diff options
Diffstat (limited to 'drivers/staging/rdma/hfi1/hfi.h')
| -rw-r--r-- | drivers/staging/rdma/hfi1/hfi.h | 1821 |
1 files changed, 1821 insertions, 0 deletions
diff --git a/drivers/staging/rdma/hfi1/hfi.h b/drivers/staging/rdma/hfi1/hfi.h new file mode 100644 index 000000000000..8ca171bf3e36 --- /dev/null +++ b/drivers/staging/rdma/hfi1/hfi.h @@ -0,0 +1,1821 @@ +#ifndef _HFI1_KERNEL_H +#define _HFI1_KERNEL_H +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/mutex.h> +#include <linux/list.h> +#include <linux/scatterlist.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/fs.h> +#include <linux/completion.h> +#include <linux/kref.h> +#include <linux/sched.h> +#include <linux/cdev.h> +#include <linux/delay.h> +#include <linux/kthread.h> + +#include "chip_registers.h" +#include "common.h" +#include "verbs.h" +#include "pio.h" +#include "chip.h" +#include "mad.h" +#include "qsfp.h" +#include "platform_config.h" + +/* bumped 1 from s/w major version of TrueScale */ +#define HFI1_CHIP_VERS_MAJ 3U + +/* don't care about this except printing */ +#define HFI1_CHIP_VERS_MIN 0U + +/* The Organization Unique Identifier (Mfg code), and its position in GUID */ +#define HFI1_OUI 0x001175 +#define HFI1_OUI_LSB 40 + +#define DROP_PACKET_OFF 0 +#define DROP_PACKET_ON 1 + +extern unsigned long hfi1_cap_mask; +#define HFI1_CAP_KGET_MASK(mask, cap) ((mask) & HFI1_CAP_##cap) +#define HFI1_CAP_UGET_MASK(mask, cap) \ + (((mask) >> HFI1_CAP_USER_SHIFT) & HFI1_CAP_##cap) +#define HFI1_CAP_KGET(cap) (HFI1_CAP_KGET_MASK(hfi1_cap_mask, cap)) +#define HFI1_CAP_UGET(cap) (HFI1_CAP_UGET_MASK(hfi1_cap_mask, cap)) +#define HFI1_CAP_IS_KSET(cap) (!!HFI1_CAP_KGET(cap)) +#define HFI1_CAP_IS_USET(cap) (!!HFI1_CAP_UGET(cap)) +#define HFI1_MISC_GET() ((hfi1_cap_mask >> HFI1_CAP_MISC_SHIFT) & \ + HFI1_CAP_MISC_MASK) + +/* + * per driver stats, either not device nor port-specific, or + * summed over all of the devices and ports. + * They are described by name via ipathfs filesystem, so layout + * and number of elements can change without breaking compatibility. + * If members are added or deleted hfi1_statnames[] in debugfs.c must + * change to match. + */ +struct hfi1_ib_stats { + __u64 sps_ints; /* number of interrupts handled */ + __u64 sps_errints; /* number of error interrupts */ + __u64 sps_txerrs; /* tx-related packet errors */ + __u64 sps_rcverrs; /* non-crc rcv packet errors */ + __u64 sps_hwerrs; /* hardware errors reported (parity, etc.) */ + __u64 sps_nopiobufs; /* no pio bufs avail from kernel */ + __u64 sps_ctxts; /* number of contexts currently open */ + __u64 sps_lenerrs; /* number of kernel packets where RHF != LRH len */ + __u64 sps_buffull; + __u64 sps_hdrfull; +}; + +extern struct hfi1_ib_stats hfi1_stats; +extern const struct pci_error_handlers hfi1_pci_err_handler; + +/* + * First-cut criterion for "device is active" is + * two thousand dwords combined Tx, Rx traffic per + * 5-second interval. SMA packets are 64 dwords, + * and occur "a few per second", presumably each way. + */ +#define HFI1_TRAFFIC_ACTIVE_THRESHOLD (2000) + +/* + * Below contains all data related to a single context (formerly called port). + */ + +#ifdef CONFIG_DEBUG_FS +struct hfi1_opcode_stats_perctx; +#endif + +/* + * struct ps_state keeps state associated with RX queue "prescanning" + * (prescanning for FECNs, and BECNs), if prescanning is in use. + */ +struct ps_state { + u32 ps_head; + int initialized; +}; + +struct ctxt_eager_bufs { + ssize_t size; /* total size of eager buffers */ + u32 count; /* size of buffers array */ + u32 numbufs; /* number of buffers allocated */ + u32 alloced; /* number of rcvarray entries used */ + u32 rcvtid_size; /* size of each eager rcv tid */ + u32 threshold; /* head update threshold */ + struct eager_buffer { + void *addr; + dma_addr_t phys; + ssize_t len; + } *buffers; + struct { + void *addr; + dma_addr_t phys; + } *rcvtids; +}; + +struct hfi1_ctxtdata { + /* shadow the ctxt's RcvCtrl register */ + u64 rcvctrl; + /* rcvhdrq base, needs mmap before useful */ + void *rcvhdrq; + /* kernel virtual address where hdrqtail is updated */ + volatile __le64 *rcvhdrtail_kvaddr; + /* + * Shared page for kernel to signal user processes that send buffers + * need disarming. The process should call HFI1_CMD_DISARM_BUFS + * or HFI1_CMD_ACK_EVENT with IPATH_EVENT_DISARM_BUFS set. + */ + unsigned long *user_event_mask; + /* when waiting for rcv or pioavail */ + wait_queue_head_t wait; + /* rcvhdrq size (for freeing) */ + size_t rcvhdrq_size; + /* number of rcvhdrq entries */ + u16 rcvhdrq_cnt; + /* size of each of the rcvhdrq entries */ + u16 rcvhdrqentsize; + /* mmap of hdrq, must fit in 44 bits */ + dma_addr_t rcvhdrq_phys; + dma_addr_t rcvhdrqtailaddr_phys; + struct ctxt_eager_bufs egrbufs; + /* this receive context's assigned PIO ACK send context */ + struct send_context *sc; + + /* dynamic receive available interrupt timeout */ + u32 rcvavail_timeout; + /* + * number of opens (including slave sub-contexts) on this instance + * (ignoring forks, dup, etc. for now) + */ + int cnt; + /* + * how much space to leave at start of eager TID entries for + * protocol use, on each TID + */ + /* instead of calculating it */ + unsigned ctxt; + /* non-zero if ctxt is being shared. */ + u16 subctxt_cnt; + /* non-zero if ctxt is being shared. */ + u16 subctxt_id; + u8 uuid[16]; + /* job key */ + u16 jkey; + /* number of RcvArray groups for this context. */ + u32 rcv_array_groups; + /* index of first eager TID entry. */ + u32 eager_base; + /* number of expected TID entries */ + u32 expected_count; + /* index of first expected TID entry. */ + u32 expected_base; + /* cursor into the exp group sets */ + atomic_t tidcursor; + /* number of exp TID groups assigned to the ctxt */ + u16 numtidgroups; + /* size of exp TID group fields in tidusemap */ + u16 tidmapcnt; + /* exp TID group usage bitfield array */ + unsigned long *tidusemap; + /* pinned pages for exp sends, allocated at open */ + struct page **tid_pg_list; + /* dma handles for exp tid pages */ + dma_addr_t *physshadow; + /* lock protecting all Expected TID data */ + spinlock_t exp_lock; + /* number of pio bufs for this ctxt (all procs, if shared) */ + u32 piocnt; + /* first pio buffer for this ctxt */ + u32 pio_base; + /* chip offset of PIO buffers for this ctxt */ + u32 piobufs; + /* per-context configuration flags */ + u16 flags; + /* per-context event flags for fileops/intr communication */ + unsigned long event_flags; + /* WAIT_RCV that timed out, no interrupt */ + u32 rcvwait_to; + /* WAIT_PIO that timed out, no interrupt */ + u32 piowait_to; + /* WAIT_RCV already happened, no wait */ + u32 rcvnowait; + /* WAIT_PIO already happened, no wait */ + u32 pionowait; + /* total number of polled urgent packets */ + u32 urgent; + /* saved total number of polled urgent packets for poll edge trigger */ + u32 urgent_poll; + /* pid of process using this ctxt */ + pid_t pid; + pid_t subpid[HFI1_MAX_SHARED_CTXTS]; + /* same size as task_struct .comm[], command that opened context */ + char comm[16]; + /* so file ops can get at unit */ + struct hfi1_devdata *dd; + /* so functions that need physical port can get it easily */ + struct hfi1_pportdata *ppd; + /* A page of memory for rcvhdrhead, rcvegrhead, rcvegrtail * N */ + void *subctxt_uregbase; + /* An array of pages for the eager receive buffers * N */ + void *subctxt_rcvegrbuf; + /* An array of pages for the eager header queue entries * N */ + void *subctxt_rcvhdr_base; + /* The version of the library which opened this ctxt */ + u32 userversion; + /* Bitmask of active slaves */ + u32 active_slaves; + /* Type of packets or conditions we want to poll for */ + u16 poll_type; + /* receive packet sequence counter */ + u8 seq_cnt; + u8 redirect_seq_cnt; + /* ctxt rcvhdrq head offset */ + u32 head; + u32 pkt_count; + /* QPs waiting for context processing */ + struct list_head qp_wait_list; + /* interrupt handling */ + u64 imask; /* clear interrupt mask */ + int ireg; /* clear interrupt register */ + unsigned numa_id; /* numa node of this context */ + /* verbs stats per CTX */ + struct hfi1_opcode_stats_perctx *opstats; + /* + * This is the kernel thread that will keep making + * progress on the user sdma requests behind the scenes. + * There is one per context (shared contexts use the master's). + */ + struct task_struct *progress; + struct list_head sdma_queues; + spinlock_t sdma_qlock; + +#ifdef CONFIG_PRESCAN_RXQ + struct ps_state ps_state; +#endif /* CONFIG_PRESCAN_RXQ */ + + /* + * The interrupt handler for a particular receive context can vary + * throughout it's lifetime. This is not a lock protected data member so + * it must be updated atomically and the prev and new value must always + * be valid. Worst case is we process an extra interrupt and up to 64 + * packets with the wrong interrupt handler. + */ + void (*do_interrupt)(struct hfi1_ctxtdata *rcd); +}; + +/* + * Represents a single packet at a high level. Put commonly computed things in + * here so we do not have to keep doing them over and over. The rule of thumb is + * if something is used one time to derive some value, store that something in + * here. If it is used multiple times, then store the result of that derivation + * in here. + */ +struct hfi1_packet { + void *ebuf; + void *hdr; + struct hfi1_ctxtdata *rcd; + __le32 *rhf_addr; + struct hfi1_qp *qp; + struct hfi1_other_headers *ohdr; + u64 rhf; + u32 maxcnt; + u32 rhqoff; + u32 hdrqtail; + int numpkt; + u16 tlen; + u16 hlen; + s16 etail; + u16 rsize; + u8 updegr; + u8 rcv_flags; + u8 etype; +}; + +static inline bool has_sc4_bit(struct hfi1_packet *p) +{ + return !!rhf_dc_info(p->rhf); +} + +/* + * Private data for snoop/capture support. + */ +struct hfi1_snoop_data { + int mode_flag; + struct cdev cdev; + struct device *class_dev; + spinlock_t snoop_lock; + struct list_head queue; + wait_queue_head_t waitq; + void *filter_value; + int (*filter_callback)(void *hdr, void *data, void *value); + u64 dcc_cfg; /* saved value of DCC Cfg register */ +}; + +/* snoop mode_flag values */ +#define HFI1_PORT_SNOOP_MODE 1U +#define HFI1_PORT_CAPTURE_MODE 2U + +struct hfi1_sge_state; + +/* + * Get/Set IB link-level config parameters for f_get/set_ib_cfg() + * Mostly for MADs that set or query link parameters, also ipath + * config interfaces + */ +#define HFI1_IB_CFG_LIDLMC 0 /* LID (LS16b) and Mask (MS16b) */ +#define HFI1_IB_CFG_LWID_DG_ENB 1 /* allowed Link-width downgrade */ +#define HFI1_IB_CFG_LWID_ENB 2 /* allowed Link-width */ +#define HFI1_IB_CFG_LWID 3 /* currently active Link-width */ +#define HFI1_IB_CFG_SPD_ENB 4 /* allowed Link speeds */ +#define HFI1_IB_CFG_SPD 5 /* current Link spd */ +#define HFI1_IB_CFG_RXPOL_ENB 6 /* Auto-RX-polarity enable */ +#define HFI1_IB_CFG_LREV_ENB 7 /* Auto-Lane-reversal enable */ +#define HFI1_IB_CFG_LINKLATENCY 8 /* Link Latency (IB1.2 only) */ +#define HFI1_IB_CFG_HRTBT 9 /* IB heartbeat off/enable/auto; DDR/QDR only */ +#define HFI1_IB_CFG_OP_VLS 10 /* operational VLs */ +#define HFI1_IB_CFG_VL_HIGH_CAP 11 /* num of VL high priority weights */ +#define HFI1_IB_CFG_VL_LOW_CAP 12 /* num of VL low priority weights */ +#define HFI1_IB_CFG_OVERRUN_THRESH 13 /* IB overrun threshold */ +#define HFI1_IB_CFG_PHYERR_THRESH 14 /* IB PHY error threshold */ +#define HFI1_IB_CFG_LINKDEFAULT 15 /* IB link default (sleep/poll) */ +#define HFI1_IB_CFG_PKEYS 16 /* update partition keys */ +#define HFI1_IB_CFG_MTU 17 /* update MTU in IBC */ +#define HFI1_IB_CFG_VL_HIGH_LIMIT 19 +#define HFI1_IB_CFG_PMA_TICKS 20 /* PMA sample tick resolution */ +#define HFI1_IB_CFG_PORT 21 /* switch port we are connected to */ + +/* + * HFI or Host Link States + * + * These describe the states the driver thinks the logical and physical + * states are in. Used as an argument to set_link_state(). Implemented + * as bits for easy multi-state checking. The actual state can only be + * one. + */ +#define __HLS_UP_INIT_BP 0 +#define __HLS_UP_ARMED_BP 1 +#define __HLS_UP_ACTIVE_BP 2 +#define __HLS_DN_DOWNDEF_BP 3 /* link down default */ +#define __HLS_DN_POLL_BP 4 +#define __HLS_DN_DISABLE_BP 5 +#define __HLS_DN_OFFLINE_BP 6 +#define __HLS_VERIFY_CAP_BP 7 +#define __HLS_GOING_UP_BP 8 +#define __HLS_GOING_OFFLINE_BP 9 +#define __HLS_LINK_COOLDOWN_BP 10 + +#define HLS_UP_INIT (1 << __HLS_UP_INIT_BP) +#define HLS_UP_ARMED (1 << __HLS_UP_ARMED_BP) +#define HLS_UP_ACTIVE (1 << __HLS_UP_ACTIVE_BP) +#define HLS_DN_DOWNDEF (1 << __HLS_DN_DOWNDEF_BP) /* link down default */ +#define HLS_DN_POLL (1 << __HLS_DN_POLL_BP) +#define HLS_DN_DISABLE (1 << __HLS_DN_DISABLE_BP) +#define HLS_DN_OFFLINE (1 << __HLS_DN_OFFLINE_BP) +#define HLS_VERIFY_CAP (1 << __HLS_VERIFY_CAP_BP) +#define HLS_GOING_UP (1 << __HLS_GOING_UP_BP) +#define HLS_GOING_OFFLINE (1 << __HLS_GOING_OFFLINE_BP) +#define HLS_LINK_COOLDOWN (1 << __HLS_LINK_COOLDOWN_BP) + +#define HLS_UP (HLS_UP_INIT | HLS_UP_ARMED | HLS_UP_ACTIVE) + +/* use this MTU size if none other is given */ +#define HFI1_DEFAULT_ACTIVE_MTU 8192 +/* use this MTU size as the default maximum */ +#define HFI1_DEFAULT_MAX_MTU 8192 +/* default partition key */ +#define DEFAULT_PKEY 0xffff + +/* + * Possible fabric manager config parameters for fm_{get,set}_table() + */ +#define FM_TBL_VL_HIGH_ARB 1 /* Get/set VL high prio weights */ +#define FM_TBL_VL_LOW_ARB 2 /* Get/set VL low prio weights */ +#define FM_TBL_BUFFER_CONTROL 3 /* Get/set Buffer Control */ +#define FM_TBL_SC2VLNT 4 /* Get/set SC->VLnt */ +#define FM_TBL_VL_PREEMPT_ELEMS 5 /* Get (no set) VL preempt elems */ +#define FM_TBL_VL_PREEMPT_MATRIX 6 /* Get (no set) VL preempt matrix */ + +/* + * Possible "operations" for f_rcvctrl(ppd, op, ctxt) + * these are bits so they can be combined, e.g. + * HFI1_RCVCTRL_INTRAVAIL_ENB | HFI1_RCVCTRL_CTXT_ENB + */ +#define HFI1_RCVCTRL_TAILUPD_ENB 0x01 +#define HFI1_RCVCTRL_TAILUPD_DIS 0x02 +#define HFI1_RCVCTRL_CTXT_ENB 0x04 +#define HFI1_RCVCTRL_CTXT_DIS 0x08 +#define HFI1_RCVCTRL_INTRAVAIL_ENB 0x10 +#define HFI1_RCVCTRL_INTRAVAIL_DIS 0x20 +#define HFI1_RCVCTRL_PKEY_ENB 0x40 /* Note, default is enabled */ +#define HFI1_RCVCTRL_PKEY_DIS 0x80 +#define HFI1_RCVCTRL_TIDFLOW_ENB 0x0400 +#define HFI1_RCVCTRL_TIDFLOW_DIS 0x0800 +#define HFI1_RCVCTRL_ONE_PKT_EGR_ENB 0x1000 +#define HFI1_RCVCTRL_ONE_PKT_EGR_DIS 0x2000 +#define HFI1_RCVCTRL_NO_RHQ_DROP_ENB 0x4000 +#define HFI1_RCVCTRL_NO_RHQ_DROP_DIS 0x8000 +#define HFI1_RCVCTRL_NO_EGR_DROP_ENB 0x10000 +#define HFI1_RCVCTRL_NO_EGR_DROP_DIS 0x20000 + +/* partition enforcement flags */ +#define HFI1_PART_ENFORCE_IN 0x1 +#define HFI1_PART_ENFORCE_OUT 0x2 + +/* how often we check for synthetic counter wrap around */ +#define SYNTH_CNT_TIME 2 + +/* Counter flags */ +#define CNTR_NORMAL 0x0 /* Normal counters, just read register */ +#define CNTR_SYNTH 0x1 /* Synthetic counters, saturate at all 1s */ +#define CNTR_DISABLED 0x2 /* Disable this counter */ +#define CNTR_32BIT 0x4 /* Simulate 64 bits for this counter */ +#define CNTR_VL 0x8 /* Per VL counter */ +#define CNTR_INVALID_VL -1 /* Specifies invalid VL */ +#define CNTR_MODE_W 0x0 +#define CNTR_MODE_R 0x1 + +/* VLs Supported/Operational */ +#define HFI1_MIN_VLS_SUPPORTED 1 +#define HFI1_MAX_VLS_SUPPORTED 8 + +static inline void incr_cntr64(u64 *cntr) +{ + if (*cntr < (u64)-1LL) + (*cntr)++; +} + +static inline void incr_cntr32(u32 *cntr) +{ + if (*cntr < (u32)-1LL) + (*cntr)++; +} + +#define MAX_NAME_SIZE 64 +struct hfi1_msix_entry { + struct msix_entry msix; + void *arg; + char name[MAX_NAME_SIZE]; + cpumask_var_t mask; +}; + +/* per-SL CCA information */ +struct cca_timer { + struct hrtimer hrtimer; + struct hfi1_pportdata *ppd; /* read-only */ + int sl; /* read-only */ + u16 ccti; /* read/write - current value of CCTI */ +}; + +struct link_down_reason { + /* + * SMA-facing value. Should be set from .latest when + * HLS_UP_* -> HLS_DN_* transition actually occurs. + */ + u8 sma; + u8 latest; +}; + +enum { + LO_PRIO_TABLE, + HI_PRIO_TABLE, + MAX_PRIO_TABLE +}; + +struct vl_arb_cache { + spinlock_t lock; + struct ib_vl_weight_elem table[VL_ARB_TABLE_SIZE]; +}; + +/* + * The structure below encapsulates data relevant to a physical IB Port. + * Current chips support only one such port, but the separation + * clarifies things a bit. Note that to conform to IB conventions, + * port-numbers are one-based. The first or only port is port1. + */ +struct hfi1_pportdata { + struct hfi1_ibport ibport_data; + + struct hfi1_devdata *dd; + struct kobject pport_cc_kobj; + struct kobject sc2vl_kobj; + struct kobject sl2sc_kobj; + struct kobject vl2mtu_kobj; + + /* QSFP support */ + struct qsfp_data qsfp_info; + + /* GUID for this interface, in host order */ + u64 guid; + /* GUID for peer interface, in host order */ + u64 neighbor_guid; + + /* up or down physical link state */ + u32 linkup; + + /* + * this address is mapped read-only into user processes so they can + * get status cheaply, whenever they want. One qword of status per port + */ + u64 *statusp; + + /* SendDMA related entries */ + + struct workqueue_struct *hfi1_wq; + + /* move out of interrupt context */ + struct work_struct link_vc_work; + struct work_struct link_up_work; + struct work_struct link_down_work; + struct work_struct sma_message_work; + struct work_struct freeze_work; + struct work_struct link_downgrade_work; + struct work_struct link_bounce_work; + /* host link state variables */ + struct mutex hls_lock; + u32 host_link_state; + + spinlock_t sdma_alllock ____cacheline_aligned_in_smp; + + u32 lstate; /* logical link state */ + + /* these are the "32 bit" regs */ + + u32 ibmtu; /* The MTU programmed for this unit */ + /* + * Current max size IB packet (in bytes) including IB headers, that + * we can send. Changes when ibmtu changes. + */ + u32 ibmaxlen; + u32 current_egress_rate; /* units [10^6 bits/sec] */ + /* LID programmed for this instance */ + u16 lid; + /* list of pkeys programmed; 0 if not set */ + u16 pkeys[MAX_PKEY_VALUES]; + u16 link_width_supported; + u16 link_width_downgrade_supported; + u16 link_speed_supported; + u16 link_width_enabled; + u16 link_width_downgrade_enabled; + u16 link_speed_enabled; + u16 link_width_active; + u16 link_width_downgrade_tx_active; + u16 link_width_downgrade_rx_active; + u16 link_speed_active; + u8 vls_supported; + u8 vls_operational; + /* LID mask control */ + u8 lmc; + /* Rx Polarity inversion (compensate for ~tx on partner) */ + u8 rx_pol_inv; + + u8 hw_pidx; /* physical port index */ + u8 port; /* IB port number and index into dd->pports - 1 */ + /* type of neighbor node */ + u8 neighbor_type; + u8 neighbor_normal; + u8 neighbor_fm_security; /* 1 if firmware checking is disabled */ + u8 neighbor_port_number; + u8 is_sm_config_started; + u8 offline_disabled_reason; + u8 is_active_optimize_enabled; + u8 driver_link_ready; /* driver ready for active link */ + u8 link_enabled; /* link enabled? */ + u8 linkinit_reason; + u8 local_tx_rate; /* rate given to 8051 firmware */ + + /* placeholders for IB MAD packet settings */ + u8 overrun_threshold; + u8 phy_error_threshold; + + /* used to override LED behavior */ + u8 led_override; /* Substituted for normal value, if non-zero */ + u16 led_override_timeoff; /* delta to next timer event */ + u8 led_override_vals[2]; /* Alternates per blink-frame */ + u8 led_override_phase; /* Just counts, LSB picks from vals[] */ + atomic_t led_override_timer_active; + /* Used to flash LEDs in override mode */ + struct timer_list led_override_timer; + u32 sm_trap_qp; + u32 sa_qp; + + /* + * cca_timer_lock protects access to the per-SL cca_timer + * structures (specifically the ccti member). + */ + spinlock_t cca_timer_lock ____cacheline_aligned_in_smp; + struct cca_timer cca_timer[OPA_MAX_SLS]; + + /* List of congestion control table entries */ + struct ib_cc_table_entry_shadow ccti_entries[CC_TABLE_SHADOW_MAX]; + + /* congestion entries, each entry corresponding to a SL */ + struct opa_congestion_setting_entry_shadow + congestion_entries[OPA_MAX_SLS]; + + /* + * cc_state_lock protects (write) access to the per-port + * struct cc_state. + */ + spinlock_t cc_state_lock ____cacheline_aligned_in_smp; + + struct cc_state __rcu *cc_state; + + /* Total number of congestion control table entries */ + u16 total_cct_entry; + + /* Bit map identifying service level */ + u32 cc_sl_control_map; + + /* CA's max number of 64 entry units in the congestion control table */ + u8 cc_max_table_entries; + + /* begin congestion log related entries + * cc_log_lock protects all congestion log related data */ + spinlock_t cc_log_lock ____cacheline_aligned_in_smp; + u8 threshold_cong_event_map[OPA_MAX_SLS/8]; + u16 threshold_event_counter; + struct opa_hfi1_cong_log_event_internal cc_events[OPA_CONG_LOG_ELEMS]; + int cc_log_idx; /* index for logging events */ + int cc_mad_idx; /* index for reporting events */ + /* end congestion log related entries */ + + struct vl_arb_cache vl_arb_cache[MAX_PRIO_TABLE]; + + /* port relative counter buffer */ + u64 *cntrs; + /* port relative synthetic counter buffer */ + u64 *scntrs; + /* we synthesize port_xmit_discards from several egress errors */ + u64 port_xmit_discards; + u64 port_xmit_constraint_errors; + u64 port_rcv_constraint_errors; + /* count of 'link_err' interrupts from DC */ + u64 link_downed; + /* number of times link retrained successfully */ + u64 link_up; + /* port_ltp_crc_mode is returned in 'portinfo' MADs */ + u16 port_ltp_crc_mode; + /* port_crc_mode_enabled is the crc we support */ + u8 port_crc_mode_enabled; + /* mgmt_allowed is also returned in 'portinfo' MADs */ + u8 mgmt_allowed; + u8 part_enforce; /* partition enforcement flags */ + struct link_down_reason local_link_down_reason; + struct link_down_reason neigh_link_down_reason; + /* Value to be sent to link peer on LinkDown .*/ + u8 remote_link_down_reason; + /* Error events that will cause a port bounce. */ + u32 port_error_action; +}; + +typedef int (*rhf_rcv_function_ptr)(struct hfi1_packet *packet); + +typedef void (*opcode_handler)(struct hfi1_packet *packet); + +/* return values for the RHF receive functions */ +#define RHF_RCV_CONTINUE 0 /* keep going */ +#define RHF_RCV_DONE 1 /* stop, this packet processed */ +#define RHF_RCV_REPROCESS 2 /* stop. retain this packet */ + +struct rcv_array_data { + u8 group_size; + u16 ngroups; + u16 nctxt_extra; +}; + +struct per_vl_data { + u16 mtu; + struct send_context *sc; +}; + +/* 16 to directly index */ +#define PER_VL_SEND_CONTEXTS 16 + +struct err_info_rcvport { + u8 status_and_code; + u64 packet_flit1; + u64 packet_flit2; +}; + +struct err_info_constraint { + u8 status; + u16 pkey; + u32 slid; +}; + +struct hfi1_temp { + unsigned int curr; /* current temperature */ + unsigned int lo_lim; /* low temperature limit */ + unsigned int hi_lim; /* high temperature limit */ + unsigned int crit_lim; /* critical temperature limit */ + u8 triggers; /* temperature triggers */ +}; + +/* device data struct now contains only "general per-device" info. + * fields related to a physical IB port are in a hfi1_pportdata struct. + */ +struct sdma_engine; +struct sdma_vl_map; + +#define BOARD_VERS_MAX 96 /* how long the version string can be */ +#define SERIAL_MAX 16 /* length of the serial number */ + +struct hfi1_devdata { + struct hfi1_ibdev verbs_dev; /* must be first */ + struct list_head list; + /* pointers to related structs for this device */ + /* pci access data structure */ + struct pci_dev *pcidev; + struct cdev user_cdev; + struct cdev diag_cdev; + struct cdev ui_cdev; + struct device *user_device; + struct device *diag_device; + struct device *ui_device; + + /* mem-mapped pointer to base of chip regs */ + u8 __iomem *kregbase; + /* end of mem-mapped chip space excluding sendbuf and user regs */ + u8 __iomem *kregend; + /* physical address of chip for io_remap, etc. */ + resource_size_t physaddr; + /* receive context data */ + struct hfi1_ctxtdata **rcd; + /* send context data */ + struct send_context_info *send_contexts; + /* map hardware send contexts to software index */ + u8 *hw_to_sw; + /* spinlock for allocating and releasing send context resources */ + spinlock_t sc_lock; + /* Per VL data. Enough for all VLs but not all elements are set/used. */ + struct per_vl_data vld[PER_VL_SEND_CONTEXTS]; + /* seqlock for sc2vl */ + seqlock_t sc2vl_lock; + u64 sc2vl[4]; + /* Send Context initialization lock. */ + spinlock_t sc_init_lock; + + /* fields common to all SDMA engines */ + + /* default flags to last descriptor */ + u64 default_desc1; + volatile __le64 *sdma_heads_dma; /* DMA'ed by chip */ + dma_addr_t sdma_heads_phys; + void *sdma_pad_dma; /* DMA'ed by chip */ + dma_addr_t sdma_pad_phys; + /* for deallocation */ + size_t sdma_heads_size; + /* number from the chip */ + u32 chip_sdma_engines; + /* num used */ + u32 num_sdma; + /* lock for sdma_map */ + spinlock_t sde_map_lock; + /* array of engines sized by num_sdma */ + struct sdma_engine *per_sdma; + /* array of vl maps */ + struct sdma_vl_map __rcu *sdma_map; + /* SPC freeze waitqueue and variable */ + wait_queue_head_t sdma_unfreeze_wq; + atomic_t sdma_unfreeze_count; + + + /* hfi1_pportdata, points to array of (physical) port-specific + * data structs, indexed by pidx (0..n-1) + */ + struct hfi1_pportdata *pport; + + /* mem-mapped pointer to base of PIO buffers */ + void __iomem *piobase; + /* + * write-combining mem-mapped pointer to base of RcvArray + * memory. + */ + void __iomem *rcvarray_wc; + /* + * credit return base - a per-NUMA range of DMA address that + * the chip will use to update the per-context free counter + */ + struct credit_return_base *cr_base; + + /* send context numbers and sizes for each type */ + struct sc_config_sizes sc_sizes[SC_MAX]; + + u32 lcb_access_count; /* count of LCB users */ + + char *boardname; /* human readable board info */ + + /* device (not port) flags, basically device capabilities */ + u32 flags; + + /* reset value */ + u64 z_int_counter; + u64 z_rcv_limit; + /* percpu int_counter */ + u64 __percpu *int_counter; + u64 __percpu *rcv_limit; + + /* number of receive contexts in use by the driver */ + u32 num_rcv_contexts; + /* number of pio send contexts in use by the driver */ + u32 num_send_contexts; + /* + * number of ctxts available for PSM open + */ + u32 freectxts; + /* base receive interrupt timeout, in CSR units */ + u32 rcv_intr_timeout_csr; + + u64 __iomem *egrtidbase; + spinlock_t sendctrl_lock; /* protect changes to SendCtrl */ + spinlock_t rcvctrl_lock; /* protect changes to RcvCtrl */ + /* around rcd and (user ctxts) ctxt_cnt use (intr vs free) */ + spinlock_t uctxt_lock; /* rcd and user context changes */ + /* exclusive access to 8051 */ + spinlock_t dc8051_lock; + /* exclusive access to 8051 memory */ + spinlock_t dc8051_memlock; + int dc8051_timed_out; /* remember if the 8051 timed out */ + /* + * A page that will hold event notification bitmaps for all + * contexts. This page will be mapped into all processes. + */ + unsigned long *events; + /* + * per unit status, see also portdata statusp + * mapped read-only into user processes so they can get unit and + * IB link status cheaply + */ + struct hfi1_status *status; + u32 freezelen; /* max length of freezemsg */ + + /* revision register shadow */ + u64 revision; + /* Base GUID for device (network order) */ + u64 base_guid; + + /* these are the "32 bit" regs */ + + /* value we put in kr_rcvhdrsize */ + u32 rcvhdrsize; + /* number of receive contexts the chip supports */ + u32 chip_rcv_contexts; + /* number of receive array entries */ + u32 chip_rcv_array_count; + /* number of PIO send contexts the chip supports */ + u32 chip_send_contexts; + /* number of bytes in the PIO memory buffer */ + u32 chip_pio_mem_size; + /* number of bytes in the SDMA memory buffer */ + u32 chip_sdma_mem_size; + + /* size of each rcvegrbuffer */ + u32 rcvegrbufsize; + /* log2 of above */ + u16 rcvegrbufsize_shift; + /* both sides of the PCIe link are gen3 capable */ + u8 link_gen3_capable; + /* localbus width (1, 2,4,8,16,32) from config space */ + u32 lbus_width; + /* localbus speed in MHz */ + u32 lbus_speed; + int unit; /* unit # of this chip */ + int node; /* home node of this chip */ + + /* save these PCI fields to restore after a reset */ + u32 pcibar0; + u32 pcibar1; + u32 pci_rom; + u16 pci_command; + u16 pcie_devctl; + u16 pcie_lnkctl; + u16 pcie_devctl2; + u32 pci_msix0; + u32 pci_lnkctl3; + u32 pci_tph2; + + /* + * ASCII serial number, from flash, large enough for original + * all digit strings, and longer serial number format + */ + u8 serial[SERIAL_MAX]; + /* human readable board version */ + u8 boardversion[BOARD_VERS_MAX]; + u8 lbus_info[32]; /* human readable localbus info */ + /* chip major rev, from CceRevision */ + u8 majrev; + /* chip minor rev, from CceRevision */ + u8 minrev; + /* hardware ID */ + u8 hfi1_id; + /* implementation code */ + u8 icode; + /* default link down value (poll/sleep) */ + u8 link_default; + /* vAU of this device */ + u8 vau; + /* vCU of this device */ + u8 vcu; + /* link credits of this device */ + u16 link_credits; + /* initial vl15 credits to use */ + u16 vl15_init; + + /* Misc small ints */ + /* Number of physical ports available */ + u8 num_pports; + /* Lowest context number which can be used by user processes */ + u8 first_user_ctxt; + u8 n_krcv_queues; + u8 qos_shift; + u8 qpn_mask; + + u16 rhf_offset; /* offset of RHF within receive header entry */ + u16 irev; /* implementation revision */ + u16 dc8051_ver; /* 8051 firmware version */ + + struct platform_config_cache pcfg_cache; + /* control high-level access to qsfp */ + struct mutex qsfp_i2c_mutex; + + struct diag_client *diag_client; + spinlock_t hfi1_diag_trans_lock; /* protect diag observer ops */ + + u8 psxmitwait_supported; + /* cycle length of PS* counters in HW (in picoseconds) */ + u16 psxmitwait_check_rate; + /* high volume overflow errors deferred to tasklet */ + struct tasklet_struct error_tasklet; + /* per device cq worker */ + struct kthread_worker *worker; + + /* MSI-X information */ + struct hfi1_msix_entry *msix_entries; + u32 num_msix_entries; + + /* INTx information */ + u32 requested_intx_irq; /* did we request one? */ + char intx_name[MAX_NAME_SIZE]; /* INTx name */ + + /* general interrupt: mask of handled interrupts */ + u64 gi_mask[CCE_NUM_INT_CSRS]; + + struct rcv_array_data rcv_entries; + + /* + * 64 bit synthetic counters + */ + struct timer_list synth_stats_timer; + + /* + * device counters + */ + char *cntrnames; + size_t cntrnameslen; + size_t ndevcntrs; + u64 *cntrs; + u64 *scntrs; + + /* + * remembered values for synthetic counters + */ + u64 last_tx; + u64 last_rx; + + /* + * per-port counters + */ + size_t nportcntrs; + char *portcntrnames; + size_t portcntrnameslen; + + struct hfi1_snoop_data hfi1_snoop; + + struct err_info_rcvport err_info_rcvport; + struct err_info_constraint err_info_rcv_constraint; + struct err_info_constraint err_info_xmit_constraint; + u8 err_info_uncorrectable; + u8 err_info_fmconfig; + + atomic_t drop_packet; + u8 do_drop; + + /* receive interrupt functions */ + rhf_rcv_function_ptr *rhf_rcv_function_map; + rhf_rcv_function_ptr normal_rhf_rcv_functions[8]; + + /* + * Handlers for outgoing data so that snoop/capture does not + * have to have its hooks in the send path + */ + int (*process_pio_send)(struct hfi1_qp *qp, struct ahg_ib_header *ibhdr, + u32 hdrwords, struct hfi1_sge_state *ss, + u32 len, u32 plen, u32 dwords, u64 pbc); + int (*process_dma_send)(struct hfi1_qp *qp, struct ahg_ib_header *ibhdr, + u32 hdrwords, struct hfi1_sge_state *ss, + u32 len, u32 plen, u32 dwords, u64 pbc); + void (*pio_inline_send)(struct hfi1_devdata *dd, struct pio_buf *pbuf, + u64 pbc, const void *from, size_t count); + + /* OUI comes from the HW. Used everywhere as 3 separate bytes. */ + u8 oui1; + u8 oui2; + u8 oui3; + /* Timer and counter used to detect RcvBufOvflCnt changes */ + struct timer_list rcverr_timer; + u32 rcv_ovfl_cnt; + + int assigned_node_id; + wait_queue_head_t event_queue; + + /* Save the enabled LCB error bits */ + u64 lcb_err_en; + u8 dc_shutdown; +}; + +/* 8051 firmware version helper */ +#define dc8051_ver(a, b) ((a) << 8 | (b)) + +/* f_put_tid types */ +#define PT_EXPECTED 0 +#define PT_EAGER 1 +#define PT_INVALID 2 + +/* Private data for file operations */ +struct hfi1_filedata { + struct hfi1_ctxtdata *uctxt; + unsigned subctxt; + struct hfi1_user_sdma_comp_q *cq; + struct hfi1_user_sdma_pkt_q *pq; + /* for cpu affinity; -1 if none */ + int rec_cpu_num; +}; + +extern struct list_head hfi1_dev_list; +extern spinlock_t hfi1_devs_lock; +struct hfi1_devdata *hfi1_lookup(int unit); +extern u32 hfi1_cpulist_count; +extern unsigned long *hfi1_cpulist; + +extern unsigned int snoop_drop_send; +extern unsigned int snoop_force_capture; +int hfi1_init(struct hfi1_devdata *, int); +int hfi1_count_units(int *npresentp, int *nupp); +int hfi1_count_active_units(void); + +int hfi1_diag_add(struct hfi1_devdata *); +void hfi1_diag_remove(struct hfi1_devdata *); +void handle_linkup_change(struct hfi1_devdata *dd, u32 linkup); + +void handle_user_interrupt(struct hfi1_ctxtdata *rcd); + +int hfi1_create_rcvhdrq(struct hfi1_devdata *, struct hfi1_ctxtdata *); +int hfi1_setup_eagerbufs(struct hfi1_ctxtdata *); +int hfi1_create_ctxts(struct hfi1_devdata *dd); +struct hfi1_ctxtdata *hfi1_create_ctxtdata(struct hfi1_pportdata *, u32); +void hfi1_init_pportdata(struct pci_dev *, struct hfi1_pportdata *, + struct hfi1_devdata *, u8, u8); +void hfi1_free_ctxtdata(struct hfi1_devdata *, struct hfi1_ctxtdata *); + +void handle_receive_interrupt(struct hfi1_ctxtdata *); +void handle_receive_interrupt_nodma_rtail(struct hfi1_ctxtdata *rcd); +void handle_receive_interrupt_dma_rtail(struct hfi1_ctxtdata *rcd); +int hfi1_reset_device(int); + +/* return the driver's idea of the logical OPA port state */ +static inline u32 driver_lstate(struct hfi1_pportdata *ppd) +{ + return ppd->lstate; /* use the cached value */ +} + +static inline u16 generate_jkey(kuid_t uid) +{ + return from_kuid(current_user_ns(), uid) & 0xffff; +} + +/* + * active_egress_rate + * + * returns the active egress rate in units of [10^6 bits/sec] + */ +static inline u32 active_egress_rate(struct hfi1_pportdata *ppd) +{ + u16 link_speed = ppd->link_speed_active; + u16 link_width = ppd->link_width_active; + u32 egress_rate; + + if (link_speed == OPA_LINK_SPEED_25G) + egress_rate = 25000; + else /* assume OPA_LINK_SPEED_12_5G */ + egress_rate = 12500; + + switch (link_width) { + case OPA_LINK_WIDTH_4X: + egress_rate *= 4; + break; + case OPA_LINK_WIDTH_3X: + egress_rate *= 3; + break; + case OPA_LINK_WIDTH_2X: + egress_rate *= 2; + break; + default: + /* assume IB_WIDTH_1X */ + break; + } + + return egress_rate; +} + +/* + * egress_cycles + * + * Returns the number of 'fabric clock cycles' to egress a packet + * of length 'len' bytes, at 'rate' Mbit/s. Since the fabric clock + * rate is (approximately) 805 MHz, the units of the returned value + * are (1/805 MHz). + */ +static inline u32 egress_cycles(u32 len, u32 rate) +{ + u32 cycles; + + /* + * cycles is: + * + * (length) [bits] / (rate) [bits/sec] + * --------------------------------------------------- + * fabric_clock_period == 1 /(805 * 10^6) [cycles/sec] + */ + + cycles = len * 8; /* bits */ + cycles *= 805; + cycles /= rate; + + return cycles; +} + +void set_link_ipg(struct hfi1_pportdata *ppd); +void process_becn(struct hfi1_pportdata *ppd, u8 sl, u16 rlid, u32 lqpn, + u32 rqpn, u8 svc_type); +void return_cnp(struct hfi1_ibport *ibp, struct hfi1_qp *qp, u32 remote_qpn, + u32 pkey, u32 slid, u32 dlid, u8 sc5, + const struct ib_grh *old_grh); + +#define PACKET_EGRESS_TIMEOUT 350 +static inline void pause_for_credit_return(struct hfi1_devdata *dd) +{ + /* Pause at least 1us, to ensure chip returns all credits */ + u32 usec = cclock_to_ns(dd, PACKET_EGRESS_TIMEOUT) / 1000; + + udelay(usec ? usec : 1); +} + +/** + * sc_to_vlt() reverse lookup sc to vl + * @dd - devdata + * @sc5 - 5 bit sc + */ +static inline u8 sc_to_vlt(struct hfi1_devdata *dd, u8 sc5) +{ + unsigned seq; + u8 rval; + + if (sc5 >= OPA_MAX_SCS) + return (u8)(0xff); + + do { + seq = read_seqbegin(&dd->sc2vl_lock); + rval = *(((u8 *)dd->sc2vl) + sc5); + } while (read_seqretry(&dd->sc2vl_lock, seq)); + + return rval; +} + +#define PKEY_MEMBER_MASK 0x8000 +#define PKEY_LOW_15_MASK 0x7fff + +/* + * ingress_pkey_matches_entry - return 1 if the pkey matches ent (ent + * being an entry from the ingress partition key table), return 0 + * otherwise. Use the matching criteria for ingress partition keys + * specified in the OPAv1 spec., section 9.10.14. + */ +static inline int ingress_pkey_matches_entry(u16 pkey, u16 ent) +{ + u16 mkey = pkey & PKEY_LOW_15_MASK; + u16 ment = ent & PKEY_LOW_15_MASK; + + if (mkey == ment) { + /* + * If pkey[15] is clear (limited partition member), + * is bit 15 in the corresponding table element + * clear (limited member)? + */ + if (!(pkey & PKEY_MEMBER_MASK)) + return !!(ent & PKEY_MEMBER_MASK); + return 1; + } + return 0; +} + +/* + * ingress_pkey_table_search - search the entire pkey table for + * an entry which matches 'pkey'. return 0 if a match is found, + * and 1 otherwise. + */ +static int ingress_pkey_table_search(struct hfi1_pportdata *ppd, u16 pkey) +{ + int i; + + for (i = 0; i < MAX_PKEY_VALUES; i++) { + if (ingress_pkey_matches_entry(pkey, ppd->pkeys[i])) + return 0; + } + return 1; +} + +/* + * ingress_pkey_table_fail - record a failure of ingress pkey validation, + * i.e., increment port_rcv_constraint_errors for the port, and record + * the 'error info' for this failure. + */ +static void ingress_pkey_table_fail(struct hfi1_pportdata *ppd, u16 pkey, + u16 slid) +{ + struct hfi1_devdata *dd = ppd->dd; + + incr_cntr64(&ppd->port_rcv_constraint_errors); + if (!(dd->err_info_rcv_constraint.status & OPA_EI_STATUS_SMASK)) { + dd->err_info_rcv_constraint.status |= OPA_EI_STATUS_SMASK; + dd->err_info_rcv_constraint.slid = slid; + dd->err_info_rcv_constraint.pkey = pkey; + } +} + +/* + * ingress_pkey_check - Return 0 if the ingress pkey is valid, return 1 + * otherwise. Use the criteria in the OPAv1 spec, section 9.10.14. idx + * is a hint as to the best place in the partition key table to begin + * searching. This function should not be called on the data path because + * of performance reasons. On datapath pkey check is expected to be done + * by HW and rcv_pkey_check function should be called instead. + */ +static inline int ingress_pkey_check(struct hfi1_pportdata *ppd, u16 pkey, + u8 sc5, u8 idx, u16 slid) +{ + if (!(ppd->part_enforce & HFI1_PART_ENFORCE_IN)) + return 0; + + /* If SC15, pkey[0:14] must be 0x7fff */ + if ((sc5 == 0xf) && ((pkey & PKEY_LOW_15_MASK) != PKEY_LOW_15_MASK)) + goto bad; + + /* Is the pkey = 0x0, or 0x8000? */ + if ((pkey & PKEY_LOW_15_MASK) == 0) + goto bad; + + /* The most likely matching pkey has index 'idx' */ + if (ingress_pkey_matches_entry(pkey, ppd->pkeys[idx])) + return 0; + + /* no match - try the whole table */ + if (!ingress_pkey_table_search(ppd, pkey)) + return 0; + +bad: + ingress_pkey_table_fail(ppd, pkey, slid); + return 1; +} + +/* + * rcv_pkey_check - Return 0 if the ingress pkey is valid, return 1 + * otherwise. It only ensures pkey is vlid for QP0. This function + * should be called on the data path instead of ingress_pkey_check + * as on data path, pkey check is done by HW (except for QP0). + */ +static inline int rcv_pkey_check(struct hfi1_pportdata *ppd, u16 pkey, + u8 sc5, u16 slid) +{ + if (!(ppd->part_enforce & HFI1_PART_ENFORCE_IN)) + return 0; + + /* If SC15, pkey[0:14] must be 0x7fff */ + if ((sc5 == 0xf) && ((pkey & PKEY_LOW_15_MASK) != PKEY_LOW_15_MASK)) + goto bad; + + return 0; +bad: + ingress_pkey_table_fail(ppd, pkey, slid); + return 1; +} + +/* MTU handling */ + +/* MTU enumeration, 256-4k match IB */ +#define OPA_MTU_0 0 +#define OPA_MTU_256 1 +#define OPA_MTU_512 2 +#define OPA_MTU_1024 3 +#define OPA_MTU_2048 4 +#define OPA_MTU_4096 5 + +u32 lrh_max_header_bytes(struct hfi1_devdata *dd); +int mtu_to_enum(u32 mtu, int default_if_bad); +u16 enum_to_mtu(int); +static inline int valid_ib_mtu(unsigned int mtu) +{ + return mtu == 256 || mtu == 512 || + mtu == 1024 || mtu == 2048 || + mtu == 4096; +} +static inline int valid_opa_max_mtu(unsigned int mtu) +{ + return mtu >= 2048 && + (valid_ib_mtu(mtu) || mtu == 8192 || mtu == 10240); +} + +int set_mtu(struct hfi1_pportdata *); + +int hfi1_set_lid(struct hfi1_pportdata *, u32, u8); +void hfi1_disable_after_error(struct hfi1_devdata *); +int hfi1_set_uevent_bits(struct hfi1_pportdata *, const int); +int hfi1_rcvbuf_validate(u32, u8, u16 *); + +int fm_get_table(struct hfi1_pportdata *, int, void *); +int fm_set_table(struct hfi1_pportdata *, int, void *); + +void set_up_vl15(struct hfi1_devdata *dd, u8 vau, u16 vl15buf); +void reset_link_credits(struct hfi1_devdata *dd); +void assign_remote_cm_au_table(struct hfi1_devdata *dd, u8 vcu); + +int snoop_recv_handler(struct hfi1_packet *packet); +int snoop_send_dma_handler(struct hfi1_qp *qp, struct ahg_ib_header *ibhdr, + u32 hdrwords, struct hfi1_sge_state *ss, u32 len, + u32 plen, u32 dwords, u64 pbc); +int snoop_send_pio_handler(struct hfi1_qp *qp, struct ahg_ib_header *ibhdr, + u32 hdrwords, struct hfi1_sge_state *ss, u32 len, + u32 plen, u32 dwords, u64 pbc); +void snoop_inline_pio_send(struct hfi1_devdata *dd, struct pio_buf *pbuf, + u64 pbc, const void *from, size_t count); + +/* for use in system calls, where we want to know device type, etc. */ +#define ctxt_fp(fp) \ + (((struct hfi1_filedata *)(fp)->private_data)->uctxt) +#define subctxt_fp(fp) \ + (((struct hfi1_filedata *)(fp)->private_data)->subctxt) +#define tidcursor_fp(fp) \ + (((struct hfi1_filedata *)(fp)->private_data)->tidcursor) +#define user_sdma_pkt_fp(fp) \ + (((struct hfi1_filedata *)(fp)->private_data)->pq) +#define user_sdma_comp_fp(fp) \ + (((struct hfi1_filedata *)(fp)->private_data)->cq) + +static inline struct hfi1_devdata *dd_from_ppd(struct hfi1_pportdata *ppd) +{ + return ppd->dd; +} + +static inline struct hfi1_devdata *dd_from_dev(struct hfi1_ibdev *dev) +{ + return container_of(dev, struct hfi1_devdata, verbs_dev); +} + +static inline struct hfi1_devdata *dd_from_ibdev(struct ib_device *ibdev) +{ + return dd_from_dev(to_idev(ibdev)); +} + +static inline struct hfi1_pportdata *ppd_from_ibp(struct hfi1_ibport *ibp) +{ + return container_of(ibp, struct hfi1_pportdata, ibport_data); +} + +static inline struct hfi1_ibport *to_iport(struct ib_device *ibdev, u8 port) +{ + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + unsigned pidx = port - 1; /* IB number port from 1, hdw from 0 */ + + WARN_ON(pidx >= dd->num_pports); + return &dd->pport[pidx].ibport_data; +} + +/* + * Return the indexed PKEY from the port PKEY table. + */ +static inline u16 hfi1_get_pkey(struct hfi1_ibport *ibp, unsigned index) +{ + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + u16 ret; + + if (index >= ARRAY_SIZE(ppd->pkeys)) + ret = 0; + else + ret = ppd->pkeys[index]; + + return ret; +} + +/* + * Readers of cc_state must call get_cc_state() under rcu_read_lock(). + * Writers of cc_state must call get_cc_state() under cc_state_lock. + */ +static inline struct cc_state *get_cc_state(struct hfi1_pportdata *ppd) +{ + return rcu_dereference(ppd->cc_state); +} + +/* + * values for dd->flags (_device_ related flags) + */ +#define HFI1_INITTED 0x1 /* chip and driver up and initted */ +#define HFI1_PRESENT 0x2 /* chip accesses can be done */ +#define HFI1_FROZEN 0x4 /* chip in SPC freeze */ +#define HFI1_HAS_SDMA_TIMEOUT 0x8 +#define HFI1_HAS_SEND_DMA 0x10 /* Supports Send DMA */ +#define HFI1_FORCED_FREEZE 0x80 /* driver forced freeze mode */ +#define HFI1_DO_INIT_ASIC 0x100 /* This device will init the ASIC */ + +/* IB dword length mask in PBC (lower 11 bits); same for all chips */ +#define HFI1_PBC_LENGTH_MASK ((1 << 11) - 1) + + +/* ctxt_flag bit offsets */ + /* context has been setup */ +#define HFI1_CTXT_SETUP_DONE 1 + /* waiting for a packet to arrive */ +#define HFI1_CTXT_WAITING_RCV 2 + /* master has not finished initializing */ +#define HFI1_CTXT_MASTER_UNINIT 4 + /* waiting for an urgent packet to arrive */ +#define HFI1_CTXT_WAITING_URG 5 + +/* free up any allocated data at closes */ +struct hfi1_devdata *hfi1_init_dd(struct pci_dev *, + const struct pci_device_id *); +void hfi1_free_devdata(struct hfi1_devdata *); +void cc_state_reclaim(struct rcu_head *rcu); +struct hfi1_devdata *hfi1_alloc_devdata(struct pci_dev *pdev, size_t extra); + +/* + * Set LED override, only the two LSBs have "public" meaning, but + * any non-zero value substitutes them for the Link and LinkTrain + * LED states. + */ +#define HFI1_LED_PHYS 1 /* Physical (linktraining) GREEN LED */ +#define HFI1_LED_LOG 2 /* Logical (link) YELLOW LED */ +void hfi1_set_led_override(struct hfi1_pportdata *ppd, unsigned int val); + +#define HFI1_CREDIT_RETURN_RATE (100) + +/* + * The number of words for the KDETH protocol field. If this is + * larger then the actual field used, then part of the payload + * will be in the header. + * + * Optimally, we want this sized so that a typical case will + * use full cache lines. The typical local KDETH header would + * be: + * + * Bytes Field + * 8 LRH + * 12 BHT + * ?? KDETH + * 8 RHF + * --- + * 28 + KDETH + * + * For a 64-byte cache line, KDETH would need to be 36 bytes or 9 DWORDS + */ +#define DEFAULT_RCVHDRSIZE 9 + +/* + * Maximal header byte count: + * + * Bytes Field + * 8 LRH + * 40 GRH (optional) + * 12 BTH + * ?? KDETH + * 8 RHF + * --- + * 68 + KDETH + * + * We also want to maintain a cache line alignment to assist DMA'ing + * of the header bytes. Round up to a good size. + */ +#define DEFAULT_RCVHDR_ENTSIZE 32 + +int hfi1_get_user_pages(unsigned long, size_t, struct page **); +void hfi1_release_user_pages(struct page **, size_t); + +static inline void clear_rcvhdrtail(const struct hfi1_ctxtdata *rcd) +{ + *((u64 *) rcd->rcvhdrtail_kvaddr) = 0ULL; +} + +static inline u32 get_rcvhdrtail(const struct hfi1_ctxtdata *rcd) +{ + /* + * volatile because it's a DMA target from the chip, routine is + * inlined, and don't want register caching or reordering. + */ + return (u32) le64_to_cpu(*rcd->rcvhdrtail_kvaddr); +} + +/* + * sysfs interface. + */ + +extern const char ib_hfi1_version[]; + +int hfi1_device_create(struct hfi1_devdata *); +void hfi1_device_remove(struct hfi1_devdata *); + +int hfi1_create_port_files(struct ib_device *ibdev, u8 port_num, + struct kobject *kobj); +int hfi1_verbs_register_sysfs(struct hfi1_devdata *); +void hfi1_verbs_unregister_sysfs(struct hfi1_devdata *); +/* Hook for sysfs read of QSFP */ +int qsfp_dump(struct hfi1_pportdata *ppd, char *buf, int len); + +int hfi1_pcie_init(struct pci_dev *, const struct pci_device_id *); +void hfi1_pcie_cleanup(struct pci_dev *); +int hfi1_pcie_ddinit(struct hfi1_devdata *, struct pci_dev *, + const struct pci_device_id *); +void hfi1_pcie_ddcleanup(struct hfi1_devdata *); +void hfi1_pcie_flr(struct hfi1_devdata *); +int pcie_speeds(struct hfi1_devdata *); +void request_msix(struct hfi1_devdata *, u32 *, struct hfi1_msix_entry *); +void hfi1_enable_intx(struct pci_dev *); +void hfi1_nomsix(struct hfi1_devdata *); +void restore_pci_variables(struct hfi1_devdata *dd); +int do_pcie_gen3_transition(struct hfi1_devdata *dd); +int parse_platform_config(struct hfi1_devdata *dd); +int get_platform_config_field(struct hfi1_devdata *dd, + enum platform_config_table_type_encoding table_type, + int table_index, int field_index, u32 *data, u32 len); + +dma_addr_t hfi1_map_page(struct pci_dev *, struct page *, unsigned long, + size_t, int); +const char *get_unit_name(int unit); + +/* + * Flush write combining store buffers (if present) and perform a write + * barrier. + */ +static inline void flush_wc(void) +{ + asm volatile("sfence" : : : "memory"); +} + +void handle_eflags(struct hfi1_packet *packet); +int process_receive_ib(struct hfi1_packet *packet); +int process_receive_bypass(struct hfi1_packet *packet); +int process_receive_error(struct hfi1_packet *packet); +int kdeth_process_expected(struct hfi1_packet *packet); +int kdeth_process_eager(struct hfi1_packet *packet); +int process_receive_invalid(struct hfi1_packet *packet); + +extern rhf_rcv_function_ptr snoop_rhf_rcv_functions[8]; + +void update_sge(struct hfi1_sge_state *ss, u32 length); + +/* global module parameter variables */ +extern unsigned int hfi1_max_mtu; +extern unsigned int hfi1_cu; +extern unsigned int user_credit_return_threshold; +extern uint num_rcv_contexts; +extern unsigned n_krcvqs; +extern u8 krcvqs[]; +extern int krcvqsset; +extern uint kdeth_qp; +extern uint loopback; +extern uint quick_linkup; +extern uint rcv_intr_timeout; +extern uint rcv_intr_count; +extern uint rcv_intr_dynamic; +extern ushort link_crc_mask; + +extern struct mutex hfi1_mutex; + +/* Number of seconds before our card status check... */ +#define STATUS_TIMEOUT 60 + +#define DRIVER_NAME "hfi1" +#define HFI1_USER_MINOR_BASE 0 +#define HFI1_TRACE_MINOR 127 +#define HFI1_DIAGPKT_MINOR 128 +#define HFI1_DIAG_MINOR_BASE 129 +#define HFI1_SNOOP_CAPTURE_BASE 200 +#define HFI1_NMINORS 255 + +#define PCI_VENDOR_ID_INTEL 0x8086 +#define PCI_DEVICE_ID_INTEL0 0x24f0 +#define PCI_DEVICE_ID_INTEL1 0x24f1 + +#define HFI1_PKT_USER_SC_INTEGRITY \ + (SEND_CTXT_CHECK_ENABLE_DISALLOW_NON_KDETH_PACKETS_SMASK \ + | SEND_CTXT_CHECK_ENABLE_DISALLOW_BYPASS_SMASK \ + | SEND_CTXT_CHECK_ENABLE_DISALLOW_GRH_SMASK) + +#define HFI1_PKT_KERNEL_SC_INTEGRITY \ + (SEND_CTXT_CHECK_ENABLE_DISALLOW_KDETH_PACKETS_SMASK) + +static inline u64 hfi1_pkt_default_send_ctxt_mask(struct hfi1_devdata *dd, + u16 ctxt_type) +{ + u64 base_sc_integrity = + SEND_CTXT_CHECK_ENABLE_DISALLOW_BYPASS_BAD_PKT_LEN_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_LONG_BYPASS_PACKETS_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_LONG_IB_PACKETS_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_BAD_PKT_LEN_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_TEST_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_SMALL_BYPASS_PACKETS_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_SMALL_IB_PACKETS_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_RAW_IPV6_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_RAW_SMASK + | SEND_CTXT_CHECK_ENABLE_CHECK_BYPASS_VL_MAPPING_SMASK + | SEND_CTXT_CHECK_ENABLE_CHECK_VL_MAPPING_SMASK + | SEND_CTXT_CHECK_ENABLE_CHECK_OPCODE_SMASK + | SEND_CTXT_CHECK_ENABLE_CHECK_SLID_SMASK + | SEND_CTXT_CHECK_ENABLE_CHECK_JOB_KEY_SMASK + | SEND_CTXT_CHECK_ENABLE_CHECK_VL_SMASK + | SEND_CTXT_CHECK_ENABLE_CHECK_ENABLE_SMASK; + + if (ctxt_type == SC_USER) + base_sc_integrity |= HFI1_PKT_USER_SC_INTEGRITY; + else + base_sc_integrity |= HFI1_PKT_KERNEL_SC_INTEGRITY; + + if (is_a0(dd)) + /* turn off send-side job key checks - A0 erratum */ + return base_sc_integrity & + ~SEND_CTXT_CHECK_ENABLE_CHECK_JOB_KEY_SMASK; + return base_sc_integrity; +} + +static inline u64 hfi1_pkt_base_sdma_integrity(struct hfi1_devdata *dd) +{ + u64 base_sdma_integrity = + SEND_DMA_CHECK_ENABLE_DISALLOW_BYPASS_BAD_PKT_LEN_SMASK + | SEND_DMA_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK + | SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_LONG_BYPASS_PACKETS_SMASK + | SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_LONG_IB_PACKETS_SMASK + | SEND_DMA_CHECK_ENABLE_DISALLOW_BAD_PKT_LEN_SMASK + | SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_SMALL_BYPASS_PACKETS_SMASK + | SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_SMALL_IB_PACKETS_SMASK + | SEND_DMA_CHECK_ENABLE_DISALLOW_RAW_IPV6_SMASK + | SEND_DMA_CHECK_ENABLE_DISALLOW_RAW_SMASK + | SEND_DMA_CHECK_ENABLE_CHECK_BYPASS_VL_MAPPING_SMASK + | SEND_DMA_CHECK_ENABLE_CHECK_VL_MAPPING_SMASK + | SEND_DMA_CHECK_ENABLE_CHECK_OPCODE_SMASK + | SEND_DMA_CHECK_ENABLE_CHECK_SLID_SMASK + | SEND_DMA_CHECK_ENABLE_CHECK_JOB_KEY_SMASK + | SEND_DMA_CHECK_ENABLE_CHECK_VL_SMASK + | SEND_DMA_CHECK_ENABLE_CHECK_ENABLE_SMASK; + + if (is_a0(dd)) + /* turn off send-side job key checks - A0 erratum */ + return base_sdma_integrity & + ~SEND_DMA_CHECK_ENABLE_CHECK_JOB_KEY_SMASK; + return base_sdma_integrity; +} + +/* + * hfi1_early_err is used (only!) to print early errors before devdata is + * allocated, or when dd->pcidev may not be valid, and at the tail end of + * cleanup when devdata may have been freed, etc. hfi1_dev_porterr is + * the same as dd_dev_err, but is used when the message really needs + * the IB port# to be definitive as to what's happening.. + */ +#define hfi1_early_err(dev, fmt, ...) \ + dev_err(dev, fmt, ##__VA_ARGS__) + +#define hfi1_early_info(dev, fmt, ...) \ + dev_info(dev, fmt, ##__VA_ARGS__) + +#define dd_dev_emerg(dd, fmt, ...) \ + dev_emerg(&(dd)->pcidev->dev, "%s: " fmt, \ + get_unit_name((dd)->unit), ##__VA_ARGS__) +#define dd_dev_err(dd, fmt, ...) \ + dev_err(&(dd)->pcidev->dev, "%s: " fmt, \ + get_unit_name((dd)->unit), ##__VA_ARGS__) +#define dd_dev_warn(dd, fmt, ...) \ + dev_warn(&(dd)->pcidev->dev, "%s: " fmt, \ + get_unit_name((dd)->unit), ##__VA_ARGS__) + +#define dd_dev_warn_ratelimited(dd, fmt, ...) \ + dev_warn_ratelimited(&(dd)->pcidev->dev, "%s: " fmt, \ + get_unit_name((dd)->unit), ##__VA_ARGS__) + +#define dd_dev_info(dd, fmt, ...) \ + dev_info(&(dd)->pcidev->dev, "%s: " fmt, \ + get_unit_name((dd)->unit), ##__VA_ARGS__) + +#define hfi1_dev_porterr(dd, port, fmt, ...) \ + dev_err(&(dd)->pcidev->dev, "%s: IB%u:%u " fmt, \ + get_unit_name((dd)->unit), (dd)->unit, (port), \ + ##__VA_ARGS__) + +/* + * this is used for formatting hw error messages... + */ +struct hfi1_hwerror_msgs { + u64 mask; + const char *msg; + size_t sz; +}; + +/* in intr.c... */ +void hfi1_format_hwerrors(u64 hwerrs, + const struct hfi1_hwerror_msgs *hwerrmsgs, + size_t nhwerrmsgs, char *msg, size_t lmsg); + +#define USER_OPCODE_CHECK_VAL 0xC0 +#define USER_OPCODE_CHECK_MASK 0xC0 +#define OPCODE_CHECK_VAL_DISABLED 0x0 +#define OPCODE_CHECK_MASK_DISABLED 0x0 + +static inline void hfi1_reset_cpu_counters(struct hfi1_devdata *dd) +{ + struct hfi1_pportdata *ppd; + int i; + + dd->z_int_counter = get_all_cpu_total(dd->int_counter); + dd->z_rcv_limit = get_all_cpu_total(dd->rcv_limit); + + ppd = (struct hfi1_pportdata *)(dd + 1); + for (i = 0; i < dd->num_pports; i++, ppd++) { + ppd->ibport_data.z_rc_acks = + get_all_cpu_total(ppd->ibport_data.rc_acks); + ppd->ibport_data.z_rc_qacks = + get_all_cpu_total(ppd->ibport_data.rc_qacks); + } +} + +/* Control LED state */ +static inline void setextled(struct hfi1_devdata *dd, u32 on) +{ + if (on) + write_csr(dd, DCC_CFG_LED_CNTRL, 0x1F); + else + write_csr(dd, DCC_CFG_LED_CNTRL, 0x10); +} + +int hfi1_tempsense_rd(struct hfi1_devdata *dd, struct hfi1_temp *temp); + +#endif /* _HFI1_KERNEL_H */ |