diff options
Diffstat (limited to 'drivers/staging/isdn/hysdn/boardergo.h')
| -rw-r--r-- | drivers/staging/isdn/hysdn/boardergo.h | 100 |
1 files changed, 0 insertions, 100 deletions
diff --git a/drivers/staging/isdn/hysdn/boardergo.h b/drivers/staging/isdn/hysdn/boardergo.h deleted file mode 100644 index e99bd81c4034..000000000000 --- a/drivers/staging/isdn/hysdn/boardergo.h +++ /dev/null @@ -1,100 +0,0 @@ -/* $Id: boardergo.h,v 1.2.6.1 2001/09/23 22:24:54 kai Exp $ - * - * Linux driver for HYSDN cards, definitions for ergo type boards (buffers..). - * - * Author Werner Cornelius (werner@titro.de) for Hypercope GmbH - * Copyright 1999 by Werner Cornelius (werner@titro.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - - -/************************************************/ -/* defines for the dual port memory of the card */ -/************************************************/ -#define ERG_DPRAM_PAGE_SIZE 0x2000 /* DPRAM occupies a 8K page */ -#define BOOT_IMG_SIZE 4096 -#define ERG_DPRAM_FILL_SIZE (ERG_DPRAM_PAGE_SIZE - BOOT_IMG_SIZE) - -#define ERG_TO_HY_BUF_SIZE 0x0E00 /* 3072 bytes buffer size to card */ -#define ERG_TO_PC_BUF_SIZE 0x0E00 /* 3072 bytes to PC, too */ - -/* following DPRAM layout copied from OS2-driver boarderg.h */ -typedef struct ErgDpram_tag { - /*0000 */ unsigned char ToHyBuf[ERG_TO_HY_BUF_SIZE]; - /*0E00 */ unsigned char ToPcBuf[ERG_TO_PC_BUF_SIZE]; - - /*1C00 */ unsigned char bSoftUart[SIZE_RSV_SOFT_UART]; - /* size 0x1B0 */ - - /*1DB0 *//* tErrLogEntry */ unsigned char volatile ErrLogMsg[64]; - /* size 64 bytes */ - /*1DB0 unsigned long ulErrType; */ - /*1DB4 unsigned long ulErrSubtype; */ - /*1DB8 unsigned long ucTextSize; */ - /*1DB9 unsigned long ucText[ERRLOG_TEXT_SIZE]; *//* ASCIIZ of len ucTextSize-1 */ - /*1DF0 */ - - /*1DF0 */ unsigned short volatile ToHyChannel; - /*1DF2 */ unsigned short volatile ToHySize; - /*1DF4 */ unsigned char volatile ToHyFlag; - /* !=0: msg for Hy waiting */ - /*1DF5 */ unsigned char volatile ToPcFlag; - /* !=0: msg for PC waiting */ - /*1DF6 */ unsigned short volatile ToPcChannel; - /*1DF8 */ unsigned short volatile ToPcSize; - /*1DFA */ unsigned char bRes1DBA[0x1E00 - 0x1DFA]; - /* 6 bytes */ - - /*1E00 */ unsigned char bRestOfEntryTbl[0x1F00 - 0x1E00]; - /*1F00 */ unsigned long TrapTable[62]; - /*1FF8 */ unsigned char bRes1FF8[0x1FFB - 0x1FF8]; - /* low part of reset vetor */ - /*1FFB */ unsigned char ToPcIntMetro; - /* notes: - * - metro has 32-bit boot ram - accessing - * ToPcInt and ToHyInt would be the same; - * so we moved ToPcInt to 1FFB. - * Because on the PC side both vars are - * readonly (reseting on int from E1 to PC), - * we can read both vars on both cards - * without destroying anything. - * - 1FFB is the high byte of the reset vector, - * so E1 side should NOT change this byte - * when writing! - */ - /*1FFC */ unsigned char volatile ToHyNoDpramErrLog; - /* note: ToHyNoDpramErrLog is used to inform - * boot loader, not to use DPRAM based - * ErrLog; when DOS driver is rewritten - * this becomes obsolete - */ - /*1FFD */ unsigned char bRes1FFD; - /*1FFE */ unsigned char ToPcInt; - /* E1_intclear; on CHAMP2: E1_intset */ - /*1FFF */ unsigned char ToHyInt; - /* E1_intset; on CHAMP2: E1_intclear */ -} tErgDpram; - -/**********************************************/ -/* PCI9050 controller local register offsets: */ -/* copied from boarderg.c */ -/**********************************************/ -#define PCI9050_INTR_REG 0x4C /* Interrupt register */ -#define PCI9050_USER_IO 0x51 /* User I/O register */ - -/* bitmask for PCI9050_INTR_REG: */ -#define PCI9050_INTR_REG_EN1 0x01 /* 1= enable (def.), 0= disable */ -#define PCI9050_INTR_REG_POL1 0x02 /* 1= active high (def.), 0= active low */ -#define PCI9050_INTR_REG_STAT1 0x04 /* 1= intr. active, 0= intr. not active (def.) */ -#define PCI9050_INTR_REG_ENPCI 0x40 /* 1= PCI interrupts enable (def.) */ - -/* bitmask for PCI9050_USER_IO: */ -#define PCI9050_USER_IO_EN3 0x02 /* 1= disable , 0= enable (def.) */ -#define PCI9050_USER_IO_DIR3 0x04 /* 1= output (def.), 0= input */ -#define PCI9050_USER_IO_DAT3 0x08 /* 1= high (def.) , 0= low */ - -#define PCI9050_E1_RESET (PCI9050_USER_IO_DIR3) /* 0x04 */ -#define PCI9050_E1_RUN (PCI9050_USER_IO_DAT3 | PCI9050_USER_IO_DIR3) /* 0x0C */ |