1 files changed, 0 insertions, 302 deletions
diff --git a/drivers/staging/fbtft/fb_watterott.c b/drivers/staging/fbtft/fb_watterott.c
deleted file mode 100644
index a57e1f4feef3..000000000000
--- a/drivers/staging/fbtft/fb_watterott.c
+++ /dev/null
@@ -1,302 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * FB driver for the Watterott LCD Controller
- *
- * Copyright (C) 2013 Noralf Tronnes
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include "fbtft.h"
-
-#define DRVNAME			"fb_watterott"
-#define WIDTH			320
-#define HEIGHT			240
-#define FPS			5
-#define TXBUFLEN		1024
-#define DEFAULT_BRIGHTNESS	50
-
-#define CMD_VERSION		0x01
-#define CMD_LCD_LED		0x10
-#define CMD_LCD_RESET		0x11
-#define CMD_LCD_ORIENTATION	0x20
-#define CMD_LCD_DRAWIMAGE	0x27
-#define COLOR_RGB323		8
-#define COLOR_RGB332		9
-#define COLOR_RGB233		10
-#define COLOR_RGB565		16
-
-static short mode = 565;
-module_param(mode, short, 0000);
-MODULE_PARM_DESC(mode, "RGB color transfer mode: 332, 565 (default)");
-
-static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
-{
-	va_list args;
-	int i, ret;
-	u8 *buf = par->buf;
-
-	va_start(args, len);
-	for (i = 0; i < len; i++)
-		*buf++ = (u8)va_arg(args, unsigned int);
-	va_end(args);
-
-	fbtft_par_dbg_hex(DEBUG_WRITE_REGISTER, par,
-			  par->info->device, u8, par->buf,
-			  len, "%s: ", __func__);
-
-	ret = par->fbtftops.write(par, par->buf, len);
-	if (ret < 0) {
-		dev_err(par->info->device,
-			"write() failed and returned %d\n", ret);
-		return;
-	}
-}
-
-static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
-{
-	unsigned int start_line, end_line;
-	u16 *vmem16 = (u16 *)(par->info->screen_buffer + offset);
-	__be16 *pos = par->txbuf.buf + 1;
-	__be16 *buf16 = par->txbuf.buf + 10;
-	int i, j;
-	int ret = 0;
-
-	start_line = offset / par->info->fix.line_length;
-	end_line = start_line + (len / par->info->fix.line_length) - 1;
-
-	/* Set command header. pos: x, y, w, h */
-	((u8 *)par->txbuf.buf)[0] = CMD_LCD_DRAWIMAGE;
-	pos[0] = 0;
-	pos[2] = cpu_to_be16(par->info->var.xres);
-	pos[3] = cpu_to_be16(1);
-	((u8 *)par->txbuf.buf)[9] = COLOR_RGB565;
-
-	for (i = start_line; i <= end_line; i++) {
-		pos[1] = cpu_to_be16(i);
-		for (j = 0; j < par->info->var.xres; j++)
-			buf16[j] = cpu_to_be16(*vmem16++);
-		ret = par->fbtftops.write(par,
-			par->txbuf.buf, 10 + par->info->fix.line_length);
-		if (ret < 0)
-			return ret;
-		udelay(300);
-	}
-
-	return 0;
-}
-
-static inline int rgb565_to_rgb332(u16 c)
-{
-	return ((c & 0xE000) >> 8) | ((c & 000700) >> 6) | ((c & 0x0018) >> 3);
-}
-
-static int write_vmem_8bit(struct fbtft_par *par, size_t offset, size_t len)
-{
-	unsigned int start_line, end_line;
-	u16 *vmem16 = (u16 *)(par->info->screen_buffer + offset);
-	__be16 *pos = par->txbuf.buf + 1;
-	u8 *buf8 = par->txbuf.buf + 10;
-	int i, j;
-	int ret = 0;
-
-	start_line = offset / par->info->fix.line_length;
-	end_line = start_line + (len / par->info->fix.line_length) - 1;
-
-	/* Set command header. pos: x, y, w, h */
-	((u8 *)par->txbuf.buf)[0] = CMD_LCD_DRAWIMAGE;
-	pos[0] = 0;
-	pos[2] = cpu_to_be16(par->info->var.xres);
-	pos[3] = cpu_to_be16(1);
-	((u8 *)par->txbuf.buf)[9] = COLOR_RGB332;
-
-	for (i = start_line; i <= end_line; i++) {
-		pos[1] = cpu_to_be16(i);
-		for (j = 0; j < par->info->var.xres; j++) {
-			buf8[j] = rgb565_to_rgb332(*vmem16);
-			vmem16++;
-		}
-		ret = par->fbtftops.write(par,
-			par->txbuf.buf, 10 + par->info->var.xres);
-		if (ret < 0)
-			return ret;
-		udelay(700);
-	}
-
-	return 0;
-}
-
-static unsigned int firmware_version(struct fbtft_par *par)
-{
-	u8 rxbuf[4] = {0, };
-
-	write_reg(par, CMD_VERSION);
-	par->fbtftops.read(par, rxbuf, 4);
-	if (rxbuf[1] != '.')
-		return 0;
-
-	return (rxbuf[0] - '0') << 8 | (rxbuf[2] - '0') << 4 | (rxbuf[3] - '0');
-}
-
-static int init_display(struct fbtft_par *par)
-{
-	int ret;
-	unsigned int version;
-	u8 save_mode;
-
-	/* enable SPI interface by having CS and MOSI low during reset */
-	save_mode = par->spi->mode;
-	/*
-	 * Set CS active inverse polarity: just setting SPI_CS_HIGH does not
-	 * work with GPIO based chip selects that are logically active high
-	 * but inverted inside the GPIO library, so enforce inverted
-	 * semantics.
-	 */
-	par->spi->mode ^= SPI_CS_HIGH;
-	ret = spi_setup(par->spi);
-	if (ret) {
-		dev_err(par->info->device,
-			"Could not set inverse CS polarity\n");
-		return ret;
-	}
-	write_reg(par, 0x00); /* make sure mode is set */
-
-	mdelay(50);
-	par->fbtftops.reset(par);
-	mdelay(1000);
-	par->spi->mode = save_mode;
-	ret = spi_setup(par->spi);
-	if (ret) {
-		dev_err(par->info->device, "Could not restore SPI mode\n");
-		return ret;
-	}
-	write_reg(par, 0x00);
-
-	version = firmware_version(par);
-	fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "Firmware version: %x.%02x\n",
-		      version >> 8, version & 0xFF);
-
-	if (mode == 332)
-		par->fbtftops.write_vmem = write_vmem_8bit;
-	return 0;
-}
-
-static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
-{
-	/* not used on this controller */
-}
-
-static int set_var(struct fbtft_par *par)
-{
-	u8 rotate;
-
-	/* this controller rotates clock wise */
-	switch (par->info->var.rotate) {
-	case 90:
-		rotate = 27;
-		break;
-	case 180:
-		rotate = 18;
-		break;
-	case 270:
-		rotate = 9;
-		break;
-	default:
-		rotate = 0;
-	}
-	write_reg(par, CMD_LCD_ORIENTATION, rotate);
-
-	return 0;
-}
-
-static int verify_gpios(struct fbtft_par *par)
-{
-	if (!par->gpio.reset) {
-		dev_err(par->info->device, "Missing 'reset' gpio. Aborting.\n");
-		return -EINVAL;
-	}
-	return 0;
-}
-
-#ifdef CONFIG_FB_BACKLIGHT
-static int backlight_chip_update_status(struct backlight_device *bd)
-{
-	struct fbtft_par *par = bl_get_data(bd);
-	int brightness = bd->props.brightness;
-
-	fbtft_par_dbg(DEBUG_BACKLIGHT, par,
-		      "%s: brightness=%d, power=%d, fb_blank=%d\n", __func__,
-		      bd->props.brightness, bd->props.power,
-		      bd->props.fb_blank);
-
-	if (bd->props.power != FB_BLANK_UNBLANK)
-		brightness = 0;
-
-	if (bd->props.fb_blank != FB_BLANK_UNBLANK)
-		brightness = 0;
-
-	write_reg(par, CMD_LCD_LED, brightness);
-
-	return 0;
-}
-
-static const struct backlight_ops bl_ops = {
-	.update_status = backlight_chip_update_status,
-};
-
-static void register_chip_backlight(struct fbtft_par *par)
-{
-	struct backlight_device *bd;
-	struct backlight_properties bl_props = { 0, };
-
-	bl_props.type = BACKLIGHT_RAW;
-	bl_props.power = FB_BLANK_POWERDOWN;
-	bl_props.max_brightness = 100;
-	bl_props.brightness = DEFAULT_BRIGHTNESS;
-
-	bd = backlight_device_register(dev_driver_string(par->info->device),
-				       par->info->device, par, &bl_ops,
-				       &bl_props);
-	if (IS_ERR(bd)) {
-		dev_err(par->info->device,
-			"cannot register backlight device (%ld)\n",
-			PTR_ERR(bd));
-		return;
-	}
-	par->info->bl_dev = bd;
-
-	if (!par->fbtftops.unregister_backlight)
-		par->fbtftops.unregister_backlight = fbtft_unregister_backlight;
-}
-#else
-#define register_chip_backlight NULL
-#endif
-
-static struct fbtft_display display = {
-	.regwidth = 8,
-	.buswidth = 8,
-	.width = WIDTH,
-	.height = HEIGHT,
-	.fps = FPS,
-	.txbuflen = TXBUFLEN,
-	.fbtftops = {
-		.write_register = write_reg8_bus8,
-		.write_vmem = write_vmem,
-		.init_display = init_display,
-		.set_addr_win = set_addr_win,
-		.set_var = set_var,
-		.verify_gpios = verify_gpios,
-		.register_backlight = register_chip_backlight,
-	},
-};
-
-FBTFT_REGISTER_DRIVER(DRVNAME, "watterott,openlcd", &display);
-
-MODULE_ALIAS("spi:" DRVNAME);
-
-MODULE_DESCRIPTION("FB driver for the Watterott LCD Controller");
-MODULE_AUTHOR("Noralf Tronnes");
-MODULE_LICENSE("GPL");