diff options
Diffstat (limited to 'drivers/staging/media/deprecated/tm6000/tm6000-cards.c')
| -rw-r--r-- | drivers/staging/media/deprecated/tm6000/tm6000-cards.c | 1397 |
1 files changed, 1397 insertions, 0 deletions
diff --git a/drivers/staging/media/deprecated/tm6000/tm6000-cards.c b/drivers/staging/media/deprecated/tm6000/tm6000-cards.c new file mode 100644 index 000000000000..98f4a63adc2a --- /dev/null +++ b/drivers/staging/media/deprecated/tm6000/tm6000-cards.c @@ -0,0 +1,1397 @@ +// SPDX-License-Identifier: GPL-2.0 +// tm6000-cards.c - driver for TM5600/TM6000/TM6010 USB video capture devices +// +// Copyright (c) 2006-2007 Mauro Carvalho Chehab <mchehab@kernel.org> + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/usb.h> +#include <linux/slab.h> +#include <media/v4l2-common.h> +#include <media/tuner.h> +#include <media/i2c/tvaudio.h> +#include <media/rc-map.h> + +#include "tm6000.h" +#include "tm6000-regs.h" +#include "xc2028.h" +#include "xc5000.h" + +#define TM6000_BOARD_UNKNOWN 0 +#define TM5600_BOARD_GENERIC 1 +#define TM6000_BOARD_GENERIC 2 +#define TM6010_BOARD_GENERIC 3 +#define TM5600_BOARD_10MOONS_UT821 4 +#define TM5600_BOARD_10MOONS_UT330 5 +#define TM6000_BOARD_ADSTECH_DUAL_TV 6 +#define TM6000_BOARD_FREECOM_AND_SIMILAR 7 +#define TM6000_BOARD_ADSTECH_MINI_DUAL_TV 8 +#define TM6010_BOARD_HAUPPAUGE_900H 9 +#define TM6010_BOARD_BEHOLD_WANDER 10 +#define TM6010_BOARD_BEHOLD_VOYAGER 11 +#define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE 12 +#define TM6010_BOARD_TWINHAN_TU501 13 +#define TM6010_BOARD_BEHOLD_WANDER_LITE 14 +#define TM6010_BOARD_BEHOLD_VOYAGER_LITE 15 +#define TM5600_BOARD_TERRATEC_GRABSTER 16 + +#define is_generic(model) ((model == TM6000_BOARD_UNKNOWN) || \ + (model == TM5600_BOARD_GENERIC) || \ + (model == TM6000_BOARD_GENERIC) || \ + (model == TM6010_BOARD_GENERIC)) + +#define TM6000_MAXBOARDS 16 +static unsigned int card[] = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET }; + +module_param_array(card, int, NULL, 0444); + +static unsigned long tm6000_devused; + + +struct tm6000_board { + char *name; + char eename[16]; /* EEPROM name */ + unsigned eename_size; /* size of EEPROM name */ + unsigned eename_pos; /* Position where it appears at ROM */ + + struct tm6000_capabilities caps; + + enum tm6000_devtype type; /* variant of the chipset */ + int tuner_type; /* type of the tuner */ + int tuner_addr; /* tuner address */ + int demod_addr; /* demodulator address */ + + struct tm6000_gpio gpio; + + struct tm6000_input vinput[3]; + struct tm6000_input rinput; + + char *ir_codes; +}; + +static struct tm6000_board tm6000_boards[] = { + [TM6000_BOARD_UNKNOWN] = { + .name = "Unknown tm6000 video grabber", + .caps = { + .has_tuner = 1, + .has_eeprom = 1, + }, + .gpio = { + .tuner_reset = TM6000_GPIO_1, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM5600_BOARD_GENERIC] = { + .name = "Generic tm5600 board", + .type = TM5600, + .tuner_type = TUNER_XC2028, + .tuner_addr = 0xc2 >> 1, + .caps = { + .has_tuner = 1, + .has_eeprom = 1, + }, + .gpio = { + .tuner_reset = TM6000_GPIO_1, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6000_BOARD_GENERIC] = { + .name = "Generic tm6000 board", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0xc2 >> 1, + .caps = { + .has_tuner = 1, + .has_eeprom = 1, + }, + .gpio = { + .tuner_reset = TM6000_GPIO_1, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6010_BOARD_GENERIC] = { + .name = "Generic tm6010 board", + .type = TM6010, + .tuner_type = TUNER_XC2028, + .tuner_addr = 0xc2 >> 1, + .demod_addr = 0x1e >> 1, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 1, + .has_remote = 1, + }, + .gpio = { + .tuner_reset = TM6010_GPIO_2, + .tuner_on = TM6010_GPIO_3, + .demod_reset = TM6010_GPIO_1, + .demod_on = TM6010_GPIO_4, + .power_led = TM6010_GPIO_7, + .dvb_led = TM6010_GPIO_5, + .ir = TM6010_GPIO_0, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_SIF1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM5600_BOARD_10MOONS_UT821] = { + .name = "10Moons UT 821", + .tuner_type = TUNER_XC2028, + .eename = { '1', '0', 'M', 'O', 'O', 'N', 'S', '5', '6', '0', '0', 0xff, 0x45, 0x5b}, + .eename_size = 14, + .eename_pos = 0x14, + .type = TM5600, + .tuner_addr = 0xc2 >> 1, + .caps = { + .has_tuner = 1, + .has_eeprom = 1, + }, + .gpio = { + .tuner_reset = TM6000_GPIO_1, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM5600_BOARD_10MOONS_UT330] = { + .name = "10Moons UT 330", + .tuner_type = TUNER_PHILIPS_FQ1216AME_MK4, + .tuner_addr = 0xc8 >> 1, + .caps = { + .has_tuner = 1, + .has_dvb = 0, + .has_zl10353 = 0, + .has_eeprom = 1, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6000_BOARD_ADSTECH_DUAL_TV] = { + .name = "ADSTECH Dual TV USB", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0xc8 >> 1, + .caps = { + .has_tuner = 1, + .has_tda9874 = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 1, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6000_BOARD_FREECOM_AND_SIMILAR] = { + .name = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual", + .tuner_type = TUNER_XC2028, /* has a XC3028 */ + .tuner_addr = 0xc2 >> 1, + .demod_addr = 0x1e >> 1, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 0, + .has_remote = 1, + }, + .gpio = { + .tuner_reset = TM6000_GPIO_4, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = { + .name = "ADSTECH Mini Dual TV USB", + .tuner_type = TUNER_XC2028, /* has a XC3028 */ + .tuner_addr = 0xc8 >> 1, + .demod_addr = 0x1e >> 1, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 0, + }, + .gpio = { + .tuner_reset = TM6000_GPIO_4, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6010_BOARD_HAUPPAUGE_900H] = { + .name = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick", + .eename = { 'H', 0, 'V', 0, 'R', 0, '9', 0, '0', 0, '0', 0, 'H', 0 }, + .eename_size = 14, + .eename_pos = 0x42, + .tuner_type = TUNER_XC2028, /* has a XC3028 */ + .tuner_addr = 0xc2 >> 1, + .demod_addr = 0x1e >> 1, + .type = TM6010, + .ir_codes = RC_MAP_HAUPPAUGE, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 1, + .has_remote = 1, + }, + .gpio = { + .tuner_reset = TM6010_GPIO_2, + .tuner_on = TM6010_GPIO_3, + .demod_reset = TM6010_GPIO_1, + .demod_on = TM6010_GPIO_4, + .power_led = TM6010_GPIO_7, + .dvb_led = TM6010_GPIO_5, + .ir = TM6010_GPIO_0, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_SIF1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6010_BOARD_BEHOLD_WANDER] = { + .name = "Beholder Wander DVB-T/TV/FM USB2.0", + .tuner_type = TUNER_XC5000, + .tuner_addr = 0xc2 >> 1, + .demod_addr = 0x1e >> 1, + .type = TM6010, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 1, + .has_remote = 1, + .has_radio = 1, + }, + .gpio = { + .tuner_reset = TM6010_GPIO_0, + .demod_reset = TM6010_GPIO_1, + .power_led = TM6010_GPIO_6, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_SIF1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + .rinput = { + .type = TM6000_INPUT_RADIO, + .amux = TM6000_AMUX_ADC1, + }, + }, + [TM6010_BOARD_BEHOLD_VOYAGER] = { + .name = "Beholder Voyager TV/FM USB2.0", + .tuner_type = TUNER_XC5000, + .tuner_addr = 0xc2 >> 1, + .type = TM6010, + .caps = { + .has_tuner = 1, + .has_dvb = 0, + .has_zl10353 = 0, + .has_eeprom = 1, + .has_remote = 1, + .has_radio = 1, + }, + .gpio = { + .tuner_reset = TM6010_GPIO_0, + .power_led = TM6010_GPIO_6, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_SIF1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + .rinput = { + .type = TM6000_INPUT_RADIO, + .amux = TM6000_AMUX_ADC1, + }, + }, + [TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = { + .name = "Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick", + .tuner_type = TUNER_XC2028, /* has a XC3028 */ + .tuner_addr = 0xc2 >> 1, + .demod_addr = 0x1e >> 1, + .type = TM6010, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 1, + .has_remote = 1, + .has_radio = 1, + }, + .gpio = { + .tuner_reset = TM6010_GPIO_2, + .tuner_on = TM6010_GPIO_3, + .demod_reset = TM6010_GPIO_1, + .demod_on = TM6010_GPIO_4, + .power_led = TM6010_GPIO_7, + .dvb_led = TM6010_GPIO_5, + .ir = TM6010_GPIO_0, + }, + .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_SIF1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + .rinput = { + .type = TM6000_INPUT_RADIO, + .amux = TM6000_AMUX_SIF1, + }, + }, + [TM5600_BOARD_TERRATEC_GRABSTER] = { + .name = "Terratec Grabster AV 150/250 MX", + .type = TM5600, + .tuner_type = TUNER_ABSENT, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6010_BOARD_TWINHAN_TU501] = { + .name = "Twinhan TU501(704D1)", + .tuner_type = TUNER_XC2028, /* has a XC3028 */ + .tuner_addr = 0xc2 >> 1, + .demod_addr = 0x1e >> 1, + .type = TM6010, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 1, + .has_remote = 1, + }, + .gpio = { + .tuner_reset = TM6010_GPIO_2, + .tuner_on = TM6010_GPIO_3, + .demod_reset = TM6010_GPIO_1, + .demod_on = TM6010_GPIO_4, + .power_led = TM6010_GPIO_7, + .dvb_led = TM6010_GPIO_5, + .ir = TM6010_GPIO_0, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_SIF1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6010_BOARD_BEHOLD_WANDER_LITE] = { + .name = "Beholder Wander Lite DVB-T/TV/FM USB2.0", + .tuner_type = TUNER_XC5000, + .tuner_addr = 0xc2 >> 1, + .demod_addr = 0x1e >> 1, + .type = TM6010, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 1, + .has_remote = 0, + .has_radio = 1, + }, + .gpio = { + .tuner_reset = TM6010_GPIO_0, + .demod_reset = TM6010_GPIO_1, + .power_led = TM6010_GPIO_6, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_SIF1, + }, + }, + .rinput = { + .type = TM6000_INPUT_RADIO, + .amux = TM6000_AMUX_ADC1, + }, + }, + [TM6010_BOARD_BEHOLD_VOYAGER_LITE] = { + .name = "Beholder Voyager Lite TV/FM USB2.0", + .tuner_type = TUNER_XC5000, + .tuner_addr = 0xc2 >> 1, + .type = TM6010, + .caps = { + .has_tuner = 1, + .has_dvb = 0, + .has_zl10353 = 0, + .has_eeprom = 1, + .has_remote = 0, + .has_radio = 1, + }, + .gpio = { + .tuner_reset = TM6010_GPIO_0, + .power_led = TM6010_GPIO_6, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_SIF1, + }, + }, + .rinput = { + .type = TM6000_INPUT_RADIO, + .amux = TM6000_AMUX_ADC1, + }, + }, +}; + +/* table of devices that work with this driver */ +static const struct usb_device_id tm6000_id_table[] = { + { USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_GENERIC }, + { USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC }, + { USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV }, + { USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR }, + { USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV }, + { USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, + { USB_DEVICE(0x2040, 0x6601), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, + { USB_DEVICE(0x2040, 0x6610), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, + { USB_DEVICE(0x2040, 0x6611), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, + { USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER }, + { USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER }, + { USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE }, + { USB_DEVICE(0x0ccd, 0x00A5), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE }, + { USB_DEVICE(0x0ccd, 0x0079), .driver_info = TM5600_BOARD_TERRATEC_GRABSTER }, + { USB_DEVICE(0x13d3, 0x3240), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, + { USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, + { USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, + { USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, + { USB_DEVICE(0x6000, 0xdec2), .driver_info = TM6010_BOARD_BEHOLD_WANDER_LITE }, + { USB_DEVICE(0x6000, 0xdec3), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER_LITE }, + { } +}; +MODULE_DEVICE_TABLE(usb, tm6000_id_table); + +/* Control power led for show some activity */ +void tm6000_flash_led(struct tm6000_core *dev, u8 state) +{ + /* Power LED unconfigured */ + if (!dev->gpio.power_led) + return; + + /* ON Power LED */ + if (state) { + switch (dev->model) { + case TM6010_BOARD_HAUPPAUGE_900H: + case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: + case TM6010_BOARD_TWINHAN_TU501: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.power_led, 0x00); + break; + case TM6010_BOARD_BEHOLD_WANDER: + case TM6010_BOARD_BEHOLD_VOYAGER: + case TM6010_BOARD_BEHOLD_WANDER_LITE: + case TM6010_BOARD_BEHOLD_VOYAGER_LITE: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.power_led, 0x01); + break; + } + } + /* OFF Power LED */ + else { + switch (dev->model) { + case TM6010_BOARD_HAUPPAUGE_900H: + case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: + case TM6010_BOARD_TWINHAN_TU501: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.power_led, 0x01); + break; + case TM6010_BOARD_BEHOLD_WANDER: + case TM6010_BOARD_BEHOLD_VOYAGER: + case TM6010_BOARD_BEHOLD_WANDER_LITE: + case TM6010_BOARD_BEHOLD_VOYAGER_LITE: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.power_led, 0x00); + break; + } + } +} + +/* Tuner callback to provide the proper gpio changes needed for xc5000 */ +int tm6000_xc5000_callback(void *ptr, int component, int command, int arg) +{ + int rc = 0; + struct tm6000_core *dev = ptr; + + if (dev->tuner_type != TUNER_XC5000) + return 0; + + switch (command) { + case XC5000_TUNER_RESET: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x01); + msleep(15); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x00); + msleep(15); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x01); + break; + } + return rc; +} +EXPORT_SYMBOL_GPL(tm6000_xc5000_callback); + +/* Tuner callback to provide the proper gpio changes needed for xc2028 */ + +int tm6000_tuner_callback(void *ptr, int component, int command, int arg) +{ + int rc = 0; + struct tm6000_core *dev = ptr; + + if (dev->tuner_type != TUNER_XC2028) + return 0; + + switch (command) { + case XC2028_RESET_CLK: + tm6000_ir_wait(dev, 0); + + tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, + 0x02, arg); + msleep(10); + rc = tm6000_i2c_reset(dev, 10); + break; + case XC2028_TUNER_RESET: + /* Reset codes during load firmware */ + switch (arg) { + case 0: + /* newer tuner can faster reset */ + switch (dev->model) { + case TM5600_BOARD_10MOONS_UT821: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x01); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + 0x300, 0x01); + msleep(10); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x00); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + 0x300, 0x00); + msleep(10); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x01); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + 0x300, 0x01); + break; + case TM6010_BOARD_HAUPPAUGE_900H: + case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: + case TM6010_BOARD_TWINHAN_TU501: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x01); + msleep(60); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x00); + msleep(75); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x01); + msleep(60); + break; + default: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x00); + msleep(130); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x01); + msleep(130); + break; + } + + tm6000_ir_wait(dev, 1); + break; + case 1: + tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, + 0x02, 0x01); + msleep(10); + break; + case 2: + rc = tm6000_i2c_reset(dev, 100); + break; + } + break; + case XC2028_I2C_FLUSH: + tm6000_set_reg(dev, REQ_50_SET_START, 0, 0); + tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0); + break; + } + return rc; +} +EXPORT_SYMBOL_GPL(tm6000_tuner_callback); + +int tm6000_cards_setup(struct tm6000_core *dev) +{ + /* + * Board-specific initialization sequence. Handles all GPIO + * initialization sequences that are board-specific. + * Up to now, all found devices use GPIO1 and GPIO4 at the same way. + * Probably, they're all based on some reference device. Due to that, + * there's a common routine at the end to handle those GPIO's. Devices + * that use different pinups or init sequences can just return at + * the board-specific session. + */ + switch (dev->model) { + case TM6010_BOARD_HAUPPAUGE_900H: + case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: + case TM6010_BOARD_TWINHAN_TU501: + case TM6010_BOARD_GENERIC: + /* Turn xceive 3028 on */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01); + msleep(15); + /* Turn zarlink zl10353 on */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00); + msleep(15); + /* Reset zarlink zl10353 */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00); + msleep(50); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01); + msleep(15); + /* Turn zarlink zl10353 off */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01); + msleep(15); + /* ir ? */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01); + msleep(15); + /* Power led on (blue) */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00); + msleep(15); + /* DVB led off (orange) */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01); + msleep(15); + /* Turn zarlink zl10353 on */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00); + msleep(15); + break; + case TM6010_BOARD_BEHOLD_WANDER: + case TM6010_BOARD_BEHOLD_WANDER_LITE: + /* Power led on (blue) */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01); + msleep(15); + /* Reset zarlink zl10353 */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00); + msleep(50); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01); + msleep(15); + break; + case TM6010_BOARD_BEHOLD_VOYAGER: + case TM6010_BOARD_BEHOLD_VOYAGER_LITE: + /* Power led on (blue) */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01); + msleep(15); + break; + default: + break; + } + + /* + * Default initialization. Most of the devices seem to use GPIO1 + * and GPIO4.on the same way, so, this handles the common sequence + * used by most devices. + * If a device uses a different sequence or different GPIO pins for + * reset, just add the code at the board-specific part + */ + + if (dev->gpio.tuner_reset) { + int rc; + int i; + + for (i = 0; i < 2; i++) { + rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x00); + if (rc < 0) { + printk(KERN_ERR "Error %i doing tuner reset\n", rc); + return rc; + } + + msleep(10); /* Just to be conservative */ + rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x01); + if (rc < 0) { + printk(KERN_ERR "Error %i doing tuner reset\n", rc); + return rc; + } + } + } else { + printk(KERN_ERR "Tuner reset is not configured\n"); + return -1; + } + + msleep(50); + + return 0; +}; + +static void tm6000_config_tuner(struct tm6000_core *dev) +{ + struct tuner_setup tun_setup; + + /* Load tuner module */ + v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "tuner", dev->tuner_addr, NULL); + + memset(&tun_setup, 0, sizeof(tun_setup)); + tun_setup.type = dev->tuner_type; + tun_setup.addr = dev->tuner_addr; + + tun_setup.mode_mask = 0; + if (dev->caps.has_tuner) + tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO); + + switch (dev->tuner_type) { + case TUNER_XC2028: + tun_setup.tuner_callback = tm6000_tuner_callback; + break; + case TUNER_XC5000: + tun_setup.tuner_callback = tm6000_xc5000_callback; + break; + } + + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup); + + switch (dev->tuner_type) { + case TUNER_XC2028: { + struct v4l2_priv_tun_config xc2028_cfg; + struct xc2028_ctrl ctl; + + memset(&xc2028_cfg, 0, sizeof(xc2028_cfg)); + memset(&ctl, 0, sizeof(ctl)); + + ctl.demod = XC3028_FE_ZARLINK456; + + xc2028_cfg.tuner = TUNER_XC2028; + xc2028_cfg.priv = &ctl; + + switch (dev->model) { + case TM6010_BOARD_HAUPPAUGE_900H: + case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: + case TM6010_BOARD_TWINHAN_TU501: + ctl.max_len = 80; + ctl.fname = "xc3028L-v36.fw"; + break; + default: + if (dev->dev_type == TM6010) + ctl.fname = "xc3028-v27.fw"; + else + ctl.fname = "xc3028-v24.fw"; + } + + printk(KERN_INFO "Setting firmware parameters for xc2028\n"); + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, + &xc2028_cfg); + + } + break; + case TUNER_XC5000: + { + struct v4l2_priv_tun_config xc5000_cfg; + struct xc5000_config ctl = { + .i2c_address = dev->tuner_addr, + .if_khz = 4570, + .radio_input = XC5000_RADIO_FM1_MONO, + }; + + xc5000_cfg.tuner = TUNER_XC5000; + xc5000_cfg.priv = &ctl; + + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, + &xc5000_cfg); + } + break; + default: + printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n"); + break; + } +} + +static int fill_board_specific_data(struct tm6000_core *dev) +{ + int rc; + + dev->dev_type = tm6000_boards[dev->model].type; + dev->tuner_type = tm6000_boards[dev->model].tuner_type; + dev->tuner_addr = tm6000_boards[dev->model].tuner_addr; + + dev->gpio = tm6000_boards[dev->model].gpio; + + dev->ir_codes = tm6000_boards[dev->model].ir_codes; + + dev->demod_addr = tm6000_boards[dev->model].demod_addr; + + dev->caps = tm6000_boards[dev->model].caps; + + dev->vinput[0] = tm6000_boards[dev->model].vinput[0]; + dev->vinput[1] = tm6000_boards[dev->model].vinput[1]; + dev->vinput[2] = tm6000_boards[dev->model].vinput[2]; + dev->rinput = tm6000_boards[dev->model].rinput; + + /* setup per-model quirks */ + switch (dev->model) { + case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: + case TM6010_BOARD_HAUPPAUGE_900H: + dev->quirks |= TM6000_QUIRK_NO_USB_DELAY; + break; + + default: + break; + } + + /* initialize hardware */ + rc = tm6000_init(dev); + if (rc < 0) + return rc; + + return v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev); +} + + +static void use_alternative_detection_method(struct tm6000_core *dev) +{ + int i, model = -1; + + if (!dev->eedata_size) + return; + + for (i = 0; i < ARRAY_SIZE(tm6000_boards); i++) { + if (!tm6000_boards[i].eename_size) + continue; + if (dev->eedata_size < tm6000_boards[i].eename_pos + + tm6000_boards[i].eename_size) + continue; + + if (!memcmp(&dev->eedata[tm6000_boards[i].eename_pos], + tm6000_boards[i].eename, + tm6000_boards[i].eename_size)) { + model = i; + break; + } + } + if (model < 0) { + printk(KERN_INFO "Device has eeprom but is currently unknown\n"); + return; + } + + dev->model = model; + + printk(KERN_INFO "Device identified via eeprom as %s (type = %d)\n", + tm6000_boards[model].name, model); +} + +#if defined(CONFIG_MODULES) && defined(MODULE) +static void request_module_async(struct work_struct *work) +{ + struct tm6000_core *dev = container_of(work, struct tm6000_core, + request_module_wk); + + request_module("tm6000-alsa"); + + if (dev->caps.has_dvb) + request_module("tm6000-dvb"); +} + +static void request_modules(struct tm6000_core *dev) +{ + INIT_WORK(&dev->request_module_wk, request_module_async); + schedule_work(&dev->request_module_wk); +} + +static void flush_request_modules(struct tm6000_core *dev) +{ + flush_work(&dev->request_module_wk); +} +#else +#define request_modules(dev) +#define flush_request_modules(dev) +#endif /* CONFIG_MODULES */ + +static int tm6000_init_dev(struct tm6000_core *dev) +{ + struct v4l2_frequency f; + int rc = 0; + + mutex_init(&dev->lock); + mutex_lock(&dev->lock); + + if (!is_generic(dev->model)) { + rc = fill_board_specific_data(dev); + if (rc < 0) + goto err; + + /* register i2c bus */ + rc = tm6000_i2c_register(dev); + if (rc < 0) + goto err; + } else { + /* register i2c bus */ + rc = tm6000_i2c_register(dev); + if (rc < 0) + goto err; + + use_alternative_detection_method(dev); + + rc = fill_board_specific_data(dev); + if (rc < 0) + goto err; + } + + /* Default values for STD and resolutions */ + dev->width = 720; + dev->height = 480; + dev->norm = V4L2_STD_NTSC_M; + + /* Configure tuner */ + tm6000_config_tuner(dev); + + /* Set video standard */ + v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->norm); + + /* Set tuner frequency - also loads firmware on xc2028/xc3028 */ + f.tuner = 0; + f.type = V4L2_TUNER_ANALOG_TV; + f.frequency = 3092; /* 193.25 MHz */ + dev->freq = f.frequency; + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f); + + if (dev->caps.has_tda9874) + v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "tvaudio", I2C_ADDR_TDA9874, NULL); + + /* register and initialize V4L2 */ + rc = tm6000_v4l2_register(dev); + if (rc < 0) + goto err; + + tm6000_add_into_devlist(dev); + tm6000_init_extension(dev); + + tm6000_ir_init(dev); + + request_modules(dev); + + mutex_unlock(&dev->lock); + return 0; + +err: + mutex_unlock(&dev->lock); + return rc; +} + +/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ +#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) + +static void get_max_endpoint(struct usb_device *udev, + struct usb_host_interface *alt, + char *msgtype, + struct usb_host_endpoint *curr_e, + struct tm6000_endpoint *tm_ep) +{ + u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize); + unsigned int size = tmp & 0x7ff; + + if (udev->speed == USB_SPEED_HIGH) + size = size * hb_mult(tmp); + + if (size > tm_ep->maxsize) { + tm_ep->endp = curr_e; + tm_ep->maxsize = size; + tm_ep->bInterfaceNumber = alt->desc.bInterfaceNumber; + tm_ep->bAlternateSetting = alt->desc.bAlternateSetting; + + printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n", + msgtype, curr_e->desc.bEndpointAddress, + size); + } +} + +/* + * tm6000_usb_probe() + * checks for supported devices + */ +static int tm6000_usb_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *usbdev; + struct tm6000_core *dev; + int i, rc; + int nr = 0; + char *speed; + + usbdev = usb_get_dev(interface_to_usbdev(interface)); + + /* Selects the proper interface */ + rc = usb_set_interface(usbdev, 0, 1); + if (rc < 0) + goto report_failure; + + /* Check to see next free device and mark as used */ + nr = find_first_zero_bit(&tm6000_devused, TM6000_MAXBOARDS); + if (nr >= TM6000_MAXBOARDS) { + printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS); + rc = -ENOMEM; + goto put_device; + } + + /* Create and initialize dev struct */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + rc = -ENOMEM; + goto put_device; + } + spin_lock_init(&dev->slock); + mutex_init(&dev->usb_lock); + + /* Increment usage count */ + set_bit(nr, &tm6000_devused); + snprintf(dev->name, 29, "tm6000 #%d", nr); + + dev->model = id->driver_info; + if (card[nr] < ARRAY_SIZE(tm6000_boards)) + dev->model = card[nr]; + + dev->udev = usbdev; + dev->devno = nr; + + switch (usbdev->speed) { + case USB_SPEED_LOW: + speed = "1.5"; + break; + case USB_SPEED_UNKNOWN: + case USB_SPEED_FULL: + speed = "12"; + break; + case USB_SPEED_HIGH: + speed = "480"; + break; + default: + speed = "unknown"; + } + + /* Get endpoints */ + for (i = 0; i < interface->num_altsetting; i++) { + int ep; + + for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { + struct usb_host_endpoint *e; + int dir_out; + + e = &interface->altsetting[i].endpoint[ep]; + + dir_out = ((e->desc.bEndpointAddress & + USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); + + printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n", + i, + interface->altsetting[i].desc.bInterfaceNumber, + interface->altsetting[i].desc.bInterfaceClass); + + switch (e->desc.bmAttributes) { + case USB_ENDPOINT_XFER_BULK: + if (!dir_out) { + get_max_endpoint(usbdev, + &interface->altsetting[i], + "Bulk IN", e, + &dev->bulk_in); + } else { + get_max_endpoint(usbdev, + &interface->altsetting[i], + "Bulk OUT", e, + &dev->bulk_out); + } + break; + case USB_ENDPOINT_XFER_ISOC: + if (!dir_out) { + get_max_endpoint(usbdev, + &interface->altsetting[i], + "ISOC IN", e, + &dev->isoc_in); + } else { + get_max_endpoint(usbdev, + &interface->altsetting[i], + "ISOC OUT", e, + &dev->isoc_out); + } + break; + case USB_ENDPOINT_XFER_INT: + if (!dir_out) { + get_max_endpoint(usbdev, + &interface->altsetting[i], + "INT IN", e, + &dev->int_in); + } else { + get_max_endpoint(usbdev, + &interface->altsetting[i], + "INT OUT", e, + &dev->int_out); + } + break; + } + } + } + + + printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n", + speed, + le16_to_cpu(dev->udev->descriptor.idVendor), + le16_to_cpu(dev->udev->descriptor.idProduct), + interface->altsetting->desc.bInterfaceNumber); + +/* check if the the device has the iso in endpoint at the correct place */ + if (!dev->isoc_in.endp) { + printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n"); + rc = -ENODEV; + goto free_device; + } + + /* save our data pointer in this interface device */ + usb_set_intfdata(interface, dev); + + printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name); + + rc = tm6000_init_dev(dev); + if (rc < 0) + goto free_device; + + return 0; + +free_device: + kfree(dev); +report_failure: + printk(KERN_ERR "tm6000: Error %d while registering\n", rc); + + clear_bit(nr, &tm6000_devused); +put_device: + usb_put_dev(usbdev); + return rc; +} + +/* + * tm6000_usb_disconnect() + * called when the device gets disconnected + * video device will be unregistered on v4l2_close in case it is still open + */ +static void tm6000_usb_disconnect(struct usb_interface *interface) +{ + struct tm6000_core *dev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + if (!dev) + return; + + printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name); + + flush_request_modules(dev); + + tm6000_ir_fini(dev); + + if (dev->gpio.power_led) { + switch (dev->model) { + case TM6010_BOARD_HAUPPAUGE_900H: + case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: + case TM6010_BOARD_TWINHAN_TU501: + /* Power led off */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.power_led, 0x01); + msleep(15); + break; + case TM6010_BOARD_BEHOLD_WANDER: + case TM6010_BOARD_BEHOLD_VOYAGER: + case TM6010_BOARD_BEHOLD_WANDER_LITE: + case TM6010_BOARD_BEHOLD_VOYAGER_LITE: + /* Power led off */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.power_led, 0x00); + msleep(15); + break; + } + } + tm6000_v4l2_unregister(dev); + + tm6000_i2c_unregister(dev); + + v4l2_device_unregister(&dev->v4l2_dev); + + dev->state |= DEV_DISCONNECTED; + + usb_put_dev(dev->udev); + + tm6000_close_extension(dev); + tm6000_remove_from_devlist(dev); + + clear_bit(dev->devno, &tm6000_devused); + kfree(dev); +} + +static struct usb_driver tm6000_usb_driver = { + .name = "tm6000", + .probe = tm6000_usb_probe, + .disconnect = tm6000_usb_disconnect, + .id_table = tm6000_id_table, +}; + +module_usb_driver(tm6000_usb_driver); + +MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter"); +MODULE_AUTHOR("Mauro Carvalho Chehab"); +MODULE_LICENSE("GPL v2"); |