diff options
Diffstat (limited to 'drivers/staging/media/deprecated/vpfe_capture')
14 files changed, 6681 insertions, 0 deletions
diff --git a/drivers/staging/media/deprecated/vpfe_capture/Kconfig b/drivers/staging/media/deprecated/vpfe_capture/Kconfig new file mode 100644 index 000000000000..10250e7e566b --- /dev/null +++ b/drivers/staging/media/deprecated/vpfe_capture/Kconfig @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0-only +config VIDEO_DM6446_CCDC + tristate "TI DM6446 CCDC video capture driver" + depends on V4L_PLATFORM_DRIVERS + depends on VIDEO_DEV + depends on ARCH_DAVINCI || COMPILE_TEST + depends on I2C + select VIDEOBUF_DMA_CONTIG + help + Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from slave decoders. + + This driver is deprecated and is scheduled for removal by + the beginning of 2023. See the TODO file for more information. + + To compile this driver as a module, choose M here. There will + be two modules called vpfe_capture.ko and dm644x_ccdc.ko + +config VIDEO_DM355_CCDC + tristate "TI DM355 CCDC video capture driver" + depends on V4L_PLATFORM_DRIVERS + depends on VIDEO_DEV + depends on ARCH_DAVINCI || COMPILE_TEST + depends on I2C + select VIDEOBUF_DMA_CONTIG + help + Enables DM355 CCD hw module. DM355 CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from a slave decoders + + This driver is deprecated and is scheduled for removal by + the beginning of 2023. See the TODO file for more information. + + To compile this driver as a module, choose M here. There will + be two modules called vpfe_capture.ko and dm355_ccdc.ko + +config VIDEO_DM365_ISIF + tristate "TI DM365 ISIF video capture driver" + depends on V4L_PLATFORM_DRIVERS + depends on VIDEO_DEV + depends on ARCH_DAVINCI || COMPILE_TEST + depends on I2C + select VIDEOBUF_DMA_CONTIG + help + Enables ISIF hw module. This is the hardware module for + configuring ISIF in VPFE to capture Raw Bayer RGB data from + a image sensor or YUV data from a YUV source. + + This driver is deprecated and is scheduled for removal by + the beginning of 2023. See the TODO file for more information. + + To compile this driver as a module, choose M here. There will + be two modules called vpfe_capture.ko and isif.ko diff --git a/drivers/staging/media/deprecated/vpfe_capture/Makefile b/drivers/staging/media/deprecated/vpfe_capture/Makefile new file mode 100644 index 000000000000..609e8dc09ce7 --- /dev/null +++ b/drivers/staging/media/deprecated/vpfe_capture/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_VIDEO_DM6446_CCDC) += vpfe_capture.o dm644x_ccdc.o +obj-$(CONFIG_VIDEO_DM355_CCDC) += vpfe_capture.o dm355_ccdc.o +obj-$(CONFIG_VIDEO_DM365_ISIF) += vpfe_capture.o isif.o diff --git a/drivers/staging/media/deprecated/vpfe_capture/TODO b/drivers/staging/media/deprecated/vpfe_capture/TODO new file mode 100644 index 000000000000..ce654d7337af --- /dev/null +++ b/drivers/staging/media/deprecated/vpfe_capture/TODO @@ -0,0 +1,7 @@ +These are one of the few drivers still not using the vb2 +framework, so these drivers are now deprecated with the intent of +removing them altogether by the beginning of 2023. + +In order to keep these drivers they have to be converted to vb2. +If someone is interested in doing this work, then contact the +linux-media mailinglist (https://linuxtv.org/lists.php). diff --git a/drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h b/drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h new file mode 100644 index 000000000000..a545052a95a9 --- /dev/null +++ b/drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h @@ -0,0 +1,80 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * ccdc device API + */ +#ifndef _CCDC_HW_DEVICE_H +#define _CCDC_HW_DEVICE_H + +#ifdef __KERNEL__ +#include <linux/videodev2.h> +#include <linux/device.h> +#include <media/davinci/vpfe_types.h> +#include <media/davinci/ccdc_types.h> + +/* + * ccdc hw operations + */ +struct ccdc_hw_ops { + /* Pointer to initialize function to initialize ccdc device */ + int (*open) (struct device *dev); + /* Pointer to deinitialize function */ + int (*close) (struct device *dev); + /* set ccdc base address */ + void (*set_ccdc_base)(void *base, int size); + /* Pointer to function to enable or disable ccdc */ + void (*enable) (int en); + /* reset sbl. only for 6446 */ + void (*reset) (void); + /* enable output to sdram */ + void (*enable_out_to_sdram) (int en); + /* Pointer to function to set hw parameters */ + int (*set_hw_if_params) (struct vpfe_hw_if_param *param); + /* get interface parameters */ + int (*get_hw_if_params) (struct vpfe_hw_if_param *param); + /* Pointer to function to configure ccdc */ + int (*configure) (void); + + /* Pointer to function to set buffer type */ + int (*set_buftype) (enum ccdc_buftype buf_type); + /* Pointer to function to get buffer type */ + enum ccdc_buftype (*get_buftype) (void); + /* Pointer to function to set frame format */ + int (*set_frame_format) (enum ccdc_frmfmt frm_fmt); + /* Pointer to function to get frame format */ + enum ccdc_frmfmt (*get_frame_format) (void); + /* enumerate hw pix formats */ + int (*enum_pix)(u32 *hw_pix, int i); + /* Pointer to function to set buffer type */ + u32 (*get_pixel_format) (void); + /* Pointer to function to get pixel format. */ + int (*set_pixel_format) (u32 pixfmt); + /* Pointer to function to set image window */ + int (*set_image_window) (struct v4l2_rect *win); + /* Pointer to function to set image window */ + void (*get_image_window) (struct v4l2_rect *win); + /* Pointer to function to get line length */ + unsigned int (*get_line_length) (void); + + /* Pointer to function to set frame buffer address */ + void (*setfbaddr) (unsigned long addr); + /* Pointer to function to get field id */ + int (*getfid) (void); +}; + +struct ccdc_hw_device { + /* ccdc device name */ + char name[32]; + /* module owner */ + struct module *owner; + /* hw ops */ + struct ccdc_hw_ops hw_ops; +}; + +/* Used by CCDC module to register & unregister with vpfe capture driver */ +int vpfe_register_ccdc_device(const struct ccdc_hw_device *dev); +void vpfe_unregister_ccdc_device(const struct ccdc_hw_device *dev); + +#endif +#endif diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c new file mode 100644 index 000000000000..da8db53e9498 --- /dev/null +++ b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c @@ -0,0 +1,934 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2005-2009 Texas Instruments Inc + * + * CCDC hardware module for DM355 + * ------------------------------ + * + * This module is for configuring DM355 CCD controller of VPFE to capture + * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules + * such as Defect Pixel Correction, Color Space Conversion etc to + * pre-process the Bayer RGB data, before writing it to SDRAM. + * + * TODO: 1) Raw bayer parameter settings and bayer capture + * 2) Split module parameter structure to module specific ioctl structs + * 3) add support for lense shading correction + * 4) investigate if enum used for user space type definition + * to be replaced by #defines or integer + */ +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/videodev2.h> +#include <linux/err.h> +#include <linux/module.h> + +#include "dm355_ccdc.h" +#include <media/davinci/vpss.h> + +#include "dm355_ccdc_regs.h" +#include "ccdc_hw_device.h" + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("CCDC Driver for DM355"); +MODULE_AUTHOR("Texas Instruments"); + +static struct ccdc_oper_config { + struct device *dev; + /* CCDC interface type */ + enum vpfe_hw_if_type if_type; + /* Raw Bayer configuration */ + struct ccdc_params_raw bayer; + /* YCbCr configuration */ + struct ccdc_params_ycbcr ycbcr; + /* ccdc base address */ + void __iomem *base_addr; +} ccdc_cfg = { + /* Raw configurations */ + .bayer = { + .pix_fmt = CCDC_PIXFMT_RAW, + .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, + .win = CCDC_WIN_VGA, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .gain = { + .r_ye = 256, + .gb_g = 256, + .gr_cy = 256, + .b_mg = 256 + }, + .config_params = { + .datasft = 2, + .mfilt1 = CCDC_NO_MEDIAN_FILTER1, + .mfilt2 = CCDC_NO_MEDIAN_FILTER2, + .alaw = { + .gamma_wd = 2, + }, + .blk_clamp = { + .sample_pixel = 1, + .dc_sub = 25 + }, + .col_pat_field0 = { + .olop = CCDC_GREEN_BLUE, + .olep = CCDC_BLUE, + .elop = CCDC_RED, + .elep = CCDC_GREEN_RED + }, + .col_pat_field1 = { + .olop = CCDC_GREEN_BLUE, + .olep = CCDC_BLUE, + .elop = CCDC_RED, + .elep = CCDC_GREEN_RED + }, + }, + }, + /* YCbCr configuration */ + .ycbcr = { + .win = CCDC_WIN_PAL, + .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, + .frm_fmt = CCDC_FRMFMT_INTERLACED, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .bt656_enable = 1, + .pix_order = CCDC_PIXORDER_CBYCRY, + .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED + }, +}; + + +/* Raw Bayer formats */ +static u32 ccdc_raw_bayer_pix_formats[] = + {V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; + +/* Raw YUV formats */ +static u32 ccdc_raw_yuv_pix_formats[] = + {V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; + +/* register access routines */ +static inline u32 regr(u32 offset) +{ + return __raw_readl(ccdc_cfg.base_addr + offset); +} + +static inline void regw(u32 val, u32 offset) +{ + __raw_writel(val, ccdc_cfg.base_addr + offset); +} + +static void ccdc_enable(int en) +{ + unsigned int temp; + temp = regr(SYNCEN); + temp &= (~CCDC_SYNCEN_VDHDEN_MASK); + temp |= (en & CCDC_SYNCEN_VDHDEN_MASK); + regw(temp, SYNCEN); +} + +static void ccdc_enable_output_to_sdram(int en) +{ + unsigned int temp; + temp = regr(SYNCEN); + temp &= (~(CCDC_SYNCEN_WEN_MASK)); + temp |= ((en << CCDC_SYNCEN_WEN_SHIFT) & CCDC_SYNCEN_WEN_MASK); + regw(temp, SYNCEN); +} + +static void ccdc_config_gain_offset(void) +{ + /* configure gain */ + regw(ccdc_cfg.bayer.gain.r_ye, RYEGAIN); + regw(ccdc_cfg.bayer.gain.gr_cy, GRCYGAIN); + regw(ccdc_cfg.bayer.gain.gb_g, GBGGAIN); + regw(ccdc_cfg.bayer.gain.b_mg, BMGGAIN); + /* configure offset */ + regw(ccdc_cfg.bayer.ccdc_offset, OFFSET); +} + +/* + * ccdc_restore_defaults() + * This function restore power on defaults in the ccdc registers + */ +static int ccdc_restore_defaults(void) +{ + int i; + + dev_dbg(ccdc_cfg.dev, "\nstarting ccdc_restore_defaults..."); + /* set all registers to zero */ + for (i = 0; i <= CCDC_REG_LAST; i += 4) + regw(0, i); + + /* now override the values with power on defaults in registers */ + regw(MODESET_DEFAULT, MODESET); + /* no culling support */ + regw(CULH_DEFAULT, CULH); + regw(CULV_DEFAULT, CULV); + /* Set default Gain and Offset */ + ccdc_cfg.bayer.gain.r_ye = GAIN_DEFAULT; + ccdc_cfg.bayer.gain.gb_g = GAIN_DEFAULT; + ccdc_cfg.bayer.gain.gr_cy = GAIN_DEFAULT; + ccdc_cfg.bayer.gain.b_mg = GAIN_DEFAULT; + ccdc_config_gain_offset(); + regw(OUTCLIP_DEFAULT, OUTCLIP); + regw(LSCCFG2_DEFAULT, LSCCFG2); + /* select ccdc input */ + if (vpss_select_ccdc_source(VPSS_CCDCIN)) { + dev_dbg(ccdc_cfg.dev, "\ncouldn't select ccdc input source"); + return -EFAULT; + } + /* select ccdc clock */ + if (vpss_enable_clock(VPSS_CCDC_CLOCK, 1) < 0) { + dev_dbg(ccdc_cfg.dev, "\ncouldn't enable ccdc clock"); + return -EFAULT; + } + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_restore_defaults..."); + return 0; +} + +static int ccdc_open(struct device *device) +{ + return ccdc_restore_defaults(); +} + +static int ccdc_close(struct device *device) +{ + /* disable clock */ + vpss_enable_clock(VPSS_CCDC_CLOCK, 0); + /* do nothing for now */ + return 0; +} +/* + * ccdc_setwin() + * This function will configure the window size to + * be capture in CCDC reg. + */ +static void ccdc_setwin(struct v4l2_rect *image_win, + enum ccdc_frmfmt frm_fmt, int ppc) +{ + int horz_start, horz_nr_pixels; + int vert_start, vert_nr_lines; + int mid_img = 0; + + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin..."); + + /* + * ppc - per pixel count. indicates how many pixels per cell + * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. + * raw capture this is 1 + */ + horz_start = image_win->left << (ppc - 1); + horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1; + + /* Writing the horizontal info into the registers */ + regw(horz_start, SPH); + regw(horz_nr_pixels, NPH); + vert_start = image_win->top; + + if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + vert_nr_lines = (image_win->height >> 1) - 1; + vert_start >>= 1; + /* Since first line doesn't have any data */ + vert_start += 1; + /* configure VDINT0 and VDINT1 */ + regw(vert_start, VDINT0); + } else { + /* Since first line doesn't have any data */ + vert_start += 1; + vert_nr_lines = image_win->height - 1; + /* configure VDINT0 and VDINT1 */ + mid_img = vert_start + (image_win->height / 2); + regw(vert_start, VDINT0); + regw(mid_img, VDINT1); + } + regw(vert_start & CCDC_START_VER_ONE_MASK, SLV0); + regw(vert_start & CCDC_START_VER_TWO_MASK, SLV1); + regw(vert_nr_lines & CCDC_NUM_LINES_VER, NLV); + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin..."); +} + +/* This function will configure CCDC for YCbCr video capture */ +static void ccdc_config_ycbcr(void) +{ + struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr; + u32 temp; + + /* first set the CCDC power on defaults values in all registers */ + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr..."); + ccdc_restore_defaults(); + + /* configure pixel format & video frame format */ + temp = (((params->pix_fmt & CCDC_INPUT_MODE_MASK) << + CCDC_INPUT_MODE_SHIFT) | + ((params->frm_fmt & CCDC_FRM_FMT_MASK) << + CCDC_FRM_FMT_SHIFT)); + + /* setup BT.656 sync mode */ + if (params->bt656_enable) { + regw(CCDC_REC656IF_BT656_EN, REC656IF); + /* + * configure the FID, VD, HD pin polarity fld,hd pol positive, + * vd negative, 8-bit pack mode + */ + temp |= CCDC_VD_POL_NEGATIVE; + } else { /* y/c external sync mode */ + temp |= (((params->fid_pol & CCDC_FID_POL_MASK) << + CCDC_FID_POL_SHIFT) | + ((params->hd_pol & CCDC_HD_POL_MASK) << + CCDC_HD_POL_SHIFT) | + ((params->vd_pol & CCDC_VD_POL_MASK) << + CCDC_VD_POL_SHIFT)); + } + + /* pack the data to 8-bit */ + temp |= CCDC_DATA_PACK_ENABLE; + + regw(temp, MODESET); + + /* configure video window */ + ccdc_setwin(¶ms->win, params->frm_fmt, 2); + + /* configure the order of y cb cr in SD-RAM */ + temp = (params->pix_order << CCDC_Y8POS_SHIFT); + temp |= CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC; + regw(temp, CCDCFG); + + /* + * configure the horizontal line offset. This is done by rounding up + * width to a multiple of 16 pixels and multiply by two to account for + * y:cb:cr 4:2:2 data + */ + regw(((params->win.width * 2 + 31) >> 5), HSIZE); + + /* configure the memory line offset */ + if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) { + /* two fields are interleaved in memory */ + regw(CCDC_SDOFST_FIELD_INTERLEAVED, SDOFST); + } + + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n"); +} + +/* + * ccdc_config_black_clamp() + * configure parameters for Optical Black Clamp + */ +static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp) +{ + u32 val; + + if (!bclamp->b_clamp_enable) { + /* configure DCSub */ + regw(bclamp->dc_sub & CCDC_BLK_DC_SUB_MASK, DCSUB); + regw(0x0000, CLAMP); + return; + } + /* Enable the Black clamping, set sample lines and pixels */ + val = (bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) | + ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) << + CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE; + regw(val, CLAMP); + + /* If Black clamping is enable then make dcsub 0 */ + val = (bclamp->sample_ln & CCDC_NUM_LINE_CALC_MASK) + << CCDC_NUM_LINE_CALC_SHIFT; + regw(val, DCSUB); +} + +/* + * ccdc_config_black_compense() + * configure parameters for Black Compensation + */ +static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp) +{ + u32 val; + + val = (bcomp->b & CCDC_BLK_COMP_MASK) | + ((bcomp->gb & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GB_COMP_SHIFT); + regw(val, BLKCMP1); + + val = ((bcomp->gr & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GR_COMP_SHIFT) | + ((bcomp->r & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_R_COMP_SHIFT); + regw(val, BLKCMP0); +} + +/* + * ccdc_write_dfc_entry() + * write an entry in the dfc table. + */ +static int ccdc_write_dfc_entry(int index, struct ccdc_vertical_dft *dfc) +{ +/* TODO This is to be re-visited and adjusted */ +#define DFC_WRITE_WAIT_COUNT 1000 + u32 val, count = DFC_WRITE_WAIT_COUNT; + + regw(dfc->dft_corr_vert[index], DFCMEM0); + regw(dfc->dft_corr_horz[index], DFCMEM1); + regw(dfc->dft_corr_sub1[index], DFCMEM2); + regw(dfc->dft_corr_sub2[index], DFCMEM3); + regw(dfc->dft_corr_sub3[index], DFCMEM4); + /* set WR bit to write */ + val = regr(DFCMEMCTL) | CCDC_DFCMEMCTL_DFCMWR_MASK; + regw(val, DFCMEMCTL); + + /* + * Assume, it is very short. If we get an error, we need to + * adjust this value + */ + while (regr(DFCMEMCTL) & CCDC_DFCMEMCTL_DFCMWR_MASK) + count--; + /* + * TODO We expect the count to be non-zero to be successful. Adjust + * the count if write requires more time + */ + + if (count) { + dev_err(ccdc_cfg.dev, "defect table write timeout !!!\n"); + return -1; + } + return 0; +} + +/* + * ccdc_config_vdfc() + * configure parameters for Vertical Defect Correction + */ +static int ccdc_config_vdfc(struct ccdc_vertical_dft *dfc) +{ + u32 val; + int i; + + /* Configure General Defect Correction. The table used is from IPIPE */ + val = dfc->gen_dft_en & CCDC_DFCCTL_GDFCEN_MASK; + + /* Configure Vertical Defect Correction if needed */ + if (!dfc->ver_dft_en) { + /* Enable only General Defect Correction */ + regw(val, DFCCTL); + return 0; + } + + if (dfc->table_size > CCDC_DFT_TABLE_SIZE) + return -EINVAL; + + val |= CCDC_DFCCTL_VDFC_DISABLE; + val |= (dfc->dft_corr_ctl.vdfcsl & CCDC_DFCCTL_VDFCSL_MASK) << + CCDC_DFCCTL_VDFCSL_SHIFT; + val |= (dfc->dft_corr_ctl.vdfcuda & CCDC_DFCCTL_VDFCUDA_MASK) << + CCDC_DFCCTL_VDFCUDA_SHIFT; + val |= (dfc->dft_corr_ctl.vdflsft & CCDC_DFCCTL_VDFLSFT_MASK) << + CCDC_DFCCTL_VDFLSFT_SHIFT; + regw(val , DFCCTL); + + /* clear address ptr to offset 0 */ + val = CCDC_DFCMEMCTL_DFCMARST_MASK << CCDC_DFCMEMCTL_DFCMARST_SHIFT; + + /* write defect table entries */ + for (i = 0; i < dfc->table_size; i++) { + /* increment address for non zero index */ + if (i != 0) + val = CCDC_DFCMEMCTL_INC_ADDR; + regw(val, DFCMEMCTL); + if (ccdc_write_dfc_entry(i, dfc) < 0) + return -EFAULT; + } + + /* update saturation level and enable dfc */ + regw(dfc->saturation_ctl & CCDC_VDC_DFCVSAT_MASK, DFCVSAT); + val = regr(DFCCTL) | (CCDC_DFCCTL_VDFCEN_MASK << + CCDC_DFCCTL_VDFCEN_SHIFT); + regw(val, DFCCTL); + return 0; +} + +/* + * ccdc_config_csc() + * configure parameters for color space conversion + * Each register CSCM0-7 has two values in S8Q5 format. + */ +static void ccdc_config_csc(struct ccdc_csc *csc) +{ + u32 val1 = 0, val2; + int i; + + if (!csc->enable) + return; + + /* Enable the CSC sub-module */ + regw(CCDC_CSC_ENABLE, CSCCTL); + + /* Converting the co-eff as per the format of the register */ + for (i = 0; i < CCDC_CSC_COEFF_TABLE_SIZE; i++) { + if ((i % 2) == 0) { + /* CSCM - LSB */ + val1 = (csc->coeff[i].integer & + CCDC_CSC_COEF_INTEG_MASK) + << CCDC_CSC_COEF_INTEG_SHIFT; + /* + * convert decimal part to binary. Use 2 decimal + * precision, user values range from .00 - 0.99 + */ + val1 |= (((csc->coeff[i].decimal & + CCDC_CSC_COEF_DECIMAL_MASK) * + CCDC_CSC_DEC_MAX) / 100); + } else { + + /* CSCM - MSB */ + val2 = (csc->coeff[i].integer & + CCDC_CSC_COEF_INTEG_MASK) + << CCDC_CSC_COEF_INTEG_SHIFT; + val2 |= (((csc->coeff[i].decimal & + CCDC_CSC_COEF_DECIMAL_MASK) * + CCDC_CSC_DEC_MAX) / 100); + val2 <<= CCDC_CSCM_MSB_SHIFT; + val2 |= val1; + regw(val2, (CSCM0 + ((i - 1) << 1))); + } + } +} + +/* + * ccdc_config_color_patterns() + * configure parameters for color patterns + */ +static void ccdc_config_color_patterns(struct ccdc_col_pat *pat0, + struct ccdc_col_pat *pat1) +{ + u32 val; + + val = (pat0->olop | (pat0->olep << 2) | (pat0->elop << 4) | + (pat0->elep << 6) | (pat1->olop << 8) | (pat1->olep << 10) | + (pat1->elop << 12) | (pat1->elep << 14)); + regw(val, COLPTN); +} + +/* This function will configure CCDC for Raw mode image capture */ +static int ccdc_config_raw(void) +{ + struct ccdc_params_raw *params = &ccdc_cfg.bayer; + struct ccdc_config_params_raw *config_params = + &ccdc_cfg.bayer.config_params; + unsigned int val; + + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw..."); + + /* restore power on defaults to register */ + ccdc_restore_defaults(); + + /* CCDCFG register: + * set CCD Not to swap input since input is RAW data + * set FID detection function to Latch at V-Sync + * set WENLOG - ccdc valid area to AND + * set TRGSEL to WENBIT + * set EXTRG to DISABLE + * disable latching function on VSYNC - shadowed registers + */ + regw(CCDC_YCINSWP_RAW | CCDC_CCDCFG_FIDMD_LATCH_VSYNC | + CCDC_CCDCFG_WENLOG_AND | CCDC_CCDCFG_TRGSEL_WEN | + CCDC_CCDCFG_EXTRG_DISABLE | CCDC_LATCH_ON_VSYNC_DISABLE, CCDCFG); + + /* + * Set VDHD direction to input, input type to raw input + * normal data polarity, do not use external WEN + */ + val = (CCDC_VDHDOUT_INPUT | CCDC_RAW_IP_MODE | CCDC_DATAPOL_NORMAL | + CCDC_EXWEN_DISABLE); + + /* + * Configure the vertical sync polarity (MODESET.VDPOL), horizontal + * sync polarity (MODESET.HDPOL), field id polarity (MODESET.FLDPOL), + * frame format(progressive or interlace), & pixel format (Input mode) + */ + val |= (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) | + ((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) | + ((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) | + ((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) | + ((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT)); + + /* set pack for alaw compression */ + if ((config_params->data_sz == CCDC_DATA_8BITS) || + config_params->alaw.enable) + val |= CCDC_DATA_PACK_ENABLE; + + /* Configure for LPF */ + if (config_params->lpf_enable) + val |= (config_params->lpf_enable & CCDC_LPF_MASK) << + CCDC_LPF_SHIFT; + + /* Configure the data shift */ + val |= (config_params->datasft & CCDC_DATASFT_MASK) << + CCDC_DATASFT_SHIFT; + regw(val , MODESET); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to MODESET...\n", val); + + /* Configure the Median Filter threshold */ + regw((config_params->med_filt_thres) & CCDC_MED_FILT_THRESH, MEDFILT); + + /* Configure GAMMAWD register. defaur 11-2, and Mosaic cfa pattern */ + val = CCDC_GAMMA_BITS_11_2 << CCDC_GAMMAWD_INPUT_SHIFT | + CCDC_CFA_MOSAIC; + + /* Enable and configure aLaw register if needed */ + if (config_params->alaw.enable) { + val |= (CCDC_ALAW_ENABLE | + ((config_params->alaw.gamma_wd & + CCDC_ALAW_GAMMA_WD_MASK) << + CCDC_GAMMAWD_INPUT_SHIFT)); + } + + /* Configure Median filter1 & filter2 */ + val |= ((config_params->mfilt1 << CCDC_MFILT1_SHIFT) | + (config_params->mfilt2 << CCDC_MFILT2_SHIFT)); + + regw(val, GAMMAWD); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to GAMMAWD...\n", val); + + /* configure video window */ + ccdc_setwin(¶ms->win, params->frm_fmt, 1); + + /* Optical Clamp Averaging */ + ccdc_config_black_clamp(&config_params->blk_clamp); + + /* Black level compensation */ + ccdc_config_black_compense(&config_params->blk_comp); + + /* Vertical Defect Correction if needed */ + if (ccdc_config_vdfc(&config_params->vertical_dft) < 0) + return -EFAULT; + + /* color space conversion */ + ccdc_config_csc(&config_params->csc); + + /* color pattern */ + ccdc_config_color_patterns(&config_params->col_pat_field0, + &config_params->col_pat_field1); + + /* Configure the Gain & offset control */ + ccdc_config_gain_offset(); + + dev_dbg(ccdc_cfg.dev, "\nWriting %x to COLPTN...\n", val); + + /* Configure DATAOFST register */ + val = (config_params->data_offset.horz_offset & CCDC_DATAOFST_MASK) << + CCDC_DATAOFST_H_SHIFT; + val |= (config_params->data_offset.vert_offset & CCDC_DATAOFST_MASK) << + CCDC_DATAOFST_V_SHIFT; + regw(val, DATAOFST); + + /* configuring HSIZE register */ + val = (params->horz_flip_enable & CCDC_HSIZE_FLIP_MASK) << + CCDC_HSIZE_FLIP_SHIFT; + + /* If pack 8 is enable then 1 pixel will take 1 byte */ + if ((config_params->data_sz == CCDC_DATA_8BITS) || + config_params->alaw.enable) { + val |= (((params->win.width) + 31) >> 5) & + CCDC_HSIZE_VAL_MASK; + + /* adjust to multiple of 32 */ + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n", + (((params->win.width) + 31) >> 5) & + CCDC_HSIZE_VAL_MASK); + } else { + /* else one pixel will take 2 byte */ + val |= (((params->win.width * 2) + 31) >> 5) & + CCDC_HSIZE_VAL_MASK; + + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n", + (((params->win.width * 2) + 31) >> 5) & + CCDC_HSIZE_VAL_MASK); + } + regw(val, HSIZE); + + /* Configure SDOFST register */ + if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { + if (params->image_invert_enable) { + /* For interlace inverse mode */ + regw(CCDC_SDOFST_INTERLACE_INVERSE, SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", + CCDC_SDOFST_INTERLACE_INVERSE); + } else { + /* For interlace non inverse mode */ + regw(CCDC_SDOFST_INTERLACE_NORMAL, SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", + CCDC_SDOFST_INTERLACE_NORMAL); + } + } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { + if (params->image_invert_enable) { + /* For progessive inverse mode */ + regw(CCDC_SDOFST_PROGRESSIVE_INVERSE, SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", + CCDC_SDOFST_PROGRESSIVE_INVERSE); + } else { + /* For progessive non inverse mode */ + regw(CCDC_SDOFST_PROGRESSIVE_NORMAL, SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", + CCDC_SDOFST_PROGRESSIVE_NORMAL); + } + } + dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw..."); + return 0; +} + +static int ccdc_configure(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc_config_raw(); + else + ccdc_config_ycbcr(); + return 0; +} + +static int ccdc_set_buftype(enum ccdc_buftype buf_type) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.buf_type = buf_type; + else + ccdc_cfg.ycbcr.buf_type = buf_type; + return 0; +} +static enum ccdc_buftype ccdc_get_buftype(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc_cfg.bayer.buf_type; + return ccdc_cfg.ycbcr.buf_type; +} + +static int ccdc_enum_pix(u32 *pix, int i) +{ + int ret = -EINVAL; + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) { + *pix = ccdc_raw_bayer_pix_formats[i]; + ret = 0; + } + } else { + if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) { + *pix = ccdc_raw_yuv_pix_formats[i]; + ret = 0; + } + } + return ret; +} + +static int ccdc_set_pixel_format(u32 pixfmt) +{ + struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw; + + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; + if (pixfmt == V4L2_PIX_FMT_SBGGR8) + alaw->enable = 1; + else if (pixfmt != V4L2_PIX_FMT_SBGGR16) + return -EINVAL; + } else { + if (pixfmt == V4L2_PIX_FMT_YUYV) + ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; + else if (pixfmt == V4L2_PIX_FMT_UYVY) + ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + else + return -EINVAL; + } + return 0; +} +static u32 ccdc_get_pixel_format(void) +{ + struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw; + u32 pixfmt; + + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + if (alaw->enable) + pixfmt = V4L2_PIX_FMT_SBGGR8; + else + pixfmt = V4L2_PIX_FMT_SBGGR16; + else { + if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) + pixfmt = V4L2_PIX_FMT_YUYV; + else + pixfmt = V4L2_PIX_FMT_UYVY; + } + return pixfmt; +} +static int ccdc_set_image_window(struct v4l2_rect *win) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.win = *win; + else + ccdc_cfg.ycbcr.win = *win; + return 0; +} + +static void ccdc_get_image_window(struct v4l2_rect *win) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + *win = ccdc_cfg.bayer.win; + else + *win = ccdc_cfg.ycbcr.win; +} + +static unsigned int ccdc_get_line_length(void) +{ + struct ccdc_config_params_raw *config_params = + &ccdc_cfg.bayer.config_params; + unsigned int len; + + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + if ((config_params->alaw.enable) || + (config_params->data_sz == CCDC_DATA_8BITS)) + len = ccdc_cfg.bayer.win.width; + else + len = ccdc_cfg.bayer.win.width * 2; + } else + len = ccdc_cfg.ycbcr.win.width * 2; + return ALIGN(len, 32); +} + +static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.frm_fmt = frm_fmt; + else + ccdc_cfg.ycbcr.frm_fmt = frm_fmt; + return 0; +} + +static enum ccdc_frmfmt ccdc_get_frame_format(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc_cfg.bayer.frm_fmt; + else + return ccdc_cfg.ycbcr.frm_fmt; +} + +static int ccdc_getfid(void) +{ + return (regr(MODESET) >> 15) & 1; +} + +/* misc operations */ +static inline void ccdc_setfbaddr(unsigned long addr) +{ + regw((addr >> 21) & 0x007f, STADRH); + regw((addr >> 5) & 0x0ffff, STADRL); +} + +static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params) +{ + ccdc_cfg.if_type = params->if_type; + + switch (params->if_type) { + case VPFE_BT656: + case VPFE_YCBCR_SYNC_16: + case VPFE_YCBCR_SYNC_8: + ccdc_cfg.ycbcr.vd_pol = params->vdpol; + ccdc_cfg.ycbcr.hd_pol = params->hdpol; + break; + default: + /* TODO add support for raw bayer here */ + return -EINVAL; + } + return 0; +} + +static const struct ccdc_hw_device ccdc_hw_dev = { + .name = "DM355 CCDC", + .owner = THIS_MODULE, + .hw_ops = { + .open = ccdc_open, + .close = ccdc_close, + .enable = ccdc_enable, + .enable_out_to_sdram = ccdc_enable_output_to_sdram, + .set_hw_if_params = ccdc_set_hw_if_params, + .configure = ccdc_configure, + .set_buftype = ccdc_set_buftype, + .get_buftype = ccdc_get_buftype, + .enum_pix = ccdc_enum_pix, + .set_pixel_format = ccdc_set_pixel_format, + .get_pixel_format = ccdc_get_pixel_format, + .set_frame_format = ccdc_set_frame_format, + .get_frame_format = ccdc_get_frame_format, + .set_image_window = ccdc_set_image_window, + .get_image_window = ccdc_get_image_window, + .get_line_length = ccdc_get_line_length, + .setfbaddr = ccdc_setfbaddr, + .getfid = ccdc_getfid, + }, +}; + +static int dm355_ccdc_probe(struct platform_device *pdev) +{ + void (*setup_pinmux)(void); + struct resource *res; + int status = 0; + + /* + * first try to register with vpfe. If not correct platform, then we + * don't have to iomap + */ + status = vpfe_register_ccdc_device(&ccdc_hw_dev); + if (status < 0) + return status; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + status = -ENODEV; + goto fail_nores; + } + + res = request_mem_region(res->start, resource_size(res), res->name); + if (!res) { + status = -EBUSY; + goto fail_nores; + } + + ccdc_cfg.base_addr = ioremap(res->start, resource_size(res)); + if (!ccdc_cfg.base_addr) { + status = -ENOMEM; + goto fail_nomem; + } + + /* Platform data holds setup_pinmux function ptr */ + if (NULL == pdev->dev.platform_data) { + status = -ENODEV; + goto fail_nomap; + } + setup_pinmux = pdev->dev.platform_data; + /* + * setup Mux configuration for ccdc which may be different for + * different SoCs using this CCDC + */ + setup_pinmux(); + ccdc_cfg.dev = &pdev->dev; + printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name); + return 0; +fail_nomap: + iounmap(ccdc_cfg.base_addr); +fail_nomem: + release_mem_region(res->start, resource_size(res)); +fail_nores: + vpfe_unregister_ccdc_device(&ccdc_hw_dev); + return status; +} + +static int dm355_ccdc_remove(struct platform_device *pdev) +{ + struct resource *res; + + iounmap(ccdc_cfg.base_addr); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + vpfe_unregister_ccdc_device(&ccdc_hw_dev); + return 0; +} + +static struct platform_driver dm355_ccdc_driver = { + .driver = { + .name = "dm355_ccdc", + }, + .remove = dm355_ccdc_remove, + .probe = dm355_ccdc_probe, +}; + +module_platform_driver(dm355_ccdc_driver); diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h new file mode 100644 index 000000000000..1f3d00aa46d1 --- /dev/null +++ b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h @@ -0,0 +1,308 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2005-2009 Texas Instruments Inc + */ +#ifndef _DM355_CCDC_H +#define _DM355_CCDC_H +#include <media/davinci/ccdc_types.h> +#include <media/davinci/vpfe_types.h> + +/* enum for No of pixel per line to be avg. in Black Clamping */ +enum ccdc_sample_length { + CCDC_SAMPLE_1PIXELS, + CCDC_SAMPLE_2PIXELS, + CCDC_SAMPLE_4PIXELS, + CCDC_SAMPLE_8PIXELS, + CCDC_SAMPLE_16PIXELS +}; + +/* enum for No of lines in Black Clamping */ +enum ccdc_sample_line { + CCDC_SAMPLE_1LINES, + CCDC_SAMPLE_2LINES, + CCDC_SAMPLE_4LINES, + CCDC_SAMPLE_8LINES, + CCDC_SAMPLE_16LINES +}; + +/* enum for Alaw gamma width */ +enum ccdc_gamma_width { + CCDC_GAMMA_BITS_13_4, + CCDC_GAMMA_BITS_12_3, + CCDC_GAMMA_BITS_11_2, + CCDC_GAMMA_BITS_10_1, + CCDC_GAMMA_BITS_09_0 +}; + +enum ccdc_colpats { + CCDC_RED, + CCDC_GREEN_RED, + CCDC_GREEN_BLUE, + CCDC_BLUE +}; + +struct ccdc_col_pat { + enum ccdc_colpats olop; + enum ccdc_colpats olep; + enum ccdc_colpats elop; + enum ccdc_colpats elep; +}; + +enum ccdc_datasft { + CCDC_DATA_NO_SHIFT, + CCDC_DATA_SHIFT_1BIT, + CCDC_DATA_SHIFT_2BIT, + CCDC_DATA_SHIFT_3BIT, + CCDC_DATA_SHIFT_4BIT, + CCDC_DATA_SHIFT_5BIT, + CCDC_DATA_SHIFT_6BIT +}; + +enum ccdc_data_size { + CCDC_DATA_16BITS, + CCDC_DATA_15BITS, + CCDC_DATA_14BITS, + CCDC_DATA_13BITS, + CCDC_DATA_12BITS, + CCDC_DATA_11BITS, + CCDC_DATA_10BITS, + CCDC_DATA_8BITS +}; +enum ccdc_mfilt1 { + CCDC_NO_MEDIAN_FILTER1, + CCDC_AVERAGE_FILTER1, + CCDC_MEDIAN_FILTER1 +}; + +enum ccdc_mfilt2 { + CCDC_NO_MEDIAN_FILTER2, + CCDC_AVERAGE_FILTER2, + CCDC_MEDIAN_FILTER2 +}; + +/* structure for ALaw */ +struct ccdc_a_law { + /* Enable/disable A-Law */ + unsigned char enable; + /* Gamma Width Input */ + enum ccdc_gamma_width gamma_wd; +}; + +/* structure for Black Clamping */ +struct ccdc_black_clamp { + /* only if bClampEnable is TRUE */ + unsigned char b_clamp_enable; + /* only if bClampEnable is TRUE */ + enum ccdc_sample_length sample_pixel; + /* only if bClampEnable is TRUE */ + enum ccdc_sample_line sample_ln; + /* only if bClampEnable is TRUE */ + unsigned short start_pixel; + /* only if bClampEnable is FALSE */ + unsigned short sgain; + unsigned short dc_sub; +}; + +/* structure for Black Level Compensation */ +struct ccdc_black_compensation { + /* Constant value to subtract from Red component */ + unsigned char r; + /* Constant value to subtract from Gr component */ + unsigned char gr; + /* Constant value to subtract from Blue component */ + unsigned char b; + /* Constant value to subtract from Gb component */ + unsigned char gb; +}; + +struct ccdc_float { + int integer; + unsigned int decimal; +}; + +#define CCDC_CSC_COEFF_TABLE_SIZE 16 +/* structure for color space converter */ +struct ccdc_csc { + unsigned char enable; + /* + * S8Q5. Use 2 decimal precision, user values range from -3.00 to 3.99. + * example - to use 1.03, set integer part as 1, and decimal part as 3 + * to use -1.03, set integer part as -1 and decimal part as 3 + */ + struct ccdc_float coeff[CCDC_CSC_COEFF_TABLE_SIZE]; +}; + +/* Structures for Vertical Defect Correction*/ +enum ccdc_vdf_csl { + CCDC_VDF_NORMAL, + CCDC_VDF_HORZ_INTERPOL_SAT, + CCDC_VDF_HORZ_INTERPOL +}; + +enum ccdc_vdf_cuda { + CCDC_VDF_WHOLE_LINE_CORRECT, + CCDC_VDF_UPPER_DISABLE +}; + +enum ccdc_dfc_mwr { + CCDC_DFC_MWR_WRITE_COMPLETE, + CCDC_DFC_WRITE_REG +}; + +enum ccdc_dfc_mrd { + CCDC_DFC_READ_COMPLETE, + CCDC_DFC_READ_REG +}; + +enum ccdc_dfc_ma_rst { + CCDC_DFC_INCR_ADDR, + CCDC_DFC_CLR_ADDR +}; + +enum ccdc_dfc_mclr { + CCDC_DFC_CLEAR_COMPLETE, + CCDC_DFC_CLEAR +}; + +struct ccdc_dft_corr_ctl { + enum ccdc_vdf_csl vdfcsl; + enum ccdc_vdf_cuda vdfcuda; + unsigned int vdflsft; +}; + +struct ccdc_dft_corr_mem_ctl { + enum ccdc_dfc_mwr dfcmwr; + enum ccdc_dfc_mrd dfcmrd; + enum ccdc_dfc_ma_rst dfcmarst; + enum ccdc_dfc_mclr dfcmclr; +}; + +#define CCDC_DFT_TABLE_SIZE 16 +/* + * Main Structure for vertical defect correction. Vertical defect + * correction can correct up to 16 defects if defects less than 16 + * then pad the rest with 0 + */ +struct ccdc_vertical_dft { + unsigned char ver_dft_en; + unsigned char gen_dft_en; + unsigned int saturation_ctl; + struct ccdc_dft_corr_ctl dft_corr_ctl; + struct ccdc_dft_corr_mem_ctl dft_corr_mem_ctl; + int table_size; + unsigned int dft_corr_horz[CCDC_DFT_TABLE_SIZE]; + unsigned int dft_corr_vert[CCDC_DFT_TABLE_SIZE]; + unsigned int dft_corr_sub1[CCDC_DFT_TABLE_SIZE]; + unsigned int dft_corr_sub2[CCDC_DFT_TABLE_SIZE]; + unsigned int dft_corr_sub3[CCDC_DFT_TABLE_SIZE]; +}; + +struct ccdc_data_offset { + unsigned char horz_offset; + unsigned char vert_offset; +}; + +/* + * Structure for CCDC configuration parameters for raw capture mode passed + * by application + */ +struct ccdc_config_params_raw { + /* data shift to be applied before storing */ + enum ccdc_datasft datasft; + /* data size value from 8 to 16 bits */ + enum ccdc_data_size data_sz; + /* median filter for sdram */ + enum ccdc_mfilt1 mfilt1; + enum ccdc_mfilt2 mfilt2; + /* low pass filter enable/disable */ + unsigned char lpf_enable; + /* Threshold of median filter */ + int med_filt_thres; + /* + * horz and vertical data offset. Applicable for defect correction + * and lsc + */ + struct ccdc_data_offset data_offset; + /* Structure for Optional A-Law */ + struct ccdc_a_law alaw; + /* Structure for Optical Black Clamp */ + struct ccdc_black_clamp blk_clamp; + /* Structure for Black Compensation */ + struct ccdc_black_compensation blk_comp; + /* structure for vertical Defect Correction Module Configuration */ + struct ccdc_vertical_dft vertical_dft; + /* structure for color space converter Module Configuration */ + struct ccdc_csc csc; + /* color patters for bayer capture */ + struct ccdc_col_pat col_pat_field0; + struct ccdc_col_pat col_pat_field1; +}; + +#ifdef __KERNEL__ +#include <linux/io.h> + +#define CCDC_WIN_PAL {0, 0, 720, 576} +#define CCDC_WIN_VGA {0, 0, 640, 480} + +struct ccdc_params_ycbcr { + /* pixel format */ + enum ccdc_pixfmt pix_fmt; + /* progressive or interlaced frame */ + enum ccdc_frmfmt frm_fmt; + /* video window */ + struct v4l2_rect win; + /* field id polarity */ + enum vpfe_pin_pol fid_pol; + /* vertical sync polarity */ + enum vpfe_pin_pol vd_pol; + /* horizontal sync polarity */ + enum vpfe_pin_pol hd_pol; + /* enable BT.656 embedded sync mode */ + int bt656_enable; + /* cb:y:cr:y or y:cb:y:cr in memory */ + enum ccdc_pixorder pix_order; + /* interleaved or separated fields */ + enum ccdc_buftype buf_type; +}; + +/* Gain applied to Raw Bayer data */ +struct ccdc_gain { + unsigned short r_ye; + unsigned short gr_cy; + unsigned short gb_g; + unsigned short b_mg; +}; + +/* Structure for CCDC configuration parameters for raw capture mode */ +struct ccdc_params_raw { + /* pixel format */ + enum ccdc_pixfmt pix_fmt; + /* progressive or interlaced frame */ + enum ccdc_frmfmt frm_fmt; + /* video window */ + struct v4l2_rect win; + /* field id polarity */ + enum vpfe_pin_pol fid_pol; + /* vertical sync polarity */ + enum vpfe_pin_pol vd_pol; + /* horizontal sync polarity */ + enum vpfe_pin_pol hd_pol; + /* interleaved or separated fields */ + enum ccdc_buftype buf_type; + /* Gain values */ + struct ccdc_gain gain; + /* offset */ + unsigned int ccdc_offset; + /* horizontal flip enable */ + unsigned char horz_flip_enable; + /* + * enable to store the image in inverse order in memory + * (bottom to top) + */ + unsigned char image_invert_enable; + /* Configurable part of raw data */ + struct ccdc_config_params_raw config_params; +}; + +#endif +#endif /* DM355_CCDC_H */ diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h new file mode 100644 index 000000000000..eb381f075245 --- /dev/null +++ b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h @@ -0,0 +1,297 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2005-2009 Texas Instruments Inc + */ +#ifndef _DM355_CCDC_REGS_H +#define _DM355_CCDC_REGS_H + +/**************************************************************************\ +* Register OFFSET Definitions +\**************************************************************************/ +#define SYNCEN 0x00 +#define MODESET 0x04 +#define HDWIDTH 0x08 +#define VDWIDTH 0x0c +#define PPLN 0x10 +#define LPFR 0x14 +#define SPH 0x18 +#define NPH 0x1c +#define SLV0 0x20 +#define SLV1 0x24 +#define NLV 0x28 +#define CULH 0x2c +#define CULV 0x30 +#define HSIZE 0x34 +#define SDOFST 0x38 +#define STADRH 0x3c +#define STADRL 0x40 +#define CLAMP 0x44 +#define DCSUB 0x48 +#define COLPTN 0x4c +#define BLKCMP0 0x50 +#define BLKCMP1 0x54 +#define MEDFILT 0x58 +#define RYEGAIN 0x5c +#define GRCYGAIN 0x60 +#define GBGGAIN 0x64 +#define BMGGAIN 0x68 +#define OFFSET 0x6c +#define OUTCLIP 0x70 +#define VDINT0 0x74 +#define VDINT1 0x78 +#define RSV0 0x7c +#define GAMMAWD 0x80 +#define REC656IF 0x84 +#define CCDCFG 0x88 +#define FMTCFG 0x8c +#define FMTPLEN 0x90 +#define FMTSPH 0x94 +#define FMTLNH 0x98 +#define FMTSLV 0x9c +#define FMTLNV 0xa0 +#define FMTRLEN 0xa4 +#define FMTHCNT 0xa8 +#define FMT_ADDR_PTR_B 0xac +#define FMT_ADDR_PTR(i) (FMT_ADDR_PTR_B + (i * 4)) +#define FMTPGM_VF0 0xcc +#define FMTPGM_VF1 0xd0 +#define FMTPGM_AP0 0xd4 +#define FMTPGM_AP1 0xd8 +#define FMTPGM_AP2 0xdc +#define FMTPGM_AP3 0xe0 +#define FMTPGM_AP4 0xe4 +#define FMTPGM_AP5 0xe8 +#define FMTPGM_AP6 0xec +#define FMTPGM_AP7 0xf0 +#define LSCCFG1 0xf4 +#define LSCCFG2 0xf8 +#define LSCH0 0xfc +#define LSCV0 0x100 +#define LSCKH 0x104 +#define LSCKV 0x108 +#define LSCMEMCTL 0x10c +#define LSCMEMD 0x110 +#define LSCMEMQ 0x114 +#define DFCCTL 0x118 +#define DFCVSAT 0x11c +#define DFCMEMCTL 0x120 +#define DFCMEM0 0x124 +#define DFCMEM1 0x128 +#define DFCMEM2 0x12c +#define DFCMEM3 0x130 +#define DFCMEM4 0x134 +#define CSCCTL 0x138 +#define CSCM0 0x13c +#define CSCM1 0x140 +#define CSCM2 0x144 +#define CSCM3 0x148 +#define CSCM4 0x14c +#define CSCM5 0x150 +#define CSCM6 0x154 +#define CSCM7 0x158 +#define DATAOFST 0x15c +#define CCDC_REG_LAST DATAOFST +/************************************************************** +* Define for various register bit mask and shifts for CCDC +* +**************************************************************/ +#define CCDC_RAW_IP_MODE 0 +#define CCDC_VDHDOUT_INPUT 0 +#define CCDC_YCINSWP_RAW (0 << 4) +#define CCDC_EXWEN_DISABLE 0 +#define CCDC_DATAPOL_NORMAL 0 +#define CCDC_CCDCFG_FIDMD_LATCH_VSYNC 0 +#define CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC (1 << 6) +#define CCDC_CCDCFG_WENLOG_AND 0 +#define CCDC_CCDCFG_TRGSEL_WEN 0 +#define CCDC_CCDCFG_EXTRG_DISABLE 0 +#define CCDC_CFA_MOSAIC 0 +#define CCDC_Y8POS_SHIFT 11 + +#define CCDC_VDC_DFCVSAT_MASK 0x3fff +#define CCDC_DATAOFST_MASK 0x0ff +#define CCDC_DATAOFST_H_SHIFT 0 +#define CCDC_DATAOFST_V_SHIFT 8 +#define CCDC_GAMMAWD_CFA_MASK 1 +#define CCDC_GAMMAWD_CFA_SHIFT 5 +#define CCDC_GAMMAWD_INPUT_SHIFT 2 +#define CCDC_FID_POL_MASK 1 +#define CCDC_FID_POL_SHIFT 4 +#define CCDC_HD_POL_MASK 1 +#define CCDC_HD_POL_SHIFT 3 +#define CCDC_VD_POL_MASK 1 +#define CCDC_VD_POL_SHIFT 2 +#define CCDC_VD_POL_NEGATIVE (1 << 2) +#define CCDC_FRM_FMT_MASK 1 +#define CCDC_FRM_FMT_SHIFT 7 +#define CCDC_DATA_SZ_MASK 7 +#define CCDC_DATA_SZ_SHIFT 8 +#define CCDC_VDHDOUT_MASK 1 +#define CCDC_VDHDOUT_SHIFT 0 +#define CCDC_EXWEN_MASK 1 +#define CCDC_EXWEN_SHIFT 5 +#define CCDC_INPUT_MODE_MASK 3 +#define CCDC_INPUT_MODE_SHIFT 12 +#define CCDC_PIX_FMT_MASK 3 +#define CCDC_PIX_FMT_SHIFT 12 +#define CCDC_DATAPOL_MASK 1 +#define CCDC_DATAPOL_SHIFT 6 +#define CCDC_WEN_ENABLE (1 << 1) +#define CCDC_VDHDEN_ENABLE (1 << 16) +#define CCDC_LPF_ENABLE (1 << 14) +#define CCDC_ALAW_ENABLE 1 +#define CCDC_ALAW_GAMMA_WD_MASK 7 +#define CCDC_REC656IF_BT656_EN 3 + +#define CCDC_FMTCFG_FMTMODE_MASK 3 +#define CCDC_FMTCFG_FMTMODE_SHIFT 1 +#define CCDC_FMTCFG_LNUM_MASK 3 +#define CCDC_FMTCFG_LNUM_SHIFT 4 +#define CCDC_FMTCFG_ADDRINC_MASK 7 +#define CCDC_FMTCFG_ADDRINC_SHIFT 8 + +#define CCDC_CCDCFG_FIDMD_SHIFT 6 +#define CCDC_CCDCFG_WENLOG_SHIFT 8 +#define CCDC_CCDCFG_TRGSEL_SHIFT 9 +#define CCDC_CCDCFG_EXTRG_SHIFT 10 +#define CCDC_CCDCFG_MSBINVI_SHIFT 13 + +#define CCDC_HSIZE_FLIP_SHIFT 12 +#define CCDC_HSIZE_FLIP_MASK 1 +#define CCDC_HSIZE_VAL_MASK 0xFFF +#define CCDC_SDOFST_FIELD_INTERLEAVED 0x249 +#define CCDC_SDOFST_INTERLACE_INVERSE 0x4B6D +#define CCDC_SDOFST_INTERLACE_NORMAL 0x0B6D +#define CCDC_SDOFST_PROGRESSIVE_INVERSE 0x4000 +#define CCDC_SDOFST_PROGRESSIVE_NORMAL 0 +#define CCDC_START_PX_HOR_MASK 0x7FFF +#define CCDC_NUM_PX_HOR_MASK 0x7FFF +#define CCDC_START_VER_ONE_MASK 0x7FFF +#define CCDC_START_VER_TWO_MASK 0x7FFF +#define CCDC_NUM_LINES_VER 0x7FFF + +#define CCDC_BLK_CLAMP_ENABLE (1 << 15) +#define CCDC_BLK_SGAIN_MASK 0x1F +#define CCDC_BLK_ST_PXL_MASK 0x1FFF +#define CCDC_BLK_SAMPLE_LN_MASK 3 +#define CCDC_BLK_SAMPLE_LN_SHIFT 13 + +#define CCDC_NUM_LINE_CALC_MASK 3 +#define CCDC_NUM_LINE_CALC_SHIFT 14 + +#define CCDC_BLK_DC_SUB_MASK 0x3FFF +#define CCDC_BLK_COMP_MASK 0xFF +#define CCDC_BLK_COMP_GB_COMP_SHIFT 8 +#define CCDC_BLK_COMP_GR_COMP_SHIFT 0 +#define CCDC_BLK_COMP_R_COMP_SHIFT 8 +#define CCDC_LATCH_ON_VSYNC_DISABLE (1 << 15) +#define CCDC_LATCH_ON_VSYNC_ENABLE (0 << 15) +#define CCDC_FPC_ENABLE (1 << 15) +#define CCDC_FPC_FPC_NUM_MASK 0x7FFF +#define CCDC_DATA_PACK_ENABLE (1 << 11) +#define CCDC_FMT_HORZ_FMTLNH_MASK 0x1FFF +#define CCDC_FMT_HORZ_FMTSPH_MASK 0x1FFF +#define CCDC_FMT_HORZ_FMTSPH_SHIFT 16 +#define CCDC_FMT_VERT_FMTLNV_MASK 0x1FFF +#define CCDC_FMT_VERT_FMTSLV_MASK 0x1FFF +#define CCDC_FMT_VERT_FMTSLV_SHIFT 16 +#define CCDC_VP_OUT_VERT_NUM_MASK 0x3FFF +#define CCDC_VP_OUT_VERT_NUM_SHIFT 17 +#define CCDC_VP_OUT_HORZ_NUM_MASK 0x1FFF +#define CCDC_VP_OUT_HORZ_NUM_SHIFT 4 +#define CCDC_VP_OUT_HORZ_ST_MASK 0xF + +#define CCDC_CSC_COEF_INTEG_MASK 7 +#define CCDC_CSC_COEF_DECIMAL_MASK 0x1f +#define CCDC_CSC_COEF_INTEG_SHIFT 5 +#define CCDC_CSCM_MSB_SHIFT 8 +#define CCDC_CSC_ENABLE 1 +#define CCDC_CSC_DEC_MAX 32 + +#define CCDC_MFILT1_SHIFT 10 +#define CCDC_MFILT2_SHIFT 8 +#define CCDC_MED_FILT_THRESH 0x3FFF +#define CCDC_LPF_MASK 1 +#define CCDC_LPF_SHIFT 14 +#define CCDC_OFFSET_MASK 0x3FF +#define CCDC_DATASFT_MASK 7 +#define CCDC_DATASFT_SHIFT 8 + +#define CCDC_DF_ENABLE 1 + +#define CCDC_FMTPLEN_P0_MASK 0xF +#define CCDC_FMTPLEN_P1_MASK 0xF +#define CCDC_FMTPLEN_P2_MASK 7 +#define CCDC_FMTPLEN_P3_MASK 7 +#define CCDC_FMTPLEN_P0_SHIFT 0 +#define CCDC_FMTPLEN_P1_SHIFT 4 +#define CCDC_FMTPLEN_P2_SHIFT 8 +#define CCDC_FMTPLEN_P3_SHIFT 12 + +#define CCDC_FMTSPH_MASK 0x1FFF +#define CCDC_FMTLNH_MASK 0x1FFF +#define CCDC_FMTSLV_MASK 0x1FFF +#define CCDC_FMTLNV_MASK 0x7FFF +#define CCDC_FMTRLEN_MASK 0x1FFF +#define CCDC_FMTHCNT_MASK 0x1FFF + +#define CCDC_ADP_INIT_MASK 0x1FFF +#define CCDC_ADP_LINE_SHIFT 13 +#define CCDC_ADP_LINE_MASK 3 +#define CCDC_FMTPGN_APTR_MASK 7 + +#define CCDC_DFCCTL_GDFCEN_MASK 1 +#define CCDC_DFCCTL_VDFCEN_MASK 1 +#define CCDC_DFCCTL_VDFC_DISABLE (0 << 4) +#define CCDC_DFCCTL_VDFCEN_SHIFT 4 +#define CCDC_DFCCTL_VDFCSL_MASK 3 +#define CCDC_DFCCTL_VDFCSL_SHIFT 5 +#define CCDC_DFCCTL_VDFCUDA_MASK 1 +#define CCDC_DFCCTL_VDFCUDA_SHIFT 7 +#define CCDC_DFCCTL_VDFLSFT_MASK 3 +#define CCDC_DFCCTL_VDFLSFT_SHIFT 8 +#define CCDC_DFCMEMCTL_DFCMARST_MASK 1 +#define CCDC_DFCMEMCTL_DFCMARST_SHIFT 2 +#define CCDC_DFCMEMCTL_DFCMWR_MASK 1 +#define CCDC_DFCMEMCTL_DFCMWR_SHIFT 0 +#define CCDC_DFCMEMCTL_INC_ADDR (0 << 2) + +#define CCDC_LSCCFG_GFTSF_MASK 7 +#define CCDC_LSCCFG_GFTSF_SHIFT 1 +#define CCDC_LSCCFG_GFTINV_MASK 0xf +#define CCDC_LSCCFG_GFTINV_SHIFT 4 +#define CCDC_LSC_GFTABLE_SEL_MASK 3 +#define CCDC_LSC_GFTABLE_EPEL_SHIFT 8 +#define CCDC_LSC_GFTABLE_OPEL_SHIFT 10 +#define CCDC_LSC_GFTABLE_EPOL_SHIFT 12 +#define CCDC_LSC_GFTABLE_OPOL_SHIFT 14 +#define CCDC_LSC_GFMODE_MASK 3 +#define CCDC_LSC_GFMODE_SHIFT 4 +#define CCDC_LSC_DISABLE 0 +#define CCDC_LSC_ENABLE 1 +#define CCDC_LSC_TABLE1_SLC 0 +#define CCDC_LSC_TABLE2_SLC 1 +#define CCDC_LSC_TABLE3_SLC 2 +#define CCDC_LSC_MEMADDR_RESET (1 << 2) +#define CCDC_LSC_MEMADDR_INCR (0 << 2) +#define CCDC_LSC_FRAC_MASK_T1 0xFF +#define CCDC_LSC_INT_MASK 3 +#define CCDC_LSC_FRAC_MASK 0x3FFF +#define CCDC_LSC_CENTRE_MASK 0x3FFF +#define CCDC_LSC_COEF_MASK 0xff +#define CCDC_LSC_COEFL_SHIFT 0 +#define CCDC_LSC_COEFU_SHIFT 8 +#define CCDC_GAIN_MASK 0x7FF +#define CCDC_SYNCEN_VDHDEN_MASK (1 << 0) +#define CCDC_SYNCEN_WEN_MASK (1 << 1) +#define CCDC_SYNCEN_WEN_SHIFT 1 + +/* Power on Defaults in hardware */ +#define MODESET_DEFAULT 0x200 +#define CULH_DEFAULT 0xFFFF +#define CULV_DEFAULT 0xFF +#define GAIN_DEFAULT 256 +#define OUTCLIP_DEFAULT 0x3FFF +#define LSCCFG2_DEFAULT 0xE + +#endif diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c new file mode 100644 index 000000000000..4a93e5ad6415 --- /dev/null +++ b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c @@ -0,0 +1,879 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2006-2009 Texas Instruments Inc + * + * CCDC hardware module for DM6446 + * ------------------------------ + * + * This module is for configuring CCD controller of DM6446 VPFE to capture + * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules + * such as Defect Pixel Correction, Color Space Conversion etc to + * pre-process the Raw Bayer RGB data, before writing it to SDRAM. + * This file is named DM644x so that other variants such DM6443 + * may be supported using the same module. + * + * TODO: Test Raw bayer parameter settings and bayer capture + * Split module parameter structure to module specific ioctl structs + * investigate if enum used for user space type definition + * to be replaced by #defines or integer + */ +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/videodev2.h> +#include <linux/gfp.h> +#include <linux/err.h> +#include <linux/module.h> + +#include "dm644x_ccdc.h" +#include <media/davinci/vpss.h> + +#include "dm644x_ccdc_regs.h" +#include "ccdc_hw_device.h" + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("CCDC Driver for DM6446"); +MODULE_AUTHOR("Texas Instruments"); + +static struct ccdc_oper_config { + struct device *dev; + /* CCDC interface type */ + enum vpfe_hw_if_type if_type; + /* Raw Bayer configuration */ + struct ccdc_params_raw bayer; + /* YCbCr configuration */ + struct ccdc_params_ycbcr ycbcr; + /* ccdc base address */ + void __iomem *base_addr; +} ccdc_cfg = { + /* Raw configurations */ + .bayer = { + .pix_fmt = CCDC_PIXFMT_RAW, + .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, + .win = CCDC_WIN_VGA, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .config_params = { + .data_sz = CCDC_DATA_10BITS, + }, + }, + .ycbcr = { + .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, + .frm_fmt = CCDC_FRMFMT_INTERLACED, + .win = CCDC_WIN_PAL, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .bt656_enable = 1, + .pix_order = CCDC_PIXORDER_CBYCRY, + .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED + }, +}; + +#define CCDC_MAX_RAW_YUV_FORMATS 2 + +/* Raw Bayer formats */ +static u32 ccdc_raw_bayer_pix_formats[] = + {V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; + +/* Raw YUV formats */ +static u32 ccdc_raw_yuv_pix_formats[] = + {V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; + +/* CCDC Save/Restore context */ +static u32 ccdc_ctx[CCDC_REG_END / sizeof(u32)]; + +/* register access routines */ +static inline u32 regr(u32 offset) +{ + return __raw_readl(ccdc_cfg.base_addr + offset); +} + +static inline void regw(u32 val, u32 offset) +{ + __raw_writel(val, ccdc_cfg.base_addr + offset); +} + +static void ccdc_enable(int flag) +{ + regw(flag, CCDC_PCR); +} + +static void ccdc_enable_vport(int flag) +{ + if (flag) + /* enable video port */ + regw(CCDC_ENABLE_VIDEO_PORT, CCDC_FMTCFG); + else + regw(CCDC_DISABLE_VIDEO_PORT, CCDC_FMTCFG); +} + +/* + * ccdc_setwin() + * This function will configure the window size + * to be capture in CCDC reg + */ +static void ccdc_setwin(struct v4l2_rect *image_win, + enum ccdc_frmfmt frm_fmt, + int ppc) +{ + int horz_start, horz_nr_pixels; + int vert_start, vert_nr_lines; + int val = 0, mid_img = 0; + + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin..."); + /* + * ppc - per pixel count. indicates how many pixels per cell + * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. + * raw capture this is 1 + */ + horz_start = image_win->left << (ppc - 1); + horz_nr_pixels = (image_win->width << (ppc - 1)) - 1; + regw((horz_start << CCDC_HORZ_INFO_SPH_SHIFT) | horz_nr_pixels, + CCDC_HORZ_INFO); + + vert_start = image_win->top; + + if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + vert_nr_lines = (image_win->height >> 1) - 1; + vert_start >>= 1; + /* Since first line doesn't have any data */ + vert_start += 1; + /* configure VDINT0 */ + val = (vert_start << CCDC_VDINT_VDINT0_SHIFT); + regw(val, CCDC_VDINT); + + } else { + /* Since first line doesn't have any data */ + vert_start += 1; + vert_nr_lines = image_win->height - 1; + /* + * configure VDINT0 and VDINT1. VDINT1 will be at half + * of image height + */ + mid_img = vert_start + (image_win->height / 2); + val = (vert_start << CCDC_VDINT_VDINT0_SHIFT) | + (mid_img & CCDC_VDINT_VDINT1_MASK); + regw(val, CCDC_VDINT); + + } + regw((vert_start << CCDC_VERT_START_SLV0_SHIFT) | vert_start, + CCDC_VERT_START); + regw(vert_nr_lines, CCDC_VERT_LINES); + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin..."); +} + +static void ccdc_readregs(void) +{ + unsigned int val = 0; + + val = regr(CCDC_ALAW); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to ALAW...\n", val); + val = regr(CCDC_CLAMP); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to CLAMP...\n", val); + val = regr(CCDC_DCSUB); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to DCSUB...\n", val); + val = regr(CCDC_BLKCMP); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to BLKCMP...\n", val); + val = regr(CCDC_FPC_ADDR); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC_ADDR...\n", val); + val = regr(CCDC_FPC); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC...\n", val); + val = regr(CCDC_FMTCFG); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMTCFG...\n", val); + val = regr(CCDC_COLPTN); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to COLPTN...\n", val); + val = regr(CCDC_FMT_HORZ); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_HORZ...\n", val); + val = regr(CCDC_FMT_VERT); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_VERT...\n", val); + val = regr(CCDC_HSIZE_OFF); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HSIZE_OFF...\n", val); + val = regr(CCDC_SDOFST); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SDOFST...\n", val); + val = regr(CCDC_VP_OUT); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VP_OUT...\n", val); + val = regr(CCDC_SYN_MODE); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SYN_MODE...\n", val); + val = regr(CCDC_HORZ_INFO); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HORZ_INFO...\n", val); + val = regr(CCDC_VERT_START); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_START...\n", val); + val = regr(CCDC_VERT_LINES); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_LINES...\n", val); +} + +static int ccdc_close(struct device *dev) +{ + return 0; +} + +/* + * ccdc_restore_defaults() + * This function will write defaults to all CCDC registers + */ +static void ccdc_restore_defaults(void) +{ + int i; + + /* disable CCDC */ + ccdc_enable(0); + /* set all registers to default value */ + for (i = 4; i <= 0x94; i += 4) + regw(0, i); + regw(CCDC_NO_CULLING, CCDC_CULLING); + regw(CCDC_GAMMA_BITS_11_2, CCDC_ALAW); +} + +static int ccdc_open(struct device *device) +{ + ccdc_restore_defaults(); + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_enable_vport(1); + return 0; +} + +static void ccdc_sbl_reset(void) +{ + vpss_clear_wbl_overflow(VPSS_PCR_CCDC_WBL_O); +} + +/* + * ccdc_config_ycbcr() + * This function will configure CCDC for YCbCr video capture + */ +static void ccdc_config_ycbcr(void) +{ + struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr; + u32 syn_mode; + + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr..."); + /* + * first restore the CCDC registers to default values + * This is important since we assume default values to be set in + * a lot of registers that we didn't touch + */ + ccdc_restore_defaults(); + + /* + * configure pixel format, frame format, configure video frame + * format, enable output to SDRAM, enable internal timing generator + * and 8bit pack mode + */ + syn_mode = (((params->pix_fmt & CCDC_SYN_MODE_INPMOD_MASK) << + CCDC_SYN_MODE_INPMOD_SHIFT) | + ((params->frm_fmt & CCDC_SYN_FLDMODE_MASK) << + CCDC_SYN_FLDMODE_SHIFT) | CCDC_VDHDEN_ENABLE | + CCDC_WEN_ENABLE | CCDC_DATA_PACK_ENABLE); + + /* setup BT.656 sync mode */ + if (params->bt656_enable) { + regw(CCDC_REC656IF_BT656_EN, CCDC_REC656IF); + + /* + * configure the FID, VD, HD pin polarity, + * fld,hd pol positive, vd negative, 8-bit data + */ + syn_mode |= CCDC_SYN_MODE_VD_POL_NEGATIVE; + if (ccdc_cfg.if_type == VPFE_BT656_10BIT) + syn_mode |= CCDC_SYN_MODE_10BITS; + else + syn_mode |= CCDC_SYN_MODE_8BITS; + } else { + /* y/c external sync mode */ + syn_mode |= (((params->fid_pol & CCDC_FID_POL_MASK) << + CCDC_FID_POL_SHIFT) | + ((params->hd_pol & CCDC_HD_POL_MASK) << + CCDC_HD_POL_SHIFT) | + ((params->vd_pol & CCDC_VD_POL_MASK) << + CCDC_VD_POL_SHIFT)); + } + regw(syn_mode, CCDC_SYN_MODE); + + /* configure video window */ + ccdc_setwin(¶ms->win, params->frm_fmt, 2); + + /* + * configure the order of y cb cr in SDRAM, and disable latch + * internal register on vsync + */ + if (ccdc_cfg.if_type == VPFE_BT656_10BIT) + regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) | + CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_BW656_10BIT, + CCDC_CCDCFG); + else + regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) | + CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG); + + /* + * configure the horizontal line offset. This should be a + * on 32 byte boundary. So clear LSB 5 bits + */ + regw(((params->win.width * 2 + 31) & ~0x1f), CCDC_HSIZE_OFF); + + /* configure the memory line offset */ + if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) + /* two fields are interleaved in memory */ + regw(CCDC_SDOFST_FIELD_INTERLEAVED, CCDC_SDOFST); + + ccdc_sbl_reset(); + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n"); +} + +static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp) +{ + u32 val; + + if (!bclamp->enable) { + /* configure DCSub */ + val = (bclamp->dc_sub) & CCDC_BLK_DC_SUB_MASK; + regw(val, CCDC_DCSUB); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to DCSUB...\n", val); + regw(CCDC_CLAMP_DEFAULT_VAL, CCDC_CLAMP); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to CLAMP...\n"); + return; + } + /* + * Configure gain, Start pixel, No of line to be avg, + * No of pixel/line to be avg, & Enable the Black clamping + */ + val = ((bclamp->sgain & CCDC_BLK_SGAIN_MASK) | + ((bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) << + CCDC_BLK_ST_PXL_SHIFT) | + ((bclamp->sample_ln & CCDC_BLK_SAMPLE_LINE_MASK) << + CCDC_BLK_SAMPLE_LINE_SHIFT) | + ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) << + CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE); + regw(val, CCDC_CLAMP); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to CLAMP...\n", val); + /* If Black clamping is enable then make dcsub 0 */ + regw(CCDC_DCSUB_DEFAULT_VAL, CCDC_DCSUB); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x00000000 to DCSUB...\n"); +} + +static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp) +{ + u32 val; + + val = ((bcomp->b & CCDC_BLK_COMP_MASK) | + ((bcomp->gb & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GB_COMP_SHIFT) | + ((bcomp->gr & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GR_COMP_SHIFT) | + ((bcomp->r & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_R_COMP_SHIFT)); + regw(val, CCDC_BLKCMP); +} + +/* + * ccdc_config_raw() + * This function will configure CCDC for Raw capture mode + */ +static void ccdc_config_raw(void) +{ + struct ccdc_params_raw *params = &ccdc_cfg.bayer; + struct ccdc_config_params_raw *config_params = + &ccdc_cfg.bayer.config_params; + unsigned int syn_mode = 0; + unsigned int val; + + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw..."); + + /* Reset CCDC */ + ccdc_restore_defaults(); + + /* Disable latching function registers on VSYNC */ + regw(CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG); + + /* + * Configure the vertical sync polarity(SYN_MODE.VDPOL), + * horizontal sync polarity (SYN_MODE.HDPOL), frame id polarity + * (SYN_MODE.FLDPOL), frame format(progressive or interlace), + * data size(SYNMODE.DATSIZ), &pixel format (Input mode), output + * SDRAM, enable internal timing generator + */ + syn_mode = + (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) | + ((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) | + ((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) | + ((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) | + ((config_params->data_sz & CCDC_DATA_SZ_MASK) << + CCDC_DATA_SZ_SHIFT) | + ((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT) | + CCDC_WEN_ENABLE | CCDC_VDHDEN_ENABLE); + + /* Enable and configure aLaw register if needed */ + if (config_params->alaw.enable) { + val = ((config_params->alaw.gamma_wd & + CCDC_ALAW_GAMMA_WD_MASK) | CCDC_ALAW_ENABLE); + regw(val, CCDC_ALAW); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to ALAW...\n", val); + } + + /* Configure video window */ + ccdc_setwin(¶ms->win, params->frm_fmt, CCDC_PPC_RAW); + + /* Configure Black Clamp */ + ccdc_config_black_clamp(&config_params->blk_clamp); + + /* Configure Black level compensation */ + ccdc_config_black_compense(&config_params->blk_comp); + + /* If data size is 8 bit then pack the data */ + if ((config_params->data_sz == CCDC_DATA_8BITS) || + config_params->alaw.enable) + syn_mode |= CCDC_DATA_PACK_ENABLE; + + /* disable video port */ + val = CCDC_DISABLE_VIDEO_PORT; + + if (config_params->data_sz == CCDC_DATA_8BITS) + val |= (CCDC_DATA_10BITS & CCDC_FMTCFG_VPIN_MASK) + << CCDC_FMTCFG_VPIN_SHIFT; + else + val |= (config_params->data_sz & CCDC_FMTCFG_VPIN_MASK) + << CCDC_FMTCFG_VPIN_SHIFT; + /* Write value in FMTCFG */ + regw(val, CCDC_FMTCFG); + + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMTCFG...\n", val); + /* Configure the color pattern according to mt9t001 sensor */ + regw(CCDC_COLPTN_VAL, CCDC_COLPTN); + + dev_dbg(ccdc_cfg.dev, "\nWriting 0xBB11BB11 to COLPTN...\n"); + /* + * Configure Data formatter(Video port) pixel selection + * (FMT_HORZ, FMT_VERT) + */ + val = ((params->win.left & CCDC_FMT_HORZ_FMTSPH_MASK) << + CCDC_FMT_HORZ_FMTSPH_SHIFT) | + (params->win.width & CCDC_FMT_HORZ_FMTLNH_MASK); + regw(val, CCDC_FMT_HORZ); + + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_HORZ...\n", val); + val = (params->win.top & CCDC_FMT_VERT_FMTSLV_MASK) + << CCDC_FMT_VERT_FMTSLV_SHIFT; + if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) + val |= (params->win.height) & CCDC_FMT_VERT_FMTLNV_MASK; + else + val |= (params->win.height >> 1) & CCDC_FMT_VERT_FMTLNV_MASK; + + dev_dbg(ccdc_cfg.dev, "\nparams->win.height 0x%x ...\n", + params->win.height); + regw(val, CCDC_FMT_VERT); + + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_VERT...\n", val); + + dev_dbg(ccdc_cfg.dev, "\nbelow regw(val, FMT_VERT)..."); + + /* + * Configure Horizontal offset register. If pack 8 is enabled then + * 1 pixel will take 1 byte + */ + if ((config_params->data_sz == CCDC_DATA_8BITS) || + config_params->alaw.enable) + regw((params->win.width + CCDC_32BYTE_ALIGN_VAL) & + CCDC_HSIZE_OFF_MASK, CCDC_HSIZE_OFF); + else + /* else one pixel will take 2 byte */ + regw(((params->win.width * CCDC_TWO_BYTES_PER_PIXEL) + + CCDC_32BYTE_ALIGN_VAL) & CCDC_HSIZE_OFF_MASK, + CCDC_HSIZE_OFF); + + /* Set value for SDOFST */ + if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { + if (params->image_invert_enable) { + /* For intelace inverse mode */ + regw(CCDC_INTERLACED_IMAGE_INVERT, CCDC_SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x4B6D to SDOFST..\n"); + } + + else { + /* For intelace non inverse mode */ + regw(CCDC_INTERLACED_NO_IMAGE_INVERT, CCDC_SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x0249 to SDOFST..\n"); + } + } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { + regw(CCDC_PROGRESSIVE_NO_IMAGE_INVERT, CCDC_SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to SDOFST...\n"); + } + + /* + * Configure video port pixel selection (VPOUT) + * Here -1 is to make the height value less than FMT_VERT.FMTLNV + */ + if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) + val = (((params->win.height - 1) & CCDC_VP_OUT_VERT_NUM_MASK)) + << CCDC_VP_OUT_VERT_NUM_SHIFT; + else + val = + ((((params->win.height >> CCDC_INTERLACED_HEIGHT_SHIFT) - + 1) & CCDC_VP_OUT_VERT_NUM_MASK)) << + CCDC_VP_OUT_VERT_NUM_SHIFT; + + val |= ((((params->win.width))) & CCDC_VP_OUT_HORZ_NUM_MASK) + << CCDC_VP_OUT_HORZ_NUM_SHIFT; + val |= (params->win.left) & CCDC_VP_OUT_HORZ_ST_MASK; + regw(val, CCDC_VP_OUT); + + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to VP_OUT...\n", val); + regw(syn_mode, CCDC_SYN_MODE); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to SYN_MODE...\n", syn_mode); + + ccdc_sbl_reset(); + dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw..."); + ccdc_readregs(); +} + +static int ccdc_configure(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_config_raw(); + else + ccdc_config_ycbcr(); + return 0; +} + +static int ccdc_set_buftype(enum ccdc_buftype buf_type) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.buf_type = buf_type; + else + ccdc_cfg.ycbcr.buf_type = buf_type; + return 0; +} + +static enum ccdc_buftype ccdc_get_buftype(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc_cfg.bayer.buf_type; + return ccdc_cfg.ycbcr.buf_type; +} + +static int ccdc_enum_pix(u32 *pix, int i) +{ + int ret = -EINVAL; + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) { + *pix = ccdc_raw_bayer_pix_formats[i]; + ret = 0; + } + } else { + if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) { + *pix = ccdc_raw_yuv_pix_formats[i]; + ret = 0; + } + } + return ret; +} + +static int ccdc_set_pixel_format(u32 pixfmt) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; + if (pixfmt == V4L2_PIX_FMT_SBGGR8) + ccdc_cfg.bayer.config_params.alaw.enable = 1; + else if (pixfmt != V4L2_PIX_FMT_SBGGR16) + return -EINVAL; + } else { + if (pixfmt == V4L2_PIX_FMT_YUYV) + ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; + else if (pixfmt == V4L2_PIX_FMT_UYVY) + ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + else + return -EINVAL; + } + return 0; +} + +static u32 ccdc_get_pixel_format(void) +{ + struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw; + u32 pixfmt; + + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + if (alaw->enable) + pixfmt = V4L2_PIX_FMT_SBGGR8; + else + pixfmt = V4L2_PIX_FMT_SBGGR16; + else { + if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) + pixfmt = V4L2_PIX_FMT_YUYV; + else + pixfmt = V4L2_PIX_FMT_UYVY; + } + return pixfmt; +} + +static int ccdc_set_image_window(struct v4l2_rect *win) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.win = *win; + else + ccdc_cfg.ycbcr.win = *win; + return 0; +} + +static void ccdc_get_image_window(struct v4l2_rect *win) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + *win = ccdc_cfg.bayer.win; + else + *win = ccdc_cfg.ycbcr.win; +} + +static unsigned int ccdc_get_line_length(void) +{ + struct ccdc_config_params_raw *config_params = + &ccdc_cfg.bayer.config_params; + unsigned int len; + + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + if ((config_params->alaw.enable) || + (config_params->data_sz == CCDC_DATA_8BITS)) + len = ccdc_cfg.bayer.win.width; + else + len = ccdc_cfg.bayer.win.width * 2; + } else + len = ccdc_cfg.ycbcr.win.width * 2; + return ALIGN(len, 32); +} + +static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.frm_fmt = frm_fmt; + else + ccdc_cfg.ycbcr.frm_fmt = frm_fmt; + return 0; +} + +static enum ccdc_frmfmt ccdc_get_frame_format(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc_cfg.bayer.frm_fmt; + else + return ccdc_cfg.ycbcr.frm_fmt; +} + +static int ccdc_getfid(void) +{ + return (regr(CCDC_SYN_MODE) >> 15) & 1; +} + +/* misc operations */ +static inline void ccdc_setfbaddr(unsigned long addr) +{ + regw(addr & 0xffffffe0, CCDC_SDR_ADDR); +} + +static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params) +{ + ccdc_cfg.if_type = params->if_type; + + switch (params->if_type) { + case VPFE_BT656: + case VPFE_YCBCR_SYNC_16: + case VPFE_YCBCR_SYNC_8: + case VPFE_BT656_10BIT: + ccdc_cfg.ycbcr.vd_pol = params->vdpol; + ccdc_cfg.ycbcr.hd_pol = params->hdpol; + break; + default: + /* TODO add support for raw bayer here */ + return -EINVAL; + } + return 0; +} + +static void ccdc_save_context(void) +{ + ccdc_ctx[CCDC_PCR >> 2] = regr(CCDC_PCR); + ccdc_ctx[CCDC_SYN_MODE >> 2] = regr(CCDC_SYN_MODE); + ccdc_ctx[CCDC_HD_VD_WID >> 2] = regr(CCDC_HD_VD_WID); + ccdc_ctx[CCDC_PIX_LINES >> 2] = regr(CCDC_PIX_LINES); + ccdc_ctx[CCDC_HORZ_INFO >> 2] = regr(CCDC_HORZ_INFO); + ccdc_ctx[CCDC_VERT_START >> 2] = regr(CCDC_VERT_START); + ccdc_ctx[CCDC_VERT_LINES >> 2] = regr(CCDC_VERT_LINES); + ccdc_ctx[CCDC_CULLING >> 2] = regr(CCDC_CULLING); + ccdc_ctx[CCDC_HSIZE_OFF >> 2] = regr(CCDC_HSIZE_OFF); + ccdc_ctx[CCDC_SDOFST >> 2] = regr(CCDC_SDOFST); + ccdc_ctx[CCDC_SDR_ADDR >> 2] = regr(CCDC_SDR_ADDR); + ccdc_ctx[CCDC_CLAMP >> 2] = regr(CCDC_CLAMP); + ccdc_ctx[CCDC_DCSUB >> 2] = regr(CCDC_DCSUB); + ccdc_ctx[CCDC_COLPTN >> 2] = regr(CCDC_COLPTN); + ccdc_ctx[CCDC_BLKCMP >> 2] = regr(CCDC_BLKCMP); + ccdc_ctx[CCDC_FPC >> 2] = regr(CCDC_FPC); + ccdc_ctx[CCDC_FPC_ADDR >> 2] = regr(CCDC_FPC_ADDR); + ccdc_ctx[CCDC_VDINT >> 2] = regr(CCDC_VDINT); + ccdc_ctx[CCDC_ALAW >> 2] = regr(CCDC_ALAW); + ccdc_ctx[CCDC_REC656IF >> 2] = regr(CCDC_REC656IF); + ccdc_ctx[CCDC_CCDCFG >> 2] = regr(CCDC_CCDCFG); + ccdc_ctx[CCDC_FMTCFG >> 2] = regr(CCDC_FMTCFG); + ccdc_ctx[CCDC_FMT_HORZ >> 2] = regr(CCDC_FMT_HORZ); + ccdc_ctx[CCDC_FMT_VERT >> 2] = regr(CCDC_FMT_VERT); + ccdc_ctx[CCDC_FMT_ADDR0 >> 2] = regr(CCDC_FMT_ADDR0); + ccdc_ctx[CCDC_FMT_ADDR1 >> 2] = regr(CCDC_FMT_ADDR1); + ccdc_ctx[CCDC_FMT_ADDR2 >> 2] = regr(CCDC_FMT_ADDR2); + ccdc_ctx[CCDC_FMT_ADDR3 >> 2] = regr(CCDC_FMT_ADDR3); + ccdc_ctx[CCDC_FMT_ADDR4 >> 2] = regr(CCDC_FMT_ADDR4); + ccdc_ctx[CCDC_FMT_ADDR5 >> 2] = regr(CCDC_FMT_ADDR5); + ccdc_ctx[CCDC_FMT_ADDR6 >> 2] = regr(CCDC_FMT_ADDR6); + ccdc_ctx[CCDC_FMT_ADDR7 >> 2] = regr(CCDC_FMT_ADDR7); + ccdc_ctx[CCDC_PRGEVEN_0 >> 2] = regr(CCDC_PRGEVEN_0); + ccdc_ctx[CCDC_PRGEVEN_1 >> 2] = regr(CCDC_PRGEVEN_1); + ccdc_ctx[CCDC_PRGODD_0 >> 2] = regr(CCDC_PRGODD_0); + ccdc_ctx[CCDC_PRGODD_1 >> 2] = regr(CCDC_PRGODD_1); + ccdc_ctx[CCDC_VP_OUT >> 2] = regr(CCDC_VP_OUT); +} + +static void ccdc_restore_context(void) +{ + regw(ccdc_ctx[CCDC_SYN_MODE >> 2], CCDC_SYN_MODE); + regw(ccdc_ctx[CCDC_HD_VD_WID >> 2], CCDC_HD_VD_WID); + regw(ccdc_ctx[CCDC_PIX_LINES >> 2], CCDC_PIX_LINES); + regw(ccdc_ctx[CCDC_HORZ_INFO >> 2], CCDC_HORZ_INFO); + regw(ccdc_ctx[CCDC_VERT_START >> 2], CCDC_VERT_START); + regw(ccdc_ctx[CCDC_VERT_LINES >> 2], CCDC_VERT_LINES); + regw(ccdc_ctx[CCDC_CULLING >> 2], CCDC_CULLING); + regw(ccdc_ctx[CCDC_HSIZE_OFF >> 2], CCDC_HSIZE_OFF); + regw(ccdc_ctx[CCDC_SDOFST >> 2], CCDC_SDOFST); + regw(ccdc_ctx[CCDC_SDR_ADDR >> 2], CCDC_SDR_ADDR); + regw(ccdc_ctx[CCDC_CLAMP >> 2], CCDC_CLAMP); + regw(ccdc_ctx[CCDC_DCSUB >> 2], CCDC_DCSUB); + regw(ccdc_ctx[CCDC_COLPTN >> 2], CCDC_COLPTN); + regw(ccdc_ctx[CCDC_BLKCMP >> 2], CCDC_BLKCMP); + regw(ccdc_ctx[CCDC_FPC >> 2], CCDC_FPC); + regw(ccdc_ctx[CCDC_FPC_ADDR >> 2], CCDC_FPC_ADDR); + regw(ccdc_ctx[CCDC_VDINT >> 2], CCDC_VDINT); + regw(ccdc_ctx[CCDC_ALAW >> 2], CCDC_ALAW); + regw(ccdc_ctx[CCDC_REC656IF >> 2], CCDC_REC656IF); + regw(ccdc_ctx[CCDC_CCDCFG >> 2], CCDC_CCDCFG); + regw(ccdc_ctx[CCDC_FMTCFG >> 2], CCDC_FMTCFG); + regw(ccdc_ctx[CCDC_FMT_HORZ >> 2], CCDC_FMT_HORZ); + regw(ccdc_ctx[CCDC_FMT_VERT >> 2], CCDC_FMT_VERT); + regw(ccdc_ctx[CCDC_FMT_ADDR0 >> 2], CCDC_FMT_ADDR0); + regw(ccdc_ctx[CCDC_FMT_ADDR1 >> 2], CCDC_FMT_ADDR1); + regw(ccdc_ctx[CCDC_FMT_ADDR2 >> 2], CCDC_FMT_ADDR2); + regw(ccdc_ctx[CCDC_FMT_ADDR3 >> 2], CCDC_FMT_ADDR3); + regw(ccdc_ctx[CCDC_FMT_ADDR4 >> 2], CCDC_FMT_ADDR4); + regw(ccdc_ctx[CCDC_FMT_ADDR5 >> 2], CCDC_FMT_ADDR5); + regw(ccdc_ctx[CCDC_FMT_ADDR6 >> 2], CCDC_FMT_ADDR6); + regw(ccdc_ctx[CCDC_FMT_ADDR7 >> 2], CCDC_FMT_ADDR7); + regw(ccdc_ctx[CCDC_PRGEVEN_0 >> 2], CCDC_PRGEVEN_0); + regw(ccdc_ctx[CCDC_PRGEVEN_1 >> 2], CCDC_PRGEVEN_1); + regw(ccdc_ctx[CCDC_PRGODD_0 >> 2], CCDC_PRGODD_0); + regw(ccdc_ctx[CCDC_PRGODD_1 >> 2], CCDC_PRGODD_1); + regw(ccdc_ctx[CCDC_VP_OUT >> 2], CCDC_VP_OUT); + regw(ccdc_ctx[CCDC_PCR >> 2], CCDC_PCR); +} +static const struct ccdc_hw_device ccdc_hw_dev = { + .name = "DM6446 CCDC", + .owner = THIS_MODULE, + .hw_ops = { + .open = ccdc_open, + .close = ccdc_close, + .reset = ccdc_sbl_reset, + .enable = ccdc_enable, + .set_hw_if_params = ccdc_set_hw_if_params, + .configure = ccdc_configure, + .set_buftype = ccdc_set_buftype, + .get_buftype = ccdc_get_buftype, + .enum_pix = ccdc_enum_pix, + .set_pixel_format = ccdc_set_pixel_format, + .get_pixel_format = ccdc_get_pixel_format, + .set_frame_format = ccdc_set_frame_format, + .get_frame_format = ccdc_get_frame_format, + .set_image_window = ccdc_set_image_window, + .get_image_window = ccdc_get_image_window, + .get_line_length = ccdc_get_line_length, + .setfbaddr = ccdc_setfbaddr, + .getfid = ccdc_getfid, + }, +}; + +static int dm644x_ccdc_probe(struct platform_device *pdev) +{ + struct resource *res; + int status = 0; + + /* + * first try to register with vpfe. If not correct platform, then we + * don't have to iomap + */ + status = vpfe_register_ccdc_device(&ccdc_hw_dev); + if (status < 0) + return status; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + status = -ENODEV; + goto fail_nores; + } + + res = request_mem_region(res->start, resource_size(res), res->name); + if (!res) { + status = -EBUSY; + goto fail_nores; + } + + ccdc_cfg.base_addr = ioremap(res->start, resource_size(res)); + if (!ccdc_cfg.base_addr) { + status = -ENOMEM; + goto fail_nomem; + } + + ccdc_cfg.dev = &pdev->dev; + printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name); + return 0; +fail_nomem: + release_mem_region(res->start, resource_size(res)); +fail_nores: + vpfe_unregister_ccdc_device(&ccdc_hw_dev); + return status; +} + +static int dm644x_ccdc_remove(struct platform_device *pdev) +{ + struct resource *res; + + iounmap(ccdc_cfg.base_addr); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + vpfe_unregister_ccdc_device(&ccdc_hw_dev); + return 0; +} + +static int dm644x_ccdc_suspend(struct device *dev) +{ + /* Save CCDC context */ + ccdc_save_context(); + /* Disable CCDC */ + ccdc_enable(0); + + return 0; +} + +static int dm644x_ccdc_resume(struct device *dev) +{ + /* Restore CCDC context */ + ccdc_restore_context(); + + return 0; +} + +static const struct dev_pm_ops dm644x_ccdc_pm_ops = { + .suspend = dm644x_ccdc_suspend, + .resume = dm644x_ccdc_resume, +}; + +static struct platform_driver dm644x_ccdc_driver = { + .driver = { + .name = "dm644x_ccdc", + .pm = &dm644x_ccdc_pm_ops, + }, + .remove = dm644x_ccdc_remove, + .probe = dm644x_ccdc_probe, +}; + +module_platform_driver(dm644x_ccdc_driver); diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h new file mode 100644 index 000000000000..c20dba3d76d6 --- /dev/null +++ b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h @@ -0,0 +1,171 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2006-2009 Texas Instruments Inc + */ +#ifndef _DM644X_CCDC_H +#define _DM644X_CCDC_H +#include <media/davinci/ccdc_types.h> +#include <media/davinci/vpfe_types.h> + +/* enum for No of pixel per line to be avg. in Black Clamping*/ +enum ccdc_sample_length { + CCDC_SAMPLE_1PIXELS, + CCDC_SAMPLE_2PIXELS, + CCDC_SAMPLE_4PIXELS, + CCDC_SAMPLE_8PIXELS, + CCDC_SAMPLE_16PIXELS +}; + +/* enum for No of lines in Black Clamping */ +enum ccdc_sample_line { + CCDC_SAMPLE_1LINES, + CCDC_SAMPLE_2LINES, + CCDC_SAMPLE_4LINES, + CCDC_SAMPLE_8LINES, + CCDC_SAMPLE_16LINES +}; + +/* enum for Alaw gamma width */ +enum ccdc_gamma_width { + CCDC_GAMMA_BITS_15_6, /* use bits 15-6 for gamma */ + CCDC_GAMMA_BITS_14_5, + CCDC_GAMMA_BITS_13_4, + CCDC_GAMMA_BITS_12_3, + CCDC_GAMMA_BITS_11_2, + CCDC_GAMMA_BITS_10_1, + CCDC_GAMMA_BITS_09_0 /* use bits 9-0 for gamma */ +}; + +/* returns the highest bit used for the gamma */ +static inline u8 ccdc_gamma_width_max_bit(enum ccdc_gamma_width width) +{ + return 15 - width; +} + +enum ccdc_data_size { + CCDC_DATA_16BITS, + CCDC_DATA_15BITS, + CCDC_DATA_14BITS, + CCDC_DATA_13BITS, + CCDC_DATA_12BITS, + CCDC_DATA_11BITS, + CCDC_DATA_10BITS, + CCDC_DATA_8BITS +}; + +/* returns the highest bit used for this data size */ +static inline u8 ccdc_data_size_max_bit(enum ccdc_data_size sz) +{ + return sz == CCDC_DATA_8BITS ? 7 : 15 - sz; +} + +/* structure for ALaw */ +struct ccdc_a_law { + /* Enable/disable A-Law */ + unsigned char enable; + /* Gamma Width Input */ + enum ccdc_gamma_width gamma_wd; +}; + +/* structure for Black Clamping */ +struct ccdc_black_clamp { + unsigned char enable; + /* only if bClampEnable is TRUE */ + enum ccdc_sample_length sample_pixel; + /* only if bClampEnable is TRUE */ + enum ccdc_sample_line sample_ln; + /* only if bClampEnable is TRUE */ + unsigned short start_pixel; + /* only if bClampEnable is TRUE */ + unsigned short sgain; + /* only if bClampEnable is FALSE */ + unsigned short dc_sub; +}; + +/* structure for Black Level Compensation */ +struct ccdc_black_compensation { + /* Constant value to subtract from Red component */ + char r; + /* Constant value to subtract from Gr component */ + char gr; + /* Constant value to subtract from Blue component */ + char b; + /* Constant value to subtract from Gb component */ + char gb; +}; + +/* Structure for CCDC configuration parameters for raw capture mode passed + * by application + */ +struct ccdc_config_params_raw { + /* data size value from 8 to 16 bits */ + enum ccdc_data_size data_sz; + /* Structure for Optional A-Law */ + struct ccdc_a_law alaw; + /* Structure for Optical Black Clamp */ + struct ccdc_black_clamp blk_clamp; + /* Structure for Black Compensation */ + struct ccdc_black_compensation blk_comp; +}; + + +#ifdef __KERNEL__ +#include <linux/io.h> +/* Define to enable/disable video port */ +#define FP_NUM_BYTES 4 +/* Define for extra pixel/line and extra lines/frame */ +#define NUM_EXTRAPIXELS 8 +#define NUM_EXTRALINES 8 + +/* settings for commonly used video formats */ +#define CCDC_WIN_PAL {0, 0, 720, 576} +/* ntsc square pixel */ +#define CCDC_WIN_VGA {0, 0, (640 + NUM_EXTRAPIXELS), (480 + NUM_EXTRALINES)} + +/* Structure for CCDC configuration parameters for raw capture mode */ +struct ccdc_params_raw { + /* pixel format */ + enum ccdc_pixfmt pix_fmt; + /* progressive or interlaced frame */ + enum ccdc_frmfmt frm_fmt; + /* video window */ + struct v4l2_rect win; + /* field id polarity */ + enum vpfe_pin_pol fid_pol; + /* vertical sync polarity */ + enum vpfe_pin_pol vd_pol; + /* horizontal sync polarity */ + enum vpfe_pin_pol hd_pol; + /* interleaved or separated fields */ + enum ccdc_buftype buf_type; + /* + * enable to store the image in inverse + * order in memory(bottom to top) + */ + unsigned char image_invert_enable; + /* configurable parameters */ + struct ccdc_config_params_raw config_params; +}; + +struct ccdc_params_ycbcr { + /* pixel format */ + enum ccdc_pixfmt pix_fmt; + /* progressive or interlaced frame */ + enum ccdc_frmfmt frm_fmt; + /* video window */ + struct v4l2_rect win; + /* field id polarity */ + enum vpfe_pin_pol fid_pol; + /* vertical sync polarity */ + enum vpfe_pin_pol vd_pol; + /* horizontal sync polarity */ + enum vpfe_pin_pol hd_pol; + /* enable BT.656 embedded sync mode */ + int bt656_enable; + /* cb:y:cr:y or y:cb:y:cr in memory */ + enum ccdc_pixorder pix_order; + /* interleaved or separated fields */ + enum ccdc_buftype buf_type; +}; +#endif +#endif /* _DM644X_CCDC_H */ diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h new file mode 100644 index 000000000000..c4894f6a254e --- /dev/null +++ b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h @@ -0,0 +1,140 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2006-2009 Texas Instruments Inc + */ +#ifndef _DM644X_CCDC_REGS_H +#define _DM644X_CCDC_REGS_H + +/**************************************************************************\ +* Register OFFSET Definitions +\**************************************************************************/ +#define CCDC_PID 0x0 +#define CCDC_PCR 0x4 +#define CCDC_SYN_MODE 0x8 +#define CCDC_HD_VD_WID 0xc +#define CCDC_PIX_LINES 0x10 +#define CCDC_HORZ_INFO 0x14 +#define CCDC_VERT_START 0x18 +#define CCDC_VERT_LINES 0x1c +#define CCDC_CULLING 0x20 +#define CCDC_HSIZE_OFF 0x24 +#define CCDC_SDOFST 0x28 +#define CCDC_SDR_ADDR 0x2c +#define CCDC_CLAMP 0x30 +#define CCDC_DCSUB 0x34 +#define CCDC_COLPTN 0x38 +#define CCDC_BLKCMP 0x3c +#define CCDC_FPC 0x40 +#define CCDC_FPC_ADDR 0x44 +#define CCDC_VDINT 0x48 +#define CCDC_ALAW 0x4c +#define CCDC_REC656IF 0x50 +#define CCDC_CCDCFG 0x54 +#define CCDC_FMTCFG 0x58 +#define CCDC_FMT_HORZ 0x5c +#define CCDC_FMT_VERT 0x60 +#define CCDC_FMT_ADDR0 0x64 +#define CCDC_FMT_ADDR1 0x68 +#define CCDC_FMT_ADDR2 0x6c +#define CCDC_FMT_ADDR3 0x70 +#define CCDC_FMT_ADDR4 0x74 +#define CCDC_FMT_ADDR5 0x78 +#define CCDC_FMT_ADDR6 0x7c +#define CCDC_FMT_ADDR7 0x80 +#define CCDC_PRGEVEN_0 0x84 +#define CCDC_PRGEVEN_1 0x88 +#define CCDC_PRGODD_0 0x8c +#define CCDC_PRGODD_1 0x90 +#define CCDC_VP_OUT 0x94 +#define CCDC_REG_END 0x98 + +/*************************************************************** +* Define for various register bit mask and shifts for CCDC +****************************************************************/ +#define CCDC_FID_POL_MASK 1 +#define CCDC_FID_POL_SHIFT 4 +#define CCDC_HD_POL_MASK 1 +#define CCDC_HD_POL_SHIFT 3 +#define CCDC_VD_POL_MASK 1 +#define CCDC_VD_POL_SHIFT 2 +#define CCDC_HSIZE_OFF_MASK 0xffffffe0 +#define CCDC_32BYTE_ALIGN_VAL 31 +#define CCDC_FRM_FMT_MASK 0x1 +#define CCDC_FRM_FMT_SHIFT 7 +#define CCDC_DATA_SZ_MASK 7 +#define CCDC_DATA_SZ_SHIFT 8 +#define CCDC_PIX_FMT_MASK 3 +#define CCDC_PIX_FMT_SHIFT 12 +#define CCDC_VP2SDR_DISABLE 0xFFFBFFFF +#define CCDC_WEN_ENABLE BIT(17) +#define CCDC_SDR2RSZ_DISABLE 0xFFF7FFFF +#define CCDC_VDHDEN_ENABLE BIT(16) +#define CCDC_LPF_ENABLE BIT(14) +#define CCDC_ALAW_ENABLE BIT(3) +#define CCDC_ALAW_GAMMA_WD_MASK 7 +#define CCDC_BLK_CLAMP_ENABLE BIT(31) +#define CCDC_BLK_SGAIN_MASK 0x1F +#define CCDC_BLK_ST_PXL_MASK 0x7FFF +#define CCDC_BLK_ST_PXL_SHIFT 10 +#define CCDC_BLK_SAMPLE_LN_MASK 7 +#define CCDC_BLK_SAMPLE_LN_SHIFT 28 +#define CCDC_BLK_SAMPLE_LINE_MASK 7 +#define CCDC_BLK_SAMPLE_LINE_SHIFT 25 +#define CCDC_BLK_DC_SUB_MASK 0x03FFF +#define CCDC_BLK_COMP_MASK 0xFF +#define CCDC_BLK_COMP_GB_COMP_SHIFT 8 +#define CCDC_BLK_COMP_GR_COMP_SHIFT 16 +#define CCDC_BLK_COMP_R_COMP_SHIFT 24 +#define CCDC_LATCH_ON_VSYNC_DISABLE BIT(15) +#define CCDC_FPC_ENABLE BIT(15) +#define CCDC_FPC_DISABLE 0 +#define CCDC_FPC_FPC_NUM_MASK 0x7FFF +#define CCDC_DATA_PACK_ENABLE BIT(11) +#define CCDC_FMTCFG_VPIN_MASK 7 +#define CCDC_FMTCFG_VPIN_SHIFT 12 +#define CCDC_FMT_HORZ_FMTLNH_MASK 0x1FFF +#define CCDC_FMT_HORZ_FMTSPH_MASK 0x1FFF +#define CCDC_FMT_HORZ_FMTSPH_SHIFT 16 +#define CCDC_FMT_VERT_FMTLNV_MASK 0x1FFF +#define CCDC_FMT_VERT_FMTSLV_MASK 0x1FFF +#define CCDC_FMT_VERT_FMTSLV_SHIFT 16 +#define CCDC_VP_OUT_VERT_NUM_MASK 0x3FFF +#define CCDC_VP_OUT_VERT_NUM_SHIFT 17 +#define CCDC_VP_OUT_HORZ_NUM_MASK 0x1FFF +#define CCDC_VP_OUT_HORZ_NUM_SHIFT 4 +#define CCDC_VP_OUT_HORZ_ST_MASK 0xF +#define CCDC_HORZ_INFO_SPH_SHIFT 16 +#define CCDC_VERT_START_SLV0_SHIFT 16 +#define CCDC_VDINT_VDINT0_SHIFT 16 +#define CCDC_VDINT_VDINT1_MASK 0xFFFF +#define CCDC_PPC_RAW 1 +#define CCDC_DCSUB_DEFAULT_VAL 0 +#define CCDC_CLAMP_DEFAULT_VAL 0 +#define CCDC_ENABLE_VIDEO_PORT 0x8000 +#define CCDC_DISABLE_VIDEO_PORT 0 +#define CCDC_COLPTN_VAL 0xBB11BB11 +#define CCDC_TWO_BYTES_PER_PIXEL 2 +#define CCDC_INTERLACED_IMAGE_INVERT 0x4B6D +#define CCDC_INTERLACED_NO_IMAGE_INVERT 0x0249 +#define CCDC_PROGRESSIVE_IMAGE_INVERT 0x4000 +#define CCDC_PROGRESSIVE_NO_IMAGE_INVERT 0 +#define CCDC_INTERLACED_HEIGHT_SHIFT 1 +#define CCDC_SYN_MODE_INPMOD_SHIFT 12 +#define CCDC_SYN_MODE_INPMOD_MASK 3 +#define CCDC_SYN_MODE_8BITS (7 << 8) +#define CCDC_SYN_MODE_10BITS (6 << 8) +#define CCDC_SYN_MODE_11BITS (5 << 8) +#define CCDC_SYN_MODE_12BITS (4 << 8) +#define CCDC_SYN_MODE_13BITS (3 << 8) +#define CCDC_SYN_MODE_14BITS (2 << 8) +#define CCDC_SYN_MODE_15BITS (1 << 8) +#define CCDC_SYN_MODE_16BITS (0 << 8) +#define CCDC_SYN_FLDMODE_MASK 1 +#define CCDC_SYN_FLDMODE_SHIFT 7 +#define CCDC_REC656IF_BT656_EN 3 +#define CCDC_SYN_MODE_VD_POL_NEGATIVE BIT(2) +#define CCDC_CCDCFG_Y8POS_SHIFT 11 +#define CCDC_CCDCFG_BW656_10BIT BIT(5) +#define CCDC_SDOFST_FIELD_INTERLEAVED 0x249 +#define CCDC_NO_CULLING 0xffff00ff +#endif diff --git a/drivers/staging/media/deprecated/vpfe_capture/isif.c b/drivers/staging/media/deprecated/vpfe_capture/isif.c new file mode 100644 index 000000000000..4059891c2824 --- /dev/null +++ b/drivers/staging/media/deprecated/vpfe_capture/isif.c @@ -0,0 +1,1127 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * Image Sensor Interface (ISIF) driver + * + * This driver is for configuring the ISIF IP available on DM365 or any other + * TI SoCs. This is used for capturing yuv or bayer video or image data + * from a decoder or sensor. This IP is similar to the CCDC IP on DM355 + * and DM6446, but with enhanced or additional ip blocks. The driver + * configures the ISIF upon commands from the vpfe bridge driver through + * ccdc_hw_device interface. + * + * TODO: 1) Raw bayer parameter settings and bayer capture + * 2) Add support for control ioctl + */ +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/io.h> +#include <linux/videodev2.h> +#include <linux/err.h> +#include <linux/module.h> + +#include "isif.h" +#include <media/davinci/vpss.h> + +#include "isif_regs.h" +#include "ccdc_hw_device.h" + +/* Defaults for module configuration parameters */ +static const struct isif_config_params_raw isif_config_defaults = { + .linearize = { + .en = 0, + .corr_shft = ISIF_NO_SHIFT, + .scale_fact = {1, 0}, + }, + .df_csc = { + .df_or_csc = 0, + .csc = { + .en = 0, + }, + }, + .dfc = { + .en = 0, + }, + .bclamp = { + .en = 0, + }, + .gain_offset = { + .gain = { + .r_ye = {1, 0}, + .gr_cy = {1, 0}, + .gb_g = {1, 0}, + .b_mg = {1, 0}, + }, + }, + .culling = { + .hcpat_odd = 0xff, + .hcpat_even = 0xff, + .vcpat = 0xff, + }, + .compress = { + .alg = ISIF_ALAW, + }, +}; + +/* ISIF operation configuration */ +static struct isif_oper_config { + struct device *dev; + enum vpfe_hw_if_type if_type; + struct isif_ycbcr_config ycbcr; + struct isif_params_raw bayer; + enum isif_data_pack data_pack; + /* ISIF base address */ + void __iomem *base_addr; + /* ISIF Linear Table 0 */ + void __iomem *linear_tbl0_addr; + /* ISIF Linear Table 1 */ + void __iomem *linear_tbl1_addr; +} isif_cfg = { + .ycbcr = { + .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, + .frm_fmt = CCDC_FRMFMT_INTERLACED, + .win = ISIF_WIN_NTSC, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .pix_order = CCDC_PIXORDER_CBYCRY, + .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED, + }, + .bayer = { + .pix_fmt = CCDC_PIXFMT_RAW, + .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, + .win = ISIF_WIN_VGA, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .gain = { + .r_ye = {1, 0}, + .gr_cy = {1, 0}, + .gb_g = {1, 0}, + .b_mg = {1, 0}, + }, + .cfa_pat = ISIF_CFA_PAT_MOSAIC, + .data_msb = ISIF_BIT_MSB_11, + .config_params = { + .data_shift = ISIF_NO_SHIFT, + .col_pat_field0 = { + .olop = ISIF_GREEN_BLUE, + .olep = ISIF_BLUE, + .elop = ISIF_RED, + .elep = ISIF_GREEN_RED, + }, + .col_pat_field1 = { + .olop = ISIF_GREEN_BLUE, + .olep = ISIF_BLUE, + .elop = ISIF_RED, + .elep = ISIF_GREEN_RED, + }, + .test_pat_gen = 0, + }, + }, + .data_pack = ISIF_DATA_PACK8, +}; + +/* Raw Bayer formats */ +static const u32 isif_raw_bayer_pix_formats[] = { + V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; + +/* Raw YUV formats */ +static const u32 isif_raw_yuv_pix_formats[] = { + V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; + +/* register access routines */ +static inline u32 regr(u32 offset) +{ + return __raw_readl(isif_cfg.base_addr + offset); +} + +static inline void regw(u32 val, u32 offset) +{ + __raw_writel(val, isif_cfg.base_addr + offset); +} + +/* reg_modify() - read, modify and write register */ +static inline u32 reg_modify(u32 mask, u32 val, u32 offset) +{ + u32 new_val = (regr(offset) & ~mask) | (val & mask); + + regw(new_val, offset); + return new_val; +} + +static inline void regw_lin_tbl(u32 val, u32 offset, int i) +{ + if (!i) + __raw_writel(val, isif_cfg.linear_tbl0_addr + offset); + else + __raw_writel(val, isif_cfg.linear_tbl1_addr + offset); +} + +static void isif_disable_all_modules(void) +{ + /* disable BC */ + regw(0, CLAMPCFG); + /* disable vdfc */ + regw(0, DFCCTL); + /* disable CSC */ + regw(0, CSCCTL); + /* disable linearization */ + regw(0, LINCFG0); + /* disable other modules here as they are supported */ +} + +static void isif_enable(int en) +{ + if (!en) { + /* Before disable isif, disable all ISIF modules */ + isif_disable_all_modules(); + /* + * wait for next VD. Assume lowest scan rate is 12 Hz. So + * 100 msec delay is good enough + */ + msleep(100); + } + reg_modify(ISIF_SYNCEN_VDHDEN_MASK, en, SYNCEN); +} + +static void isif_enable_output_to_sdram(int en) +{ + reg_modify(ISIF_SYNCEN_WEN_MASK, en << ISIF_SYNCEN_WEN_SHIFT, SYNCEN); +} + +static void isif_config_culling(struct isif_cul *cul) +{ + u32 val; + + /* Horizontal pattern */ + val = (cul->hcpat_even << CULL_PAT_EVEN_LINE_SHIFT) | cul->hcpat_odd; + regw(val, CULH); + + /* vertical pattern */ + regw(cul->vcpat, CULV); + + /* LPF */ + reg_modify(ISIF_LPF_MASK << ISIF_LPF_SHIFT, + cul->en_lpf << ISIF_LPF_SHIFT, MODESET); +} + +static void isif_config_gain_offset(void) +{ + struct isif_gain_offsets_adj *gain_off_p = + &isif_cfg.bayer.config_params.gain_offset; + u32 val; + + val = (!!gain_off_p->gain_sdram_en << GAIN_SDRAM_EN_SHIFT) | + (!!gain_off_p->gain_ipipe_en << GAIN_IPIPE_EN_SHIFT) | + (!!gain_off_p->gain_h3a_en << GAIN_H3A_EN_SHIFT) | + (!!gain_off_p->offset_sdram_en << OFST_SDRAM_EN_SHIFT) | + (!!gain_off_p->offset_ipipe_en << OFST_IPIPE_EN_SHIFT) | + (!!gain_off_p->offset_h3a_en << OFST_H3A_EN_SHIFT); + + reg_modify(GAIN_OFFSET_EN_MASK, val, CGAMMAWD); + + val = (gain_off_p->gain.r_ye.integer << GAIN_INTEGER_SHIFT) | + gain_off_p->gain.r_ye.decimal; + regw(val, CRGAIN); + + val = (gain_off_p->gain.gr_cy.integer << GAIN_INTEGER_SHIFT) | + gain_off_p->gain.gr_cy.decimal; + regw(val, CGRGAIN); + + val = (gain_off_p->gain.gb_g.integer << GAIN_INTEGER_SHIFT) | + gain_off_p->gain.gb_g.decimal; + regw(val, CGBGAIN); + + val = (gain_off_p->gain.b_mg.integer << GAIN_INTEGER_SHIFT) | + gain_off_p->gain.b_mg.decimal; + regw(val, CBGAIN); + + regw(gain_off_p->offset, COFSTA); +} + +static void isif_restore_defaults(void) +{ + enum vpss_ccdc_source_sel source = VPSS_CCDCIN; + + dev_dbg(isif_cfg.dev, "\nstarting isif_restore_defaults..."); + isif_cfg.bayer.config_params = isif_config_defaults; + /* Enable clock to ISIF, IPIPEIF and BL */ + vpss_enable_clock(VPSS_CCDC_CLOCK, 1); + vpss_enable_clock(VPSS_IPIPEIF_CLOCK, 1); + vpss_enable_clock(VPSS_BL_CLOCK, 1); + /* Set default offset and gain */ + isif_config_gain_offset(); + vpss_select_ccdc_source(source); + dev_dbg(isif_cfg.dev, "\nEnd of isif_restore_defaults..."); +} + +static int isif_open(struct device *device) +{ + isif_restore_defaults(); + return 0; +} + +/* This function will configure the window size to be capture in ISIF reg */ +static void isif_setwin(struct v4l2_rect *image_win, + enum ccdc_frmfmt frm_fmt, int ppc) +{ + int horz_start, horz_nr_pixels; + int vert_start, vert_nr_lines; + int mid_img = 0; + + dev_dbg(isif_cfg.dev, "\nStarting isif_setwin..."); + /* + * ppc - per pixel count. indicates how many pixels per cell + * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. + * raw capture this is 1 + */ + horz_start = image_win->left << (ppc - 1); + horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1; + + /* Writing the horizontal info into the registers */ + regw(horz_start & START_PX_HOR_MASK, SPH); + regw(horz_nr_pixels & NUM_PX_HOR_MASK, LNH); + vert_start = image_win->top; + + if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + vert_nr_lines = (image_win->height >> 1) - 1; + vert_start >>= 1; + /* To account for VD since line 0 doesn't have any data */ + vert_start += 1; + } else { + /* To account for VD since line 0 doesn't have any data */ + vert_start += 1; + vert_nr_lines = image_win->height - 1; + /* configure VDINT0 and VDINT1 */ + mid_img = vert_start + (image_win->height / 2); + regw(mid_img, VDINT1); + } + + regw(0, VDINT0); + regw(vert_start & START_VER_ONE_MASK, SLV0); + regw(vert_start & START_VER_TWO_MASK, SLV1); + regw(vert_nr_lines & NUM_LINES_VER, LNV); +} + +static void isif_config_bclamp(struct isif_black_clamp *bc) +{ + u32 val; + + /* + * DC Offset is always added to image data irrespective of bc enable + * status + */ + regw(bc->dc_offset, CLDCOFST); + + if (bc->en) { + val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT; + + /* Enable BC and horizontal clamp calculation parameters */ + val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT); + + regw(val, CLAMPCFG); + + if (bc->horz.mode != ISIF_HORZ_BC_DISABLE) { + /* + * Window count for calculation + * Base window selection + * pixel limit + * Horizontal size of window + * vertical size of the window + * Horizontal start position of the window + * Vertical start position of the window + */ + val = bc->horz.win_count_calc | + ((!!bc->horz.base_win_sel_calc) << + ISIF_HORZ_BC_WIN_SEL_SHIFT) | + ((!!bc->horz.clamp_pix_limit) << + ISIF_HORZ_BC_PIX_LIMIT_SHIFT) | + (bc->horz.win_h_sz_calc << + ISIF_HORZ_BC_WIN_H_SIZE_SHIFT) | + (bc->horz.win_v_sz_calc << + ISIF_HORZ_BC_WIN_V_SIZE_SHIFT); + regw(val, CLHWIN0); + + regw(bc->horz.win_start_h_calc, CLHWIN1); + regw(bc->horz.win_start_v_calc, CLHWIN2); + } + + /* vertical clamp calculation parameters */ + + /* Reset clamp value sel for previous line */ + val |= + (bc->vert.reset_val_sel << ISIF_VERT_BC_RST_VAL_SEL_SHIFT) | + (bc->vert.line_ave_coef << ISIF_VERT_BC_LINE_AVE_COEF_SHIFT); + regw(val, CLVWIN0); + + /* Optical Black horizontal start position */ + regw(bc->vert.ob_start_h, CLVWIN1); + /* Optical Black vertical start position */ + regw(bc->vert.ob_start_v, CLVWIN2); + /* Optical Black vertical size for calculation */ + regw(bc->vert.ob_v_sz_calc, CLVWIN3); + /* Vertical start position for BC subtraction */ + regw(bc->vert_start_sub, CLSV); + } +} + +static void isif_config_linearization(struct isif_linearize *linearize) +{ + u32 val, i; + + if (!linearize->en) { + regw(0, LINCFG0); + return; + } + + /* shift value for correction & enable linearization (set lsb) */ + val = (linearize->corr_shft << ISIF_LIN_CORRSFT_SHIFT) | 1; + regw(val, LINCFG0); + + /* Scale factor */ + val = ((!!linearize->scale_fact.integer) << + ISIF_LIN_SCALE_FACT_INTEG_SHIFT) | + linearize->scale_fact.decimal; + regw(val, LINCFG1); + + for (i = 0; i < ISIF_LINEAR_TAB_SIZE; i++) { + if (i % 2) + regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 1); + else + regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 0); + } +} + +static int isif_config_dfc(struct isif_dfc *vdfc) +{ + /* initialize retries to loop for max ~ 250 usec */ + u32 val, count, retries = loops_per_jiffy / (4000/HZ); + int i; + + if (!vdfc->en) + return 0; + + /* Correction mode */ + val = (vdfc->corr_mode << ISIF_VDFC_CORR_MOD_SHIFT); + + /* Correct whole line or partial */ + if (vdfc->corr_whole_line) + val |= 1 << ISIF_VDFC_CORR_WHOLE_LN_SHIFT; + + /* level shift value */ + val |= vdfc->def_level_shift << ISIF_VDFC_LEVEL_SHFT_SHIFT; + + regw(val, DFCCTL); + + /* Defect saturation level */ + regw(vdfc->def_sat_level, VDFSATLV); + + regw(vdfc->table[0].pos_vert, DFCMEM0); + regw(vdfc->table[0].pos_horz, DFCMEM1); + if (vdfc->corr_mode == ISIF_VDFC_NORMAL || + vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) { + regw(vdfc->table[0].level_at_pos, DFCMEM2); + regw(vdfc->table[0].level_up_pixels, DFCMEM3); + regw(vdfc->table[0].level_low_pixels, DFCMEM4); + } + + /* set DFCMARST and set DFCMWR */ + val = regr(DFCMEMCTL) | (1 << ISIF_DFCMEMCTL_DFCMARST_SHIFT) | 1; + regw(val, DFCMEMCTL); + + count = retries; + while (count && (regr(DFCMEMCTL) & 0x1)) + count--; + + if (!count) { + dev_dbg(isif_cfg.dev, "defect table write timeout !!!\n"); + return -1; + } + + for (i = 1; i < vdfc->num_vdefects; i++) { + regw(vdfc->table[i].pos_vert, DFCMEM0); + regw(vdfc->table[i].pos_horz, DFCMEM1); + if (vdfc->corr_mode == ISIF_VDFC_NORMAL || + vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) { + regw(vdfc->table[i].level_at_pos, DFCMEM2); + regw(vdfc->table[i].level_up_pixels, DFCMEM3); + regw(vdfc->table[i].level_low_pixels, DFCMEM4); + } + val = regr(DFCMEMCTL); + /* clear DFCMARST and set DFCMWR */ + val &= ~BIT(ISIF_DFCMEMCTL_DFCMARST_SHIFT); + val |= 1; + regw(val, DFCMEMCTL); + + count = retries; + while (count && (regr(DFCMEMCTL) & 0x1)) + count--; + + if (!count) { + dev_err(isif_cfg.dev, + "defect table write timeout !!!\n"); + return -1; + } + } + if (vdfc->num_vdefects < ISIF_VDFC_TABLE_SIZE) { + /* Extra cycle needed */ + regw(0, DFCMEM0); + regw(0x1FFF, DFCMEM1); + regw(1, DFCMEMCTL); + } + + /* enable VDFC */ + reg_modify((1 << ISIF_VDFC_EN_SHIFT), (1 << ISIF_VDFC_EN_SHIFT), + DFCCTL); + return 0; +} + +static void isif_config_csc(struct isif_df_csc *df_csc) +{ + u32 val1 = 0, val2 = 0, i; + + if (!df_csc->csc.en) { + regw(0, CSCCTL); + return; + } + for (i = 0; i < ISIF_CSC_NUM_COEFF; i++) { + if ((i % 2) == 0) { + /* CSCM - LSB */ + val1 = (df_csc->csc.coeff[i].integer << + ISIF_CSC_COEF_INTEG_SHIFT) | + df_csc->csc.coeff[i].decimal; + } else { + + /* CSCM - MSB */ + val2 = (df_csc->csc.coeff[i].integer << + ISIF_CSC_COEF_INTEG_SHIFT) | + df_csc->csc.coeff[i].decimal; + val2 <<= ISIF_CSCM_MSB_SHIFT; + val2 |= val1; + regw(val2, (CSCM0 + ((i - 1) << 1))); + } + } + + /* program the active area */ + regw(df_csc->start_pix, FMTSPH); + /* + * one extra pixel as required for CSC. Actually number of + * pixel - 1 should be configured in this register. So we + * need to subtract 1 before writing to FMTSPH, but we will + * not do this since csc requires one extra pixel + */ + regw(df_csc->num_pixels, FMTLNH); + regw(df_csc->start_line, FMTSLV); + /* + * one extra line as required for CSC. See reason documented for + * num_pixels + */ + regw(df_csc->num_lines, FMTLNV); + + /* Enable CSC */ + regw(1, CSCCTL); +} + +static int isif_config_raw(void) +{ + struct isif_params_raw *params = &isif_cfg.bayer; + struct isif_config_params_raw *module_params = + &isif_cfg.bayer.config_params; + struct vpss_pg_frame_size frame_size; + struct vpss_sync_pol sync; + u32 val; + + dev_dbg(isif_cfg.dev, "\nStarting isif_config_raw..\n"); + + /* + * Configure CCDCFG register:- + * Set CCD Not to swap input since input is RAW data + * Set FID detection function to Latch at V-Sync + * Set WENLOG - isif valid area + * Set TRGSEL + * Set EXTRG + * Packed to 8 or 16 bits + */ + + val = ISIF_YCINSWP_RAW | ISIF_CCDCFG_FIDMD_LATCH_VSYNC | + ISIF_CCDCFG_WENLOG_AND | ISIF_CCDCFG_TRGSEL_WEN | + ISIF_CCDCFG_EXTRG_DISABLE | isif_cfg.data_pack; + + dev_dbg(isif_cfg.dev, "Writing 0x%x to ...CCDCFG \n", val); + regw(val, CCDCFG); + + /* + * Configure the vertical sync polarity(MODESET.VDPOL) + * Configure the horizontal sync polarity (MODESET.HDPOL) + * Configure frame id polarity (MODESET.FLDPOL) + * Configure data polarity + * Configure External WEN Selection + * Configure frame format(progressive or interlace) + * Configure pixel format (Input mode) + * Configure the data shift + */ + + val = ISIF_VDHDOUT_INPUT | (params->vd_pol << ISIF_VD_POL_SHIFT) | + (params->hd_pol << ISIF_HD_POL_SHIFT) | + (params->fid_pol << ISIF_FID_POL_SHIFT) | + (ISIF_DATAPOL_NORMAL << ISIF_DATAPOL_SHIFT) | + (ISIF_EXWEN_DISABLE << ISIF_EXWEN_SHIFT) | + (params->frm_fmt << ISIF_FRM_FMT_SHIFT) | + (params->pix_fmt << ISIF_INPUT_SHIFT) | + (params->config_params.data_shift << ISIF_DATASFT_SHIFT); + + regw(val, MODESET); + dev_dbg(isif_cfg.dev, "Writing 0x%x to MODESET...\n", val); + + /* + * Configure GAMMAWD register + * CFA pattern setting + */ + val = params->cfa_pat << ISIF_GAMMAWD_CFA_SHIFT; + + /* Gamma msb */ + if (module_params->compress.alg == ISIF_ALAW) + val |= ISIF_ALAW_ENABLE; + + val |= (params->data_msb << ISIF_ALAW_GAMMA_WD_SHIFT); + regw(val, CGAMMAWD); + + /* Configure DPCM compression settings */ + if (module_params->compress.alg == ISIF_DPCM) { + val = BIT(ISIF_DPCM_EN_SHIFT) | + (module_params->compress.pred << + ISIF_DPCM_PREDICTOR_SHIFT); + } + + regw(val, MISC); + + /* Configure Gain & Offset */ + isif_config_gain_offset(); + + /* Configure Color pattern */ + val = (params->config_params.col_pat_field0.olop) | + (params->config_params.col_pat_field0.olep << 2) | + (params->config_params.col_pat_field0.elop << 4) | + (params->config_params.col_pat_field0.elep << 6) | + (params->config_params.col_pat_field1.olop << 8) | + (params->config_params.col_pat_field1.olep << 10) | + (params->config_params.col_pat_field1.elop << 12) | + (params->config_params.col_pat_field1.elep << 14); + regw(val, CCOLP); + dev_dbg(isif_cfg.dev, "Writing %x to CCOLP ...\n", val); + + /* Configure HSIZE register */ + val = (!!params->horz_flip_en) << ISIF_HSIZE_FLIP_SHIFT; + + /* calculate line offset in 32 bytes based on pack value */ + if (isif_cfg.data_pack == ISIF_PACK_8BIT) + val |= ((params->win.width + 31) >> 5); + else if (isif_cfg.data_pack == ISIF_PACK_12BIT) + val |= (((params->win.width + + (params->win.width >> 2)) + 31) >> 5); + else + val |= (((params->win.width * 2) + 31) >> 5); + regw(val, HSIZE); + + /* Configure SDOFST register */ + if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { + if (params->image_invert_en) { + /* For interlace inverse mode */ + regw(0x4B6D, SDOFST); + dev_dbg(isif_cfg.dev, "Writing 0x4B6D to SDOFST...\n"); + } else { + /* For interlace non inverse mode */ + regw(0x0B6D, SDOFST); + dev_dbg(isif_cfg.dev, "Writing 0x0B6D to SDOFST...\n"); + } + } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { + if (params->image_invert_en) { + /* For progressive inverse mode */ + regw(0x4000, SDOFST); + dev_dbg(isif_cfg.dev, "Writing 0x4000 to SDOFST...\n"); + } else { + /* For progressive non inverse mode */ + regw(0x0000, SDOFST); + dev_dbg(isif_cfg.dev, "Writing 0x0000 to SDOFST...\n"); + } + } + + /* Configure video window */ + isif_setwin(¶ms->win, params->frm_fmt, 1); + + /* Configure Black Clamp */ + isif_config_bclamp(&module_params->bclamp); + + /* Configure Vertical Defection Pixel Correction */ + if (isif_config_dfc(&module_params->dfc) < 0) + return -EFAULT; + + if (!module_params->df_csc.df_or_csc) + /* Configure Color Space Conversion */ + isif_config_csc(&module_params->df_csc); + + isif_config_linearization(&module_params->linearize); + + /* Configure Culling */ + isif_config_culling(&module_params->culling); + + /* Configure horizontal and vertical offsets(DFC,LSC,Gain) */ + regw(module_params->horz_offset, DATAHOFST); + regw(module_params->vert_offset, DATAVOFST); + + /* Setup test pattern if enabled */ + if (params->config_params.test_pat_gen) { + /* Use the HD/VD pol settings from user */ + sync.ccdpg_hdpol = params->hd_pol; + sync.ccdpg_vdpol = params->vd_pol; + dm365_vpss_set_sync_pol(sync); + frame_size.hlpfr = isif_cfg.bayer.win.width; + frame_size.pplen = isif_cfg.bayer.win.height; + dm365_vpss_set_pg_frame_size(frame_size); + vpss_select_ccdc_source(VPSS_PGLPBK); + } + + dev_dbg(isif_cfg.dev, "\nEnd of isif_config_ycbcr...\n"); + return 0; +} + +static int isif_set_buftype(enum ccdc_buftype buf_type) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + isif_cfg.bayer.buf_type = buf_type; + else + isif_cfg.ycbcr.buf_type = buf_type; + + return 0; + +} +static enum ccdc_buftype isif_get_buftype(void) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + return isif_cfg.bayer.buf_type; + + return isif_cfg.ycbcr.buf_type; +} + +static int isif_enum_pix(u32 *pix, int i) +{ + int ret = -EINVAL; + + if (isif_cfg.if_type == VPFE_RAW_BAYER) { + if (i < ARRAY_SIZE(isif_raw_bayer_pix_formats)) { + *pix = isif_raw_bayer_pix_formats[i]; + ret = 0; + } + } else { + if (i < ARRAY_SIZE(isif_raw_yuv_pix_formats)) { + *pix = isif_raw_yuv_pix_formats[i]; + ret = 0; + } + } + + return ret; +} + +static int isif_set_pixel_format(unsigned int pixfmt) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) { + if (pixfmt == V4L2_PIX_FMT_SBGGR8) { + if ((isif_cfg.bayer.config_params.compress.alg != + ISIF_ALAW) && + (isif_cfg.bayer.config_params.compress.alg != + ISIF_DPCM)) { + dev_dbg(isif_cfg.dev, + "Either configure A-Law or DPCM\n"); + return -EINVAL; + } + isif_cfg.data_pack = ISIF_PACK_8BIT; + } else if (pixfmt == V4L2_PIX_FMT_SBGGR16) { + isif_cfg.bayer.config_params.compress.alg = + ISIF_NO_COMPRESSION; + isif_cfg.data_pack = ISIF_PACK_16BIT; + } else + return -EINVAL; + isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; + } else { + if (pixfmt == V4L2_PIX_FMT_YUYV) + isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; + else if (pixfmt == V4L2_PIX_FMT_UYVY) + isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + else + return -EINVAL; + isif_cfg.data_pack = ISIF_PACK_8BIT; + } + return 0; +} + +static u32 isif_get_pixel_format(void) +{ + u32 pixfmt; + + if (isif_cfg.if_type == VPFE_RAW_BAYER) + if (isif_cfg.bayer.config_params.compress.alg == ISIF_ALAW || + isif_cfg.bayer.config_params.compress.alg == ISIF_DPCM) + pixfmt = V4L2_PIX_FMT_SBGGR8; + else + pixfmt = V4L2_PIX_FMT_SBGGR16; + else { + if (isif_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) + pixfmt = V4L2_PIX_FMT_YUYV; + else + pixfmt = V4L2_PIX_FMT_UYVY; + } + return pixfmt; +} + +static int isif_set_image_window(struct v4l2_rect *win) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) { + isif_cfg.bayer.win.top = win->top; + isif_cfg.bayer.win.left = win->left; + isif_cfg.bayer.win.width = win->width; + isif_cfg.bayer.win.height = win->height; + } else { + isif_cfg.ycbcr.win.top = win->top; + isif_cfg.ycbcr.win.left = win->left; + isif_cfg.ycbcr.win.width = win->width; + isif_cfg.ycbcr.win.height = win->height; + } + return 0; +} + +static void isif_get_image_window(struct v4l2_rect *win) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + *win = isif_cfg.bayer.win; + else + *win = isif_cfg.ycbcr.win; +} + +static unsigned int isif_get_line_length(void) +{ + unsigned int len; + + if (isif_cfg.if_type == VPFE_RAW_BAYER) { + if (isif_cfg.data_pack == ISIF_PACK_8BIT) + len = ((isif_cfg.bayer.win.width)); + else if (isif_cfg.data_pack == ISIF_PACK_12BIT) + len = (((isif_cfg.bayer.win.width * 2) + + (isif_cfg.bayer.win.width >> 2))); + else + len = (((isif_cfg.bayer.win.width * 2))); + } else + len = (((isif_cfg.ycbcr.win.width * 2))); + return ALIGN(len, 32); +} + +static int isif_set_frame_format(enum ccdc_frmfmt frm_fmt) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + isif_cfg.bayer.frm_fmt = frm_fmt; + else + isif_cfg.ycbcr.frm_fmt = frm_fmt; + return 0; +} +static enum ccdc_frmfmt isif_get_frame_format(void) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + return isif_cfg.bayer.frm_fmt; + return isif_cfg.ycbcr.frm_fmt; +} + +static int isif_getfid(void) +{ + return (regr(MODESET) >> 15) & 0x1; +} + +/* misc operations */ +static void isif_setfbaddr(unsigned long addr) +{ + regw((addr >> 21) & 0x07ff, CADU); + regw((addr >> 5) & 0x0ffff, CADL); +} + +static int isif_set_hw_if_params(struct vpfe_hw_if_param *params) +{ + isif_cfg.if_type = params->if_type; + + switch (params->if_type) { + case VPFE_BT656: + case VPFE_BT656_10BIT: + case VPFE_YCBCR_SYNC_8: + isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT; + isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + break; + case VPFE_BT1120: + case VPFE_YCBCR_SYNC_16: + isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_16BIT; + isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + break; + case VPFE_RAW_BAYER: + isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; + break; + default: + dev_dbg(isif_cfg.dev, "Invalid interface type\n"); + return -EINVAL; + } + + return 0; +} + +/* This function will configure ISIF for YCbCr parameters. */ +static int isif_config_ycbcr(void) +{ + struct isif_ycbcr_config *params = &isif_cfg.ycbcr; + u32 modeset = 0, ccdcfg = 0; + + dev_dbg(isif_cfg.dev, "\nStarting isif_config_ycbcr..."); + + /* configure pixel format or input mode */ + modeset = modeset | (params->pix_fmt << ISIF_INPUT_SHIFT) | + (params->frm_fmt << ISIF_FRM_FMT_SHIFT) | + (params->fid_pol << ISIF_FID_POL_SHIFT) | + (params->hd_pol << ISIF_HD_POL_SHIFT) | + (params->vd_pol << ISIF_VD_POL_SHIFT); + + /* pack the data to 8-bit ISIFCFG */ + switch (isif_cfg.if_type) { + case VPFE_BT656: + if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { + dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); + return -EINVAL; + } + modeset |= (VPFE_PINPOL_NEGATIVE << ISIF_VD_POL_SHIFT); + regw(3, REC656IF); + ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR; + break; + case VPFE_BT656_10BIT: + if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { + dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); + return -EINVAL; + } + /* setup BT.656, embedded sync */ + regw(3, REC656IF); + /* enable 10 bit mode in ccdcfg */ + ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR | + ISIF_BW656_ENABLE; + break; + case VPFE_BT1120: + if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) { + dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); + return -EINVAL; + } + regw(3, REC656IF); + break; + + case VPFE_YCBCR_SYNC_8: + ccdcfg |= ISIF_DATA_PACK8; + ccdcfg |= ISIF_YCINSWP_YCBCR; + if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { + dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); + return -EINVAL; + } + break; + case VPFE_YCBCR_SYNC_16: + if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) { + dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); + return -EINVAL; + } + break; + default: + /* should never come here */ + dev_dbg(isif_cfg.dev, "Invalid interface type\n"); + return -EINVAL; + } + + regw(modeset, MODESET); + + /* Set up pix order */ + ccdcfg |= params->pix_order << ISIF_PIX_ORDER_SHIFT; + + regw(ccdcfg, CCDCFG); + + /* configure video window */ + if ((isif_cfg.if_type == VPFE_BT1120) || + (isif_cfg.if_type == VPFE_YCBCR_SYNC_16)) + isif_setwin(¶ms->win, params->frm_fmt, 1); + else + isif_setwin(¶ms->win, params->frm_fmt, 2); + + /* + * configure the horizontal line offset + * this is done by rounding up width to a multiple of 16 pixels + * and multiply by two to account for y:cb:cr 4:2:2 data + */ + regw(((((params->win.width * 2) + 31) & 0xffffffe0) >> 5), HSIZE); + + /* configure the memory line offset */ + if ((params->frm_fmt == CCDC_FRMFMT_INTERLACED) && + (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)) + /* two fields are interleaved in memory */ + regw(0x00000249, SDOFST); + + return 0; +} + +static int isif_configure(void) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + return isif_config_raw(); + return isif_config_ycbcr(); +} + +static int isif_close(struct device *device) +{ + /* copy defaults to module params */ + isif_cfg.bayer.config_params = isif_config_defaults; + return 0; +} + +static const struct ccdc_hw_device isif_hw_dev = { + .name = "ISIF", + .owner = THIS_MODULE, + .hw_ops = { + .open = isif_open, + .close = isif_close, + .enable = isif_enable, + .enable_out_to_sdram = isif_enable_output_to_sdram, + .set_hw_if_params = isif_set_hw_if_params, + .configure = isif_configure, + .set_buftype = isif_set_buftype, + .get_buftype = isif_get_buftype, + .enum_pix = isif_enum_pix, + .set_pixel_format = isif_set_pixel_format, + .get_pixel_format = isif_get_pixel_format, + .set_frame_format = isif_set_frame_format, + .get_frame_format = isif_get_frame_format, + .set_image_window = isif_set_image_window, + .get_image_window = isif_get_image_window, + .get_line_length = isif_get_line_length, + .setfbaddr = isif_setfbaddr, + .getfid = isif_getfid, + }, +}; + +static int isif_probe(struct platform_device *pdev) +{ + void (*setup_pinmux)(void); + struct resource *res; + void __iomem *addr; + int status = 0, i; + + /* Platform data holds setup_pinmux function ptr */ + if (!pdev->dev.platform_data) + return -ENODEV; + + /* + * first try to register with vpfe. If not correct platform, then we + * don't have to iomap + */ + status = vpfe_register_ccdc_device(&isif_hw_dev); + if (status < 0) + return status; + + setup_pinmux = pdev->dev.platform_data; + /* + * setup Mux configuration for ccdc which may be different for + * different SoCs using this CCDC + */ + setup_pinmux(); + + i = 0; + /* Get the ISIF base address, linearization table0 and table1 addr. */ + while (i < 3) { + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + if (!res) { + status = -ENODEV; + goto fail_nobase_res; + } + res = request_mem_region(res->start, resource_size(res), + res->name); + if (!res) { + status = -EBUSY; + goto fail_nobase_res; + } + addr = ioremap(res->start, resource_size(res)); + if (!addr) { + status = -ENOMEM; + goto fail_base_iomap; + } + switch (i) { + case 0: + /* ISIF base address */ + isif_cfg.base_addr = addr; + break; + case 1: + /* ISIF linear tbl0 address */ + isif_cfg.linear_tbl0_addr = addr; + break; + default: + /* ISIF linear tbl0 address */ + isif_cfg.linear_tbl1_addr = addr; + break; + } + i++; + } + isif_cfg.dev = &pdev->dev; + + printk(KERN_NOTICE "%s is registered with vpfe.\n", + isif_hw_dev.name); + return 0; +fail_base_iomap: + release_mem_region(res->start, resource_size(res)); + i--; +fail_nobase_res: + if (isif_cfg.base_addr) { + iounmap(isif_cfg.base_addr); + isif_cfg.base_addr = NULL; + } + if (isif_cfg.linear_tbl0_addr) { + iounmap(isif_cfg.linear_tbl0_addr); + isif_cfg.linear_tbl0_addr = NULL; + } + + while (i >= 0) { + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + if (res) + release_mem_region(res->start, resource_size(res)); + i--; + } + vpfe_unregister_ccdc_device(&isif_hw_dev); + return status; +} + +static int isif_remove(struct platform_device *pdev) +{ + struct resource *res; + int i = 0; + + iounmap(isif_cfg.base_addr); + isif_cfg.base_addr = NULL; + iounmap(isif_cfg.linear_tbl0_addr); + isif_cfg.linear_tbl0_addr = NULL; + iounmap(isif_cfg.linear_tbl1_addr); + isif_cfg.linear_tbl1_addr = NULL; + while (i < 3) { + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + release_mem_region(res->start, resource_size(res)); + i++; + } + vpfe_unregister_ccdc_device(&isif_hw_dev); + return 0; +} + +static struct platform_driver isif_driver = { + .driver = { + .name = "isif", + }, + .remove = isif_remove, + .probe = isif_probe, +}; + +module_platform_driver(isif_driver); + +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/media/deprecated/vpfe_capture/isif.h b/drivers/staging/media/deprecated/vpfe_capture/isif.h new file mode 100644 index 000000000000..8369acd26e7e --- /dev/null +++ b/drivers/staging/media/deprecated/vpfe_capture/isif.h @@ -0,0 +1,518 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * isif header file + */ +#ifndef _ISIF_H +#define _ISIF_H + +#include <media/davinci/ccdc_types.h> +#include <media/davinci/vpfe_types.h> + +/* isif float type S8Q8/U8Q8 */ +struct isif_float_8 { + /* 8 bit integer part */ + __u8 integer; + /* 8 bit decimal part */ + __u8 decimal; +}; + +/* isif float type U16Q16/S16Q16 */ +struct isif_float_16 { + /* 16 bit integer part */ + __u16 integer; + /* 16 bit decimal part */ + __u16 decimal; +}; + +/************************************************************************ + * Vertical Defect Correction parameters + ***********************************************************************/ +/* Defect Correction (DFC) table entry */ +struct isif_vdfc_entry { + /* vertical position of defect */ + __u16 pos_vert; + /* horizontal position of defect */ + __u16 pos_horz; + /* + * Defect level of Vertical line defect position. This is subtracted + * from the data at the defect position + */ + __u8 level_at_pos; + /* + * Defect level of the pixels upper than the vertical line defect. + * This is subtracted from the data + */ + __u8 level_up_pixels; + /* + * Defect level of the pixels lower than the vertical line defect. + * This is subtracted from the data + */ + __u8 level_low_pixels; +}; + +#define ISIF_VDFC_TABLE_SIZE 8 +struct isif_dfc { + /* enable vertical defect correction */ + __u8 en; + /* Defect level subtraction. Just fed through if saturating */ +#define ISIF_VDFC_NORMAL 0 + /* + * Defect level subtraction. Horizontal interpolation ((i-2)+(i+2))/2 + * if data saturating + */ +#define ISIF_VDFC_HORZ_INTERPOL_IF_SAT 1 + /* Horizontal interpolation (((i-2)+(i+2))/2) */ +#define ISIF_VDFC_HORZ_INTERPOL 2 + /* one of the vertical defect correction modes above */ + __u8 corr_mode; + /* 0 - whole line corrected, 1 - not pixels upper than the defect */ + __u8 corr_whole_line; +#define ISIF_VDFC_NO_SHIFT 0 +#define ISIF_VDFC_SHIFT_1 1 +#define ISIF_VDFC_SHIFT_2 2 +#define ISIF_VDFC_SHIFT_3 3 +#define ISIF_VDFC_SHIFT_4 4 + /* + * defect level shift value. level_at_pos, level_upper_pos, + * and level_lower_pos can be shifted up by this value. Choose + * one of the values above + */ + __u8 def_level_shift; + /* defect saturation level */ + __u16 def_sat_level; + /* number of vertical defects. Max is ISIF_VDFC_TABLE_SIZE */ + __u16 num_vdefects; + /* VDFC table ptr */ + struct isif_vdfc_entry table[ISIF_VDFC_TABLE_SIZE]; +}; + +struct isif_horz_bclamp { + + /* Horizontal clamp disabled. Only vertical clamp value is subtracted */ +#define ISIF_HORZ_BC_DISABLE 0 + /* + * Horizontal clamp value is calculated and subtracted from image data + * along with vertical clamp value + */ +#define ISIF_HORZ_BC_CLAMP_CALC_ENABLED 1 + /* + * Horizontal clamp value calculated from previous image is subtracted + * from image data along with vertical clamp value. + */ +#define ISIF_HORZ_BC_CLAMP_NOT_UPDATED 2 + /* horizontal clamp mode. One of the values above */ + __u8 mode; + /* + * pixel value limit enable. + * 0 - limit disabled + * 1 - pixel value limited to 1023 + */ + __u8 clamp_pix_limit; + /* Select Most left window for bc calculation */ +#define ISIF_SEL_MOST_LEFT_WIN 0 + /* Select Most right window for bc calculation */ +#define ISIF_SEL_MOST_RIGHT_WIN 1 + /* Select most left or right window for clamp val calculation */ + __u8 base_win_sel_calc; + /* Window count per color for calculation. range 1-32 */ + __u8 win_count_calc; + /* Window start position - horizontal for calculation. 0 - 8191 */ + __u16 win_start_h_calc; + /* Window start position - vertical for calculation 0 - 8191 */ + __u16 win_start_v_calc; +#define ISIF_HORZ_BC_SZ_H_2PIXELS 0 +#define ISIF_HORZ_BC_SZ_H_4PIXELS 1 +#define ISIF_HORZ_BC_SZ_H_8PIXELS 2 +#define ISIF_HORZ_BC_SZ_H_16PIXELS 3 + /* Width of the sample window in pixels for calculation */ + __u8 win_h_sz_calc; +#define ISIF_HORZ_BC_SZ_V_32PIXELS 0 +#define ISIF_HORZ_BC_SZ_V_64PIXELS 1 +#define ISIF_HORZ_BC_SZ_V_128PIXELS 2 +#define ISIF_HORZ_BC_SZ_V_256PIXELS 3 + /* Height of the sample window in pixels for calculation */ + __u8 win_v_sz_calc; +}; + +/************************************************************************ + * Black Clamp parameters + ***********************************************************************/ +struct isif_vert_bclamp { + /* Reset value used is the clamp value calculated */ +#define ISIF_VERT_BC_USE_HORZ_CLAMP_VAL 0 + /* Reset value used is reset_clamp_val configured */ +#define ISIF_VERT_BC_USE_CONFIG_CLAMP_VAL 1 + /* No update, previous image value is used */ +#define ISIF_VERT_BC_NO_UPDATE 2 + /* + * Reset value selector for vertical clamp calculation. Use one of + * the above values + */ + __u8 reset_val_sel; + /* U8Q8. Line average coefficient used in vertical clamp calculation */ + __u8 line_ave_coef; + /* Height of the optical black region for calculation */ + __u16 ob_v_sz_calc; + /* Optical black region start position - horizontal. 0 - 8191 */ + __u16 ob_start_h; + /* Optical black region start position - vertical 0 - 8191 */ + __u16 ob_start_v; +}; + +struct isif_black_clamp { + /* + * This offset value is added irrespective of the clamp enable status. + * S13 + */ + __u16 dc_offset; + /* + * Enable black/digital clamp value to be subtracted from the image data + */ + __u8 en; + /* + * black clamp mode. same/separate clamp for 4 colors + * 0 - disable - same clamp value for all colors + * 1 - clamp value calculated separately for all colors + */ + __u8 bc_mode_color; + /* Vertical start position for bc subtraction */ + __u16 vert_start_sub; + /* Black clamp for horizontal direction */ + struct isif_horz_bclamp horz; + /* Black clamp for vertical direction */ + struct isif_vert_bclamp vert; +}; + +/************************************************************************* +** Color Space Conversion (CSC) +*************************************************************************/ +#define ISIF_CSC_NUM_COEFF 16 +struct isif_color_space_conv { + /* Enable color space conversion */ + __u8 en; + /* + * csc coefficient table. S8Q5, M00 at index 0, M01 at index 1, and + * so forth + */ + struct isif_float_8 coeff[ISIF_CSC_NUM_COEFF]; +}; + + +/************************************************************************* +** Black Compensation parameters +*************************************************************************/ +struct isif_black_comp { + /* Comp for Red */ + __s8 r_comp; + /* Comp for Gr */ + __s8 gr_comp; + /* Comp for Blue */ + __s8 b_comp; + /* Comp for Gb */ + __s8 gb_comp; +}; + +/************************************************************************* +** Gain parameters +*************************************************************************/ +struct isif_gain { + /* Gain for Red or ye */ + struct isif_float_16 r_ye; + /* Gain for Gr or cy */ + struct isif_float_16 gr_cy; + /* Gain for Gb or g */ + struct isif_float_16 gb_g; + /* Gain for Blue or mg */ + struct isif_float_16 b_mg; +}; + +#define ISIF_LINEAR_TAB_SIZE 192 +/************************************************************************* +** Linearization parameters +*************************************************************************/ +struct isif_linearize { + /* Enable or Disable linearization of data */ + __u8 en; + /* Shift value applied */ + __u8 corr_shft; + /* scale factor applied U11Q10 */ + struct isif_float_16 scale_fact; + /* Size of the linear table */ + __u16 table[ISIF_LINEAR_TAB_SIZE]; +}; + +/* Color patterns */ +#define ISIF_RED 0 +#define ISIF_GREEN_RED 1 +#define ISIF_GREEN_BLUE 2 +#define ISIF_BLUE 3 +struct isif_col_pat { + __u8 olop; + __u8 olep; + __u8 elop; + __u8 elep; +}; + +/************************************************************************* +** Data formatter parameters +*************************************************************************/ +struct isif_fmtplen { + /* + * number of program entries for SET0, range 1 - 16 + * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is + * ISIF_COMBINE + */ + __u16 plen0; + /* + * number of program entries for SET1, range 1 - 16 + * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is + * ISIF_COMBINE + */ + __u16 plen1; + /** + * number of program entries for SET2, range 1 - 16 + * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is + * ISIF_COMBINE + */ + __u16 plen2; + /** + * number of program entries for SET3, range 1 - 16 + * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is + * ISIF_COMBINE + */ + __u16 plen3; +}; + +struct isif_fmt_cfg { +#define ISIF_SPLIT 0 +#define ISIF_COMBINE 1 + /* Split or combine or line alternate */ + __u8 fmtmode; + /* enable or disable line alternating mode */ + __u8 ln_alter_en; +#define ISIF_1LINE 0 +#define ISIF_2LINES 1 +#define ISIF_3LINES 2 +#define ISIF_4LINES 3 + /* Split/combine line number */ + __u8 lnum; + /* Address increment Range 1 - 16 */ + __u8 addrinc; +}; + +struct isif_fmt_addr_ptr { + /* Initial address */ + __u32 init_addr; + /* output line number */ +#define ISIF_1STLINE 0 +#define ISIF_2NDLINE 1 +#define ISIF_3RDLINE 2 +#define ISIF_4THLINE 3 + __u8 out_line; +}; + +struct isif_fmtpgm_ap { + /* program address pointer */ + __u8 pgm_aptr; + /* program address increment or decrement */ + __u8 pgmupdt; +}; + +struct isif_data_formatter { + /* Enable/Disable data formatter */ + __u8 en; + /* data formatter configuration */ + struct isif_fmt_cfg cfg; + /* Formatter program entries length */ + struct isif_fmtplen plen; + /* first pixel in a line fed to formatter */ + __u16 fmtrlen; + /* HD interval for output line. Only valid when split line */ + __u16 fmthcnt; + /* formatter address pointers */ + struct isif_fmt_addr_ptr fmtaddr_ptr[16]; + /* program enable/disable */ + __u8 pgm_en[32]; + /* program address pointers */ + struct isif_fmtpgm_ap fmtpgm_ap[32]; +}; + +struct isif_df_csc { + /* Color Space Conversion configuration, 0 - csc, 1 - df */ + __u8 df_or_csc; + /* csc configuration valid if df_or_csc is 0 */ + struct isif_color_space_conv csc; + /* data formatter configuration valid if df_or_csc is 1 */ + struct isif_data_formatter df; + /* start pixel in a line at the input */ + __u32 start_pix; + /* number of pixels in input line */ + __u32 num_pixels; + /* start line at the input */ + __u32 start_line; + /* number of lines at the input */ + __u32 num_lines; +}; + +struct isif_gain_offsets_adj { + /* Gain adjustment per color */ + struct isif_gain gain; + /* Offset adjustment */ + __u16 offset; + /* Enable or Disable Gain adjustment for SDRAM data */ + __u8 gain_sdram_en; + /* Enable or Disable Gain adjustment for IPIPE data */ + __u8 gain_ipipe_en; + /* Enable or Disable Gain adjustment for H3A data */ + __u8 gain_h3a_en; + /* Enable or Disable Gain adjustment for SDRAM data */ + __u8 offset_sdram_en; + /* Enable or Disable Gain adjustment for IPIPE data */ + __u8 offset_ipipe_en; + /* Enable or Disable Gain adjustment for H3A data */ + __u8 offset_h3a_en; +}; + +struct isif_cul { + /* Horizontal Cull pattern for odd lines */ + __u8 hcpat_odd; + /* Horizontal Cull pattern for even lines */ + __u8 hcpat_even; + /* Vertical Cull pattern */ + __u8 vcpat; + /* Enable or disable lpf. Apply when cull is enabled */ + __u8 en_lpf; +}; + +struct isif_compress { +#define ISIF_ALAW 0 +#define ISIF_DPCM 1 +#define ISIF_NO_COMPRESSION 2 + /* Compression Algorithm used */ + __u8 alg; + /* Choose Predictor1 for DPCM compression */ +#define ISIF_DPCM_PRED1 0 + /* Choose Predictor2 for DPCM compression */ +#define ISIF_DPCM_PRED2 1 + /* Predictor for DPCM compression */ + __u8 pred; +}; + +/* all the stuff in this struct will be provided by userland */ +struct isif_config_params_raw { + /* Linearization parameters for image sensor data input */ + struct isif_linearize linearize; + /* Data formatter or CSC */ + struct isif_df_csc df_csc; + /* Defect Pixel Correction (DFC) configuration */ + struct isif_dfc dfc; + /* Black/Digital Clamp configuration */ + struct isif_black_clamp bclamp; + /* Gain, offset adjustments */ + struct isif_gain_offsets_adj gain_offset; + /* Culling */ + struct isif_cul culling; + /* A-Law and DPCM compression options */ + struct isif_compress compress; + /* horizontal offset for Gain/LSC/DFC */ + __u16 horz_offset; + /* vertical offset for Gain/LSC/DFC */ + __u16 vert_offset; + /* color pattern for field 0 */ + struct isif_col_pat col_pat_field0; + /* color pattern for field 1 */ + struct isif_col_pat col_pat_field1; +#define ISIF_NO_SHIFT 0 +#define ISIF_1BIT_SHIFT 1 +#define ISIF_2BIT_SHIFT 2 +#define ISIF_3BIT_SHIFT 3 +#define ISIF_4BIT_SHIFT 4 +#define ISIF_5BIT_SHIFT 5 +#define ISIF_6BIT_SHIFT 6 + /* Data shift applied before storing to SDRAM */ + __u8 data_shift; + /* enable input test pattern generation */ + __u8 test_pat_gen; +}; + +#ifdef __KERNEL__ +struct isif_ycbcr_config { + /* isif pixel format */ + enum ccdc_pixfmt pix_fmt; + /* isif frame format */ + enum ccdc_frmfmt frm_fmt; + /* ISIF crop window */ + struct v4l2_rect win; + /* field polarity */ + enum vpfe_pin_pol fid_pol; + /* interface VD polarity */ + enum vpfe_pin_pol vd_pol; + /* interface HD polarity */ + enum vpfe_pin_pol hd_pol; + /* isif pix order. Only used for ycbcr capture */ + enum ccdc_pixorder pix_order; + /* isif buffer type. Only used for ycbcr capture */ + enum ccdc_buftype buf_type; +}; + +/* MSB of image data connected to sensor port */ +enum isif_data_msb { + ISIF_BIT_MSB_15, + ISIF_BIT_MSB_14, + ISIF_BIT_MSB_13, + ISIF_BIT_MSB_12, + ISIF_BIT_MSB_11, + ISIF_BIT_MSB_10, + ISIF_BIT_MSB_9, + ISIF_BIT_MSB_8, + ISIF_BIT_MSB_7 +}; + +enum isif_cfa_pattern { + ISIF_CFA_PAT_MOSAIC, + ISIF_CFA_PAT_STRIPE +}; + +struct isif_params_raw { + /* isif pixel format */ + enum ccdc_pixfmt pix_fmt; + /* isif frame format */ + enum ccdc_frmfmt frm_fmt; + /* video window */ + struct v4l2_rect win; + /* field polarity */ + enum vpfe_pin_pol fid_pol; + /* interface VD polarity */ + enum vpfe_pin_pol vd_pol; + /* interface HD polarity */ + enum vpfe_pin_pol hd_pol; + /* buffer type. Applicable for interlaced mode */ + enum ccdc_buftype buf_type; + /* Gain values */ + struct isif_gain gain; + /* cfa pattern */ + enum isif_cfa_pattern cfa_pat; + /* Data MSB position */ + enum isif_data_msb data_msb; + /* Enable horizontal flip */ + unsigned char horz_flip_en; + /* Enable image invert vertically */ + unsigned char image_invert_en; + + /* all the userland defined stuff*/ + struct isif_config_params_raw config_params; +}; + +enum isif_data_pack { + ISIF_PACK_16BIT, + ISIF_PACK_12BIT, + ISIF_PACK_8BIT +}; + +#define ISIF_WIN_NTSC {0, 0, 720, 480} +#define ISIF_WIN_VGA {0, 0, 640, 480} + +#endif +#endif diff --git a/drivers/staging/media/deprecated/vpfe_capture/isif_regs.h b/drivers/staging/media/deprecated/vpfe_capture/isif_regs.h new file mode 100644 index 000000000000..d68d38841ae7 --- /dev/null +++ b/drivers/staging/media/deprecated/vpfe_capture/isif_regs.h @@ -0,0 +1,256 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + */ +#ifndef _ISIF_REGS_H +#define _ISIF_REGS_H + +/* ISIF registers relative offsets */ +#define SYNCEN 0x00 +#define MODESET 0x04 +#define HDW 0x08 +#define VDW 0x0c +#define PPLN 0x10 +#define LPFR 0x14 +#define SPH 0x18 +#define LNH 0x1c +#define SLV0 0x20 +#define SLV1 0x24 +#define LNV 0x28 +#define CULH 0x2c +#define CULV 0x30 +#define HSIZE 0x34 +#define SDOFST 0x38 +#define CADU 0x3c +#define CADL 0x40 +#define LINCFG0 0x44 +#define LINCFG1 0x48 +#define CCOLP 0x4c +#define CRGAIN 0x50 +#define CGRGAIN 0x54 +#define CGBGAIN 0x58 +#define CBGAIN 0x5c +#define COFSTA 0x60 +#define FLSHCFG0 0x64 +#define FLSHCFG1 0x68 +#define FLSHCFG2 0x6c +#define VDINT0 0x70 +#define VDINT1 0x74 +#define VDINT2 0x78 +#define MISC 0x7c +#define CGAMMAWD 0x80 +#define REC656IF 0x84 +#define CCDCFG 0x88 +/***************************************************** +* Defect Correction registers +*****************************************************/ +#define DFCCTL 0x8c +#define VDFSATLV 0x90 +#define DFCMEMCTL 0x94 +#define DFCMEM0 0x98 +#define DFCMEM1 0x9c +#define DFCMEM2 0xa0 +#define DFCMEM3 0xa4 +#define DFCMEM4 0xa8 +/**************************************************** +* Black Clamp registers +****************************************************/ +#define CLAMPCFG 0xac +#define CLDCOFST 0xb0 +#define CLSV 0xb4 +#define CLHWIN0 0xb8 +#define CLHWIN1 0xbc +#define CLHWIN2 0xc0 +#define CLVRV 0xc4 +#define CLVWIN0 0xc8 +#define CLVWIN1 0xcc +#define CLVWIN2 0xd0 +#define CLVWIN3 0xd4 +/**************************************************** +* Lense Shading Correction +****************************************************/ +#define DATAHOFST 0xd8 +#define DATAVOFST 0xdc +#define LSCHVAL 0xe0 +#define LSCVVAL 0xe4 +#define TWODLSCCFG 0xe8 +#define TWODLSCOFST 0xec +#define TWODLSCINI 0xf0 +#define TWODLSCGRBU 0xf4 +#define TWODLSCGRBL 0xf8 +#define TWODLSCGROF 0xfc +#define TWODLSCORBU 0x100 +#define TWODLSCORBL 0x104 +#define TWODLSCOROF 0x108 +#define TWODLSCIRQEN 0x10c +#define TWODLSCIRQST 0x110 +/**************************************************** +* Data formatter +****************************************************/ +#define FMTCFG 0x114 +#define FMTPLEN 0x118 +#define FMTSPH 0x11c +#define FMTLNH 0x120 +#define FMTSLV 0x124 +#define FMTLNV 0x128 +#define FMTRLEN 0x12c +#define FMTHCNT 0x130 +#define FMTAPTR_BASE 0x134 +/* Below macro for addresses FMTAPTR0 - FMTAPTR15 */ +#define FMTAPTR(i) (FMTAPTR_BASE + (i * 4)) +#define FMTPGMVF0 0x174 +#define FMTPGMVF1 0x178 +#define FMTPGMAPU0 0x17c +#define FMTPGMAPU1 0x180 +#define FMTPGMAPS0 0x184 +#define FMTPGMAPS1 0x188 +#define FMTPGMAPS2 0x18c +#define FMTPGMAPS3 0x190 +#define FMTPGMAPS4 0x194 +#define FMTPGMAPS5 0x198 +#define FMTPGMAPS6 0x19c +#define FMTPGMAPS7 0x1a0 +/************************************************ +* Color Space Converter +************************************************/ +#define CSCCTL 0x1a4 +#define CSCM0 0x1a8 +#define CSCM1 0x1ac +#define CSCM2 0x1b0 +#define CSCM3 0x1b4 +#define CSCM4 0x1b8 +#define CSCM5 0x1bc +#define CSCM6 0x1c0 +#define CSCM7 0x1c4 +#define OBWIN0 0x1c8 +#define OBWIN1 0x1cc +#define OBWIN2 0x1d0 +#define OBWIN3 0x1d4 +#define OBVAL0 0x1d8 +#define OBVAL1 0x1dc +#define OBVAL2 0x1e0 +#define OBVAL3 0x1e4 +#define OBVAL4 0x1e8 +#define OBVAL5 0x1ec +#define OBVAL6 0x1f0 +#define OBVAL7 0x1f4 +#define CLKCTL 0x1f8 + +/* Masks & Shifts below */ +#define START_PX_HOR_MASK 0x7FFF +#define NUM_PX_HOR_MASK 0x7FFF +#define START_VER_ONE_MASK 0x7FFF +#define START_VER_TWO_MASK 0x7FFF +#define NUM_LINES_VER 0x7FFF + +/* gain - offset masks */ +#define GAIN_INTEGER_SHIFT 9 +#define OFFSET_MASK 0xFFF +#define GAIN_SDRAM_EN_SHIFT 12 +#define GAIN_IPIPE_EN_SHIFT 13 +#define GAIN_H3A_EN_SHIFT 14 +#define OFST_SDRAM_EN_SHIFT 8 +#define OFST_IPIPE_EN_SHIFT 9 +#define OFST_H3A_EN_SHIFT 10 +#define GAIN_OFFSET_EN_MASK 0x7700 + +/* Culling */ +#define CULL_PAT_EVEN_LINE_SHIFT 8 + +/* CCDCFG register */ +#define ISIF_YCINSWP_RAW (0x00 << 4) +#define ISIF_YCINSWP_YCBCR (0x01 << 4) +#define ISIF_CCDCFG_FIDMD_LATCH_VSYNC (0x00 << 6) +#define ISIF_CCDCFG_WENLOG_AND (0x00 << 8) +#define ISIF_CCDCFG_TRGSEL_WEN (0x00 << 9) +#define ISIF_CCDCFG_EXTRG_DISABLE (0x00 << 10) +#define ISIF_LATCH_ON_VSYNC_DISABLE (0x01 << 15) +#define ISIF_LATCH_ON_VSYNC_ENABLE (0x00 << 15) +#define ISIF_DATA_PACK_MASK 3 +#define ISIF_DATA_PACK16 0 +#define ISIF_DATA_PACK12 1 +#define ISIF_DATA_PACK8 2 +#define ISIF_PIX_ORDER_SHIFT 11 +#define ISIF_BW656_ENABLE (0x01 << 5) + +/* MODESET registers */ +#define ISIF_VDHDOUT_INPUT (0x00 << 0) +#define ISIF_INPUT_SHIFT 12 +#define ISIF_RAW_INPUT_MODE 0 +#define ISIF_FID_POL_SHIFT 4 +#define ISIF_HD_POL_SHIFT 3 +#define ISIF_VD_POL_SHIFT 2 +#define ISIF_DATAPOL_NORMAL 0 +#define ISIF_DATAPOL_SHIFT 6 +#define ISIF_EXWEN_DISABLE 0 +#define ISIF_EXWEN_SHIFT 5 +#define ISIF_FRM_FMT_SHIFT 7 +#define ISIF_DATASFT_SHIFT 8 +#define ISIF_LPF_SHIFT 14 +#define ISIF_LPF_MASK 1 + +/* GAMMAWD registers */ +#define ISIF_ALAW_GAMMA_WD_MASK 0xF +#define ISIF_ALAW_GAMMA_WD_SHIFT 1 +#define ISIF_ALAW_ENABLE 1 +#define ISIF_GAMMAWD_CFA_SHIFT 5 + +/* HSIZE registers */ +#define ISIF_HSIZE_FLIP_MASK 1 +#define ISIF_HSIZE_FLIP_SHIFT 12 + +/* MISC registers */ +#define ISIF_DPCM_EN_SHIFT 12 +#define ISIF_DPCM_PREDICTOR_SHIFT 13 + +/* Black clamp related */ +#define ISIF_BC_MODE_COLOR_SHIFT 4 +#define ISIF_HORZ_BC_MODE_SHIFT 1 +#define ISIF_HORZ_BC_WIN_SEL_SHIFT 5 +#define ISIF_HORZ_BC_PIX_LIMIT_SHIFT 6 +#define ISIF_HORZ_BC_WIN_H_SIZE_SHIFT 8 +#define ISIF_HORZ_BC_WIN_V_SIZE_SHIFT 12 +#define ISIF_VERT_BC_RST_VAL_SEL_SHIFT 4 +#define ISIF_VERT_BC_LINE_AVE_COEF_SHIFT 8 + +/* VDFC registers */ +#define ISIF_VDFC_EN_SHIFT 4 +#define ISIF_VDFC_CORR_MOD_SHIFT 5 +#define ISIF_VDFC_CORR_WHOLE_LN_SHIFT 7 +#define ISIF_VDFC_LEVEL_SHFT_SHIFT 8 +#define ISIF_VDFC_POS_MASK 0x1FFF +#define ISIF_DFCMEMCTL_DFCMARST_SHIFT 2 + +/* CSC registers */ +#define ISIF_CSC_COEF_INTEG_MASK 7 +#define ISIF_CSC_COEF_DECIMAL_MASK 0x1f +#define ISIF_CSC_COEF_INTEG_SHIFT 5 +#define ISIF_CSCM_MSB_SHIFT 8 +#define ISIF_DF_CSC_SPH_MASK 0x1FFF +#define ISIF_DF_CSC_LNH_MASK 0x1FFF +#define ISIF_DF_CSC_SLV_MASK 0x1FFF +#define ISIF_DF_CSC_LNV_MASK 0x1FFF +#define ISIF_DF_NUMLINES 0x7FFF +#define ISIF_DF_NUMPIX 0x1FFF + +/* Offsets for LSC/DFC/Gain */ +#define ISIF_DATA_H_OFFSET_MASK 0x1FFF +#define ISIF_DATA_V_OFFSET_MASK 0x1FFF + +/* Linearization */ +#define ISIF_LIN_CORRSFT_SHIFT 4 +#define ISIF_LIN_SCALE_FACT_INTEG_SHIFT 10 + + +/* Pattern registers */ +#define ISIF_PG_EN (1 << 3) +#define ISIF_SEL_PG_SRC (3 << 4) +#define ISIF_PG_VD_POL_SHIFT 0 +#define ISIF_PG_HD_POL_SHIFT 1 + +/*random other junk*/ +#define ISIF_SYNCEN_VDHDEN_MASK (1 << 0) +#define ISIF_SYNCEN_WEN_MASK (1 << 1) +#define ISIF_SYNCEN_WEN_SHIFT 1 + +#endif diff --git a/drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c b/drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c new file mode 100644 index 000000000000..0a2226b321d7 --- /dev/null +++ b/drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c @@ -0,0 +1,1902 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * Driver name : VPFE Capture driver + * VPFE Capture driver allows applications to capture and stream video + * frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as + * TVP5146 or Raw Bayer RGB image data from an image sensor + * such as Microns' MT9T001, MT9T031 etc. + * + * These SoCs have, in common, a Video Processing Subsystem (VPSS) that + * consists of a Video Processing Front End (VPFE) for capturing + * video/raw image data and Video Processing Back End (VPBE) for displaying + * YUV data through an in-built analog encoder or Digital LCD port. This + * driver is for capture through VPFE. A typical EVM using these SoCs have + * following high level configuration. + * + * decoder(TVP5146/ YUV/ + * MT9T001) --> Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF) + * data input | | + * V | + * SDRAM | + * V + * Image Processor + * | + * V + * SDRAM + * The data flow happens from a decoder connected to the VPFE over a + * YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface + * and to the input of VPFE through an optional MUX (if more inputs are + * to be interfaced on the EVM). The input data is first passed through + * CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC + * does very little or no processing on YUV data and does pre-process Raw + * Bayer RGB data through modules such as Defect Pixel Correction (DFC) + * Color Space Conversion (CSC), data gain/offset etc. After this, data + * can be written to SDRAM or can be connected to the image processing + * block such as IPIPE (on DM355 only). + * + * Features supported + * - MMAP IO + * - Capture using TVP5146 over BT.656 + * - support for interfacing decoders using sub device model + * - Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV + * data capture to SDRAM. + * TODO list + * - Support multiple REQBUF after open + * - Support for de-allocating buffers through REQBUF + * - Support for Raw Bayer RGB capture + * - Support for chaining Image Processor + * - Support for static allocation of buffers + * - Support for USERPTR IO + * - Support for STREAMON before QBUF + * - Support for control ioctls + */ +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <media/v4l2-common.h> +#include <linux/io.h> +#include <media/davinci/vpfe_capture.h> +#include "ccdc_hw_device.h" + +static int debug; +static u32 numbuffers = 3; +static u32 bufsize = (720 * 576 * 2); + +module_param(numbuffers, uint, S_IRUGO); +module_param(bufsize, uint, S_IRUGO); +module_param(debug, int, 0644); + +MODULE_PARM_DESC(numbuffers, "buffer count (default:3)"); +MODULE_PARM_DESC(bufsize, "buffer size in bytes (default:720 x 576 x 2)"); +MODULE_PARM_DESC(debug, "Debug level 0-1"); + +MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments"); + +/* standard information */ +struct vpfe_standard { + v4l2_std_id std_id; + unsigned int width; + unsigned int height; + struct v4l2_fract pixelaspect; + /* 0 - progressive, 1 - interlaced */ + int frame_format; +}; + +/* ccdc configuration */ +struct ccdc_config { + /* This make sure vpfe is probed and ready to go */ + int vpfe_probed; + /* name of ccdc device */ + char name[32]; +}; + +/* data structures */ +static struct vpfe_config_params config_params = { + .min_numbuffers = 3, + .numbuffers = 3, + .min_bufsize = 720 * 480 * 2, + .device_bufsize = 720 * 576 * 2, +}; + +/* ccdc device registered */ +static const struct ccdc_hw_device *ccdc_dev; +/* lock for accessing ccdc information */ +static DEFINE_MUTEX(ccdc_lock); +/* ccdc configuration */ +static struct ccdc_config *ccdc_cfg; + +static const struct vpfe_standard vpfe_standards[] = { + {V4L2_STD_525_60, 720, 480, {11, 10}, 1}, + {V4L2_STD_625_50, 720, 576, {54, 59}, 1}, +}; + +/* Used when raw Bayer image from ccdc is directly captured to SDRAM */ +static const struct vpfe_pixel_format vpfe_pix_fmts[] = { + { + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .bpp = 1, + }, + { + .pixelformat = V4L2_PIX_FMT_SBGGR16, + .bpp = 2, + }, + { + .pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8, + .bpp = 1, + }, + { + .pixelformat = V4L2_PIX_FMT_UYVY, + .bpp = 2, + }, + { + .pixelformat = V4L2_PIX_FMT_YUYV, + .bpp = 2, + }, + { + .pixelformat = V4L2_PIX_FMT_NV12, + .bpp = 1, + }, +}; + +/* + * vpfe_lookup_pix_format() + * lookup an entry in the vpfe pix format table based on pix_format + */ +static const struct vpfe_pixel_format *vpfe_lookup_pix_format(u32 pix_format) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(vpfe_pix_fmts); i++) { + if (pix_format == vpfe_pix_fmts[i].pixelformat) + return &vpfe_pix_fmts[i]; + } + return NULL; +} + +/* + * vpfe_register_ccdc_device. CCDC module calls this to + * register with vpfe capture + */ +int vpfe_register_ccdc_device(const struct ccdc_hw_device *dev) +{ + int ret = 0; + printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name); + + if (!dev->hw_ops.open || + !dev->hw_ops.enable || + !dev->hw_ops.set_hw_if_params || + !dev->hw_ops.configure || + !dev->hw_ops.set_buftype || + !dev->hw_ops.get_buftype || + !dev->hw_ops.enum_pix || + !dev->hw_ops.set_frame_format || + !dev->hw_ops.get_frame_format || + !dev->hw_ops.get_pixel_format || + !dev->hw_ops.set_pixel_format || + !dev->hw_ops.set_image_window || + !dev->hw_ops.get_image_window || + !dev->hw_ops.get_line_length || + !dev->hw_ops.getfid) + return -EINVAL; + + mutex_lock(&ccdc_lock); + if (!ccdc_cfg) { + /* + * TODO. Will this ever happen? if so, we need to fix it. + * Probably we need to add the request to a linked list and + * walk through it during vpfe probe + */ + printk(KERN_ERR "vpfe capture not initialized\n"); + ret = -EFAULT; + goto unlock; + } + + if (strcmp(dev->name, ccdc_cfg->name)) { + /* ignore this ccdc */ + ret = -EINVAL; + goto unlock; + } + + if (ccdc_dev) { + printk(KERN_ERR "ccdc already registered\n"); + ret = -EINVAL; + goto unlock; + } + + ccdc_dev = dev; +unlock: + mutex_unlock(&ccdc_lock); + return ret; +} +EXPORT_SYMBOL(vpfe_register_ccdc_device); + +/* + * vpfe_unregister_ccdc_device. CCDC module calls this to + * unregister with vpfe capture + */ +void vpfe_unregister_ccdc_device(const struct ccdc_hw_device *dev) +{ + if (!dev) { + printk(KERN_ERR "invalid ccdc device ptr\n"); + return; + } + + printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n", + dev->name); + + if (strcmp(dev->name, ccdc_cfg->name)) { + /* ignore this ccdc */ + return; + } + + mutex_lock(&ccdc_lock); + ccdc_dev = NULL; + mutex_unlock(&ccdc_lock); +} +EXPORT_SYMBOL(vpfe_unregister_ccdc_device); + +/* + * vpfe_config_ccdc_image_format() + * For a pix format, configure ccdc to setup the capture + */ +static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev) +{ + enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED; + int ret = 0; + + if (ccdc_dev->hw_ops.set_pixel_format( + vpfe_dev->fmt.fmt.pix.pixelformat) < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "couldn't set pix format in ccdc\n"); + return -EINVAL; + } + /* configure the image window */ + ccdc_dev->hw_ops.set_image_window(&vpfe_dev->crop); + + switch (vpfe_dev->fmt.fmt.pix.field) { + case V4L2_FIELD_INTERLACED: + /* do nothing, since it is default */ + ret = ccdc_dev->hw_ops.set_buftype( + CCDC_BUFTYPE_FLD_INTERLEAVED); + break; + case V4L2_FIELD_NONE: + frm_fmt = CCDC_FRMFMT_PROGRESSIVE; + /* buffer type only applicable for interlaced scan */ + break; + case V4L2_FIELD_SEQ_TB: + ret = ccdc_dev->hw_ops.set_buftype( + CCDC_BUFTYPE_FLD_SEPARATED); + break; + default: + return -EINVAL; + } + + /* set the frame format */ + if (!ret) + ret = ccdc_dev->hw_ops.set_frame_format(frm_fmt); + return ret; +} +/* + * vpfe_config_image_format() + * For a given standard, this functions sets up the default + * pix format & crop values in the vpfe device and ccdc. It first + * starts with defaults based values from the standard table. + * It then checks if sub device supports get_fmt and then override the + * values based on that.Sets crop values to match with scan resolution + * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the + * values in ccdc + */ +static int vpfe_config_image_format(struct vpfe_device *vpfe_dev, + v4l2_std_id std_id) +{ + struct vpfe_subdev_info *sdinfo = vpfe_dev->current_subdev; + struct v4l2_subdev_format fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mbus_fmt = &fmt.format; + struct v4l2_pix_format *pix = &vpfe_dev->fmt.fmt.pix; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) { + if (vpfe_standards[i].std_id & std_id) { + vpfe_dev->std_info.active_pixels = + vpfe_standards[i].width; + vpfe_dev->std_info.active_lines = + vpfe_standards[i].height; + vpfe_dev->std_info.frame_format = + vpfe_standards[i].frame_format; + vpfe_dev->std_index = i; + break; + } + } + + if (i == ARRAY_SIZE(vpfe_standards)) { + v4l2_err(&vpfe_dev->v4l2_dev, "standard not supported\n"); + return -EINVAL; + } + + vpfe_dev->crop.top = 0; + vpfe_dev->crop.left = 0; + vpfe_dev->crop.width = vpfe_dev->std_info.active_pixels; + vpfe_dev->crop.height = vpfe_dev->std_info.active_lines; + pix->width = vpfe_dev->crop.width; + pix->height = vpfe_dev->crop.height; + + /* first field and frame format based on standard frame format */ + if (vpfe_dev->std_info.frame_format) { + pix->field = V4L2_FIELD_INTERLACED; + /* assume V4L2_PIX_FMT_UYVY as default */ + pix->pixelformat = V4L2_PIX_FMT_UYVY; + v4l2_fill_mbus_format(mbus_fmt, pix, + MEDIA_BUS_FMT_YUYV10_2X10); + } else { + pix->field = V4L2_FIELD_NONE; + /* assume V4L2_PIX_FMT_SBGGR8 */ + pix->pixelformat = V4L2_PIX_FMT_SBGGR8; + v4l2_fill_mbus_format(mbus_fmt, pix, + MEDIA_BUS_FMT_SBGGR8_1X8); + } + + /* if sub device supports get_fmt, override the defaults */ + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, + sdinfo->grp_id, pad, get_fmt, NULL, &fmt); + + if (ret && ret != -ENOIOCTLCMD) { + v4l2_err(&vpfe_dev->v4l2_dev, + "error in getting get_fmt from sub device\n"); + return ret; + } + v4l2_fill_pix_format(pix, mbus_fmt); + pix->bytesperline = pix->width * 2; + pix->sizeimage = pix->bytesperline * pix->height; + + /* Sets the values in CCDC */ + ret = vpfe_config_ccdc_image_format(vpfe_dev); + if (ret) + return ret; + + /* Update the values of sizeimage and bytesperline */ + pix->bytesperline = ccdc_dev->hw_ops.get_line_length(); + pix->sizeimage = pix->bytesperline * pix->height; + + return 0; +} + +static int vpfe_initialize_device(struct vpfe_device *vpfe_dev) +{ + int ret; + + /* set first input of current subdevice as the current input */ + vpfe_dev->current_input = 0; + + /* set default standard */ + vpfe_dev->std_index = 0; + + /* Configure the default format information */ + ret = vpfe_config_image_format(vpfe_dev, + vpfe_standards[vpfe_dev->std_index].std_id); + if (ret) + return ret; + + /* now open the ccdc device to initialize it */ + mutex_lock(&ccdc_lock); + if (!ccdc_dev) { + v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n"); + ret = -ENODEV; + goto unlock; + } + + if (!try_module_get(ccdc_dev->owner)) { + v4l2_err(&vpfe_dev->v4l2_dev, "Couldn't lock ccdc module\n"); + ret = -ENODEV; + goto unlock; + } + ret = ccdc_dev->hw_ops.open(vpfe_dev->pdev); + if (!ret) + vpfe_dev->initialized = 1; + + /* Clear all VPFE/CCDC interrupts */ + if (vpfe_dev->cfg->clr_intr) + vpfe_dev->cfg->clr_intr(-1); + +unlock: + mutex_unlock(&ccdc_lock); + return ret; +} + +/* + * vpfe_open : It creates object of file handle structure and + * stores it in private_data member of filepointer + */ +static int vpfe_open(struct file *file) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct video_device *vdev = video_devdata(file); + struct vpfe_fh *fh; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_open\n"); + + if (!vpfe_dev->cfg->num_subdevs) { + v4l2_err(&vpfe_dev->v4l2_dev, "No decoder registered\n"); + return -ENODEV; + } + + /* Allocate memory for the file handle object */ + fh = kmalloc(sizeof(*fh), GFP_KERNEL); + if (!fh) + return -ENOMEM; + + /* store pointer to fh in private_data member of file */ + file->private_data = fh; + fh->vpfe_dev = vpfe_dev; + v4l2_fh_init(&fh->fh, vdev); + mutex_lock(&vpfe_dev->lock); + /* If decoder is not initialized. initialize it */ + if (!vpfe_dev->initialized) { + if (vpfe_initialize_device(vpfe_dev)) { + mutex_unlock(&vpfe_dev->lock); + v4l2_fh_exit(&fh->fh); + kfree(fh); + return -ENODEV; + } + } + /* Increment device usrs counter */ + vpfe_dev->usrs++; + /* Set io_allowed member to false */ + fh->io_allowed = 0; + v4l2_fh_add(&fh->fh); + mutex_unlock(&vpfe_dev->lock); + return 0; +} + +static void vpfe_schedule_next_buffer(struct vpfe_device *vpfe_dev) +{ + unsigned long addr; + + vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next, + struct videobuf_buffer, queue); + list_del(&vpfe_dev->next_frm->queue); + vpfe_dev->next_frm->state = VIDEOBUF_ACTIVE; + addr = videobuf_to_dma_contig(vpfe_dev->next_frm); + + ccdc_dev->hw_ops.setfbaddr(addr); +} + +static void vpfe_schedule_bottom_field(struct vpfe_device *vpfe_dev) +{ + unsigned long addr; + + addr = videobuf_to_dma_contig(vpfe_dev->cur_frm); + addr += vpfe_dev->field_off; + ccdc_dev->hw_ops.setfbaddr(addr); +} + +static void vpfe_process_buffer_complete(struct vpfe_device *vpfe_dev) +{ + vpfe_dev->cur_frm->ts = ktime_get_ns(); + vpfe_dev->cur_frm->state = VIDEOBUF_DONE; + vpfe_dev->cur_frm->size = vpfe_dev->fmt.fmt.pix.sizeimage; + wake_up_interruptible(&vpfe_dev->cur_frm->done); + vpfe_dev->cur_frm = vpfe_dev->next_frm; +} + +/* ISR for VINT0*/ +static irqreturn_t vpfe_isr(int irq, void *dev_id) +{ + struct vpfe_device *vpfe_dev = dev_id; + enum v4l2_field field; + int fid; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nStarting vpfe_isr...\n"); + field = vpfe_dev->fmt.fmt.pix.field; + + /* if streaming not started, don't do anything */ + if (!vpfe_dev->started) + goto clear_intr; + + /* only for 6446 this will be applicable */ + if (ccdc_dev->hw_ops.reset) + ccdc_dev->hw_ops.reset(); + + if (field == V4L2_FIELD_NONE) { + /* handle progressive frame capture */ + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "frame format is progressive...\n"); + if (vpfe_dev->cur_frm != vpfe_dev->next_frm) + vpfe_process_buffer_complete(vpfe_dev); + goto clear_intr; + } + + /* interlaced or TB capture check which field we are in hardware */ + fid = ccdc_dev->hw_ops.getfid(); + + /* switch the software maintained field id */ + vpfe_dev->field_id ^= 1; + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "field id = %x:%x.\n", + fid, vpfe_dev->field_id); + if (fid == vpfe_dev->field_id) { + /* we are in-sync here,continue */ + if (fid == 0) { + /* + * One frame is just being captured. If the next frame + * is available, release the current frame and move on + */ + if (vpfe_dev->cur_frm != vpfe_dev->next_frm) + vpfe_process_buffer_complete(vpfe_dev); + /* + * based on whether the two fields are stored + * interleavely or separately in memory, reconfigure + * the CCDC memory address + */ + if (field == V4L2_FIELD_SEQ_TB) + vpfe_schedule_bottom_field(vpfe_dev); + goto clear_intr; + } + /* + * if one field is just being captured configure + * the next frame get the next frame from the empty + * queue if no frame is available hold on to the + * current buffer + */ + spin_lock(&vpfe_dev->dma_queue_lock); + if (!list_empty(&vpfe_dev->dma_queue) && + vpfe_dev->cur_frm == vpfe_dev->next_frm) + vpfe_schedule_next_buffer(vpfe_dev); + spin_unlock(&vpfe_dev->dma_queue_lock); + } else if (fid == 0) { + /* + * out of sync. Recover from any hardware out-of-sync. + * May loose one frame + */ + vpfe_dev->field_id = fid; + } +clear_intr: + if (vpfe_dev->cfg->clr_intr) + vpfe_dev->cfg->clr_intr(irq); + + return IRQ_HANDLED; +} + +/* vdint1_isr - isr handler for VINT1 interrupt */ +static irqreturn_t vdint1_isr(int irq, void *dev_id) +{ + struct vpfe_device *vpfe_dev = dev_id; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nInside vdint1_isr...\n"); + + /* if streaming not started, don't do anything */ + if (!vpfe_dev->started) { + if (vpfe_dev->cfg->clr_intr) + vpfe_dev->cfg->clr_intr(irq); + return IRQ_HANDLED; + } + + spin_lock(&vpfe_dev->dma_queue_lock); + if ((vpfe_dev->fmt.fmt.pix.field == V4L2_FIELD_NONE) && + !list_empty(&vpfe_dev->dma_queue) && + vpfe_dev->cur_frm == vpfe_dev->next_frm) + vpfe_schedule_next_buffer(vpfe_dev); + spin_unlock(&vpfe_dev->dma_queue_lock); + + if (vpfe_dev->cfg->clr_intr) + vpfe_dev->cfg->clr_intr(irq); + + return IRQ_HANDLED; +} + +static void vpfe_detach_irq(struct vpfe_device *vpfe_dev) +{ + enum ccdc_frmfmt frame_format; + + frame_format = ccdc_dev->hw_ops.get_frame_format(); + if (frame_format == CCDC_FRMFMT_PROGRESSIVE) + free_irq(vpfe_dev->ccdc_irq1, vpfe_dev); +} + +static int vpfe_attach_irq(struct vpfe_device *vpfe_dev) +{ + enum ccdc_frmfmt frame_format; + + frame_format = ccdc_dev->hw_ops.get_frame_format(); + if (frame_format == CCDC_FRMFMT_PROGRESSIVE) { + return request_irq(vpfe_dev->ccdc_irq1, vdint1_isr, + 0, "vpfe_capture1", + vpfe_dev); + } + return 0; +} + +/* vpfe_stop_ccdc_capture: stop streaming in ccdc/isif */ +static void vpfe_stop_ccdc_capture(struct vpfe_device *vpfe_dev) +{ + vpfe_dev->started = 0; + ccdc_dev->hw_ops.enable(0); + if (ccdc_dev->hw_ops.enable_out_to_sdram) + ccdc_dev->hw_ops.enable_out_to_sdram(0); +} + +/* + * vpfe_release : This function deletes buffer queue, frees the + * buffers and the vpfe file handle + */ +static int vpfe_release(struct file *file) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + struct vpfe_subdev_info *sdinfo; + int ret; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n"); + + /* Get the device lock */ + mutex_lock(&vpfe_dev->lock); + /* if this instance is doing IO */ + if (fh->io_allowed) { + if (vpfe_dev->started) { + sdinfo = vpfe_dev->current_subdev; + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, + sdinfo->grp_id, + video, s_stream, 0); + if (ret && (ret != -ENOIOCTLCMD)) + v4l2_err(&vpfe_dev->v4l2_dev, + "stream off failed in subdev\n"); + vpfe_stop_ccdc_capture(vpfe_dev); + vpfe_detach_irq(vpfe_dev); + videobuf_streamoff(&vpfe_dev->buffer_queue); + } + vpfe_dev->io_usrs = 0; + vpfe_dev->numbuffers = config_params.numbuffers; + videobuf_stop(&vpfe_dev->buffer_queue); + videobuf_mmap_free(&vpfe_dev->buffer_queue); + } + + /* Decrement device usrs counter */ + vpfe_dev->usrs--; + v4l2_fh_del(&fh->fh); + v4l2_fh_exit(&fh->fh); + /* If this is the last file handle */ + if (!vpfe_dev->usrs) { + vpfe_dev->initialized = 0; + if (ccdc_dev->hw_ops.close) + ccdc_dev->hw_ops.close(vpfe_dev->pdev); + module_put(ccdc_dev->owner); + } + mutex_unlock(&vpfe_dev->lock); + file->private_data = NULL; + /* Free memory allocated to file handle object */ + kfree(fh); + return 0; +} + +/* + * vpfe_mmap : It is used to map kernel space buffers + * into user spaces + */ +static int vpfe_mmap(struct file *file, struct vm_area_struct *vma) +{ + /* Get the device object and file handle object */ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n"); + + return videobuf_mmap_mapper(&vpfe_dev->buffer_queue, vma); +} + +/* + * vpfe_poll: It is used for select/poll system call + */ +static __poll_t vpfe_poll(struct file *file, poll_table *wait) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n"); + + if (vpfe_dev->started) + return videobuf_poll_stream(file, + &vpfe_dev->buffer_queue, wait); + return 0; +} + +/* vpfe capture driver file operations */ +static const struct v4l2_file_operations vpfe_fops = { + .owner = THIS_MODULE, + .open = vpfe_open, + .release = vpfe_release, + .unlocked_ioctl = video_ioctl2, + .mmap = vpfe_mmap, + .poll = vpfe_poll +}; + +/* + * vpfe_check_format() + * This function adjust the input pixel format as per hardware + * capabilities and update the same in pixfmt. + * Following algorithm used :- + * + * If given pixformat is not in the vpfe list of pix formats or not + * supported by the hardware, current value of pixformat in the device + * is used + * If given field is not supported, then current field is used. If field + * is different from current, then it is matched with that from sub device. + * Minimum height is 2 lines for interlaced or tb field and 1 line for + * progressive. Maximum height is clamped to active active lines of scan + * Minimum width is 32 bytes in memory and width is clamped to active + * pixels of scan. + * bytesperline is a multiple of 32. + */ +static const struct vpfe_pixel_format * + vpfe_check_format(struct vpfe_device *vpfe_dev, + struct v4l2_pix_format *pixfmt) +{ + u32 min_height = 1, min_width = 32, max_width, max_height; + const struct vpfe_pixel_format *vpfe_pix_fmt; + u32 pix; + int temp, found; + + vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); + if (!vpfe_pix_fmt) { + /* + * use current pixel format in the vpfe device. We + * will find this pix format in the table + */ + pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; + vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); + } + + /* check if hw supports it */ + temp = 0; + found = 0; + while (ccdc_dev->hw_ops.enum_pix(&pix, temp) >= 0) { + if (vpfe_pix_fmt->pixelformat == pix) { + found = 1; + break; + } + temp++; + } + + if (!found) { + /* use current pixel format */ + pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; + /* + * Since this is currently used in the vpfe device, we + * will find this pix format in the table + */ + vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); + } + + /* check what field format is supported */ + if (pixfmt->field == V4L2_FIELD_ANY) { + /* if field is any, use current value as default */ + pixfmt->field = vpfe_dev->fmt.fmt.pix.field; + } + + /* + * if field is not same as current field in the vpfe device + * try matching the field with the sub device field + */ + if (vpfe_dev->fmt.fmt.pix.field != pixfmt->field) { + /* + * If field value is not in the supported fields, use current + * field used in the device as default + */ + switch (pixfmt->field) { + case V4L2_FIELD_INTERLACED: + case V4L2_FIELD_SEQ_TB: + /* if sub device is supporting progressive, use that */ + if (!vpfe_dev->std_info.frame_format) + pixfmt->field = V4L2_FIELD_NONE; + break; + case V4L2_FIELD_NONE: + if (vpfe_dev->std_info.frame_format) + pixfmt->field = V4L2_FIELD_INTERLACED; + break; + + default: + /* use current field as default */ + pixfmt->field = vpfe_dev->fmt.fmt.pix.field; + break; + } + } + + /* Now adjust image resolutions supported */ + if (pixfmt->field == V4L2_FIELD_INTERLACED || + pixfmt->field == V4L2_FIELD_SEQ_TB) + min_height = 2; + + max_width = vpfe_dev->std_info.active_pixels; + max_height = vpfe_dev->std_info.active_lines; + min_width /= vpfe_pix_fmt->bpp; + + v4l2_info(&vpfe_dev->v4l2_dev, "width = %d, height = %d, bpp = %d\n", + pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp); + + pixfmt->width = clamp((pixfmt->width), min_width, max_width); + pixfmt->height = clamp((pixfmt->height), min_height, max_height); + + /* If interlaced, adjust height to be a multiple of 2 */ + if (pixfmt->field == V4L2_FIELD_INTERLACED) + pixfmt->height &= (~1); + /* + * recalculate bytesperline and sizeimage since width + * and height might have changed + */ + pixfmt->bytesperline = (((pixfmt->width * vpfe_pix_fmt->bpp) + 31) + & ~31); + if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) + pixfmt->sizeimage = + pixfmt->bytesperline * pixfmt->height + + ((pixfmt->bytesperline * pixfmt->height) >> 1); + else + pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; + + v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height = %d, bpp = %d, bytesperline = %d, sizeimage = %d\n", + pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp, + pixfmt->bytesperline, pixfmt->sizeimage); + return vpfe_pix_fmt; +} + +static int vpfe_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n"); + + strscpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver)); + strscpy(cap->bus_info, "VPFE", sizeof(cap->bus_info)); + strscpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card)); + return 0; +} + +static int vpfe_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt_vid_cap\n"); + /* Fill in the information about format */ + *fmt = vpfe_dev->fmt; + return 0; +} + +static int vpfe_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + const struct vpfe_pixel_format *pix_fmt; + u32 pix; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt_vid_cap\n"); + + if (ccdc_dev->hw_ops.enum_pix(&pix, fmt->index) < 0) + return -EINVAL; + + /* Fill in the information about format */ + pix_fmt = vpfe_lookup_pix_format(pix); + if (pix_fmt) { + fmt->pixelformat = pix_fmt->pixelformat; + return 0; + } + return -EINVAL; +} + +static int vpfe_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + const struct vpfe_pixel_format *pix_fmts; + int ret; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n"); + + /* If streaming is started, return error */ + if (vpfe_dev->started) { + v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n"); + return -EBUSY; + } + + /* Check for valid frame format */ + pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix); + if (!pix_fmts) + return -EINVAL; + + /* store the pixel format in the device object */ + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + /* First detach any IRQ if currently attached */ + vpfe_detach_irq(vpfe_dev); + vpfe_dev->fmt = *fmt; + /* set image capture parameters in the ccdc */ + ret = vpfe_config_ccdc_image_format(vpfe_dev); + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + const struct vpfe_pixel_format *pix_fmts; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n"); + + pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix); + if (!pix_fmts) + return -EINVAL; + return 0; +} + +/* + * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a + * given app input index + */ +static int vpfe_get_subdev_input_index(struct vpfe_device *vpfe_dev, + int *subdev_index, + int *subdev_input_index, + int app_input_index) +{ + struct vpfe_config *cfg = vpfe_dev->cfg; + struct vpfe_subdev_info *sdinfo; + int i, j = 0; + + for (i = 0; i < cfg->num_subdevs; i++) { + sdinfo = &cfg->sub_devs[i]; + if (app_input_index < (j + sdinfo->num_inputs)) { + *subdev_index = i; + *subdev_input_index = app_input_index - j; + return 0; + } + j += sdinfo->num_inputs; + } + return -EINVAL; +} + +/* + * vpfe_get_app_input - Get app input index for a given subdev input index + * driver stores the input index of the current sub device and translate it + * when application request the current input + */ +static int vpfe_get_app_input_index(struct vpfe_device *vpfe_dev, + int *app_input_index) +{ + struct vpfe_config *cfg = vpfe_dev->cfg; + struct vpfe_subdev_info *sdinfo; + int i, j = 0; + + for (i = 0; i < cfg->num_subdevs; i++) { + sdinfo = &cfg->sub_devs[i]; + if (!strcmp(sdinfo->name, vpfe_dev->current_subdev->name)) { + if (vpfe_dev->current_input >= sdinfo->num_inputs) + return -1; + *app_input_index = j + vpfe_dev->current_input; + return 0; + } + j += sdinfo->num_inputs; + } + return -EINVAL; +} + +static int vpfe_enum_input(struct file *file, void *priv, + struct v4l2_input *inp) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int subdev, index ; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n"); + + if (vpfe_get_subdev_input_index(vpfe_dev, + &subdev, + &index, + inp->index) < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, "input information not found for the subdev\n"); + return -EINVAL; + } + sdinfo = &vpfe_dev->cfg->sub_devs[subdev]; + *inp = sdinfo->inputs[index]; + return 0; +} + +static int vpfe_g_input(struct file *file, void *priv, unsigned int *index) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n"); + + return vpfe_get_app_input_index(vpfe_dev, index); +} + + +static int vpfe_s_input(struct file *file, void *priv, unsigned int index) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct v4l2_subdev *sd; + struct vpfe_subdev_info *sdinfo; + int subdev_index, inp_index; + struct vpfe_route *route; + u32 input, output; + int ret; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n"); + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + /* + * If streaming is started return device busy + * error + */ + if (vpfe_dev->started) { + v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is on\n"); + ret = -EBUSY; + goto unlock_out; + } + ret = vpfe_get_subdev_input_index(vpfe_dev, + &subdev_index, + &inp_index, + index); + if (ret < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, "invalid input index\n"); + goto unlock_out; + } + + sdinfo = &vpfe_dev->cfg->sub_devs[subdev_index]; + sd = vpfe_dev->sd[subdev_index]; + route = &sdinfo->routes[inp_index]; + if (route && sdinfo->can_route) { + input = route->input; + output = route->output; + } else { + input = 0; + output = 0; + } + + if (sd) + ret = v4l2_subdev_call(sd, video, s_routing, input, output, 0); + + if (ret) { + v4l2_err(&vpfe_dev->v4l2_dev, + "vpfe_doioctl:error in setting input in decoder\n"); + ret = -EINVAL; + goto unlock_out; + } + vpfe_dev->current_subdev = sdinfo; + if (sd) + vpfe_dev->v4l2_dev.ctrl_handler = sd->ctrl_handler; + vpfe_dev->current_input = index; + vpfe_dev->std_index = 0; + + /* set the bus/interface parameter for the sub device in ccdc */ + ret = ccdc_dev->hw_ops.set_hw_if_params(&sdinfo->ccdc_if_params); + if (ret) + goto unlock_out; + + /* set the default image parameters in the device */ + ret = vpfe_config_image_format(vpfe_dev, + vpfe_standards[vpfe_dev->std_index].std_id); +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int ret; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n"); + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + sdinfo = vpfe_dev->current_subdev; + if (ret) + return ret; + /* Call querystd function of decoder device */ + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + video, querystd, std_id); + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int ret; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n"); + + /* Call decoder driver function to set the standard */ + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + sdinfo = vpfe_dev->current_subdev; + /* If streaming is started, return device busy error */ + if (vpfe_dev->started) { + v4l2_err(&vpfe_dev->v4l2_dev, "streaming is started\n"); + ret = -EBUSY; + goto unlock_out; + } + + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + video, s_std, std_id); + if (ret < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n"); + goto unlock_out; + } + ret = vpfe_config_image_format(vpfe_dev, std_id); + +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_std\n"); + + *std_id = vpfe_standards[vpfe_dev->std_index].std_id; + return 0; +} +/* + * Videobuf operations + */ +static int vpfe_videobuf_setup(struct videobuf_queue *vq, + unsigned int *count, + unsigned int *size) +{ + struct vpfe_fh *fh = vq->priv_data; + struct vpfe_device *vpfe_dev = fh->vpfe_dev; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_setup\n"); + *size = vpfe_dev->fmt.fmt.pix.sizeimage; + if (vpfe_dev->memory == V4L2_MEMORY_MMAP && + vpfe_dev->fmt.fmt.pix.sizeimage > config_params.device_bufsize) + *size = config_params.device_bufsize; + + if (*count < config_params.min_numbuffers) + *count = config_params.min_numbuffers; + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "count=%d, size=%d\n", *count, *size); + return 0; +} + +static int vpfe_videobuf_prepare(struct videobuf_queue *vq, + struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct vpfe_fh *fh = vq->priv_data; + struct vpfe_device *vpfe_dev = fh->vpfe_dev; + unsigned long addr; + int ret; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_prepare\n"); + + /* If buffer is not initialized, initialize it */ + if (VIDEOBUF_NEEDS_INIT == vb->state) { + vb->width = vpfe_dev->fmt.fmt.pix.width; + vb->height = vpfe_dev->fmt.fmt.pix.height; + vb->size = vpfe_dev->fmt.fmt.pix.sizeimage; + vb->field = field; + + ret = videobuf_iolock(vq, vb, NULL); + if (ret < 0) + return ret; + + addr = videobuf_to_dma_contig(vb); + /* Make sure user addresses are aligned to 32 bytes */ + if (!ALIGN(addr, 32)) + return -EINVAL; + + vb->state = VIDEOBUF_PREPARED; + } + return 0; +} + +static void vpfe_videobuf_queue(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + /* Get the file handle object and device object */ + struct vpfe_fh *fh = vq->priv_data; + struct vpfe_device *vpfe_dev = fh->vpfe_dev; + unsigned long flags; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_queue\n"); + + /* add the buffer to the DMA queue */ + spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags); + list_add_tail(&vb->queue, &vpfe_dev->dma_queue); + spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags); + + /* Change state of the buffer */ + vb->state = VIDEOBUF_QUEUED; +} + +static void vpfe_videobuf_release(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + struct vpfe_fh *fh = vq->priv_data; + struct vpfe_device *vpfe_dev = fh->vpfe_dev; + unsigned long flags; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_videobuf_release\n"); + + /* + * We need to flush the buffer from the dma queue since + * they are de-allocated + */ + spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags); + INIT_LIST_HEAD(&vpfe_dev->dma_queue); + spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags); + videobuf_dma_contig_free(vq, vb); + vb->state = VIDEOBUF_NEEDS_INIT; +} + +static const struct videobuf_queue_ops vpfe_videobuf_qops = { + .buf_setup = vpfe_videobuf_setup, + .buf_prepare = vpfe_videobuf_prepare, + .buf_queue = vpfe_videobuf_queue, + .buf_release = vpfe_videobuf_release, +}; + +/* + * vpfe_reqbufs. currently support REQBUF only once opening + * the device. + */ +static int vpfe_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *req_buf) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + int ret; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != req_buf->type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + if (vpfe_dev->io_usrs != 0) { + v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n"); + ret = -EBUSY; + goto unlock_out; + } + + vpfe_dev->memory = req_buf->memory; + videobuf_queue_dma_contig_init(&vpfe_dev->buffer_queue, + &vpfe_videobuf_qops, + vpfe_dev->pdev, + &vpfe_dev->irqlock, + req_buf->type, + vpfe_dev->fmt.fmt.pix.field, + sizeof(struct videobuf_buffer), + fh, NULL); + + fh->io_allowed = 1; + vpfe_dev->io_usrs = 1; + INIT_LIST_HEAD(&vpfe_dev->dma_queue); + ret = videobuf_reqbufs(&vpfe_dev->buffer_queue, req_buf); +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querybuf\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + if (vpfe_dev->memory != V4L2_MEMORY_MMAP) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid memory\n"); + return -EINVAL; + } + /* Call videobuf_querybuf to get information */ + return videobuf_querybuf(&vpfe_dev->buffer_queue, buf); +} + +static int vpfe_qbuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_qbuf\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != p->type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + /* + * If this file handle is not allowed to do IO, + * return error + */ + if (!fh->io_allowed) { + v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); + return -EACCES; + } + return videobuf_qbuf(&vpfe_dev->buffer_queue, p); +} + +static int vpfe_dqbuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_dqbuf\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + return videobuf_dqbuf(&vpfe_dev->buffer_queue, + buf, file->f_flags & O_NONBLOCK); +} + +/* + * vpfe_calculate_offsets : This function calculates buffers offset + * for top and bottom field + */ +static void vpfe_calculate_offsets(struct vpfe_device *vpfe_dev) +{ + struct v4l2_rect image_win; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_calculate_offsets\n"); + + ccdc_dev->hw_ops.get_image_window(&image_win); + vpfe_dev->field_off = image_win.height * image_win.width; +} + +/* vpfe_start_ccdc_capture: start streaming in ccdc/isif */ +static void vpfe_start_ccdc_capture(struct vpfe_device *vpfe_dev) +{ + ccdc_dev->hw_ops.enable(1); + if (ccdc_dev->hw_ops.enable_out_to_sdram) + ccdc_dev->hw_ops.enable_out_to_sdram(1); + vpfe_dev->started = 1; +} + +/* + * vpfe_streamon. Assume the DMA queue is not empty. + * application is expected to call QBUF before calling + * this ioctl. If not, driver returns error + */ +static int vpfe_streamon(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + struct vpfe_subdev_info *sdinfo; + unsigned long addr; + int ret; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + /* If file handle is not allowed IO, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); + return -EACCES; + } + + sdinfo = vpfe_dev->current_subdev; + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + video, s_stream, 1); + + if (ret && (ret != -ENOIOCTLCMD)) { + v4l2_err(&vpfe_dev->v4l2_dev, "stream on failed in subdev\n"); + return -EINVAL; + } + + /* If buffer queue is empty, return error */ + if (list_empty(&vpfe_dev->buffer_queue.stream)) { + v4l2_err(&vpfe_dev->v4l2_dev, "buffer queue is empty\n"); + return -EIO; + } + + /* Call videobuf_streamon to start streaming * in videobuf */ + ret = videobuf_streamon(&vpfe_dev->buffer_queue); + if (ret) + return ret; + + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + goto streamoff; + /* Get the next frame from the buffer queue */ + vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next, + struct videobuf_buffer, queue); + vpfe_dev->cur_frm = vpfe_dev->next_frm; + /* Remove buffer from the buffer queue */ + list_del(&vpfe_dev->cur_frm->queue); + /* Mark state of the current frame to active */ + vpfe_dev->cur_frm->state = VIDEOBUF_ACTIVE; + /* Initialize field_id and started member */ + vpfe_dev->field_id = 0; + addr = videobuf_to_dma_contig(vpfe_dev->cur_frm); + + /* Calculate field offset */ + vpfe_calculate_offsets(vpfe_dev); + + if (vpfe_attach_irq(vpfe_dev) < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "Error in attaching interrupt handle\n"); + ret = -EFAULT; + goto unlock_out; + } + if (ccdc_dev->hw_ops.configure() < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "Error in configuring ccdc\n"); + ret = -EINVAL; + goto unlock_out; + } + ccdc_dev->hw_ops.setfbaddr((unsigned long)(addr)); + vpfe_start_ccdc_capture(vpfe_dev); + mutex_unlock(&vpfe_dev->lock); + return ret; +unlock_out: + mutex_unlock(&vpfe_dev->lock); +streamoff: + videobuf_streamoff(&vpfe_dev->buffer_queue); + return ret; +} + +static int vpfe_streamoff(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + struct vpfe_subdev_info *sdinfo; + int ret; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + /* If io is allowed for this file handle, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); + return -EACCES; + } + + /* If streaming is not started, return error */ + if (!vpfe_dev->started) { + v4l2_err(&vpfe_dev->v4l2_dev, "device started\n"); + return -EINVAL; + } + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + vpfe_stop_ccdc_capture(vpfe_dev); + vpfe_detach_irq(vpfe_dev); + + sdinfo = vpfe_dev->current_subdev; + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + video, s_stream, 0); + + if (ret && (ret != -ENOIOCTLCMD)) + v4l2_err(&vpfe_dev->v4l2_dev, "stream off failed in subdev\n"); + ret = videobuf_streamoff(&vpfe_dev->buffer_queue); + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_g_pixelaspect(struct file *file, void *priv, + int type, struct v4l2_fract *f) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_pixelaspect\n"); + + if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + /* If std_index is invalid, then just return (== 1:1 aspect) */ + if (vpfe_dev->std_index >= ARRAY_SIZE(vpfe_standards)) + return 0; + + *f = vpfe_standards[vpfe_dev->std_index].pixelaspect; + return 0; +} + +static int vpfe_g_selection(struct file *file, void *priv, + struct v4l2_selection *sel) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_selection\n"); + + if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + switch (sel->target) { + case V4L2_SEL_TGT_CROP: + sel->r = vpfe_dev->crop; + break; + case V4L2_SEL_TGT_CROP_DEFAULT: + case V4L2_SEL_TGT_CROP_BOUNDS: + sel->r.width = vpfe_standards[vpfe_dev->std_index].width; + sel->r.height = vpfe_standards[vpfe_dev->std_index].height; + break; + default: + return -EINVAL; + } + return 0; +} + +static int vpfe_s_selection(struct file *file, void *priv, + struct v4l2_selection *sel) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct v4l2_rect rect = sel->r; + int ret; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_selection\n"); + + if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + sel->target != V4L2_SEL_TGT_CROP) + return -EINVAL; + + if (vpfe_dev->started) { + /* make sure streaming is not started */ + v4l2_err(&vpfe_dev->v4l2_dev, + "Cannot change crop when streaming is ON\n"); + return -EBUSY; + } + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + if (rect.top < 0 || rect.left < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "doesn't support negative values for top & left\n"); + ret = -EINVAL; + goto unlock_out; + } + + /* adjust the width to 16 pixel boundary */ + rect.width = ((rect.width + 15) & ~0xf); + + /* make sure parameters are valid */ + if ((rect.left + rect.width > + vpfe_dev->std_info.active_pixels) || + (rect.top + rect.height > + vpfe_dev->std_info.active_lines)) { + v4l2_err(&vpfe_dev->v4l2_dev, "Error in S_SELECTION params\n"); + ret = -EINVAL; + goto unlock_out; + } + ccdc_dev->hw_ops.set_image_window(&rect); + vpfe_dev->fmt.fmt.pix.width = rect.width; + vpfe_dev->fmt.fmt.pix.height = rect.height; + vpfe_dev->fmt.fmt.pix.bytesperline = + ccdc_dev->hw_ops.get_line_length(); + vpfe_dev->fmt.fmt.pix.sizeimage = + vpfe_dev->fmt.fmt.pix.bytesperline * + vpfe_dev->fmt.fmt.pix.height; + vpfe_dev->crop = rect; + sel->r = rect; +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +/* vpfe capture ioctl operations */ +static const struct v4l2_ioctl_ops vpfe_ioctl_ops = { + .vidioc_querycap = vpfe_querycap, + .vidioc_g_fmt_vid_cap = vpfe_g_fmt_vid_cap, + .vidioc_enum_fmt_vid_cap = vpfe_enum_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vpfe_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vpfe_try_fmt_vid_cap, + .vidioc_enum_input = vpfe_enum_input, + .vidioc_g_input = vpfe_g_input, + .vidioc_s_input = vpfe_s_input, + .vidioc_querystd = vpfe_querystd, + .vidioc_s_std = vpfe_s_std, + .vidioc_g_std = vpfe_g_std, + .vidioc_reqbufs = vpfe_reqbufs, + .vidioc_querybuf = vpfe_querybuf, + .vidioc_qbuf = vpfe_qbuf, + .vidioc_dqbuf = vpfe_dqbuf, + .vidioc_streamon = vpfe_streamon, + .vidioc_streamoff = vpfe_streamoff, + .vidioc_g_pixelaspect = vpfe_g_pixelaspect, + .vidioc_g_selection = vpfe_g_selection, + .vidioc_s_selection = vpfe_s_selection, +}; + +static struct vpfe_device *vpfe_initialize(void) +{ + struct vpfe_device *vpfe_dev; + + /* Default number of buffers should be 3 */ + if ((numbuffers > 0) && + (numbuffers < config_params.min_numbuffers)) + numbuffers = config_params.min_numbuffers; + + /* + * Set buffer size to min buffers size if invalid buffer size is + * given + */ + if (bufsize < config_params.min_bufsize) + bufsize = config_params.min_bufsize; + + config_params.numbuffers = numbuffers; + + if (numbuffers) + config_params.device_bufsize = bufsize; + + /* Allocate memory for device objects */ + vpfe_dev = kzalloc(sizeof(*vpfe_dev), GFP_KERNEL); + + return vpfe_dev; +} + +/* + * vpfe_probe : This function creates device entries by register + * itself to the V4L2 driver and initializes fields of each + * device objects + */ +static int vpfe_probe(struct platform_device *pdev) +{ + struct vpfe_subdev_info *sdinfo; + struct vpfe_config *vpfe_cfg; + struct resource *res1; + struct vpfe_device *vpfe_dev; + struct i2c_adapter *i2c_adap; + struct video_device *vfd; + int ret, i, j; + int num_subdevs = 0; + + /* Get the pointer to the device object */ + vpfe_dev = vpfe_initialize(); + + if (!vpfe_dev) { + v4l2_err(pdev->dev.driver, + "Failed to allocate memory for vpfe_dev\n"); + return -ENOMEM; + } + + vpfe_dev->pdev = &pdev->dev; + + if (!pdev->dev.platform_data) { + v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n"); + ret = -ENODEV; + goto probe_free_dev_mem; + } + + vpfe_cfg = pdev->dev.platform_data; + vpfe_dev->cfg = vpfe_cfg; + if (!vpfe_cfg->ccdc || !vpfe_cfg->card_name || !vpfe_cfg->sub_devs) { + v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n"); + ret = -ENOENT; + goto probe_free_dev_mem; + } + + /* Allocate memory for ccdc configuration */ + ccdc_cfg = kmalloc(sizeof(*ccdc_cfg), GFP_KERNEL); + if (!ccdc_cfg) { + ret = -ENOMEM; + goto probe_free_dev_mem; + } + + mutex_lock(&ccdc_lock); + + strscpy(ccdc_cfg->name, vpfe_cfg->ccdc, sizeof(ccdc_cfg->name)); + /* Get VINT0 irq resource */ + res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res1) { + v4l2_err(pdev->dev.driver, + "Unable to get interrupt for VINT0\n"); + ret = -ENODEV; + goto probe_free_ccdc_cfg_mem; + } + vpfe_dev->ccdc_irq0 = res1->start; + + /* Get VINT1 irq resource */ + res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1); + if (!res1) { + v4l2_err(pdev->dev.driver, + "Unable to get interrupt for VINT1\n"); + ret = -ENODEV; + goto probe_free_ccdc_cfg_mem; + } + vpfe_dev->ccdc_irq1 = res1->start; + + ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, 0, + "vpfe_capture0", vpfe_dev); + + if (0 != ret) { + v4l2_err(pdev->dev.driver, "Unable to request interrupt\n"); + goto probe_free_ccdc_cfg_mem; + } + + vfd = &vpfe_dev->video_dev; + /* Initialize field of video device */ + vfd->release = video_device_release_empty; + vfd->fops = &vpfe_fops; + vfd->ioctl_ops = &vpfe_ioctl_ops; + vfd->tvnorms = 0; + vfd->v4l2_dev = &vpfe_dev->v4l2_dev; + vfd->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + snprintf(vfd->name, sizeof(vfd->name), + "%s_V%d.%d.%d", + CAPTURE_DRV_NAME, + (VPFE_CAPTURE_VERSION_CODE >> 16) & 0xff, + (VPFE_CAPTURE_VERSION_CODE >> 8) & 0xff, + (VPFE_CAPTURE_VERSION_CODE) & 0xff); + + ret = v4l2_device_register(&pdev->dev, &vpfe_dev->v4l2_dev); + if (ret) { + v4l2_err(pdev->dev.driver, + "Unable to register v4l2 device.\n"); + goto probe_out_release_irq; + } + v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 device registered\n"); + spin_lock_init(&vpfe_dev->irqlock); + spin_lock_init(&vpfe_dev->dma_queue_lock); + mutex_init(&vpfe_dev->lock); + + /* Initialize field of the device objects */ + vpfe_dev->numbuffers = config_params.numbuffers; + + /* register video device */ + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "trying to register vpfe device.\n"); + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "video_dev=%p\n", &vpfe_dev->video_dev); + vpfe_dev->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + ret = video_register_device(&vpfe_dev->video_dev, + VFL_TYPE_VIDEO, -1); + + if (ret) { + v4l2_err(pdev->dev.driver, + "Unable to register video device.\n"); + goto probe_out_v4l2_unregister; + } + + v4l2_info(&vpfe_dev->v4l2_dev, "video device registered\n"); + /* set the driver data in platform device */ + platform_set_drvdata(pdev, vpfe_dev); + /* set driver private data */ + video_set_drvdata(&vpfe_dev->video_dev, vpfe_dev); + i2c_adap = i2c_get_adapter(vpfe_cfg->i2c_adapter_id); + num_subdevs = vpfe_cfg->num_subdevs; + vpfe_dev->sd = kmalloc_array(num_subdevs, + sizeof(*vpfe_dev->sd), + GFP_KERNEL); + if (!vpfe_dev->sd) { + ret = -ENOMEM; + goto probe_out_video_unregister; + } + + for (i = 0; i < num_subdevs; i++) { + struct v4l2_input *inps; + + sdinfo = &vpfe_cfg->sub_devs[i]; + + /* Load up the subdevice */ + vpfe_dev->sd[i] = + v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev, + i2c_adap, + &sdinfo->board_info, + NULL); + if (vpfe_dev->sd[i]) { + v4l2_info(&vpfe_dev->v4l2_dev, + "v4l2 sub device %s registered\n", + sdinfo->name); + vpfe_dev->sd[i]->grp_id = sdinfo->grp_id; + /* update tvnorms from the sub devices */ + for (j = 0; j < sdinfo->num_inputs; j++) { + inps = &sdinfo->inputs[j]; + vfd->tvnorms |= inps->std; + } + } else { + v4l2_info(&vpfe_dev->v4l2_dev, + "v4l2 sub device %s register fails\n", + sdinfo->name); + ret = -ENXIO; + goto probe_sd_out; + } + } + + /* set first sub device as current one */ + vpfe_dev->current_subdev = &vpfe_cfg->sub_devs[0]; + vpfe_dev->v4l2_dev.ctrl_handler = vpfe_dev->sd[0]->ctrl_handler; + + /* We have at least one sub device to work with */ + mutex_unlock(&ccdc_lock); + return 0; + +probe_sd_out: + kfree(vpfe_dev->sd); +probe_out_video_unregister: + video_unregister_device(&vpfe_dev->video_dev); +probe_out_v4l2_unregister: + v4l2_device_unregister(&vpfe_dev->v4l2_dev); +probe_out_release_irq: + free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); +probe_free_ccdc_cfg_mem: + kfree(ccdc_cfg); + mutex_unlock(&ccdc_lock); +probe_free_dev_mem: + kfree(vpfe_dev); + return ret; +} + +/* + * vpfe_remove : It un-register device from V4L2 driver + */ +static int vpfe_remove(struct platform_device *pdev) +{ + struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev); + + v4l2_info(pdev->dev.driver, "vpfe_remove\n"); + + free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); + kfree(vpfe_dev->sd); + v4l2_device_unregister(&vpfe_dev->v4l2_dev); + video_unregister_device(&vpfe_dev->video_dev); + kfree(vpfe_dev); + kfree(ccdc_cfg); + return 0; +} + +static int vpfe_suspend(struct device *dev) +{ + return 0; +} + +static int vpfe_resume(struct device *dev) +{ + return 0; +} + +static const struct dev_pm_ops vpfe_dev_pm_ops = { + .suspend = vpfe_suspend, + .resume = vpfe_resume, +}; + +static struct platform_driver vpfe_driver = { + .driver = { + .name = CAPTURE_DRV_NAME, + .pm = &vpfe_dev_pm_ops, + }, + .probe = vpfe_probe, + .remove = vpfe_remove, +}; + +module_platform_driver(vpfe_driver); |