diff options
Diffstat (limited to 'drivers/staging/irda/drivers/tekram-sir.c')
| -rw-r--r-- | drivers/staging/irda/drivers/tekram-sir.c | 225 |
1 files changed, 225 insertions, 0 deletions
diff --git a/drivers/staging/irda/drivers/tekram-sir.c b/drivers/staging/irda/drivers/tekram-sir.c new file mode 100644 index 000000000000..9dcf0c103b9d --- /dev/null +++ b/drivers/staging/irda/drivers/tekram-sir.c @@ -0,0 +1,225 @@ +/********************************************************************* + * + * Filename: tekram.c + * Version: 1.3 + * Description: Implementation of the Tekram IrMate IR-210B dongle + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Wed Oct 21 20:02:35 1998 + * Modified at: Sun Oct 27 22:02:38 2002 + * Modified by: Martin Diehl <mad@mdiehl.de> + * + * Copyright (c) 1998-1999 Dag Brattli, + * Copyright (c) 2002 Martin Diehl, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/init.h> + +#include <net/irda/irda.h> + +#include "sir-dev.h" + +static int tekram_delay = 150; /* default is 150 ms */ +module_param(tekram_delay, int, 0); +MODULE_PARM_DESC(tekram_delay, "tekram dongle write complete delay"); + +static int tekram_open(struct sir_dev *); +static int tekram_close(struct sir_dev *); +static int tekram_change_speed(struct sir_dev *, unsigned); +static int tekram_reset(struct sir_dev *); + +#define TEKRAM_115200 0x00 +#define TEKRAM_57600 0x01 +#define TEKRAM_38400 0x02 +#define TEKRAM_19200 0x03 +#define TEKRAM_9600 0x04 + +#define TEKRAM_PW 0x10 /* Pulse select bit */ + +static struct dongle_driver tekram = { + .owner = THIS_MODULE, + .driver_name = "Tekram IR-210B", + .type = IRDA_TEKRAM_DONGLE, + .open = tekram_open, + .close = tekram_close, + .reset = tekram_reset, + .set_speed = tekram_change_speed, +}; + +static int __init tekram_sir_init(void) +{ + if (tekram_delay < 1 || tekram_delay > 500) + tekram_delay = 200; + pr_debug("%s - using %d ms delay\n", + tekram.driver_name, tekram_delay); + return irda_register_dongle(&tekram); +} + +static void __exit tekram_sir_cleanup(void) +{ + irda_unregister_dongle(&tekram); +} + +static int tekram_open(struct sir_dev *dev) +{ + struct qos_info *qos = &dev->qos; + + sirdev_set_dtr_rts(dev, TRUE, TRUE); + + qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200; + qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */ + irda_qos_bits_to_value(qos); + + /* irda thread waits 50 msec for power settling */ + + return 0; +} + +static int tekram_close(struct sir_dev *dev) +{ + /* Power off dongle */ + sirdev_set_dtr_rts(dev, FALSE, FALSE); + + return 0; +} + +/* + * Function tekram_change_speed (dev, state, speed) + * + * Set the speed for the Tekram IRMate 210 type dongle. Warning, this + * function must be called with a process context! + * + * Algorithm + * 1. clear DTR + * 2. set RTS, and wait at least 7 us + * 3. send Control Byte to the IR-210 through TXD to set new baud rate + * wait until the stop bit of Control Byte is sent (for 9600 baud rate, + * it takes about 100 msec) + * + * [oops, why 100 msec? sending 1 byte (10 bits) takes 1.05 msec + * - is this probably to compensate for delays in tty layer?] + * + * 5. clear RTS (return to NORMAL Operation) + * 6. wait at least 50 us, new setting (baud rate, etc) takes effect here + * after + */ + +#define TEKRAM_STATE_WAIT_SPEED (SIRDEV_STATE_DONGLE_SPEED + 1) + +static int tekram_change_speed(struct sir_dev *dev, unsigned speed) +{ + unsigned state = dev->fsm.substate; + unsigned delay = 0; + u8 byte; + static int ret = 0; + + switch(state) { + case SIRDEV_STATE_DONGLE_SPEED: + + switch (speed) { + default: + speed = 9600; + ret = -EINVAL; + /* fall thru */ + case 9600: + byte = TEKRAM_PW|TEKRAM_9600; + break; + case 19200: + byte = TEKRAM_PW|TEKRAM_19200; + break; + case 38400: + byte = TEKRAM_PW|TEKRAM_38400; + break; + case 57600: + byte = TEKRAM_PW|TEKRAM_57600; + break; + case 115200: + byte = TEKRAM_115200; + break; + } + + /* Set DTR, Clear RTS */ + sirdev_set_dtr_rts(dev, TRUE, FALSE); + + /* Wait at least 7us */ + udelay(14); + + /* Write control byte */ + sirdev_raw_write(dev, &byte, 1); + + dev->speed = speed; + + state = TEKRAM_STATE_WAIT_SPEED; + delay = tekram_delay; + break; + + case TEKRAM_STATE_WAIT_SPEED: + /* Set DTR, Set RTS */ + sirdev_set_dtr_rts(dev, TRUE, TRUE); + udelay(50); + break; + + default: + net_err_ratelimited("%s - undefined state %d\n", + __func__, state); + ret = -EINVAL; + break; + } + + dev->fsm.substate = state; + return (delay > 0) ? delay : ret; +} + +/* + * Function tekram_reset (driver) + * + * This function resets the tekram dongle. Warning, this function + * must be called with a process context!! + * + * Algorithm: + * 0. Clear RTS and DTR, and wait 50 ms (power off the IR-210 ) + * 1. clear RTS + * 2. set DTR, and wait at least 1 ms + * 3. clear DTR to SPACE state, wait at least 50 us for further + * operation + */ + +static int tekram_reset(struct sir_dev *dev) +{ + /* Clear DTR, Set RTS */ + sirdev_set_dtr_rts(dev, FALSE, TRUE); + + /* Should sleep 1 ms */ + msleep(1); + + /* Set DTR, Set RTS */ + sirdev_set_dtr_rts(dev, TRUE, TRUE); + + /* Wait at least 50 us */ + udelay(75); + + dev->speed = 9600; + + return 0; +} + +MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>"); +MODULE_DESCRIPTION("Tekram IrMate IR-210B dongle driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("irda-dongle-0"); /* IRDA_TEKRAM_DONGLE */ + +module_init(tekram_sir_init); +module_exit(tekram_sir_cleanup); |