_Load_Source; devpriv->stc_writew(dev, devpriv->ao_mode2, AO_Mode_2_Register); - if (cmd->stop_src == TRIG_NONE) { + if (cmd->stop_src == TRIG_NONE) devpriv->stc_writel(dev, 0xffffff, AO_BC_Load_A_Register); - } else { + else devpriv->stc_writel(dev, 0, AO_BC_Load_A_Register); - } devpriv->stc_writew(dev, AO_BC_Load, AO_Command_1_Register); devpriv->ao_mode2 &= ~AO_UC_Initial_Load_Source; devpriv->stc_writew(dev, devpriv->ao_mode2, AO_Mode_2_Register); @@ -3513,9 +3375,8 @@ static int ni_ao_reset(struct comedi_device *dev, struct comedi_subdevice *s) if (board->reg_type & ni_reg_6xxx_mask) { unsigned immediate_bits = 0; unsigned i; - for (i = 0; i < s->n_chan; ++i) { + for (i = 0; i < s->n_chan; ++i) immediate_bits |= 1 << i; - } ao_win_out(immediate_bits, AO_Immediate_671x); ao_win_out(CLEAR_WG, AO_Misc_611x); } @@ -3689,9 +3550,8 @@ static int ni_cdio_cmd(struct comedi_device *dev, struct comedi_subdevice *s) return -EIO; } retval = ni_request_cdo_mite_channel(dev); - if (retval < 0) { + if (retval < 0) return retval; - } s->async->inttrig = &ni_cdo_inttrig; return 0; } @@ -3773,9 +3633,8 @@ static void handle_cdio_interrupt(struct comedi_device *dev) unsigned long flags; #endif - if ((board->reg_type & ni_reg_m_series_mask) == 0) { + if ((board->reg_type & ni_reg_m_series_mask) == 0) return; - } #ifdef PCIDMA spin_lock_irqsave(&devpriv->mite_channel_lock, flags); if (devpriv->cdo_mite_chan) { @@ -3793,15 +3652,15 @@ static void handle_cdio_interrupt(struct comedi_device *dev) cdio_status = ni_readl(M_Offset_CDIO_Status); if (cdio_status & (CDO_Overrun_Bit | CDO_Underflow_Bit)) { -/* printk("cdio error: statux=0x%x\n", cdio_status); */ + /* printk("cdio error: statux=0x%x\n", cdio_status); */ ni_writel(CDO_Error_Interrupt_Confirm_Bit, M_Offset_CDIO_Command); /* XXX just guessing this is needed and does something useful */ s->async->events |= COMEDI_CB_OVERFLOW; } if (cdio_status & CDO_FIFO_Empty_Bit) { -/* printk("cdio fifo empty\n"); */ + /* printk("cdio fifo empty\n"); */ ni_writel(CDO_Empty_FIFO_Interrupt_Enable_Clear_Bit, M_Offset_CDIO_Command); -/* s->async->events |= COMEDI_CB_EOA; */ + /* s->async->events |= COMEDI_CB_EOA; */ } ni_event(dev, s); } @@ -3819,10 +3678,6 @@ static int ni_serial_insn_config(struct comedi_device *dev, switch (data[0]) { case INSN_CONFIG_SERIAL_CLOCK: - -#ifdef DEBUG_DIO - printk("SPI serial clock Config cd\n", data[1]); -#endif devpriv->serial_hw_mode = 1; devpriv->dio_control |= DIO_HW_Serial_Enable; @@ -3874,9 +3729,8 @@ static int ni_serial_insn_config(struct comedi_device *dev, case INSN_CONFIG_BIDIRECTIONAL_DATA: - if (devpriv->serial_interval_ns == 0) { + if (devpriv->serial_interval_ns == 0) return -EINVAL; - } byte_out = data[1] & 0xFF; @@ -3911,10 +3765,6 @@ static int ni_serial_hw_readwrite8(struct comedi_device *dev, unsigned int status1; int err = 0, count = 20; -#ifdef DEBUG_DIO - printk("ni_serial_hw_readwrite8: outputting 0x%x\n", data_out); -#endif - devpriv->dio_output &= ~DIO_Serial_Data_Mask; devpriv->dio_output |= DIO_Serial_Data_Out(data_out); devpriv->stc_writew(dev, devpriv->dio_output, DIO_Output_Register); @@ -3948,12 +3798,8 @@ static int ni_serial_hw_readwrite8(struct comedi_device *dev, DIO_Serial_IO_In_Progress_St goes high one bit too early. */ udelay((devpriv->serial_interval_ns + 999) / 1000); - if (data_in != NULL) { + if (data_in != NULL) *data_in = devpriv->stc_readw(dev, DIO_Serial_Input_Register); -#ifdef DEBUG_DIO - printk("ni_serial_hw_readwrite8: inputted 0x%x\n", *data_in); -#endif - } Error: devpriv->stc_writew(dev, devpriv->dio_control, DIO_Control_Register); @@ -3969,10 +3815,6 @@ static int ni_serial_sw_readwrite8(struct comedi_device *dev, struct ni_private *devpriv = dev->private; unsigned char mask, input = 0; -#ifdef DEBUG_DIO - printk("ni_serial_sw_readwrite8: outputting 0x%x\n", data_out); -#endif - /* Wait for one bit before transfer */ udelay((devpriv->serial_interval_ns + 999) / 1000); @@ -3981,9 +3823,8 @@ static int ni_serial_sw_readwrite8(struct comedi_device *dev, because it is a per-subdevice field, and serial is a separate subdevice from DIO. */ devpriv->dio_output &= ~DIO_SDOUT; - if (data_out & mask) { + if (data_out & mask) devpriv->dio_output |= DIO_SDOUT; - } devpriv->stc_writew(dev, devpriv->dio_output, DIO_Output_Register); @@ -4003,15 +3844,12 @@ static int ni_serial_sw_readwrite8(struct comedi_device *dev, /* Input current bit */ if (devpriv->stc_readw(dev, - DIO_Parallel_Input_Register) & DIO_SDIN) - { -/* printk("DIO_P_I_R: 0x%x\n", devpriv->stc_readw(dev, DIO_Parallel_Input_Register)); */ + DIO_Parallel_Input_Register) & DIO_SDIN) { + /* printk("DIO_P_I_R: 0x%x\n", devpriv->stc_readw(dev, DIO_Parallel_Input_Register)); */ input |= mask; } } -#ifdef DEBUG_DIO - printk("ni_serial_sw_readwrite8: inputted 0x%x\n", input); -#endif + if (data_in) *data_in = input; @@ -4023,9 +3861,8 @@ static void mio_common_detach(struct comedi_device *dev) struct ni_private *devpriv = dev->private; if (devpriv) { - if (devpriv->counter_dev) { + if (devpriv->counter_dev) ni_gpct_device_destroy(devpriv->counter_dev); - } } } @@ -4044,82 +3881,82 @@ static unsigned ni_gpct_to_stc_register(enum ni_gpct_register reg) { unsigned stc_register; switch (reg) { - case NITIO_G0_Autoincrement_Reg: + case NITIO_G0_AUTO_INC: stc_register = G_Autoincrement_Register(0); break; - case NITIO_G1_Autoincrement_Reg: + case NITIO_G1_AUTO_INC: stc_register = G_Autoincrement_Register(1); break; - case NITIO_G0_Command_Reg: + case NITIO_G0_CMD: stc_register = G_Command_Register(0); break; - case NITIO_G1_Command_Reg: + case NITIO_G1_CMD: stc_register = G_Command_Register(1); break; - case NITIO_G0_HW_Save_Reg: + case NITIO_G0_HW_SAVE: stc_register = G_HW_Save_Register(0); break; - case NITIO_G1_HW_Save_Reg: + case NITIO_G1_HW_SAVE: stc_register = G_HW_Save_Register(1); break; - case NITIO_G0_SW_Save_Reg: + case NITIO_G0_SW_SAVE: stc_register = G_Save_Register(0); break; - case NITIO_G1_SW_Save_Reg: + case NITIO_G1_SW_SAVE: stc_register = G_Save_Register(1); break; - case NITIO_G0_Mode_Reg: + case NITIO_G0_MODE: stc_register = G_Mode_Register(0); break; - case NITIO_G1_Mode_Reg: + case NITIO_G1_MODE: stc_register = G_Mode_Register(1); break; - case NITIO_G0_LoadA_Reg: + case NITIO_G0_LOADA: stc_register = G_Load_A_Register(0); break; - case NITIO_G1_LoadA_Reg: + case NITIO_G1_LOADA: stc_register = G_Load_A_Register(1); break; - case NITIO_G0_LoadB_Reg: + case NITIO_G0_LOADB: stc_register = G_Load_B_Register(0); break; - case NITIO_G1_LoadB_Reg: + case NITIO_G1_LOADB: stc_register = G_Load_B_Register(1); break; - case NITIO_G0_Input_Select_Reg: + case NITIO_G0_INPUT_SEL: stc_register = G_Input_Select_Register(0); break; - case NITIO_G1_Input_Select_Reg: + case NITIO_G1_INPUT_SEL: stc_register = G_Input_Select_Register(1); break; - case NITIO_G01_Status_Reg: + case NITIO_G01_STATUS: stc_register = G_Status_Register; break; - case NITIO_G01_Joint_Reset_Reg: + case NITIO_G01_RESET: stc_register = Joint_Reset_Register; break; - case NITIO_G01_Joint_Status1_Reg: + case NITIO_G01_STATUS1: stc_register = Joint_Status_1_Register; break; - case NITIO_G01_Joint_Status2_Reg: + case NITIO_G01_STATUS2: stc_register = Joint_Status_2_Register; break; - case NITIO_G0_Interrupt_Acknowledge_Reg: + case NITIO_G0_INT_ACK: stc_register = Interrupt_A_Ack_Register; break; - case NITIO_G1_Interrupt_Acknowledge_Reg: + case NITIO_G1_INT_ACK: stc_register = Interrupt_B_Ack_Register; break; - case NITIO_G0_Status_Reg: + case NITIO_G0_STATUS: stc_register = AI_Status_1_Register; break; - case NITIO_G1_Status_Reg: + case NITIO_G1_STATUS: stc_register = AO_Status_1_Register; break; - case NITIO_G0_Interrupt_Enable_Reg: + case NITIO_G0_INT_ENA: stc_register = Interrupt_A_Enable_Register; break; - case NITIO_G1_Interrupt_Enable_Reg: + case NITIO_G1_INT_ENA: stc_register = Interrupt_B_Enable_Register; break; default: @@ -4147,52 +3984,52 @@ static void ni_gpct_write_register(struct ni_gpct *counter, unsigned bits, switch (reg) { /* m-series-only registers */ - case NITIO_G0_Counting_Mode_Reg: + case NITIO_G0_CNT_MODE: ni_writew(bits, M_Offset_G0_Counting_Mode); break; - case NITIO_G1_Counting_Mode_Reg: + case NITIO_G1_CNT_MODE: ni_writew(bits, M_Offset_G1_Counting_Mode); break; - case NITIO_G0_Second_Gate_Reg: + case NITIO_G0_GATE2: ni_writew(bits, M_Offset_G0_Second_Gate); break; - case NITIO_G1_Second_Gate_Reg: + case NITIO_G1_GATE2: ni_writew(bits, M_Offset_G1_Second_Gate); break; - case NITIO_G0_DMA_Config_Reg: + case NITIO_G0_DMA_CFG: ni_writew(bits, M_Offset_G0_DMA_Config); break; - case NITIO_G1_DMA_Config_Reg: + case NITIO_G1_DMA_CFG: ni_writew(bits, M_Offset_G1_DMA_Config); break; - case NITIO_G0_ABZ_Reg: + case NITIO_G0_ABZ: ni_writew(bits, M_Offset_G0_MSeries_ABZ); break; - case NITIO_G1_ABZ_Reg: + case NITIO_G1_ABZ: ni_writew(bits, M_Offset_G1_MSeries_ABZ); break; /* 32 bit registers */ - case NITIO_G0_LoadA_Reg: - case NITIO_G1_LoadA_Reg: - case NITIO_G0_LoadB_Reg: - case NITIO_G1_LoadB_Reg: + case NITIO_G0_LOADA: + case NITIO_G1_LOADA: + case NITIO_G0_LOADB: + case NITIO_G1_LOADB: stc_register = ni_gpct_to_stc_register(reg); devpriv->stc_writel(dev, bits, stc_register); break; /* 16 bit registers */ - case NITIO_G0_Interrupt_Enable_Reg: + case NITIO_G0_INT_ENA: BUG_ON(bits & ~gpct_interrupt_a_enable_mask); ni_set_bitfield(dev, Interrupt_A_Enable_Register, gpct_interrupt_a_enable_mask, bits); break; - case NITIO_G1_Interrupt_Enable_Reg: + case NITIO_G1_INT_ENA: BUG_ON(bits & ~gpct_interrupt_b_enable_mask); ni_set_bitfield(dev, Interrupt_B_Enable_Register, gpct_interrupt_b_enable_mask, bits); break; - case NITIO_G01_Joint_Reset_Reg: + case NITIO_G01_RESET: BUG_ON(bits & ~gpct_joint_reset_mask); /* fall-through */ default: @@ -4210,21 +4047,18 @@ static unsigned ni_gpct_read_register(struct ni_gpct *counter, switch (reg) { /* m-series only registers */ - case NITIO_G0_DMA_Status_Reg: + case NITIO_G0_DMA_STATUS: return ni_readw(M_Offset_G0_DMA_Status); - break; - case NITIO_G1_DMA_Status_Reg: + case NITIO_G1_DMA_STATUS: return ni_readw(M_Offset_G1_DMA_Status); - break; /* 32 bit registers */ - case NITIO_G0_HW_Save_Reg: - case NITIO_G1_HW_Save_Reg: - case NITIO_G0_SW_Save_Reg: - case NITIO_G1_SW_Save_Reg: + case NITIO_G0_HW_SAVE: + case NITIO_G1_HW_SAVE: + case NITIO_G0_SW_SAVE: + case NITIO_G1_SW_SAVE: stc_register = ni_gpct_to_stc_register(reg); return devpriv->stc_readl(dev, stc_register); - break; /* 16 bit registers */ default: @@ -4391,11 +4225,10 @@ static int ni_E_init(struct comedi_device *dev) s->maxdata = (1 << board->aobits) - 1; s->range_table = board->ao_range_table; s->insn_read = &ni_ao_insn_read; - if (board->reg_type & ni_reg_6xxx_mask) { + if (board->reg_type & ni_reg_6xxx_mask) s->insn_write = &ni_ao_insn_write_671x; - } else { + else s->insn_write = &ni_ao_insn_write; - } s->insn_config = &ni_ao_insn_config; #ifdef PCIDMA if (board->n_aochan) { @@ -4429,7 +4262,7 @@ static int ni_E_init(struct comedi_device *dev) s->n_chan = board->num_p0_dio_channels; if (board->reg_type & ni_reg_m_series_mask) { s->subdev_flags |= - SDF_LSAMPL | SDF_CMD_WRITE /* | SDF_CMD_READ */ ; + SDF_LSAMPL | SDF_CMD_WRITE /* | SDF_CMD_READ */; s->insn_bits = &ni_m_series_dio_insn_bits; s->insn_config = &ni_m_series_dio_insn_config; s->do_cmd = &ni_cdio_cmd; @@ -4449,11 +4282,10 @@ static int ni_E_init(struct comedi_device *dev) /* 8255 device */ s = &dev->subdevices[NI_8255_DIO_SUBDEV]; - if (board->has_8255) { + if (board->has_8255) subdev_8255_init(dev, s, ni_8255_callback, (unsigned long)dev); - } else { + else s->type = COMEDI_SUBD_UNUSED; - } /* formerly general purpose counter/timer device, but no longer used */ s = &dev->subdevices[NI_UNUSED_SUBDEV]; @@ -4511,9 +4343,8 @@ static int ni_E_init(struct comedi_device *dev) s->n_chan = 10; } s->maxdata = 1; - if (board->reg_type & ni_reg_m_series_mask) { + if (board->reg_type & ni_reg_m_series_mask) s->insn_bits = &ni_pfi_insn_bits; - } s->insn_config = &ni_pfi_insn_config; ni_set_bits(dev, IO_Bidirection_Pin_Register, ~0, 0); @@ -4553,11 +4384,10 @@ static int ni_E_init(struct comedi_device *dev) s->insn_config = ni_rtsi_insn_config; ni_rtsi_init(dev); - if (board->reg_type & ni_reg_m_series_mask) { + if (board->reg_type & ni_reg_m_series_mask) counter_variant = ni_gpct_variant_m_series; - } else { + else counter_variant = ni_gpct_variant_e_series; - } devpriv->counter_dev = ni_gpct_device_construct(dev, &ni_gpct_write_register, &ni_gpct_read_register, @@ -4573,14 +4403,14 @@ static int ni_E_init(struct comedi_device *dev) s->maxdata = 0xffffffff; else s->maxdata = 0xffffff; - s->insn_read = &ni_gpct_insn_read; - s->insn_write = &ni_gpct_insn_write; - s->insn_config = &ni_gpct_insn_config; + s->insn_read = ni_tio_insn_read; + s->insn_write = ni_tio_insn_read; + s->insn_config = ni_tio_insn_config; #ifdef PCIDMA s->subdev_flags |= SDF_CMD_READ /* | SDF_CMD_WRITE */; s->do_cmd = &ni_gpct_cmd; s->len_chanlist = 1; - s->do_cmdtest = &ni_gpct_cmdtest; + s->do_cmdtest = ni_tio_cmdtest; s->cancel = &ni_gpct_cancel; s->async_dma_dir = DMA_BIDIRECTIONAL; #endif @@ -4901,7 +4731,7 @@ static int pack_ad8842(int addr, int val, int *bitstring); struct caldac_struct { int n_chans; int n_bits; - int (*packbits) (int, int, int *); + int (*packbits)(int, int, int *); }; static struct caldac_struct caldacs[] = { @@ -4944,9 +4774,8 @@ static void caldac_setup(struct comedi_device *dev, struct comedi_subdevice *s) if (diffbits) { unsigned int *maxdata_list; - if (n_chans > MAX_N_CALDACS) { + if (n_chans > MAX_N_CALDACS) printk("BUG! MAX_N_CALDACS too small\n"); - } s->maxdata_list = maxdata_list = devpriv->caldac_maxdata_list; chan = 0; for (i = 0; i < n_dacs; i++) { @@ -5143,36 +4972,11 @@ static void GPCT_Reset(struct comedi_device *dev, int chan) #endif -static int ni_gpct_insn_config(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) -{ - struct ni_gpct *counter = s->private; - return ni_tio_insn_config(counter, insn, data); -} - -static int ni_gpct_insn_read(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) -{ - struct ni_gpct *counter = s->private; - return ni_tio_rinsn(counter, insn, data); -} - -static int ni_gpct_insn_write(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) -{ - struct ni_gpct *counter = s->private; - return ni_tio_winsn(counter, insn, data); -} - #ifdef PCIDMA static int ni_gpct_cmd(struct comedi_device *dev, struct comedi_subdevice *s) { - int retval; struct ni_gpct *counter = s->private; -/* const struct comedi_cmd *cmd = &s->async->cmd; */ + int retval; retval = ni_request_gpct_mite_channel(dev, counter->counter_index, COMEDI_INPUT); @@ -5183,19 +4987,8 @@ static int ni_gpct_cmd(struct comedi_device *dev, struct comedi_subdevice *s) } ni_tio_acknowledge_and_confirm(counter, NULL, NULL, NULL, NULL); ni_e_series_enable_second_irq(dev, counter->counter_index, 1); - retval = ni_tio_cmd(counter, s->async); - return retval; -} -#endif -#ifdef PCIDMA -static int ni_gpct_cmdtest(struct comedi_device *dev, - struct comedi_subdevice *s, struct comedi_cmd *cmd) -{ - struct ni_gpct *counter = s->private; - - return ni_tio_cmdtest(counter, cmd); - return -ENOTSUPP; + return ni_tio_cmd(dev, s); } #endif @@ -5330,9 +5123,8 @@ static int ni_config_filter(struct comedi_device *dev, unsigned pfi_channel, struct ni_private *devpriv __maybe_unused = dev->private; unsigned bits; - if ((board->reg_type & ni_reg_m_series_mask) == 0) { + if ((board->reg_type & ni_reg_m_series_mask) == 0) return -ENOTSUPP; - } bits = ni_readl(M_Offset_PFI_Filter); bits &= ~MSeries_PFI_Filter_Select_Mask(pfi_channel); bits |= MSeries_PFI_Filter_Select_Bits(pfi_channel, filter); @@ -5413,9 +5205,8 @@ static void ni_rtsi_init(struct comedi_device *dev) /* Set clock mode to internal */ devpriv->clock_and_fout2 = MSeries_RTSI_10MHz_Bit; - if (ni_set_master_clock(dev, NI_MIO_INTERNAL_CLOCK, 0) < 0) { + if (ni_set_master_clock(dev, NI_MIO_INTERNAL_CLOCK, 0) < 0) printk("ni_set_master_clock failed, bug?"); - } /* default internal lines routing to RTSI bus lines */ devpriv->rtsi_trig_a_output_reg = RTSI_Trig_Output_Bits(0, @@ -5598,9 +5389,8 @@ static int ni_mseries_set_pll_master_clock(struct comedi_device *dev, devpriv->clock_source = source; /* it seems to typically take a few hundred microseconds for PLL to lock */ for (i = 0; i < timeout; ++i) { - if (ni_readw(M_Offset_PLL_Status) & MSeries_PLL_Locked_Bit) { + if (ni_readw(M_Offset_PLL_Status) & MSeries_PLL_Locked_Bit) break; - } udelay(1); } if (i == timeout) { @@ -5822,13 +5612,11 @@ static int cs5529_wait_for_idle(struct comedi_device *dev) for (i = 0; i < timeout; i++) { status = ni_ao_win_inw(dev, CAL_ADC_Status_67xx); - if ((status & CSS_ADC_BUSY) == 0) { + if ((status & CSS_ADC_BUSY) == 0) break; - } set_current_state(TASK_INTERRUPTIBLE); - if (schedule_timeout(1)) { + if (schedule_timeout(1)) return -EIO; - } } /* printk("looped %i times waiting for idle\n", i); */ if (i == timeout) { @@ -5854,9 +5642,8 @@ static void cs5529_command(struct comedi_device *dev, unsigned short value) udelay(1); } /* printk("looped %i times writing command to cs5529\n", i); */ - if (i == timeout) { + if (i == timeout) comedi_error(dev, "possible problem - never saw adc go busy?"); - } } /* write to cs5529 register */ @@ -5873,25 +5660,6 @@ static void cs5529_config_write(struct comedi_device *dev, unsigned int value, comedi_error(dev, "time or signal in cs5529_config_write()"); } -#ifdef NI_CS5529_DEBUG -/* read from cs5529 register */ -static unsigned int cs5529_config_read(struct comedi_device *dev, - unsigned int reg_select_bits) -{ - unsigned int value; - - reg_select_bits &= CSCMD_REGISTER_SELECT_MASK; - cs5529_command(dev, CSCMD_COMMAND | CSCMD_READ | reg_select_bits); - if (cs5529_wait_for_idle(dev)) - comedi_error(dev, "timeout or signal in cs5529_config_read()"); - value = (ni_ao_win_inw(dev, - CAL_ADC_Config_Data_High_Word_67xx) << 16) & - 0xff0000; - value |= ni_ao_win_inw(dev, CAL_ADC_Config_Data_Low_Word_67xx) & 0xffff; - return value; -} -#endif - static int cs5529_do_conversion(struct comedi_device *dev, unsigned short *data) { int retval; @@ -5968,12 +5736,5 @@ static int init_cs5529(struct comedi_device *dev) if (cs5529_wait_for_idle(dev)) comedi_error(dev, "timeout or signal in init_cs5529()\n"); #endif -#ifdef NI_CS5529_DEBUG - printk("config: 0x%x\n", cs5529_config_read(dev, - CSCMD_CONFIG_REGISTER)); - printk("gain: 0x%x\n", cs5529_config_read(dev, CSCMD_GAIN_REGISTER)); - printk("offset: 0x%x\n", cs5529_config_read(dev, - CSCMD_OFFSET_REGISTER)); -#endif return 0; } diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c index 229a273f2016..de421486b758 100644 --- a/drivers/staging/comedi/drivers/ni_mio_cs.c +++ b/drivers/staging/comedi/drivers/ni_mio_cs.c @@ -47,8 +47,6 @@ See the notes in the ni_atmio.o driver. #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> -#undef DEBUG - #define ATMIO 1 #undef PCIMIO diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c index e3a8fa96d9b3..30c46a3c1767 100644 --- a/drivers/staging/comedi/drivers/ni_pcidio.c +++ b/drivers/staging/comedi/drivers/ni_pcidio.c @@ -47,8 +47,6 @@ comedi_nonfree_firmware tarball available from http://www.comedi.org */ #define USE_DMA -/* #define DEBUG 1 */ -/* #define DEBUG_FLAGS */ #include <linux/module.h> #include <linux/delay.h> @@ -60,13 +58,6 @@ comedi_nonfree_firmware tarball available from http://www.comedi.org #include "comedi_fc.h" #include "mite.h" -#undef DPRINTK -#ifdef DEBUG -#define DPRINTK(format, args...) pr_debug(format, ## args) -#else -#define DPRINTK(format, args...) do { } while (0) -#endif - #define PCI_DIO_SIZE 4096 #define PCI_MITE_SIZE 4096 @@ -319,14 +310,6 @@ static int ni_pcidio_ns_to_timer(int *nanosec, int round_mode); static int setup_mite_dma(struct comedi_device *dev, struct comedi_subdevice *s); -#ifdef DEBUG_FLAGS -static void ni_pcidio_print_flags(unsigned int flags); -static void ni_pcidio_print_status(unsigned int status); -#else -#define ni_pcidio_print_flags(x) -#define ni_pcidio_print_status(x) -#endif - static int ni_pcidio_request_di_mite_channel(struct comedi_device *dev) { struct nidio96_private *devpriv = dev->private; @@ -401,7 +384,7 @@ static irqreturn_t nidio_interrupt(int irq, void *d) { struct comedi_device *dev = d; struct nidio96_private *devpriv = dev->private; - struct comedi_subdevice *s = &dev->subdevices[0]; + struct comedi_subdevice *s = dev->read_subdev; struct comedi_async *async = s->async; struct mite_struct *mite = devpriv->mite; @@ -427,19 +410,10 @@ static irqreturn_t nidio_interrupt(int irq, void *d) Interrupt_And_Window_Status); flags = readb(devpriv->mite->daq_io_addr + Group_1_Flags); - DPRINTK("ni_pcidio_interrupt: status=0x%02x,flags=0x%02x\n", - status, flags); - ni_pcidio_print_flags(flags); - ni_pcidio_print_status(status); - spin_lock(&devpriv->mite_channel_lock); if (devpriv->di_mite_chan) m_status = mite_get_status(devpriv->di_mite_chan); -#ifdef MITE_DEBUG - mite_print_chsr(m_status); -#endif - /* mite_dump_regs(mite); */ if (m_status & CHSR_INT) { if (m_status & CHSR_LINKC) { writel(CHOR_CLRLC, @@ -450,7 +424,8 @@ static irqreturn_t nidio_interrupt(int irq, void *d) } if (m_status & ~(CHSR_INT | CHSR_LINKC | CHSR_DONE | CHSR_DRDY | CHSR_DRQ1 | CHSR_MRDY)) { - DPRINTK("unknown mite interrupt, disabling IRQ\n"); + dev_dbg(dev->class_dev, + "unknown mite interrupt, disabling IRQ\n"); async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; disable_irq(dev->irq); } @@ -460,7 +435,7 @@ static irqreturn_t nidio_interrupt(int irq, void *d) while (status & DataLeft) { work++; if (work > 20) { - DPRINTK("too much work in interrupt\n"); + dev_dbg(dev->class_dev, "too much work in interrupt\n"); writeb(0x00, devpriv->mite->daq_io_addr + Master_DMA_And_Interrupt_Control); @@ -470,11 +445,11 @@ static irqreturn_t nidio_interrupt(int irq, void *d) flags &= IntEn; if (flags & TransferReady) { - /* DPRINTK("TransferReady\n"); */ while (flags & TransferReady) { work++; if (work > 100) { - DPRINTK("too much work in interrupt\n"); + dev_dbg(dev->class_dev, + "too much work in interrupt\n"); writeb(0x00, devpriv->mite->daq_io_addr + Master_DMA_And_Interrupt_Control @@ -488,21 +463,13 @@ static irqreturn_t nidio_interrupt(int irq, void *d) data2 = (auxdata & 0xffff0000) >> 16; comedi_buf_put(async, data1); comedi_buf_put(async, data2); - /* DPRINTK("read:%d, %d\n",data1,data2); */ flags = readb(devpriv->mite->daq_io_addr + Group_1_Flags); } - /* DPRINTK("buf_int_count: %d\n", - async->buf_int_count); */ - /* DPRINTK("1) IntEn=%d,flags=%d,status=%d\n", - IntEn,flags,status); */ - /* ni_pcidio_print_flags(flags); */ - /* ni_pcidio_print_status(status); */ async->events |= COMEDI_CB_BLOCK; } if (flags & CountExpired) { - DPRINTK("CountExpired\n"); writeb(ClearExpired, devpriv->mite->daq_io_addr + Group_1_Second_Clear); @@ -511,41 +478,26 @@ static irqreturn_t nidio_interrupt(int irq, void *d) writeb(0x00, devpriv->mite->daq_io_addr + OpMode); break; } else if (flags & Waited) { - DPRINTK("Waited\n"); writeb(ClearWaited, devpriv->mite->daq_io_addr + Group_1_First_Clear); async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; break; } else if (flags & PrimaryTC) { - DPRINTK("PrimaryTC\n"); writeb(ClearPrimaryTC, devpriv->mite->daq_io_addr + Group_1_First_Clear); async->events |= COMEDI_CB_EOA; } else if (flags & SecondaryTC) { - DPRINTK("SecondaryTC\n"); writeb(ClearSecondaryTC, devpriv->mite->daq_io_addr + Group_1_First_Clear); async->events |= COMEDI_CB_EOA; } -#if 0 - else { - DPRINTK("ni_pcidio: unknown interrupt\n"); - async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA; - writeb(0x00, - devpriv->mite->daq_io_addr + - Master_DMA_And_Interrupt_Control); - } -#endif + flags = readb(devpriv->mite->daq_io_addr + Group_1_Flags); status = readb(devpriv->mite->daq_io_addr + Interrupt_And_Window_Status); - /* DPRINTK("loop end: IntEn=0x%02x,flags=0x%02x," - "status=0x%02x\n", IntEn, flags, status); */ - /* ni_pcidio_print_flags(flags); */ - /* ni_pcidio_print_status(status); */ } out: @@ -562,82 +514,6 @@ out: return IRQ_HANDLED; } -#ifdef DEBUG_FLAGS -static const char *bit_set_string(unsigned int bits, unsigned int bit, - const char *const strings[]) -{ - return (bits & (1U << bit)) ? strings[bit] : ""; -} - -static const char *const flags_strings[] = { - " TransferReady", " CountExpired", " 2", " 3", - " 4", " Waited", " PrimaryTC", " SecondaryTC", -}; - - -static void ni_pcidio_print_flags(unsigned int flags) -{ - pr_debug("group_1_flags:%s%s%s%s%s%s%s%s\n", - bit_set_string(flags, 7, flags_strings), - bit_set_string(flags, 6, flags_strings), - bit_set_string(flags, 5, flags_strings), - bit_set_string(flags, 4, flags_strings), - bit_set_string(flags, 3, flags_strings), - bit_set_string(flags, 2, flags_strings), - bit_set_string(flags, 1, flags_strings), - bit_set_string(flags, 0, flags_strings)); -} - -static const char *const status_strings[] = { - " DataLeft1", " Reserved1", " Req1", " StopTrig1", - " DataLeft2", " Reserved2", " Req2", " StopTrig2", -}; - -static void ni_pcidio_print_status(unsigned int flags) -{ - pr_debug("group_status:%s%s%s%s%s%s%s%s\n", - bit_set_string(flags, 7, status_strings), - bit_set_string(flags, 6, status_strings), - bit_set_string(flags, 5, status_strings), - bit_set_string(flags, 4, status_strings), - bit_set_string(flags, 3, status_strings), - bit_set_string(flags, 2, status_strings), - bit_set_string(flags, 1, status_strings), - bit_set_string(flags, 0, status_strings)); -} -#endif - -#ifdef unused -static void debug_int(struct comedi_device *dev) -{ - struct nidio96_private *devpriv = dev->private; - int a, b; - static int n_int; - struct timeval tv; - - do_gettimeofday(&tv); - a = readb(devpriv->mite->daq_io_addr + Group_Status); - b = readb(devpriv->mite->daq_io_addr + Group_1_Flags); - - if (n_int < 10) { - DPRINTK("status 0x%02x flags 0x%02x time %06d\n", a, b, - (int)tv.tv_usec); - } - - while (b & 1) { - writew(0xff, devpriv->mite->daq_io_addr + Group_1_FIFO); - b = readb(devpriv->mite->daq_io_addr + Group_1_Flags); - } - - b = readb(devpriv->mite->daq_io_addr + Group_1_Flags); - - if (n_int < 10) { - DPRINTK("new status 0x%02x\n", b); - n_int++; - } -} -#endif - static int ni_pcidio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, @@ -883,7 +759,6 @@ static int ni_pcidio_cmd(struct comedi_device *dev, struct comedi_subdevice *s) s->async->inttrig = ni_pcidio_inttrig; } - DPRINTK("ni_pcidio: command started\n"); return 0; } @@ -1074,6 +949,19 @@ static int pci_6534_upload_firmware(struct comedi_device *dev) return ret; } +static void nidio_reset_board(struct comedi_device *dev) +{ + struct nidio96_private *devpriv = dev->private; + void __iomem *daq_mmio = devpriv->mite->daq_io_addr; + + writel(0, daq_mmio + Port_IO(0)); + writel(0, daq_mmio + Port_Pin_Directions(0)); + writel(0, daq_mmio + Port_Pin_Mask(0)); + + /* disable interrupts on board */ + writeb(0, daq_mmio + Master_DMA_And_Interrupt_Control); +} + static int nidio_auto_attach(struct comedi_device *dev, unsigned long context) { @@ -1115,13 +1003,14 @@ static int nidio_auto_attach(struct comedi_device *dev, if (devpriv->di_mite_ring == NULL) return -ENOMEM; - irq = mite_irq(devpriv->mite); if (board->uses_firmware) { ret = pci_6534_upload_firmware(dev); if (ret < 0) return ret; } + nidio_reset_board(dev); + ret = comedi_alloc_subdevices(dev, 1); if (ret) return ret; @@ -1149,21 +1038,13 @@ static int nidio_auto_attach(struct comedi_device *dev, s->async_dma_dir = DMA_BIDIRECTIONAL; s->poll = &ni_pcidio_poll; - writel(0, devpriv->mite->daq_io_addr + Port_IO(0)); - writel(0, devpriv->mite->daq_io_addr + Port_Pin_Directions(0)); - writel(0, devpriv->mite->daq_io_addr + Port_Pin_Mask(0)); - - /* disable interrupts on board */ - writeb(0x00, - devpriv->mite->daq_io_addr + - Master_DMA_And_Interrupt_Control); - - ret = request_irq(irq, nidio_interrupt, IRQF_SHARED, - "ni_pcidio", dev); - if (ret < 0) - dev_warn(dev->class_dev, "irq not available\n"); - - dev->irq = irq; + irq = mite_irq(devpriv->mite); + if (irq) { + ret = request_irq(irq, nidio_interrupt, IRQF_SHARED, + dev->board_name, dev); + if (ret == 0) + dev->irq = irq; + } return 0; } @@ -1200,7 +1081,7 @@ static int ni_pcidio_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &ni_pcidio_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(ni_pcidio_pci_table) = { +static const struct pci_device_id ni_pcidio_pci_table[] = { { PCI_VDEVICE(NI, 0x1150), BOARD_PCIDIO_32HS }, { PCI_VDEVICE(NI, 0x12b0), BOARD_PCI6534 }, { PCI_VDEVICE(NI, 0x1320), BOARD_PXI6533 }, diff --git a/drivers/staging/comedi/drivers/ni_pcimio.c b/drivers/staging/comedi/drivers/ni_pcimio.c index 536be83af549..0ed980455875 100644 --- a/drivers/staging/comedi/drivers/ni_pcimio.c +++ b/drivers/staging/comedi/drivers/ni_pcimio.c @@ -116,8 +116,6 @@ Bugs: #include "ni_stc.h" #include "mite.h" -/* #define PCI_DEBUG */ - #define PCIDMA #define PCIMIO 1 @@ -134,24 +132,26 @@ Bugs: 63 different possibilities. An AO channel can not act as it's own OFFSET or REFERENCE. */ -static const struct comedi_lrange range_ni_M_628x_ao = { 8, { - RANGE(-10, 10), - RANGE(-5, 5), - RANGE(-2, 2), - RANGE(-1, 1), - RANGE(-5, 15), - RANGE(0, 10), - RANGE(3, 7), - RANGE(4, 6), - RANGE_ext(-1, 1) - } +static const struct comedi_lrange range_ni_M_628x_ao = { + 8, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2), + BIP_RANGE(1), + RANGE(-5, 15), + UNI_RANGE(10), + RANGE(3, 7), + RANGE(4, 6), + RANGE_ext(-1, 1) + } }; -static const struct comedi_lrange range_ni_M_625x_ao = { 3, { - RANGE(-10, 10), - RANGE(-5, 5), - RANGE_ext(-1, 1) - } +static const struct comedi_lrange range_ni_M_625x_ao = { + 3, { + BIP_RANGE(10), + BIP_RANGE(5), + RANGE_ext(-1, 1) + } }; enum ni_pcimio_boardid { @@ -1178,9 +1178,9 @@ static void m_series_stc_writew(struct comedi_device *dev, uint16_t data, offset = M_Offset_AO_FIFO_Clear; break; case DIO_Control_Register: - printk - ("%s: FIXME: register 0x%x does not map cleanly on to m-series boards.\n", - __func__, reg); + dev_dbg(dev->class_dev, + "%s: FIXME: register 0x%x does not map cleanly on to m-series boards.\n", + __func__, reg); return; break; case G_Autoincrement_Register(0): @@ -1471,6 +1471,7 @@ static int pcimio_auto_attach(struct comedi_device *dev, struct pci_dev *pcidev = comedi_to_pci_dev(dev); const struct ni_board_struct *board = NULL; struct ni_private *devpriv; + unsigned int irq; int ret; if (context < ARRAY_SIZE(ni_boards)) @@ -1532,18 +1533,12 @@ static int pcimio_auto_attach(struct comedi_device *dev, if (board->reg_type == ni_reg_6143) init_6143(dev); - dev->irq = mite_irq(devpriv->mite); - - if (dev->irq == 0) { - pr_warn("unknown irq (bad)\n"); - } else { - pr_debug("( irq = %u )\n", dev->irq); - ret = request_irq(dev->irq, ni_E_interrupt, NI_E_IRQ_FLAGS, - DRV_NAME, dev); - if (ret < 0) { - pr_warn("irq not available\n"); - dev->irq = 0; - } + irq = mite_irq(devpriv->mite); + if (irq) { + ret = request_irq(irq, ni_E_interrupt, NI_E_IRQ_FLAGS, + dev->board_name, dev); + if (ret == 0) + dev->irq = irq; } ret = ni_E_init(dev); @@ -1639,7 +1634,7 @@ static int ni_pcimio_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &ni_pcimio_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(ni_pcimio_pci_table) = { +static const struct pci_device_id ni_pcimio_pci_table[] = { { PCI_VDEVICE(NI, 0x0162), BOARD_PCIMIO_16XE_50 }, /* 0x1620? */ { PCI_VDEVICE(NI, 0x1170), BOARD_PCIMIO_16XE_10 }, { PCI_VDEVICE(NI, 0x1180), BOARD_PCIMIO_16E_1 }, diff --git a/drivers/staging/comedi/drivers/ni_tio.c b/drivers/staging/comedi/drivers/ni_tio.c index 9b120c77d83a..92691b491c24 100644 --- a/drivers/staging/comedi/drivers/ni_tio.c +++ b/drivers/staging/comedi/drivers/ni_tio.c @@ -53,10 +53,6 @@ static uint64_t ni_tio_clock_period_ps(const struct ni_gpct *counter, unsigned generic_clock_source); static unsigned ni_tio_generic_clock_src_select(const struct ni_gpct *counter); -MODULE_AUTHOR("Comedi <comedi@comedi.org>"); -MODULE_DESCRIPTION("Comedi support for NI general-purpose counters"); -MODULE_LICENSE("GPL"); - static inline enum Gi_Counting_Mode_Reg_Bits Gi_Alternate_Sync_Bit(enum ni_gpct_variant variant) @@ -277,19 +273,6 @@ static inline unsigned NI_660x_RTSI_Second_Gate_Select(unsigned n) static const unsigned int counter_status_mask = COMEDI_COUNTER_ARMED | COMEDI_COUNTER_COUNTING; -static int __init ni_tio_init_module(void) -{ - return 0; -} - -module_init(ni_tio_init_module); - -static void __exit ni_tio_cleanup_module(void) -{ -} - -module_exit(ni_tio_cleanup_module); - struct ni_gpct_device *ni_gpct_device_construct(struct comedi_device *dev, void (*write_register) (struct ni_gpct @@ -362,74 +345,64 @@ static int ni_tio_second_gate_registers_present(const struct ni_gpct_device static void ni_tio_reset_count_and_disarm(struct ni_gpct *counter) { - write_register(counter, Gi_Reset_Bit(counter->counter_index), - NITIO_Gxx_Joint_Reset_Reg(counter->counter_index)); + unsigned cidx = counter->counter_index; + + write_register(counter, Gi_Reset_Bit(cidx), NITIO_RESET_REG(cidx)); } void ni_tio_init_counter(struct ni_gpct *counter) { struct ni_gpct_device *counter_dev = counter->counter_dev; + unsigned cidx = counter->counter_index; ni_tio_reset_count_and_disarm(counter); + /* initialize counter registers */ - counter_dev->regs[NITIO_Gi_Autoincrement_Reg(counter->counter_index)] = - 0x0; - write_register(counter, - counter_dev-> - regs[NITIO_Gi_Autoincrement_Reg(counter->counter_index)], - NITIO_Gi_Autoincrement_Reg(counter->counter_index)); - ni_tio_set_bits(counter, NITIO_Gi_Command_Reg(counter->counter_index), + counter_dev->regs[NITIO_AUTO_INC_REG(cidx)] = 0x0; + write_register(counter, counter_dev->regs[NITIO_AUTO_INC_REG(cidx)], + NITIO_AUTO_INC_REG(cidx)); + + ni_tio_set_bits(counter, NITIO_CMD_REG(cidx), ~0, Gi_Synchronize_Gate_Bit); - ni_tio_set_bits(counter, NITIO_Gi_Mode_Reg(counter->counter_index), ~0, - 0); - counter_dev->regs[NITIO_Gi_LoadA_Reg(counter->counter_index)] = 0x0; - write_register(counter, - counter_dev-> - regs[NITIO_Gi_LoadA_Reg(counter->counter_index)], - NITIO_Gi_LoadA_Reg(counter->counter_index)); - counter_dev->regs[NITIO_Gi_LoadB_Reg(counter->counter_index)] = 0x0; - write_register(counter, - counter_dev-> - regs[NITIO_Gi_LoadB_Reg(counter->counter_index)], - NITIO_Gi_LoadB_Reg(counter->counter_index)); - ni_tio_set_bits(counter, - NITIO_Gi_Input_Select_Reg(counter->counter_index), ~0, - 0); - if (ni_tio_counting_mode_registers_present(counter_dev)) { - ni_tio_set_bits(counter, - NITIO_Gi_Counting_Mode_Reg(counter-> - counter_index), ~0, - 0); - } + + ni_tio_set_bits(counter, NITIO_MODE_REG(cidx), ~0, 0); + + counter_dev->regs[NITIO_LOADA_REG(cidx)] = 0x0; + write_register(counter, counter_dev->regs[NITIO_LOADA_REG(cidx)], + NITIO_LOADA_REG(cidx)); + + counter_dev->regs[NITIO_LOADB_REG(cidx)] = 0x0; + write_register(counter, counter_dev->regs[NITIO_LOADB_REG(cidx)], + NITIO_LOADB_REG(cidx)); + + ni_tio_set_bits(counter, NITIO_INPUT_SEL_REG(cidx), ~0, 0); + + if (ni_tio_counting_mode_registers_present(counter_dev)) + ni_tio_set_bits(counter, NITIO_CNT_MODE_REG(cidx), ~0, 0); + if (ni_tio_second_gate_registers_present(counter_dev)) { - counter_dev-> - regs[NITIO_Gi_Second_Gate_Reg(counter->counter_index)] = - 0x0; + counter_dev->regs[NITIO_GATE2_REG(cidx)] = 0x0; write_register(counter, - counter_dev-> - regs[NITIO_Gi_Second_Gate_Reg - (counter->counter_index)], - NITIO_Gi_Second_Gate_Reg(counter-> - counter_index)); + counter_dev->regs[NITIO_GATE2_REG(cidx)], + NITIO_GATE2_REG(cidx)); } - ni_tio_set_bits(counter, - NITIO_Gi_DMA_Config_Reg(counter->counter_index), ~0, - 0x0); - ni_tio_set_bits(counter, - NITIO_Gi_Interrupt_Enable_Reg(counter->counter_index), - ~0, 0x0); + + ni_tio_set_bits(counter, NITIO_DMA_CFG_REG(cidx), ~0, 0x0); + + ni_tio_set_bits(counter, NITIO_INT_ENA_REG(cidx), ~0, 0x0); } EXPORT_SYMBOL_GPL(ni_tio_init_counter); static unsigned int ni_tio_counter_status(struct ni_gpct *counter) { - unsigned int status = 0; + unsigned cidx = counter->counter_index; const unsigned bits = read_register(counter, - NITIO_Gxx_Status_Reg(counter-> - counter_index)); - if (bits & Gi_Armed_Bit(counter->counter_index)) { + NITIO_SHARED_STATUS_REG(cidx)); + unsigned int status = 0; + + if (bits & Gi_Armed_Bit(cidx)) { status |= COMEDI_COUNTER_ARMED; - if (bits & Gi_Counting_Bit(counter->counter_index)) + if (bits & Gi_Counting_Bit(cidx)) status |= COMEDI_COUNTER_COUNTING; } return status; @@ -438,8 +411,8 @@ static unsigned int ni_tio_counter_status(struct ni_gpct *counter) static void ni_tio_set_sync_mode(struct ni_gpct *counter, int force_alt_sync) { struct ni_gpct_device *counter_dev = counter->counter_dev; - const unsigned counting_mode_reg = - NITIO_Gi_Counting_Mode_Reg(counter->counter_index); + unsigned cidx = counter->counter_index; + const unsigned counting_mode_reg = NITIO_CNT_MODE_REG(cidx); static const uint64_t min_normal_sync_period_ps = 25000; const uint64_t clock_period_ps = ni_tio_clock_period_ps(counter, ni_tio_generic_clock_src_select @@ -476,6 +449,7 @@ static void ni_tio_set_sync_mode(struct ni_gpct *counter, int force_alt_sync) static int ni_tio_set_counter_mode(struct ni_gpct *counter, unsigned mode) { struct ni_gpct_device *counter_dev = counter->counter_dev; + unsigned cidx = counter->counter_index; unsigned mode_reg_mask; unsigned mode_reg_values; unsigned input_select_bits = 0; @@ -502,7 +476,7 @@ static int ni_tio_set_counter_mode(struct ni_gpct *counter, unsigned mode) default: break; } - ni_tio_set_bits(counter, NITIO_Gi_Mode_Reg(counter->counter_index), + ni_tio_set_bits(counter, NITIO_MODE_REG(cidx), mode_reg_mask, mode_reg_values); if (ni_tio_counting_mode_registers_present(counter_dev)) { @@ -515,15 +489,13 @@ static int ni_tio_set_counter_mode(struct ni_gpct *counter, unsigned mode) Gi_Index_Phase_Bitshift) & Gi_Index_Phase_Mask; if (mode & NI_GPCT_INDEX_ENABLE_BIT) counting_mode_bits |= Gi_Index_Mode_Bit; - ni_tio_set_bits(counter, - NITIO_Gi_Counting_Mode_Reg(counter-> - counter_index), + ni_tio_set_bits(counter, NITIO_CNT_MODE_REG(cidx), Gi_Counting_Mode_Mask | Gi_Index_Phase_Mask | Gi_Index_Mode_Bit, counting_mode_bits); ni_tio_set_sync_mode(counter, 0); } - ni_tio_set_bits(counter, NITIO_Gi_Command_Reg(counter->counter_index), + ni_tio_set_bits(counter, NITIO_CMD_REG(cidx), Gi_Up_Down_Mask, (mode >> NI_GPCT_COUNTING_DIRECTION_SHIFT) << Gi_Up_Down_Shift); @@ -532,8 +504,7 @@ static int ni_tio_set_counter_mode(struct ni_gpct *counter, unsigned mode) input_select_bits |= Gi_Or_Gate_Bit; if (mode & NI_GPCT_INVERT_OUTPUT_BIT) input_select_bits |= Gi_Output_Polarity_Bit; - ni_tio_set_bits(counter, - NITIO_Gi_Input_Select_Reg(counter->counter_index), + ni_tio_set_bits(counter, NITIO_INPUT_SEL_REG(cidx), Gi_Gate_Select_Load_Source_Bit | Gi_Or_Gate_Bit | Gi_Output_Polarity_Bit, input_select_bits); @@ -543,7 +514,7 @@ static int ni_tio_set_counter_mode(struct ni_gpct *counter, unsigned mode) int ni_tio_arm(struct ni_gpct *counter, int arm, unsigned start_trigger) { struct ni_gpct_device *counter_dev = counter->counter_dev; - + unsigned cidx = counter->counter_index; unsigned command_transient_bits = 0; if (arm) { @@ -581,9 +552,7 @@ int ni_tio_arm(struct ni_gpct *counter, int arm, unsigned start_trigger) } break; } - ni_tio_set_bits(counter, - NITIO_Gi_Counting_Mode_Reg - (counter->counter_index), + ni_tio_set_bits(counter, NITIO_CNT_MODE_REG(cidx), Gi_HW_Arm_Select_Mask (counter_dev->variant) | Gi_HW_Arm_Enable_Bit, @@ -592,8 +561,7 @@ int ni_tio_arm(struct ni_gpct *counter, int arm, unsigned start_trigger) } else { command_transient_bits |= Gi_Disarm_Bit; } - ni_tio_set_bits_transient(counter, - NITIO_Gi_Command_Reg(counter->counter_index), + ni_tio_set_bits_transient(counter, NITIO_CMD_REG(cidx), 0, 0, command_transient_bits); return 0; } @@ -717,8 +685,8 @@ static void ni_tio_set_source_subselect(struct ni_gpct *counter, unsigned int clock_source) { struct ni_gpct_device *counter_dev = counter->counter_dev; - const unsigned second_gate_reg = - NITIO_Gi_Second_Gate_Reg(counter->counter_index); + unsigned cidx = counter->counter_index; + const unsigned second_gate_reg = NITIO_GATE2_REG(cidx); if (counter_dev->variant != ni_gpct_variant_m_series) return; @@ -747,6 +715,7 @@ static int ni_tio_set_clock_src(struct ni_gpct *counter, unsigned int period_ns) { struct ni_gpct_device *counter_dev = counter->counter_dev; + unsigned cidx = counter->counter_index; unsigned input_select_bits = 0; static const uint64_t pico_per_nano = 1000; @@ -766,8 +735,7 @@ static int ni_tio_set_clock_src(struct ni_gpct *counter, } if (clock_source & NI_GPCT_INVERT_CLOCK_SRC_BIT) input_select_bits |= Gi_Source_Polarity_Bit; - ni_tio_set_bits(counter, - NITIO_Gi_Input_Select_Reg(counter->counter_index), + ni_tio_set_bits(counter, NITIO_INPUT_SEL_REG(cidx), Gi_Source_Select_Mask | Gi_Source_Polarity_Bit, input_select_bits); ni_tio_set_source_subselect(counter, clock_source); @@ -791,9 +759,7 @@ static int ni_tio_set_clock_src(struct ni_gpct *counter, return -EINVAL; break; } - ni_tio_set_bits(counter, - NITIO_Gi_Counting_Mode_Reg(counter-> - counter_index), + ni_tio_set_bits(counter, NITIO_CNT_MODE_REG(cidx), Gi_Prescale_X2_Bit(counter_dev->variant) | Gi_Prescale_X8_Bit(counter_dev->variant), counting_mode_bits); @@ -806,15 +772,12 @@ static int ni_tio_set_clock_src(struct ni_gpct *counter, static unsigned ni_tio_clock_src_modifiers(const struct ni_gpct *counter) { struct ni_gpct_device *counter_dev = counter->counter_dev; - const unsigned counting_mode_bits = ni_tio_get_soft_copy(counter, - NITIO_Gi_Counting_Mode_Reg - (counter-> - counter_index)); + unsigned cidx = counter->counter_index; + const unsigned counting_mode_bits = + ni_tio_get_soft_copy(counter, NITIO_CNT_MODE_REG(cidx)); unsigned bits = 0; - if (ni_tio_get_soft_copy(counter, - NITIO_Gi_Input_Select_Reg - (counter->counter_index)) & + if (ni_tio_get_soft_copy(counter, NITIO_INPUT_SEL_REG(cidx)) & Gi_Source_Polarity_Bit) bits |= NI_GPCT_INVERT_CLOCK_SRC_BIT; if (counting_mode_bits & Gi_Prescale_X2_Bit(counter_dev->variant)) @@ -827,15 +790,13 @@ static unsigned ni_tio_clock_src_modifiers(const struct ni_gpct *counter) static unsigned ni_m_series_clock_src_select(const struct ni_gpct *counter) { struct ni_gpct_device *counter_dev = counter->counter_dev; - const unsigned second_gate_reg = - NITIO_Gi_Second_Gate_Reg(counter->counter_index); + unsigned cidx = counter->counter_index; + const unsigned second_gate_reg = NITIO_GATE2_REG(cidx); unsigned clock_source = 0; unsigned i; - const unsigned input_select = (ni_tio_get_soft_copy(counter, - NITIO_Gi_Input_Select_Reg - (counter->counter_index)) - & Gi_Source_Select_Mask) >> - Gi_Source_Select_Shift; + const unsigned input_select = + (ni_tio_get_soft_copy(counter, NITIO_INPUT_SEL_REG(cidx)) & + Gi_Source_Select_Mask) >> Gi_Source_Select_Shift; switch (input_select) { case NI_M_Series_Timebase_1_Clock: @@ -895,12 +856,11 @@ static unsigned ni_m_series_clock_src_select(const struct ni_gpct *counter) static unsigned ni_660x_clock_src_select(const struct ni_gpct *counter) { unsigned clock_source = 0; + unsigned cidx = counter->counter_index; + const unsigned input_select = + (ni_tio_get_soft_copy(counter, NITIO_INPUT_SEL_REG(cidx)) & + Gi_Source_Select_Mask) >> Gi_Source_Select_Shift; unsigned i; - const unsigned input_select = (ni_tio_get_soft_copy(counter, - NITIO_Gi_Input_Select_Reg - (counter->counter_index)) - & Gi_Source_Select_Mask) >> - Gi_Source_Select_Shift; switch (input_select) { case NI_660x_Timebase_1_Clock: @@ -1022,6 +982,7 @@ static void ni_tio_set_first_gate_modifiers(struct ni_gpct *counter, unsigned int gate_source) { const unsigned mode_mask = Gi_Gate_Polarity_Bit | Gi_Gating_Mode_Mask; + unsigned cidx = counter->counter_index; unsigned mode_values = 0; if (gate_source & CR_INVERT) @@ -1030,7 +991,7 @@ static void ni_tio_set_first_gate_modifiers(struct ni_gpct *counter, mode_values |= Gi_Rising_Edge_Gating_Bits; else mode_values |= Gi_Level_Gating_Bits; - ni_tio_set_bits(counter, NITIO_Gi_Mode_Reg(counter->counter_index), + ni_tio_set_bits(counter, NITIO_MODE_REG(cidx), mode_mask, mode_values); } @@ -1038,6 +999,7 @@ static int ni_660x_set_first_gate(struct ni_gpct *counter, unsigned int gate_source) { const unsigned selected_gate = CR_CHAN(gate_source); + unsigned cidx = counter->counter_index; /* bits of selected_gate that may be meaningful to input select register */ const unsigned selected_gate_mask = 0x1f; unsigned ni_660x_gate_select; @@ -1075,8 +1037,7 @@ static int ni_660x_set_first_gate(struct ni_gpct *counter, return -EINVAL; break; } - ni_tio_set_bits(counter, - NITIO_Gi_Input_Select_Reg(counter->counter_index), + ni_tio_set_bits(counter, NITIO_INPUT_SEL_REG(cidx), Gi_Gate_Select_Mask, Gi_Gate_Select_Bits(ni_660x_gate_select)); return 0; @@ -1086,6 +1047,7 @@ static int ni_m_series_set_first_gate(struct ni_gpct *counter, unsigned int gate_source) { const unsigned selected_gate = CR_CHAN(gate_source); + unsigned cidx = counter->counter_index; /* bits of selected_gate that may be meaningful to input select register */ const unsigned selected_gate_mask = 0x1f; unsigned ni_m_series_gate_select; @@ -1124,8 +1086,7 @@ static int ni_m_series_set_first_gate(struct ni_gpct *counter, return -EINVAL; break; } - ni_tio_set_bits(counter, - NITIO_Gi_Input_Select_Reg(counter->counter_index), + ni_tio_set_bits(counter, NITIO_INPUT_SEL_REG(cidx), Gi_Gate_Select_Mask, Gi_Gate_Select_Bits(ni_m_series_gate_select)); return 0; @@ -1135,8 +1096,8 @@ static int ni_660x_set_second_gate(struct ni_gpct *counter, unsigned int gate_source) { struct ni_gpct_device *counter_dev = counter->counter_dev; - const unsigned second_gate_reg = - NITIO_Gi_Second_Gate_Reg(counter->counter_index); + unsigned cidx = counter->counter_index; + const unsigned second_gate_reg = NITIO_GATE2_REG(cidx); const unsigned selected_second_gate = CR_CHAN(gate_source); /* bits of second_gate that may be meaningful to second gate register */ static const unsigned selected_second_gate_mask = 0x1f; @@ -1194,8 +1155,8 @@ static int ni_m_series_set_second_gate(struct ni_gpct *counter, unsigned int gate_source) { struct ni_gpct_device *counter_dev = counter->counter_dev; - const unsigned second_gate_reg = - NITIO_Gi_Second_Gate_Reg(counter->counter_index); + unsigned cidx = counter->counter_index; + const unsigned second_gate_reg = NITIO_GATE2_REG(cidx); const unsigned selected_second_gate = CR_CHAN(gate_source); /* bits of second_gate that may be meaningful to second gate register */ static const unsigned selected_second_gate_mask = 0x1f; @@ -1222,15 +1183,13 @@ int ni_tio_set_gate_src(struct ni_gpct *counter, unsigned gate_index, unsigned int gate_source) { struct ni_gpct_device *counter_dev = counter->counter_dev; - const unsigned second_gate_reg = - NITIO_Gi_Second_Gate_Reg(counter->counter_index); + unsigned cidx = counter->counter_index; + const unsigned second_gate_reg = NITIO_GATE2_REG(cidx); switch (gate_index) { case 0: if (CR_CHAN(gate_source) == NI_GPCT_DISABLED_GATE_SELECT) { - ni_tio_set_bits(counter, - NITIO_Gi_Mode_Reg(counter-> - counter_index), + ni_tio_set_bits(counter, NITIO_MODE_REG(cidx), Gi_Gating_Mode_Mask, Gi_Gating_Disabled_Bits); return 0; @@ -1292,11 +1251,12 @@ static int ni_tio_set_other_src(struct ni_gpct *counter, unsigned index, unsigned int source) { struct ni_gpct_device *counter_dev = counter->counter_dev; + unsigned cidx = counter->counter_index; if (counter_dev->variant == ni_gpct_variant_m_series) { unsigned int abz_reg, shift, mask; - abz_reg = NITIO_Gi_ABZ_Reg(counter->counter_index); + abz_reg = NITIO_ABZ_REG(cidx); switch (index) { case NI_GPCT_SOURCE_ENCODER_A: shift = 10; @@ -1319,7 +1279,6 @@ static int ni_tio_set_other_src(struct ni_gpct *counter, unsigned index, counter_dev->regs[abz_reg] &= ~mask; counter_dev->regs[abz_reg] |= (source << shift) & mask; write_register(counter, counter_dev->regs[abz_reg], abz_reg); -/* printk("%s %x %d %d\n", __func__, counter_dev->regs[abz_reg], index, source); */ return 0; } return -EINVAL; @@ -1491,12 +1450,10 @@ static int ni_tio_get_gate_src(struct ni_gpct *counter, unsigned gate_index, unsigned int *gate_source) { struct ni_gpct_device *counter_dev = counter->counter_dev; - const unsigned mode_bits = ni_tio_get_soft_copy(counter, - NITIO_Gi_Mode_Reg - (counter-> - counter_index)); - const unsigned second_gate_reg = - NITIO_Gi_Second_Gate_Reg(counter->counter_index); + unsigned cidx = counter->counter_index; + const unsigned mode_bits = + ni_tio_get_soft_copy(counter, NITIO_MODE_REG(cidx)); + const unsigned second_gate_reg = NITIO_GATE2_REG(cidx); unsigned gate_select_bits; switch (gate_index) { @@ -1508,8 +1465,7 @@ static int ni_tio_get_gate_src(struct ni_gpct *counter, unsigned gate_index, } else { gate_select_bits = (ni_tio_get_soft_copy(counter, - NITIO_Gi_Input_Select_Reg - (counter->counter_index)) & + NITIO_INPUT_SEL_REG(cidx)) & Gi_Gate_Select_Mask) >> Gi_Gate_Select_Shift; } switch (counter_dev->variant) { @@ -1577,9 +1533,13 @@ static int ni_tio_get_gate_src(struct ni_gpct *counter, unsigned gate_index, return 0; } -int ni_tio_insn_config(struct ni_gpct *counter, - struct comedi_insn *insn, unsigned int *data) +int ni_tio_insn_config(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) { + struct ni_gpct *counter = s->private; + switch (data[0]) { case INSN_CONFIG_SET_COUNTER_MODE: return ni_tio_set_counter_mode(counter, data[1]); @@ -1623,11 +1583,15 @@ int ni_tio_insn_config(struct ni_gpct *counter, } EXPORT_SYMBOL_GPL(ni_tio_insn_config); -int ni_tio_rinsn(struct ni_gpct *counter, struct comedi_insn *insn, - unsigned int *data) +int ni_tio_insn_read(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) { + struct ni_gpct *counter = s->private; struct ni_gpct_device *counter_dev = counter->counter_dev; const unsigned channel = CR_CHAN(insn->chanspec); + unsigned cidx = counter->counter_index; unsigned first_read; unsigned second_read; unsigned correct_read; @@ -1636,65 +1600,57 @@ int ni_tio_rinsn(struct ni_gpct *counter, struct comedi_insn *insn, return 0; switch (channel) { case 0: - ni_tio_set_bits(counter, - NITIO_Gi_Command_Reg(counter->counter_index), + ni_tio_set_bits(counter, NITIO_CMD_REG(cidx), Gi_Save_Trace_Bit, 0); - ni_tio_set_bits(counter, - NITIO_Gi_Command_Reg(counter->counter_index), + ni_tio_set_bits(counter, NITIO_CMD_REG(cidx), Gi_Save_Trace_Bit, Gi_Save_Trace_Bit); /* The count doesn't get latched until the next clock edge, so it is possible the count may change (once) while we are reading. Since the read of the SW_Save_Reg isn't atomic (apparently even when it's a 32 bit register according to 660x docs), we need to read twice and make sure the reading hasn't changed. If it has, a third read will be correct since the count value will definitely have latched by then. */ - first_read = - read_register(counter, - NITIO_Gi_SW_Save_Reg(counter->counter_index)); - second_read = - read_register(counter, - NITIO_Gi_SW_Save_Reg(counter->counter_index)); + first_read = read_register(counter, NITIO_SW_SAVE_REG(cidx)); + second_read = read_register(counter, NITIO_SW_SAVE_REG(cidx)); if (first_read != second_read) correct_read = - read_register(counter, - NITIO_Gi_SW_Save_Reg(counter-> - counter_index)); + read_register(counter, NITIO_SW_SAVE_REG(cidx)); else correct_read = first_read; data[0] = correct_read; return 0; break; case 1: - data[0] = - counter_dev-> - regs[NITIO_Gi_LoadA_Reg(counter->counter_index)]; + data[0] = counter_dev->regs[NITIO_LOADA_REG(cidx)]; break; case 2: - data[0] = - counter_dev-> - regs[NITIO_Gi_LoadB_Reg(counter->counter_index)]; + data[0] = counter_dev->regs[NITIO_LOADB_REG(cidx)]; break; } return 0; } -EXPORT_SYMBOL_GPL(ni_tio_rinsn); +EXPORT_SYMBOL_GPL(ni_tio_insn_read); static unsigned ni_tio_next_load_register(struct ni_gpct *counter) { - const unsigned bits = read_register(counter, - NITIO_Gxx_Status_Reg(counter-> - counter_index)); + unsigned cidx = counter->counter_index; + const unsigned bits = + read_register(counter, NITIO_SHARED_STATUS_REG(cidx)); - if (bits & Gi_Next_Load_Source_Bit(counter->counter_index)) - return NITIO_Gi_LoadB_Reg(counter->counter_index); + if (bits & Gi_Next_Load_Source_Bit(cidx)) + return NITIO_LOADB_REG(cidx); else - return NITIO_Gi_LoadA_Reg(counter->counter_index); + return NITIO_LOADA_REG(cidx); } -int ni_tio_winsn(struct ni_gpct *counter, struct comedi_insn *insn, - unsigned int *data) +int ni_tio_insn_write(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) { + struct ni_gpct *counter = s->private; struct ni_gpct_device *counter_dev = counter->counter_dev; const unsigned channel = CR_CHAN(insn->chanspec); + unsigned cidx = counter->counter_index; unsigned load_reg; if (insn->n < 1) @@ -1705,24 +1661,18 @@ int ni_tio_winsn(struct ni_gpct *counter, struct comedi_insn *insn, /* Don't disturb load source select, just use whichever load register is already selected. */ load_reg = ni_tio_next_load_register(counter); write_register(counter, data[0], load_reg); - ni_tio_set_bits_transient(counter, - NITIO_Gi_Command_Reg(counter-> - counter_index), + ni_tio_set_bits_transient(counter, NITIO_CMD_REG(cidx), 0, 0, Gi_Load_Bit); /* restore state of load reg to whatever the user set last set it to */ write_register(counter, counter_dev->regs[load_reg], load_reg); break; case 1: - counter_dev->regs[NITIO_Gi_LoadA_Reg(counter->counter_index)] = - data[0]; - write_register(counter, data[0], - NITIO_Gi_LoadA_Reg(counter->counter_index)); + counter_dev->regs[NITIO_LOADA_REG(cidx)] = data[0]; + write_register(counter, data[0], NITIO_LOADA_REG(cidx)); break; case 2: - counter_dev->regs[NITIO_Gi_LoadB_Reg(counter->counter_index)] = - data[0]; - write_register(counter, data[0], - NITIO_Gi_LoadB_Reg(counter->counter_index)); + counter_dev->regs[NITIO_LOADB_REG(cidx)] = data[0]; + write_register(counter, data[0], NITIO_LOADB_REG(cidx)); break; default: return -EINVAL; @@ -1730,4 +1680,19 @@ int ni_tio_winsn(struct ni_gpct *counter, struct comedi_insn *insn, } return 0; } -EXPORT_SYMBOL_GPL(ni_tio_winsn); +EXPORT_SYMBOL_GPL(ni_tio_insn_write); + +static int __init ni_tio_init_module(void) +{ + return 0; +} +module_init(ni_tio_init_module); + +static void __exit ni_tio_cleanup_module(void) +{ +} +module_exit(ni_tio_cleanup_module); + +MODULE_AUTHOR("Comedi <comedi@comedi.org>"); +MODULE_DESCRIPTION("Comedi support for NI general-purpose counters"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/ni_tio.h b/drivers/staging/comedi/drivers/ni_tio.h index 7e13697b3254..68378dab4e70 100644 --- a/drivers/staging/comedi/drivers/ni_tio.h +++ b/drivers/staging/comedi/drivers/ni_tio.h @@ -25,77 +25,77 @@ struct mite_struct; struct ni_gpct_device; enum ni_gpct_register { - NITIO_G0_Autoincrement_Reg, - NITIO_G1_Autoincrement_Reg, - NITIO_G2_Autoincrement_Reg, - NITIO_G3_Autoincrement_Reg, - NITIO_G0_Command_Reg, - NITIO_G1_Command_Reg, - NITIO_G2_Command_Reg, - NITIO_G3_Command_Reg, - NITIO_G0_HW_Save_Reg, - NITIO_G1_HW_Save_Reg, - NITIO_G2_HW_Save_Reg, - NITIO_G3_HW_Save_Reg, - NITIO_G0_SW_Save_Reg, - NITIO_G1_SW_Save_Reg, - NITIO_G2_SW_Save_Reg, - NITIO_G3_SW_Save_Reg, - NITIO_G0_Mode_Reg, - NITIO_G1_Mode_Reg, - NITIO_G2_Mode_Reg, - NITIO_G3_Mode_Reg, - NITIO_G0_LoadA_Reg, - NITIO_G1_LoadA_Reg, - NITIO_G2_LoadA_Reg, - NITIO_G3_LoadA_Reg, - NITIO_G0_LoadB_Reg, - NITIO_G1_LoadB_Reg, - NITIO_G2_LoadB_Reg, - NITIO_G3_LoadB_Reg, - NITIO_G0_Input_Select_Reg, - NITIO_G1_Input_Select_Reg, - NITIO_G2_Input_Select_Reg, - NITIO_G3_Input_Select_Reg, - NITIO_G0_Counting_Mode_Reg, - NITIO_G1_Counting_Mode_Reg, - NITIO_G2_Counting_Mode_Reg, - NITIO_G3_Counting_Mode_Reg, - NITIO_G0_Second_Gate_Reg, - NITIO_G1_Second_Gate_Reg, - NITIO_G2_Second_Gate_Reg, - NITIO_G3_Second_Gate_Reg, - NITIO_G01_Status_Reg, - NITIO_G23_Status_Reg, - NITIO_G01_Joint_Reset_Reg, - NITIO_G23_Joint_Reset_Reg, - NITIO_G01_Joint_Status1_Reg, - NITIO_G23_Joint_Status1_Reg, - NITIO_G01_Joint_Status2_Reg, - NITIO_G23_Joint_Status2_Reg, - NITIO_G0_DMA_Config_Reg, - NITIO_G1_DMA_Config_Reg, - NITIO_G2_DMA_Config_Reg, - NITIO_G3_DMA_Config_Reg, - NITIO_G0_DMA_Status_Reg, - NITIO_G1_DMA_Status_Reg, - NITIO_G2_DMA_Status_Reg, - NITIO_G3_DMA_Status_Reg, - NITIO_G0_ABZ_Reg, - NITIO_G1_ABZ_Reg, - NITIO_G0_Interrupt_Acknowledge_Reg, - NITIO_G1_Interrupt_Acknowledge_Reg, - NITIO_G2_Interrupt_Acknowledge_Reg, - NITIO_G3_Interrupt_Acknowledge_Reg, - NITIO_G0_Status_Reg, - NITIO_G1_Status_Reg, - NITIO_G2_Status_Reg, - NITIO_G3_Status_Reg, - NITIO_G0_Interrupt_Enable_Reg, - NITIO_G1_Interrupt_Enable_Reg, - NITIO_G2_Interrupt_Enable_Reg, - NITIO_G3_Interrupt_Enable_Reg, - NITIO_Num_Registers, + NITIO_G0_AUTO_INC, + NITIO_G1_AUTO_INC, + NITIO_G2_AUTO_INC, + NITIO_G3_AUTO_INC, + NITIO_G0_CMD, + NITIO_G1_CMD, + NITIO_G2_CMD, + NITIO_G3_CMD, + NITIO_G0_HW_SAVE, + NITIO_G1_HW_SAVE, + NITIO_G2_HW_SAVE, + NITIO_G3_HW_SAVE, + NITIO_G0_SW_SAVE, + NITIO_G1_SW_SAVE, + NITIO_G2_SW_SAVE, + NITIO_G3_SW_SAVE, + NITIO_G0_MODE, + NITIO_G1_MODE, + NITIO_G2_MODE, + NITIO_G3_MODE, + NITIO_G0_LOADA, + NITIO_G1_LOADA, + NITIO_G2_LOADA, + NITIO_G3_LOADA, + NITIO_G0_LOADB, + NITIO_G1_LOADB, + NITIO_G2_LOADB, + NITIO_G3_LOADB, + NITIO_G0_INPUT_SEL, + NITIO_G1_INPUT_SEL, + NITIO_G2_INPUT_SEL, + NITIO_G3_INPUT_SEL, + NITIO_G0_CNT_MODE, + NITIO_G1_CNT_MODE, + NITIO_G2_CNT_MODE, + NITIO_G3_CNT_MODE, + NITIO_G0_GATE2, + NITIO_G1_GATE2, + NITIO_G2_GATE2, + NITIO_G3_GATE2, + NITIO_G01_STATUS, + NITIO_G23_STATUS, + NITIO_G01_RESET, + NITIO_G23_RESET, + NITIO_G01_STATUS1, + NITIO_G23_STATUS1, + NITIO_G01_STATUS2, + NITIO_G23_STATUS2, + NITIO_G0_DMA_CFG, + NITIO_G1_DMA_CFG, + NITIO_G2_DMA_CFG, + NITIO_G3_DMA_CFG, + NITIO_G0_DMA_STATUS, + NITIO_G1_DMA_STATUS, + NITIO_G2_DMA_STATUS, + NITIO_G3_DMA_STATUS, + NITIO_G0_ABZ, + NITIO_G1_ABZ, + NITIO_G0_INT_ACK, + NITIO_G1_INT_ACK, + NITIO_G2_INT_ACK, + NITIO_G3_INT_ACK, + NITIO_G0_STATUS, + NITIO_G1_STATUS, + NITIO_G2_STATUS, + NITIO_G3_STATUS, + NITIO_G0_INT_ENA, + NITIO_G1_INT_ENA, + NITIO_G2_INT_ENA, + NITIO_G3_INT_ENA, + NITIO_NUM_REGS, }; enum ni_gpct_variant { @@ -122,48 +122,35 @@ struct ni_gpct_device { enum ni_gpct_variant variant; struct ni_gpct *counters; unsigned num_counters; - unsigned regs[NITIO_Num_Registers]; + unsigned regs[NITIO_NUM_REGS]; spinlock_t regs_lock; }; -extern struct ni_gpct_device *ni_gpct_device_construct(struct comedi_device - *dev, - void (*write_register) - (struct ni_gpct * - counter, unsigned bits, - enum ni_gpct_register - reg), - unsigned (*read_register) - (struct ni_gpct * - counter, - enum ni_gpct_register - reg), - enum ni_gpct_variant - variant, - unsigned num_counters); -extern void ni_gpct_device_destroy(struct ni_gpct_device *counter_dev); -extern void ni_tio_init_counter(struct ni_gpct *counter); -extern int ni_tio_rinsn(struct ni_gpct *counter, - struct comedi_insn *insn, unsigned int *data); -extern int ni_tio_insn_config(struct ni_gpct *counter, - struct comedi_insn *insn, unsigned int *data); -extern int ni_tio_winsn(struct ni_gpct *counter, - struct comedi_insn *insn, unsigned int *data); -extern int ni_tio_cmd(struct ni_gpct *counter, struct comedi_async *async); -extern int ni_tio_cmdtest(struct ni_gpct *counter, struct comedi_cmd *cmd); -extern int ni_tio_cancel(struct ni_gpct *counter); -extern void ni_tio_handle_interrupt(struct ni_gpct *counter, - struct comedi_subdevice *s); -extern void ni_tio_set_mite_channel(struct ni_gpct *counter, - struct mite_channel *mite_chan); -extern void ni_tio_acknowledge_and_confirm(struct ni_gpct *counter, - int *gate_error, int *tc_error, - int *perm_stale_data, - int *stale_data); - -static inline struct ni_gpct *subdev_to_counter(struct comedi_subdevice *s) -{ - return s->private; -} +struct ni_gpct_device * +ni_gpct_device_construct(struct comedi_device *, + void (*write_register)(struct ni_gpct *, + unsigned bits, + enum ni_gpct_register), + unsigned (*read_register)(struct ni_gpct *, + enum ni_gpct_register), + enum ni_gpct_variant, + unsigned num_counters); +void ni_gpct_device_destroy(struct ni_gpct_device *); +void ni_tio_init_counter(struct ni_gpct *); +int ni_tio_insn_read(struct comedi_device *, struct comedi_subdevice *, + struct comedi_insn *, unsigned int *data); +int ni_tio_insn_config(struct comedi_device *, struct comedi_subdevice *, + struct comedi_insn *, unsigned int *data); +int ni_tio_insn_write(struct comedi_device *, struct comedi_subdevice *, + struct comedi_insn *, unsigned int *data); +int ni_tio_cmd(struct comedi_device *, struct comedi_subdevice *); +int ni_tio_cmdtest(struct comedi_device *, struct comedi_subdevice *, + struct comedi_cmd *); +int ni_tio_cancel(struct ni_gpct *); +void ni_tio_handle_interrupt(struct ni_gpct *, struct comedi_subdevice *); +void ni_tio_set_mite_channel(struct ni_gpct *, struct mite_channel *); +void ni_tio_acknowledge_and_confirm(struct ni_gpct *, + int *gate_error, int *tc_error, + int *perm_stale_data, int *stale_data); #endif /* _COMEDI_NI_TIO_H */ diff --git a/drivers/staging/comedi/drivers/ni_tio_internal.h b/drivers/staging/comedi/drivers/ni_tio_internal.h index b009876754a8..15b81b8fc5c4 100644 --- a/drivers/staging/comedi/drivers/ni_tio_internal.h +++ b/drivers/staging/comedi/drivers/ni_tio_internal.h @@ -21,409 +21,26 @@ #include "ni_tio.h" -static inline enum ni_gpct_register NITIO_Gi_Autoincrement_Reg(unsigned - counter_index) -{ - switch (counter_index) { - case 0: - return NITIO_G0_Autoincrement_Reg; - break; - case 1: - return NITIO_G1_Autoincrement_Reg; - break; - case 2: - return NITIO_G2_Autoincrement_Reg; - break; - case 3: - return NITIO_G3_Autoincrement_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gi_Command_Reg(unsigned counter_index) -{ - switch (counter_index) { - case 0: - return NITIO_G0_Command_Reg; - break; - case 1: - return NITIO_G1_Command_Reg; - break; - case 2: - return NITIO_G2_Command_Reg; - break; - case 3: - return NITIO_G3_Command_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gi_Counting_Mode_Reg(unsigned - counter_index) -{ - switch (counter_index) { - case 0: - return NITIO_G0_Counting_Mode_Reg; - break; - case 1: - return NITIO_G1_Counting_Mode_Reg; - break; - case 2: - return NITIO_G2_Counting_Mode_Reg; - break; - case 3: - return NITIO_G3_Counting_Mode_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gi_Input_Select_Reg(unsigned - counter_index) -{ - switch (counter_index) { - case 0: - return NITIO_G0_Input_Select_Reg; - break; - case 1: - return NITIO_G1_Input_Select_Reg; - break; - case 2: - return NITIO_G2_Input_Select_Reg; - break; - case 3: - return NITIO_G3_Input_Select_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gxx_Joint_Reset_Reg(unsigned - counter_index) -{ - switch (counter_index) { - case 0: - case 1: - return NITIO_G01_Joint_Reset_Reg; - break; - case 2: - case 3: - return NITIO_G23_Joint_Reset_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gxx_Joint_Status1_Reg(unsigned - counter_index) -{ - switch (counter_index) { - case 0: - case 1: - return NITIO_G01_Joint_Status1_Reg; - break; - case 2: - case 3: - return NITIO_G23_Joint_Status1_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gxx_Joint_Status2_Reg(unsigned - counter_index) -{ - switch (counter_index) { - case 0: - case 1: - return NITIO_G01_Joint_Status2_Reg; - break; - case 2: - case 3: - return NITIO_G23_Joint_Status2_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gxx_Status_Reg(unsigned counter_index) -{ - switch (counter_index) { - case 0: - case 1: - return NITIO_G01_Status_Reg; - break; - case 2: - case 3: - return NITIO_G23_Status_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gi_LoadA_Reg(unsigned counter_index) -{ - switch (counter_index) { - case 0: - return NITIO_G0_LoadA_Reg; - break; - case 1: - return NITIO_G1_LoadA_Reg; - break; - case 2: - return NITIO_G2_LoadA_Reg; - break; - case 3: - return NITIO_G3_LoadA_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gi_LoadB_Reg(unsigned counter_index) -{ - switch (counter_index) { - case 0: - return NITIO_G0_LoadB_Reg; - break; - case 1: - return NITIO_G1_LoadB_Reg; - break; - case 2: - return NITIO_G2_LoadB_Reg; - break; - case 3: - return NITIO_G3_LoadB_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gi_Mode_Reg(unsigned counter_index) -{ - switch (counter_index) { - case 0: - return NITIO_G0_Mode_Reg; - break; - case 1: - return NITIO_G1_Mode_Reg; - break; - case 2: - return NITIO_G2_Mode_Reg; - break; - case 3: - return NITIO_G3_Mode_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gi_SW_Save_Reg(int counter_index) -{ - switch (counter_index) { - case 0: - return NITIO_G0_SW_Save_Reg; - break; - case 1: - return NITIO_G1_SW_Save_Reg; - break; - case 2: - return NITIO_G2_SW_Save_Reg; - break; - case 3: - return NITIO_G3_SW_Save_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gi_Second_Gate_Reg(int counter_index) -{ - switch (counter_index) { - case 0: - return NITIO_G0_Second_Gate_Reg; - break; - case 1: - return NITIO_G1_Second_Gate_Reg; - break; - case 2: - return NITIO_G2_Second_Gate_Reg; - break; - case 3: - return NITIO_G3_Second_Gate_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gi_DMA_Config_Reg(int counter_index) -{ - switch (counter_index) { - case 0: - return NITIO_G0_DMA_Config_Reg; - break; - case 1: - return NITIO_G1_DMA_Config_Reg; - break; - case 2: - return NITIO_G2_DMA_Config_Reg; - break; - case 3: - return NITIO_G3_DMA_Config_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gi_DMA_Status_Reg(int counter_index) -{ - switch (counter_index) { - case 0: - return NITIO_G0_DMA_Status_Reg; - break; - case 1: - return NITIO_G1_DMA_Status_Reg; - break; - case 2: - return NITIO_G2_DMA_Status_Reg; - break; - case 3: - return NITIO_G3_DMA_Status_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gi_ABZ_Reg(int counter_index) -{ - switch (counter_index) { - case 0: - return NITIO_G0_ABZ_Reg; - break; - case 1: - return NITIO_G1_ABZ_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gi_Interrupt_Acknowledge_Reg( - int counter_index) -{ - switch (counter_index) { - case 0: - return NITIO_G0_Interrupt_Acknowledge_Reg; - break; - case 1: - return NITIO_G1_Interrupt_Acknowledge_Reg; - break; - case 2: - return NITIO_G2_Interrupt_Acknowledge_Reg; - break; - case 3: - return NITIO_G3_Interrupt_Acknowledge_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gi_Status_Reg(int counter_index) -{ - switch (counter_index) { - case 0: - return NITIO_G0_Status_Reg; - break; - case 1: - return NITIO_G1_Status_Reg; - break; - case 2: - return NITIO_G2_Status_Reg; - break; - case 3: - return NITIO_G3_Status_Reg; - break; - default: - BUG(); - break; - } - return 0; -} - -static inline enum ni_gpct_register NITIO_Gi_Interrupt_Enable_Reg( - int counter_index) -{ - switch (counter_index) { - case 0: - return NITIO_G0_Interrupt_Enable_Reg; - break; - case 1: - return NITIO_G1_Interrupt_Enable_Reg; - break; - case 2: - return NITIO_G2_Interrupt_Enable_Reg; - break; - case 3: - return NITIO_G3_Interrupt_Enable_Reg; - break; - default: - BUG(); - break; - } - return 0; -} +#define NITIO_AUTO_INC_REG(x) (NITIO_G0_AUTO_INC + (x)) +#define NITIO_CMD_REG(x) (NITIO_G0_CMD + (x)) +#define NITIO_HW_SAVE_REG(x) (NITIO_G0_HW_SAVE + (x)) +#define NITIO_SW_SAVE_REG(x) (NITIO_G0_SW_SAVE + (x)) +#define NITIO_MODE_REG(x) (NITIO_G0_MODE + (x)) +#define NITIO_LOADA_REG(x) (NITIO_G0_LOADA + (x)) +#define NITIO_LOADB_REG(x) (NITIO_G0_LOADB + (x)) +#define NITIO_INPUT_SEL_REG(x) (NITIO_G0_INPUT_SEL + (x)) +#define NITIO_CNT_MODE_REG(x) (NITIO_G0_CNT_MODE + (x)) +#define NITIO_GATE2_REG(x) (NITIO_G0_GATE2 + (x)) +#define NITIO_SHARED_STATUS_REG(x) (NITIO_G01_STATUS + ((x) / 2)) +#define NITIO_RESET_REG(x) (NITIO_G01_RESET + ((x) / 2)) +#define NITIO_STATUS1_REG(x) (NITIO_G01_STATUS1 + ((x) / 2)) +#define NITIO_STATUS2_REG(x) (NITIO_G01_STATUS2 + ((x) / 2)) +#define NITIO_DMA_CFG_REG(x) (NITIO_G0_DMA_CFG + (x)) +#define NITIO_DMA_STATUS_REG(x) (NITIO_G0_DMA_STATUS + (x)) +#define NITIO_ABZ_REG(x) (NITIO_G0_ABZ + (x)) +#define NITIO_INT_ACK_REG(x) (NITIO_G0_INT_ACK + (x)) +#define NITIO_STATUS_REG(x) (NITIO_G0_STATUS + (x)) +#define NITIO_INT_ENA_REG(x) (NITIO_G0_INT_ENA + (x)) enum Gi_Auto_Increment_Reg_Bits { Gi_Auto_Increment_Mask = 0xff @@ -699,14 +316,14 @@ static inline unsigned Gi_Gate_Interrupt_Enable_Bit(unsigned counter_index) static inline void write_register(struct ni_gpct *counter, unsigned bits, enum ni_gpct_register reg) { - BUG_ON(reg >= NITIO_Num_Registers); + BUG_ON(reg >= NITIO_NUM_REGS); counter->counter_dev->write_register(counter, bits, reg); } static inline unsigned read_register(struct ni_gpct *counter, enum ni_gpct_register reg) { - BUG_ON(reg >= NITIO_Num_Registers); + BUG_ON(reg >= NITIO_NUM_REGS); return counter->counter_dev->read_register(counter, reg); } @@ -738,7 +355,7 @@ static inline void ni_tio_set_bits_transient(struct ni_gpct *counter, struct ni_gpct_device *counter_dev = counter->counter_dev; unsigned long flags; - BUG_ON(register_index >= NITIO_Num_Registers); + BUG_ON(register_index >= NITIO_NUM_REGS); spin_lock_irqsave(&counter_dev->regs_lock, flags); counter_dev->regs[register_index] &= ~bit_mask; counter_dev->regs[register_index] |= (bit_values & bit_mask); @@ -773,7 +390,7 @@ static inline unsigned ni_tio_get_soft_copy(const struct ni_gpct *counter, unsigned long flags; unsigned value; - BUG_ON(register_index >= NITIO_Num_Registers); + BUG_ON(register_index >= NITIO_NUM_REGS); spin_lock_irqsave(&counter_dev->regs_lock, flags); value = counter_dev->regs[register_index]; spin_unlock_irqrestore(&counter_dev->regs_lock, flags); diff --git a/drivers/staging/comedi/drivers/ni_tiocmd.c b/drivers/staging/comedi/drivers/ni_tiocmd.c index 45691efefd05..7d64f8892f08 100644 --- a/drivers/staging/comedi/drivers/ni_tiocmd.c +++ b/drivers/staging/comedi/drivers/ni_tiocmd.c @@ -49,14 +49,11 @@ TODO: #include "ni_tio_internal.h" #include "mite.h" -MODULE_AUTHOR("Comedi <comedi@comedi.org>"); -MODULE_DESCRIPTION("Comedi command support for NI general-purpose counters"); -MODULE_LICENSE("GPL"); - static void ni_tio_configure_dma(struct ni_gpct *counter, short enable, short read_not_write) { struct ni_gpct_device *counter_dev = counter->counter_dev; + unsigned cidx = counter->counter_index; unsigned input_select_bits = 0; if (enable) { @@ -65,8 +62,7 @@ static void ni_tio_configure_dma(struct ni_gpct *counter, short enable, else input_select_bits |= Gi_Write_Acknowledges_Irq; } - ni_tio_set_bits(counter, - NITIO_Gi_Input_Select_Reg(counter->counter_index), + ni_tio_set_bits(counter, NITIO_INPUT_SEL_REG(cidx), Gi_Read_Acknowledges_Irq | Gi_Write_Acknowledges_Irq, input_select_bits); switch (counter_dev->variant) { @@ -83,9 +79,7 @@ static void ni_tio_configure_dma(struct ni_gpct *counter, short enable, } if (read_not_write == 0) gi_dma_config_bits |= Gi_DMA_Write_Bit; - ni_tio_set_bits(counter, - NITIO_Gi_DMA_Config_Reg(counter-> - counter_index), + ni_tio_set_bits(counter, NITIO_DMA_CFG_REG(cidx), Gi_DMA_Enable_Bit | Gi_DMA_Int_Bit | Gi_DMA_Write_Bit, gi_dma_config_bits); } @@ -122,6 +116,7 @@ static int ni_tio_input_inttrig(struct comedi_device *dev, static int ni_tio_input_cmd(struct ni_gpct *counter, struct comedi_async *async) { struct ni_gpct_device *counter_dev = counter->counter_dev; + unsigned cidx = counter->counter_index; struct comedi_cmd *cmd = &async->cmd; int retval = 0; @@ -140,8 +135,7 @@ static int ni_tio_input_cmd(struct ni_gpct *counter, struct comedi_async *async) BUG(); break; } - ni_tio_set_bits(counter, NITIO_Gi_Command_Reg(counter->counter_index), - Gi_Save_Trace_Bit, 0); + ni_tio_set_bits(counter, NITIO_CMD_REG(cidx), Gi_Save_Trace_Bit, 0); ni_tio_configure_dma(counter, 1, 1); switch (cmd->start_src) { case TRIG_NOW: @@ -185,6 +179,7 @@ static int ni_tio_output_cmd(struct ni_gpct *counter, static int ni_tio_cmd_setup(struct ni_gpct *counter, struct comedi_async *async) { struct comedi_cmd *cmd = &async->cmd; + unsigned cidx = counter->counter_index; int set_gate_source = 0; unsigned gate_source; int retval = 0; @@ -199,19 +194,17 @@ static int ni_tio_cmd_setup(struct ni_gpct *counter, struct comedi_async *async) if (set_gate_source) retval = ni_tio_set_gate_src(counter, 0, gate_source); if (cmd->flags & TRIG_WAKE_EOS) { - ni_tio_set_bits(counter, - NITIO_Gi_Interrupt_Enable_Reg(counter-> - counter_index), - Gi_Gate_Interrupt_Enable_Bit(counter-> - counter_index), - Gi_Gate_Interrupt_Enable_Bit(counter-> - counter_index)); + ni_tio_set_bits(counter, NITIO_INT_ENA_REG(cidx), + Gi_Gate_Interrupt_Enable_Bit(cidx), + Gi_Gate_Interrupt_Enable_Bit(cidx)); } return retval; } -int ni_tio_cmd(struct ni_gpct *counter, struct comedi_async *async) +int ni_tio_cmd(struct comedi_device *dev, struct comedi_subdevice *s) { + struct ni_gpct *counter = s->private; + struct comedi_async *async = s->async; struct comedi_cmd *cmd = &async->cmd; int retval = 0; unsigned long flags; @@ -237,8 +230,11 @@ int ni_tio_cmd(struct ni_gpct *counter, struct comedi_async *async) } EXPORT_SYMBOL_GPL(ni_tio_cmd); -int ni_tio_cmdtest(struct ni_gpct *counter, struct comedi_cmd *cmd) +int ni_tio_cmdtest(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_cmd *cmd) { + struct ni_gpct *counter = s->private; int err = 0; unsigned int sources; @@ -301,6 +297,7 @@ EXPORT_SYMBOL_GPL(ni_tio_cmdtest); int ni_tio_cancel(struct ni_gpct *counter) { + unsigned cidx = counter->counter_index; unsigned long flags; ni_tio_arm(counter, 0, 0); @@ -310,10 +307,8 @@ int ni_tio_cancel(struct ni_gpct *counter) spin_unlock_irqrestore(&counter->lock, flags); ni_tio_configure_dma(counter, 0, 0); - ni_tio_set_bits(counter, - NITIO_Gi_Interrupt_Enable_Reg(counter->counter_index), - Gi_Gate_Interrupt_Enable_Bit(counter->counter_index), - 0x0); + ni_tio_set_bits(counter, NITIO_INT_ENA_REG(cidx), + Gi_Gate_Interrupt_Enable_Bit(cidx), 0x0); return 0; } EXPORT_SYMBOL_GPL(ni_tio_cancel); @@ -353,14 +348,11 @@ void ni_tio_acknowledge_and_confirm(struct ni_gpct *counter, int *gate_error, int *tc_error, int *perm_stale_data, int *stale_data) { + unsigned cidx = counter->counter_index; const unsigned short gxx_status = read_register(counter, - NITIO_Gxx_Status_Reg - (counter-> - counter_index)); + NITIO_SHARED_STATUS_REG(cidx)); const unsigned short gi_status = read_register(counter, - NITIO_Gi_Status_Reg - (counter-> - counter_index)); + NITIO_STATUS_REG(cidx)); unsigned ack = 0; if (gate_error) @@ -372,8 +364,8 @@ void ni_tio_acknowledge_and_confirm(struct ni_gpct *counter, int *gate_error, if (stale_data) *stale_data = 0; - if (gxx_status & Gi_Gate_Error_Bit(counter->counter_index)) { - ack |= Gi_Gate_Error_Confirm_Bit(counter->counter_index); + if (gxx_status & Gi_Gate_Error_Bit(cidx)) { + ack |= Gi_Gate_Error_Confirm_Bit(cidx); if (gate_error) { /*660x don't support automatic acknowledgement of gate interrupt via dma read/write @@ -384,8 +376,8 @@ void ni_tio_acknowledge_and_confirm(struct ni_gpct *counter, int *gate_error, } } } - if (gxx_status & Gi_TC_Error_Bit(counter->counter_index)) { - ack |= Gi_TC_Error_Confirm_Bit(counter->counter_index); + if (gxx_status & Gi_TC_Error_Bit(cidx)) { + ack |= Gi_TC_Error_Confirm_Bit(cidx); if (tc_error) *tc_error = 1; } @@ -396,21 +388,15 @@ void ni_tio_acknowledge_and_confirm(struct ni_gpct *counter, int *gate_error, ack |= Gi_Gate_Interrupt_Ack_Bit; } if (ack) - write_register(counter, ack, - NITIO_Gi_Interrupt_Acknowledge_Reg - (counter->counter_index)); - if (ni_tio_get_soft_copy - (counter, - NITIO_Gi_Mode_Reg(counter->counter_index)) & + write_register(counter, ack, NITIO_INT_ACK_REG(cidx)); + if (ni_tio_get_soft_copy(counter, NITIO_MODE_REG(cidx)) & Gi_Loading_On_Gate_Bit) { - if (gxx_status & Gi_Stale_Data_Bit(counter->counter_index)) { + if (gxx_status & Gi_Stale_Data_Bit(cidx)) { if (stale_data) *stale_data = 1; } - if (read_register(counter, - NITIO_Gxx_Joint_Status2_Reg - (counter->counter_index)) & - Gi_Permanent_Stale_Bit(counter->counter_index)) { + if (read_register(counter, NITIO_STATUS2_REG(cidx)) & + Gi_Permanent_Stale_Bit(cidx)) { dev_info(counter->counter_dev->dev->class_dev, "%s: Gi_Permanent_Stale_Data detected.\n", __func__); @@ -424,6 +410,7 @@ EXPORT_SYMBOL_GPL(ni_tio_acknowledge_and_confirm); void ni_tio_handle_interrupt(struct ni_gpct *counter, struct comedi_subdevice *s) { + unsigned cidx = counter->counter_index; unsigned gpct_mite_status; unsigned long flags; int gate_error; @@ -442,9 +429,8 @@ void ni_tio_handle_interrupt(struct ni_gpct *counter, switch (counter->counter_dev->variant) { case ni_gpct_variant_m_series: case ni_gpct_variant_660x: - if (read_register(counter, - NITIO_Gi_DMA_Status_Reg - (counter->counter_index)) & Gi_DRQ_Error_Bit) { + if (read_register(counter, NITIO_DMA_STATUS_REG(cidx)) & + Gi_DRQ_Error_Bit) { dev_notice(counter->counter_dev->dev->class_dev, "%s: Gi_DRQ_Error detected.\n", __func__); s->async->events |= COMEDI_CB_OVERFLOW; @@ -484,11 +470,13 @@ static int __init ni_tiocmd_init_module(void) { return 0; } - module_init(ni_tiocmd_init_module); static void __exit ni_tiocmd_cleanup_module(void) { } - module_exit(ni_tiocmd_cleanup_module); + +MODULE_AUTHOR("Comedi <comedi@comedi.org>"); +MODULE_DESCRIPTION("Comedi command support for NI general-purpose counters"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/pcl812.c b/drivers/staging/comedi/drivers/pcl812.c index 03315abcca19..53613b385f35 100644 --- a/drivers/staging/comedi/drivers/pcl812.c +++ b/drivers/staging/comedi/drivers/pcl812.c @@ -162,156 +162,172 @@ #define MAX_CHANLIST_LEN 256 /* length of scan list */ -static const struct comedi_lrange range_pcl812pg_ai = { 5, { - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - BIP_RANGE(0.625), - BIP_RANGE(0.3125), - } +static const struct comedi_lrange range_pcl812pg_ai = { + 5, { + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625), + BIP_RANGE(0.3125) + } }; -static const struct comedi_lrange range_pcl812pg2_ai = { 5, { - BIP_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - BIP_RANGE(0.625), - } +static const struct comedi_lrange range_pcl812pg2_ai = { + 5, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625) + } }; -static const struct comedi_lrange range812_bipolar1_25 = { 1, { - BIP_RANGE(1.25), - } +static const struct comedi_lrange range812_bipolar1_25 = { + 1, { + BIP_RANGE(1.25) + } }; -static const struct comedi_lrange range812_bipolar0_625 = { 1, { - BIP_RANGE - (0.625), - } +static const struct comedi_lrange range812_bipolar0_625 = { + 1, { + BIP_RANGE(0.625) + } }; -static const struct comedi_lrange range812_bipolar0_3125 = { 1, { - BIP_RANGE - (0.3125), - } +static const struct comedi_lrange range812_bipolar0_3125 = { + 1, { + BIP_RANGE(0.3125) + } }; -static const struct comedi_lrange range_pcl813b_ai = { 4, { - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - BIP_RANGE(0.625), - } +static const struct comedi_lrange range_pcl813b_ai = { + 4, { + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625) + } }; -static const struct comedi_lrange range_pcl813b2_ai = { 4, { - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2.5), - UNI_RANGE(1.25), - } +static const struct comedi_lrange range_pcl813b2_ai = { + 4, { + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) + } }; -static const struct comedi_lrange range_iso813_1_ai = { 5, { - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - BIP_RANGE(0.625), - BIP_RANGE(0.3125), - } +static const struct comedi_lrange range_iso813_1_ai = { + 5, { + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625), + BIP_RANGE(0.3125) + } }; -static const struct comedi_lrange range_iso813_1_2_ai = { 5, { - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2.5), - UNI_RANGE(1.25), - UNI_RANGE(0.625), - } +static const struct comedi_lrange range_iso813_1_2_ai = { + 5, { + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25), + UNI_RANGE(0.625) + } }; -static const struct comedi_lrange range_iso813_2_ai = { 4, { - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - BIP_RANGE(0.625), - } +static const struct comedi_lrange range_iso813_2_ai = { + 4, { + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625) + } }; -static const struct comedi_lrange range_iso813_2_2_ai = { 4, { - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2.5), - UNI_RANGE(1.25), - } +static const struct comedi_lrange range_iso813_2_2_ai = { + 4, { + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) + } }; -static const struct comedi_lrange range_acl8113_1_ai = { 4, { - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - BIP_RANGE(0.625), - } +static const struct comedi_lrange range_acl8113_1_ai = { + 4, { + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625) + } }; -static const struct comedi_lrange range_acl8113_1_2_ai = { 4, { - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2.5), - UNI_RANGE(1.25), - } +static const struct comedi_lrange range_acl8113_1_2_ai = { + 4, { + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) + } }; -static const struct comedi_lrange range_acl8113_2_ai = { 3, { - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - } +static const struct comedi_lrange range_acl8113_2_ai = { + 3, { + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25) + } }; -static const struct comedi_lrange range_acl8113_2_2_ai = { 3, { - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2.5), - } +static const struct comedi_lrange range_acl8113_2_2_ai = { + 3, { + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5) + } }; -static const struct comedi_lrange range_acl8112dg_ai = { 9, { - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - BIP_RANGE(0.625), - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2.5), - UNI_RANGE(1.25), - BIP_RANGE(10), - } +static const struct comedi_lrange range_acl8112dg_ai = { + 9, { + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25), + BIP_RANGE(10) + } }; -static const struct comedi_lrange range_acl8112hg_ai = { 12, { - BIP_RANGE(5), - BIP_RANGE(0.5), - BIP_RANGE(0.05), - BIP_RANGE(0.005), - UNI_RANGE(10), - UNI_RANGE(1), - UNI_RANGE(0.1), - UNI_RANGE(0.01), - BIP_RANGE(10), - BIP_RANGE(1), - BIP_RANGE(0.1), - BIP_RANGE(0.01), - } +static const struct comedi_lrange range_acl8112hg_ai = { + 12, { + BIP_RANGE(5), + BIP_RANGE(0.5), + BIP_RANGE(0.05), + BIP_RANGE(0.005), + UNI_RANGE(10), + UNI_RANGE(1), + UNI_RANGE(0.1), + UNI_RANGE(0.01), + BIP_RANGE(10), + BIP_RANGE(1), + BIP_RANGE(0.1), + BIP_RANGE(0.01) + } }; -static const struct comedi_lrange range_a821pgh_ai = { 4, { - BIP_RANGE(5), - BIP_RANGE(0.5), - BIP_RANGE(0.05), - BIP_RANGE(0.005), - } +static const struct comedi_lrange range_a821pgh_ai = { + 4, { + BIP_RANGE(5), + BIP_RANGE(0.5), + BIP_RANGE(0.05), + BIP_RANGE(0.005) + } }; struct pcl812_board { @@ -404,9 +420,7 @@ static int pcl812_ai_insn_read(struct comedi_device *dev, goto conv_finish; udelay(1); } - printk - ("comedi%d: pcl812: (%s at 0x%lx) A/D insn read timeout\n", - dev->minor, dev->board_name, dev->iobase); + dev_dbg(dev->class_dev, "A/D insn read timeout\n"); outb(devpriv->mode_reg_int | 0, dev->iobase + PCL812_MODE); return -ETIME; @@ -441,9 +455,7 @@ static int acl8216_ai_insn_read(struct comedi_device *dev, goto conv_finish; udelay(1); } - printk - ("comedi%d: pcl812: (%s at 0x%lx) A/D insn read timeout\n", - dev->minor, dev->board_name, dev->iobase); + dev_dbg(dev->class_dev, "A/D insn read timeout\n"); outb(0, dev->iobase + PCL812_MODE); return -ETIME; @@ -759,7 +771,7 @@ static irqreturn_t interrupt_pcl812_ai_int(int irq, void *d) unsigned int mask, timeout; struct comedi_device *dev = d; struct pcl812_private *devpriv = dev->private; - struct comedi_subdevice *s = &dev->subdevices[0]; + struct comedi_subdevice *s = dev->read_subdev; unsigned int next_chan; s->async->events = 0; @@ -786,10 +798,7 @@ static irqreturn_t interrupt_pcl812_ai_int(int irq, void *d) } if (err) { - printk - ("comedi%d: pcl812: (%s at 0x%lx) " - "A/D cmd IRQ without DRDY!\n", - dev->minor, dev->board_name, dev->iobase); + dev_dbg(dev->class_dev, "A/D cmd IRQ without DRDY!\n"); pcl812_ai_cancel(dev, s); s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; comedi_event(dev, s); @@ -865,7 +874,7 @@ static irqreturn_t interrupt_pcl812_ai_dma(int irq, void *d) { struct comedi_device *dev = d; struct pcl812_private *devpriv = dev->private; - struct comedi_subdevice *s = &dev->subdevices[0]; + struct comedi_subdevice *s = dev->read_subdev; unsigned long dma_flags; int len, bufptr; unsigned short *ptr; @@ -1095,7 +1104,6 @@ static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it) const struct pcl812_board *board = comedi_board(dev); struct pcl812_private *devpriv; int ret, subdev; - unsigned int irq; unsigned int dma; unsigned long pages; struct comedi_subdevice *s; @@ -1109,31 +1117,13 @@ static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it) if (!devpriv) return -ENOMEM; - irq = 0; - if (board->IRQbits != 0) { /* board support IRQ */ - irq = it->options[1]; - if (irq) { /* we want to use IRQ */ - if (((1 << irq) & board->IRQbits) == 0) { - printk - (", IRQ %u is out of allowed range, " - "DISABLING IT", irq); - irq = 0; /* Bad IRQ */ - } else { - if (request_irq(irq, interrupt_pcl812, 0, - dev->board_name, dev)) { - printk - (", unable to allocate IRQ %u, " - "DISABLING IT", irq); - irq = 0; /* Can't use IRQ */ - } else { - printk(KERN_INFO ", irq=%u", irq); - } - } - } + if ((1 << it->options[1]) & board->IRQbits) { + ret = request_irq(it->options[1], interrupt_pcl812, 0, + dev->board_name, dev); + if (ret == 0) + dev->irq = it->options[1]; } - dev->irq = irq; - dma = 0; devpriv->dma = dma; if (!dev->irq) @@ -1141,21 +1131,22 @@ static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it) if (board->DMAbits != 0) { /* board support DMA */ dma = it->options[2]; if (((1 << dma) & board->DMAbits) == 0) { - printk(", DMA is out of allowed range, FAIL!\n"); + dev_err(dev->class_dev, + "DMA is out of allowed range, FAIL!\n"); return -EINVAL; /* Bad DMA */ } ret = request_dma(dma, dev->board_name); if (ret) { - printk(KERN_ERR ", unable to allocate DMA %u, FAIL!\n", - dma); + dev_err(dev->class_dev, + "unable to allocate DMA %u, FAIL!\n", dma); return -EBUSY; /* DMA isn't free */ } devpriv->dma = dma; - printk(KERN_INFO ", dma=%u", dma); pages = 1; /* we want 8KB */ devpriv->dmabuf[0] = __get_dma_pages(GFP_KERNEL, pages); if (!devpriv->dmabuf[0]) { - printk(", unable to allocate DMA buffer, FAIL!\n"); + dev_err(dev->class_dev, + "unable to allocate DMA buffer, FAIL!\n"); /* * maybe experiment with try_to_free_pages() * will help .... @@ -1167,7 +1158,8 @@ static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it) devpriv->hwdmasize[0] = PAGE_SIZE * (1 << pages); devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages); if (!devpriv->dmabuf[1]) { - printk(KERN_ERR ", unable to allocate DMA buffer, FAIL!\n"); + dev_err(dev->class_dev, + "unable to allocate DMA buffer, FAIL!\n"); return -EBUSY; } devpriv->dmapages[1] = pages; @@ -1225,7 +1217,6 @@ no_dma: break; } s->maxdata = board->ai_maxdata; - s->len_chanlist = MAX_CHANLIST_LEN; s->range_table = board->rangelist_ai; if (board->board_type == boardACL8216) s->insn_read = acl8216_ai_insn_read; @@ -1233,13 +1224,14 @@ no_dma: s->insn_read = pcl812_ai_insn_read; devpriv->use_MPC = board->haveMPC508; - s->cancel = pcl812_ai_cancel; if (dev->irq) { dev->read_subdev = s; s->subdev_flags |= SDF_CMD_READ; + s->len_chanlist = MAX_CHANLIST_LEN; s->do_cmdtest = pcl812_ai_cmdtest; s->do_cmd = pcl812_ai_cmd; s->poll = pcl812_ai_poll; + s->cancel = pcl812_ai_cancel; } switch (board->board_type) { case boardPCL812PG: @@ -1269,10 +1261,6 @@ no_dma: default: s->range_table = &range_bipolar10; break; - printk - (", incorrect range number %d, changing " - "to 0 (+/-10V)", it->options[4]); - break; } break; break; @@ -1299,10 +1287,6 @@ no_dma: default: s->range_table = &range_iso813_1_ai; break; - printk - (", incorrect range number %d, " - "changing to 0 ", it->options[1]); - break; } break; case boardACL8113: @@ -1324,10 +1308,6 @@ no_dma: default: s->range_table = &range_acl8113_1_ai; break; - printk - (", incorrect range number %d, " - "changing to 0 ", it->options[1]); - break; } break; } @@ -1341,7 +1321,6 @@ no_dma: s->subdev_flags = SDF_WRITABLE | SDF_GROUND; s->n_chan = board->n_aochan; s->maxdata = 0xfff; - s->len_chanlist = 1; s->range_table = board->rangelist_ao; s->insn_read = pcl812_ao_insn_read; s->insn_write = pcl812_ao_insn_write; @@ -1370,7 +1349,6 @@ no_dma: s->subdev_flags = SDF_READABLE; s->n_chan = board->n_dichan; s->maxdata = 1; - s->len_chanlist = board->n_dichan; s->range_table = &range_digital; s->insn_bits = pcl812_di_insn_bits; subdev++; @@ -1383,7 +1361,6 @@ no_dma: s->subdev_flags = SDF_WRITABLE; s->n_chan = board->n_dochan; s->maxdata = 1; - s->len_chanlist = board->n_dochan; s->range_table = &range_digital; s->insn_bits = pcl812_do_insn_bits; subdev++; @@ -1402,7 +1379,7 @@ no_dma: break; case boardA821: devpriv->max_812_ai_mode0_rangewait = 1; - devpriv->mode_reg_int = (irq << 4) & 0xf0; + devpriv->mode_reg_int = (dev->irq << 4) & 0xf0; break; case boardPCL813B: case boardPCL813: @@ -1413,7 +1390,6 @@ no_dma: break; } - printk(KERN_INFO "\n"); devpriv->valid = 1; pcl812_reset(dev); diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c index ab9d2bd26a20..e9d470459933 100644 --- a/drivers/staging/comedi/drivers/pcl816.c +++ b/drivers/staging/comedi/drivers/pcl816.c @@ -44,14 +44,10 @@ Configuration Options: #include "comedi_fc.h" #include "8253.h" -#define DEBUG(x) x - /* boards constants */ /* IO space len */ #define PCLx1x_RANGE 16 -/* #define outb(x,y) printk("OUTB(%x, 200+%d)\n", x,y-0x200); outb(x,y) */ - /* INTEL 8254 counters */ #define PCL816_CTR0 4 #define PCL816_CTR1 5 @@ -85,16 +81,17 @@ Configuration Options: #define MAGIC_DMA_WORD 0x5a5a -static const struct comedi_lrange range_pcl816 = { 8, { - BIP_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2.5), - UNI_RANGE(1.25), - } +static const struct comedi_lrange range_pcl816 = { + 8, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) + } }; struct pcl816_board { @@ -132,7 +129,6 @@ struct pcl816_private { unsigned int ai_scans; /* len of scanlist */ unsigned char ai_neverending; /* if=1, then we do neverending record (you must use cancel()) */ - int irq_free; /* 1=have allocated IRQ */ int irq_blocked; /* 1=IRQ now uses any subdev */ int irq_was_now_closed; /* when IRQ finish, there's stored int816_mode for last interrupt */ int int816_mode; /* who now uses IRQ - 1=AI1 int, 2=AI1 dma, 3=AI3 int, 4AI3 dma */ @@ -143,7 +139,6 @@ struct pcl816_private { unsigned int ai_act_chanlist_pos; /* actual position in MUX list */ unsigned int ai_n_chan; /* how many channels per scan */ unsigned int ai_poll_ptr; /* how many sampes transfer poll */ - struct comedi_subdevice *sub_ai; /* ptr to AI subdevice */ }; /* @@ -176,7 +171,6 @@ static int pcl816_ai_insn_read(struct comedi_device *dev, int n; int timeout; - DPRINTK("mode 0 analog input\n"); /* software trigger, DMA and INT off */ outb(0, dev->iobase + PCL816_CONTROL); /* clear INT (conversion end) flag */ @@ -228,7 +222,7 @@ static irqreturn_t interrupt_pcl816_ai_mode13_int(int irq, void *d) { struct comedi_device *dev = d; struct pcl816_private *devpriv = dev->private; - struct comedi_subdevice *s = &dev->subdevices[0]; + struct comedi_subdevice *s = dev->read_subdev; unsigned char low, hi; int timeout = 50; /* wait max 50us */ @@ -322,7 +316,7 @@ static irqreturn_t interrupt_pcl816_ai_mode13_dma(int irq, void *d) { struct comedi_device *dev = d; struct pcl816_private *devpriv = dev->private; - struct comedi_subdevice *s = &dev->subdevices[0]; + struct comedi_subdevice *s = dev->read_subdev; int len, bufptr, this_dma_buf; unsigned long dma_flags; unsigned short *ptr; @@ -372,8 +366,6 @@ static irqreturn_t interrupt_pcl816(int irq, void *d) struct comedi_device *dev = d; struct pcl816_private *devpriv = dev->private; - DPRINTK("<I>"); - if (!dev->attached) { comedi_error(dev, "premature interrupt"); return IRQ_HANDLED; @@ -389,8 +381,7 @@ static irqreturn_t interrupt_pcl816(int irq, void *d) } outb(0, dev->iobase + PCL816_CLRINT); /* clear INT request */ - if (!dev->irq || !devpriv->irq_free || !devpriv->irq_blocked || - !devpriv->int816_mode) { + if (!dev->irq || !devpriv->irq_blocked || !devpriv->int816_mode) { if (devpriv->irq_was_now_closed) { devpriv->irq_was_now_closed = 0; /* comedi_error(dev,"last IRQ.."); */ @@ -405,22 +396,6 @@ static irqreturn_t interrupt_pcl816(int irq, void *d) /* ============================================================================== - COMMAND MODE -*/ -static void pcl816_cmdtest_out(int e, struct comedi_cmd *cmd) -{ - printk(KERN_INFO "pcl816 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e, - cmd->start_src, cmd->scan_begin_src, cmd->convert_src); - printk(KERN_INFO "pcl816 e=%d startarg=%d scanarg=%d convarg=%d\n", e, - cmd->start_arg, cmd->scan_begin_arg, cmd->convert_arg); - printk(KERN_INFO "pcl816 e=%d stopsrc=%x scanend=%x\n", e, - cmd->stop_src, cmd->scan_end_src); - printk(KERN_INFO "pcl816 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n", - e, cmd->stop_arg, cmd->scan_end_arg, cmd->chanlist_len); -} - -/* -============================================================================== */ static int pcl816_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_cmd *cmd) @@ -429,10 +404,6 @@ static int pcl816_ai_cmdtest(struct comedi_device *dev, int err = 0; int tmp, divisor1 = 0, divisor2 = 0; - DEBUG(printk(KERN_INFO "pcl816 pcl812_ai_cmdtest\n"); - pcl816_cmdtest_out(-1, cmd); - ); - /* Step 1 : check if triggers are trivially valid */ err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW); @@ -566,15 +537,6 @@ static int pcl816_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) devpriv->ai_neverending = 1; } - /* don't we want wake up every scan? */ - if ((cmd->flags & TRIG_WAKE_EOS)) { - printk(KERN_INFO - "pl816: You wankt WAKE_EOS but I dont want handle it"); - /* devpriv->ai_eos=1; */ - /* if (devpriv->ai_n_chan==1) */ - /* devpriv->dma=0; // DMA is useless for this situation */ - } - if (devpriv->dma) { bytes = devpriv->hwdmasize[0]; if (!devpriv->ai_neverending) { @@ -630,7 +592,6 @@ static int pcl816_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) break; } - DPRINTK("pcl816 END: pcl812_ai_cmd()\n"); return 0; } @@ -685,8 +646,6 @@ static int pcl816_ai_cancel(struct comedi_device *dev, { struct pcl816_private *devpriv = dev->private; -/* DEBUG(printk("pcl816_ai_cancel()\n");) */ - if (devpriv->irq_blocked > 0) { switch (devpriv->int816_mode) { case INT_TYPE_AI1_DMA: @@ -719,9 +678,7 @@ static int pcl816_ai_cancel(struct comedi_device *dev, break; } } - - DEBUG(printk("comedi: pcl816_ai_cancel() successful\n");) - return 0; + return 0; } /* @@ -788,8 +745,8 @@ start_pacer(struct comedi_device *dev, int mode, unsigned int divisor1, udelay(1); if (mode == 1) { - DPRINTK("mode %d, divisor1 %d, divisor2 %d\n", mode, divisor1, - divisor2); + dev_dbg(dev->class_dev, "mode %d, divisor1 %d, divisor2 %d\n", + mode, divisor1, divisor2); outb(divisor2 & 0xff, dev->iobase + PCL816_CTR2); outb((divisor2 >> 8) & 0xff, dev->iobase + PCL816_CTR2); outb(divisor1 & 0xff, dev->iobase + PCL816_CTR1); @@ -823,11 +780,6 @@ check_channel_list(struct comedi_device *dev, /* first channel is every time ok */ chansegment[0] = chanlist[0]; for (i = 1, seglen = 1; i < chanlen; i++, seglen++) { - /* build part of chanlist */ - DEBUG(printk(KERN_INFO "%d. %d %d\n", i, - CR_CHAN(chanlist[i]), - CR_RANGE(chanlist[i]));) - /* we detect loop, this must by finish */ if (chanlist[0] == chanlist[i]) break; @@ -835,12 +787,10 @@ check_channel_list(struct comedi_device *dev, (CR_CHAN(chansegment[i - 1]) + 1) % chanlen; if (nowmustbechan != CR_CHAN(chanlist[i])) { /* channel list isn't continuous :-( */ - printk(KERN_WARNING - "comedi%d: pcl816: channel list must " - "be continuous! chanlist[%i]=%d but " - "must be %d or %d!\n", dev->minor, - i, CR_CHAN(chanlist[i]), nowmustbechan, - CR_CHAN(chanlist[0])); + dev_dbg(dev->class_dev, + "channel list must be continuous! chanlist[%i]=%d but must be %d or %d!\n", + i, CR_CHAN(chanlist[i]), nowmustbechan, + CR_CHAN(chanlist[0])); return 0; } /* well, this is next correct channel in list */ @@ -849,22 +799,15 @@ check_channel_list(struct comedi_device *dev, /* check whole chanlist */ for (i = 0, segpos = 0; i < chanlen; i++) { - DEBUG(printk("%d %d=%d %d\n", - CR_CHAN(chansegment[i % seglen]), - CR_RANGE(chansegment[i % seglen]), - CR_CHAN(chanlist[i]), - CR_RANGE(chanlist[i]));) if (chanlist[i] != chansegment[i % seglen]) { - printk(KERN_WARNING - "comedi%d: pcl816: bad channel or range" - " number! chanlist[%i]=%d,%d,%d and not" - " %d,%d,%d!\n", dev->minor, i, - CR_CHAN(chansegment[i]), - CR_RANGE(chansegment[i]), - CR_AREF(chansegment[i]), - CR_CHAN(chanlist[i % seglen]), - CR_RANGE(chanlist[i % seglen]), - CR_AREF(chansegment[i % seglen])); + dev_dbg(dev->class_dev, + "bad channel or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n", + i, CR_CHAN(chansegment[i]), + CR_RANGE(chansegment[i]), + CR_AREF(chansegment[i]), + CR_CHAN(chanlist[i % seglen]), + CR_RANGE(chanlist[i % seglen]), + CR_AREF(chansegment[i % seglen])); return 0; /* chan/gain list is strange */ } } @@ -909,7 +852,7 @@ static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it) const struct pcl816_board *board = comedi_board(dev); struct pcl816_private *devpriv; int ret; - unsigned int irq, dma; + unsigned int dma; unsigned long pages; /* int i; */ struct comedi_subdevice *s; @@ -919,7 +862,7 @@ static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it) return ret; if (pcl816_check(dev->iobase)) { - printk(KERN_ERR ", I cann't detect board. FAIL!\n"); + dev_err(dev->class_dev, "I can't detect board. FAIL!\n"); return -EIO; } @@ -927,43 +870,20 @@ static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it) if (!devpriv) return -ENOMEM; - /* grab our IRQ */ - irq = 0; - if (board->IRQbits != 0) { /* board support IRQ */ - irq = it->options[1]; - if (irq) { /* we want to use IRQ */ - if (((1 << irq) & board->IRQbits) == 0) { - printk - (", IRQ %u is out of allowed range, " - "DISABLING IT", irq); - irq = 0; /* Bad IRQ */ - } else { - if (request_irq(irq, interrupt_pcl816, 0, - dev->board_name, dev)) { - printk - (", unable to allocate IRQ %u, " - "DISABLING IT", irq); - irq = 0; /* Can't use IRQ */ - } else { - printk(KERN_INFO ", irq=%u", irq); - } - } - } + if ((1 << it->options[1]) & board->IRQbits) { + ret = request_irq(it->options[1], interrupt_pcl816, 0, + dev->board_name, dev); + if (ret == 0) + dev->irq = it->options[1]; } - dev->irq = irq; - if (irq) /* 1=we have allocated irq */ - devpriv->irq_free = 1; - else - devpriv->irq_free = 0; - devpriv->irq_blocked = 0; /* number of subdevice which use IRQ */ devpriv->int816_mode = 0; /* mode of irq */ /* grab our DMA */ dma = 0; devpriv->dma = dma; - if (!devpriv->irq_free) + if (!dev->irq) goto no_dma; /* if we haven't IRQ, we can't use DMA */ if (board->DMAbits != 0) { /* board support DMA */ @@ -972,23 +892,24 @@ static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it) goto no_dma; /* DMA disabled */ if (((1 << dma) & board->DMAbits) == 0) { - printk(", DMA is out of allowed range, FAIL!\n"); + dev_err(dev->class_dev, + "DMA is out of allowed range, FAIL!\n"); return -EINVAL; /* Bad DMA */ } ret = request_dma(dma, dev->board_name); if (ret) { - printk(KERN_ERR - ", unable to allocate DMA %u, FAIL!\n", dma); + dev_err(dev->class_dev, + "unable to allocate DMA %u, FAIL!\n", dma); return -EBUSY; /* DMA isn't free */ } devpriv->dma = dma; - printk(KERN_INFO ", dma=%u", dma); pages = 2; /* we need 16KB */ devpriv->dmabuf[0] = __get_dma_pages(GFP_KERNEL, pages); if (!devpriv->dmabuf[0]) { - printk(", unable to allocate DMA buffer, FAIL!\n"); + dev_err(dev->class_dev, + "unable to allocate DMA buffer, FAIL!\n"); /* * maybe experiment with try_to_free_pages() * will help .... @@ -998,13 +919,11 @@ static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it) devpriv->dmapages[0] = pages; devpriv->hwdmaptr[0] = virt_to_bus((void *)devpriv->dmabuf[0]); devpriv->hwdmasize[0] = (1 << pages) * PAGE_SIZE; - /* printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE); */ devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages); if (!devpriv->dmabuf[1]) { - printk(KERN_ERR - ", unable to allocate DMA buffer, " - "FAIL!\n"); + dev_err(dev->class_dev, + "unable to allocate DMA buffer, FAIL!\n"); return -EBUSY; } devpriv->dmapages[1] = pages; @@ -1029,20 +948,20 @@ no_dma: s = &dev->subdevices[0]; if (board->n_aichan > 0) { s->type = COMEDI_SUBD_AI; - devpriv->sub_ai = s; - dev->read_subdev = s; - s->subdev_flags = SDF_READABLE | SDF_CMD_READ; + s->subdev_flags = SDF_CMD_READ | SDF_DIFF; s->n_chan = board->n_aichan; - s->subdev_flags |= SDF_DIFF; - /* printk (", %dchans DIFF DAC - %d", s->n_chan, i); */ s->maxdata = board->ai_maxdata; - s->len_chanlist = board->ai_chanlist; s->range_table = board->ai_range_type; - s->cancel = pcl816_ai_cancel; - s->do_cmdtest = pcl816_ai_cmdtest; - s->do_cmd = pcl816_ai_cmd; - s->poll = pcl816_ai_poll; s->insn_read = pcl816_ai_insn_read; + if (dev->irq) { + dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; + s->len_chanlist = board->ai_chanlist; + s->do_cmdtest = pcl816_ai_cmdtest; + s->do_cmd = pcl816_ai_cmd; + s->poll = pcl816_ai_poll; + s->cancel = pcl816_ai_cancel; + } } else { s->type = COMEDI_SUBD_UNUSED; } @@ -1075,8 +994,6 @@ case COMEDI_SUBD_DO: pcl816_reset(dev); - printk("\n"); - return 0; } @@ -1085,7 +1002,7 @@ static void pcl816_detach(struct comedi_device *dev) struct pcl816_private *devpriv = dev->private; if (dev->private) { - pcl816_ai_cancel(dev, devpriv->sub_ai); + pcl816_ai_cancel(dev, dev->read_subdev); pcl816_reset(dev); if (devpriv->dma) free_dma(devpriv->dma); diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c index 9e4d7e860509..fa1758ad49d5 100644 --- a/drivers/staging/comedi/drivers/pcl818.c +++ b/drivers/staging/comedi/drivers/pcl818.c @@ -188,56 +188,78 @@ A word or two about DMA. Driver support DMA operations at two ways: #define MAGIC_DMA_WORD 0x5a5a -static const struct comedi_lrange range_pcl818h_ai = { 9, { - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - BIP_RANGE(0.625), - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2.5), - UNI_RANGE(1.25), - BIP_RANGE(10), - } +static const struct comedi_lrange range_pcl818h_ai = { + 9, { + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25), + BIP_RANGE(10) + } }; -static const struct comedi_lrange range_pcl818hg_ai = { 10, { - BIP_RANGE(5), - BIP_RANGE(0.5), - BIP_RANGE(0.05), - BIP_RANGE(0.005), - UNI_RANGE(10), - UNI_RANGE(1), - UNI_RANGE(0.1), - UNI_RANGE(0.01), - BIP_RANGE(10), - BIP_RANGE(1), - BIP_RANGE(0.1), - BIP_RANGE(0.01), - } +static const struct comedi_lrange range_pcl818hg_ai = { + 10, { + BIP_RANGE(5), + BIP_RANGE(0.5), + BIP_RANGE(0.05), + BIP_RANGE(0.005), + UNI_RANGE(10), + UNI_RANGE(1), + UNI_RANGE(0.1), + UNI_RANGE(0.01), + BIP_RANGE(10), + BIP_RANGE(1), + BIP_RANGE(0.1), + BIP_RANGE(0.01) + } }; -static const struct comedi_lrange range_pcl818l_l_ai = { 4, { - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - BIP_RANGE(0.625), - } +static const struct comedi_lrange range_pcl818l_l_ai = { + 4, { + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625) + } }; -static const struct comedi_lrange range_pcl818l_h_ai = { 4, { - BIP_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - } +static const struct comedi_lrange range_pcl818l_h_ai = { + 4, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25) + } +}; + +static const struct comedi_lrange range718_bipolar1 = { + 1, { + BIP_RANGE(1) + } }; -static const struct comedi_lrange range718_bipolar1 = { 1, {BIP_RANGE(1),} }; static const struct comedi_lrange range718_bipolar0_5 = { - 1, {BIP_RANGE(0.5),} }; -static const struct comedi_lrange range718_unipolar2 = { 1, {UNI_RANGE(2),} }; -static const struct comedi_lrange range718_unipolar1 = { 1, {BIP_RANGE(1),} }; + 1, { + BIP_RANGE(0.5) + } +}; + +static const struct comedi_lrange range718_unipolar2 = { + 1, { + UNI_RANGE(2) + } +}; + +static const struct comedi_lrange range718_unipolar1 = { + 1, { + BIP_RANGE(1) + } +}; struct pcl818_board { @@ -274,7 +296,6 @@ struct pcl818_private { unsigned char neverending_ai; /* if=1, then we do neverending record (you must use cancel()) */ unsigned int ns_min; /* manimal allowed delay between samples (in us) for actual card */ int i8253_osc_base; /* 1/frequency of on board oscilator in ns */ - int irq_free; /* 1=have allocated IRQ */ int irq_blocked; /* 1=IRQ now uses any subdev */ int irq_was_now_closed; /* when IRQ finish, there's stored int818_mode for last interrupt */ int ai_mode; /* who now uses IRQ - 1=AI1 int, 2=AI1 dma, 3=AI3 int, 4AI3 dma */ @@ -291,7 +312,6 @@ struct pcl818_private { unsigned int ai_data_len; /* len of data buffer */ unsigned int ai_timer1; /* timers */ unsigned int ai_timer2; - struct comedi_subdevice *sub_ai; /* ptr to AI subdevice */ unsigned char usefifo; /* 1=use fifo */ unsigned int ao_readback[2]; }; @@ -441,7 +461,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_int(int irq, void *d) { struct comedi_device *dev = d; struct pcl818_private *devpriv = dev->private; - struct comedi_subdevice *s = &dev->subdevices[0]; + struct comedi_subdevice *s = dev->read_subdev; unsigned char low; int timeout = 50; /* wait max 50us */ @@ -463,10 +483,10 @@ conv_finish: outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */ if ((low & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */ - printk - ("comedi: A/D mode1/3 IRQ - channel dropout %x!=%x !\n", - (low & 0xf), - devpriv->act_chanlist[devpriv->act_chanlist_pos]); + dev_dbg(dev->class_dev, + "A/D mode1/3 IRQ - channel dropout %x!=%x !\n", + (low & 0xf), + devpriv->act_chanlist[devpriv->act_chanlist_pos]); pcl818_ai_cancel(dev, s); s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; comedi_event(dev, s); @@ -478,7 +498,6 @@ conv_finish: s->async->cur_chan++; if (s->async->cur_chan >= devpriv->ai_n_chan) { - /* printk("E"); */ s->async->cur_chan = 0; devpriv->ai_act_scan--; } @@ -501,7 +520,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d) { struct comedi_device *dev = d; struct pcl818_private *devpriv = dev->private; - struct comedi_subdevice *s = &dev->subdevices[0]; + struct comedi_subdevice *s = dev->read_subdev; int i, len, bufptr; unsigned long flags; unsigned short *ptr; @@ -523,7 +542,6 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d) release_dma_lock(flags); enable_dma(devpriv->dma); } - printk("comedi: A/D mode1/3 IRQ \n"); devpriv->dma_runs_to_end--; outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */ @@ -534,11 +552,11 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d) for (i = 0; i < len; i++) { if ((ptr[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */ - printk - ("comedi: A/D mode1/3 DMA - channel dropout %d(card)!=%d(chanlist) at %d !\n", - (ptr[bufptr] & 0xf), - devpriv->act_chanlist[devpriv->act_chanlist_pos], - devpriv->act_chanlist_pos); + dev_dbg(dev->class_dev, + "A/D mode1/3 DMA - channel dropout %d(card)!=%d(chanlist) at %d !\n", + (ptr[bufptr] & 0xf), + devpriv->act_chanlist[devpriv->act_chanlist_pos], + devpriv->act_chanlist_pos); pcl818_ai_cancel(dev, s); s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; comedi_event(dev, s); @@ -562,7 +580,6 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d) pcl818_ai_cancel(dev, s); s->async->events |= COMEDI_CB_EOA; comedi_event(dev, s); - /* printk("done int ai13 dma\n"); */ return IRQ_HANDLED; } } @@ -580,7 +597,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d) { struct comedi_device *dev = d; struct pcl818_private *devpriv = dev->private; - struct comedi_subdevice *s = &dev->subdevices[0]; + struct comedi_subdevice *s = dev->read_subdev; int i, len; unsigned char lo; @@ -612,10 +629,10 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d) for (i = 0; i < len; i++) { lo = inb(dev->iobase + PCL818_FI_DATALO); if ((lo & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */ - printk - ("comedi: A/D mode1/3 FIFO - channel dropout %d!=%d !\n", - (lo & 0xf), - devpriv->act_chanlist[devpriv->act_chanlist_pos]); + dev_dbg(dev->class_dev, + "A/D mode1/3 FIFO - channel dropout %d!=%d !\n", + (lo & 0xf), + devpriv->act_chanlist[devpriv->act_chanlist_pos]); pcl818_ai_cancel(dev, s); s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; comedi_event(dev, s); @@ -661,7 +678,6 @@ static irqreturn_t interrupt_pcl818(int irq, void *d) comedi_error(dev, "premature interrupt"); return IRQ_HANDLED; } - /* printk("I\n"); */ if (devpriv->irq_blocked && devpriv->irq_was_now_closed) { if ((devpriv->neverending_ai || (!devpriv->neverending_ai && @@ -673,10 +689,9 @@ static irqreturn_t interrupt_pcl818(int irq, void *d) being reprogrammed while a DMA transfer is in progress. */ - struct comedi_subdevice *s = &dev->subdevices[0]; devpriv->ai_act_scan = 0; devpriv->neverending_ai = 0; - pcl818_ai_cancel(dev, s); + pcl818_ai_cancel(dev, dev->read_subdev); } outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */ @@ -705,8 +720,7 @@ static irqreturn_t interrupt_pcl818(int irq, void *d) outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */ - if ((!dev->irq) || (!devpriv->irq_free) || (!devpriv->irq_blocked) - || (!devpriv->ai_mode)) { + if (!devpriv->irq_blocked || !devpriv->ai_mode) { comedi_error(dev, "bad IRQ!"); return IRQ_NONE; } @@ -726,7 +740,6 @@ static void pcl818_ai_mode13dma_int(int mode, struct comedi_device *dev, unsigned int flags; unsigned int bytes; - printk("mode13dma_int, mode: %d\n", mode); disable_dma(devpriv->dma); /* disable dma */ bytes = devpriv->hwdmasize[0]; if (!devpriv->neverending_ai) { @@ -753,7 +766,7 @@ static void pcl818_ai_mode13dma_int(int mode, struct comedi_device *dev, } else { devpriv->ai_mode = INT_TYPE_AI3_DMA; outb(0x86 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Ext trig+IRQ+DMA */ - }; + } } /* @@ -768,12 +781,6 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device *dev, int divisor1 = 0, divisor2 = 0; unsigned int seglen; - dev_dbg(dev->class_dev, "pcl818_ai_cmd_mode()\n"); - if (!dev->irq) { - comedi_error(dev, "IRQ not defined!"); - return -EINVAL; - } - if (devpriv->irq_blocked) return -EBUSY; @@ -824,7 +831,6 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device *dev, case 0: if (!devpriv->usefifo) { /* IRQ */ - /* printk("IRQ\n"); */ if (mode == 1) { devpriv->ai_mode = INT_TYPE_AI1_INT; /* Pacer+IRQ */ @@ -853,7 +859,6 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device *dev, start_pacer(dev, mode, divisor1, divisor2); - dev_dbg(dev->class_dev, "pcl818_ai_cmd_mode() end\n"); return 0; } @@ -899,10 +904,6 @@ static int check_channel_list(struct comedi_device *dev, chansegment[0] = chanlist[0]; /* build part of chanlist */ for (i = 1, seglen = 1; i < n_chan; i++, seglen++) { - - /* printk("%d. %d * %d\n",i, - * CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i]));*/ - /* we detect loop, this must by finish */ if (chanlist[0] == chanlist[i]) @@ -910,10 +911,10 @@ static int check_channel_list(struct comedi_device *dev, nowmustbechan = (CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan; if (nowmustbechan != CR_CHAN(chanlist[i])) { /* channel list isn't continuous :-( */ - printk - ("comedi%d: pcl818: channel list must be continuous! chanlist[%i]=%d but must be %d or %d!\n", - dev->minor, i, CR_CHAN(chanlist[i]), - nowmustbechan, CR_CHAN(chanlist[0])); + dev_dbg(dev->class_dev, + "channel list must be continuous! chanlist[%i]=%d but must be %d or %d!\n", + i, CR_CHAN(chanlist[i]), nowmustbechan, + CR_CHAN(chanlist[0])); return 0; } /* well, this is next correct channel in list */ @@ -922,23 +923,21 @@ static int check_channel_list(struct comedi_device *dev, /* check whole chanlist */ for (i = 0, segpos = 0; i < n_chan; i++) { - /* printk("%d %d=%d %d\n",CR_CHAN(chansegment[i%seglen]),CR_RANGE(chansegment[i%seglen]),CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i])); */ if (chanlist[i] != chansegment[i % seglen]) { - printk - ("comedi%d: pcl818: bad channel or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n", - dev->minor, i, CR_CHAN(chansegment[i]), - CR_RANGE(chansegment[i]), - CR_AREF(chansegment[i]), - CR_CHAN(chanlist[i % seglen]), - CR_RANGE(chanlist[i % seglen]), - CR_AREF(chansegment[i % seglen])); + dev_dbg(dev->class_dev, + "bad channel or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n", + i, CR_CHAN(chansegment[i]), + CR_RANGE(chansegment[i]), + CR_AREF(chansegment[i]), + CR_CHAN(chanlist[i % seglen]), + CR_RANGE(chanlist[i % seglen]), + CR_AREF(chansegment[i % seglen])); return 0; /* chan/gain list is strange */ } } } else { seglen = 1; } - printk("check_channel_list: seglen %d\n", seglen); return seglen; } @@ -1067,7 +1066,6 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) struct comedi_cmd *cmd = &s->async->cmd; int retval; - dev_dbg(dev->class_dev, "pcl818_ai_cmd()\n"); devpriv->ai_n_chan = cmd->chanlist_len; devpriv->ai_chanlist = cmd->chanlist; devpriv->ai_flags = cmd->flags; @@ -1084,7 +1082,6 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) if (cmd->convert_src == TRIG_TIMER) { /* mode 1 */ devpriv->ai_timer1 = cmd->convert_arg; retval = pcl818_ai_cmd_mode(1, dev, s); - dev_dbg(dev->class_dev, "pcl818_ai_cmd() end\n"); return retval; } if (cmd->convert_src == TRIG_EXT) { /* mode 3 */ @@ -1105,7 +1102,6 @@ static int pcl818_ai_cancel(struct comedi_device *dev, struct pcl818_private *devpriv = dev->private; if (devpriv->irq_blocked > 0) { - dev_dbg(dev->class_dev, "pcl818_ai_cancel()\n"); devpriv->irq_was_now_closed = 1; switch (devpriv->ai_mode) { @@ -1149,7 +1145,6 @@ static int pcl818_ai_cancel(struct comedi_device *dev, } end: - dev_dbg(dev->class_dev, "pcl818_ai_cancel() end\n"); return 0; } @@ -1216,7 +1211,6 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it) const struct pcl818_board *board = comedi_board(dev); struct pcl818_private *devpriv; int ret; - unsigned int irq; int dma; unsigned long pages; struct comedi_subdevice *s; @@ -1240,50 +1234,28 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it) return -EIO; } - /* grab our IRQ */ - irq = 0; - if (board->IRQbits != 0) { /* board support IRQ */ - irq = it->options[1]; - if (irq) { /* we want to use IRQ */ - if (((1 << irq) & board->IRQbits) == 0) { - printk - (", IRQ %u is out of allowed range, DISABLING IT", - irq); - irq = 0; /* Bad IRQ */ - } else { - if (request_irq(irq, interrupt_pcl818, 0, - dev->board_name, dev)) { - printk - (", unable to allocate IRQ %u, DISABLING IT", - irq); - irq = 0; /* Can't use IRQ */ - } else { - printk(KERN_DEBUG "irq=%u", irq); - } - } - } + if ((1 << it->options[1]) & board->IRQbits) { + ret = request_irq(it->options[1], interrupt_pcl818, 0, + dev->board_name, dev); + if (ret == 0) + dev->irq = it->options[1]; } - dev->irq = irq; - if (irq) - devpriv->irq_free = 1; /* 1=we have allocated irq */ - else - devpriv->irq_free = 0; - devpriv->irq_blocked = 0; /* number of subdevice which use IRQ */ devpriv->ai_mode = 0; /* mode of irq */ /* grab our DMA */ dma = 0; devpriv->dma = dma; - if (!devpriv->irq_free) + if (!dev->irq) goto no_dma; /* if we haven't IRQ, we can't use DMA */ if (board->DMAbits != 0) { /* board support DMA */ dma = it->options[2]; if (dma < 1) goto no_dma; /* DMA disabled */ if (((1 << dma) & board->DMAbits) == 0) { - printk(KERN_ERR "DMA is out of allowed range, FAIL!\n"); + dev_err(dev->class_dev, + "DMA is out of allowed range, FAIL!\n"); return -EINVAL; /* Bad DMA */ } ret = request_dma(dma, dev->board_name); @@ -1298,7 +1270,6 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it) devpriv->dmapages[0] = pages; devpriv->hwdmaptr[0] = virt_to_bus((void *)devpriv->dmabuf[0]); devpriv->hwdmasize[0] = (1 << pages) * PAGE_SIZE; - /* printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE); */ devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages); if (!devpriv->dmabuf[1]) return -EBUSY; @@ -1318,27 +1289,24 @@ no_dma: s->type = COMEDI_SUBD_UNUSED; } else { s->type = COMEDI_SUBD_AI; - devpriv->sub_ai = s; s->subdev_flags = SDF_READABLE; if (check_single_ended(dev->iobase)) { s->n_chan = board->n_aichan_se; s->subdev_flags |= SDF_COMMON | SDF_GROUND; - printk(", %dchans S.E. DAC", s->n_chan); } else { s->n_chan = board->n_aichan_diff; s->subdev_flags |= SDF_DIFF; - printk(", %dchans DIFF DAC", s->n_chan); } s->maxdata = board->ai_maxdata; - s->len_chanlist = s->n_chan; s->range_table = board->ai_range_type; - s->cancel = pcl818_ai_cancel; s->insn_read = pcl818_ai_insn_read; - if (irq) { + if (dev->irq) { dev->read_subdev = s; s->subdev_flags |= SDF_CMD_READ; + s->len_chanlist = s->n_chan; s->do_cmdtest = ai_cmdtest; s->do_cmd = ai_cmd; + s->cancel = pcl818_ai_cancel; } if (board->is_818) { if ((it->options[4] == 1) || (it->options[4] == 10)) @@ -1387,7 +1355,6 @@ no_dma: s->subdev_flags = SDF_WRITABLE | SDF_GROUND; s->n_chan = board->n_aochan; s->maxdata = board->ao_maxdata; - s->len_chanlist = board->n_aochan; s->range_table = board->ao_range_type; s->insn_read = pcl818_ao_insn_read; s->insn_write = pcl818_ao_insn_write; @@ -1412,7 +1379,6 @@ no_dma: s->subdev_flags = SDF_READABLE; s->n_chan = board->n_dichan; s->maxdata = 1; - s->len_chanlist = board->n_dichan; s->range_table = &range_digital; s->insn_bits = pcl818_di_insn_bits; } @@ -1425,7 +1391,6 @@ no_dma: s->subdev_flags = SDF_WRITABLE; s->n_chan = board->n_dochan; s->maxdata = 1; - s->len_chanlist = board->n_dochan; s->range_table = &range_digital; s->insn_bits = pcl818_do_insn_bits; } @@ -1446,8 +1411,6 @@ no_dma: pcl818_reset(dev); - printk("\n"); - return 0; } @@ -1456,7 +1419,7 @@ static void pcl818_detach(struct comedi_device *dev) struct pcl818_private *devpriv = dev->private; if (devpriv) { - pcl818_ai_cancel(dev, devpriv->sub_ai); + pcl818_ai_cancel(dev, dev->read_subdev); pcl818_reset(dev); if (devpriv->dma) free_dma(devpriv->dma); diff --git a/drivers/staging/comedi/drivers/pcm3724.c b/drivers/staging/comedi/drivers/pcm3724.c index cc1dc7f66e5b..f4a49bd649f0 100644 --- a/drivers/staging/comedi/drivers/pcm3724.c +++ b/drivers/staging/comedi/drivers/pcm3724.c @@ -70,14 +70,11 @@ static int subdev_8255_cb(int dir, int port, int data, unsigned long arg) { unsigned long iobase = arg; unsigned char inbres; - /* printk("8255cb %d %d %d %lx\n", dir,port,data,arg); */ if (dir) { - /* printk("8255 cb outb(%x, %lx)\n", data, iobase+port); */ outb(data, iobase + port); return 0; } else { inbres = inb(iobase + port); - /* printk("8255 cb inb(%lx) = %x\n", iobase+port, inbres); */ return inbres; } } @@ -137,8 +134,6 @@ static void do_3724_config(struct comedi_device *dev, port_8255_cfg = dev->iobase + SIZE_8255 + _8255_CR; outb(buffer_config, dev->iobase + 8); /* update buffer register */ - /* printk("pcm3724 buffer_config (%lx) %d, %x\n", - dev->iobase + _8255_CR, chanspec, buffer_config); */ outb(config, port_8255_cfg); } @@ -177,7 +172,6 @@ static void enable_chan(struct comedi_device *dev, struct comedi_subdevice *s, if (priv->dio_2 & 0xff) gatecfg |= GATE_A1; - /* printk("gate control %x\n", gatecfg); */ outb(gatecfg, dev->iobase + 9); } diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c index 14cee3ac92c5..c388f7f32227 100644 --- a/drivers/staging/comedi/drivers/pcmmio.c +++ b/drivers/staging/comedi/drivers/pcmmio.c @@ -1,76 +1,76 @@ /* - comedi/drivers/pcmmio.c - Driver for Winsystems PC-104 based multifunction IO board. - - COMEDI - Linux Control and Measurement Device Interface - Copyright (C) 2007 Calin A. Culianu <calin@ajvar.org> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. -*/ + * pcmmio.c + * Driver for Winsystems PC-104 based multifunction IO board. + * + * COMEDI - Linux Control and Measurement Device Interface + * Copyright (C) 2007 Calin A. Culianu <calin@ajvar.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + /* -Driver: pcmmio -Description: A driver for the PCM-MIO multifunction board -Devices: [Winsystems] PCM-MIO (pcmmio) -Author: Calin Culianu <calin@ajvar.org> -Updated: Wed, May 16 2007 16:21:10 -0500 -Status: works - -A driver for the relatively new PCM-MIO multifunction board from -Winsystems. This board is a PC-104 based I/O board. It contains -four subdevices: - subdevice 0 - 16 channels of 16-bit AI - subdevice 1 - 8 channels of 16-bit AO - subdevice 2 - first 24 channels of the 48 channel of DIO - (with edge-triggered interrupt support) - subdevice 3 - last 24 channels of the 48 channel DIO - (no interrupt support for this bank of channels) - - Some notes: - - Synchronous reads and writes are the only things implemented for AI and AO, - even though the hardware itself can do streaming acquisition, etc. Anyone - want to add asynchronous I/O for AI/AO as a feature? Be my guest... - - Asynchronous I/O for the DIO subdevices *is* implemented, however! They are - basically edge-triggered interrupts for any configuration of the first - 24 DIO-lines. - - Also note that this interrupt support is untested. - - A few words about edge-detection IRQ support (commands on DIO): - - * To use edge-detection IRQ support for the DIO subdevice, pass the IRQ - of the board to the comedi_config command. The board IRQ is not jumpered - but rather configured through software, so any IRQ from 1-15 is OK. - - * Due to the genericity of the comedi API, you need to create a special - comedi_command in order to use edge-triggered interrupts for DIO. - - * Use comedi_commands with TRIG_NOW. Your callback will be called each - time an edge is detected on the specified DIO line(s), and the data - values will be two sample_t's, which should be concatenated to form - one 32-bit unsigned int. This value is the mask of channels that had - edges detected from your channel list. Note that the bits positions - in the mask correspond to positions in your chanlist when you - specified the command and *not* channel id's! - - * To set the polarity of the edge-detection interrupts pass a nonzero value - for either CR_RANGE or CR_AREF for edge-up polarity, or a zero - value for both CR_RANGE and CR_AREF if you want edge-down polarity. - -Configuration Options: - [0] - I/O port base address - [1] - IRQ (optional -- for edge-detect interrupt support only, - leave out if you don't need this feature) -*/ + * Driver: pcmmio + * Description: A driver for the PCM-MIO multifunction board + * Devices: (Winsystems) PCM-MIO [pcmmio] + * Author: Calin Culianu <calin@ajvar.org> + * Updated: Wed, May 16 2007 16:21:10 -0500 + * Status: works + * + * A driver for the PCM-MIO multifunction board from Winsystems. This + * is a PC-104 based I/O board. It contains four subdevices: + * + * subdevice 0 - 16 channels of 16-bit AI + * subdevice 1 - 8 channels of 16-bit AO + * subdevice 2 - first 24 channels of the 48 channel of DIO + * (with edge-triggered interrupt support) + * subdevice 3 - last 24 channels of the 48 channel DIO + * (no interrupt support for this bank of channels) + * + * Some notes: + * + * Synchronous reads and writes are the only things implemented for analog + * input and output. The hardware itself can do streaming acquisition, etc. + * + * Asynchronous I/O for the DIO subdevices *is* implemented, however! They + * are basically edge-triggered interrupts for any configuration of the + * channels in subdevice 2. + * + * Also note that this interrupt support is untested. + * + * A few words about edge-detection IRQ support (commands on DIO): + * + * To use edge-detection IRQ support for the DIO subdevice, pass the IRQ + * of the board to the comedi_config command. The board IRQ is not jumpered + * but rather configured through software, so any IRQ from 1-15 is OK. + * + * Due to the genericity of the comedi API, you need to create a special + * comedi_command in order to use edge-triggered interrupts for DIO. + * + * Use comedi_commands with TRIG_NOW. Your callback will be called each + * time an edge is detected on the specified DIO line(s), and the data + * values will be two sample_t's, which should be concatenated to form + * one 32-bit unsigned int. This value is the mask of channels that had + * edges detected from your channel list. Note that the bits positions + * in the mask correspond to positions in your chanlist when you + * specified the command and *not* channel id's! + * + * To set the polarity of the edge-detection interrupts pass a nonzero value + * for either CR_RANGE or CR_AREF for edge-up polarity, or a zero + * value for both CR_RANGE and CR_AREF if you want edge-down polarity. + * + * Configuration Options: + * [0] - I/O port base address + * [1] - IRQ (optional -- for edge-detect interrupt support only, + * leave out if you don't need this feature) + */ #include <linux/module.h> #include <linux/interrupt.h> @@ -80,232 +80,211 @@ Configuration Options: #include "comedi_fc.h" -/* This stuff is all from pcmuio.c -- it refers to the DIO subdevices only */ -#define CHANS_PER_PORT 8 -#define PORTS_PER_ASIC 6 -#define INTR_PORTS_PER_ASIC 3 -#define MAX_CHANS_PER_SUBDEV 24 /* number of channels per comedi subdevice */ -#define PORTS_PER_SUBDEV (MAX_CHANS_PER_SUBDEV/CHANS_PER_PORT) -#define CHANS_PER_ASIC (CHANS_PER_PORT*PORTS_PER_ASIC) -#define INTR_CHANS_PER_ASIC 24 -#define INTR_PORTS_PER_SUBDEV (INTR_CHANS_PER_ASIC/CHANS_PER_PORT) -#define MAX_DIO_CHANS (PORTS_PER_ASIC*1*CHANS_PER_PORT) -#define MAX_ASICS (MAX_DIO_CHANS/CHANS_PER_ASIC) -#define CALC_N_DIO_SUBDEVS(nchans) ((nchans)/MAX_CHANS_PER_SUBDEV + (!!((nchans)%MAX_CHANS_PER_SUBDEV)) /*+ (nchans > INTR_CHANS_PER_ASIC ? 2 : 1)*/) -/* IO Memory sizes */ -#define ASIC_IOSIZE (0x0B) -#define PCMMIO48_IOSIZE ASIC_IOSIZE - -/* Some offsets - these are all in the 16byte IO memory offset from - the base address. Note that there is a paging scheme to swap out - offsets 0x8-0xA using the PAGELOCK register. See the table below. - - Register(s) Pages R/W? Description - -------------------------------------------------------------- - REG_PORTx All R/W Read/Write/Configure IO - REG_INT_PENDING All ReadOnly Quickly see which INT_IDx has int. - REG_PAGELOCK All WriteOnly Select a page - REG_POLx Pg. 1 only WriteOnly Select edge-detection polarity - REG_ENABx Pg. 2 only WriteOnly Enable/Disable edge-detect. int. - REG_INT_IDx Pg. 3 only R/W See which ports/bits have ints. +/* + * Register I/O map */ -#define REG_PORT0 0x0 -#define REG_PORT1 0x1 -#define REG_PORT2 0x2 -#define REG_PORT3 0x3 -#define REG_PORT4 0x4 -#define REG_PORT5 0x5 -#define REG_INT_PENDING 0x6 -#define REG_PAGELOCK 0x7 /* - * page selector register, upper 2 bits select - * a page and bits 0-5 are used to 'lock down' - * a particular port above to make it readonly. - */ -#define REG_POL0 0x8 -#define REG_POL1 0x9 -#define REG_POL2 0xA -#define REG_ENAB0 0x8 -#define REG_ENAB1 0x9 -#define REG_ENAB2 0xA -#define REG_INT_ID0 0x8 -#define REG_INT_ID1 0x9 -#define REG_INT_ID2 0xA - -#define NUM_PAGED_REGS 3 -#define NUM_PAGES 4 -#define FIRST_PAGED_REG 0x8 -#define REG_PAGE_BITOFFSET 6 -#define REG_LOCK_BITOFFSET 0 -#define REG_PAGE_MASK (~((0x1<<REG_PAGE_BITOFFSET)-1)) -#define REG_LOCK_MASK (~(REG_PAGE_MASK)) -#define PAGE_POL 1 -#define PAGE_ENAB 2 -#define PAGE_INT_ID 3 - -static const struct comedi_lrange ranges_ai = { - 4, {RANGE(-5., 5.), RANGE(-10., 10.), RANGE(0., 5.), RANGE(0., 10.)} -}; +#define PCMMIO_AI_LSB_REG 0x00 +#define PCMMIO_AI_MSB_REG 0x01 +#define PCMMIO_AI_CMD_REG 0x02 +#define PCMMIO_AI_CMD_SE (1 << 7) +#define PCMMIO_AI_CMD_ODD_CHAN (1 << 6) +#define PCMMIO_AI_CMD_CHAN_SEL(x) (((x) & 0x3) << 4) +#define PCMMIO_AI_CMD_RANGE(x) (((x) & 0x3) << 2) +#define PCMMIO_RESOURCE_REG 0x02 +#define PCMMIO_RESOURCE_IRQ(x) (((x) & 0xf) << 0) +#define PCMMIO_AI_STATUS_REG 0x03 +#define PCMMIO_AI_STATUS_DATA_READY (1 << 7) +#define PCMMIO_AI_STATUS_DATA_DMA_PEND (1 << 6) +#define PCMMIO_AI_STATUS_CMD_DMA_PEND (1 << 5) +#define PCMMIO_AI_STATUS_IRQ_PEND (1 << 4) +#define PCMMIO_AI_STATUS_DATA_DRQ_ENA (1 << 2) +#define PCMMIO_AI_STATUS_REG_SEL (1 << 3) +#define PCMMIO_AI_STATUS_CMD_DRQ_ENA (1 << 1) +#define PCMMIO_AI_STATUS_IRQ_ENA (1 << 0) +#define PCMMIO_AI_RES_ENA_REG 0x03 +#define PCMMIO_AI_RES_ENA_CMD_REG_ACCESS (0 << 3) +#define PCMMIO_AI_RES_ENA_AI_RES_ACCESS (1 << 3) +#define PCMMIO_AI_RES_ENA_DIO_RES_ACCESS (1 << 4) +#define PCMMIO_AI_2ND_ADC_OFFSET 0x04 + +#define PCMMIO_AO_LSB_REG 0x08 +#define PCMMIO_AO_LSB_SPAN(x) (((x) & 0xf) << 0) +#define PCMMIO_AO_MSB_REG 0x09 +#define PCMMIO_AO_CMD_REG 0x0a +#define PCMMIO_AO_CMD_WR_SPAN (0x2 << 4) +#define PCMMIO_AO_CMD_WR_CODE (0x3 << 4) +#define PCMMIO_AO_CMD_UPDATE (0x4 << 4) +#define PCMMIO_AO_CMD_UPDATE_ALL (0x5 << 4) +#define PCMMIO_AO_CMD_WR_SPAN_UPDATE (0x6 << 4) +#define PCMMIO_AO_CMD_WR_CODE_UPDATE (0x7 << 4) +#define PCMMIO_AO_CMD_WR_SPAN_UPDATE_ALL (0x8 << 4) +#define PCMMIO_AO_CMD_WR_CODE_UPDATE_ALL (0x9 << 4) +#define PCMMIO_AO_CMD_RD_B1_SPAN (0xa << 4) +#define PCMMIO_AO_CMD_RD_B1_CODE (0xb << 4) +#define PCMMIO_AO_CMD_RD_B2_SPAN (0xc << 4) +#define PCMMIO_AO_CMD_RD_B2_CODE (0xd << 4) +#define PCMMIO_AO_CMD_NOP (0xf << 4) +#define PCMMIO_AO_CMD_CHAN_SEL(x) (((x) & 0x03) << 1) +#define PCMMIO_AO_CMD_CHAN_SEL_ALL (0x0f << 0) +#define PCMMIO_AO_STATUS_REG 0x0b +#define PCMMIO_AO_STATUS_DATA_READY (1 << 7) +#define PCMMIO_AO_STATUS_DATA_DMA_PEND (1 << 6) +#define PCMMIO_AO_STATUS_CMD_DMA_PEND (1 << 5) +#define PCMMIO_AO_STATUS_IRQ_PEND (1 << 4) +#define PCMMIO_AO_STATUS_DATA_DRQ_ENA (1 << 2) +#define PCMMIO_AO_STATUS_REG_SEL (1 << 3) +#define PCMMIO_AO_STATUS_CMD_DRQ_ENA (1 << 1) +#define PCMMIO_AO_STATUS_IRQ_ENA (1 << 0) +#define PCMMIO_AO_RESOURCE_ENA_REG 0x0b +#define PCMMIO_AO_2ND_DAC_OFFSET 0x04 -static const struct comedi_lrange ranges_ao = { - 6, {RANGE(0., 5.), RANGE(0., 10.), RANGE(-5., 5.), RANGE(-10., 10.), - RANGE(-2.5, 2.5), RANGE(-2.5, 7.5)} +/* + * WinSystems WS16C48 + * + * Offset Page 0 Page 1 Page 2 Page 3 + * ------ ----------- ----------- ----------- ----------- + * 0x10 Port 0 I/O Port 0 I/O Port 0 I/O Port 0 I/O + * 0x11 Port 1 I/O Port 1 I/O Port 1 I/O Port 1 I/O + * 0x12 Port 2 I/O Port 2 I/O Port 2 I/O Port 2 I/O + * 0x13 Port 3 I/O Port 3 I/O Port 3 I/O Port 3 I/O + * 0x14 Port 4 I/O Port 4 I/O Port 4 I/O Port 4 I/O + * 0x15 Port 5 I/O Port 5 I/O Port 5 I/O Port 5 I/O + * 0x16 INT_PENDING INT_PENDING INT_PENDING INT_PENDING + * 0x17 Page/Lock Page/Lock Page/Lock Page/Lock + * 0x18 N/A POL_0 ENAB_0 INT_ID0 + * 0x19 N/A POL_1 ENAB_1 INT_ID1 + * 0x1a N/A POL_2 ENAB_2 INT_ID2 + */ +#define PCMMIO_PORT_REG(x) (0x10 + (x)) +#define PCMMIO_INT_PENDING_REG 0x16 +#define PCMMIO_PAGE_LOCK_REG 0x17 +#define PCMMIO_LOCK_PORT(x) ((1 << (x)) & 0x3f) +#define PCMMIO_PAGE(x) (((x) & 0x3) << 6) +#define PCMMIO_PAGE_MASK PCMUIO_PAGE(3) +#define PCMMIO_PAGE_POL 1 +#define PCMMIO_PAGE_ENAB 2 +#define PCMMIO_PAGE_INT_ID 3 +#define PCMMIO_PAGE_REG(x) (0x18 + (x)) + +static const struct comedi_lrange pcmmio_ai_ranges = { + 4, { + BIP_RANGE(5), + BIP_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(10) + } }; -/* this structure is for data unique to this subdevice. */ -struct pcmmio_subdev_private { - - union { - /* for DIO: mapping of halfwords (bytes) - in port/chanarray to iobase */ - unsigned long iobases[PORTS_PER_SUBDEV]; - - /* for AI/AO */ - unsigned long iobase; - }; - union { - struct { - - /* The below is only used for intr subdevices */ - struct { - /* - * if non-negative, this subdev has an - * interrupt asic - */ - int asic; - /* - * if nonnegative, the first channel id for - * interrupts. - */ - int first_chan; - /* - * the number of asic channels in this subdev - * that have interrutps - */ - int num_asic_chans; - /* - * if nonnegative, the first channel id with - * respect to the asic that has interrupts - */ - int asic_chan; - /* - * subdev-relative channel mask for channels - * we are interested in - */ - int enabled_mask; - int active; - int stop_count; - int continuous; - spinlock_t spinlock; - } intr; - } dio; - struct { - /* the last unsigned int data written */ - unsigned int shadow_samples[8]; - } ao; - }; +static const struct comedi_lrange pcmmio_ao_ranges = { + 6, { + UNI_RANGE(5), + UNI_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(10), + BIP_RANGE(2.5), + RANGE(-2.5, 7.5) + } }; -/* - * this structure is for data unique to this hardware driver. If - * several hardware drivers keep similar information in this structure, - * feel free to suggest moving the variable to the struct comedi_device struct. - */ struct pcmmio_private { - /* stuff for DIO */ - struct { - unsigned char pagelock; /* current page and lock */ - /* shadow of POLx registers */ - unsigned char pol[NUM_PAGED_REGS]; - /* shadow of ENABx registers */ - unsigned char enab[NUM_PAGED_REGS]; - int num; - unsigned long iobase; - unsigned int irq; - spinlock_t spinlock; - } asics[MAX_ASICS]; - struct pcmmio_subdev_private *sprivs; + spinlock_t pagelock; /* protects the page registers */ + spinlock_t spinlock; /* protects the member variables */ + unsigned int enabled_mask; + unsigned int stop_count; + unsigned int active:1; + unsigned int continuous:1; + + unsigned int ao_readback[8]; }; -#define subpriv ((struct pcmmio_subdev_private *)s->private) +static void pcmmio_dio_write(struct comedi_device *dev, unsigned int val, + int page, int port) +{ + struct pcmmio_private *devpriv = dev->private; + unsigned long iobase = dev->iobase; + unsigned long flags; + + spin_lock_irqsave(&devpriv->pagelock, flags); + if (page == 0) { + /* Port registers are valid for any page */ + outb(val & 0xff, iobase + PCMMIO_PORT_REG(port + 0)); + outb((val >> 8) & 0xff, iobase + PCMMIO_PORT_REG(port + 1)); + outb((val >> 16) & 0xff, iobase + PCMMIO_PORT_REG(port + 2)); + } else { + outb(PCMMIO_PAGE(page), iobase + PCMMIO_PAGE_LOCK_REG); + outb(val & 0xff, iobase + PCMMIO_PAGE_REG(0)); + outb((val >> 8) & 0xff, iobase + PCMMIO_PAGE_REG(1)); + outb((val >> 16) & 0xff, iobase + PCMMIO_PAGE_REG(2)); + } + spin_unlock_irqrestore(&devpriv->pagelock, flags); +} + +static unsigned int pcmmio_dio_read(struct comedi_device *dev, + int page, int port) +{ + struct pcmmio_private *devpriv = dev->private; + unsigned long iobase = dev->iobase; + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&devpriv->pagelock, flags); + if (page == 0) { + /* Port registers are valid for any page */ + val = inb(iobase + PCMMIO_PORT_REG(port + 0)); + val |= (inb(iobase + PCMMIO_PORT_REG(port + 1)) << 8); + val |= (inb(iobase + PCMMIO_PORT_REG(port + 2)) << 16); + } else { + outb(PCMMIO_PAGE(page), iobase + PCMMIO_PAGE_LOCK_REG); + val = inb(iobase + PCMMIO_PAGE_REG(0)); + val |= (inb(iobase + PCMMIO_PAGE_REG(1)) << 8); + val |= (inb(iobase + PCMMIO_PAGE_REG(2)) << 16); + } + spin_unlock_irqrestore(&devpriv->pagelock, flags); + + return val; +} -/* DIO devices are slightly special. Although it is possible to - * implement the insn_read/insn_write interface, it is much more - * useful to applications if you implement the insn_bits interface. - * This allows packed reading/writing of the DIO channels. The - * comedi core can convert between insn_bits and insn_read/write */ +/* + * Each channel can be individually programmed for input or output. + * Writing a '0' to a channel causes the corresponding output pin + * to go to a high-z state (pulled high by an external 10K resistor). + * This allows it to be used as an input. When used in the input mode, + * a read reflects the inverted state of the I/O pin, such that a + * high on the pin will read as a '0' in the register. Writing a '1' + * to a bit position causes the pin to sink current (up to 12mA), + * effectively pulling it low. + */ static int pcmmio_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) + struct comedi_insn *insn, + unsigned int *data) { - int byte_no; - - /* NOTE: - reading a 0 means this channel was high - writine a 0 sets the channel high - reading a 1 means this channel was low - writing a 1 means set this channel low - - Therefore everything is always inverted. */ - - /* The insn data is a mask in data[0] and the new data - * in data[1], each channel cooresponding to a bit. */ - -#ifdef DAMMIT_ITS_BROKEN - /* DEBUG */ - printk(KERN_DEBUG "write mask: %08x data: %08x\n", data[0], data[1]); -#endif - - s->state = 0; - - for (byte_no = 0; byte_no < s->n_chan / CHANS_PER_PORT; ++byte_no) { - /* address of 8-bit port */ - unsigned long ioaddr = subpriv->iobases[byte_no], - /* bit offset of port in 32-bit doubleword */ - offset = byte_no * 8; - /* this 8-bit port's data */ - unsigned char byte = 0, - /* The write mask for this port (if any) */ - write_mask_byte = (data[0] >> offset) & 0xff, - /* The data byte for this port */ - data_byte = (data[1] >> offset) & 0xff; - - byte = inb(ioaddr); /* read all 8-bits for this port */ - -#ifdef DAMMIT_ITS_BROKEN - /* DEBUG */ - printk - (KERN_DEBUG "byte %d wmb %02x db %02x offset %02d io %04x," - " data_in %02x ", byte_no, (unsigned)write_mask_byte, - (unsigned)data_byte, offset, ioaddr, (unsigned)byte); -#endif - - if (write_mask_byte) { - /* - * this byte has some write_bits - * -- so set the output lines - */ - /* clear bits for write mask */ - byte &= ~write_mask_byte; - /* set to inverted data_byte */ - byte |= ~data_byte & write_mask_byte; - /* Write out the new digital output state */ - outb(byte, ioaddr); - } -#ifdef DAMMIT_ITS_BROKEN - /* DEBUG */ - printk(KERN_DEBUG "data_out_byte %02x\n", (unsigned)byte); -#endif - /* save the digital input lines for this byte.. */ - s->state |= ((unsigned int)byte) << offset; + /* subdevice 2 uses ports 0-2, subdevice 3 uses ports 3-5 */ + int port = s->index == 2 ? 0 : 3; + unsigned int chanmask = (1 << s->n_chan) - 1; + unsigned int mask; + unsigned int val; + + mask = comedi_dio_update_state(s, data); + if (mask) { + /* + * Outputs are inverted, invert the state and + * update the channels. + * + * The s->io_bits mask makes sure the input channels + * are '0' so that the outputs pins stay in a high + * z-state. + */ + val = ~s->state & chanmask; + val &= s->io_bits; + pcmmio_dio_write(dev, val, 0, port); } - /* now return the DIO lines to data[1] - note they came inverted! */ - data[1] = ~s->state; + /* get inverted state of the channels from the port */ + val = pcmmio_dio_read(dev, 0, port); -#ifdef DAMMIT_ITS_BROKEN - /* DEBUG */ - printk(KERN_DEBUG "s->state %08x data_out %08x\n", s->state, data[1]); -#endif + /* return the true state of the channels */ + data[1] = ~val & chanmask; return insn->n; } @@ -315,376 +294,172 @@ static int pcmmio_dio_insn_config(struct comedi_device *dev, struct comedi_insn *insn, unsigned int *data) { - unsigned int chan = CR_CHAN(insn->chanspec); - int byte_no = chan / 8; - int bit_no = chan % 8; + /* subdevice 2 uses ports 0-2, subdevice 3 uses ports 3-5 */ + int port = s->index == 2 ? 0 : 3; int ret; ret = comedi_dio_insn_config(dev, s, insn, data, 0); if (ret) return ret; - if (data[0] == INSN_CONFIG_DIO_INPUT) { - unsigned long ioaddr = subpriv->iobases[byte_no]; - unsigned char val; - - val = inb(ioaddr); - val &= ~(1 << bit_no); - outb(val, ioaddr); - } + if (data[0] == INSN_CONFIG_DIO_INPUT) + pcmmio_dio_write(dev, s->io_bits, 0, port); return insn->n; } -static void switch_page(struct comedi_device *dev, int asic, int page) +static void pcmmio_reset(struct comedi_device *dev) { - struct pcmmio_private *devpriv = dev->private; - - if (asic < 0 || asic >= 1) - return; /* paranoia */ - if (page < 0 || page >= NUM_PAGES) - return; /* more paranoia */ - - devpriv->asics[asic].pagelock &= ~REG_PAGE_MASK; - devpriv->asics[asic].pagelock |= page << REG_PAGE_BITOFFSET; - - /* now write out the shadow register */ - outb(devpriv->asics[asic].pagelock, - devpriv->asics[asic].iobase + REG_PAGELOCK); + /* Clear all the DIO port bits */ + pcmmio_dio_write(dev, 0, 0, 0); + pcmmio_dio_write(dev, 0, 0, 3); + + /* Clear all the paged registers */ + pcmmio_dio_write(dev, 0, PCMMIO_PAGE_POL, 0); + pcmmio_dio_write(dev, 0, PCMMIO_PAGE_ENAB, 0); + pcmmio_dio_write(dev, 0, PCMMIO_PAGE_INT_ID, 0); } -static void init_asics(struct comedi_device *dev) -{ /* sets up an - ASIC chip to defaults */ +/* devpriv->spinlock is already locked */ +static void pcmmio_stop_intr(struct comedi_device *dev, + struct comedi_subdevice *s) +{ struct pcmmio_private *devpriv = dev->private; - int asic; - - for (asic = 0; asic < 1; ++asic) { - int port, page; - unsigned long baseaddr = devpriv->asics[asic].iobase; - - switch_page(dev, asic, 0); /* switch back to page 0 */ - - /* first, clear all the DIO port bits */ - for (port = 0; port < PORTS_PER_ASIC; ++port) - outb(0, baseaddr + REG_PORT0 + port); - - /* Next, clear all the paged registers for each page */ - for (page = 1; page < NUM_PAGES; ++page) { - int reg; - /* now clear all the paged registers */ - switch_page(dev, asic, page); - for (reg = FIRST_PAGED_REG; - reg < FIRST_PAGED_REG + NUM_PAGED_REGS; ++reg) - outb(0, baseaddr + reg); - } - /* DEBUG set rising edge interrupts on port0 of both asics */ - /*switch_page(dev, asic, PAGE_POL); - outb(0xff, baseaddr + REG_POL0); - switch_page(dev, asic, PAGE_ENAB); - outb(0xff, baseaddr + REG_ENAB0); */ - /* END DEBUG */ + devpriv->enabled_mask = 0; + devpriv->active = 0; + s->async->inttrig = NULL; - /* switch back to default page 0 */ - switch_page(dev, asic, 0); - } + /* disable all dio interrupts */ + pcmmio_dio_write(dev, 0, PCMMIO_PAGE_ENAB, 0); } -#ifdef notused -static void lock_port(struct comedi_device *dev, int asic, int port) +static void pcmmio_handle_dio_intr(struct comedi_device *dev, + struct comedi_subdevice *s, + unsigned int triggered) { struct pcmmio_private *devpriv = dev->private; + unsigned int oldevents = s->async->events; + unsigned int len = s->async->cmd.chanlist_len; + unsigned int val = 0; + unsigned long flags; + int i; - if (asic < 0 || asic >= 1) - return; /* paranoia */ - if (port < 0 || port >= PORTS_PER_ASIC) - return; /* more paranoia */ + spin_lock_irqsave(&devpriv->spinlock, flags); - devpriv->asics[asic].pagelock |= 0x1 << port; - /* now write out the shadow register */ - outb(devpriv->asics[asic].pagelock, - devpriv->asics[asic].iobase + REG_PAGELOCK); - return; -} + if (!devpriv->active) + goto done; -static void unlock_port(struct comedi_device *dev, int asic, int port) -{ - struct pcmmio_private *devpriv = dev->private; + if (!(triggered & devpriv->enabled_mask)) + goto done; - if (asic < 0 || asic >= 1) - return; /* paranoia */ - if (port < 0 || port >= PORTS_PER_ASIC) - return; /* more paranoia */ - devpriv->asics[asic].pagelock &= ~(0x1 << port) | REG_LOCK_MASK; - /* now write out the shadow register */ - outb(devpriv->asics[asic].pagelock, - devpriv->asics[asic].iobase + REG_PAGELOCK); -} -#endif /* notused */ + for (i = 0; i < len; i++) { + unsigned int chan = CR_CHAN(s->async->cmd.chanlist[i]); -static void pcmmio_stop_intr(struct comedi_device *dev, - struct comedi_subdevice *s) -{ - struct pcmmio_private *devpriv = dev->private; - int nports, firstport, asic, port; + if (triggered & (1 << chan)) + val |= (1 << i); + } - asic = subpriv->dio.intr.asic; - if (asic < 0) - return; /* not an interrupt subdev */ + /* Write the scan to the buffer. */ + if (comedi_buf_put(s->async, val) && + comedi_buf_put(s->async, val >> 16)) { + s->async->events |= (COMEDI_CB_BLOCK | COMEDI_CB_EOS); + } else { + /* Overflow! Stop acquisition!! */ + /* TODO: STOP_ACQUISITION_CALL_HERE!! */ + pcmmio_stop_intr(dev, s); + } - subpriv->dio.intr.enabled_mask = 0; - subpriv->dio.intr.active = 0; - s->async->inttrig = NULL; - nports = subpriv->dio.intr.num_asic_chans / CHANS_PER_PORT; - firstport = subpriv->dio.intr.asic_chan / CHANS_PER_PORT; - switch_page(dev, asic, PAGE_ENAB); - for (port = firstport; port < firstport + nports; ++port) { - /* disable all intrs for this subdev.. */ - outb(0, devpriv->asics[asic].iobase + REG_ENAB0 + port); + /* Check for end of acquisition. */ + if (!devpriv->continuous) { + /* stop_src == TRIG_COUNT */ + if (devpriv->stop_count > 0) { + devpriv->stop_count--; + if (devpriv->stop_count == 0) { + s->async->events |= COMEDI_CB_EOA; + /* TODO: STOP_ACQUISITION_CALL_HERE!! */ + pcmmio_stop_intr(dev, s); + } + } } + +done: + spin_unlock_irqrestore(&devpriv->spinlock, flags); + + if (oldevents != s->async->events) + comedi_event(dev, s); } static irqreturn_t interrupt_pcmmio(int irq, void *d) { - int asic, got1 = 0; - struct comedi_device *dev = (struct comedi_device *)d; - struct pcmmio_private *devpriv = dev->private; - int i; + struct comedi_device *dev = d; + struct comedi_subdevice *s = dev->read_subdev; + unsigned int triggered; + unsigned char int_pend; - for (asic = 0; asic < MAX_ASICS; ++asic) { - if (irq == devpriv->asics[asic].irq) { - unsigned long flags; - unsigned triggered = 0; - unsigned long iobase = devpriv->asics[asic].iobase; - /* it is an interrupt for ASIC #asic */ - unsigned char int_pend; - - spin_lock_irqsave(&devpriv->asics[asic].spinlock, - flags); - - int_pend = inb(iobase + REG_INT_PENDING) & 0x07; - - if (int_pend) { - int port; - for (port = 0; port < INTR_PORTS_PER_ASIC; - ++port) { - if (int_pend & (0x1 << port)) { - unsigned char - io_lines_with_edges = 0; - switch_page(dev, asic, - PAGE_INT_ID); - io_lines_with_edges = - inb(iobase + - REG_INT_ID0 + port); - - if (io_lines_with_edges) - /* - * clear pending - * interrupt - */ - outb(0, iobase + - REG_INT_ID0 + - port); - - triggered |= - io_lines_with_edges << - port * 8; - } - } - - ++got1; - } + /* are there any interrupts pending */ + int_pend = inb(dev->iobase + PCMMIO_INT_PENDING_REG) & 0x07; + if (!int_pend) + return IRQ_NONE; - spin_unlock_irqrestore(&devpriv->asics[asic].spinlock, - flags); - - if (triggered) { - struct comedi_subdevice *s; - /* - * TODO here: dispatch io lines to subdevs - * with commands.. - */ - printk - (KERN_DEBUG "got edge detect interrupt %d asic %d which_chans: %06x\n", - irq, asic, triggered); - for (i = 2; i < dev->n_subdevices; i++) { - s = &dev->subdevices[i]; - /* - * this is an interrupt subdev, - * and it matches this asic! - */ - if (subpriv->dio.intr.asic == asic) { - unsigned long flags; - unsigned oldevents; - - spin_lock_irqsave(&subpriv->dio. - intr.spinlock, - flags); - - oldevents = s->async->events; - - if (subpriv->dio.intr.active) { - unsigned mytrig = - ((triggered >> - subpriv->dio.intr.asic_chan) - & - ((0x1 << subpriv-> - dio.intr. - num_asic_chans) - - 1)) << subpriv-> - dio.intr.first_chan; - if (mytrig & - subpriv->dio. - intr.enabled_mask) { - unsigned int val - = 0; - unsigned int n, - ch, len; - - len = - s-> - async->cmd.chanlist_len; - for (n = 0; - n < len; - n++) { - ch = CR_CHAN(s->async->cmd.chanlist[n]); - if (mytrig & (1U << ch)) - val |= (1U << n); - } - /* Write the scan to the buffer. */ - if (comedi_buf_put(s->async, val) - && - comedi_buf_put - (s->async, - val >> 16)) { - s->async->events |= (COMEDI_CB_BLOCK | COMEDI_CB_EOS); - } else { - /* Overflow! Stop acquisition!! */ - /* TODO: STOP_ACQUISITION_CALL_HERE!! */ - pcmmio_stop_intr - (dev, - s); - } - - /* Check for end of acquisition. */ - if (!subpriv->dio.intr.continuous) { - /* stop_src == TRIG_COUNT */ - if (subpriv->dio.intr.stop_count > 0) { - subpriv->dio.intr.stop_count--; - if (subpriv->dio.intr.stop_count == 0) { - s->async->events |= COMEDI_CB_EOA; - /* TODO: STOP_ACQUISITION_CALL_HERE!! */ - pcmmio_stop_intr - (dev, - s); - } - } - } - } - } - - spin_unlock_irqrestore - (&subpriv->dio.intr. - spinlock, flags); - - if (oldevents != - s->async->events) { - comedi_event(dev, s); - } - - } - - } - } + /* get, and clear, the pending interrupts */ + triggered = pcmmio_dio_read(dev, PCMMIO_PAGE_INT_ID, 0); + pcmmio_dio_write(dev, 0, PCMMIO_PAGE_INT_ID, 0); + + pcmmio_handle_dio_intr(dev, s, triggered); - } - } - if (!got1) - return IRQ_NONE; /* interrupt from other source */ return IRQ_HANDLED; } +/* devpriv->spinlock is already locked */ static int pcmmio_start_intr(struct comedi_device *dev, struct comedi_subdevice *s) { struct pcmmio_private *devpriv = dev->private; + struct comedi_cmd *cmd = &s->async->cmd; + unsigned int bits = 0; + unsigned int pol_bits = 0; + int i; - if (!subpriv->dio.intr.continuous && subpriv->dio.intr.stop_count == 0) { + if (!devpriv->continuous && devpriv->stop_count == 0) { /* An empty acquisition! */ s->async->events |= COMEDI_CB_EOA; - subpriv->dio.intr.active = 0; + devpriv->active = 0; return 1; - } else { - unsigned bits = 0, pol_bits = 0, n; - int nports, firstport, asic, port; - struct comedi_cmd *cmd = &s->async->cmd; - - asic = subpriv->dio.intr.asic; - if (asic < 0) - return 1; /* not an interrupt - subdev */ - subpriv->dio.intr.enabled_mask = 0; - subpriv->dio.intr.active = 1; - nports = subpriv->dio.intr.num_asic_chans / CHANS_PER_PORT; - firstport = subpriv->dio.intr.asic_chan / CHANS_PER_PORT; - if (cmd->chanlist) { - for (n = 0; n < cmd->chanlist_len; n++) { - bits |= (1U << CR_CHAN(cmd->chanlist[n])); - pol_bits |= (CR_AREF(cmd->chanlist[n]) - || CR_RANGE(cmd-> - chanlist[n]) ? 1U : 0U) - << CR_CHAN(cmd->chanlist[n]); - } - } - bits &= ((0x1 << subpriv->dio.intr.num_asic_chans) - - 1) << subpriv->dio.intr.first_chan; - subpriv->dio.intr.enabled_mask = bits; - - { - /* - * the below code configures the board - * to use a specific IRQ from 0-15. - */ - unsigned char b; - /* - * set resource enable register - * to enable IRQ operation - */ - outb(1 << 4, dev->iobase + 3); - /* set bits 0-3 of b to the irq number from 0-15 */ - b = dev->irq & ((1 << 4) - 1); - outb(b, dev->iobase + 2); - /* done, we told the board what irq to use */ - } + } - switch_page(dev, asic, PAGE_ENAB); - for (port = firstport; port < firstport + nports; ++port) { - unsigned enab = - bits >> (subpriv->dio.intr.first_chan + (port - - firstport) - * 8) & 0xff, pol = - pol_bits >> (subpriv->dio.intr.first_chan + - (port - firstport) * 8) & 0xff; - /* set enab intrs for this subdev.. */ - outb(enab, - devpriv->asics[asic].iobase + REG_ENAB0 + port); - switch_page(dev, asic, PAGE_POL); - outb(pol, - devpriv->asics[asic].iobase + REG_ENAB0 + port); + devpriv->enabled_mask = 0; + devpriv->active = 1; + if (cmd->chanlist) { + for (i = 0; i < cmd->chanlist_len; i++) { + unsigned int chanspec = cmd->chanlist[i]; + unsigned int chan = CR_CHAN(chanspec); + unsigned int range = CR_RANGE(chanspec); + unsigned int aref = CR_AREF(chanspec); + + bits |= (1 << chan); + pol_bits |= (((aref || range) ? 1 : 0) << chan); } } + bits &= ((1 << s->n_chan) - 1); + devpriv->enabled_mask = bits; + + /* set polarity and enable interrupts */ + pcmmio_dio_write(dev, pol_bits, PCMMIO_PAGE_POL, 0); + pcmmio_dio_write(dev, bits, PCMMIO_PAGE_ENAB, 0); + return 0; } static int pcmmio_cancel(struct comedi_device *dev, struct comedi_subdevice *s) { + struct pcmmio_private *devpriv = dev->private; unsigned long flags; - spin_lock_irqsave(&subpriv->dio.intr.spinlock, flags); - if (subpriv->dio.intr.active) + spin_lock_irqsave(&devpriv->spinlock, flags); + if (devpriv->active) pcmmio_stop_intr(dev, s); - spin_unlock_irqrestore(&subpriv->dio.intr.spinlock, flags); + spin_unlock_irqrestore(&devpriv->spinlock, flags); return 0; } @@ -696,17 +471,18 @@ static int pcmmio_inttrig_start_intr(struct comedi_device *dev, struct comedi_subdevice *s, unsigned int trignum) { + struct pcmmio_private *devpriv = dev->private; unsigned long flags; int event = 0; if (trignum != 0) return -EINVAL; - spin_lock_irqsave(&subpriv->dio.intr.spinlock, flags); + spin_lock_irqsave(&devpriv->spinlock, flags); s->async->inttrig = NULL; - if (subpriv->dio.intr.active) + if (devpriv->active) event = pcmmio_start_intr(dev, s); - spin_unlock_irqrestore(&subpriv->dio.intr.spinlock, flags); + spin_unlock_irqrestore(&devpriv->spinlock, flags); if (event) comedi_event(dev, s); @@ -719,23 +495,24 @@ pcmmio_inttrig_start_intr(struct comedi_device *dev, struct comedi_subdevice *s, */ static int pcmmio_cmd(struct comedi_device *dev, struct comedi_subdevice *s) { + struct pcmmio_private *devpriv = dev->private; struct comedi_cmd *cmd = &s->async->cmd; unsigned long flags; int event = 0; - spin_lock_irqsave(&subpriv->dio.intr.spinlock, flags); - subpriv->dio.intr.active = 1; + spin_lock_irqsave(&devpriv->spinlock, flags); + devpriv->active = 1; /* Set up end of acquisition. */ switch (cmd->stop_src) { case TRIG_COUNT: - subpriv->dio.intr.continuous = 0; - subpriv->dio.intr.stop_count = cmd->stop_arg; + devpriv->continuous = 0; + devpriv->stop_count = cmd->stop_arg; break; default: /* TRIG_NONE */ - subpriv->dio.intr.continuous = 1; - subpriv->dio.intr.stop_count = 0; + devpriv->continuous = 1; + devpriv->stop_count = 0; break; } @@ -749,7 +526,7 @@ static int pcmmio_cmd(struct comedi_device *dev, struct comedi_subdevice *s) event = pcmmio_start_intr(dev, s); break; } - spin_unlock_irqrestore(&subpriv->dio.intr.spinlock, flags); + spin_unlock_irqrestore(&devpriv->spinlock, flags); if (event) comedi_event(dev, s); @@ -812,188 +589,171 @@ static int pcmmio_cmdtest(struct comedi_device *dev, return 0; } -static int adc_wait_ready(unsigned long iobase) +static int pcmmio_ai_wait_for_eoc(unsigned long iobase, unsigned int timeout) { - unsigned long retry = 100000; - while (retry--) - if (inb(iobase + 3) & 0x80) + unsigned char status; + + while (timeout--) { + status = inb(iobase + PCMMIO_AI_STATUS_REG); + if (status & PCMMIO_AI_STATUS_DATA_READY) return 0; - return 1; + } + return -ETIME; } -/* All this is for AI and AO */ -static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) +static int pcmmio_ai_insn_read(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) { - int n; - unsigned long iobase = subpriv->iobase; + unsigned long iobase = dev->iobase; + unsigned int chan = CR_CHAN(insn->chanspec); + unsigned int range = CR_RANGE(insn->chanspec); + unsigned int aref = CR_AREF(insn->chanspec); + unsigned char cmd = 0; + unsigned int val; + int ret; + int i; /* - 1. write the CMD byte (to BASE+2) - 2. read junk lo byte (BASE+0) - 3. read junk hi byte (BASE+1) - 4. (mux settled so) write CMD byte again (BASE+2) - 5. read valid lo byte(BASE+0) - 6. read valid hi byte(BASE+1) - - Additionally note that the BASE += 4 if the channel >= 8 + * The PCM-MIO uses two Linear Tech LTC1859CG 8-channel A/D converters. + * The devices use a full duplex serial interface which transmits and + * receives data simultaneously. An 8-bit command is shifted into the + * ADC interface to configure it for the next conversion. At the same + * time, the data from the previous conversion is shifted out of the + * device. Consequently, the conversion result is delayed by one + * conversion from the command word. + * + * Setup the cmd for the conversions then do a dummy conversion to + * flush the junk data. Then do each conversion requested by the + * comedi_insn. Note that the last conversion will leave junk data + * in ADC which will get flushed on the next comedi_insn. */ - /* convert n samples */ - for (n = 0; n < insn->n; n++) { - unsigned chan = CR_CHAN(insn->chanspec), range = - CR_RANGE(insn->chanspec), aref = CR_AREF(insn->chanspec); - unsigned char command_byte = 0; - unsigned iooffset = 0; - unsigned short sample, adc_adjust = 0; - - if (chan > 7) - chan -= 8, iooffset = 4; /* - * use the second dword - * for channels > 7 - */ - - if (aref != AREF_DIFF) { - aref = AREF_GROUND; - command_byte |= 1 << 7; /* - * set bit 7 to indicate - * single-ended - */ - } - if (range < 2) - adc_adjust = 0x8000; /* - * bipolar ranges - * (-5,5 .. -10,10 need to be - * adjusted -- that is.. they - * need to wrap around by - * adding 0x8000 - */ - - if (chan % 2) { - command_byte |= 1 << 6; /* - * odd-numbered channels - * have bit 6 set - */ - } - - /* select the channel, bits 4-5 == chan/2 */ - command_byte |= ((chan / 2) & 0x3) << 4; + if (chan > 7) { + chan -= 8; + iobase += PCMMIO_AI_2ND_ADC_OFFSET; + } - /* set the range, bits 2-3 */ - command_byte |= (range & 0x3) << 2; + if (aref == AREF_GROUND) + cmd |= PCMMIO_AI_CMD_SE; + if (chan % 2) + cmd |= PCMMIO_AI_CMD_ODD_CHAN; + cmd |= PCMMIO_AI_CMD_CHAN_SEL(chan / 2); + cmd |= PCMMIO_AI_CMD_RANGE(range); - /* need to do this twice to make sure mux settled */ - /* chan/range/aref select */ - outb(command_byte, iobase + iooffset + 2); + outb(cmd, iobase + PCMMIO_AI_CMD_REG); + ret = pcmmio_ai_wait_for_eoc(iobase, 100000); + if (ret) + return ret; - /* wait for the adc to say it finised the conversion */ - adc_wait_ready(iobase + iooffset); + val = inb(iobase + PCMMIO_AI_LSB_REG); + val |= inb(iobase + PCMMIO_AI_MSB_REG) << 8; - /* select the chan/range/aref AGAIN */ - outb(command_byte, iobase + iooffset + 2); + for (i = 0; i < insn->n; i++) { + outb(cmd, iobase + PCMMIO_AI_CMD_REG); + ret = pcmmio_ai_wait_for_eoc(iobase, 100000); + if (ret) + return ret; - adc_wait_ready(iobase + iooffset); + val = inb(iobase + PCMMIO_AI_LSB_REG); + val |= inb(iobase + PCMMIO_AI_MSB_REG) << 8; - /* read data lo byte */ - sample = inb(iobase + iooffset + 0); + /* bipolar data is two's complement */ + if (comedi_range_is_bipolar(s, range)) + val = comedi_offset_munge(s, val); - /* read data hi byte */ - sample |= inb(iobase + iooffset + 1) << 8; - sample += adc_adjust; /* adjustment .. munge data */ - data[n] = sample; + data[i] = val; } - /* return the number of samples read/written */ - return n; + + return insn->n; } -static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) +static int pcmmio_ao_insn_read(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) { - int n; - for (n = 0; n < insn->n; n++) { - unsigned chan = CR_CHAN(insn->chanspec); - if (chan < s->n_chan) - data[n] = subpriv->ao.shadow_samples[chan]; - } - return n; + struct pcmmio_private *devpriv = dev->private; + unsigned int chan = CR_CHAN(insn->chanspec); + int i; + + for (i = 0; i < insn->n; i++) + data[i] = devpriv->ao_readback[chan]; + + return insn->n; } -static int wait_dac_ready(unsigned long iobase) +static int pcmmio_ao_wait_for_eoc(unsigned long iobase, unsigned int timeout) { - unsigned long retry = 100000L; + unsigned char status; - /* This may seem like an absurd way to handle waiting and violates the - "no busy waiting" policy. The fact is that the hardware is - normally so fast that we usually only need one time through the loop - anyway. The longer timeout is for rare occasions and for detecting - non-existent hardware. */ - - while (retry--) { - if (inb(iobase + 3) & 0x80) + while (timeout--) { + status = inb(iobase + PCMMIO_AO_STATUS_REG); + if (status & PCMMIO_AO_STATUS_DATA_READY) return 0; - } - return 1; + return -ETIME; } -static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) +static int pcmmio_ao_insn_write(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) { - int n; - unsigned iobase = subpriv->iobase, iooffset = 0; - - for (n = 0; n < insn->n; n++) { - unsigned chan = CR_CHAN(insn->chanspec), range = - CR_RANGE(insn->chanspec); - if (chan < s->n_chan) { - unsigned char command_byte = 0, range_byte = - range & ((1 << 4) - 1); - if (chan >= 4) - chan -= 4, iooffset += 4; - /* set the range.. */ - outb(range_byte, iobase + iooffset + 0); - outb(0, iobase + iooffset + 1); - - /* tell it to begin */ - command_byte = (chan << 1) | 0x60; - outb(command_byte, iobase + iooffset + 2); - - wait_dac_ready(iobase + iooffset); - - /* low order byte */ - outb(data[n] & 0xff, iobase + iooffset + 0); - - /* high order byte */ - outb((data[n] >> 8) & 0xff, iobase + iooffset + 1); - - /* - * set bit 4 of command byte to indicate - * data is loaded and trigger conversion - */ - command_byte = 0x70 | (chan << 1); - /* trigger converion */ - outb(command_byte, iobase + iooffset + 2); - - wait_dac_ready(iobase + iooffset); - - /* save to shadow register for ao_rinsn */ - subpriv->ao.shadow_samples[chan] = data[n]; - } + struct pcmmio_private *devpriv = dev->private; + unsigned long iobase = dev->iobase; + unsigned int chan = CR_CHAN(insn->chanspec); + unsigned int range = CR_RANGE(insn->chanspec); + unsigned int val = devpriv->ao_readback[chan]; + unsigned char cmd = 0; + int ret; + int i; + + /* + * The PCM-MIO has two Linear Tech LTC2704 DAC devices. Each device + * is a 4-channel converter with software-selectable output range. + */ + + if (chan > 3) { + cmd |= PCMMIO_AO_CMD_CHAN_SEL(chan - 4); + iobase += PCMMIO_AO_2ND_DAC_OFFSET; + } else { + cmd |= PCMMIO_AO_CMD_CHAN_SEL(chan); } - return n; + + /* set the range for the channel */ + outb(PCMMIO_AO_LSB_SPAN(range), iobase + PCMMIO_AO_LSB_REG); + outb(0, iobase + PCMMIO_AO_MSB_REG); + outb(cmd | PCMMIO_AO_CMD_WR_SPAN_UPDATE, iobase + PCMMIO_AO_CMD_REG); + ret = pcmmio_ao_wait_for_eoc(iobase, 100000); + if (ret) + return ret; + + for (i = 0; i < insn->n; i++) { + val = data[i]; + + /* write the data to the channel */ + outb(val & 0xff, iobase + PCMMIO_AO_LSB_REG); + outb((val >> 8) & 0xff, iobase + PCMMIO_AO_MSB_REG); + outb(cmd | PCMMIO_AO_CMD_WR_CODE_UPDATE, + iobase + PCMMIO_AO_CMD_REG); + ret = pcmmio_ao_wait_for_eoc(iobase, 100000); + if (ret) + return ret; + + devpriv->ao_readback[chan] = val; + } + + return insn->n; } static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it) { struct pcmmio_private *devpriv; struct comedi_subdevice *s; - int sdev_no, chans_left, n_dio_subdevs, n_subdevs, port, asic, - thisasic_chanct = 0; - unsigned int irq[MAX_ASICS]; int ret; - irq[0] = it->options[1]; - ret = comedi_request_region(dev, it->options[0], 32); if (ret) return ret; @@ -1002,177 +762,99 @@ static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it) if (!devpriv) return -ENOMEM; - for (asic = 0; asic < MAX_ASICS; ++asic) { - devpriv->asics[asic].num = asic; - devpriv->asics[asic].iobase = - dev->iobase + 16 + asic * ASIC_IOSIZE; - /* - * this gets actually set at the end of this function when we - * request_irqs - */ - devpriv->asics[asic].irq = 0; - spin_lock_init(&devpriv->asics[asic].spinlock); - } + spin_lock_init(&devpriv->pagelock); + spin_lock_init(&devpriv->spinlock); - chans_left = CHANS_PER_ASIC * 1; - n_dio_subdevs = CALC_N_DIO_SUBDEVS(chans_left); - n_subdevs = n_dio_subdevs + 2; - devpriv->sprivs = - kcalloc(n_subdevs, sizeof(struct pcmmio_subdev_private), - GFP_KERNEL); - if (!devpriv->sprivs) { - printk(KERN_ERR "comedi%d: cannot allocate subdevice private data structures\n", - dev->minor); - return -ENOMEM; + pcmmio_reset(dev); + + if (it->options[1]) { + ret = request_irq(it->options[1], interrupt_pcmmio, 0, + dev->board_name, dev); + if (ret == 0) { + dev->irq = it->options[1]; + + /* configure the interrupt routing on the board */ + outb(PCMMIO_AI_RES_ENA_DIO_RES_ACCESS, + dev->iobase + PCMMIO_AI_RES_ENA_REG); + outb(PCMMIO_RESOURCE_IRQ(dev->irq), + dev->iobase + PCMMIO_RESOURCE_REG); + } } - ret = comedi_alloc_subdevices(dev, n_subdevs); + ret = comedi_alloc_subdevices(dev, 4); if (ret) return ret; - /* First, AI */ + /* Analog Input subdevice */ s = &dev->subdevices[0]; - s->private = &devpriv->sprivs[0]; - s->maxdata = 0xffff; - s->range_table = &ranges_ai; - s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF; - s->type = COMEDI_SUBD_AI; - s->n_chan = 16; - s->len_chanlist = s->n_chan; - s->insn_read = ai_rinsn; - subpriv->iobase = dev->iobase + 0; - /* initialize the resource enable register by clearing it */ - outb(0, subpriv->iobase + 3); - outb(0, subpriv->iobase + 4 + 3); + s->type = COMEDI_SUBD_AI; + s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF; + s->n_chan = 16; + s->maxdata = 0xffff; + s->range_table = &pcmmio_ai_ranges; + s->insn_read = pcmmio_ai_insn_read; - /* Next, AO */ - s = &dev->subdevices[1]; - s->private = &devpriv->sprivs[1]; - s->maxdata = 0xffff; - s->range_table = &ranges_ao; - s->subdev_flags = SDF_READABLE; - s->type = COMEDI_SUBD_AO; - s->n_chan = 8; - s->len_chanlist = s->n_chan; - s->insn_read = ao_rinsn; - s->insn_write = ao_winsn; - subpriv->iobase = dev->iobase + 8; /* initialize the resource enable register by clearing it */ - outb(0, subpriv->iobase + 3); - outb(0, subpriv->iobase + 4 + 3); - - port = 0; - asic = 0; - for (sdev_no = 2; sdev_no < dev->n_subdevices; ++sdev_no) { - int byte_no; - - s = &dev->subdevices[sdev_no]; - s->private = &devpriv->sprivs[sdev_no]; - s->maxdata = 1; - s->range_table = &range_digital; - s->subdev_flags = SDF_READABLE | SDF_WRITABLE; - s->type = COMEDI_SUBD_DIO; - s->insn_bits = pcmmio_dio_insn_bits; - s->insn_config = pcmmio_dio_insn_config; - s->n_chan = min(chans_left, MAX_CHANS_PER_SUBDEV); - subpriv->dio.intr.asic = -1; - subpriv->dio.intr.first_chan = -1; - subpriv->dio.intr.asic_chan = -1; - subpriv->dio.intr.num_asic_chans = -1; - subpriv->dio.intr.active = 0; - s->len_chanlist = 1; - - /* save the ioport address for each 'port' of 8 channels in the - subdevice */ - for (byte_no = 0; byte_no < PORTS_PER_SUBDEV; ++byte_no, ++port) { - if (port >= PORTS_PER_ASIC) { - port = 0; - ++asic; - thisasic_chanct = 0; - } - subpriv->iobases[byte_no] = - devpriv->asics[asic].iobase + port; - - if (thisasic_chanct < - CHANS_PER_PORT * INTR_PORTS_PER_ASIC - && subpriv->dio.intr.asic < 0) { - /* - * this is an interrupt subdevice, - * so setup the struct - */ - subpriv->dio.intr.asic = asic; - subpriv->dio.intr.active = 0; - subpriv->dio.intr.stop_count = 0; - subpriv->dio.intr.first_chan = byte_no * 8; - subpriv->dio.intr.asic_chan = thisasic_chanct; - subpriv->dio.intr.num_asic_chans = - s->n_chan - subpriv->dio.intr.first_chan; - s->cancel = pcmmio_cancel; - s->do_cmd = pcmmio_cmd; - s->do_cmdtest = pcmmio_cmdtest; - s->len_chanlist = - subpriv->dio.intr.num_asic_chans; - } - thisasic_chanct += CHANS_PER_PORT; - } - spin_lock_init(&subpriv->dio.intr.spinlock); - - chans_left -= s->n_chan; + outb(PCMMIO_AI_RES_ENA_CMD_REG_ACCESS, + dev->iobase + PCMMIO_AI_RES_ENA_REG); + outb(PCMMIO_AI_RES_ENA_CMD_REG_ACCESS, + dev->iobase + PCMMIO_AI_RES_ENA_REG + PCMMIO_AI_2ND_ADC_OFFSET); - if (!chans_left) { - /* - * reset the asic to our first asic, - * to do intr subdevs - */ - asic = 0; - port = 0; - } + /* Analog Output subdevice */ + s = &dev->subdevices[1]; + s->type = COMEDI_SUBD_AO; + s->subdev_flags = SDF_READABLE; + s->n_chan = 8; + s->maxdata = 0xffff; + s->range_table = &pcmmio_ao_ranges; + s->insn_read = pcmmio_ao_insn_read; + s->insn_write = pcmmio_ao_insn_write; + /* initialize the resource enable register by clearing it */ + outb(0, dev->iobase + PCMMIO_AO_RESOURCE_ENA_REG); + outb(0, dev->iobase + PCMMIO_AO_2ND_DAC_OFFSET + + PCMMIO_AO_RESOURCE_ENA_REG); + + /* Digital I/O subdevice with interrupt support */ + s = &dev->subdevices[2]; + s->type = COMEDI_SUBD_DIO; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = 24; + s->maxdata = 1; + s->len_chanlist = 1; + s->range_table = &range_digital; + s->insn_bits = pcmmio_dio_insn_bits; + s->insn_config = pcmmio_dio_insn_config; + if (dev->irq) { + dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; + s->len_chanlist = s->n_chan; + s->cancel = pcmmio_cancel; + s->do_cmd = pcmmio_cmd; + s->do_cmdtest = pcmmio_cmdtest; } - init_asics(dev); /* clear out all the registers, basically */ - - for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) { - if (irq[asic] - && request_irq(irq[asic], interrupt_pcmmio, - IRQF_SHARED, dev->board_name, dev)) { - int i; - /* unroll the allocated irqs.. */ - for (i = asic - 1; i >= 0; --i) { - free_irq(irq[i], dev); - devpriv->asics[i].irq = irq[i] = 0; - } - irq[asic] = 0; - } - devpriv->asics[asic].irq = irq[asic]; - } + /* Digital I/O subdevice */ + s = &dev->subdevices[3]; + s->type = COMEDI_SUBD_DIO; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = 24; + s->maxdata = 1; + s->range_table = &range_digital; + s->insn_bits = pcmmio_dio_insn_bits; + s->insn_config = pcmmio_dio_insn_config; - return 1; -} - -static void pcmmio_detach(struct comedi_device *dev) -{ - struct pcmmio_private *devpriv = dev->private; - int i; - - if (devpriv) { - for (i = 0; i < MAX_ASICS; ++i) { - if (devpriv->asics[i].irq) - free_irq(devpriv->asics[i].irq, dev); - } - kfree(devpriv->sprivs); - } - comedi_legacy_detach(dev); + return 0; } static struct comedi_driver pcmmio_driver = { .driver_name = "pcmmio", .module = THIS_MODULE, .attach = pcmmio_attach, - .detach = pcmmio_detach, + .detach = comedi_legacy_detach, }; module_comedi_driver(pcmmio_driver); MODULE_AUTHOR("Comedi http://www.comedi.org"); -MODULE_DESCRIPTION("Comedi low-level driver"); +MODULE_DESCRIPTION("Comedi driver for Winsystems PCM-MIO PC/104 board"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c index 954fa96a50ac..a8f390f7a874 100644 --- a/drivers/staging/comedi/drivers/pcmuio.c +++ b/drivers/staging/comedi/drivers/pcmuio.c @@ -75,7 +75,6 @@ #include <linux/module.h> #include <linux/interrupt.h> -#include <linux/slab.h> #include "../comedidev.h" @@ -127,36 +126,53 @@ static const struct pcmuio_board pcmuio_boards[] = { }, }; -struct pcmuio_subdev_private { - /* The below is only used for intr subdevices */ - struct { - /* if non-negative, this subdev has an interrupt asic */ - int asic; - /* - * subdev-relative channel mask for channels - * we are interested in - */ - int enabled_mask; - int active; - int stop_count; - int continuous; - spinlock_t spinlock; - } intr; +struct pcmuio_asic { + spinlock_t pagelock; /* protects the page registers */ + spinlock_t spinlock; /* protects member variables */ + unsigned int enabled_mask; + unsigned int stop_count; + unsigned int active:1; + unsigned int continuous:1; }; struct pcmuio_private { - struct { - unsigned int irq; - spinlock_t spinlock; - } asics[PCMUIO_MAX_ASICS]; - struct pcmuio_subdev_private *sprivs; + struct pcmuio_asic asics[PCMUIO_MAX_ASICS]; + unsigned int irq2; }; +static inline unsigned long pcmuio_asic_iobase(struct comedi_device *dev, + int asic) +{ + return dev->iobase + (asic * PCMUIO_ASIC_IOSIZE); +} + +static inline int pcmuio_subdevice_to_asic(struct comedi_subdevice *s) +{ + /* + * subdevice 0 and 1 are handled by the first asic + * subdevice 2 and 3 are handled by the second asic + */ + return s->index / 2; +} + +static inline int pcmuio_subdevice_to_port(struct comedi_subdevice *s) +{ + /* + * subdevice 0 and 2 use port registers 0-2 + * subdevice 1 and 3 use port registers 3-5 + */ + return (s->index % 2) ? 3 : 0; +} + static void pcmuio_write(struct comedi_device *dev, unsigned int val, int asic, int page, int port) { - unsigned long iobase = dev->iobase + (asic * PCMUIO_ASIC_IOSIZE); + struct pcmuio_private *devpriv = dev->private; + struct pcmuio_asic *chip = &devpriv->asics[asic]; + unsigned long iobase = pcmuio_asic_iobase(dev, asic); + unsigned long flags; + spin_lock_irqsave(&chip->pagelock, flags); if (page == 0) { /* Port registers are valid for any page */ outb(val & 0xff, iobase + PCMUIO_PORT_REG(port + 0)); @@ -168,14 +184,19 @@ static void pcmuio_write(struct comedi_device *dev, unsigned int val, outb((val >> 8) & 0xff, iobase + PCMUIO_PAGE_REG(1)); outb((val >> 16) & 0xff, iobase + PCMUIO_PAGE_REG(2)); } + spin_unlock_irqrestore(&chip->pagelock, flags); } static unsigned int pcmuio_read(struct comedi_device *dev, int asic, int page, int port) { - unsigned long iobase = dev->iobase + (asic * PCMUIO_ASIC_IOSIZE); + struct pcmuio_private *devpriv = dev->private; + struct pcmuio_asic *chip = &devpriv->asics[asic]; + unsigned long iobase = pcmuio_asic_iobase(dev, asic); + unsigned long flags; unsigned int val; + spin_lock_irqsave(&chip->pagelock, flags); if (page == 0) { /* Port registers are valid for any page */ val = inb(iobase + PCMUIO_PORT_REG(port + 0)); @@ -187,6 +208,7 @@ static unsigned int pcmuio_read(struct comedi_device *dev, val |= (inb(iobase + PCMUIO_PAGE_REG(1)) << 8); val |= (inb(iobase + PCMUIO_PAGE_REG(2)) << 16); } + spin_unlock_irqrestore(&chip->pagelock, flags); return val; } @@ -203,30 +225,35 @@ static unsigned int pcmuio_read(struct comedi_device *dev, */ static int pcmuio_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) + struct comedi_insn *insn, + unsigned int *data) { - unsigned int mask = data[0] & s->io_bits; /* outputs only */ - unsigned int bits = data[1]; - int asic = s->index / 2; - int port = (s->index % 2) ? 3 : 0; + int asic = pcmuio_subdevice_to_asic(s); + int port = pcmuio_subdevice_to_port(s); + unsigned int chanmask = (1 << s->n_chan) - 1; + unsigned int mask; unsigned int val; - /* get inverted state of the channels from the port */ - val = pcmuio_read(dev, asic, 0, port); - - /* get the true state of the channels */ - s->state = val ^ ((0x1 << s->n_chan) - 1); - + mask = comedi_dio_update_state(s, data); if (mask) { - s->state &= ~mask; - s->state |= (mask & bits); - - /* invert the state and update the channels */ - val = s->state ^ ((0x1 << s->n_chan) - 1); + /* + * Outputs are inverted, invert the state and + * update the channels. + * + * The s->io_bits mask makes sure the input channels + * are '0' so that the outputs pins stay in a high + * z-state. + */ + val = ~s->state & chanmask; + val &= s->io_bits; pcmuio_write(dev, val, asic, 0, port); } - data[1] = s->state; + /* get inverted state of the channels from the port */ + val = pcmuio_read(dev, asic, 0, port); + + /* return the true state of the channels */ + data[1] = ~val & chanmask; return insn->n; } @@ -236,8 +263,8 @@ static int pcmuio_dio_insn_config(struct comedi_device *dev, struct comedi_insn *insn, unsigned int *data) { - int asic = s->index / 2; - int port = (s->index % 2) ? 3 : 0; + int asic = pcmuio_subdevice_to_asic(s); + int port = pcmuio_subdevice_to_port(s); int ret; ret = comedi_dio_insn_config(dev, s, insn, data, 0); @@ -267,18 +294,16 @@ static void pcmuio_reset(struct comedi_device *dev) } } +/* chip->spinlock is already locked */ static void pcmuio_stop_intr(struct comedi_device *dev, struct comedi_subdevice *s) { - struct pcmuio_subdev_private *subpriv = s->private; - int asic; - - asic = subpriv->intr.asic; - if (asic < 0) - return; /* not an interrupt subdev */ + struct pcmuio_private *devpriv = dev->private; + int asic = pcmuio_subdevice_to_asic(s); + struct pcmuio_asic *chip = &devpriv->asics[asic]; - subpriv->intr.enabled_mask = 0; - subpriv->intr.active = 0; + chip->enabled_mask = 0; + chip->active = 0; s->async->inttrig = NULL; /* disable all intrs for this subdev.. */ @@ -289,29 +314,27 @@ static void pcmuio_handle_intr_subdev(struct comedi_device *dev, struct comedi_subdevice *s, unsigned triggered) { - struct pcmuio_subdev_private *subpriv = s->private; + struct pcmuio_private *devpriv = dev->private; + int asic = pcmuio_subdevice_to_asic(s); + struct pcmuio_asic *chip = &devpriv->asics[asic]; unsigned int len = s->async->cmd.chanlist_len; unsigned oldevents = s->async->events; unsigned int val = 0; unsigned long flags; - unsigned mytrig; unsigned int i; - spin_lock_irqsave(&subpriv->intr.spinlock, flags); + spin_lock_irqsave(&chip->spinlock, flags); - if (!subpriv->intr.active) + if (!chip->active) goto done; - mytrig = triggered; - mytrig &= ((0x1 << s->n_chan) - 1); - - if (!(mytrig & subpriv->intr.enabled_mask)) + if (!(triggered & chip->enabled_mask)) goto done; for (i = 0; i < len; i++) { unsigned int chan = CR_CHAN(s->async->cmd.chanlist[i]); - if (mytrig & (1U << chan)) - val |= (1U << i); + if (triggered & (1 << chan)) + val |= (1 << i); } /* Write the scan to the buffer. */ @@ -325,11 +348,11 @@ static void pcmuio_handle_intr_subdev(struct comedi_device *dev, } /* Check for end of acquisition. */ - if (!subpriv->intr.continuous) { + if (!chip->continuous) { /* stop_src == TRIG_COUNT */ - if (subpriv->intr.stop_count > 0) { - subpriv->intr.stop_count--; - if (subpriv->intr.stop_count == 0) { + if (chip->stop_count > 0) { + chip->stop_count--; + if (chip->stop_count == 0) { s->async->events |= COMEDI_CB_EOA; /* TODO: STOP_ACQUISITION_CALL_HERE!! */ pcmuio_stop_intr(dev, s); @@ -338,7 +361,7 @@ static void pcmuio_handle_intr_subdev(struct comedi_device *dev, } done: - spin_unlock_irqrestore(&subpriv->intr.spinlock, flags); + spin_unlock_irqrestore(&chip->spinlock, flags); if (oldevents != s->async->events) comedi_event(dev, s); @@ -346,114 +369,93 @@ done: static int pcmuio_handle_asic_interrupt(struct comedi_device *dev, int asic) { - struct pcmuio_private *devpriv = dev->private; - struct pcmuio_subdev_private *subpriv; - unsigned long iobase = dev->iobase + (asic * PCMUIO_ASIC_IOSIZE); - unsigned int triggered = 0; - int got1 = 0; - unsigned long flags; - unsigned char int_pend; - int i; + /* there are could be two asics so we can't use dev->read_subdev */ + struct comedi_subdevice *s = &dev->subdevices[asic * 2]; + unsigned long iobase = pcmuio_asic_iobase(dev, asic); + unsigned int val; - spin_lock_irqsave(&devpriv->asics[asic].spinlock, flags); + /* are there any interrupts pending */ + val = inb(iobase + PCMUIO_INT_PENDING_REG) & 0x07; + if (!val) + return 0; - int_pend = inb(iobase + PCMUIO_INT_PENDING_REG) & 0x07; - if (int_pend) { - triggered = pcmuio_read(dev, asic, PCMUIO_PAGE_INT_ID, 0); - pcmuio_write(dev, 0, asic, PCMUIO_PAGE_INT_ID, 0); + /* get, and clear, the pending interrupts */ + val = pcmuio_read(dev, asic, PCMUIO_PAGE_INT_ID, 0); + pcmuio_write(dev, 0, asic, PCMUIO_PAGE_INT_ID, 0); - ++got1; - } + /* handle the pending interrupts */ + pcmuio_handle_intr_subdev(dev, s, val); - spin_unlock_irqrestore(&devpriv->asics[asic].spinlock, flags); - - if (triggered) { - struct comedi_subdevice *s; - /* TODO here: dispatch io lines to subdevs with commands.. */ - for (i = 0; i < dev->n_subdevices; i++) { - s = &dev->subdevices[i]; - subpriv = s->private; - if (subpriv->intr.asic == asic) { - /* - * This is an interrupt subdev, and it - * matches this asic! - */ - pcmuio_handle_intr_subdev(dev, s, - triggered); - } - } - } - return got1; + return 1; } static irqreturn_t pcmuio_interrupt(int irq, void *d) { struct comedi_device *dev = d; struct pcmuio_private *devpriv = dev->private; - int got1 = 0; - int asic; + int handled = 0; - for (asic = 0; asic < PCMUIO_MAX_ASICS; ++asic) { - if (irq == devpriv->asics[asic].irq) { - /* it is an interrupt for ASIC #asic */ - if (pcmuio_handle_asic_interrupt(dev, asic)) - got1++; - } - } - if (!got1) - return IRQ_NONE; /* interrupt from other source */ - return IRQ_HANDLED; + if (irq == dev->irq) + handled += pcmuio_handle_asic_interrupt(dev, 0); + if (irq == devpriv->irq2) + handled += pcmuio_handle_asic_interrupt(dev, 1); + + return handled ? IRQ_HANDLED : IRQ_NONE; } +/* chip->spinlock is already locked */ static int pcmuio_start_intr(struct comedi_device *dev, struct comedi_subdevice *s) { - struct pcmuio_subdev_private *subpriv = s->private; + struct pcmuio_private *devpriv = dev->private; + int asic = pcmuio_subdevice_to_asic(s); + struct pcmuio_asic *chip = &devpriv->asics[asic]; + struct comedi_cmd *cmd = &s->async->cmd; + unsigned int bits = 0; + unsigned int pol_bits = 0; + int i; - if (!subpriv->intr.continuous && subpriv->intr.stop_count == 0) { + if (!chip->continuous && chip->stop_count == 0) { /* An empty acquisition! */ s->async->events |= COMEDI_CB_EOA; - subpriv->intr.active = 0; + chip->active = 0; return 1; - } else { - unsigned bits = 0, pol_bits = 0, n; - int asic; - struct comedi_cmd *cmd = &s->async->cmd; - - asic = subpriv->intr.asic; - if (asic < 0) - return 1; /* not an interrupt - subdev */ - subpriv->intr.enabled_mask = 0; - subpriv->intr.active = 1; - if (cmd->chanlist) { - for (n = 0; n < cmd->chanlist_len; n++) { - bits |= (1U << CR_CHAN(cmd->chanlist[n])); - pol_bits |= (CR_AREF(cmd->chanlist[n]) - || CR_RANGE(cmd-> - chanlist[n]) ? 1U : 0U) - << CR_CHAN(cmd->chanlist[n]); - } - } - bits &= ((0x1 << s->n_chan) - 1); - subpriv->intr.enabled_mask = bits; + } - /* set pol and enab intrs for this subdev.. */ - pcmuio_write(dev, pol_bits, asic, PCMUIO_PAGE_POL, 0); - pcmuio_write(dev, bits, asic, PCMUIO_PAGE_ENAB, 0); + chip->enabled_mask = 0; + chip->active = 1; + if (cmd->chanlist) { + for (i = 0; i < cmd->chanlist_len; i++) { + unsigned int chanspec = cmd->chanlist[i]; + unsigned int chan = CR_CHAN(chanspec); + unsigned int range = CR_RANGE(chanspec); + unsigned int aref = CR_AREF(chanspec); + + bits |= (1 << chan); + pol_bits |= ((aref || range) ? 1 : 0) << chan; + } } + bits &= ((1 << s->n_chan) - 1); + chip->enabled_mask = bits; + + /* set pol and enab intrs for this subdev.. */ + pcmuio_write(dev, pol_bits, asic, PCMUIO_PAGE_POL, 0); + pcmuio_write(dev, bits, asic, PCMUIO_PAGE_ENAB, 0); + return 0; } static int pcmuio_cancel(struct comedi_device *dev, struct comedi_subdevice *s) { - struct pcmuio_subdev_private *subpriv = s->private; + struct pcmuio_private *devpriv = dev->private; + int asic = pcmuio_subdevice_to_asic(s); + struct pcmuio_asic *chip = &devpriv->asics[asic]; unsigned long flags; - spin_lock_irqsave(&subpriv->intr.spinlock, flags); - if (subpriv->intr.active) + spin_lock_irqsave(&chip->spinlock, flags); + if (chip->active) pcmuio_stop_intr(dev, s); - spin_unlock_irqrestore(&subpriv->intr.spinlock, flags); + spin_unlock_irqrestore(&chip->spinlock, flags); return 0; } @@ -465,19 +467,21 @@ static int pcmuio_inttrig_start_intr(struct comedi_device *dev, struct comedi_subdevice *s, unsigned int trignum) { - struct pcmuio_subdev_private *subpriv = s->private; + struct pcmuio_private *devpriv = dev->private; + int asic = pcmuio_subdevice_to_asic(s); + struct pcmuio_asic *chip = &devpriv->asics[asic]; unsigned long flags; int event = 0; if (trignum != 0) return -EINVAL; - spin_lock_irqsave(&subpriv->intr.spinlock, flags); + spin_lock_irqsave(&chip->spinlock, flags); s->async->inttrig = NULL; - if (subpriv->intr.active) + if (chip->active) event = pcmuio_start_intr(dev, s); - spin_unlock_irqrestore(&subpriv->intr.spinlock, flags); + spin_unlock_irqrestore(&chip->spinlock, flags); if (event) comedi_event(dev, s); @@ -490,24 +494,26 @@ pcmuio_inttrig_start_intr(struct comedi_device *dev, struct comedi_subdevice *s, */ static int pcmuio_cmd(struct comedi_device *dev, struct comedi_subdevice *s) { - struct pcmuio_subdev_private *subpriv = s->private; + struct pcmuio_private *devpriv = dev->private; struct comedi_cmd *cmd = &s->async->cmd; + int asic = pcmuio_subdevice_to_asic(s); + struct pcmuio_asic *chip = &devpriv->asics[asic]; unsigned long flags; int event = 0; - spin_lock_irqsave(&subpriv->intr.spinlock, flags); - subpriv->intr.active = 1; + spin_lock_irqsave(&chip->spinlock, flags); + chip->active = 1; /* Set up end of acquisition. */ switch (cmd->stop_src) { case TRIG_COUNT: - subpriv->intr.continuous = 0; - subpriv->intr.stop_count = cmd->stop_arg; + chip->continuous = 0; + chip->stop_count = cmd->stop_arg; break; default: /* TRIG_NONE */ - subpriv->intr.continuous = 1; - subpriv->intr.stop_count = 0; + chip->continuous = 1; + chip->stop_count = 0; break; } @@ -521,7 +527,7 @@ static int pcmuio_cmd(struct comedi_device *dev, struct comedi_subdevice *s) event = pcmuio_start_intr(dev, s); break; } - spin_unlock_irqrestore(&subpriv->intr.spinlock, flags); + spin_unlock_irqrestore(&chip->spinlock, flags); if (event) comedi_event(dev, s); @@ -589,13 +595,8 @@ static int pcmuio_attach(struct comedi_device *dev, struct comedi_devconfig *it) const struct pcmuio_board *board = comedi_board(dev); struct comedi_subdevice *s; struct pcmuio_private *devpriv; - struct pcmuio_subdev_private *subpriv; - int sdev_no, n_subdevs, asic; - unsigned int irq[PCMUIO_MAX_ASICS]; int ret; - - irq[0] = it->options[1]; - irq[1] = it->options[2]; + int i; ret = comedi_request_region(dev, it->options[0], board->num_asics * PCMUIO_ASIC_IOSIZE); @@ -606,62 +607,60 @@ static int pcmuio_attach(struct comedi_device *dev, struct comedi_devconfig *it) if (!devpriv) return -ENOMEM; - for (asic = 0; asic < PCMUIO_MAX_ASICS; ++asic) - spin_lock_init(&devpriv->asics[asic].spinlock); + for (i = 0; i < PCMUIO_MAX_ASICS; ++i) { + struct pcmuio_asic *chip = &devpriv->asics[i]; - n_subdevs = board->num_asics * 2; - devpriv->sprivs = kcalloc(n_subdevs, sizeof(*subpriv), GFP_KERNEL); - if (!devpriv->sprivs) - return -ENOMEM; + spin_lock_init(&chip->pagelock); + spin_lock_init(&chip->spinlock); + } - ret = comedi_alloc_subdevices(dev, n_subdevs); - if (ret) - return ret; + pcmuio_reset(dev); - for (sdev_no = 0; sdev_no < (int)dev->n_subdevices; ++sdev_no) { - s = &dev->subdevices[sdev_no]; - subpriv = &devpriv->sprivs[sdev_no]; - s->private = subpriv; - s->maxdata = 1; - s->range_table = &range_digital; - s->subdev_flags = SDF_READABLE | SDF_WRITABLE; - s->type = COMEDI_SUBD_DIO; - s->insn_bits = pcmuio_dio_insn_bits; - s->insn_config = pcmuio_dio_insn_config; - s->n_chan = 24; - - /* subdevices 0 and 2 suppport interrupts */ - if ((sdev_no % 2) == 0) { - /* setup the interrupt subdevice */ - subpriv->intr.asic = sdev_no / 2; - dev->read_subdev = s; - s->subdev_flags |= SDF_CMD_READ; - s->cancel = pcmuio_cancel; - s->do_cmd = pcmuio_cmd; - s->do_cmdtest = pcmuio_cmdtest; - s->len_chanlist = s->n_chan; - } else { - subpriv->intr.asic = -1; - s->len_chanlist = 1; + if (it->options[1]) { + /* request the irq for the 1st asic */ + ret = request_irq(it->options[1], pcmuio_interrupt, 0, + dev->board_name, dev); + if (ret == 0) + dev->irq = it->options[1]; + } + + if (board->num_asics == 2) { + if (it->options[2] == dev->irq) { + /* the same irq (or none) is used by both asics */ + devpriv->irq2 = it->options[2]; + } else if (it->options[2]) { + /* request the irq for the 2nd asic */ + ret = request_irq(it->options[2], pcmuio_interrupt, 0, + dev->board_name, dev); + if (ret == 0) + devpriv->irq2 = it->options[2]; } - spin_lock_init(&subpriv->intr.spinlock); } - pcmuio_reset(dev); + ret = comedi_alloc_subdevices(dev, board->num_asics * 2); + if (ret) + return ret; - for (asic = 0; irq[0] && asic < PCMUIO_MAX_ASICS; ++asic) { - if (irq[asic] - && request_irq(irq[asic], pcmuio_interrupt, - IRQF_SHARED, board->name, dev)) { - int i; - /* unroll the allocated irqs.. */ - for (i = asic - 1; i >= 0; --i) { - free_irq(irq[i], dev); - devpriv->asics[i].irq = irq[i] = 0; - } - irq[asic] = 0; + for (i = 0; i < dev->n_subdevices; ++i) { + s = &dev->subdevices[i]; + s->type = COMEDI_SUBD_DIO; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = 24; + s->maxdata = 1; + s->range_table = &range_digital; + s->insn_bits = pcmuio_dio_insn_bits; + s->insn_config = pcmuio_dio_insn_config; + + /* subdevices 0 and 2 can suppport interrupts */ + if ((i == 0 && dev->irq) || (i == 2 && devpriv->irq2)) { + /* setup the interrupt subdevice */ + dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; + s->len_chanlist = s->n_chan; + s->cancel = pcmuio_cancel; + s->do_cmd = pcmuio_cmd; + s->do_cmdtest = pcmuio_cmdtest; } - devpriv->asics[asic].irq = irq[asic]; } return 0; @@ -670,14 +669,13 @@ static int pcmuio_attach(struct comedi_device *dev, struct comedi_devconfig *it) static void pcmuio_detach(struct comedi_device *dev) { struct pcmuio_private *devpriv = dev->private; - int i; if (devpriv) { - for (i = 0; i < PCMUIO_MAX_ASICS; ++i) { - if (devpriv->asics[i].irq) - free_irq(devpriv->asics[i].irq, dev); - } - kfree(devpriv->sprivs); + pcmuio_reset(dev); + + /* free the 2nd irq if used, the core will free the 1st one */ + if (devpriv->irq2 && devpriv->irq2 != dev->irq) + free_irq(devpriv->irq2, dev); } comedi_legacy_detach(dev); } diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h index 0d254a1b78a7..55e3c2e2bc52 100644 --- a/drivers/staging/comedi/drivers/plx9080.h +++ b/drivers/staging/comedi/drivers/plx9080.h @@ -402,12 +402,9 @@ static inline int plx9080_abort_dma(void __iomem *iobase, unsigned int channel) udelay(1); dma_status = readb(dma_cs_addr); } - if (i == timeout) { - printk - ("plx9080: cancel() timed out waiting for dma %i done clear\n", - channel); + if (i == timeout) return -ETIMEDOUT; - } + /* disable and abort channel */ writeb(PLX_DMA_ABORT_BIT, dma_cs_addr); /* wait for dma done bit */ @@ -416,12 +413,8 @@ static inline int plx9080_abort_dma(void __iomem *iobase, unsigned int channel) udelay(1); dma_status = readb(dma_cs_addr); } - if (i == timeout) { - printk - ("plx9080: cancel() timed out waiting for dma %i done set\n", - channel); + if (i == timeout) return -ETIMEDOUT; - } return 0; } diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c index 44c8712ed9e0..0f026afde9be 100644 --- a/drivers/staging/comedi/drivers/rtd520.c +++ b/drivers/staging/comedi/drivers/rtd520.c @@ -495,8 +495,6 @@ static unsigned short rtd_convert_chan_gain(struct comedi_device *dev, case AREF_OTHER: /* ??? */ break; } - /*printk ("chan=%d r=%d a=%d -> 0x%x\n", - chan, range, aref, r); */ return r; } @@ -606,7 +604,6 @@ static int rtd_ai_rinsn(struct comedi_device *dev, /* read data */ d = readw(devpriv->las1 + LAS1_ADC_FIFO); - /*printk ("rtd520: Got 0x%x after %d usec\n", d, ii+1); */ d = d >> 3; /* low 3 bits are marker lines */ if (test_bit(0, devpriv->chan_is_bipolar)) /* convert to comedi unsigned data */ @@ -692,7 +689,7 @@ static int ai_read_dregs(struct comedi_device *dev, struct comedi_subdevice *s) static irqreturn_t rtd_interrupt(int irq, void *d) { struct comedi_device *dev = d; - struct comedi_subdevice *s = &dev->subdevices[0]; + struct comedi_subdevice *s = dev->read_subdev; struct rtd_private *devpriv = dev->private; u32 overrun; u16 status; @@ -1427,7 +1424,7 @@ static int rtd520_pci_probe(struct pci_dev *dev, return comedi_pci_auto_config(dev, &rtd520_driver, id->driver_data); } -static DEFINE_PCI_DEVICE_TABLE(rtd520_pci_table) = { +static const struct pci_device_id rtd520_pci_table[] = { { PCI_VDEVICE(RTD, 0x7520), BOARD_DM7520 }, { PCI_VDEVICE(RTD, 0x4520), BOARD_PCI4520 }, { 0 } diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c index b486099b543d..19da1dbea494 100644 --- a/drivers/staging/comedi/drivers/s626.c +++ b/drivers/staging/comedi/drivers/s626.c @@ -199,7 +199,7 @@ static bool s626_mc_test(struct comedi_device *dev, static const struct comedi_lrange s626_range_table = { 2, { BIP_RANGE(5), - BIP_RANGE(10), + BIP_RANGE(10) } }; @@ -1614,12 +1614,13 @@ static irqreturn_t s626_irq_handler(int irq, void *d) static void s626_reset_adc(struct comedi_device *dev, uint8_t *ppl) { struct s626_private *devpriv = dev->private; + struct comedi_subdevice *s = dev->read_subdev; + struct comedi_cmd *cmd = &s->async->cmd; uint32_t *rps; uint32_t jmp_adrs; uint16_t i; uint16_t n; uint32_t local_ppl; - struct comedi_cmd *cmd = &dev->subdevices->async->cmd; /* Stop RPS program in case it is currently running */ s626_mc_disable(dev, S626_MC1_ERPS1, S626_P_MC1); @@ -2079,12 +2080,6 @@ static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) if (cmd == NULL) return -EINVAL; - if (dev->irq == 0) { - comedi_error(dev, - "s626_ai_cmd: cannot run command without an irq"); - return -EIO; - } - s626_ai_load_polllist(ppl, cmd); devpriv->ai_cmd_running = 1; devpriv->ai_convert_count = 0; @@ -2645,6 +2640,7 @@ static void s626_initialize(struct comedi_device *dev) * a defined state after a PCI reset. */ { + struct comedi_subdevice *s = dev->read_subdev; uint8_t poll_list; uint16_t adc_data; uint16_t start_val; @@ -2656,7 +2652,7 @@ static void s626_initialize(struct comedi_device *dev) s626_reset_adc(dev, &poll_list); /* Get initial ADC value */ - s626_ai_rinsn(dev, dev->subdevices, NULL, data); + s626_ai_rinsn(dev, s, NULL, data); start_val = data[0]; /* @@ -2670,7 +2666,7 @@ static void s626_initialize(struct comedi_device *dev) * being unusually quiet or at the rail. */ for (index = 0; index < 500; index++) { - s626_ai_rinsn(dev, dev->subdevices, NULL, data); + s626_ai_rinsn(dev, s, NULL, data); adc_data = data[0]; if (adc_data != start_val) break; @@ -2833,7 +2829,7 @@ static int s626_auto_attach(struct comedi_device *dev, s = &dev->subdevices[0]; /* analog input subdevice */ s->type = COMEDI_SUBD_AI; - s->subdev_flags = SDF_READABLE | SDF_DIFF | SDF_CMD_READ; + s->subdev_flags = SDF_READABLE | SDF_DIFF; s->n_chan = S626_ADC_CHANNELS; s->maxdata = 0x3fff; s->range_table = &s626_range_table; @@ -2841,6 +2837,7 @@ static int s626_auto_attach(struct comedi_device *dev, s->insn_read = s626_ai_insn_read; if (dev->irq) { dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; s->do_cmd = s626_ai_cmd; s->do_cmdtest = s626_ai_cmdtest; s->cancel = s626_ai_cancel; @@ -2965,7 +2962,7 @@ static int s626_pci_probe(struct pci_dev *dev, * also subvendor:subdevice ids, because otherwise it will conflict with * Philips SAA7146 media/dvb based cards. */ -static DEFINE_PCI_DEVICE_TABLE(s626_pci_table) = { +static const struct pci_device_id s626_pci_table[] = { { PCI_DEVICE_SUB(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA7146, 0x6000, 0x0272) }, { 0 } diff --git a/drivers/staging/comedi/drivers/skel.c b/drivers/staging/comedi/drivers/skel.c index daee2f42bde0..77e2059ff62e 100644 --- a/drivers/staging/comedi/drivers/skel.c +++ b/drivers/staging/comedi/drivers/skel.c @@ -698,7 +698,7 @@ static int skel_pci_probe(struct pci_dev *dev, * This is used by modprobe to translate PCI IDs to drivers. * Should only be used for PCI and ISA-PnP devices */ -static DEFINE_PCI_DEVICE_TABLE(skel_pci_table) = { +static const struct pci_device_id skel_pci_table[] = { { PCI_VDEVICE(SKEL, 0x0100), BOARD_SKEL100 }, { PCI_VDEVICE(SKEL, 0x0200), BOARD_SKEL200 }, { 0 } diff --git a/drivers/staging/comedi/drivers/unioxx5.c b/drivers/staging/comedi/drivers/unioxx5.c index 93eec2fc254c..adf7cb7086cc 100644 --- a/drivers/staging/comedi/drivers/unioxx5.c +++ b/drivers/staging/comedi/drivers/unioxx5.c @@ -38,7 +38,6 @@ Devices: [Fastwel] UNIOxx-5 (unioxx5), */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/module.h> #include <linux/delay.h> @@ -91,12 +90,14 @@ static int __unioxx5_define_chan_offset(int chan_num) } #if 0 /* not used? */ -static void __unioxx5_digital_config(struct unioxx5_subd_priv *usp, int mode) +static void __unioxx5_digital_config(struct comedi_subdevice *s, int mode) { + struct unioxx5_subd_priv *usp = s->private; + struct device *csdev = s->device->class_dev; int i, mask; mask = (mode == ALL_2_OUTPUT) ? 0xFF : 0x00; - printk("COMEDI: mode = %d\n", mask); + dev_dbg(csdev, "mode = %d\n", mask); outb(1, usp->usp_iobase + 0); @@ -135,15 +136,18 @@ static void __unioxx5_analog_config(struct unioxx5_subd_priv *usp, int channel) usp->usp_prev_cn_val[channel_offset - 1] = conf; } -static int __unioxx5_digital_read(struct unioxx5_subd_priv *usp, +static int __unioxx5_digital_read(struct comedi_subdevice *s, unsigned int *data, int channel, int minor) { + struct unioxx5_subd_priv *usp = s->private; + struct device *csdev = s->device->class_dev; int channel_offset, mask = 1 << (channel & 0x07); channel_offset = __unioxx5_define_chan_offset(channel); if (channel_offset < 0) { - pr_err("comedi%d: undefined channel %d. channel range is 0 .. 23\n", - minor, channel); + dev_err(csdev, + "undefined channel %d. channel range is 0 .. 23\n", + channel); return 0; } @@ -157,9 +161,11 @@ static int __unioxx5_digital_read(struct unioxx5_subd_priv *usp, return 1; } -static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp, +static int __unioxx5_analog_read(struct comedi_subdevice *s, unsigned int *data, int channel, int minor) { + struct unioxx5_subd_priv *usp = s->private; + struct device *csdev = s->device->class_dev; int module_no, read_ch; char control; @@ -168,8 +174,9 @@ static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp, /* defining if given module can work on input */ if (usp->usp_module_type[module_no] & MODULE_OUTPUT_MASK) { - pr_err("comedi%d: module in position %d with id 0x%02x is for output only", - minor, module_no, usp->usp_module_type[module_no]); + dev_err(csdev, + "module in position %d with id 0x%02x is for output only", + module_no, usp->usp_module_type[module_no]); return 0; } @@ -185,7 +192,7 @@ static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp, /* if four bytes readding error occurs - return 0(false) */ if ((control & Rx4CA_ERR_MASK)) { - printk("COMEDI: 4 bytes error\n"); + dev_err(csdev, "4 bytes error\n"); return 0; } @@ -197,16 +204,19 @@ static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp, return 1; } -static int __unioxx5_digital_write(struct unioxx5_subd_priv *usp, +static int __unioxx5_digital_write(struct comedi_subdevice *s, unsigned int *data, int channel, int minor) { + struct unioxx5_subd_priv *usp = s->private; + struct device *csdev = s->device->class_dev; int channel_offset, val; int mask = 1 << (channel & 0x07); channel_offset = __unioxx5_define_chan_offset(channel); if (channel_offset < 0) { - pr_err("comedi%d: undefined channel %d. channel range is 0 .. 23\n", - minor, channel); + dev_err(csdev, + "undefined channel %d. channel range is 0 .. 23\n", + channel); return 0; } @@ -225,9 +235,11 @@ static int __unioxx5_digital_write(struct unioxx5_subd_priv *usp, return 1; } -static int __unioxx5_analog_write(struct unioxx5_subd_priv *usp, +static int __unioxx5_analog_write(struct comedi_subdevice *s, unsigned int *data, int channel, int minor) { + struct unioxx5_subd_priv *usp = s->private; + struct device *csdev = s->device->class_dev; int module, i; module = channel / 2; /* definig module number(0 .. 11) */ @@ -235,8 +247,9 @@ static int __unioxx5_analog_write(struct unioxx5_subd_priv *usp, /* defining if given module can work on output */ if (!(usp->usp_module_type[module] & MODULE_OUTPUT_MASK)) { - pr_err("comedi%d: module in position %d with id 0x%0x is for input only!\n", - minor, module, usp->usp_module_type[module]); + dev_err(csdev, + "module in position %d with id 0x%0x is for input only!\n", + module, usp->usp_module_type[module]); return 0; } @@ -273,10 +286,10 @@ static int unioxx5_subdev_read(struct comedi_device *dev, type = usp->usp_module_type[channel / 2]; if (type == MODULE_DIGITAL) { - if (!__unioxx5_digital_read(usp, data, channel, dev->minor)) + if (!__unioxx5_digital_read(subdev, data, channel, dev->minor)) return -1; } else { - if (!__unioxx5_analog_read(usp, data, channel, dev->minor)) + if (!__unioxx5_analog_read(subdev, data, channel, dev->minor)) return -1; } @@ -295,10 +308,10 @@ static int unioxx5_subdev_write(struct comedi_device *dev, type = usp->usp_module_type[channel / 2]; if (type == MODULE_DIGITAL) { - if (!__unioxx5_digital_write(usp, data, channel, dev->minor)) + if (!__unioxx5_digital_write(subdev, data, channel, dev->minor)) return -1; } else { - if (!__unioxx5_analog_write(usp, data, channel, dev->minor)) + if (!__unioxx5_analog_write(subdev, data, channel, dev->minor)) return -1; } @@ -318,16 +331,15 @@ static int unioxx5_insn_config(struct comedi_device *dev, if (type != MODULE_DIGITAL) { dev_err(dev->class_dev, - "comedi%d: channel configuration accessible only for digital modules\n", - dev->minor); + "channel configuration accessible only for digital modules\n"); return -1; } channel_offset = __unioxx5_define_chan_offset(channel); if (channel_offset < 0) { dev_err(dev->class_dev, - "comedi%d: undefined channel %d. channel range is 0 .. 23\n", - dev->minor, channel); + "undefined channel %d. channel range is 0 .. 23\n", + channel); return -1; } @@ -342,8 +354,7 @@ static int unioxx5_insn_config(struct comedi_device *dev, flags |= mask; break; default: - dev_err(dev->class_dev, - "comedi%d: unknown flag\n", dev->minor); + dev_err(dev->class_dev, "unknown flag\n"); return -1; } @@ -435,9 +446,10 @@ static int unioxx5_attach(struct comedi_device *dev, dev->iobase = iobase; iobase += UNIOXX5_SUBDEV_BASE; + n_subd = 0; - /* defining number of subdevices and getting they types (it must be 'g01') */ - for (i = n_subd = 0, ba = iobase; i < 4; i++, ba += UNIOXX5_SUBDEV_ODDS) { + /* getting number of subdevices with types 'g01' */ + for (i = 0, ba = iobase; i < 4; i++, ba += UNIOXX5_SUBDEV_ODDS) { id = inb(ba + 0xE); num = inb(ba + 0xF); diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index da1d501d9e4e..71db683098d6 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -80,7 +80,6 @@ sampling rate. If you sample two channels you get 4kHz and so on. #include <linux/kernel.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/input.h> #include <linux/usb.h> diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c index 9707dd1239c4..5f85c55c1109 100644 --- a/drivers/staging/comedi/drivers/usbduxfast.c +++ b/drivers/staging/comedi/drivers/usbduxfast.c @@ -37,7 +37,6 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/input.h> #include <linux/usb.h> @@ -138,7 +137,10 @@ * comedi constants */ static const struct comedi_lrange range_usbduxfast_ai_range = { - 2, {BIP_RANGE(0.75), BIP_RANGE(0.5)} + 2, { + BIP_RANGE(0.75), + BIP_RANGE(0.5) + } }; /* diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c index a5363ded3668..3beeb1254152 100644 --- a/drivers/staging/comedi/drivers/usbduxsigma.c +++ b/drivers/staging/comedi/drivers/usbduxsigma.c @@ -43,7 +43,6 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/input.h> #include <linux/usb.h> @@ -1656,11 +1655,13 @@ static int usbduxsigma_auto_attach(struct comedi_device *dev, } offset = usbduxsigma_getstatusinfo(dev, 0); - if (offset < 0) + if (offset < 0) { dev_err(dev->class_dev, - "Communication to USBDUXSIGMA failed! Check firmware and cabling\n"); + "Communication to USBDUXSIGMA failed! Check firmware and cabling.\n"); + return offset; + } - dev_info(dev->class_dev, "attached, ADC_zero = %x\n", offset); + dev_info(dev->class_dev, "ADC_zero = %x\n", offset); return 0; } |