1 files changed, 121 insertions, 123 deletions

diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c
index b5625f5d5e0e..d626125d7af9 100644
--- a/drivers/staging/iio/accel/sca3000_core.c
+++ b/drivers/staging/iio/accel/sca3000_core.c
@@ -402,6 +402,7 @@ static const struct iio_event_spec sca3000_event = {
 		.channel2 = mod,				\
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
 		.address = index,				\
 		.scan_index = index,				\
 		.scan_type = {					\
@@ -412,7 +413,7 @@ static const struct iio_event_spec sca3000_event = {
 		},						\
 		.event_spec = &sca3000_event,			\
 		.num_event_specs = 1,				\
-	 }
+	}
 
 static const struct iio_chan_spec sca3000_channels[] = {
 	SCA3000_CHAN(0, IIO_MOD_X),
@@ -443,6 +444,97 @@ static u8 sca3000_addresses[3][3] = {
 	       SCA3000_MD_CTRL_OR_Z},
 };
 
+/**
+ * __sca3000_get_base_freq() obtain mode specific base frequency
+ *
+ * lock must be held
+ **/
+static inline int __sca3000_get_base_freq(struct sca3000_state *st,
+					  const struct sca3000_chip_info *info,
+					  int *base_freq)
+{
+	int ret;
+
+	ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1);
+	if (ret)
+		goto error_ret;
+	switch (0x03 & st->rx[0]) {
+	case SCA3000_MEAS_MODE_NORMAL:
+		*base_freq = info->measurement_mode_freq;
+		break;
+	case SCA3000_MEAS_MODE_OP_1:
+		*base_freq = info->option_mode_1_freq;
+		break;
+	case SCA3000_MEAS_MODE_OP_2:
+		*base_freq = info->option_mode_2_freq;
+		break;
+	}
+error_ret:
+	return ret;
+}
+
+/**
+ * read_raw handler for IIO_CHAN_INFO_SAMP_FREQ
+ *
+ * lock must be held
+ **/
+static int read_raw_samp_freq(struct sca3000_state *st, int *val)
+{
+	int ret;
+
+	ret = __sca3000_get_base_freq(st, st->info, val);
+	if (ret)
+		return ret;
+
+	ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL);
+	if (ret < 0)
+		return ret;
+
+	if (*val > 0) {
+		ret &= SCA3000_OUT_CTRL_BUF_DIV_MASK;
+		switch (ret) {
+		case SCA3000_OUT_CTRL_BUF_DIV_2:
+			*val /= 2;
+			break;
+		case SCA3000_OUT_CTRL_BUF_DIV_4:
+			*val /= 4;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * write_raw handler for IIO_CHAN_INFO_SAMP_FREQ
+ *
+ * lock must be held
+ **/
+static int write_raw_samp_freq(struct sca3000_state *st, int val)
+{
+	int ret, base_freq, ctrlval;
+
+	ret = __sca3000_get_base_freq(st, st->info, &base_freq);
+	if (ret)
+		return ret;
+
+	ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL);
+	if (ret < 0)
+		return ret;
+
+	ctrlval = ret & ~SCA3000_OUT_CTRL_BUF_DIV_MASK;
+
+	if (val == base_freq / 2)
+		ctrlval |= SCA3000_OUT_CTRL_BUF_DIV_2;
+	if (val == base_freq / 4)
+		ctrlval |= SCA3000_OUT_CTRL_BUF_DIV_4;
+	else if (val != base_freq)
+		return -EINVAL;
+
+	return sca3000_write_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL,
+				     ctrlval);
+}
+
 static int sca3000_read_raw(struct iio_dev *indio_dev,
 			    struct iio_chan_spec const *chan,
 			    int *val,
@@ -495,9 +587,36 @@ static int sca3000_read_raw(struct iio_dev *indio_dev,
 		*val = -214;
 		*val2 = 600000;
 		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		mutex_lock(&st->lock);
+		ret = read_raw_samp_freq(st, val);
+		mutex_unlock(&st->lock);
+		return ret ? ret : IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sca3000_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct sca3000_state *st = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val2)
+			return -EINVAL;
+		mutex_lock(&st->lock);
+		ret = write_raw_samp_freq(st, val);
+		mutex_unlock(&st->lock);
+		return ret;
 	default:
 		return -EINVAL;
 	}
+
+	return ret;
 }
 
 /**
@@ -548,133 +667,12 @@ error_ret:
 	return ret;
 }
 
-/**
- * __sca3000_get_base_freq() obtain mode specific base frequency
- *
- * lock must be held
- **/
-static inline int __sca3000_get_base_freq(struct sca3000_state *st,
-					  const struct sca3000_chip_info *info,
-					  int *base_freq)
-{
-	int ret;
-
-	ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1);
-	if (ret)
-		goto error_ret;
-	switch (0x03 & st->rx[0]) {
-	case SCA3000_MEAS_MODE_NORMAL:
-		*base_freq = info->measurement_mode_freq;
-		break;
-	case SCA3000_MEAS_MODE_OP_1:
-		*base_freq = info->option_mode_1_freq;
-		break;
-	case SCA3000_MEAS_MODE_OP_2:
-		*base_freq = info->option_mode_2_freq;
-		break;
-	}
-error_ret:
-	return ret;
-}
-
-/**
- * sca3000_read_frequency() sysfs interface to get the current frequency
- **/
-static ssize_t sca3000_read_frequency(struct device *dev,
-				      struct device_attribute *attr,
-				      char *buf)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct sca3000_state *st = iio_priv(indio_dev);
-	int ret, len = 0, base_freq = 0, val;
-
-	mutex_lock(&st->lock);
-	ret = __sca3000_get_base_freq(st, st->info, &base_freq);
-	if (ret)
-		goto error_ret_mut;
-	ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL);
-	mutex_unlock(&st->lock);
-	if (ret < 0)
-		goto error_ret;
-	val = ret;
-	if (base_freq > 0)
-		switch (val & 0x03) {
-		case 0x00:
-		case 0x03:
-			len = sprintf(buf, "%d\n", base_freq);
-			break;
-		case 0x01:
-			len = sprintf(buf, "%d\n", base_freq / 2);
-			break;
-		case 0x02:
-			len = sprintf(buf, "%d\n", base_freq / 4);
-			break;
-	}
-
-	return len;
-error_ret_mut:
-	mutex_unlock(&st->lock);
-error_ret:
-	return ret;
-}
-
-/**
- * sca3000_set_frequency() sysfs interface to set the current frequency
- **/
-static ssize_t sca3000_set_frequency(struct device *dev,
-				     struct device_attribute *attr,
-				     const char *buf,
-				     size_t len)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct sca3000_state *st = iio_priv(indio_dev);
-	int ret, base_freq = 0;
-	int ctrlval;
-	int val;
-
-	ret = kstrtoint(buf, 10, &val);
-	if (ret)
-		return ret;
-
-	mutex_lock(&st->lock);
-	/* What mode are we in? */
-	ret = __sca3000_get_base_freq(st, st->info, &base_freq);
-	if (ret)
-		goto error_free_lock;
-
-	ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL);
-	if (ret < 0)
-		goto error_free_lock;
-	ctrlval = ret;
-	/* clear the bits */
-	ctrlval &= ~0x03;
-
-	if (val == base_freq / 2) {
-		ctrlval |= SCA3000_OUT_CTRL_BUF_DIV_2;
-	} else if (val == base_freq / 4) {
-		ctrlval |= SCA3000_OUT_CTRL_BUF_DIV_4;
-	} else if (val != base_freq) {
-		ret = -EINVAL;
-		goto error_free_lock;
-	}
-	ret = sca3000_write_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL,
-				     ctrlval);
-error_free_lock:
-	mutex_unlock(&st->lock);
-
-	return ret ? ret : len;
-}
-
 /*
  * Should only really be registered if ring buffer support is compiled in.
  * Does no harm however and doing it right would add a fair bit of complexity
  */
 static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(sca3000_read_av_freq);
 
-static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
-			      sca3000_read_frequency,
-			      sca3000_set_frequency);
-
 /**
  * sca3000_read_thresh() - query of a threshold
  **/
@@ -751,7 +749,6 @@ static struct attribute *sca3000_attributes[] = {
 	&iio_dev_attr_measurement_mode_available.dev_attr.attr,
 	&iio_dev_attr_measurement_mode.dev_attr.attr,
 	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
-	&iio_dev_attr_sampling_frequency.dev_attr.attr,
 	NULL,
 };
 
@@ -1086,6 +1083,7 @@ error_ret:
 static const struct iio_info sca3000_info = {
 	.attrs = &sca3000_attribute_group,
 	.read_raw = &sca3000_read_raw,
+	.write_raw = &sca3000_write_raw,
 	.event_attrs = &sca3000_event_attribute_group,
 	.read_event_value = &sca3000_read_thresh,
 	.write_event_value = &sca3000_write_thresh,