diff options
Diffstat (limited to 'drivers/staging/csr/sdio_mmc.c')
-rw-r--r-- | drivers/staging/csr/sdio_mmc.c | 1288 |
1 files changed, 0 insertions, 1288 deletions
diff --git a/drivers/staging/csr/sdio_mmc.c b/drivers/staging/csr/sdio_mmc.c deleted file mode 100644 index 2b503c23efae..000000000000 --- a/drivers/staging/csr/sdio_mmc.c +++ /dev/null @@ -1,1288 +0,0 @@ -/* - * --------------------------------------------------------------------------- - * - * FILE: sdio_mmc.c - * - * PURPOSE: SDIO driver interface for generic MMC stack. - * - * Copyright (C) 2008-2009 by Cambridge Silicon Radio Ltd. - * - * --------------------------------------------------------------------------- - */ -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/mutex.h> -#include <linux/gfp.h> -#include <linux/mmc/core.h> -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> -#include <linux/mmc/sdio_func.h> -#include <linux/mmc/sdio_ids.h> -#include <linux/mmc/sdio.h> -#include <linux/suspend.h> - -#include "unifi_priv.h" - -#ifdef ANDROID_BUILD -struct wake_lock unifi_sdio_wake_lock; /* wakelock to prevent suspend while resuming */ -#endif - -static CsrSdioFunctionDriver *sdio_func_drv; - -#ifdef CONFIG_PM -static int uf_sdio_mmc_power_event(struct notifier_block *this, unsigned long event, void *ptr); -#endif - -/* - * We need to keep track of the power on/off because we can not call - * mmc_power_restore_host() when the card is already powered. - * Even then, we need to patch the MMC driver to add a power_restore handler - * in the mmc_sdio_ops structure. If the MMC driver before 2.6.37 is not patched, - * mmc_power_save_host() and mmc_power_restore_host() are no-ops in the kernel, - * returning immediately (at least on x86). - */ -static int card_is_powered = 1; - -/* MMC uses ENOMEDIUM to indicate card gone away */ - -static CsrResult -ConvertSdioToCsrSdioResult(int r) -{ - CsrResult csrResult = CSR_RESULT_FAILURE; - - switch (r) { - case 0: - csrResult = CSR_RESULT_SUCCESS; - break; - case -EIO: - case -EILSEQ: - csrResult = CSR_SDIO_RESULT_CRC_ERROR; - break; - /* Timeout errors */ - case -ETIMEDOUT: - case -EBUSY: - csrResult = CSR_SDIO_RESULT_TIMEOUT; - break; - case -ENODEV: - case -ENOMEDIUM: - csrResult = CSR_SDIO_RESULT_NO_DEVICE; - break; - case -EINVAL: - csrResult = CSR_SDIO_RESULT_INVALID_VALUE; - break; - case -ENOMEM: - case -ENOSYS: - case -ERANGE: - case -ENXIO: - csrResult = CSR_RESULT_FAILURE; - break; - default: - unifi_warning(NULL, "Unrecognised SDIO error code: %d\n", r); - break; - } - - return csrResult; -} - - -static int -csr_io_rw_direct(struct mmc_card *card, int write, uint8_t fn, - uint32_t addr, uint8_t in, uint8_t* out) -{ - struct mmc_command cmd; - int err; - - BUG_ON(!card); - BUG_ON(fn > 7); - - memset(&cmd, 0, sizeof(struct mmc_command)); - - cmd.opcode = SD_IO_RW_DIRECT; - cmd.arg = write ? 0x80000000 : 0x00000000; - cmd.arg |= fn << 28; - cmd.arg |= (write && out) ? 0x08000000 : 0x00000000; - cmd.arg |= addr << 9; - cmd.arg |= in; - cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC; - - err = mmc_wait_for_cmd(card->host, &cmd, 0); - if (err) - return err; - - /* this function is not exported, so we will need to sort it out here - * for now, lets hard code it to sdio */ - if (0) { - /* old arg (mmc_host_is_spi(card->host)) { */ - /* host driver already reported errors */ - } else { - if (cmd.resp[0] & R5_ERROR) { - printk(KERN_ERR "%s: r5 error 0x%02x\n", - __FUNCTION__, cmd.resp[0]); - return -EIO; - } - if (cmd.resp[0] & R5_FUNCTION_NUMBER) - return -EINVAL; - if (cmd.resp[0] & R5_OUT_OF_RANGE) - return -ERANGE; - } - - if (out) { - if (0) { /* old argument (mmc_host_is_spi(card->host)) */ - *out = (cmd.resp[0] >> 8) & 0xFF; - } - else { - *out = cmd.resp[0] & 0xFF; - } - } - - return CSR_RESULT_SUCCESS; -} - - -CsrResult -CsrSdioRead8(CsrSdioFunction *function, u32 address, u8 *data) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - int err = 0; - - _sdio_claim_host(func); - *data = sdio_readb(func, address, &err); - _sdio_release_host(func); - - if (err) { - return ConvertSdioToCsrSdioResult(err); - } - - return CSR_RESULT_SUCCESS; -} /* CsrSdioRead8() */ - -CsrResult -CsrSdioWrite8(CsrSdioFunction *function, u32 address, u8 data) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - int err = 0; - - _sdio_claim_host(func); - sdio_writeb(func, data, address, &err); - _sdio_release_host(func); - - if (err) { - return ConvertSdioToCsrSdioResult(err); - } - - return CSR_RESULT_SUCCESS; -} /* CsrSdioWrite8() */ - -CsrResult -CsrSdioRead16(CsrSdioFunction *function, u32 address, u16 *data) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - int err; - uint8_t b0, b1; - - _sdio_claim_host(func); - b0 = sdio_readb(func, address, &err); - if (err) { - _sdio_release_host(func); - return ConvertSdioToCsrSdioResult(err); - } - - b1 = sdio_readb(func, address+1, &err); - if (err) { - _sdio_release_host(func); - return ConvertSdioToCsrSdioResult(err); - } - _sdio_release_host(func); - - *data = ((uint16_t)b1 << 8) | b0; - - return CSR_RESULT_SUCCESS; -} /* CsrSdioRead16() */ - - -CsrResult -CsrSdioWrite16(CsrSdioFunction *function, u32 address, u16 data) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - int err; - uint8_t b0, b1; - - _sdio_claim_host(func); - b1 = (data >> 8) & 0xFF; - sdio_writeb(func, b1, address+1, &err); - if (err) { - _sdio_release_host(func); - return ConvertSdioToCsrSdioResult(err); - } - - b0 = data & 0xFF; - sdio_writeb(func, b0, address, &err); - if (err) { - _sdio_release_host(func); - return ConvertSdioToCsrSdioResult(err); - } - - _sdio_release_host(func); - return CSR_RESULT_SUCCESS; -} /* CsrSdioWrite16() */ - - -CsrResult -CsrSdioF0Read8(CsrSdioFunction *function, u32 address, u8 *data) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - int err = 0; - - _sdio_claim_host(func); -#ifdef MMC_QUIRK_LENIENT_FN0 - *data = sdio_f0_readb(func, address, &err); -#else - err = csr_io_rw_direct(func->card, 0, 0, address, 0, data); -#endif - _sdio_release_host(func); - - if (err) { - return ConvertSdioToCsrSdioResult(err); - } - - return CSR_RESULT_SUCCESS; -} /* CsrSdioF0Read8() */ - -CsrResult -CsrSdioF0Write8(CsrSdioFunction *function, u32 address, u8 data) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - int err = 0; - - _sdio_claim_host(func); -#ifdef MMC_QUIRK_LENIENT_FN0 - sdio_f0_writeb(func, data, address, &err); -#else - err = csr_io_rw_direct(func->card, 1, 0, address, data, NULL); -#endif - _sdio_release_host(func); - - if (err) { - return ConvertSdioToCsrSdioResult(err); - } - - return CSR_RESULT_SUCCESS; -} /* CsrSdioF0Write8() */ - - -CsrResult -CsrSdioRead(CsrSdioFunction *function, u32 address, void *data, u32 length) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - int err; - - _sdio_claim_host(func); - err = sdio_readsb(func, data, address, length); - _sdio_release_host(func); - - if (err) { - return ConvertSdioToCsrSdioResult(err); - } - - return CSR_RESULT_SUCCESS; -} /* CsrSdioRead() */ - -CsrResult -CsrSdioWrite(CsrSdioFunction *function, u32 address, const void *data, u32 length) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - int err; - - _sdio_claim_host(func); - err = sdio_writesb(func, address, (void*)data, length); - _sdio_release_host(func); - - if (err) { - return ConvertSdioToCsrSdioResult(err); - } - - return CSR_RESULT_SUCCESS; -} /* CsrSdioWrite() */ - - -static int -csr_sdio_enable_hs(struct mmc_card *card) -{ - int ret; - u8 speed; - - if (!(card->host->caps & MMC_CAP_SD_HIGHSPEED)) { - /* We've asked for HS clock rates, but controller doesn't - * claim to support it. We should limit the clock - * to 25MHz via module parameter. - */ - printk(KERN_INFO "unifi: request HS but not MMC_CAP_SD_HIGHSPEED"); - return 0; - } - - if (!card->cccr.high_speed) - return 0; - -#if 1 - ret = csr_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed); - if (ret) - return ret; - - speed |= SDIO_SPEED_EHS; -#else - /* Optimisation: Eliminate read by always assuming SHS and that reserved bits can be zero */ - speed = SDIO_SPEED_EHS | SDIO_SPEED_SHS; -#endif - - ret = csr_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL); - if (ret) - return ret; - - mmc_card_set_highspeed(card); - card->host->ios.timing = MMC_TIMING_SD_HS; - card->host->ops->set_ios(card->host, &card->host->ios); - - return 0; -} - -static int -csr_sdio_disable_hs(struct mmc_card *card) -{ - int ret; - u8 speed; - - if (!(card->host->caps & MMC_CAP_SD_HIGHSPEED)) - return 0; - - if (!card->cccr.high_speed) - return 0; -#if 1 - ret = csr_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed); - if (ret) - return ret; - - speed &= ~SDIO_SPEED_EHS; -#else - /* Optimisation: Eliminate read by always assuming SHS and that reserved bits can be zero */ - speed = SDIO_SPEED_SHS; /* clear SDIO_SPEED_EHS */ -#endif - - ret = csr_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL); - if (ret) - return ret; - - card->state &= ~MMC_STATE_HIGHSPEED; - card->host->ios.timing = MMC_TIMING_LEGACY; - card->host->ops->set_ios(card->host, &card->host->ios); - - return 0; -} - - -/* - * --------------------------------------------------------------------------- - * CsrSdioMaxBusClockFrequencySet - * - * Set the maximum SDIO bus clock speed to use. - * - * Arguments: - * sdio SDIO context pointer - * maxFrequency maximum clock speed in Hz - * - * Returns: - * an error code. - * --------------------------------------------------------------------------- - */ -CsrResult -CsrSdioMaxBusClockFrequencySet(CsrSdioFunction *function, u32 maxFrequency) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - struct mmc_host *host = func->card->host; - struct mmc_ios *ios = &host->ios; - unsigned int max_hz; - int err; - u32 max_khz = maxFrequency/1000; - - if (!max_khz || max_khz > sdio_clock) { - max_khz = sdio_clock; - } - - _sdio_claim_host(func); - max_hz = 1000 * max_khz; - if (max_hz > host->f_max) { - max_hz = host->f_max; - } - - if (max_hz > 25000000) { - err = csr_sdio_enable_hs(func->card); - } else { - err = csr_sdio_disable_hs(func->card); - } - if (err) { - printk(KERN_ERR "SDIO warning: Failed to configure SDIO clock mode\n"); - _sdio_release_host(func); - return CSR_RESULT_SUCCESS; - } - - ios->clock = max_hz; - host->ops->set_ios(host, ios); - - _sdio_release_host(func); - - return CSR_RESULT_SUCCESS; -} /* CsrSdioMaxBusClockFrequencySet() */ - - -/* - * --------------------------------------------------------------------------- - * CsrSdioInterruptEnable - * CsrSdioInterruptDisable - * - * Enable or disable the SDIO interrupt. - * The driver disables the SDIO interrupt until the i/o thread can - * process it. - * The SDIO interrupt can be disabled by modifying the SDIO_INT_ENABLE - * register in the Card Common Control Register block, but this requires - * two CMD52 operations. A better solution is to mask the interrupt at - * the host controller. - * - * Arguments: - * sdio SDIO context pointer - * - * Returns: - * Zero on success or a UniFi driver error code. - * - * --------------------------------------------------------------------------- - */ -CsrResult -CsrSdioInterruptEnable(CsrSdioFunction *function) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - int err = 0; - -#ifdef CSR_CONFIG_MMC_INT_BYPASS_KSOFTIRQD - sdio_unblock_card_irq(func); -#else - _sdio_claim_host(func); - /* Write the Int Enable in CCCR block */ -#ifdef MMC_QUIRK_LENIENT_FN0 - sdio_f0_writeb(func, 0x3, SDIO_CCCR_IENx, &err); -#else - err = csr_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IENx, 0x03, NULL); -#endif - _sdio_release_host(func); - - if (err) { - printk(KERN_ERR "unifi: %s: error %d writing IENx\n", __FUNCTION__, err); - return ConvertSdioToCsrSdioResult(err); - } -#endif - return CSR_RESULT_SUCCESS; -} /* CsrSdioInterruptEnable() */ - -CsrResult -CsrSdioInterruptDisable(CsrSdioFunction *function) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - int err = 0; - -#ifdef CSR_CONFIG_MMC_INT_BYPASS_KSOFTIRQD - sdio_block_card_irq(func); -#else - _sdio_claim_host(func); - /* Write the Int Enable in CCCR block */ -#ifdef MMC_QUIRK_LENIENT_FN0 - sdio_f0_writeb(func, 0, SDIO_CCCR_IENx, &err); -#else - err = csr_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IENx, 0x00, NULL); -#endif - _sdio_release_host(func); - - if (err) { - printk(KERN_ERR "unifi: %s: error %d writing IENx\n", __FUNCTION__, err); - return ConvertSdioToCsrSdioResult(err); - } -#endif - return CSR_RESULT_SUCCESS; -} /* CsrSdioInterruptDisable() */ - - -void CsrSdioInterruptAcknowledge(CsrSdioFunction *function) -{ -} - - -/* - * --------------------------------------------------------------------------- - * CsrSdioFunctionEnable - * - * Enable i/o on function 1. - * - * Arguments: - * sdio SDIO context pointer - * - * Returns: - * UniFi driver error code. - * --------------------------------------------------------------------------- - */ -CsrResult -CsrSdioFunctionEnable(CsrSdioFunction *function) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - int err; - - /* Enable UniFi function 1 (the 802.11 part). */ - _sdio_claim_host(func); - err = sdio_enable_func(func); - _sdio_release_host(func); - if (err) { - unifi_error(NULL, "Failed to enable SDIO function %d\n", func->num); - } - - return ConvertSdioToCsrSdioResult(err); -} /* CsrSdioFunctionEnable() */ - - -/* - * --------------------------------------------------------------------------- - * CsrSdioFunctionDisable - * - * Enable i/o on function 1. - * - * Arguments: - * sdio SDIO context pointer - * - * Returns: - * UniFi driver error code. - * --------------------------------------------------------------------------- - */ -CsrResult -CsrSdioFunctionDisable(CsrSdioFunction *function) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - int err; - - /* Disable UniFi function 1 (the 802.11 part). */ - _sdio_claim_host(func); - err = sdio_disable_func(func); - _sdio_release_host(func); - if (err) { - unifi_error(NULL, "Failed to disable SDIO function %d\n", func->num); - } - - return ConvertSdioToCsrSdioResult(err); -} /* CsrSdioFunctionDisable() */ - - -/* - * --------------------------------------------------------------------------- - * CsrSdioFunctionActive - * - * No-op as the bus goes to an active state at the start of every - * command. - * - * Arguments: - * sdio SDIO context pointer - * --------------------------------------------------------------------------- - */ -void -CsrSdioFunctionActive(CsrSdioFunction *function) -{ -} /* CsrSdioFunctionActive() */ - -/* - * --------------------------------------------------------------------------- - * CsrSdioFunctionIdle - * - * Set the function as idle. - * - * Arguments: - * sdio SDIO context pointer - * --------------------------------------------------------------------------- - */ -void -CsrSdioFunctionIdle(CsrSdioFunction *function) -{ -} /* CsrSdioFunctionIdle() */ - - -/* - * --------------------------------------------------------------------------- - * CsrSdioPowerOn - * - * Power on UniFi. - * - * Arguments: - * sdio SDIO context pointer - * --------------------------------------------------------------------------- - */ -CsrResult -CsrSdioPowerOn(CsrSdioFunction *function) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - struct mmc_host *host = func->card->host; - - _sdio_claim_host(func); - if (!card_is_powered) { - mmc_power_restore_host(host); - card_is_powered = 1; - } else { - printk(KERN_INFO "SDIO: Skip power on; card is already powered.\n"); - } - _sdio_release_host(func); - - return CSR_RESULT_SUCCESS; -} /* CsrSdioPowerOn() */ - -/* - * --------------------------------------------------------------------------- - * CsrSdioPowerOff - * - * Power off UniFi. - * - * Arguments: - * sdio SDIO context pointer - * --------------------------------------------------------------------------- - */ -void -CsrSdioPowerOff(CsrSdioFunction *function) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - struct mmc_host *host = func->card->host; - - _sdio_claim_host(func); - if (card_is_powered) { - mmc_power_save_host(host); - card_is_powered = 0; - } else { - printk(KERN_INFO "SDIO: Skip power off; card is already powered off.\n"); - } - _sdio_release_host(func); -} /* CsrSdioPowerOff() */ - - -static int -sdio_set_block_size_ignore_first_error(struct sdio_func *func, unsigned blksz) -{ - int ret; - - if (blksz > func->card->host->max_blk_size) - return -EINVAL; - - if (blksz == 0) { - blksz = min(func->max_blksize, func->card->host->max_blk_size); - blksz = min(blksz, 512u); - } - - /* - * Ignore -ERANGE (OUT_OF_RANGE in R5) on the first byte as - * the block size may be invalid until both bytes are written. - */ - ret = csr_io_rw_direct(func->card, 1, 0, - SDIO_FBR_BASE(func->num) + SDIO_FBR_BLKSIZE, - blksz & 0xff, NULL); - if (ret && ret != -ERANGE) - return ret; - ret = csr_io_rw_direct(func->card, 1, 0, - SDIO_FBR_BASE(func->num) + SDIO_FBR_BLKSIZE + 1, - (blksz >> 8) & 0xff, NULL); - if (ret) - return ret; - func->cur_blksize = blksz; - - return 0; -} - -CsrResult -CsrSdioBlockSizeSet(CsrSdioFunction *function, u16 blockSize) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - int r = 0; - - /* Module parameter overrides */ - if (sdio_block_size > -1) { - blockSize = sdio_block_size; - } - - unifi_trace(NULL, UDBG1, "Set SDIO function block size to %d\n", - blockSize); - - _sdio_claim_host(func); - r = sdio_set_block_size(func, blockSize); - _sdio_release_host(func); - - /* - * The MMC driver for kernels prior to 2.6.32 may fail this request - * with -ERANGE. In this case use our workaround. - */ - if (r == -ERANGE) { - _sdio_claim_host(func); - r = sdio_set_block_size_ignore_first_error(func, blockSize); - _sdio_release_host(func); - } - if (r) { - unifi_error(NULL, "Error %d setting block size\n", r); - } - - /* Determine the achieved block size to pass to the core */ - function->blockSize = func->cur_blksize; - - return ConvertSdioToCsrSdioResult(r); -} /* CsrSdioBlockSizeSet() */ - - -/* - * --------------------------------------------------------------------------- - * CsrSdioHardReset - * - * Hard Resets UniFi is possible. - * - * Arguments: - * sdio SDIO context pointer - * --------------------------------------------------------------------------- - */ -CsrResult -CsrSdioHardReset(CsrSdioFunction *function) -{ - return CSR_RESULT_FAILURE; -} /* CsrSdioHardReset() */ - - - -/* - * --------------------------------------------------------------------------- - * uf_glue_sdio_int_handler - * - * Interrupt callback function for SDIO interrupts. - * This is called in kernel context (i.e. not interrupt context). - * - * Arguments: - * func SDIO context pointer - * - * Returns: - * None. - * - * Note: Called with host already claimed. - * --------------------------------------------------------------------------- - */ -static void -uf_glue_sdio_int_handler(struct sdio_func *func) -{ - CsrSdioFunction *sdio_ctx; - CsrSdioInterruptDsrCallback func_dsr_callback; - int r; - - sdio_ctx = sdio_get_drvdata(func); - if (!sdio_ctx) { - return; - } - -#ifndef CSR_CONFIG_MMC_INT_BYPASS_KSOFTIRQD - /* - * Normally, we are not allowed to do any SDIO commands here. - * However, this is called in a thread context and with the SDIO lock - * so we disable the interrupts here instead of trying to do complicated - * things with the SDIO lock. - */ -#ifdef MMC_QUIRK_LENIENT_FN0 - sdio_f0_writeb(func, 0, SDIO_CCCR_IENx, &r); -#else - r = csr_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IENx, 0x00, NULL); -#endif - if (r) { - printk(KERN_ERR "UniFi MMC Int handler: Failed to disable interrupts %d\n", r); - } -#endif - - /* If the function driver has registered a handler, call it */ - if (sdio_func_drv && sdio_func_drv->intr) { - - func_dsr_callback = sdio_func_drv->intr(sdio_ctx); - - /* If interrupt handle returns a DSR handle, call it */ - if (func_dsr_callback) { - func_dsr_callback(sdio_ctx); - } - } - -} /* uf_glue_sdio_int_handler() */ - - - -/* - * --------------------------------------------------------------------------- - * csr_sdio_linux_remove_irq - * - * Unregister the interrupt handler. - * This means that the linux layer can not process interrupts any more. - * - * Arguments: - * sdio SDIO context pointer - * - * Returns: - * Status of the removal. - * --------------------------------------------------------------------------- - */ -int csr_sdio_linux_remove_irq(CsrSdioFunction *function) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - int r; - - unifi_trace(NULL, UDBG1, "csr_sdio_linux_remove_irq\n"); - - sdio_claim_host(func); - r = sdio_release_irq(func); - sdio_release_host(func); - - return r; - -} /* csr_sdio_linux_remove_irq() */ - - -/* - * --------------------------------------------------------------------------- - * csr_sdio_linux_install_irq - * - * Register the interrupt handler. - * This means that the linux layer can process interrupts. - * - * Arguments: - * sdio SDIO context pointer - * - * Returns: - * Status of the removal. - * --------------------------------------------------------------------------- - */ -int csr_sdio_linux_install_irq(CsrSdioFunction *function) -{ - struct sdio_func *func = (struct sdio_func *)function->priv; - int r; - - unifi_trace(NULL, UDBG1, "csr_sdio_linux_install_irq\n"); - - /* Register our interrupt handle */ - sdio_claim_host(func); - r = sdio_claim_irq(func, uf_glue_sdio_int_handler); - sdio_release_host(func); - - /* If the interrupt was installed earlier, is fine */ - if (r == -EBUSY) - r = 0; - - return r; -} /* csr_sdio_linux_install_irq() */ - -#ifdef CONFIG_PM - -/* - * Power Management notifier - */ -struct uf_sdio_mmc_pm_notifier -{ - struct list_head list; - - CsrSdioFunction *sdio_ctx; - struct notifier_block pm_notifier; -}; - -/* PM notifier list head */ -static struct uf_sdio_mmc_pm_notifier uf_sdio_mmc_pm_notifiers = { - .sdio_ctx = NULL, -}; - -/* - * --------------------------------------------------------------------------- - * uf_sdio_mmc_register_pm_notifier - * uf_sdio_mmc_unregister_pm_notifier - * - * Register/unregister for power management events. A list is used to - * allow multiple card instances to be supported. - * - * Arguments: - * sdio_ctx - CSR SDIO context to associate PM notifier to - * - * Returns: - * Register function returns NULL on error - * --------------------------------------------------------------------------- - */ -static struct uf_sdio_mmc_pm_notifier * -uf_sdio_mmc_register_pm_notifier(CsrSdioFunction *sdio_ctx) -{ - /* Allocate notifier context for this card instance */ - struct uf_sdio_mmc_pm_notifier *notifier_ctx = kmalloc(sizeof(struct uf_sdio_mmc_pm_notifier), GFP_KERNEL); - - if (notifier_ctx) - { - notifier_ctx->sdio_ctx = sdio_ctx; - notifier_ctx->pm_notifier.notifier_call = uf_sdio_mmc_power_event; - - list_add(¬ifier_ctx->list, &uf_sdio_mmc_pm_notifiers.list); - - if (register_pm_notifier(¬ifier_ctx->pm_notifier)) { - printk(KERN_ERR "unifi: register_pm_notifier failed\n"); - } - } - - return notifier_ctx; -} - -static void -uf_sdio_mmc_unregister_pm_notifier(CsrSdioFunction *sdio_ctx) -{ - struct uf_sdio_mmc_pm_notifier *notifier_ctx; - struct list_head *node, *q; - - list_for_each_safe(node, q, &uf_sdio_mmc_pm_notifiers.list) { - notifier_ctx = list_entry(node, struct uf_sdio_mmc_pm_notifier, list); - - /* If it matches, unregister and free the notifier context */ - if (notifier_ctx && notifier_ctx->sdio_ctx == sdio_ctx) - { - if (unregister_pm_notifier(¬ifier_ctx->pm_notifier)) { - printk(KERN_ERR "unifi: unregister_pm_notifier failed\n"); - } - - /* Remove from list */ - notifier_ctx->sdio_ctx = NULL; - list_del(node); - kfree(notifier_ctx); - } - } -} - -/* - * --------------------------------------------------------------------------- - * uf_sdio_mmc_power_event - * - * Handler for power management events. - * - * We need to handle suspend/resume events while the userspace is unsuspended - * to allow the SME to run its suspend/resume state machines. - * - * Arguments: - * event event ID - * - * Returns: - * Status of the event handling - * --------------------------------------------------------------------------- - */ -static int -uf_sdio_mmc_power_event(struct notifier_block *this, unsigned long event, void *ptr) -{ - struct uf_sdio_mmc_pm_notifier *notifier_ctx = container_of(this, - struct uf_sdio_mmc_pm_notifier, - pm_notifier); - - /* Call the CSR SDIO function driver's suspend/resume method - * while the userspace is unsuspended. - */ - switch (event) { - case PM_POST_HIBERNATION: - case PM_POST_SUSPEND: - printk(KERN_INFO "%s:%d resume\n", __FUNCTION__, __LINE__ ); - if (sdio_func_drv && sdio_func_drv->resume) { - sdio_func_drv->resume(notifier_ctx->sdio_ctx); - } - break; - - case PM_HIBERNATION_PREPARE: - case PM_SUSPEND_PREPARE: - printk(KERN_INFO "%s:%d suspend\n", __FUNCTION__, __LINE__ ); - if (sdio_func_drv && sdio_func_drv->suspend) { - sdio_func_drv->suspend(notifier_ctx->sdio_ctx); - } - break; - } - return NOTIFY_DONE; -} - -#endif /* CONFIG_PM */ - -/* - * --------------------------------------------------------------------------- - * uf_glue_sdio_probe - * - * Card insert callback. - * - * Arguments: - * func Our (glue layer) context pointer. - * - * Returns: - * UniFi driver error code. - * --------------------------------------------------------------------------- - */ -static int -uf_glue_sdio_probe(struct sdio_func *func, - const struct sdio_device_id *id) -{ - int instance; - CsrSdioFunction *sdio_ctx; - - /* First of all claim the SDIO driver */ - sdio_claim_host(func); - - /* Assume that the card is already powered */ - card_is_powered = 1; - - /* Assumes one card per host, which is true for SDIO */ - instance = func->card->host->index; - printk("sdio bus_id: %16s - UniFi card 0x%X inserted\n", - sdio_func_id(func), instance); - - /* Allocate context */ - sdio_ctx = kmalloc(sizeof(CsrSdioFunction), GFP_KERNEL); - if (sdio_ctx == NULL) { - sdio_release_host(func); - return -ENOMEM; - } - - /* Initialise the context */ - sdio_ctx->sdioId.manfId = func->vendor; - sdio_ctx->sdioId.cardId = func->device; - sdio_ctx->sdioId.sdioFunction = func->num; - sdio_ctx->sdioId.sdioInterface = func->class; - sdio_ctx->blockSize = func->cur_blksize; - sdio_ctx->priv = (void *)func; - sdio_ctx->features = 0; - - /* Module parameter enables byte mode */ - if (sdio_byte_mode) { - sdio_ctx->features |= CSR_SDIO_FEATURE_BYTE_MODE; - } - - if (func->card->host->caps & MMC_CAP_SD_HIGHSPEED) { - unifi_trace(NULL, UDBG1, "MMC_CAP_SD_HIGHSPEED is available\n"); - } - -#ifdef MMC_QUIRK_LENIENT_FN0 - func->card->quirks |= MMC_QUIRK_LENIENT_FN0; -#endif - - /* Pass context to the SDIO driver */ - sdio_set_drvdata(func, sdio_ctx); - -#ifdef CONFIG_PM - /* Register to get PM events */ - if (uf_sdio_mmc_register_pm_notifier(sdio_ctx) == NULL) { - unifi_error(NULL, "%s: Failed to register for PM events\n", __FUNCTION__); - } -#endif - - /* Register this device with the SDIO function driver */ - /* Call the main UniFi driver inserted handler */ - if (sdio_func_drv && sdio_func_drv->inserted) { - uf_add_os_device(instance, &func->dev); - sdio_func_drv->inserted(sdio_ctx); - } - - /* We have finished, so release the SDIO driver */ - sdio_release_host(func); - -#ifdef ANDROID_BUILD - /* Take the wakelock */ - unifi_trace(NULL, UDBG1, "probe: take wake lock\n"); - wake_lock(&unifi_sdio_wake_lock); -#endif - - return 0; -} /* uf_glue_sdio_probe() */ - - -/* - * --------------------------------------------------------------------------- - * uf_glue_sdio_remove - * - * Card removal callback. - * - * Arguments: - * func Our (glue layer) context pointer. - * - * Returns: - * UniFi driver error code. - * --------------------------------------------------------------------------- - */ -static void -uf_glue_sdio_remove(struct sdio_func *func) -{ - CsrSdioFunction *sdio_ctx; - - sdio_ctx = sdio_get_drvdata(func); - if (!sdio_ctx) { - return; - } - - unifi_info(NULL, "UniFi card removed\n"); - - /* Clean up the SDIO function driver */ - if (sdio_func_drv && sdio_func_drv->removed) { - uf_remove_os_device(func->card->host->index); - sdio_func_drv->removed(sdio_ctx); - } - -#ifdef CONFIG_PM - /* Unregister for PM events */ - uf_sdio_mmc_unregister_pm_notifier(sdio_ctx); -#endif - - kfree(sdio_ctx); - -} /* uf_glue_sdio_remove */ - - -/* - * SDIO ids *must* be statically declared, so we can't take - * them from the list passed in csr_sdio_register_driver(). - */ -static const struct sdio_device_id unifi_ids[] = { - { SDIO_DEVICE(SDIO_MANF_ID_CSR, SDIO_CARD_ID_UNIFI_3) }, - { SDIO_DEVICE(SDIO_MANF_ID_CSR, SDIO_CARD_ID_UNIFI_4) }, - { /* end: all zeroes */ }, -}; - -MODULE_DEVICE_TABLE(sdio, unifi_ids); - -#ifdef CONFIG_PM - -/* - * --------------------------------------------------------------------------- - * uf_glue_sdio_suspend - * - * Card suspend callback. The userspace will already be suspended. - * - * Arguments: - * dev The struct device owned by the MMC driver - * - * Returns: - * None - * --------------------------------------------------------------------------- - */ -static int -uf_glue_sdio_suspend(struct device *dev) -{ - unifi_trace(NULL, UDBG1, "uf_glue_sdio_suspend"); - - return 0; -} /* uf_glue_sdio_suspend */ - - -/* - * --------------------------------------------------------------------------- - * uf_glue_sdio_resume - * - * Card resume callback. The userspace will still be suspended. - * - * Arguments: - * dev The struct device owned by the MMC driver - * - * Returns: - * None - * --------------------------------------------------------------------------- - */ -static int -uf_glue_sdio_resume(struct device *dev) -{ - unifi_trace(NULL, UDBG1, "uf_glue_sdio_resume"); - -#ifdef ANDROID_BUILD - unifi_trace(NULL, UDBG1, "resume: take wakelock\n"); - wake_lock(&unifi_sdio_wake_lock); -#endif - - return 0; - -} /* uf_glue_sdio_resume */ - -static struct dev_pm_ops unifi_pm_ops = { - .suspend = uf_glue_sdio_suspend, - .resume = uf_glue_sdio_resume, -}; - -#define UNIFI_PM_OPS (&unifi_pm_ops) - -#else - -#define UNIFI_PM_OPS NULL - -#endif /* CONFIG_PM */ - -static struct sdio_driver unifi_driver = { - .probe = uf_glue_sdio_probe, - .remove = uf_glue_sdio_remove, - .name = "unifi", - .id_table = unifi_ids, - .drv.pm = UNIFI_PM_OPS, -}; - - -/* - * --------------------------------------------------------------------------- - * CsrSdioFunctionDriverRegister - * CsrSdioFunctionDriverUnregister - * - * These functions are called from the main module load and unload - * functions. They perform the appropriate operations for the - * linux MMC/SDIO driver. - * - * Arguments: - * sdio_drv Pointer to the function driver's SDIO structure. - * - * Returns: - * None. - * --------------------------------------------------------------------------- - */ -CsrResult -CsrSdioFunctionDriverRegister(CsrSdioFunctionDriver *sdio_drv) -{ - int r; - - printk("UniFi: Using native Linux MMC driver for SDIO.\n"); - - if (sdio_func_drv) { - unifi_error(NULL, "sdio_mmc: UniFi driver already registered\n"); - return CSR_SDIO_RESULT_INVALID_VALUE; - } - -#ifdef ANDROID_BUILD - wake_lock_init(&unifi_sdio_wake_lock, WAKE_LOCK_SUSPEND, "unifi_sdio_work"); -#endif - - /* Save the registered driver description */ - /* - * FIXME: - * Need a table here to handle a call to register for just one function. - * mmc only allows us to register for the whole device - */ - sdio_func_drv = sdio_drv; - -#ifdef CONFIG_PM - /* Initialise PM notifier list */ - INIT_LIST_HEAD(&uf_sdio_mmc_pm_notifiers.list); -#endif - - /* Register ourself with mmc_core */ - r = sdio_register_driver(&unifi_driver); - if (r) { - printk(KERN_ERR "unifi_sdio: Failed to register UniFi SDIO driver: %d\n", r); - return ConvertSdioToCsrSdioResult(r); - } - - return CSR_RESULT_SUCCESS; -} /* CsrSdioFunctionDriverRegister() */ - - - -void -CsrSdioFunctionDriverUnregister(CsrSdioFunctionDriver *sdio_drv) -{ - printk(KERN_INFO "UniFi: unregister from MMC sdio\n"); - -#ifdef ANDROID_BUILD - wake_lock_destroy(&unifi_sdio_wake_lock); -#endif - sdio_unregister_driver(&unifi_driver); - - sdio_func_drv = NULL; - -} /* CsrSdioFunctionDriverUnregister() */ - |