diff options
Diffstat (limited to 'drivers/staging/panel/panel.c')
| -rw-r--r-- | drivers/staging/panel/panel.c | 2193 |
1 files changed, 2193 insertions, 0 deletions
diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c new file mode 100644 index 000000000000..5ffe269c2382 --- /dev/null +++ b/drivers/staging/panel/panel.c @@ -0,0 +1,2193 @@ +/* + * Front panel driver for Linux + * Copyright (C) 2000-2008, Willy Tarreau <w@1wt.eu> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This code drives an LCD module (/dev/lcd), and a keypad (/dev/keypad) + * connected to a parallel printer port. + * + * The LCD module may either be an HD44780-like 8-bit parallel LCD, or a 1-bit + * serial module compatible with Samsung's KS0074. The pins may be connected in + * any combination, everything is programmable. + * + * The keypad consists in a matrix of push buttons connecting input pins to + * data output pins or to the ground. The combinations have to be hard-coded + * in the driver, though several profiles exist and adding new ones is easy. + * + * Several profiles are provided for commonly found LCD+keypad modules on the + * market, such as those found in Nexcom's appliances. + * + * FIXME: + * - the initialization/deinitialization process is very dirty and should + * be rewritten. It may even be buggy. + * + * TODO: + * - document 24 keys keyboard (3 rows of 8 cols, 32 diodes + 2 inputs) + * - make the LCD a part of a virtual screen of Vx*Vy + * - make the inputs list smp-safe + * - change the keyboard to a double mapping : signals -> key_id -> values + * so that applications can change values without knowing signals + * + */ + +#include <linux/module.h> + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/spinlock.h> +#include <linux/smp_lock.h> +#include <linux/interrupt.h> +#include <linux/miscdevice.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/fcntl.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/ctype.h> +#include <linux/parport.h> +#include <linux/version.h> +#include <linux/list.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/utsrelease.h> + +#include <linux/io.h> +#include <asm/uaccess.h> +#include <asm/system.h> + +#define LCD_MINOR 156 +#define KEYPAD_MINOR 185 + +#define PANEL_VERSION "0.9.5" + +#define LCD_MAXBYTES 256 /* max burst write */ + +#define KEYPAD_BUFFER 64 +#define INPUT_POLL_TIME (HZ/50) /* poll the keyboard this every second */ +#define KEYPAD_REP_START (10) /* a key starts to repeat after this times INPUT_POLL_TIME */ +#define KEYPAD_REP_DELAY (2) /* a key repeats this times INPUT_POLL_TIME */ + +#define FLASH_LIGHT_TEMPO (200) /* keep the light on this times INPUT_POLL_TIME for each flash */ + +/* converts an r_str() input to an active high, bits string : 000BAOSE */ +#define PNL_PINPUT(a) ((((unsigned char)(a)) ^ 0x7F) >> 3) + +#define PNL_PBUSY 0x80 /* inverted input, active low */ +#define PNL_PACK 0x40 /* direct input, active low */ +#define PNL_POUTPA 0x20 /* direct input, active high */ +#define PNL_PSELECD 0x10 /* direct input, active high */ +#define PNL_PERRORP 0x08 /* direct input, active low */ + +#define PNL_PBIDIR 0x20 /* bi-directional ports */ +#define PNL_PINTEN 0x10 /* high to read data in or-ed with data out */ +#define PNL_PSELECP 0x08 /* inverted output, active low */ +#define PNL_PINITP 0x04 /* direct output, active low */ +#define PNL_PAUTOLF 0x02 /* inverted output, active low */ +#define PNL_PSTROBE 0x01 /* inverted output */ + +#define PNL_PD0 0x01 +#define PNL_PD1 0x02 +#define PNL_PD2 0x04 +#define PNL_PD3 0x08 +#define PNL_PD4 0x10 +#define PNL_PD5 0x20 +#define PNL_PD6 0x40 +#define PNL_PD7 0x80 + +#define PIN_NONE 0 +#define PIN_STROBE 1 +#define PIN_D0 2 +#define PIN_D1 3 +#define PIN_D2 4 +#define PIN_D3 5 +#define PIN_D4 6 +#define PIN_D5 7 +#define PIN_D6 8 +#define PIN_D7 9 +#define PIN_AUTOLF 14 +#define PIN_INITP 16 +#define PIN_SELECP 17 +#define PIN_NOT_SET 127 + +#define LCD_FLAG_S 0x0001 +#define LCD_FLAG_ID 0x0002 +#define LCD_FLAG_B 0x0004 /* blink on */ +#define LCD_FLAG_C 0x0008 /* cursor on */ +#define LCD_FLAG_D 0x0010 /* display on */ +#define LCD_FLAG_F 0x0020 /* large font mode */ +#define LCD_FLAG_N 0x0040 /* 2-rows mode */ +#define LCD_FLAG_L 0x0080 /* backlight enabled */ + +#define LCD_ESCAPE_LEN 24 /* 24 chars max for an LCD escape command */ +#define LCD_ESCAPE_CHAR 27 /* use char 27 for escape command */ + +/* macros to simplify use of the parallel port */ +#define r_ctr(x) (parport_read_control((x)->port)) +#define r_dtr(x) (parport_read_data((x)->port)) +#define r_str(x) (parport_read_status((x)->port)) +#define w_ctr(x, y) do { parport_write_control((x)->port, (y)); } while (0) +#define w_dtr(x, y) do { parport_write_data((x)->port, (y)); } while (0) + +/* this defines which bits are to be used and which ones to be ignored */ +static __u8 scan_mask_o; /* logical or of the output bits involved in the scan matrix */ +static __u8 scan_mask_i; /* logical or of the input bits involved in the scan matrix */ + +typedef __u64 pmask_t; + +enum input_type { + INPUT_TYPE_STD, + INPUT_TYPE_KBD, +}; + +enum input_state { + INPUT_ST_LOW, + INPUT_ST_RISING, + INPUT_ST_HIGH, + INPUT_ST_FALLING, +}; + +struct logical_input { + struct list_head list; + pmask_t mask; + pmask_t value; + enum input_type type; + enum input_state state; + __u8 rise_time, fall_time; + __u8 rise_timer, fall_timer, high_timer; + + union { + struct { /* this structure is valid when type == INPUT_TYPE_STD */ + void (*press_fct) (int); + void (*release_fct) (int); + int press_data; + int release_data; + } std; + struct { /* this structure is valid when type == INPUT_TYPE_KBD */ + /* strings can be full-length (ie. non null-terminated) */ + char press_str[sizeof(void *) + sizeof(int)]; + char repeat_str[sizeof(void *) + sizeof(int)]; + char release_str[sizeof(void *) + sizeof(int)]; + } kbd; + } u; +}; + +LIST_HEAD(logical_inputs); /* list of all defined logical inputs */ + +/* physical contacts history + * Physical contacts are a 45 bits string of 9 groups of 5 bits each. + * The 8 lower groups correspond to output bits 0 to 7, and the 9th group + * corresponds to the ground. + * Within each group, bits are stored in the same order as read on the port : + * BAPSE (busy=4, ack=3, paper empty=2, select=1, error=0). + * So, each __u64 (or pmask_t) is represented like this : + * 0000000000000000000BAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSE + * <-----unused------><gnd><d07><d06><d05><d04><d03><d02><d01><d00> + */ +static pmask_t phys_read; /* what has just been read from the I/O ports */ +static pmask_t phys_read_prev; /* previous phys_read */ +static pmask_t phys_curr; /* stabilized phys_read (phys_read|phys_read_prev) */ +static pmask_t phys_prev; /* previous phys_curr */ +static char inputs_stable; /* 0 means that at least one logical signal needs be computed */ + +/* these variables are specific to the keypad */ +static char keypad_buffer[KEYPAD_BUFFER]; +static int keypad_buflen; +static int keypad_start; +static char keypressed; +static wait_queue_head_t keypad_read_wait; + +/* lcd-specific variables */ +static unsigned long int lcd_flags; /* contains the LCD config state */ +static unsigned long int lcd_addr_x; /* contains the LCD X offset */ +static unsigned long int lcd_addr_y; /* contains the LCD Y offset */ +static char lcd_escape[LCD_ESCAPE_LEN + 1]; /* current escape sequence, 0 terminated */ +static int lcd_escape_len = -1; /* not in escape state. >=0 = escape cmd len */ + +/* + * Bit masks to convert LCD signals to parallel port outputs. + * _d_ are values for data port, _c_ are for control port. + * [0] = signal OFF, [1] = signal ON, [2] = mask + */ +#define BIT_CLR 0 +#define BIT_SET 1 +#define BIT_MSK 2 +#define BIT_STATES 3 +/* + * one entry for each bit on the LCD + */ +#define LCD_BIT_E 0 +#define LCD_BIT_RS 1 +#define LCD_BIT_RW 2 +#define LCD_BIT_BL 3 +#define LCD_BIT_CL 4 +#define LCD_BIT_DA 5 +#define LCD_BITS 6 + +/* + * each bit can be either connected to a DATA or CTRL port + */ +#define LCD_PORT_C 0 +#define LCD_PORT_D 1 +#define LCD_PORTS 2 + +static unsigned char lcd_bits[LCD_PORTS][LCD_BITS][BIT_STATES]; + +/* + * LCD protocols + */ +#define LCD_PROTO_PARALLEL 0 +#define LCD_PROTO_SERIAL 1 + +/* + * LCD character sets + */ +#define LCD_CHARSET_NORMAL 0 +#define LCD_CHARSET_KS0074 1 + +/* + * LCD types + */ +#define LCD_TYPE_NONE 0 +#define LCD_TYPE_OLD 1 +#define LCD_TYPE_KS0074 2 +#define LCD_TYPE_HANTRONIX 3 +#define LCD_TYPE_NEXCOM 4 +#define LCD_TYPE_CUSTOM 5 + +/* + * keypad types + */ +#define KEYPAD_TYPE_NONE 0 +#define KEYPAD_TYPE_OLD 1 +#define KEYPAD_TYPE_NEW 2 +#define KEYPAD_TYPE_NEXCOM 3 + +/* + * panel profiles + */ +#define PANEL_PROFILE_CUSTOM 0 +#define PANEL_PROFILE_OLD 1 +#define PANEL_PROFILE_NEW 2 +#define PANEL_PROFILE_HANTRONIX 3 +#define PANEL_PROFILE_NEXCOM 4 +#define PANEL_PROFILE_LARGE 5 + +/* + * Construct custom config from the kernel's configuration + */ +#define DEFAULT_PROFILE PANEL_PROFILE_LARGE +#define DEFAULT_PARPORT 0 +#define DEFAULT_LCD LCD_TYPE_OLD +#define DEFAULT_KEYPAD KEYPAD_TYPE_OLD +#define DEFAULT_LCD_WIDTH 40 +#define DEFAULT_LCD_BWIDTH 40 +#define DEFAULT_LCD_HWIDTH 64 +#define DEFAULT_LCD_HEIGHT 2 +#define DEFAULT_LCD_PROTO LCD_PROTO_PARALLEL + +#define DEFAULT_LCD_PIN_E PIN_AUTOLF +#define DEFAULT_LCD_PIN_RS PIN_SELECP +#define DEFAULT_LCD_PIN_RW PIN_INITP +#define DEFAULT_LCD_PIN_SCL PIN_STROBE +#define DEFAULT_LCD_PIN_SDA PIN_D0 +#define DEFAULT_LCD_PIN_BL PIN_NOT_SET +#define DEFAULT_LCD_CHARSET LCD_CHARSET_NORMAL + +#ifdef CONFIG_PANEL_PROFILE +#undef DEFAULT_PROFILE +#define DEFAULT_PROFILE CONFIG_PANEL_PROFILE +#endif + +#ifdef CONFIG_PANEL_PARPORT +#undef DEFAULT_PARPORT +#define DEFAULT_PARPORT CONFIG_PANEL_PARPORT +#endif + +#if DEFAULT_PROFILE == 0 /* custom */ +#ifdef CONFIG_PANEL_KEYPAD +#undef DEFAULT_KEYPAD +#define DEFAULT_KEYPAD CONFIG_PANEL_KEYPAD +#endif + +#ifdef CONFIG_PANEL_LCD +#undef DEFAULT_LCD +#define DEFAULT_LCD CONFIG_PANEL_LCD +#endif + +#ifdef CONFIG_PANEL_LCD_WIDTH +#undef DEFAULT_LCD_WIDTH +#define DEFAULT_LCD_WIDTH CONFIG_PANEL_LCD_WIDTH +#endif + +#ifdef CONFIG_PANEL_LCD_BWIDTH +#undef DEFAULT_LCD_BWIDTH +#define DEFAULT_LCD_BWIDTH CONFIG_PANEL_LCD_BWIDTH +#endif + +#ifdef CONFIG_PANEL_LCD_HWIDTH +#undef DEFAULT_LCD_HWIDTH +#define DEFAULT_LCD_HWIDTH CONFIG_PANEL_LCD_HWIDTH +#endif + +#ifdef CONFIG_PANEL_LCD_HEIGHT +#undef DEFAULT_LCD_HEIGHT +#define DEFAULT_LCD_HEIGHT CONFIG_PANEL_LCD_HEIGHT +#endif + +#ifdef CONFIG_PANEL_LCD_PROTO +#undef DEFAULT_LCD_PROTO +#define DEFAULT_LCD_PROTO CONFIG_PANEL_LCD_PROTO +#endif + +#ifdef CONFIG_PANEL_LCD_PIN_E +#undef DEFAULT_LCD_PIN_E +#define DEFAULT_LCD_PIN_E CONFIG_PANEL_LCD_PIN_E +#endif + +#ifdef CONFIG_PANEL_LCD_PIN_RS +#undef DEFAULT_LCD_PIN_RS +#define DEFAULT_LCD_PIN_RS CONFIG_PANEL_LCD_PIN_RS +#endif + +#ifdef CONFIG_PANEL_LCD_PIN_RW +#undef DEFAULT_LCD_PIN_RW +#define DEFAULT_LCD_PIN_RW CONFIG_PANEL_LCD_PIN_RW +#endif + +#ifdef CONFIG_PANEL_LCD_PIN_SCL +#undef DEFAULT_LCD_PIN_SCL +#define DEFAULT_LCD_PIN_SCL CONFIG_PANEL_LCD_PIN_SCL +#endif + +#ifdef CONFIG_PANEL_LCD_PIN_SDA +#undef DEFAULT_LCD_PIN_SDA +#define DEFAULT_LCD_PIN_SDA CONFIG_PANEL_LCD_PIN_SDA +#endif + +#ifdef CONFIG_PANEL_LCD_PIN_BL +#undef DEFAULT_LCD_PIN_BL +#define DEFAULT_LCD_PIN_BL CONFIG_PANEL_LCD_PIN_BL +#endif + +#ifdef CONFIG_PANEL_LCD_CHARSET +#undef DEFAULT_LCD_CHARSET +#define DEFAULT_LCD_CHARSET +#endif + +#endif /* DEFAULT_PROFILE == 0 */ + +/* global variables */ +static int keypad_open_cnt; /* #times opened */ +static int lcd_open_cnt; /* #times opened */ +static struct pardevice *pprt; + +static int lcd_initialized; +static int keypad_initialized; + +static int light_tempo; + +static char lcd_must_clear; +static char lcd_left_shift; +static char init_in_progress; + +static void (*lcd_write_cmd) (int); +static void (*lcd_write_data) (int); +static void (*lcd_clear_fast) (void); + +static DEFINE_SPINLOCK(pprt_lock); +static struct timer_list scan_timer; + +MODULE_DESCRIPTION("Generic parallel port LCD/Keypad driver"); + +static int parport = -1; +module_param(parport, int, 0000); +MODULE_PARM_DESC(parport, "Parallel port index (0=lpt1, 1=lpt2, ...)"); + +static int lcd_height = -1; +module_param(lcd_height, int, 0000); +MODULE_PARM_DESC(lcd_height, "Number of lines on the LCD"); + +static int lcd_width = -1; +module_param(lcd_width, int, 0000); +MODULE_PARM_DESC(lcd_width, "Number of columns on the LCD"); + +static int lcd_bwidth = -1; /* internal buffer width (usually 40) */ +module_param(lcd_bwidth, int, 0000); +MODULE_PARM_DESC(lcd_bwidth, "Internal LCD line width (40)"); + +static int lcd_hwidth = -1; /* hardware buffer width (usually 64) */ +module_param(lcd_hwidth, int, 0000); +MODULE_PARM_DESC(lcd_hwidth, "LCD line hardware address (64)"); + +static int lcd_enabled = -1; +module_param(lcd_enabled, int, 0000); +MODULE_PARM_DESC(lcd_enabled, "Deprecated option, use lcd_type instead"); + +static int keypad_enabled = -1; +module_param(keypad_enabled, int, 0000); +MODULE_PARM_DESC(keypad_enabled, "Deprecated option, use keypad_type instead"); + +static int lcd_type = -1; +module_param(lcd_type, int, 0000); +MODULE_PARM_DESC(lcd_type, + "LCD type: 0=none, 1=old //, 2=serial ks0074, 3=hantronix //, 4=nexcom //, 5=compiled-in"); + +static int lcd_proto = -1; +module_param(lcd_proto, int, 0000); +MODULE_PARM_DESC(lcd_proto, "LCD communication: 0=parallel (//), 1=serial"); + +static int lcd_charset = -1; +module_param(lcd_charset, int, 0000); +MODULE_PARM_DESC(lcd_charset, "LCD character set: 0=standard, 1=KS0074"); + +static int keypad_type = -1; +module_param(keypad_type, int, 0000); +MODULE_PARM_DESC(keypad_type, + "Keypad type: 0=none, 1=old 6 keys, 2=new 6+1 keys, 3=nexcom 4 keys"); + +static int profile = DEFAULT_PROFILE; +module_param(profile, int, 0000); +MODULE_PARM_DESC(profile, + "1=16x2 old kp; 2=serial 16x2, new kp; 3=16x2 hantronix; 4=16x2 nexcom; default=40x2, old kp"); + +/* + * These are the parallel port pins the LCD control signals are connected to. + * Set this to 0 if the signal is not used. Set it to its opposite value + * (negative) if the signal is negated. -MAXINT is used to indicate that the + * pin has not been explicitly specified. + * + * WARNING! no check will be performed about collisions with keypad ! + */ + +static int lcd_e_pin = PIN_NOT_SET; +module_param(lcd_e_pin, int, 0000); +MODULE_PARM_DESC(lcd_e_pin, + "# of the // port pin connected to LCD 'E' signal, with polarity (-17..17)"); + +static int lcd_rs_pin = PIN_NOT_SET; +module_param(lcd_rs_pin, int, 0000); +MODULE_PARM_DESC(lcd_rs_pin, + "# of the // port pin connected to LCD 'RS' signal, with polarity (-17..17)"); + +static int lcd_rw_pin = PIN_NOT_SET; +module_param(lcd_rw_pin, int, 0000); +MODULE_PARM_DESC(lcd_rw_pin, + "# of the // port pin connected to LCD 'RW' signal, with polarity (-17..17)"); + +static int lcd_bl_pin = PIN_NOT_SET; +module_param(lcd_bl_pin, int, 0000); +MODULE_PARM_DESC(lcd_bl_pin, + "# of the // port pin connected to LCD backlight, with polarity (-17..17)"); + +static int lcd_da_pin = PIN_NOT_SET; +module_param(lcd_da_pin, int, 0000); +MODULE_PARM_DESC(lcd_da_pin, + "# of the // port pin connected to serial LCD 'SDA' signal, with polarity (-17..17)"); + +static int lcd_cl_pin = PIN_NOT_SET; +module_param(lcd_cl_pin, int, 0000); +MODULE_PARM_DESC(lcd_cl_pin, + "# of the // port pin connected to serial LCD 'SCL' signal, with polarity (-17..17)"); + +static unsigned char *lcd_char_conv; + +/* for some LCD drivers (ks0074) we need a charset conversion table. */ +static unsigned char lcd_char_conv_ks0074[256] = { + /* 0|8 1|9 2|A 3|B 4|C 5|D 6|E 7|F */ + /* 0x00 */ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + /* 0x08 */ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + /* 0x10 */ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + /* 0x18 */ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, + /* 0x20 */ 0x20, 0x21, 0x22, 0x23, 0xa2, 0x25, 0x26, 0x27, + /* 0x28 */ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, + /* 0x30 */ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, + /* 0x38 */ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, + /* 0x40 */ 0xa0, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, + /* 0x48 */ 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, + /* 0x50 */ 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, + /* 0x58 */ 0x58, 0x59, 0x5a, 0xfa, 0xfb, 0xfc, 0x1d, 0xc4, + /* 0x60 */ 0x96, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, + /* 0x68 */ 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, + /* 0x70 */ 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, + /* 0x78 */ 0x78, 0x79, 0x7a, 0xfd, 0xfe, 0xff, 0xce, 0x20, + /* 0x80 */ 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + /* 0x88 */ 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, + /* 0x90 */ 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, + /* 0x98 */ 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f, + /* 0xA0 */ 0x20, 0x40, 0xb1, 0xa1, 0x24, 0xa3, 0xfe, 0x5f, + /* 0xA8 */ 0x22, 0xc8, 0x61, 0x14, 0x97, 0x2d, 0xad, 0x96, + /* 0xB0 */ 0x80, 0x8c, 0x82, 0x83, 0x27, 0x8f, 0x86, 0xdd, + /* 0xB8 */ 0x2c, 0x81, 0x6f, 0x15, 0x8b, 0x8a, 0x84, 0x60, + /* 0xC0 */ 0xe2, 0xe2, 0xe2, 0x5b, 0x5b, 0xae, 0xbc, 0xa9, + /* 0xC8 */ 0xc5, 0xbf, 0xc6, 0xf1, 0xe3, 0xe3, 0xe3, 0xe3, + /* 0xD0 */ 0x44, 0x5d, 0xa8, 0xe4, 0xec, 0xec, 0x5c, 0x78, + /* 0xD8 */ 0xab, 0xa6, 0xe5, 0x5e, 0x5e, 0xe6, 0xaa, 0xbe, + /* 0xE0 */ 0x7f, 0xe7, 0xaf, 0x7b, 0x7b, 0xaf, 0xbd, 0xc8, + /* 0xE8 */ 0xa4, 0xa5, 0xc7, 0xf6, 0xa7, 0xe8, 0x69, 0x69, + /* 0xF0 */ 0xed, 0x7d, 0xa8, 0xe4, 0xec, 0x5c, 0x5c, 0x25, + /* 0xF8 */ 0xac, 0xa6, 0xea, 0xef, 0x7e, 0xeb, 0xb2, 0x79, +}; + +char old_keypad_profile[][4][9] = { + {"S0", "Left\n", "Left\n", ""}, + {"S1", "Down\n", "Down\n", ""}, + {"S2", "Up\n", "Up\n", ""}, + {"S3", "Right\n", "Right\n", ""}, + {"S4", "Esc\n", "Esc\n", ""}, + {"S5", "Ret\n", "Ret\n", ""}, + {"", "", "", ""} +}; + +/* signals, press, repeat, release */ +char new_keypad_profile[][4][9] = { + {"S0", "Left\n", "Left\n", ""}, + {"S1", "Down\n", "Down\n", ""}, + {"S2", "Up\n", "Up\n", ""}, + {"S3", "Right\n", "Right\n", ""}, + {"S4s5", "", "Esc\n", "Esc\n"}, + {"s4S5", "", "Ret\n", "Ret\n"}, + {"S4S5", "Help\n", "", ""}, + /* add new signals above this line */ + {"", "", "", ""} +}; + +/* signals, press, repeat, release */ +char nexcom_keypad_profile[][4][9] = { + {"a-p-e-", "Down\n", "Down\n", ""}, + {"a-p-E-", "Ret\n", "Ret\n", ""}, + {"a-P-E-", "Esc\n", "Esc\n", ""}, + {"a-P-e-", "Up\n", "Up\n", ""}, + /* add new signals above this line */ + {"", "", "", ""} +}; + +static char (*keypad_profile)[4][9] = old_keypad_profile; + +/* FIXME: this should be converted to a bit array containing signals states */ +static struct { + unsigned char e; /* parallel LCD E (data latch on falling edge) */ + unsigned char rs; /* parallel LCD RS (0 = cmd, 1 = data) */ + unsigned char rw; /* parallel LCD R/W (0 = W, 1 = R) */ + unsigned char bl; /* parallel LCD backlight (0 = off, 1 = on) */ + unsigned char cl; /* serial LCD clock (latch on rising edge) */ + unsigned char da; /* serial LCD data */ +} bits; + +static void init_scan_timer(void); + +/* sets data port bits according to current signals values */ +static int set_data_bits(void) +{ + int val, bit; + + val = r_dtr(pprt); + for (bit = 0; bit < LCD_BITS; bit++) + val &= lcd_bits[LCD_PORT_D][bit][BIT_MSK]; + + val |= lcd_bits[LCD_PORT_D][LCD_BIT_E][bits.e] + | lcd_bits[LCD_PORT_D][LCD_BIT_RS][bits.rs] + | lcd_bits[LCD_PORT_D][LCD_BIT_RW][bits.rw] + | lcd_bits[LCD_PORT_D][LCD_BIT_BL][bits.bl] + | lcd_bits[LCD_PORT_D][LCD_BIT_CL][bits.cl] + | lcd_bits[LCD_PORT_D][LCD_BIT_DA][bits.da]; + + w_dtr(pprt, val); + return val; +} + +/* sets ctrl port bits according to current signals values */ +static int set_ctrl_bits(void) +{ + int val, bit; + + val = r_ctr(pprt); + for (bit = 0; bit < LCD_BITS; bit++) + val &= lcd_bits[LCD_PORT_C][bit][BIT_MSK]; + + val |= lcd_bits[LCD_PORT_C][LCD_BIT_E][bits.e] + | lcd_bits[LCD_PORT_C][LCD_BIT_RS][bits.rs] + | lcd_bits[LCD_PORT_C][LCD_BIT_RW][bits.rw] + | lcd_bits[LCD_PORT_C][LCD_BIT_BL][bits.bl] + | lcd_bits[LCD_PORT_C][LCD_BIT_CL][bits.cl] + | lcd_bits[LCD_PORT_C][LCD_BIT_DA][bits.da]; + + w_ctr(pprt, val); + return val; +} + +/* sets ctrl & data port bits according to current signals values */ +static void set_bits(void) +{ + set_data_bits(); + set_ctrl_bits(); +} + +/* + * Converts a parallel port pin (from -25 to 25) to data and control ports + * masks, and data and control port bits. The signal will be considered + * unconnected if it's on pin 0 or an invalid pin (<-25 or >25). + * + * Result will be used this way : + * out(dport, in(dport) & d_val[2] | d_val[signal_state]) + * out(cport, in(cport) & c_val[2] | c_val[signal_state]) + */ +void pin_to_bits(int pin, unsigned char *d_val, unsigned char *c_val) +{ + int d_bit, c_bit, inv; + + d_val[0] = c_val[0] = d_val[1] = c_val[1] = 0; + d_val[2] = c_val[2] = 0xFF; + + if (pin == 0) + return; + + inv = (pin < 0); + if (inv) + pin = -pin; + + d_bit = c_bit = 0; + + switch (pin) { + case PIN_STROBE: /* strobe, inverted */ + c_bit = PNL_PSTROBE; + inv = !inv; + break; + case PIN_D0...PIN_D7: /* D0 - D7 = 2 - 9 */ + d_bit = 1 << (pin - 2); + break; + case PIN_AUTOLF: /* autofeed, inverted */ + c_bit = PNL_PAUTOLF; + inv = !inv; + break; + case PIN_INITP: /* init, direct */ + c_bit = PNL_PINITP; + break; + case PIN_SELECP: /* select_in, inverted */ + c_bit = PNL_PSELECP; + inv = !inv; + break; + default: /* unknown pin, ignore */ + break; + } + + if (c_bit) { + c_val[2] &= ~c_bit; + c_val[!inv] = c_bit; + } else if (d_bit) { + d_val[2] &= ~d_bit; + d_val[!inv] = d_bit; + } +} + +/* sleeps that many milliseconds with a reschedule */ +static void long_sleep(int ms) +{ + + if (in_interrupt()) + mdelay(ms); + else { + current->state = TASK_INTERRUPTIBLE; + schedule_timeout((ms * HZ + 999) / 1000); + } +} + +/* send a serial byte to the LCD panel. The caller is responsible for locking if needed. */ +static void lcd_send_serial(int byte) +{ + int bit; + + /* the data bit is set on D0, and the clock on STROBE. + * LCD reads D0 on STROBE's rising edge. + */ + for (bit = 0; bit < 8; bit++) { + bits.cl = BIT_CLR; /* CLK low */ + set_bits(); + bits.da = byte & 1; + set_bits(); + udelay(2); /* maintain the data during 2 us before CLK up */ + bits.cl = BIT_SET; /* CLK high */ + set_bits(); + udelay(1); /* maintain the strobe during 1 us */ + byte >>= 1; + } +} + +/* turn the backlight on or off */ +static void lcd_backlight(int on) +{ + if (lcd_bl_pin == PIN_NONE) + return; + + /* The backlight is activated by seting the AUTOFEED line to +5V */ + spin_lock(&pprt_lock); + bits.bl = on; + set_bits(); + spin_unlock(&pprt_lock); +} + +/* send a command to the LCD panel in serial mode */ +static void lcd_write_cmd_s(int cmd) +{ + spin_lock(&pprt_lock); + lcd_send_serial(0x1F); /* R/W=W, RS=0 */ + lcd_send_serial(cmd & 0x0F); + lcd_send_serial((cmd >> 4) & 0x0F); + udelay(40); /* the shortest command takes at least 40 us */ + spin_unlock(&pprt_lock); +} + +/* send data to the LCD panel in serial mode */ +static void lcd_write_data_s(int data) +{ + spin_lock(&pprt_lock); + lcd_send_serial(0x5F); /* R/W=W, RS=1 */ + lcd_send_serial(data & 0x0F); + lcd_send_serial((data >> 4) & 0x0F); + udelay(40); /* the shortest data takes at least 40 us */ + spin_unlock(&pprt_lock); +} + +/* send a command to the LCD panel in 8 bits parallel mode */ +static void lcd_write_cmd_p8(int cmd) +{ + spin_lock(&pprt_lock); + /* present the data to the data port */ + w_dtr(pprt, cmd); + udelay(20); /* maintain the data during 20 us before the strobe */ + + bits.e = BIT_SET; + bits.rs = BIT_CLR; + bits.rw = BIT_CLR; + set_ctrl_bits(); + + udelay(40); /* maintain the strobe during 40 us */ + + bits.e = BIT_CLR; + set_ctrl_bits(); + + udelay(120); /* the shortest command takes at least 120 us */ + spin_unlock(&pprt_lock); +} + +/* send data to the LCD panel in 8 bits parallel mode */ +static void lcd_write_data_p8(int data) +{ + spin_lock(&pprt_lock); + /* present the data to the data port */ + w_dtr(pprt, data); + udelay(20); /* maintain the data during 20 us before the strobe */ + + bits.e = BIT_SET; + bits.rs = BIT_SET; + bits.rw = BIT_CLR; + set_ctrl_bits(); + + udelay(40); /* maintain the strobe during 40 us */ + + bits.e = BIT_CLR; + set_ctrl_bits(); + + udelay(45); /* the shortest data takes at least 45 us */ + spin_unlock(&pprt_lock); +} + +static void lcd_gotoxy(void) +{ + lcd_write_cmd(0x80 /* set DDRAM address */ + | (lcd_addr_y ? lcd_hwidth : 0) + /* we force the cursor to stay at the end of the line if it wants to go farther */ + | ((lcd_addr_x < lcd_bwidth) ? lcd_addr_x & + (lcd_hwidth - 1) : lcd_bwidth - 1)); +} + +static void lcd_print(char c) +{ + if (lcd_addr_x < lcd_bwidth) { + if (lcd_char_conv != NULL) + c = lcd_char_conv[(unsigned char)c]; + lcd_write_data(c); + lcd_addr_x++; + } + /* prevents the cursor from wrapping onto the next line */ + if (lcd_addr_x == lcd_bwidth) + lcd_gotoxy(); +} + +/* fills the display with spaces and resets X/Y */ +static void lcd_clear_fast_s(void) +{ + int pos; + lcd_addr_x = lcd_addr_y = 0; + lcd_gotoxy(); + + spin_lock(&pprt_lock); + for (pos = 0; pos < lcd_height * lcd_hwidth; pos++) { + lcd_send_serial(0x5F); /* R/W=W, RS=1 */ + lcd_send_serial(' ' & 0x0F); + lcd_send_serial((' ' >> 4) & 0x0F); + udelay(40); /* the shortest data takes at least 40 us */ + } + spin_unlock(&pprt_lock); + + lcd_addr_x = lcd_addr_y = 0; + lcd_gotoxy(); +} + +/* fills the display with spaces and resets X/Y */ +static void lcd_clear_fast_p8(void) +{ + int pos; + lcd_addr_x = lcd_addr_y = 0; + lcd_gotoxy(); + + spin_lock(&pprt_lock); + for (pos = 0; pos < lcd_height * lcd_hwidth; pos++) { + /* present the data to the data port */ + w_dtr(pprt, ' '); + udelay(20); /* maintain the data during 20 us before the strobe */ + + bits.e = BIT_SET; + bits.rs = BIT_SET; + bits.rw = BIT_CLR; + set_ctrl_bits(); + + udelay(40); /* maintain the strobe during 40 us */ + + bits.e = BIT_CLR; + set_ctrl_bits(); + + udelay(45); /* the shortest data takes at least 45 us */ + } + spin_unlock(&pprt_lock); + + lcd_addr_x = lcd_addr_y = 0; + lcd_gotoxy(); +} + +/* clears the display and resets X/Y */ +static void lcd_clear_display(void) +{ + lcd_write_cmd(0x01); /* clear display */ + lcd_addr_x = lcd_addr_y = 0; + /* we must wait a few milliseconds (15) */ + long_sleep(15); +} + +static void lcd_init_display(void) +{ + + lcd_flags = ((lcd_height > 1) ? LCD_FLAG_N : 0) + | LCD_FLAG_D | LCD_FLAG_C | LCD_FLAG_B; + + long_sleep(20); /* wait 20 ms after power-up for the paranoid */ + + lcd_write_cmd(0x30); /* 8bits, 1 line, small fonts */ + long_sleep(10); + lcd_write_cmd(0x30); /* 8bits, 1 line, small fonts */ + long_sleep(10); + lcd_write_cmd(0x30); /* 8bits, 1 line, small fonts */ + long_sleep(10); + + lcd_write_cmd(0x30 /* set font height and lines number */ + | ((lcd_flags & LCD_FLAG_F) ? 4 : 0) + | ((lcd_flags & LCD_FLAG_N) ? 8 : 0) + ); + long_sleep(10); + + lcd_write_cmd(0x08); /* display off, cursor off, blink off */ + long_sleep(10); + + lcd_write_cmd(0x08 /* set display mode */ + | ((lcd_flags & LCD_FLAG_D) ? 4 : 0) + | ((lcd_flags & LCD_FLAG_C) ? 2 : 0) + | ((lcd_flags & LCD_FLAG_B) ? 1 : 0) + ); + + lcd_backlight((lcd_flags & LCD_FLAG_L) ? 1 : 0); + + long_sleep(10); + + lcd_write_cmd(0x06); /* entry mode set : increment, cursor shifting */ + + lcd_clear_display(); +} + +/* + * These are the file operation function for user access to /dev/lcd + * This function can also be called from inside the kernel, by + * setting file and ppos to NULL. + * + */ + +static ssize_t lcd_write(struct file *file, + const char *buf, size_t count, loff_t *ppos) +{ + + const char *tmp = buf; + char c; + + for (; count-- > 0; (ppos ? (*ppos)++ : 0), ++tmp) { + if (!in_interrupt() && (((count + 1) & 0x1f) == 0)) + schedule(); /* let's be a little nice with other processes that need some CPU */ + + if (ppos == NULL && file == NULL) + c = *tmp; /* let's not use get_user() from the kernel ! */ + else if (get_user(c, tmp)) + return -EFAULT; + + /* first, we'll test if we're in escape mode */ + if ((c != '\n') && lcd_escape_len >= 0) { /* yes, let's add this char to the buffer */ + lcd_escape[lcd_escape_len++] = c; + lcd_escape[lcd_escape_len] = 0; + } else { + lcd_escape_len = -1; /* aborts any previous escape sequence */ + + switch (c) { + case LCD_ESCAPE_CHAR: /* start of an escape sequence */ + lcd_escape_len = 0; + lcd_escape[lcd_escape_len] = 0; + break; + case '\b': /* go back one char and clear it */ + if (lcd_addr_x > 0) { + if (lcd_addr_x < lcd_bwidth) /* check if we're not at the end of the line */ + lcd_write_cmd(0x10); /* back one char */ + lcd_addr_x--; + } + lcd_write_data(' '); /* replace with a space */ + lcd_write_cmd(0x10); /* back one char again */ + break; + case '\014': /* quickly clear the display */ + lcd_clear_fast(); + break; + case '\n': /* flush the remainder of the current line and go to the + beginning of the next line */ + for (; lcd_addr_x < lcd_bwidth; lcd_addr_x++) + lcd_write_data(' '); + lcd_addr_x = 0; + lcd_addr_y = (lcd_addr_y + 1) % lcd_height; + lcd_gotoxy(); + break; + case '\r': /* go to the beginning of the same line */ + lcd_addr_x = 0; + lcd_gotoxy(); + break; + case '\t': /* print a space instead of the tab */ + lcd_print(' '); + break; + default: /* simply print this char */ + lcd_print(c); + break; + } + } + + /* now we'll see if we're in an escape mode and if the current + escape sequence can be understood. + */ + if (lcd_escape_len >= 2) { /* minimal length for an escape command */ + int processed = 0; /* 1 means the command has been processed */ + + if (!strcmp(lcd_escape, "[2J")) { /* Clear the display */ + lcd_clear_fast(); /* clear display */ + processed = 1; + } else if (!strcmp(lcd_escape, "[H")) { /* Cursor to home */ + lcd_addr_x = lcd_addr_y = 0; + lcd_gotoxy(); + processed = 1; + } + /* codes starting with ^[[L */ + else if ((lcd_escape_len >= 3) && + (lcd_escape[0] == '[') && (lcd_escape[1] == 'L')) { /* LCD special codes */ + + char *esc = lcd_escape + 2; + int oldflags = lcd_flags; + + /* check for display mode flags */ + switch (*esc) { + case 'D': /* Display ON */ + lcd_flags |= LCD_FLAG_D; + processed = 1; + break; + case 'd': /* Display OFF */ + lcd_flags &= ~LCD_FLAG_D; + processed = 1; + break; + case 'C': /* Cursor ON */ + lcd_flags |= LCD_FLAG_C; + processed = 1; + break; + case 'c': /* Cursor OFF */ + lcd_flags &= ~LCD_FLAG_C; + processed = 1; + break; + case 'B': /* Blink ON */ + lcd_flags |= LCD_FLAG_B; + processed = 1; + break; + case 'b': /* Blink OFF */ + lcd_flags &= ~LCD_FLAG_B; + processed = 1; + break; + case '+': /* Back light ON */ + lcd_flags |= LCD_FLAG_L; + processed = 1; + break; + case '-': /* Back light OFF */ + lcd_flags &= ~LCD_FLAG_L; + processed = 1; + break; + case '*': /* flash back light using the keypad timer */ + if (scan_timer.function != NULL) { + if (light_tempo == 0 + && ((lcd_flags & LCD_FLAG_L) + == 0)) + lcd_backlight(1); + light_tempo = FLASH_LIGHT_TEMPO; + } + processed = 1; + break; + case 'f': /* Small Font */ + lcd_flags &= ~LCD_FLAG_F; + processed = 1; + break; + case 'F': /* Large Font */ + lcd_flags |= LCD_FLAG_F; + processed = 1; + break; + case 'n': /* One Line */ + lcd_flags &= ~LCD_FLAG_N; + processed = 1; + break; + case 'N': /* Two Lines */ + lcd_flags |= LCD_FLAG_N; + break; + + case 'l': /* Shift Cursor Left */ + if (lcd_addr_x > 0) { + if (lcd_addr_x < lcd_bwidth) + lcd_write_cmd(0x10); /* back one char if not at end of line */ + lcd_addr_x--; + } + processed = 1; + break; + + case 'r': /* shift cursor right */ + if (lcd_addr_x < lcd_width) { + if (lcd_addr_x < (lcd_bwidth - 1)) + lcd_write_cmd(0x14); /* allow the cursor to pass the end of the line */ + lcd_addr_x++; + } + processed = 1; + break; + + case 'L': /* shift display left */ + lcd_left_shift++; + lcd_write_cmd(0x18); + processed = 1; + break; + + case 'R': /* shift display right */ + lcd_left_shift--; + lcd_write_cmd(0x1C); + processed = 1; + break; + + case 'k':{ /* kill end of line */ + int x; + for (x = lcd_addr_x; x < lcd_bwidth; x++) + lcd_write_data(' '); + lcd_gotoxy(); /* restore cursor position */ + processed = 1; + break; + } + case 'I': /* reinitialize display */ + lcd_init_display(); + lcd_left_shift = 0; + processed = 1; + break; + + case 'G': /* Generator : LGcxxxxx...xx; */ { + /* must have <c> between '0' and '7', representing the numerical + * ASCII code of the redefined character, and <xx...xx> a sequence + * of 16 hex digits representing 8 bytes for each character. Most + * LCDs will only use 5 lower bits of the 7 first bytes. + */ + + unsigned char cgbytes[8]; + unsigned char cgaddr; + int cgoffset; + int shift; + char value; + int addr; + + if (strchr(esc, ';') == NULL) + break; + + esc++; + + cgaddr = *(esc++) - '0'; + if (cgaddr > 7) { + processed = 1; + break; + } + + cgoffset = 0; + shift = 0; + value = 0; + while (*esc && cgoffset < 8) { + shift ^= 4; + if (*esc >= '0' && *esc <= '9') + value |= (*esc - '0') << shift; + else if (*esc >= 'A' && *esc <= 'Z') + value |= (*esc - 'A' + 10) << shift; + else if (*esc >= 'a' && *esc <= 'z') + value |= (*esc - 'a' + 10) << shift; + else { + esc++; + continue; + } + + if (shift == 0) { + cgbytes[cgoffset++] = value; + value = 0; + } + + esc++; + } + + lcd_write_cmd(0x40 | (cgaddr * 8)); + for (addr = 0; addr < cgoffset; addr++) + lcd_write_data(cgbytes[addr]); + + lcd_gotoxy(); /* ensures that we stop writing to CGRAM */ + processed = 1; + break; + } + case 'x': /* gotoxy : LxXXX[yYYY]; */ + case 'y': /* gotoxy : LyYYY[xXXX]; */ + if (strchr(esc, ';') == NULL) + break; + + while (*esc) { + if (*esc == 'x') { + esc++; + lcd_addr_x = 0; + while (isdigit(*esc)) { + lcd_addr_x = + lcd_addr_x * + 10 + (*esc - + '0'); + esc++; + } + } else if (*esc == 'y') { + esc++; + lcd_addr_y = 0; + while (isdigit(*esc)) { + lcd_addr_y = + lcd_addr_y * + 10 + (*esc - + '0'); + esc++; + } + } else + break; + } + + lcd_gotoxy(); + processed = 1; + break; + } /* end of switch */ + + /* Check wether one flag was changed */ + if (oldflags != lcd_flags) { + /* check wether one of B,C,D flags was changed */ + if ((oldflags ^ lcd_flags) & + (LCD_FLAG_B | LCD_FLAG_C | LCD_FLAG_D)) + /* set display mode */ + lcd_write_cmd(0x08 | + ((lcd_flags & LCD_FLAG_D) ? 4 : 0) | + ((lcd_flags & LCD_FLAG_C) ? 2 : 0) | + ((lcd_flags & LCD_FLAG_B) ? 1 : 0)); + /* check wether one of F,N flags was changed */ + else if ((oldflags ^ lcd_flags) & + (LCD_FLAG_F | LCD_FLAG_N)) + lcd_write_cmd(0x30 | + ((lcd_flags & LCD_FLAG_F) ? 4 : 0) | + ((lcd_flags & LCD_FLAG_N) ? 8 : 0)); + /* check wether L flag was changed */ + else if ((oldflags ^ lcd_flags) & + (LCD_FLAG_L)) { + if (lcd_flags & (LCD_FLAG_L)) + lcd_backlight(1); + else if (light_tempo == 0) /* switch off the light only when the tempo lighting is gone */ + lcd_backlight(0); + } + } + } + + /* LCD special escape codes */ + /* flush the escape sequence if it's been processed or if it is + getting too long. */ + if (processed || (lcd_escape_len >= LCD_ESCAPE_LEN)) + lcd_escape_len = -1; + } /* escape codes */ + } + + return tmp - buf; +} + +static int lcd_open(struct inode *inode, struct file *file) +{ + if (lcd_open_cnt) + return -EBUSY; /* open only once at a time */ + + if (file->f_mode & FMODE_READ) /* device is write-only */ + return -EPERM; + + if (lcd_must_clear) { + lcd_clear_display(); + lcd_must_clear = 0; + } + lcd_open_cnt++; + return 0; +} + +static int lcd_release(struct inode *inode, struct file *file) +{ + lcd_open_cnt--; + return 0; +} + +static struct file_operations lcd_fops = { + .write = lcd_write, + .open = lcd_open, + .release = lcd_release, +}; + +static struct miscdevice lcd_dev = { + LCD_MINOR, + "lcd", + &lcd_fops +}; + +/* public function usable from the kernel for any purpose */ +void panel_lcd_print(char *s) +{ + if (lcd_enabled && lcd_initialized) + lcd_write(NULL, s, strlen(s), NULL); +} + +/* initialize the LCD driver */ +void lcd_init(void) +{ + switch (lcd_type) { + case LCD_TYPE_OLD: /* parallel mode, 8 bits */ + if (lcd_proto < 0) + lcd_proto = LCD_PROTO_PARALLEL; + if (lcd_charset < 0) + lcd_charset = LCD_CHARSET_NORMAL; + if (lcd_e_pin == PIN_NOT_SET) + lcd_e_pin = PIN_STROBE; + if (lcd_rs_pin == PIN_NOT_SET) + lcd_rs_pin = PIN_AUTOLF; + + if (lcd_width < 0) + lcd_width = 40; + if (lcd_bwidth < 0) + lcd_bwidth = 40; + if (lcd_hwidth < 0) + lcd_hwidth = 64; + if (lcd_height < 0) + lcd_height = 2; + break; + case LCD_TYPE_KS0074: /* serial mode, ks0074 */ + if (lcd_proto < 0) + lcd_proto = LCD_PROTO_SERIAL; + if (lcd_charset < 0) + lcd_charset = LCD_CHARSET_KS0074; + if (lcd_bl_pin == PIN_NOT_SET) + lcd_bl_pin = PIN_AUTOLF; + if (lcd_cl_pin == PIN_NOT_SET) + lcd_cl_pin = PIN_STROBE; + if (lcd_da_pin == PIN_NOT_SET) + lcd_da_pin = PIN_D0; + + if (lcd_width < 0) + lcd_width = 16; + if (lcd_bwidth < 0) + lcd_bwidth = 40; + if (lcd_hwidth < 0) + lcd_hwidth = 16; + if (lcd_height < 0) + lcd_height = 2; + break; + case LCD_TYPE_NEXCOM: /* parallel mode, 8 bits, generic */ + if (lcd_proto < 0) + lcd_proto = LCD_PROTO_PARALLEL; + if (lcd_charset < 0) + lcd_charset = LCD_CHARSET_NORMAL; + if (lcd_e_pin == PIN_NOT_SET) + lcd_e_pin = PIN_AUTOLF; + if (lcd_rs_pin == PIN_NOT_SET) + lcd_rs_pin = PIN_SELECP; + if (lcd_rw_pin == PIN_NOT_SET) + lcd_rw_pin = PIN_INITP; + + if (lcd_width < 0) + lcd_width = 16; + if (lcd_bwidth < 0) + lcd_bwidth = 40; + if (lcd_hwidth < 0) + lcd_hwidth = 64; + if (lcd_height < 0) + lcd_height = 2; + break; + case LCD_TYPE_CUSTOM: /* customer-defined */ + if (lcd_proto < 0) + lcd_proto = DEFAULT_LCD_PROTO; + if (lcd_charset < 0) + lcd_charset = DEFAULT_LCD_CHARSET; + /* default geometry will be set later */ + break; + case LCD_TYPE_HANTRONIX: /* parallel mode, 8 bits, hantronix-like */ + default: + if (lcd_proto < 0) + lcd_proto = LCD_PROTO_PARALLEL; + if (lcd_charset < 0) + lcd_charset = LCD_CHARSET_NORMAL; + if (lcd_e_pin == PIN_NOT_SET) + lcd_e_pin = PIN_STROBE; + if (lcd_rs_pin == PIN_NOT_SET) + lcd_rs_pin = PIN_SELECP; + + if (lcd_width < 0) + lcd_width = 16; + if (lcd_bwidth < 0) + lcd_bwidth = 40; + if (lcd_hwidth < 0) + lcd_hwidth = 64; + if (lcd_height < 0) + lcd_height = 2; + break; + } + + /* this is used to catch wrong and default values */ + if (lcd_width <= 0) + lcd_width = DEFAULT_LCD_WIDTH; + if (lcd_bwidth <= 0) + lcd_bwidth = DEFAULT_LCD_BWIDTH; + if (lcd_hwidth <= 0) + lcd_hwidth = DEFAULT_LCD_HWIDTH; + if (lcd_height <= 0) + lcd_height = DEFAULT_LCD_HEIGHT; + + if (lcd_proto == LCD_PROTO_SERIAL) { /* SERIAL */ + lcd_write_cmd = lcd_write_cmd_s; + lcd_write_data = lcd_write_data_s; + lcd_clear_fast = lcd_clear_fast_s; + + if (lcd_cl_pin == PIN_NOT_SET) + lcd_cl_pin = DEFAULT_LCD_PIN_SCL; + if (lcd_da_pin == PIN_NOT_SET) + lcd_da_pin = DEFAULT_LCD_PIN_SDA; + + } else { /* PARALLEL */ + lcd_write_cmd = lcd_write_cmd_p8; + lcd_write_data = lcd_write_data_p8; + lcd_clear_fast = lcd_clear_fast_p8; + + if (lcd_e_pin == PIN_NOT_SET) + lcd_e_pin = DEFAULT_LCD_PIN_E; + if (lcd_rs_pin == PIN_NOT_SET) + lcd_rs_pin = DEFAULT_LCD_PIN_RS; + if (lcd_rw_pin == PIN_NOT_SET) + lcd_rw_pin = DEFAULT_LCD_PIN_RW; + } + + if (lcd_bl_pin == PIN_NOT_SET) + lcd_bl_pin = DEFAULT_LCD_PIN_BL; + + if (lcd_e_pin == PIN_NOT_SET) + lcd_e_pin = PIN_NONE; + if (lcd_rs_pin == PIN_NOT_SET) + lcd_rs_pin = PIN_NONE; + if (lcd_rw_pin == PIN_NOT_SET) + lcd_rw_pin = PIN_NONE; + if (lcd_bl_pin == PIN_NOT_SET) + lcd_bl_pin = PIN_NONE; + if (lcd_cl_pin == PIN_NOT_SET) + lcd_cl_pin = PIN_NONE; + if (lcd_da_pin == PIN_NOT_SET) + lcd_da_pin = PIN_NONE; + + if (lcd_charset < 0) + lcd_charset = DEFAULT_LCD_CHARSET; + + if (lcd_charset == LCD_CHARSET_KS0074) + lcd_char_conv = lcd_char_conv_ks0074; + else + lcd_char_conv = NULL; + + if (lcd_bl_pin != PIN_NONE) + init_scan_timer(); + + pin_to_bits(lcd_e_pin, lcd_bits[LCD_PORT_D][LCD_BIT_E], + lcd_bits[LCD_PORT_C][LCD_BIT_E]); + pin_to_bits(lcd_rs_pin, lcd_bits[LCD_PORT_D][LCD_BIT_RS], + lcd_bits[LCD_PORT_C][LCD_BIT_RS]); + pin_to_bits(lcd_rw_pin, lcd_bits[LCD_PORT_D][LCD_BIT_RW], + lcd_bits[LCD_PORT_C][LCD_BIT_RW]); + pin_to_bits(lcd_bl_pin, lcd_bits[LCD_PORT_D][LCD_BIT_BL], + lcd_bits[LCD_PORT_C][LCD_BIT_BL]); + pin_to_bits(lcd_cl_pin, lcd_bits[LCD_PORT_D][LCD_BIT_CL], + lcd_bits[LCD_PORT_C][LCD_BIT_CL]); + pin_to_bits(lcd_da_pin, lcd_bits[LCD_PORT_D][LCD_BIT_DA], + lcd_bits[LCD_PORT_C][LCD_BIT_DA]); + + /* before this line, we must NOT send anything to the display. + * Since lcd_init_display() needs to write data, we have to + * enable mark the LCD initialized just before. + */ + lcd_initialized = 1; + lcd_init_display(); + + /* display a short message */ +#ifdef CONFIG_PANEL_CHANGE_MESSAGE +#ifdef CONFIG_PANEL_BOOT_MESSAGE + panel_lcd_print("\x1b[Lc\x1b[Lb\x1b[L*" CONFIG_PANEL_BOOT_MESSAGE); +#endif +#else + panel_lcd_print("\x1b[Lc\x1b[Lb\x1b[L*Linux-" UTS_RELEASE "\nPanel-" + PANEL_VERSION); +#endif + lcd_addr_x = lcd_addr_y = 0; + lcd_must_clear = 1; /* clear the display on the next device opening */ + lcd_gotoxy(); +} + +/* + * These are the file operation function for user access to /dev/keypad + */ + +static ssize_t keypad_read(struct file *file, + char *buf, size_t count, loff_t *ppos) +{ + + unsigned i = *ppos; + char *tmp = buf; + + if (keypad_buflen == 0) { + if (file->f_flags & O_NONBLOCK) + return -EAGAIN; + + interruptible_sleep_on(&keypad_read_wait); + if (signal_pending(current)) + return -EINTR; + } + + for (; count-- > 0 && (keypad_buflen > 0); ++i, ++tmp, --keypad_buflen) { + put_user(keypad_buffer[keypad_start], tmp); + keypad_start = (keypad_start + 1) % KEYPAD_BUFFER; + } + *ppos = i; + + return tmp - buf; +} + +static int keypad_open(struct inode *inode, struct file *file) +{ + + if (keypad_open_cnt) + return -EBUSY; /* open only once at a time */ + + if (file->f_mode & FMODE_WRITE) /* device is read-only */ + return -EPERM; + + keypad_buflen = 0; /* flush the buffer on opening */ + keypad_open_cnt++; + return 0; +} + +static int keypad_release(struct inode *inode, struct file *file) +{ + keypad_open_cnt--; + return 0; +} + +static struct file_operations keypad_fops = { + .read = keypad_read, /* read */ + .open = keypad_open, /* open */ + .release = keypad_release, /* close */ +}; + +static struct miscdevice keypad_dev = { + KEYPAD_MINOR, + "keypad", + &keypad_fops +}; + +static void keypad_send_key(char *string, int max_len) +{ + if (init_in_progress) + return; + + /* send the key to the device only if a process is attached to it. */ + if (keypad_open_cnt > 0) { + while (max_len-- && keypad_buflen < KEYPAD_BUFFER && *string) { + keypad_buffer[(keypad_start + keypad_buflen++) % + KEYPAD_BUFFER] = *string++; + } + wake_up_interruptible(&keypad_read_wait); + } +} + +/* this function scans all the bits involving at least one logical signal, and puts the + * results in the bitfield "phys_read" (one bit per established contact), and sets + * "phys_read_prev" to "phys_read". + * + * Note: to debounce input signals, we will only consider as switched a signal which is + * stable across 2 measures. Signals which are different between two reads will be kept + * as they previously were in their logical form (phys_prev). A signal which has just + * switched will have a 1 in (phys_read ^ phys_read_prev). + */ +static void phys_scan_contacts(void) +{ + int bit, bitval; + char oldval; + char bitmask; + char gndmask; + + phys_prev = phys_curr; + phys_read_prev = phys_read; + phys_read = 0; /* flush all signals */ + + oldval = r_dtr(pprt) | scan_mask_o; /* keep track of old value, with all outputs disabled */ + w_dtr(pprt, oldval & ~scan_mask_o); /* activate all keyboard outputs (active low) */ + bitmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i; /* will have a 1 for each bit set to gnd */ + w_dtr(pprt, oldval); /* disable all matrix signals */ + + /* now that all outputs are cleared, the only active input bits are + * directly connected to the ground + */ + gndmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i; /* 1 for each grounded input */ + + phys_read |= (pmask_t) gndmask << 40; /* grounded inputs are signals 40-44 */ + + if (bitmask != gndmask) { + /* since clearing the outputs changed some inputs, we know that some + * input signals are currently tied to some outputs. So we'll scan them. + */ + for (bit = 0; bit < 8; bit++) { + bitval = 1 << bit; + + if (!(scan_mask_o & bitval)) /* skip unused bits */ + continue; + + w_dtr(pprt, oldval & ~bitval); /* enable this output */ + bitmask = PNL_PINPUT(r_str(pprt)) & ~gndmask; + phys_read |= (pmask_t) bitmask << (5 * bit); + } + w_dtr(pprt, oldval); /* disable all outputs */ + } + /* this is easy: use old bits when they are flapping, use new ones when stable */ + phys_curr = + (phys_prev & (phys_read ^ phys_read_prev)) | (phys_read & + ~(phys_read ^ + phys_read_prev)); +} + +static void panel_process_inputs(void) +{ + struct list_head *item; + struct logical_input *input; + +#if 0 + printk(KERN_DEBUG + "entering panel_process_inputs with pp=%016Lx & pc=%016Lx\n", + phys_prev, phys_curr); +#endif + + keypressed = 0; + inputs_stable = 1; + list_for_each(item, &logical_inputs) { + input = list_entry(item, struct logical_input, list); + + switch (input->state) { + case INPUT_ST_LOW: + if ((phys_curr & input->mask) != input->value) + break; + /* if all needed ones were already set previously, this means that + * this logical signal has been activated by the releasing of + * another combined signal, so we don't want to match. + * eg: AB -(release B)-> A -(release A)-> 0 : don't match A. + */ + if ((phys_prev & input->mask) == input->value) + break; + input->rise_timer = 0; + input->state = INPUT_ST_RISING; + /* no break here, fall through */ + case INPUT_ST_RISING: + if ((phys_curr & input->mask) != input->value) { + input->state = INPUT_ST_LOW; + break; + } + if (input->rise_timer < input->rise_time) { + inputs_stable = 0; + input->rise_timer++; + break; + } + input->high_timer = 0; + input->state = INPUT_ST_HIGH; + /* no break here, fall through */ + case INPUT_ST_HIGH: +#if 0 + /* FIXME: + * this is an invalid test. It tries to catch transitions from single-key + * to multiple-key, but doesn't take into account the contacts polarity. + * The only solution to the problem is to parse keys from the most complex + * to the simplest combinations, and mark them as 'caught' once a combination + * matches, then unmatch it for all other ones. + */ + + /* try to catch dangerous transitions cases : + * someone adds a bit, so this signal was a false + * positive resulting from a transition. We should invalidate + * the signal immediately and not call the release function. + * eg: 0 -(press A)-> A -(press B)-> AB : don't match A's release. + */ + if (((phys_prev & input->mask) == input->value) + && ((phys_curr & input->mask) > input->value)) { + input->state = INPUT_ST_LOW; /* invalidate */ + break; + } +#endif + + if ((phys_curr & input->mask) == input->value) { + if ((input->type == INPUT_TYPE_STD) + && (input->high_timer == 0)) { + input->high_timer++; + if (input->u.std.press_fct != NULL) + input->u.std.press_fct(input->u. + std. + press_data); + } else if (input->type == INPUT_TYPE_KBD) { + keypressed = 1; /* will turn on the light */ + + if (input->high_timer == 0) { + if (input->u.kbd.press_str[0]) + keypad_send_key(input-> + u.kbd. + press_str, + sizeof + (input-> + u.kbd. + press_str)); + } + + if (input->u.kbd.repeat_str[0]) { + if (input->high_timer >= + KEYPAD_REP_START) { + input->high_timer -= + KEYPAD_REP_DELAY; + keypad_send_key(input-> + u.kbd. + repeat_str, + sizeof + (input-> + u.kbd. + repeat_str)); + } + inputs_stable = 0; /* we will need to come back here soon */ + } + + if (input->high_timer < 255) + input->high_timer++; + } + break; + } else { + /* else signal falling down. Let's fall through. */ + input->state = INPUT_ST_FALLING; + input->fall_timer = 0; + } + /* no break here, fall through */ + case INPUT_ST_FALLING: +#if 0 + /* FIXME !!! same comment as above */ + if (((phys_prev & input->mask) == input->value) + && ((phys_curr & input->mask) > input->value)) { + input->state = INPUT_ST_LOW; /* invalidate */ + break; + } +#endif + + if ((phys_curr & input->mask) == input->value) { + if (input->type == INPUT_TYPE_KBD) { + keypressed = 1; /* will turn on the light */ + + if (input->u.kbd.repeat_str[0]) { + if (input->high_timer >= KEYPAD_REP_START) + input->high_timer -= KEYPAD_REP_DELAY; + keypad_send_key(input->u.kbd.repeat_str, + sizeof(input->u.kbd.repeat_str)); + inputs_stable = 0; /* we will need to come back here soon */ + } + + if (input->high_timer < 255) + input->high_timer++; + } + input->state = INPUT_ST_HIGH; + break; + } else if (input->fall_timer >= input->fall_time) { + /* call release event */ + if (input->type == INPUT_TYPE_STD) { + if (input->u.std.release_fct != NULL) + input->u.std.release_fct(input->u.std.release_data); + + } else if (input->type == INPUT_TYPE_KBD) { + if (input->u.kbd.release_str[0]) + keypad_send_key(input->u.kbd.release_str, + sizeof(input->u.kbd.release_str)); + } + + input->state = INPUT_ST_LOW; + break; + } else { + input->fall_timer++; + inputs_stable = 0; + break; + } + } + } +} + +static void panel_scan_timer(void) +{ + if (keypad_enabled && keypad_initialized) { + if (spin_trylock(&pprt_lock)) { + phys_scan_contacts(); + spin_unlock(&pprt_lock); /* no need for the parport anymore */ + } + + if (!inputs_stable || phys_curr != phys_prev) + panel_process_inputs(); + } + + if (lcd_enabled && lcd_initialized) { + if (keypressed) { + if (light_tempo == 0 && ((lcd_flags & LCD_FLAG_L) == 0)) + lcd_backlight(1); + light_tempo = FLASH_LIGHT_TEMPO; + } else if (light_tempo > 0) { + light_tempo--; + if (light_tempo == 0 && ((lcd_flags & LCD_FLAG_L) == 0)) + lcd_backlight(0); + } + } + + mod_timer(&scan_timer, jiffies + INPUT_POLL_TIME); +} + +static void init_scan_timer(void) +{ + if (scan_timer.function != NULL) + return; /* already started */ + + init_timer(&scan_timer); + scan_timer.expires = jiffies + INPUT_POLL_TIME; + scan_timer.data = 0; + scan_timer.function = (void *)&panel_scan_timer; + add_timer(&scan_timer); +} + +/* converts a name of the form "({BbAaPpSsEe}{01234567-})*" to a series of bits. + * if <omask> or <imask> are non-null, they will be or'ed with the bits corresponding + * to out and in bits respectively. + * returns 1 if ok, 0 if error (in which case, nothing is written). + */ +static int input_name2mask(char *name, pmask_t *mask, pmask_t *value, + char *imask, char *omask) +{ + static char sigtab[10] = "EeSsPpAaBb"; + char im, om; + pmask_t m, v; + + om = im = m = v = 0ULL; + while (*name) { + int in, out, bit, neg; + for (in = 0; (in < sizeof(sigtab)) && (sigtab[in] != *name); in++) + ; + if (in >= sizeof(sigtab)) + return 0; /* input name not found */ + neg = (in & 1); /* odd (lower) names are negated */ + in >>= 1; + im |= (1 << in); + + name++; + if (isdigit(*name)) { + out = *name - '0'; + om |= (1 << out); + } else if (*name == '-') + out = 8; + else + return 0; /* unknown bit name */ + + bit = (out * 5) + in; + + m |= 1ULL << bit; + if (!neg) + v |= 1ULL << bit; + name++; + } + *mask = m; + *value = v; + if (imask) + *imask |= im; + if (omask) + *omask |= om; + return 1; +} + +/* tries to bind a key to the signal name <name>. The key will send the + * strings <press>, <repeat>, <release> for these respective events. + * Returns the pointer to the new key if ok, NULL if the key could not be bound. + */ +static struct logical_input *panel_bind_key(char *name, char *press, + char *repeat, char *release) +{ + struct logical_input *key; + + key = kmalloc(sizeof(struct logical_input), GFP_KERNEL); + if (!key) { + printk(KERN_ERR "panel: not enough memory\n"); + return NULL; + } + memset(key, 0, sizeof(struct logical_input)); + if (!input_name2mask(name, &key->mask, &key->value, &scan_mask_i, + &scan_mask_o)) + return NULL; + + key->type = INPUT_TYPE_KBD; + key->state = INPUT_ST_LOW; + key->rise_time = 1; + key->fall_time = 1; + +#if 0 + printk(KERN_DEBUG "bind: <%s> : m=%016Lx v=%016Lx\n", name, key->mask, + key->value); +#endif + strncpy(key->u.kbd.press_str, press, sizeof(key->u.kbd.press_str)); + strncpy(key->u.kbd.repeat_str, repeat, sizeof(key->u.kbd.repeat_str)); + strncpy(key->u.kbd.release_str, release, + sizeof(key->u.kbd.release_str)); + list_add(&key->list, &logical_inputs); + return key; +} + +#if 0 +/* tries to bind a callback function to the signal name <name>. The function + * <press_fct> will be called with the <press_data> arg when the signal is + * activated, and so on for <release_fct>/<release_data> + * Returns the pointer to the new signal if ok, NULL if the signal could not be bound. + */ +static struct logical_input *panel_bind_callback(char *name, + void (*press_fct) (int), + int press_data, + void (*release_fct) (int), + int release_data) +{ + struct logical_input *callback; + + callback = kmalloc(sizeof(struct logical_input), GFP_KERNEL); + if (!callback) { + printk(KERN_ERR "panel: not enough memory\n"); + return NULL; + } + memset(callback, 0, sizeof(struct logical_input)); + if (!input_name2mask(name, &callback->mask, &callback->value, + &scan_mask_i, &scan_mask_o)) + return NULL; + + callback->type = INPUT_TYPE_STD; + callback->state = INPUT_ST_LOW; + callback->rise_time = 1; + callback->fall_time = 1; + callback->u.std.press_fct = press_fct; + callback->u.std.press_data = press_data; + callback->u.std.release_fct = release_fct; + callback->u.std.release_data = release_data; + list_add(&callback->list, &logical_inputs); + return callback; +} +#endif + +static void keypad_init(void) +{ + int keynum; + init_waitqueue_head(&keypad_read_wait); + keypad_buflen = 0; /* flushes any eventual noisy keystroke */ + + /* Let's create all known keys */ + + for (keynum = 0; keypad_profile[keynum][0][0]; keynum++) { + panel_bind_key(keypad_profile[keynum][0], + keypad_profile[keynum][1], + keypad_profile[keynum][2], + keypad_profile[keynum][3]); + } + + init_scan_timer(); + keypad_initialized = 1; +} + +/**************************************************/ +/* device initialization */ +/**************************************************/ + +static int panel_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (lcd_enabled && lcd_initialized) { + switch (code) { + case SYS_DOWN: + panel_lcd_print + ("\x0cReloading\nSystem...\x1b[Lc\x1b[Lb\x1b[L+"); + break; + case SYS_HALT: + panel_lcd_print + ("\x0cSystem Halted.\x1b[Lc\x1b[Lb\x1b[L+"); + break; + case SYS_POWER_OFF: + panel_lcd_print("\x0cPower off.\x1b[Lc\x1b[Lb\x1b[L+"); + break; + default: + break; + } + } + return NOTIFY_DONE; +} + +static struct notifier_block panel_notifier = { + panel_notify_sys, + NULL, + 0 +}; + +static void panel_attach(struct parport *port) +{ + if (port->number != parport) + return; + + if (pprt) { + printk(KERN_ERR + "panel_attach(): port->number=%d parport=%d, already registered !\n", + port->number, parport); + return; + } + + pprt = parport_register_device(port, "panel", NULL, NULL, /* pf, kf */ + NULL, + /*PARPORT_DEV_EXCL */ + 0, (void *)&pprt); + + if (parport_claim(pprt)) { + printk(KERN_ERR + "Panel: could not claim access to parport%d. Aborting.\n", + parport); + return; + } + + /* must init LCD first, just in case an IRQ from the keypad is generated at keypad init */ + if (lcd_enabled) { + lcd_init(); + misc_register(&lcd_dev); + } + + if (keypad_enabled) { + keypad_init(); + misc_register(&keypad_dev); + } +} + +static void panel_detach(struct parport *port) +{ + if (port->number != parport) + return; + + if (!pprt) { + printk(KERN_ERR + "panel_detach(): port->number=%d parport=%d, nothing to unregister.\n", + port->number, parport); + return; + } + + if (keypad_enabled && keypad_initialized) + misc_deregister(&keypad_dev); + + if (lcd_enabled && lcd_initialized) + misc_deregister(&lcd_dev); + + parport_release(pprt); + parport_unregister_device(pprt); + pprt = NULL; +} + +static struct parport_driver panel_driver = { + .name = "panel", + .attach = panel_attach, + .detach = panel_detach, +}; + +/* init function */ +int panel_init(void) +{ + /* for backwards compatibility */ + if (keypad_type < 0) + keypad_type = keypad_enabled; + + if (lcd_type < 0) + lcd_type = lcd_enabled; + + if (parport < 0) + parport = DEFAULT_PARPORT; + + /* take care of an eventual profile */ + switch (profile) { + case PANEL_PROFILE_CUSTOM: /* custom profile */ + if (keypad_type < 0) + keypad_type = DEFAULT_KEYPAD; + if (lcd_type < 0) + lcd_type = DEFAULT_LCD; + break; + case PANEL_PROFILE_OLD: /* 8 bits, 2*16, old keypad */ + if (keypad_type < 0) + keypad_type = KEYPAD_TYPE_OLD; + if (lcd_type < 0) + lcd_type = LCD_TYPE_OLD; + if (lcd_width < 0) + lcd_width = 16; + if (lcd_hwidth < 0) + lcd_hwidth = 16; + break; + case PANEL_PROFILE_NEW: /* serial, 2*16, new keypad */ + if (keypad_type < 0) + keypad_type = KEYPAD_TYPE_NEW; + if (lcd_type < 0) + lcd_type = LCD_TYPE_KS0074; + break; + case PANEL_PROFILE_HANTRONIX: /* 8 bits, 2*16 hantronix-like, no keypad */ + if (keypad_type < 0) + keypad_type = KEYPAD_TYPE_NONE; + if (lcd_type < 0) + lcd_type = LCD_TYPE_HANTRONIX; + break; + case PANEL_PROFILE_NEXCOM: /* generic 8 bits, 2*16, nexcom keypad, eg. Nexcom. */ + if (keypad_type < 0) + keypad_type = KEYPAD_TYPE_NEXCOM; + if (lcd_type < 0) + lcd_type = LCD_TYPE_NEXCOM; + break; + case PANEL_PROFILE_LARGE: /* 8 bits, 2*40, old keypad */ + if (keypad_type < 0) + keypad_type = KEYPAD_TYPE_OLD; + if (lcd_type < 0) + lcd_type = LCD_TYPE_OLD; + break; + } + + lcd_enabled = (lcd_type > 0); + keypad_enabled = (keypad_type > 0); + + switch (keypad_type) { + case KEYPAD_TYPE_OLD: + keypad_profile = old_keypad_profile; + break; + case KEYPAD_TYPE_NEW: + keypad_profile = new_keypad_profile; + break; + case KEYPAD_TYPE_NEXCOM: + keypad_profile = nexcom_keypad_profile; + break; + default: + keypad_profile = NULL; + break; + } + + /* tells various subsystems about the fact that we are initializing */ + init_in_progress = 1; + + if (parport_register_driver(&panel_driver)) { + printk(KERN_ERR + "Panel: could not register with parport. Aborting.\n"); + return -EIO; + } + + if (!lcd_enabled && !keypad_enabled) { + /* no device enabled, let's release the parport */ + if (pprt) { + parport_release(pprt); + parport_unregister_device(pprt); + } + parport_unregister_driver(&panel_driver); + printk(KERN_ERR "Panel driver version " PANEL_VERSION + " disabled.\n"); + return -ENODEV; + } + + register_reboot_notifier(&panel_notifier); + + if (pprt) + printk(KERN_INFO "Panel driver version " PANEL_VERSION + " registered on parport%d (io=0x%lx).\n", parport, + pprt->port->base); + else + printk(KERN_INFO "Panel driver version " PANEL_VERSION + " not yet registered\n"); + /* tells various subsystems about the fact that initialization is finished */ + init_in_progress = 0; + return 0; +} + +static int __init panel_init_module(void) +{ + return panel_init(); +} + +static void __exit panel_cleanup_module(void) +{ + unregister_reboot_notifier(&panel_notifier); + + if (scan_timer.function != NULL) + del_timer(&scan_timer); + + if (keypad_enabled) + misc_deregister(&keypad_dev); + + if (lcd_enabled) { + panel_lcd_print("\x0cLCD driver " PANEL_VERSION + "\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-"); + misc_deregister(&lcd_dev); + } + + /* TODO: free all input signals */ + + parport_release(pprt); + parport_unregister_device(pprt); + parport_unregister_driver(&panel_driver); +} + +module_init(panel_init_module); +module_exit(panel_cleanup_module); +MODULE_AUTHOR("Willy Tarreau"); +MODULE_LICENSE("GPL"); + +/* + * Local variables: + * c-indent-level: 4 + * tab-width: 8 + * End: + */ |