aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/staging/isdn/hysdn/hysdn_sched.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/staging/isdn/hysdn/hysdn_sched.c')
-rw-r--r--drivers/staging/isdn/hysdn/hysdn_sched.c197
1 files changed, 0 insertions, 197 deletions
diff --git a/drivers/staging/isdn/hysdn/hysdn_sched.c b/drivers/staging/isdn/hysdn/hysdn_sched.c
deleted file mode 100644
index 31d7c1415543..000000000000
--- a/drivers/staging/isdn/hysdn/hysdn_sched.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/* $Id: hysdn_sched.c,v 1.5.6.4 2001/11/06 21:58:19 kai Exp $
- *
- * Linux driver for HYSDN cards
- * scheduler routines for handling exchange card <-> pc.
- *
- * Author Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/signal.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-
-#include "hysdn_defs.h"
-
-/*****************************************************************************/
-/* hysdn_sched_rx is called from the cards handler to announce new data is */
-/* available from the card. The routine has to handle the data and return */
-/* with a nonzero code if the data could be worked (or even thrown away), if */
-/* no room to buffer the data is available a zero return tells the card */
-/* to keep the data until later. */
-/*****************************************************************************/
-int
-hysdn_sched_rx(hysdn_card *card, unsigned char *buf, unsigned short len,
- unsigned short chan)
-{
-
- switch (chan) {
- case CHAN_NDIS_DATA:
- if (hynet_enable & (1 << card->myid)) {
- /* give packet to network handler */
- hysdn_rx_netpkt(card, buf, len);
- }
- break;
-
- case CHAN_ERRLOG:
- hysdn_card_errlog(card, (tErrLogEntry *) buf, len);
- if (card->err_log_state == ERRLOG_STATE_ON)
- card->err_log_state = ERRLOG_STATE_START; /* start new fetch */
- break;
-#ifdef CONFIG_HYSDN_CAPI
- case CHAN_CAPI:
-/* give packet to CAPI handler */
- if (hycapi_enable & (1 << card->myid)) {
- hycapi_rx_capipkt(card, buf, len);
- }
- break;
-#endif /* CONFIG_HYSDN_CAPI */
- default:
- printk(KERN_INFO "irq message channel %d len %d unhandled \n", chan, len);
- break;
-
- } /* switch rx channel */
-
- return (1); /* always handled */
-} /* hysdn_sched_rx */
-
-/*****************************************************************************/
-/* hysdn_sched_tx is called from the cards handler to announce that there is */
-/* room in the tx-buffer to the card and data may be sent if needed. */
-/* If the routine wants to send data it must fill buf, len and chan with the */
-/* appropriate data and return a nonzero value. With a zero return no new */
-/* data to send is assumed. maxlen specifies the buffer size available for */
-/* sending. */
-/*****************************************************************************/
-int
-hysdn_sched_tx(hysdn_card *card, unsigned char *buf,
- unsigned short volatile *len, unsigned short volatile *chan,
- unsigned short maxlen)
-{
- struct sk_buff *skb;
-
- if (card->net_tx_busy) {
- card->net_tx_busy = 0; /* reset flag */
- hysdn_tx_netack(card); /* acknowledge packet send */
- } /* a network packet has completely been transferred */
- /* first of all async requests are handled */
- if (card->async_busy) {
- if (card->async_len <= maxlen) {
- memcpy(buf, card->async_data, card->async_len);
- *len = card->async_len;
- *chan = card->async_channel;
- card->async_busy = 0; /* reset request */
- return (1);
- }
- card->async_busy = 0; /* in case of length error */
- } /* async request */
- if ((card->err_log_state == ERRLOG_STATE_START) &&
- (maxlen >= ERRLOG_CMD_REQ_SIZE)) {
- strcpy(buf, ERRLOG_CMD_REQ); /* copy the command */
- *len = ERRLOG_CMD_REQ_SIZE; /* buffer length */
- *chan = CHAN_ERRLOG; /* and channel */
- card->err_log_state = ERRLOG_STATE_ON; /* new state is on */
- return (1); /* tell that data should be send */
- } /* error log start and able to send */
- if ((card->err_log_state == ERRLOG_STATE_STOP) &&
- (maxlen >= ERRLOG_CMD_STOP_SIZE)) {
- strcpy(buf, ERRLOG_CMD_STOP); /* copy the command */
- *len = ERRLOG_CMD_STOP_SIZE; /* buffer length */
- *chan = CHAN_ERRLOG; /* and channel */
- card->err_log_state = ERRLOG_STATE_OFF; /* new state is off */
- return (1); /* tell that data should be send */
- } /* error log start and able to send */
- /* now handle network interface packets */
- if ((hynet_enable & (1 << card->myid)) &&
- (skb = hysdn_tx_netget(card)) != NULL)
- {
- if (skb->len <= maxlen) {
- /* copy the packet to the buffer */
- skb_copy_from_linear_data(skb, buf, skb->len);
- *len = skb->len;
- *chan = CHAN_NDIS_DATA;
- card->net_tx_busy = 1; /* we are busy sending network data */
- return (1); /* go and send the data */
- } else
- hysdn_tx_netack(card); /* aknowledge packet -> throw away */
- } /* send a network packet if available */
-#ifdef CONFIG_HYSDN_CAPI
- if (((hycapi_enable & (1 << card->myid))) &&
- ((skb = hycapi_tx_capiget(card)) != NULL))
- {
- if (skb->len <= maxlen) {
- skb_copy_from_linear_data(skb, buf, skb->len);
- *len = skb->len;
- *chan = CHAN_CAPI;
- hycapi_tx_capiack(card);
- return (1); /* go and send the data */
- }
- }
-#endif /* CONFIG_HYSDN_CAPI */
- return (0); /* nothing to send */
-} /* hysdn_sched_tx */
-
-
-/*****************************************************************************/
-/* send one config line to the card and return 0 if successful, otherwise a */
-/* negative error code. */
-/* The function works with timeouts perhaps not giving the greatest speed */
-/* sending the line, but this should be meaningless because only some lines */
-/* are to be sent and this happens very seldom. */
-/*****************************************************************************/
-int
-hysdn_tx_cfgline(hysdn_card *card, unsigned char *line, unsigned short chan)
-{
- int cnt = 50; /* timeout intervalls */
- unsigned long flags;
-
- if (card->debug_flags & LOG_SCHED_ASYN)
- hysdn_addlog(card, "async tx-cfg chan=%d len=%d", chan, strlen(line) + 1);
-
- while (card->async_busy) {
-
- if (card->debug_flags & LOG_SCHED_ASYN)
- hysdn_addlog(card, "async tx-cfg delayed");
-
- msleep_interruptible(20); /* Timeout 20ms */
- if (!--cnt)
- return (-ERR_ASYNC_TIME); /* timed out */
- } /* wait for buffer to become free */
-
- spin_lock_irqsave(&card->hysdn_lock, flags);
- strcpy(card->async_data, line);
- card->async_len = strlen(line) + 1;
- card->async_channel = chan;
- card->async_busy = 1; /* request transfer */
-
- /* now queue the task */
- schedule_work(&card->irq_queue);
- spin_unlock_irqrestore(&card->hysdn_lock, flags);
-
- if (card->debug_flags & LOG_SCHED_ASYN)
- hysdn_addlog(card, "async tx-cfg data queued");
-
- cnt++; /* short delay */
-
- while (card->async_busy) {
-
- if (card->debug_flags & LOG_SCHED_ASYN)
- hysdn_addlog(card, "async tx-cfg waiting for tx-ready");
-
- msleep_interruptible(20); /* Timeout 20ms */
- if (!--cnt)
- return (-ERR_ASYNC_TIME); /* timed out */
- } /* wait for buffer to become free again */
-
- if (card->debug_flags & LOG_SCHED_ASYN)
- hysdn_addlog(card, "async tx-cfg data send");
-
- return (0); /* line send correctly */
-} /* hysdn_tx_cfgline */
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.