diff options
Diffstat (limited to 'drivers/staging/rdma/ipath/ipath_driver.c')
| -rw-r--r-- | drivers/staging/rdma/ipath/ipath_driver.c | 2784 |
1 files changed, 0 insertions, 2784 deletions
diff --git a/drivers/staging/rdma/ipath/ipath_driver.c b/drivers/staging/rdma/ipath/ipath_driver.c deleted file mode 100644 index 2ab22f98e3ba..000000000000 --- a/drivers/staging/rdma/ipath/ipath_driver.c +++ /dev/null @@ -1,2784 +0,0 @@ -/* - * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved. - * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/spinlock.h> -#include <linux/idr.h> -#include <linux/pci.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/vmalloc.h> -#include <linux/bitmap.h> -#include <linux/slab.h> -#include <linux/module.h> -#ifdef CONFIG_X86_64 -#include <asm/pat.h> -#endif - -#include "ipath_kernel.h" -#include "ipath_verbs.h" - -static void ipath_update_pio_bufs(struct ipath_devdata *); - -const char *ipath_get_unit_name(int unit) -{ - static char iname[16]; - snprintf(iname, sizeof iname, "infinipath%u", unit); - return iname; -} - -#define DRIVER_LOAD_MSG "QLogic " IPATH_DRV_NAME " loaded: " -#define PFX IPATH_DRV_NAME ": " - -/* - * The size has to be longer than this string, so we can append - * board/chip information to it in the init code. - */ -const char ib_ipath_version[] = IPATH_IDSTR "\n"; - -static struct idr unit_table; -DEFINE_SPINLOCK(ipath_devs_lock); -LIST_HEAD(ipath_dev_list); - -wait_queue_head_t ipath_state_wait; - -unsigned ipath_debug = __IPATH_INFO; - -module_param_named(debug, ipath_debug, uint, S_IWUSR | S_IRUGO); -MODULE_PARM_DESC(debug, "mask for debug prints"); -EXPORT_SYMBOL_GPL(ipath_debug); - -unsigned ipath_mtu4096 = 1; /* max 4KB IB mtu by default, if supported */ -module_param_named(mtu4096, ipath_mtu4096, uint, S_IRUGO); -MODULE_PARM_DESC(mtu4096, "enable MTU of 4096 bytes, if supported"); - -static unsigned ipath_hol_timeout_ms = 13000; -module_param_named(hol_timeout_ms, ipath_hol_timeout_ms, uint, S_IRUGO); -MODULE_PARM_DESC(hol_timeout_ms, - "duration of user app suspension after link failure"); - -unsigned ipath_linkrecovery = 1; -module_param_named(linkrecovery, ipath_linkrecovery, uint, S_IWUSR | S_IRUGO); -MODULE_PARM_DESC(linkrecovery, "enable workaround for link recovery issue"); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("QLogic <support@qlogic.com>"); -MODULE_DESCRIPTION("QLogic InfiniPath driver"); - -/* - * Table to translate the LINKTRAININGSTATE portion of - * IBCStatus to a human-readable form. - */ -const char *ipath_ibcstatus_str[] = { - "Disabled", - "LinkUp", - "PollActive", - "PollQuiet", - "SleepDelay", - "SleepQuiet", - "LState6", /* unused */ - "LState7", /* unused */ - "CfgDebounce", - "CfgRcvfCfg", - "CfgWaitRmt", - "CfgIdle", - "RecovRetrain", - "CfgTxRevLane", /* unused before IBA7220 */ - "RecovWaitRmt", - "RecovIdle", - /* below were added for IBA7220 */ - "CfgEnhanced", - "CfgTest", - "CfgWaitRmtTest", - "CfgWaitCfgEnhanced", - "SendTS_T", - "SendTstIdles", - "RcvTS_T", - "SendTst_TS1s", - "LTState18", "LTState19", "LTState1A", "LTState1B", - "LTState1C", "LTState1D", "LTState1E", "LTState1F" -}; - -static void ipath_remove_one(struct pci_dev *); -static int ipath_init_one(struct pci_dev *, const struct pci_device_id *); - -/* Only needed for registration, nothing else needs this info */ -#define PCI_VENDOR_ID_PATHSCALE 0x1fc1 -#define PCI_DEVICE_ID_INFINIPATH_HT 0xd - -/* Number of seconds before our card status check... */ -#define STATUS_TIMEOUT 60 - -static const struct pci_device_id ipath_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) }, - { 0, } -}; - -MODULE_DEVICE_TABLE(pci, ipath_pci_tbl); - -static struct pci_driver ipath_driver = { - .name = IPATH_DRV_NAME, - .probe = ipath_init_one, - .remove = ipath_remove_one, - .id_table = ipath_pci_tbl, - .driver = { - .groups = ipath_driver_attr_groups, - }, -}; - -static inline void read_bars(struct ipath_devdata *dd, struct pci_dev *dev, - u32 *bar0, u32 *bar1) -{ - int ret; - - ret = pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); - if (ret) - ipath_dev_err(dd, "failed to read bar0 before enable: " - "error %d\n", -ret); - - ret = pci_read_config_dword(dev, PCI_BASE_ADDRESS_1, bar1); - if (ret) - ipath_dev_err(dd, "failed to read bar1 before enable: " - "error %d\n", -ret); - - ipath_dbg("Read bar0 %x bar1 %x\n", *bar0, *bar1); -} - -static void ipath_free_devdata(struct pci_dev *pdev, - struct ipath_devdata *dd) -{ - unsigned long flags; - - pci_set_drvdata(pdev, NULL); - - if (dd->ipath_unit != -1) { - spin_lock_irqsave(&ipath_devs_lock, flags); - idr_remove(&unit_table, dd->ipath_unit); - list_del(&dd->ipath_list); - spin_unlock_irqrestore(&ipath_devs_lock, flags); - } - vfree(dd); -} - -static struct ipath_devdata *ipath_alloc_devdata(struct pci_dev *pdev) -{ - unsigned long flags; - struct ipath_devdata *dd; - int ret; - - dd = vzalloc(sizeof(*dd)); - if (!dd) { - dd = ERR_PTR(-ENOMEM); - goto bail; - } - dd->ipath_unit = -1; - - idr_preload(GFP_KERNEL); - spin_lock_irqsave(&ipath_devs_lock, flags); - - ret = idr_alloc(&unit_table, dd, 0, 0, GFP_NOWAIT); - if (ret < 0) { - printk(KERN_ERR IPATH_DRV_NAME - ": Could not allocate unit ID: error %d\n", -ret); - ipath_free_devdata(pdev, dd); - dd = ERR_PTR(ret); - goto bail_unlock; - } - dd->ipath_unit = ret; - - dd->pcidev = pdev; - pci_set_drvdata(pdev, dd); - - list_add(&dd->ipath_list, &ipath_dev_list); - -bail_unlock: - spin_unlock_irqrestore(&ipath_devs_lock, flags); - idr_preload_end(); -bail: - return dd; -} - -static inline struct ipath_devdata *__ipath_lookup(int unit) -{ - return idr_find(&unit_table, unit); -} - -struct ipath_devdata *ipath_lookup(int unit) -{ - struct ipath_devdata *dd; - unsigned long flags; - - spin_lock_irqsave(&ipath_devs_lock, flags); - dd = __ipath_lookup(unit); - spin_unlock_irqrestore(&ipath_devs_lock, flags); - - return dd; -} - -int ipath_count_units(int *npresentp, int *nupp, int *maxportsp) -{ - int nunits, npresent, nup; - struct ipath_devdata *dd; - unsigned long flags; - int maxports; - - nunits = npresent = nup = maxports = 0; - - spin_lock_irqsave(&ipath_devs_lock, flags); - - list_for_each_entry(dd, &ipath_dev_list, ipath_list) { - nunits++; - if ((dd->ipath_flags & IPATH_PRESENT) && dd->ipath_kregbase) - npresent++; - if (dd->ipath_lid && - !(dd->ipath_flags & (IPATH_DISABLED | IPATH_LINKDOWN - | IPATH_LINKUNK))) - nup++; - if (dd->ipath_cfgports > maxports) - maxports = dd->ipath_cfgports; - } - - spin_unlock_irqrestore(&ipath_devs_lock, flags); - - if (npresentp) - *npresentp = npresent; - if (nupp) - *nupp = nup; - if (maxportsp) - *maxportsp = maxports; - - return nunits; -} - -/* - * These next two routines are placeholders in case we don't have per-arch - * code for controlling write combining. If explicit control of write - * combining is not available, performance will probably be awful. - */ - -int __attribute__((weak)) ipath_enable_wc(struct ipath_devdata *dd) -{ - return -EOPNOTSUPP; -} - -void __attribute__((weak)) ipath_disable_wc(struct ipath_devdata *dd) -{ -} - -/* - * Perform a PIO buffer bandwidth write test, to verify proper system - * configuration. Even when all the setup calls work, occasionally - * BIOS or other issues can prevent write combining from working, or - * can cause other bandwidth problems to the chip. - * - * This test simply writes the same buffer over and over again, and - * measures close to the peak bandwidth to the chip (not testing - * data bandwidth to the wire). On chips that use an address-based - * trigger to send packets to the wire, this is easy. On chips that - * use a count to trigger, we want to make sure that the packet doesn't - * go out on the wire, or trigger flow control checks. - */ -static void ipath_verify_pioperf(struct ipath_devdata *dd) -{ - u32 pbnum, cnt, lcnt; - u32 __iomem *piobuf; - u32 *addr; - u64 msecs, emsecs; - - piobuf = ipath_getpiobuf(dd, 0, &pbnum); - if (!piobuf) { - dev_info(&dd->pcidev->dev, - "No PIObufs for checking perf, skipping\n"); - return; - } - - /* - * Enough to give us a reasonable test, less than piobuf size, and - * likely multiple of store buffer length. - */ - cnt = 1024; - - addr = vmalloc(cnt); - if (!addr) { - dev_info(&dd->pcidev->dev, - "Couldn't get memory for checking PIO perf," - " skipping\n"); - goto done; - } - - preempt_disable(); /* we want reasonably accurate elapsed time */ - msecs = 1 + jiffies_to_msecs(jiffies); - for (lcnt = 0; lcnt < 10000U; lcnt++) { - /* wait until we cross msec boundary */ - if (jiffies_to_msecs(jiffies) >= msecs) - break; - udelay(1); - } - - ipath_disable_armlaunch(dd); - - /* - * length 0, no dwords actually sent, and mark as VL15 - * on chips where that may matter (due to IB flowcontrol) - */ - if ((dd->ipath_flags & IPATH_HAS_PBC_CNT)) - writeq(1UL << 63, piobuf); - else - writeq(0, piobuf); - ipath_flush_wc(); - - /* - * this is only roughly accurate, since even with preempt we - * still take interrupts that could take a while. Running for - * >= 5 msec seems to get us "close enough" to accurate values - */ - msecs = jiffies_to_msecs(jiffies); - for (emsecs = lcnt = 0; emsecs <= 5UL; lcnt++) { - __iowrite32_copy(piobuf + 64, addr, cnt >> 2); - emsecs = jiffies_to_msecs(jiffies) - msecs; - } - - /* 1 GiB/sec, slightly over IB SDR line rate */ - if (lcnt < (emsecs * 1024U)) - ipath_dev_err(dd, - "Performance problem: bandwidth to PIO buffers is " - "only %u MiB/sec\n", - lcnt / (u32) emsecs); - else - ipath_dbg("PIO buffer bandwidth %u MiB/sec is OK\n", - lcnt / (u32) emsecs); - - preempt_enable(); - - vfree(addr); - -done: - /* disarm piobuf, so it's available again */ - ipath_disarm_piobufs(dd, pbnum, 1); - ipath_enable_armlaunch(dd); -} - -static void cleanup_device(struct ipath_devdata *dd); - -static int ipath_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - int ret, len, j; - struct ipath_devdata *dd; - unsigned long long addr; - u32 bar0 = 0, bar1 = 0; - -#ifdef CONFIG_X86_64 - if (pat_enabled()) { - pr_warn("ipath needs PAT disabled, boot with nopat kernel parameter\n"); - ret = -ENODEV; - goto bail; - } -#endif - - dd = ipath_alloc_devdata(pdev); - if (IS_ERR(dd)) { - ret = PTR_ERR(dd); - printk(KERN_ERR IPATH_DRV_NAME - ": Could not allocate devdata: error %d\n", -ret); - goto bail; - } - - ipath_cdbg(VERBOSE, "initializing unit #%u\n", dd->ipath_unit); - - ret = pci_enable_device(pdev); - if (ret) { - /* This can happen iff: - * - * We did a chip reset, and then failed to reprogram the - * BAR, or the chip reset due to an internal error. We then - * unloaded the driver and reloaded it. - * - * Both reset cases set the BAR back to initial state. For - * the latter case, the AER sticky error bit at offset 0x718 - * should be set, but the Linux kernel doesn't yet know - * about that, it appears. If the original BAR was retained - * in the kernel data structures, this may be OK. - */ - ipath_dev_err(dd, "enable unit %d failed: error %d\n", - dd->ipath_unit, -ret); - goto bail_devdata; - } - addr = pci_resource_start(pdev, 0); - len = pci_resource_len(pdev, 0); - ipath_cdbg(VERBOSE, "regbase (0) %llx len %d irq %d, vend %x/%x " - "driver_data %lx\n", addr, len, pdev->irq, ent->vendor, - ent->device, ent->driver_data); - - read_bars(dd, pdev, &bar0, &bar1); - - if (!bar1 && !(bar0 & ~0xf)) { - if (addr) { - dev_info(&pdev->dev, "BAR is 0 (probable RESET), " - "rewriting as %llx\n", addr); - ret = pci_write_config_dword( - pdev, PCI_BASE_ADDRESS_0, addr); - if (ret) { - ipath_dev_err(dd, "rewrite of BAR0 " - "failed: err %d\n", -ret); - goto bail_disable; - } - ret = pci_write_config_dword( - pdev, PCI_BASE_ADDRESS_1, addr >> 32); - if (ret) { - ipath_dev_err(dd, "rewrite of BAR1 " - "failed: err %d\n", -ret); - goto bail_disable; - } - } else { - ipath_dev_err(dd, "BAR is 0 (probable RESET), " - "not usable until reboot\n"); - ret = -ENODEV; - goto bail_disable; - } - } - - ret = pci_request_regions(pdev, IPATH_DRV_NAME); - if (ret) { - dev_info(&pdev->dev, "pci_request_regions unit %u fails: " - "err %d\n", dd->ipath_unit, -ret); - goto bail_disable; - } - - ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); - if (ret) { - /* - * if the 64 bit setup fails, try 32 bit. Some systems - * do not setup 64 bit maps on systems with 2GB or less - * memory installed. - */ - ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); - if (ret) { - dev_info(&pdev->dev, - "Unable to set DMA mask for unit %u: %d\n", - dd->ipath_unit, ret); - goto bail_regions; - } else { - ipath_dbg("No 64bit DMA mask, used 32 bit mask\n"); - ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); - if (ret) - dev_info(&pdev->dev, - "Unable to set DMA consistent mask " - "for unit %u: %d\n", - dd->ipath_unit, ret); - - } - } else { - ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); - if (ret) - dev_info(&pdev->dev, - "Unable to set DMA consistent mask " - "for unit %u: %d\n", - dd->ipath_unit, ret); - } - - pci_set_master(pdev); - - /* - * Save BARs to rewrite after device reset. Save all 64 bits of - * BAR, just in case. - */ - dd->ipath_pcibar0 = addr; - dd->ipath_pcibar1 = addr >> 32; - dd->ipath_deviceid = ent->device; /* save for later use */ - dd->ipath_vendorid = ent->vendor; - - /* setup the chip-specific functions, as early as possible. */ - switch (ent->device) { - case PCI_DEVICE_ID_INFINIPATH_HT: - ipath_init_iba6110_funcs(dd); - break; - - default: - ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, " - "failing\n", ent->device); - return -ENODEV; - } - - for (j = 0; j < 6; j++) { - if (!pdev->resource[j].start) - continue; - ipath_cdbg(VERBOSE, "BAR %d %pR, len %llx\n", - j, &pdev->resource[j], - (unsigned long long)pci_resource_len(pdev, j)); - } - - if (!addr) { - ipath_dev_err(dd, "No valid address in BAR 0!\n"); - ret = -ENODEV; - goto bail_regions; - } - - dd->ipath_pcirev = pdev->revision; - -#if defined(__powerpc__) - /* There isn't a generic way to specify writethrough mappings */ - dd->ipath_kregbase = __ioremap(addr, len, - (_PAGE_NO_CACHE|_PAGE_WRITETHRU)); -#else - /* XXX: split this properly to enable on PAT */ - dd->ipath_kregbase = ioremap_nocache(addr, len); -#endif - - if (!dd->ipath_kregbase) { - ipath_dbg("Unable to map io addr %llx to kvirt, failing\n", - addr); - ret = -ENOMEM; - goto bail_iounmap; - } - dd->ipath_kregend = (u64 __iomem *) - ((void __iomem *)dd->ipath_kregbase + len); - dd->ipath_physaddr = addr; /* used for io_remap, etc. */ - /* for user mmap */ - ipath_cdbg(VERBOSE, "mapped io addr %llx to kregbase %p\n", - addr, dd->ipath_kregbase); - - if (dd->ipath_f_bus(dd, pdev)) - ipath_dev_err(dd, "Failed to setup config space; " - "continuing anyway\n"); - - /* - * set up our interrupt handler; IRQF_SHARED probably not needed, - * since MSI interrupts shouldn't be shared but won't hurt for now. - * check 0 irq after we return from chip-specific bus setup, since - * that can affect this due to setup - */ - if (!dd->ipath_irq) - ipath_dev_err(dd, "irq is 0, BIOS error? Interrupts won't " - "work\n"); - else { - ret = request_irq(dd->ipath_irq, ipath_intr, IRQF_SHARED, - IPATH_DRV_NAME, dd); - if (ret) { - ipath_dev_err(dd, "Couldn't setup irq handler, " - "irq=%d: %d\n", dd->ipath_irq, ret); - goto bail_iounmap; - } - } - - ret = ipath_init_chip(dd, 0); /* do the chip-specific init */ - if (ret) - goto bail_irqsetup; - - ret = ipath_enable_wc(dd); - - if (ret) - ret = 0; - - ipath_verify_pioperf(dd); - - ipath_device_create_group(&pdev->dev, dd); - ipathfs_add_device(dd); - ipath_user_add(dd); - ipath_diag_add(dd); - ipath_register_ib_device(dd); - - goto bail; - -bail_irqsetup: - cleanup_device(dd); - - if (dd->ipath_irq) - dd->ipath_f_free_irq(dd); - - if (dd->ipath_f_cleanup) - dd->ipath_f_cleanup(dd); - -bail_iounmap: - iounmap((volatile void __iomem *) dd->ipath_kregbase); - -bail_regions: - pci_release_regions(pdev); - -bail_disable: - pci_disable_device(pdev); - -bail_devdata: - ipath_free_devdata(pdev, dd); - -bail: - return ret; -} - -static void cleanup_device(struct ipath_devdata *dd) -{ - int port; - struct ipath_portdata **tmp; - unsigned long flags; - - if (*dd->ipath_statusp & IPATH_STATUS_CHIP_PRESENT) { - /* can't do anything more with chip; needs re-init */ - *dd->ipath_statusp &= ~IPATH_STATUS_CHIP_PRESENT; - if (dd->ipath_kregbase) { - /* - * if we haven't already cleaned up before these are - * to ensure any register reads/writes "fail" until - * re-init - */ - dd->ipath_kregbase = NULL; - dd->ipath_uregbase = 0; - dd->ipath_sregbase = 0; - dd->ipath_cregbase = 0; - dd->ipath_kregsize = 0; - } - ipath_disable_wc(dd); - } - - if (dd->ipath_spectriggerhit) - dev_info(&dd->pcidev->dev, "%lu special trigger hits\n", - dd->ipath_spectriggerhit); - - if (dd->ipath_pioavailregs_dma) { - dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE, - (void *) dd->ipath_pioavailregs_dma, - dd->ipath_pioavailregs_phys); - dd->ipath_pioavailregs_dma = NULL; - } - if (dd->ipath_dummy_hdrq) { - dma_free_coherent(&dd->pcidev->dev, - dd->ipath_pd[0]->port_rcvhdrq_size, - dd->ipath_dummy_hdrq, dd->ipath_dummy_hdrq_phys); - dd->ipath_dummy_hdrq = NULL; - } - - if (dd->ipath_pageshadow) { - struct page **tmpp = dd->ipath_pageshadow; - dma_addr_t *tmpd = dd->ipath_physshadow; - int i, cnt = 0; - - ipath_cdbg(VERBOSE, "Unlocking any expTID pages still " - "locked\n"); - for (port = 0; port < dd->ipath_cfgports; port++) { - int port_tidbase = port * dd->ipath_rcvtidcnt; - int maxtid = port_tidbase + dd->ipath_rcvtidcnt; - for (i = port_tidbase; i < maxtid; i++) { - if (!tmpp[i]) - continue; - pci_unmap_page(dd->pcidev, tmpd[i], - PAGE_SIZE, PCI_DMA_FROMDEVICE); - ipath_release_user_pages(&tmpp[i], 1); - tmpp[i] = NULL; - cnt++; - } - } - if (cnt) { - ipath_stats.sps_pageunlocks += cnt; - ipath_cdbg(VERBOSE, "There were still %u expTID " - "entries locked\n", cnt); - } - if (ipath_stats.sps_pagelocks || - ipath_stats.sps_pageunlocks) - ipath_cdbg(VERBOSE, "%llu pages locked, %llu " - "unlocked via ipath_m{un}lock\n", - (unsigned long long) - ipath_stats.sps_pagelocks, - (unsigned long long) - ipath_stats.sps_pageunlocks); - - ipath_cdbg(VERBOSE, "Free shadow page tid array at %p\n", - dd->ipath_pageshadow); - tmpp = dd->ipath_pageshadow; - dd->ipath_pageshadow = NULL; - vfree(tmpp); - - dd->ipath_egrtidbase = NULL; - } - - /* - * free any resources still in use (usually just kernel ports) - * at unload; we do for portcnt, because that's what we allocate. - * We acquire lock to be really paranoid that ipath_pd isn't being - * accessed from some interrupt-related code (that should not happen, - * but best to be sure). - */ - spin_lock_irqsave(&dd->ipath_uctxt_lock, flags); - tmp = dd->ipath_pd; - dd->ipath_pd = NULL; - spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags); - for (port = 0; port < dd->ipath_portcnt; port++) { - struct ipath_portdata *pd = tmp[port]; - tmp[port] = NULL; /* debugging paranoia */ - ipath_free_pddata(dd, pd); - } - kfree(tmp); -} - -static void ipath_remove_one(struct pci_dev *pdev) -{ - struct ipath_devdata *dd = pci_get_drvdata(pdev); - - ipath_cdbg(VERBOSE, "removing, pdev=%p, dd=%p\n", pdev, dd); - - /* - * disable the IB link early, to be sure no new packets arrive, which - * complicates the shutdown process - */ - ipath_shutdown_device(dd); - - flush_workqueue(ib_wq); - - if (dd->verbs_dev) - ipath_unregister_ib_device(dd->verbs_dev); - - ipath_diag_remove(dd); - ipath_user_remove(dd); - ipathfs_remove_device(dd); - ipath_device_remove_group(&pdev->dev, dd); - - ipath_cdbg(VERBOSE, "Releasing pci memory regions, dd %p, " - "unit %u\n", dd, (u32) dd->ipath_unit); - - cleanup_device(dd); - - /* - * turn off rcv, send, and interrupts for all ports, all drivers - * should also hard reset the chip here? - * free up port 0 (kernel) rcvhdr, egr bufs, and eventually tid bufs - * for all versions of the driver, if they were allocated - */ - if (dd->ipath_irq) { - ipath_cdbg(VERBOSE, "unit %u free irq %d\n", - dd->ipath_unit, dd->ipath_irq); - dd->ipath_f_free_irq(dd); - } else - ipath_dbg("irq is 0, not doing free_irq " - "for unit %u\n", dd->ipath_unit); - /* - * we check for NULL here, because it's outside - * the kregbase check, and we need to call it - * after the free_irq. Thus it's possible that - * the function pointers were never initialized. - */ - if (dd->ipath_f_cleanup) - /* clean up chip-specific stuff */ - dd->ipath_f_cleanup(dd); - - ipath_cdbg(VERBOSE, "Unmapping kregbase %p\n", dd->ipath_kregbase); - iounmap((volatile void __iomem *) dd->ipath_kregbase); - pci_release_regions(pdev); - ipath_cdbg(VERBOSE, "calling pci_disable_device\n"); - pci_disable_device(pdev); - - ipath_free_devdata(pdev, dd); -} - -/* general driver use */ -DEFINE_MUTEX(ipath_mutex); - -static DEFINE_SPINLOCK(ipath_pioavail_lock); - -/** - * ipath_disarm_piobufs - cancel a range of PIO buffers - * @dd: the infinipath device - * @first: the first PIO buffer to cancel - * @cnt: the number of PIO buffers to cancel - * - * cancel a range of PIO buffers, used when they might be armed, but - * not triggered. Used at init to ensure buffer state, and also user - * process close, in case it died while writing to a PIO buffer - * Also after errors. - */ -void ipath_disarm_piobufs(struct ipath_devdata *dd, unsigned first, - unsigned cnt) -{ - unsigned i, last = first + cnt; - unsigned long flags; - - ipath_cdbg(PKT, "disarm %u PIObufs first=%u\n", cnt, first); - for (i = first; i < last; i++) { - spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); - /* - * The disarm-related bits are write-only, so it - * is ok to OR them in with our copy of sendctrl - * while we hold the lock. - */ - ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, - dd->ipath_sendctrl | INFINIPATH_S_DISARM | - (i << INFINIPATH_S_DISARMPIOBUF_SHIFT)); - /* can't disarm bufs back-to-back per iba7220 spec */ - ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); - spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); - } - /* on some older chips, update may not happen after cancel */ - ipath_force_pio_avail_update(dd); -} - -/** - * ipath_wait_linkstate - wait for an IB link state change to occur - * @dd: the infinipath device - * @state: the state to wait for - * @msecs: the number of milliseconds to wait - * - * wait up to msecs milliseconds for IB link state change to occur for - * now, take the easy polling route. Currently used only by - * ipath_set_linkstate. Returns 0 if state reached, otherwise - * -ETIMEDOUT state can have multiple states set, for any of several - * transitions. - */ -int ipath_wait_linkstate(struct ipath_devdata *dd, u32 state, int msecs) -{ - dd->ipath_state_wanted = state; - wait_event_interruptible_timeout(ipath_state_wait, - (dd->ipath_flags & state), - msecs_to_jiffies(msecs)); - dd->ipath_state_wanted = 0; - - if (!(dd->ipath_flags & state)) { - u64 val; - ipath_cdbg(VERBOSE, "Didn't reach linkstate %s within %u" - " ms\n", - /* test INIT ahead of DOWN, both can be set */ - (state & IPATH_LINKINIT) ? "INIT" : - ((state & IPATH_LINKDOWN) ? "DOWN" : - ((state & IPATH_LINKARMED) ? "ARM" : "ACTIVE")), - msecs); - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus); - ipath_cdbg(VERBOSE, "ibcc=%llx ibcstatus=%llx (%s)\n", - (unsigned long long) ipath_read_kreg64( - dd, dd->ipath_kregs->kr_ibcctrl), - (unsigned long long) val, - ipath_ibcstatus_str[val & dd->ibcs_lts_mask]); - } - return (dd->ipath_flags & state) ? 0 : -ETIMEDOUT; -} - -static void decode_sdma_errs(struct ipath_devdata *dd, ipath_err_t err, - char *buf, size_t blen) -{ - static const struct { - ipath_err_t err; - const char *msg; - } errs[] = { - { INFINIPATH_E_SDMAGENMISMATCH, "SDmaGenMismatch" }, - { INFINIPATH_E_SDMAOUTOFBOUND, "SDmaOutOfBound" }, - { INFINIPATH_E_SDMATAILOUTOFBOUND, "SDmaTailOutOfBound" }, - { INFINIPATH_E_SDMABASE, "SDmaBase" }, - { INFINIPATH_E_SDMA1STDESC, "SDma1stDesc" }, - { INFINIPATH_E_SDMARPYTAG, "SDmaRpyTag" }, - { INFINIPATH_E_SDMADWEN, "SDmaDwEn" }, - { INFINIPATH_E_SDMAMISSINGDW, "SDmaMissingDw" }, - { INFINIPATH_E_SDMAUNEXPDATA, "SDmaUnexpData" }, - { INFINIPATH_E_SDMADESCADDRMISALIGN, "SDmaDescAddrMisalign" }, - { INFINIPATH_E_SENDBUFMISUSE, "SendBufMisuse" }, - { INFINIPATH_E_SDMADISABLED, "SDmaDisabled" }, - }; - int i; - int expected; - size_t bidx = 0; - - for (i = 0; i < ARRAY_SIZE(errs); i++) { - expected = (errs[i].err != INFINIPATH_E_SDMADISABLED) ? 0 : - test_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status); - if ((err & errs[i].err) && !expected) - bidx += snprintf(buf + bidx, blen - bidx, - "%s ", errs[i].msg); - } -} - -/* - * Decode the error status into strings, deciding whether to always - * print * it or not depending on "normal packet errors" vs everything - * else. Return 1 if "real" errors, otherwise 0 if only packet - * errors, so caller can decide what to print with the string. - */ -int ipath_decode_err(struct ipath_devdata *dd, char *buf, size_t blen, - ipath_err_t err) -{ - int iserr = 1; - *buf = '\0'; - if (err & INFINIPATH_E_PKTERRS) { - if (!(err & ~INFINIPATH_E_PKTERRS)) - iserr = 0; // if only packet errors. - if (ipath_debug & __IPATH_ERRPKTDBG) { - if (err & INFINIPATH_E_REBP) - strlcat(buf, "EBP ", blen); - if (err & INFINIPATH_E_RVCRC) - strlcat(buf, "VCRC ", blen); - if (err & INFINIPATH_E_RICRC) { - strlcat(buf, "CRC ", blen); - // clear for check below, so only once - err &= INFINIPATH_E_RICRC; - } - if (err & INFINIPATH_E_RSHORTPKTLEN) - strlcat(buf, "rshortpktlen ", blen); - if (err & INFINIPATH_E_SDROPPEDDATAPKT) - strlcat(buf, "sdroppeddatapkt ", blen); - if (err & INFINIPATH_E_SPKTLEN) - strlcat(buf, "spktlen ", blen); - } - if ((err & INFINIPATH_E_RICRC) && - !(err&(INFINIPATH_E_RVCRC|INFINIPATH_E_REBP))) - strlcat(buf, "CRC ", blen); - if (!iserr) - goto done; - } - if (err & INFINIPATH_E_RHDRLEN) - strlcat(buf, "rhdrlen ", blen); - if (err & INFINIPATH_E_RBADTID) - strlcat(buf, "rbadtid ", blen); - if (err & INFINIPATH_E_RBADVERSION) - strlcat(buf, "rbadversion ", blen); - if (err & INFINIPATH_E_RHDR) - strlcat(buf, "rhdr ", blen); - if (err & INFINIPATH_E_SENDSPECIALTRIGGER) - strlcat(buf, "sendspecialtrigger ", blen); - if (err & INFINIPATH_E_RLONGPKTLEN) - strlcat(buf, "rlongpktlen ", blen); - if (err & INFINIPATH_E_RMAXPKTLEN) - strlcat(buf, "rmaxpktlen ", blen); - if (err & INFINIPATH_E_RMINPKTLEN) - strlcat(buf, "rminpktlen ", blen); - if (err & INFINIPATH_E_SMINPKTLEN) - strlcat(buf, "sminpktlen ", blen); - if (err & INFINIPATH_E_RFORMATERR) - strlcat(buf, "rformaterr ", blen); - if (err & INFINIPATH_E_RUNSUPVL) - strlcat(buf, "runsupvl ", blen); - if (err & INFINIPATH_E_RUNEXPCHAR) - strlcat(buf, "runexpchar ", blen); - if (err & INFINIPATH_E_RIBFLOW) - strlcat(buf, "ribflow ", blen); - if (err & INFINIPATH_E_SUNDERRUN) - strlcat(buf, "sunderrun ", blen); - if (err & INFINIPATH_E_SPIOARMLAUNCH) - strlcat(buf, "spioarmlaunch ", blen); - if (err & INFINIPATH_E_SUNEXPERRPKTNUM) - strlcat(buf, "sunexperrpktnum ", blen); - if (err & INFINIPATH_E_SDROPPEDSMPPKT) - strlcat(buf, "sdroppedsmppkt ", blen); - if (err & INFINIPATH_E_SMAXPKTLEN) - strlcat(buf, "smaxpktlen ", blen); - if (err & INFINIPATH_E_SUNSUPVL) - strlcat(buf, "sunsupVL ", blen); - if (err & INFINIPATH_E_INVALIDADDR) - strlcat(buf, "invalidaddr ", blen); - if (err & INFINIPATH_E_RRCVEGRFULL) - strlcat(buf, "rcvegrfull ", blen); - if (err & INFINIPATH_E_RRCVHDRFULL) - strlcat(buf, "rcvhdrfull ", blen); - if (err & INFINIPATH_E_IBSTATUSCHANGED) - strlcat(buf, "ibcstatuschg ", blen); - if (err & INFINIPATH_E_RIBLOSTLINK) - strlcat(buf, "riblostlink ", blen); - if (err & INFINIPATH_E_HARDWARE) - strlcat(buf, "hardware ", blen); - if (err & INFINIPATH_E_RESET) - strlcat(buf, "reset ", blen); - if (err & INFINIPATH_E_SDMAERRS) - decode_sdma_errs(dd, err, buf, blen); - if (err & INFINIPATH_E_INVALIDEEPCMD) - strlcat(buf, "invalideepromcmd ", blen); -done: - return iserr; -} - -/** - * get_rhf_errstring - decode RHF errors - * @err: the err number - * @msg: the output buffer - * @len: the length of the output buffer - * - * only used one place now, may want more later - */ -static void get_rhf_errstring(u32 err, char *msg, size_t len) -{ - /* if no errors, and so don't need to check what's first */ - *msg = '\0'; - - if (err & INFINIPATH_RHF_H_ICRCERR) - strlcat(msg, "icrcerr ", len); - if (err & INFINIPATH_RHF_H_VCRCERR) - strlcat(msg, "vcrcerr ", len); - if (err & INFINIPATH_RHF_H_PARITYERR) - strlcat(msg, "parityerr ", len); - if (err & INFINIPATH_RHF_H_LENERR) - strlcat(msg, "lenerr ", len); - if (err & INFINIPATH_RHF_H_MTUERR) - strlcat(msg, "mtuerr ", len); - if (err & INFINIPATH_RHF_H_IHDRERR) - /* infinipath hdr checksum error */ - strlcat(msg, "ipathhdrerr ", len); - if (err & INFINIPATH_RHF_H_TIDERR) - strlcat(msg, "tiderr ", len); - if (err & INFINIPATH_RHF_H_MKERR) - /* bad port, offset, etc. */ - strlcat(msg, "invalid ipathhdr ", len); - if (err & INFINIPATH_RHF_H_IBERR) - strlcat(msg, "iberr ", len); - if (err & INFINIPATH_RHF_L_SWA) - strlcat(msg, "swA ", len); - if (err & INFINIPATH_RHF_L_SWB) - strlcat(msg, "swB ", len); -} - -/** - * ipath_get_egrbuf - get an eager buffer - * @dd: the infinipath device - * @bufnum: the eager buffer to get - * - * must only be called if ipath_pd[port] is known to be allocated - */ -static inline void *ipath_get_egrbuf(struct ipath_devdata *dd, u32 bufnum) -{ - return dd->ipath_port0_skbinfo ? - (void *) dd->ipath_port0_skbinfo[bufnum].skb->data : NULL; -} - -/** - * ipath_alloc_skb - allocate an skb and buffer with possible constraints - * @dd: the infinipath device - * @gfp_mask: the sk_buff SFP mask - */ -struct sk_buff *ipath_alloc_skb(struct ipath_devdata *dd, - gfp_t gfp_mask) -{ - struct sk_buff *skb; - u32 len; - - /* - * Only fully supported way to handle this is to allocate lots - * extra, align as needed, and then do skb_reserve(). That wastes - * a lot of memory... I'll have to hack this into infinipath_copy - * also. - */ - - /* - * We need 2 extra bytes for ipath_ether data sent in the - * key header. In order to keep everything dword aligned, - * we'll reserve 4 bytes. - */ - len = dd->ipath_ibmaxlen + 4; - - if (dd->ipath_flags & IPATH_4BYTE_TID) { - /* We need a 2KB multiple alignment, and there is no way - * to do it except to allocate extra and then skb_reserve - * enough to bring it up to the right alignment. - */ - len += 2047; - } - - skb = __dev_alloc_skb(len, gfp_mask); - if (!skb) { - ipath_dev_err(dd, "Failed to allocate skbuff, length %u\n", - len); - goto bail; - } - - skb_reserve(skb, 4); - - if (dd->ipath_flags & IPATH_4BYTE_TID) { - u32 una = (unsigned long)skb->data & 2047; - if (una) - skb_reserve(skb, 2048 - una); - } - -bail: - return skb; -} - -static void ipath_rcv_hdrerr(struct ipath_devdata *dd, - u32 eflags, - u32 l, - u32 etail, - __le32 *rhf_addr, - struct ipath_message_header *hdr) -{ - char emsg[128]; - - get_rhf_errstring(eflags, emsg, sizeof emsg); - ipath_cdbg(PKT, "RHFerrs %x hdrqtail=%x typ=%u " - "tlen=%x opcode=%x egridx=%x: %s\n", - eflags, l, - ipath_hdrget_rcv_type(rhf_addr), - ipath_hdrget_length_in_bytes(rhf_addr), - be32_to_cpu(hdr->bth[0]) >> 24, - etail, emsg); - - /* Count local link integrity errors. */ - if (eflags & (INFINIPATH_RHF_H_ICRCERR | INFINIPATH_RHF_H_VCRCERR)) { - u8 n = (dd->ipath_ibcctrl >> - INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT) & - INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK; - - if (++dd->ipath_lli_counter > n) { - dd->ipath_lli_counter = 0; - dd->ipath_lli_errors++; - } - } -} - -/* - * ipath_kreceive - receive a packet - * @pd: the infinipath port - * - * called from interrupt handler for errors or receive interrupt - */ -void ipath_kreceive(struct ipath_portdata *pd) -{ - struct ipath_devdata *dd = pd->port_dd; - __le32 *rhf_addr; - void *ebuf; - const u32 rsize = dd->ipath_rcvhdrentsize; /* words */ - const u32 maxcnt = dd->ipath_rcvhdrcnt * rsize; /* words */ - u32 etail = -1, l, hdrqtail; - struct ipath_message_header *hdr; - u32 eflags, i, etype, tlen, pkttot = 0, updegr = 0, reloop = 0; - static u64 totcalls; /* stats, may eventually remove */ - int last; - - l = pd->port_head; - rhf_addr = (__le32 *) pd->port_rcvhdrq + l + dd->ipath_rhf_offset; - if (dd->ipath_flags & IPATH_NODMA_RTAIL) { - u32 seq = ipath_hdrget_seq(rhf_addr); - - if (seq != pd->port_seq_cnt) - goto bail; - hdrqtail = 0; - } else { - hdrqtail = ipath_get_rcvhdrtail(pd); - if (l == hdrqtail) - goto bail; - smp_rmb(); - } - -reloop: - for (last = 0, i = 1; !last; i += !last) { - hdr = dd->ipath_f_get_msgheader(dd, rhf_addr); - eflags = ipath_hdrget_err_flags(rhf_addr); - etype = ipath_hdrget_rcv_type(rhf_addr); - /* total length */ - tlen = ipath_hdrget_length_in_bytes(rhf_addr); - ebuf = NULL; - if ((dd->ipath_flags & IPATH_NODMA_RTAIL) ? - ipath_hdrget_use_egr_buf(rhf_addr) : - (etype != RCVHQ_RCV_TYPE_EXPECTED)) { - /* - * It turns out that the chip uses an eager buffer - * for all non-expected packets, whether it "needs" - * one or not. So always get the index, but don't - * set ebuf (so we try to copy data) unless the - * length requires it. - */ - etail = ipath_hdrget_index(rhf_addr); - updegr = 1; - if (tlen > sizeof(*hdr) || - etype == RCVHQ_RCV_TYPE_NON_KD) - ebuf = ipath_get_egrbuf(dd, etail); - } - - /* - * both tiderr and ipathhdrerr are set for all plain IB - * packets; only ipathhdrerr should be set. - */ - - if (etype != RCVHQ_RCV_TYPE_NON_KD && - etype != RCVHQ_RCV_TYPE_ERROR && - ipath_hdrget_ipath_ver(hdr->iph.ver_port_tid_offset) != - IPS_PROTO_VERSION) - ipath_cdbg(PKT, "Bad InfiniPath protocol version " - "%x\n", etype); - - if (unlikely(eflags)) - ipath_rcv_hdrerr(dd, eflags, l, etail, rhf_addr, hdr); - else if (etype == RCVHQ_RCV_TYPE_NON_KD) { - ipath_ib_rcv(dd->verbs_dev, (u32 *)hdr, ebuf, tlen); - if (dd->ipath_lli_counter) - dd->ipath_lli_counter--; - } else if (etype == RCVHQ_RCV_TYPE_EAGER) { - u8 opcode = be32_to_cpu(hdr->bth[0]) >> 24; - u32 qp = be32_to_cpu(hdr->bth[1]) & 0xffffff; - ipath_cdbg(PKT, "typ %x, opcode %x (eager, " - "qp=%x), len %x; ignored\n", - etype, opcode, qp, tlen); - } else if (etype == RCVHQ_RCV_TYPE_EXPECTED) { - ipath_dbg("Bug: Expected TID, opcode %x; ignored\n", - be32_to_cpu(hdr->bth[0]) >> 24); - } else { - /* - * error packet, type of error unknown. - * Probably type 3, but we don't know, so don't - * even try to print the opcode, etc. - * Usually caused by a "bad packet", that has no - * BTH, when the LRH says it should. - */ - ipath_cdbg(ERRPKT, "Error Pkt, but no eflags! egrbuf" - " %x, len %x hdrq+%x rhf: %Lx\n", - etail, tlen, l, (unsigned long long) - le64_to_cpu(*(__le64 *) rhf_addr)); - if (ipath_debug & __IPATH_ERRPKTDBG) { - u32 j, *d, dw = rsize-2; - if (rsize > (tlen>>2)) - dw = tlen>>2; - d = (u32 *)hdr; - printk(KERN_DEBUG "EPkt rcvhdr(%x dw):\n", - dw); - for (j = 0; j < dw; j++) - printk(KERN_DEBUG "%8x%s", d[j], - (j%8) == 7 ? "\n" : " "); - printk(KERN_DEBUG ".\n"); - } - } - l += rsize; - if (l >= maxcnt) - l = 0; - rhf_addr = (__le32 *) pd->port_rcvhdrq + - l + dd->ipath_rhf_offset; - if (dd->ipath_flags & IPATH_NODMA_RTAIL) { - u32 seq = ipath_hdrget_seq(rhf_addr); - - if (++pd->port_seq_cnt > 13) - pd->port_seq_cnt = 1; - if (seq != pd->port_seq_cnt) - last = 1; - } else if (l == hdrqtail) { - last = 1; - } - /* - * update head regs on last packet, and every 16 packets. - * Reduce bus traffic, while still trying to prevent - * rcvhdrq overflows, for when the queue is nearly full - */ - if (last || !(i & 0xf)) { - u64 lval = l; - - /* request IBA6120 and 7220 interrupt only on last */ - if (last) - lval |= dd->ipath_rhdrhead_intr_off; - ipath_write_ureg(dd, ur_rcvhdrhead, lval, - pd->port_port); - if (updegr) { - ipath_write_ureg(dd, ur_rcvegrindexhead, - etail, pd->port_port); - updegr = 0; - } - } - } - - if (!dd->ipath_rhdrhead_intr_off && !reloop && - !(dd->ipath_flags & IPATH_NODMA_RTAIL)) { - /* IBA6110 workaround; we can have a race clearing chip - * interrupt with another interrupt about to be delivered, - * and can clear it before it is delivered on the GPIO - * workaround. By doing the extra check here for the - * in-memory tail register updating while we were doing - * earlier packets, we "almost" guarantee we have covered - * that case. - */ - u32 hqtail = ipath_get_rcvhdrtail(pd); - if (hqtail != hdrqtail) { - hdrqtail = hqtail; - reloop = 1; /* loop 1 extra time at most */ - goto reloop; - } - } - - pkttot += i; - - pd->port_head = l; - - if (pkttot > ipath_stats.sps_maxpkts_call) - ipath_stats.sps_maxpkts_call = pkttot; - ipath_stats.sps_port0pkts += pkttot; - ipath_stats.sps_avgpkts_call = - ipath_stats.sps_port0pkts / ++totcalls; - -bail:; -} - -/** - * ipath_update_pio_bufs - update shadow copy of the PIO availability map - * @dd: the infinipath device - * - * called whenever our local copy indicates we have run out of send buffers - * NOTE: This can be called from interrupt context by some code - * and from non-interrupt context by ipath_getpiobuf(). - */ - -static void ipath_update_pio_bufs(struct ipath_devdata *dd) -{ - unsigned long flags; - int i; - const unsigned piobregs = (unsigned)dd->ipath_pioavregs; - - /* If the generation (check) bits have changed, then we update the - * busy bit for the corresponding PIO buffer. This algorithm will - * modify positions to the value they already have in some cases - * (i.e., no change), but it's faster than changing only the bits - * that have changed. - * - * We would like to do this atomicly, to avoid spinlocks in the - * critical send path, but that's not really possible, given the - * type of changes, and that this routine could be called on - * multiple cpu's simultaneously, so we lock in this routine only, - * to avoid conflicting updates; all we change is the shadow, and - * it's a single 64 bit memory location, so by definition the update - * is atomic in terms of what other cpu's can see in testing the - * bits. The spin_lock overhead isn't too bad, since it only - * happens when all buffers are in use, so only cpu overhead, not - * latency or bandwidth is affected. - */ - if (!dd->ipath_pioavailregs_dma) { - ipath_dbg("Update shadow pioavail, but regs_dma NULL!\n"); - return; - } - if (ipath_debug & __IPATH_VERBDBG) { - /* only if packet debug and verbose */ - volatile __le64 *dma = dd->ipath_pioavailregs_dma; - unsigned long *shadow = dd->ipath_pioavailshadow; - - ipath_cdbg(PKT, "Refill avail, dma0=%llx shad0=%lx, " - "d1=%llx s1=%lx, d2=%llx s2=%lx, d3=%llx " - "s3=%lx\n", - (unsigned long long) le64_to_cpu(dma[0]), - shadow[0], - (unsigned long long) le64_to_cpu(dma[1]), - shadow[1], - (unsigned long long) le64_to_cpu(dma[2]), - shadow[2], - (unsigned long long) le64_to_cpu(dma[3]), - shadow[3]); - if (piobregs > 4) - ipath_cdbg( - PKT, "2nd group, dma4=%llx shad4=%lx, " - "d5=%llx s5=%lx, d6=%llx s6=%lx, " - "d7=%llx s7=%lx\n", - (unsigned long long) le64_to_cpu(dma[4]), - shadow[4], - (unsigned long long) le64_to_cpu(dma[5]), - shadow[5], - (unsigned long long) le64_to_cpu(dma[6]), - shadow[6], - (unsigned long long) le64_to_cpu(dma[7]), - shadow[7]); - } - spin_lock_irqsave(&ipath_pioavail_lock, flags); - for (i = 0; i < piobregs; i++) { - u64 pchbusy, pchg, piov, pnew; - /* - * Chip Errata: bug 6641; even and odd qwords>3 are swapped - */ - if (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) - piov = le64_to_cpu(dd->ipath_pioavailregs_dma[i ^ 1]); - else - piov = le64_to_cpu(dd->ipath_pioavailregs_dma[i]); - pchg = dd->ipath_pioavailkernel[i] & - ~(dd->ipath_pioavailshadow[i] ^ piov); - pchbusy = pchg << INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT; - if (pchg && (pchbusy & dd->ipath_pioavailshadow[i])) { - pnew = dd->ipath_pioavailshadow[i] & ~pchbusy; - pnew |= piov & pchbusy; - dd->ipath_pioavailshadow[i] = pnew; - } - } - spin_unlock_irqrestore(&ipath_pioavail_lock, flags); -} - -/* - * used to force update of pioavailshadow if we can't get a pio buffer. - * Needed primarily due to exitting freeze mode after recovering - * from errors. Done lazily, because it's safer (known to not - * be writing pio buffers). - */ -static void ipath_reset_availshadow(struct ipath_devdata *dd) -{ - int i, im; - unsigned long flags; - - spin_lock_irqsave(&ipath_pioavail_lock, flags); - for (i = 0; i < dd->ipath_pioavregs; i++) { - u64 val, oldval; - /* deal with 6110 chip bug on high register #s */ - im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ? - i ^ 1 : i; - val = le64_to_cpu(dd->ipath_pioavailregs_dma[im]); - /* - * busy out the buffers not in the kernel avail list, - * without changing the generation bits. - */ - oldval = dd->ipath_pioavailshadow[i]; - dd->ipath_pioavailshadow[i] = val | - ((~dd->ipath_pioavailkernel[i] << - INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT) & - 0xaaaaaaaaaaaaaaaaULL); /* All BUSY bits in qword */ - if (oldval != dd->ipath_pioavailshadow[i]) - ipath_dbg("shadow[%d] was %Lx, now %lx\n", - i, (unsigned long long) oldval, - dd->ipath_pioavailshadow[i]); - } - spin_unlock_irqrestore(&ipath_pioavail_lock, flags); -} - -/** - * ipath_setrcvhdrsize - set the receive header size - * @dd: the infinipath device - * @rhdrsize: the receive header size - * - * called from user init code, and also layered driver init - */ -int ipath_setrcvhdrsize(struct ipath_devdata *dd, unsigned rhdrsize) -{ - int ret = 0; - - if (dd->ipath_flags & IPATH_RCVHDRSZ_SET) { - if (dd->ipath_rcvhdrsize != rhdrsize) { - dev_info(&dd->pcidev->dev, - "Error: can't set protocol header " - "size %u, already %u\n", - rhdrsize, dd->ipath_rcvhdrsize); - ret = -EAGAIN; - } else - ipath_cdbg(VERBOSE, "Reuse same protocol header " - "size %u\n", dd->ipath_rcvhdrsize); - } else if (rhdrsize > (dd->ipath_rcvhdrentsize - - (sizeof(u64) / sizeof(u32)))) { - ipath_dbg("Error: can't set protocol header size %u " - "(> max %u)\n", rhdrsize, - dd->ipath_rcvhdrentsize - - (u32) (sizeof(u64) / sizeof(u32))); - ret = -EOVERFLOW; - } else { - dd->ipath_flags |= IPATH_RCVHDRSZ_SET; - dd->ipath_rcvhdrsize = rhdrsize; - ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrsize, - dd->ipath_rcvhdrsize); - ipath_cdbg(VERBOSE, "Set protocol header size to %u\n", - dd->ipath_rcvhdrsize); - } - return ret; -} - -/* - * debugging code and stats updates if no pio buffers available. - */ -static noinline void no_pio_bufs(struct ipath_devdata *dd) -{ - unsigned long *shadow = dd->ipath_pioavailshadow; - __le64 *dma = (__le64 *)dd->ipath_pioavailregs_dma; - - dd->ipath_upd_pio_shadow = 1; - - /* - * not atomic, but if we lose a stat count in a while, that's OK - */ - ipath_stats.sps_nopiobufs++; - if (!(++dd->ipath_consec_nopiobuf % 100000)) { - ipath_force_pio_avail_update(dd); /* at start */ - ipath_dbg("%u tries no piobufavail ts%lx; dmacopy: " - "%llx %llx %llx %llx\n" - "ipath shadow: %lx %lx %lx %lx\n", - dd->ipath_consec_nopiobuf, - (unsigned long)get_cycles(), - (unsigned long long) le64_to_cpu(dma[0]), - (unsigned long long) le64_to_cpu(dma[1]), - (unsigned long long) le64_to_cpu(dma[2]), - (unsigned long long) le64_to_cpu(dma[3]), - shadow[0], shadow[1], shadow[2], shadow[3]); - /* - * 4 buffers per byte, 4 registers above, cover rest - * below - */ - if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) > - (sizeof(shadow[0]) * 4 * 4)) - ipath_dbg("2nd group: dmacopy: " - "%llx %llx %llx %llx\n" - "ipath shadow: %lx %lx %lx %lx\n", - (unsigned long long)le64_to_cpu(dma[4]), - (unsigned long long)le64_to_cpu(dma[5]), - (unsigned long long)le64_to_cpu(dma[6]), - (unsigned long long)le64_to_cpu(dma[7]), - shadow[4], shadow[5], shadow[6], shadow[7]); - - /* at end, so update likely happened */ - ipath_reset_availshadow(dd); - } -} - -/* - * common code for normal driver pio buffer allocation, and reserved - * allocation. - * - * do appropriate marking as busy, etc. - * returns buffer number if one found (>=0), negative number is error. - */ -static u32 __iomem *ipath_getpiobuf_range(struct ipath_devdata *dd, - u32 *pbufnum, u32 first, u32 last, u32 firsti) -{ - int i, j, updated = 0; - unsigned piobcnt; - unsigned long flags; - unsigned long *shadow = dd->ipath_pioavailshadow; - u32 __iomem *buf; - - piobcnt = last - first; - if (dd->ipath_upd_pio_shadow) { - /* - * Minor optimization. If we had no buffers on last call, - * start out by doing the update; continue and do scan even - * if no buffers were updated, to be paranoid - */ - ipath_update_pio_bufs(dd); - updated++; - i = first; - } else - i = firsti; -rescan: - /* - * while test_and_set_bit() is atomic, we do that and then the - * change_bit(), and the pair is not. See if this is the cause - * of the remaining armlaunch errors. - */ - spin_lock_irqsave(&ipath_pioavail_lock, flags); - for (j = 0; j < piobcnt; j++, i++) { - if (i >= last) - i = first; - if (__test_and_set_bit((2 * i) + 1, shadow)) - continue; - /* flip generation bit */ - __change_bit(2 * i, shadow); - break; - } - spin_unlock_irqrestore(&ipath_pioavail_lock, flags); - - if (j == piobcnt) { - if (!updated) { - /* - * first time through; shadow exhausted, but may be - * buffers available, try an update and then rescan. - */ - ipath_update_pio_bufs(dd); - updated++; - i = first; - goto rescan; - } else if (updated == 1 && piobcnt <= - ((dd->ipath_sendctrl - >> INFINIPATH_S_UPDTHRESH_SHIFT) & - INFINIPATH_S_UPDTHRESH_MASK)) { - /* - * for chips supporting and using the update - * threshold we need to force an update of the - * in-memory copy if the count is less than the - * thershold, then check one more time. - */ - ipath_force_pio_avail_update(dd); - ipath_update_pio_bufs(dd); - updated++; - i = first; - goto rescan; - } - - no_pio_bufs(dd); - buf = NULL; - } else { - if (i < dd->ipath_piobcnt2k) - buf = (u32 __iomem *) (dd->ipath_pio2kbase + - i * dd->ipath_palign); - else - buf = (u32 __iomem *) - (dd->ipath_pio4kbase + - (i - dd->ipath_piobcnt2k) * dd->ipath_4kalign); - if (pbufnum) - *pbufnum = i; - } - - return buf; -} - -/** - * ipath_getpiobuf - find an available pio buffer - * @dd: the infinipath device - * @plen: the size of the PIO buffer needed in 32-bit words - * @pbufnum: the buffer number is placed here - */ -u32 __iomem *ipath_getpiobuf(struct ipath_devdata *dd, u32 plen, u32 *pbufnum) -{ - u32 __iomem *buf; - u32 pnum, nbufs; - u32 first, lasti; - - if (plen + 1 >= IPATH_SMALLBUF_DWORDS) { - first = dd->ipath_piobcnt2k; - lasti = dd->ipath_lastpioindexl; - } else { - first = 0; - lasti = dd->ipath_lastpioindex; - } - nbufs = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k; - buf = ipath_getpiobuf_range(dd, &pnum, first, nbufs, lasti); - - if (buf) { - /* - * Set next starting place. It's just an optimization, - * it doesn't matter who wins on this, so no locking - */ - if (plen + 1 >= IPATH_SMALLBUF_DWORDS) - dd->ipath_lastpioindexl = pnum + 1; - else - dd->ipath_lastpioindex = pnum + 1; - if (dd->ipath_upd_pio_shadow) - dd->ipath_upd_pio_shadow = 0; - if (dd->ipath_consec_nopiobuf) - dd->ipath_consec_nopiobuf = 0; - ipath_cdbg(VERBOSE, "Return piobuf%u %uk @ %p\n", - pnum, (pnum < dd->ipath_piobcnt2k) ? 2 : 4, buf); - if (pbufnum) - *pbufnum = pnum; - - } - return buf; -} - -/** - * ipath_chg_pioavailkernel - change which send buffers are available for kernel - * @dd: the infinipath device - * @start: the starting send buffer number - * @len: the number of send buffers - * @avail: true if the buffers are available for kernel use, false otherwise - */ -void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start, - unsigned len, int avail) -{ - unsigned long flags; - unsigned end, cnt = 0; - - /* There are two bits per send buffer (busy and generation) */ - start *= 2; - end = start + len * 2; - - spin_lock_irqsave(&ipath_pioavail_lock, flags); - /* Set or clear the busy bit in the shadow. */ - while (start < end) { - if (avail) { - unsigned long dma; - int i, im; - /* - * the BUSY bit will never be set, because we disarm - * the user buffers before we hand them back to the - * kernel. We do have to make sure the generation - * bit is set correctly in shadow, since it could - * have changed many times while allocated to user. - * We can't use the bitmap functions on the full - * dma array because it is always little-endian, so - * we have to flip to host-order first. - * BITS_PER_LONG is slightly wrong, since it's - * always 64 bits per register in chip... - * We only work on 64 bit kernels, so that's OK. - */ - /* deal with 6110 chip bug on high register #s */ - i = start / BITS_PER_LONG; - im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ? - i ^ 1 : i; - __clear_bit(INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT - + start, dd->ipath_pioavailshadow); - dma = (unsigned long) le64_to_cpu( - dd->ipath_pioavailregs_dma[im]); - if (test_bit((INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT - + start) % BITS_PER_LONG, &dma)) - __set_bit(INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT - + start, dd->ipath_pioavailshadow); - else - __clear_bit(INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT - + start, dd->ipath_pioavailshadow); - __set_bit(start, dd->ipath_pioavailkernel); - } else { - __set_bit(start + INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT, - dd->ipath_pioavailshadow); - __clear_bit(start, dd->ipath_pioavailkernel); - } - start += 2; - } - - if (dd->ipath_pioupd_thresh) { - end = 2 * (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k); - cnt = bitmap_weight(dd->ipath_pioavailkernel, end); - } - spin_unlock_irqrestore(&ipath_pioavail_lock, flags); - - /* - * When moving buffers from kernel to user, if number assigned to - * the user is less than the pio update threshold, and threshold - * is supported (cnt was computed > 0), drop the update threshold - * so we update at least once per allocated number of buffers. - * In any case, if the kernel buffers are less than the threshold, - * drop the threshold. We don't bother increasing it, having once - * decreased it, since it would typically just cycle back and forth. - * If we don't decrease below buffers in use, we can wait a long - * time for an update, until some other context uses PIO buffers. - */ - if (!avail && len < cnt) - cnt = len; - if (cnt < dd->ipath_pioupd_thresh) { - dd->ipath_pioupd_thresh = cnt; - ipath_dbg("Decreased pio update threshold to %u\n", - dd->ipath_pioupd_thresh); - spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); - dd->ipath_sendctrl &= ~(INFINIPATH_S_UPDTHRESH_MASK - << INFINIPATH_S_UPDTHRESH_SHIFT); - dd->ipath_sendctrl |= dd->ipath_pioupd_thresh - << INFINIPATH_S_UPDTHRESH_SHIFT; - ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, - dd->ipath_sendctrl); - spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); - } -} - -/** - * ipath_create_rcvhdrq - create a receive header queue - * @dd: the infinipath device - * @pd: the port data - * - * this must be contiguous memory (from an i/o perspective), and must be - * DMA'able (which means for some systems, it will go through an IOMMU, - * or be forced into a low address range). - */ -int ipath_create_rcvhdrq(struct ipath_devdata *dd, - struct ipath_portdata *pd) -{ - int ret = 0; - - if (!pd->port_rcvhdrq) { - dma_addr_t phys_hdrqtail; - gfp_t gfp_flags = GFP_USER | __GFP_COMP; - int amt = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize * - sizeof(u32), PAGE_SIZE); - - pd->port_rcvhdrq = dma_alloc_coherent( - &dd->pcidev->dev, amt, &pd->port_rcvhdrq_phys, - gfp_flags); - - if (!pd->port_rcvhdrq) { - ipath_dev_err(dd, "attempt to allocate %d bytes " - "for port %u rcvhdrq failed\n", - amt, pd->port_port); - ret = -ENOMEM; - goto bail; - } - - if (!(dd->ipath_flags & IPATH_NODMA_RTAIL)) { - pd->port_rcvhdrtail_kvaddr = dma_alloc_coherent( - &dd->pcidev->dev, PAGE_SIZE, &phys_hdrqtail, - GFP_KERNEL); - if (!pd->port_rcvhdrtail_kvaddr) { - ipath_dev_err(dd, "attempt to allocate 1 page " - "for port %u rcvhdrqtailaddr " - "failed\n", pd->port_port); - ret = -ENOMEM; - dma_free_coherent(&dd->pcidev->dev, amt, - pd->port_rcvhdrq, - pd->port_rcvhdrq_phys); - pd->port_rcvhdrq = NULL; - goto bail; - } - pd->port_rcvhdrqtailaddr_phys = phys_hdrqtail; - ipath_cdbg(VERBOSE, "port %d hdrtailaddr, %llx " - "physical\n", pd->port_port, - (unsigned long long) phys_hdrqtail); - } - - pd->port_rcvhdrq_size = amt; - - ipath_cdbg(VERBOSE, "%d pages at %p (phys %lx) size=%lu " - "for port %u rcvhdr Q\n", - amt >> PAGE_SHIFT, pd->port_rcvhdrq, - (unsigned long) pd->port_rcvhdrq_phys, - (unsigned long) pd->port_rcvhdrq_size, - pd->port_port); - } else { - ipath_cdbg(VERBOSE, "reuse port %d rcvhdrq @%p %llx phys; " - "hdrtailaddr@%p %llx physical\n", - pd->port_port, pd->port_rcvhdrq, - (unsigned long long) pd->port_rcvhdrq_phys, - pd->port_rcvhdrtail_kvaddr, (unsigned long long) - pd->port_rcvhdrqtailaddr_phys); - } - /* clear for security and sanity on each use */ - memset(pd->port_rcvhdrq, 0, pd->port_rcvhdrq_size); - if (pd->port_rcvhdrtail_kvaddr) - memset(pd->port_rcvhdrtail_kvaddr, 0, PAGE_SIZE); - - /* - * tell chip each time we init it, even if we are re-using previous - * memory (we zero the register at process close) - */ - ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdrtailaddr, - pd->port_port, pd->port_rcvhdrqtailaddr_phys); - ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr, - pd->port_port, pd->port_rcvhdrq_phys); - -bail: - return ret; -} - - -/* - * Flush all sends that might be in the ready to send state, as well as any - * that are in the process of being sent. Used whenever we need to be - * sure the send side is idle. Cleans up all buffer state by canceling - * all pio buffers, and issuing an abort, which cleans up anything in the - * launch fifo. The cancel is superfluous on some chip versions, but - * it's safer to always do it. - * PIOAvail bits are updated by the chip as if normal send had happened. - */ -void ipath_cancel_sends(struct ipath_devdata *dd, int restore_sendctrl) -{ - unsigned long flags; - - if (dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) { - ipath_cdbg(VERBOSE, "Ignore while in autonegotiation\n"); - goto bail; - } - /* - * If we have SDMA, and it's not disabled, we have to kick off the - * abort state machine, provided we aren't already aborting. - * If we are in the process of aborting SDMA (!DISABLED, but ABORTING), - * we skip the rest of this routine. It is already "in progress" - */ - if (dd->ipath_flags & IPATH_HAS_SEND_DMA) { - int skip_cancel; - unsigned long *statp = &dd->ipath_sdma_status; - - spin_lock_irqsave(&dd->ipath_sdma_lock, flags); - skip_cancel = - test_and_set_bit(IPATH_SDMA_ABORTING, statp) - && !test_bit(IPATH_SDMA_DISABLED, statp); - spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags); - if (skip_cancel) - goto bail; - } - - ipath_dbg("Cancelling all in-progress send buffers\n"); - - /* skip armlaunch errs for a while */ - dd->ipath_lastcancel = jiffies + HZ / 2; - - /* - * The abort bit is auto-clearing. We also don't want pioavail - * update happening during this, and we don't want any other - * sends going out, so turn those off for the duration. We read - * the scratch register to be sure that cancels and the abort - * have taken effect in the chip. Otherwise two parts are same - * as ipath_force_pio_avail_update() - */ - spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); - dd->ipath_sendctrl &= ~(INFINIPATH_S_PIOBUFAVAILUPD - | INFINIPATH_S_PIOENABLE); - ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, - dd->ipath_sendctrl | INFINIPATH_S_ABORT); - ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); - spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); - - /* disarm all send buffers */ - ipath_disarm_piobufs(dd, 0, - dd->ipath_piobcnt2k + dd->ipath_piobcnt4k); - - if (dd->ipath_flags & IPATH_HAS_SEND_DMA) - set_bit(IPATH_SDMA_DISARMED, &dd->ipath_sdma_status); - - if (restore_sendctrl) { - /* else done by caller later if needed */ - spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); - dd->ipath_sendctrl |= INFINIPATH_S_PIOBUFAVAILUPD | - INFINIPATH_S_PIOENABLE; - ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, - dd->ipath_sendctrl); - /* and again, be sure all have hit the chip */ - ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); - spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); - } - - if ((dd->ipath_flags & IPATH_HAS_SEND_DMA) && - !test_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status) && - test_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status)) { - spin_lock_irqsave(&dd->ipath_sdma_lock, flags); - /* only wait so long for intr */ - dd->ipath_sdma_abort_intr_timeout = jiffies + HZ; - dd->ipath_sdma_reset_wait = 200; - if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status)) - tasklet_hi_schedule(&dd->ipath_sdma_abort_task); - spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags); - } -bail:; -} - -/* - * Force an update of in-memory copy of the pioavail registers, when - * needed for any of a variety of reasons. We read the scratch register - * to make it highly likely that the update will have happened by the - * time we return. If already off (as in cancel_sends above), this - * routine is a nop, on the assumption that the caller will "do the - * right thing". - */ -void ipath_force_pio_avail_update(struct ipath_devdata *dd) -{ - unsigned long flags; - - spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); - if (dd->ipath_sendctrl & INFINIPATH_S_PIOBUFAVAILUPD) { - ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, - dd->ipath_sendctrl & ~INFINIPATH_S_PIOBUFAVAILUPD); - ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); - ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, - dd->ipath_sendctrl); - ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); - } - spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); -} - -static void ipath_set_ib_lstate(struct ipath_devdata *dd, int linkcmd, - int linitcmd) -{ - u64 mod_wd; - static const char *what[4] = { - [0] = "NOP", - [INFINIPATH_IBCC_LINKCMD_DOWN] = "DOWN", - [INFINIPATH_IBCC_LINKCMD_ARMED] = "ARMED", - [INFINIPATH_IBCC_LINKCMD_ACTIVE] = "ACTIVE" - }; - - if (linitcmd == INFINIPATH_IBCC_LINKINITCMD_DISABLE) { - /* - * If we are told to disable, note that so link-recovery - * code does not attempt to bring us back up. - */ - preempt_disable(); - dd->ipath_flags |= IPATH_IB_LINK_DISABLED; - preempt_enable(); - } else if (linitcmd) { - /* - * Any other linkinitcmd will lead to LINKDOWN and then - * to INIT (if all is well), so clear flag to let - * link-recovery code attempt to bring us back up. - */ - preempt_disable(); - dd->ipath_flags &= ~IPATH_IB_LINK_DISABLED; - preempt_enable(); - } - - mod_wd = (linkcmd << dd->ibcc_lc_shift) | - (linitcmd << INFINIPATH_IBCC_LINKINITCMD_SHIFT); - ipath_cdbg(VERBOSE, - "Moving unit %u to %s (initcmd=0x%x), current ltstate is %s\n", - dd->ipath_unit, what[linkcmd], linitcmd, - ipath_ibcstatus_str[ipath_ib_linktrstate(dd, - ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus))]); - - ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, - dd->ipath_ibcctrl | mod_wd); - /* read from chip so write is flushed */ - (void) ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus); -} - -int ipath_set_linkstate(struct ipath_devdata *dd, u8 newstate) -{ - u32 lstate; - int ret; - - switch (newstate) { - case IPATH_IB_LINKDOWN_ONLY: - ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN, 0); - /* don't wait */ - ret = 0; - goto bail; - - case IPATH_IB_LINKDOWN: - ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN, - INFINIPATH_IBCC_LINKINITCMD_POLL); - /* don't wait */ - ret = 0; - goto bail; - - case IPATH_IB_LINKDOWN_SLEEP: - ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN, - INFINIPATH_IBCC_LINKINITCMD_SLEEP); - /* don't wait */ - ret = 0; - goto bail; - - case IPATH_IB_LINKDOWN_DISABLE: - ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN, - INFINIPATH_IBCC_LINKINITCMD_DISABLE); - /* don't wait */ - ret = 0; - goto bail; - - case IPATH_IB_LINKARM: - if (dd->ipath_flags & IPATH_LINKARMED) { - ret = 0; - goto bail; - } - if (!(dd->ipath_flags & - (IPATH_LINKINIT | IPATH_LINKACTIVE))) { - ret = -EINVAL; - goto bail; - } - ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ARMED, 0); - - /* - * Since the port can transition to ACTIVE by receiving - * a non VL 15 packet, wait for either state. - */ - lstate = IPATH_LINKARMED | IPATH_LINKACTIVE; - break; - - case IPATH_IB_LINKACTIVE: - if (dd->ipath_flags & IPATH_LINKACTIVE) { - ret = 0; - goto bail; - } - if (!(dd->ipath_flags & IPATH_LINKARMED)) { - ret = -EINVAL; - goto bail; - } - ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ACTIVE, 0); - lstate = IPATH_LINKACTIVE; - break; - - case IPATH_IB_LINK_LOOPBACK: - dev_info(&dd->pcidev->dev, "Enabling IB local loopback\n"); - dd->ipath_ibcctrl |= INFINIPATH_IBCC_LOOPBACK; - ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, - dd->ipath_ibcctrl); - - /* turn heartbeat off, as it causes loopback to fail */ - dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT, - IPATH_IB_HRTBT_OFF); - /* don't wait */ - ret = 0; - goto bail; - - case IPATH_IB_LINK_EXTERNAL: - dev_info(&dd->pcidev->dev, - "Disabling IB local loopback (normal)\n"); - dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT, - IPATH_IB_HRTBT_ON); - dd->ipath_ibcctrl &= ~INFINIPATH_IBCC_LOOPBACK; - ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, - dd->ipath_ibcctrl); - /* don't wait */ - ret = 0; - goto bail; - - /* - * Heartbeat can be explicitly enabled by the user via - * "hrtbt_enable" "file", and if disabled, trying to enable here - * will have no effect. Implicit changes (heartbeat off when - * loopback on, and vice versa) are included to ease testing. - */ - case IPATH_IB_LINK_HRTBT: - ret = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT, - IPATH_IB_HRTBT_ON); - goto bail; - - case IPATH_IB_LINK_NO_HRTBT: - ret = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT, - IPATH_IB_HRTBT_OFF); - goto bail; - - default: - ipath_dbg("Invalid linkstate 0x%x requested\n", newstate); - ret = -EINVAL; - goto bail; - } - ret = ipath_wait_linkstate(dd, lstate, 2000); - -bail: - return ret; -} - -/** - * ipath_set_mtu - set the MTU - * @dd: the infinipath device - * @arg: the new MTU - * - * we can handle "any" incoming size, the issue here is whether we - * need to restrict our outgoing size. For now, we don't do any - * sanity checking on this, and we don't deal with what happens to - * programs that are already running when the size changes. - * NOTE: changing the MTU will usually cause the IBC to go back to - * link INIT state... - */ -int ipath_set_mtu(struct ipath_devdata *dd, u16 arg) -{ - u32 piosize; - int changed = 0; - int ret; - - /* - * mtu is IB data payload max. It's the largest power of 2 less - * than piosize (or even larger, since it only really controls the - * largest we can receive; we can send the max of the mtu and - * piosize). We check that it's one of the valid IB sizes. - */ - if (arg != 256 && arg != 512 && arg != 1024 && arg != 2048 && - (arg != 4096 || !ipath_mtu4096)) { - ipath_dbg("Trying to set invalid mtu %u, failing\n", arg); - ret = -EINVAL; - goto bail; - } - if (dd->ipath_ibmtu == arg) { - ret = 0; /* same as current */ - goto bail; - } - - piosize = dd->ipath_ibmaxlen; - dd->ipath_ibmtu = arg; - - if (arg >= (piosize - IPATH_PIO_MAXIBHDR)) { - /* Only if it's not the initial value (or reset to it) */ - if (piosize != dd->ipath_init_ibmaxlen) { - if (arg > piosize && arg <= dd->ipath_init_ibmaxlen) - piosize = dd->ipath_init_ibmaxlen; - dd->ipath_ibmaxlen = piosize; - changed = 1; - } - } else if ((arg + IPATH_PIO_MAXIBHDR) != dd->ipath_ibmaxlen) { - piosize = arg + IPATH_PIO_MAXIBHDR; - ipath_cdbg(VERBOSE, "ibmaxlen was 0x%x, setting to 0x%x " - "(mtu 0x%x)\n", dd->ipath_ibmaxlen, piosize, - arg); - dd->ipath_ibmaxlen = piosize; - changed = 1; - } - - if (changed) { - u64 ibc = dd->ipath_ibcctrl, ibdw; - /* - * update our housekeeping variables, and set IBC max - * size, same as init code; max IBC is max we allow in - * buffer, less the qword pbc, plus 1 for ICRC, in dwords - */ - dd->ipath_ibmaxlen = piosize - 2 * sizeof(u32); - ibdw = (dd->ipath_ibmaxlen >> 2) + 1; - ibc &= ~(INFINIPATH_IBCC_MAXPKTLEN_MASK << - dd->ibcc_mpl_shift); - ibc |= ibdw << dd->ibcc_mpl_shift; - dd->ipath_ibcctrl = ibc; - ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, - dd->ipath_ibcctrl); - dd->ipath_f_tidtemplate(dd); - } - - ret = 0; - -bail: - return ret; -} - -int ipath_set_lid(struct ipath_devdata *dd, u32 lid, u8 lmc) -{ - dd->ipath_lid = lid; - dd->ipath_lmc = lmc; - - dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LIDLMC, lid | - (~((1U << lmc) - 1)) << 16); - - dev_info(&dd->pcidev->dev, "We got a lid: 0x%x\n", lid); - - return 0; -} - - -/** - * ipath_write_kreg_port - write a device's per-port 64-bit kernel register - * @dd: the infinipath device - * @regno: the register number to write - * @port: the port containing the register - * @value: the value to write - * - * Registers that vary with the chip implementation constants (port) - * use this routine. - */ -void ipath_write_kreg_port(const struct ipath_devdata *dd, ipath_kreg regno, - unsigned port, u64 value) -{ - u16 where; - - if (port < dd->ipath_portcnt && - (regno == dd->ipath_kregs->kr_rcvhdraddr || - regno == dd->ipath_kregs->kr_rcvhdrtailaddr)) - where = regno + port; - else - where = -1; - - ipath_write_kreg(dd, where, value); -} - -/* - * Following deal with the "obviously simple" task of overriding the state - * of the LEDS, which normally indicate link physical and logical status. - * The complications arise in dealing with different hardware mappings - * and the board-dependent routine being called from interrupts. - * and then there's the requirement to _flash_ them. - */ -#define LED_OVER_FREQ_SHIFT 8 -#define LED_OVER_FREQ_MASK (0xFF<<LED_OVER_FREQ_SHIFT) -/* Below is "non-zero" to force override, but both actual LEDs are off */ -#define LED_OVER_BOTH_OFF (8) - -static void ipath_run_led_override(unsigned long opaque) -{ - struct ipath_devdata *dd = (struct ipath_devdata *)opaque; - int timeoff; - int pidx; - u64 lstate, ltstate, val; - - if (!(dd->ipath_flags & IPATH_INITTED)) - return; - - pidx = dd->ipath_led_override_phase++ & 1; - dd->ipath_led_override = dd->ipath_led_override_vals[pidx]; - timeoff = dd->ipath_led_override_timeoff; - - /* - * below potentially restores the LED values per current status, - * should also possibly setup the traffic-blink register, - * but leave that to per-chip functions. - */ - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus); - ltstate = ipath_ib_linktrstate(dd, val); - lstate = ipath_ib_linkstate(dd, val); - - dd->ipath_f_setextled(dd, lstate, ltstate); - mod_timer(&dd->ipath_led_override_timer, jiffies + timeoff); -} - -void ipath_set_led_override(struct ipath_devdata *dd, unsigned int val) -{ - int timeoff, freq; - - if (!(dd->ipath_flags & IPATH_INITTED)) - return; - - /* First check if we are blinking. If not, use 1HZ polling */ - timeoff = HZ; - freq = (val & LED_OVER_FREQ_MASK) >> LED_OVER_FREQ_SHIFT; - - if (freq) { - /* For blink, set each phase from one nybble of val */ - dd->ipath_led_override_vals[0] = val & 0xF; - dd->ipath_led_override_vals[1] = (val >> 4) & 0xF; - timeoff = (HZ << 4)/freq; - } else { - /* Non-blink set both phases the same. */ - dd->ipath_led_override_vals[0] = val & 0xF; - dd->ipath_led_override_vals[1] = val & 0xF; - } - dd->ipath_led_override_timeoff = timeoff; - - /* - * If the timer has not already been started, do so. Use a "quick" - * timeout so the function will be called soon, to look at our request. - */ - if (atomic_inc_return(&dd->ipath_led_override_timer_active) == 1) { - /* Need to start timer */ - setup_timer(&dd->ipath_led_override_timer, - ipath_run_led_override, (unsigned long)dd); - - dd->ipath_led_override_timer.expires = jiffies + 1; - add_timer(&dd->ipath_led_override_timer); - } else - atomic_dec(&dd->ipath_led_override_timer_active); -} - -/** - * ipath_shutdown_device - shut down a device - * @dd: the infinipath device - * - * This is called to make the device quiet when we are about to - * unload the driver, and also when the device is administratively - * disabled. It does not free any data structures. - * Everything it does has to be setup again by ipath_init_chip(dd,1) - */ -void ipath_shutdown_device(struct ipath_devdata *dd) -{ - unsigned long flags; - - ipath_dbg("Shutting down the device\n"); - - ipath_hol_up(dd); /* make sure user processes aren't suspended */ - - dd->ipath_flags |= IPATH_LINKUNK; - dd->ipath_flags &= ~(IPATH_INITTED | IPATH_LINKDOWN | - IPATH_LINKINIT | IPATH_LINKARMED | - IPATH_LINKACTIVE); - *dd->ipath_statusp &= ~(IPATH_STATUS_IB_CONF | - IPATH_STATUS_IB_READY); - - /* mask interrupts, but not errors */ - ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL); - - dd->ipath_rcvctrl = 0; - ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, - dd->ipath_rcvctrl); - - if (dd->ipath_flags & IPATH_HAS_SEND_DMA) - teardown_sdma(dd); - - /* - * gracefully stop all sends allowing any in progress to trickle out - * first. - */ - spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); - dd->ipath_sendctrl = 0; - ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl); - /* flush it */ - ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); - spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); - - /* - * enough for anything that's going to trickle out to have actually - * done so. - */ - udelay(5); - - dd->ipath_f_setextled(dd, 0, 0); /* make sure LEDs are off */ - - ipath_set_ib_lstate(dd, 0, INFINIPATH_IBCC_LINKINITCMD_DISABLE); - ipath_cancel_sends(dd, 0); - - /* - * we are shutting down, so tell components that care. We don't do - * this on just a link state change, much like ethernet, a cable - * unplug, etc. doesn't change driver state - */ - signal_ib_event(dd, IB_EVENT_PORT_ERR); - - /* disable IBC */ - dd->ipath_control &= ~INFINIPATH_C_LINKENABLE; - ipath_write_kreg(dd, dd->ipath_kregs->kr_control, - dd->ipath_control | INFINIPATH_C_FREEZEMODE); - - /* - * clear SerdesEnable and turn the leds off; do this here because - * we are unloading, so don't count on interrupts to move along - * Turn the LEDs off explicitly for the same reason. - */ - dd->ipath_f_quiet_serdes(dd); - - /* stop all the timers that might still be running */ - del_timer_sync(&dd->ipath_hol_timer); - if (dd->ipath_stats_timer_active) { - del_timer_sync(&dd->ipath_stats_timer); - dd->ipath_stats_timer_active = 0; - } - if (dd->ipath_intrchk_timer.data) { - del_timer_sync(&dd->ipath_intrchk_timer); - dd->ipath_intrchk_timer.data = 0; - } - if (atomic_read(&dd->ipath_led_override_timer_active)) { - del_timer_sync(&dd->ipath_led_override_timer); - atomic_set(&dd->ipath_led_override_timer_active, 0); - } - - /* - * clear all interrupts and errors, so that the next time the driver - * is loaded or device is enabled, we know that whatever is set - * happened while we were unloaded - */ - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, - ~0ULL & ~INFINIPATH_HWE_MEMBISTFAILED); - ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, -1LL); - ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL); - - ipath_cdbg(VERBOSE, "Flush time and errors to EEPROM\n"); - ipath_update_eeprom_log(dd); -} - -/** - * ipath_free_pddata - free a port's allocated data - * @dd: the infinipath device - * @pd: the portdata structure - * - * free up any allocated data for a port - * This should not touch anything that would affect a simultaneous - * re-allocation of port data, because it is called after ipath_mutex - * is released (and can be called from reinit as well). - * It should never change any chip state, or global driver state. - * (The only exception to global state is freeing the port0 port0_skbs.) - */ -void ipath_free_pddata(struct ipath_devdata *dd, struct ipath_portdata *pd) -{ - if (!pd) - return; - - if (pd->port_rcvhdrq) { - ipath_cdbg(VERBOSE, "free closed port %d rcvhdrq @ %p " - "(size=%lu)\n", pd->port_port, pd->port_rcvhdrq, - (unsigned long) pd->port_rcvhdrq_size); - dma_free_coherent(&dd->pcidev->dev, pd->port_rcvhdrq_size, - pd->port_rcvhdrq, pd->port_rcvhdrq_phys); - pd->port_rcvhdrq = NULL; - if (pd->port_rcvhdrtail_kvaddr) { - dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE, - pd->port_rcvhdrtail_kvaddr, - pd->port_rcvhdrqtailaddr_phys); - pd->port_rcvhdrtail_kvaddr = NULL; - } - } - if (pd->port_port && pd->port_rcvegrbuf) { - unsigned e; - - for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) { - void *base = pd->port_rcvegrbuf[e]; - size_t size = pd->port_rcvegrbuf_size; - - ipath_cdbg(VERBOSE, "egrbuf free(%p, %lu), " - "chunk %u/%u\n", base, - (unsigned long) size, - e, pd->port_rcvegrbuf_chunks); - dma_free_coherent(&dd->pcidev->dev, size, - base, pd->port_rcvegrbuf_phys[e]); - } - kfree(pd->port_rcvegrbuf); - pd->port_rcvegrbuf = NULL; - kfree(pd->port_rcvegrbuf_phys); - pd->port_rcvegrbuf_phys = NULL; - pd->port_rcvegrbuf_chunks = 0; - } else if (pd->port_port == 0 && dd->ipath_port0_skbinfo) { - unsigned e; - struct ipath_skbinfo *skbinfo = dd->ipath_port0_skbinfo; - - dd->ipath_port0_skbinfo = NULL; - ipath_cdbg(VERBOSE, "free closed port %d " - "ipath_port0_skbinfo @ %p\n", pd->port_port, - skbinfo); - for (e = 0; e < dd->ipath_p0_rcvegrcnt; e++) - if (skbinfo[e].skb) { - pci_unmap_single(dd->pcidev, skbinfo[e].phys, - dd->ipath_ibmaxlen, - PCI_DMA_FROMDEVICE); - dev_kfree_skb(skbinfo[e].skb); - } - vfree(skbinfo); - } - kfree(pd->port_tid_pg_list); - vfree(pd->subport_uregbase); - vfree(pd->subport_rcvegrbuf); - vfree(pd->subport_rcvhdr_base); - kfree(pd); -} - -static int __init infinipath_init(void) -{ - int ret; - - if (ipath_debug & __IPATH_DBG) - printk(KERN_INFO DRIVER_LOAD_MSG "%s", ib_ipath_version); - - /* - * These must be called before the driver is registered with - * the PCI subsystem. - */ - idr_init(&unit_table); - - ret = pci_register_driver(&ipath_driver); - if (ret < 0) { - printk(KERN_ERR IPATH_DRV_NAME - ": Unable to register driver: error %d\n", -ret); - goto bail_unit; - } - - ret = ipath_init_ipathfs(); - if (ret < 0) { - printk(KERN_ERR IPATH_DRV_NAME ": Unable to create " - "ipathfs: error %d\n", -ret); - goto bail_pci; - } - - goto bail; - -bail_pci: - pci_unregister_driver(&ipath_driver); - -bail_unit: - idr_destroy(&unit_table); - -bail: - return ret; -} - -static void __exit infinipath_cleanup(void) -{ - ipath_exit_ipathfs(); - - ipath_cdbg(VERBOSE, "Unregistering pci driver\n"); - pci_unregister_driver(&ipath_driver); - - idr_destroy(&unit_table); -} - -/** - * ipath_reset_device - reset the chip if possible - * @unit: the device to reset - * - * Whether or not reset is successful, we attempt to re-initialize the chip - * (that is, much like a driver unload/reload). We clear the INITTED flag - * so that the various entry points will fail until we reinitialize. For - * now, we only allow this if no user ports are open that use chip resources - */ -int ipath_reset_device(int unit) -{ - int ret, i; - struct ipath_devdata *dd = ipath_lookup(unit); - unsigned long flags; - - if (!dd) { - ret = -ENODEV; - goto bail; - } - - if (atomic_read(&dd->ipath_led_override_timer_active)) { - /* Need to stop LED timer, _then_ shut off LEDs */ - del_timer_sync(&dd->ipath_led_override_timer); - atomic_set(&dd->ipath_led_override_timer_active, 0); - } - - /* Shut off LEDs after we are sure timer is not running */ - dd->ipath_led_override = LED_OVER_BOTH_OFF; - dd->ipath_f_setextled(dd, 0, 0); - - dev_info(&dd->pcidev->dev, "Reset on unit %u requested\n", unit); - - if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT)) { - dev_info(&dd->pcidev->dev, "Invalid unit number %u or " - "not initialized or not present\n", unit); - ret = -ENXIO; - goto bail; - } - - spin_lock_irqsave(&dd->ipath_uctxt_lock, flags); - if (dd->ipath_pd) - for (i = 1; i < dd->ipath_cfgports; i++) { - if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt) - continue; - spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags); - ipath_dbg("unit %u port %d is in use " - "(PID %u cmd %s), can't reset\n", - unit, i, - pid_nr(dd->ipath_pd[i]->port_pid), - dd->ipath_pd[i]->port_comm); - ret = -EBUSY; - goto bail; - } - spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags); - - if (dd->ipath_flags & IPATH_HAS_SEND_DMA) - teardown_sdma(dd); - - dd->ipath_flags &= ~IPATH_INITTED; - ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL); - ret = dd->ipath_f_reset(dd); - if (ret == 1) { - ipath_dbg("Reinitializing unit %u after reset attempt\n", - unit); - ret = ipath_init_chip(dd, 1); - } else - ret = -EAGAIN; - if (ret) - ipath_dev_err(dd, "Reinitialize unit %u after " - "reset failed with %d\n", unit, ret); - else - dev_info(&dd->pcidev->dev, "Reinitialized unit %u after " - "resetting\n", unit); - -bail: - return ret; -} - -/* - * send a signal to all the processes that have the driver open - * through the normal interfaces (i.e., everything other than diags - * interface). Returns number of signalled processes. - */ -static int ipath_signal_procs(struct ipath_devdata *dd, int sig) -{ - int i, sub, any = 0; - struct pid *pid; - unsigned long flags; - - if (!dd->ipath_pd) - return 0; - - spin_lock_irqsave(&dd->ipath_uctxt_lock, flags); - for (i = 1; i < dd->ipath_cfgports; i++) { - if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt) - continue; - pid = dd->ipath_pd[i]->port_pid; - if (!pid) - continue; - - dev_info(&dd->pcidev->dev, "context %d in use " - "(PID %u), sending signal %d\n", - i, pid_nr(pid), sig); - kill_pid(pid, sig, 1); - any++; - for (sub = 0; sub < INFINIPATH_MAX_SUBPORT; sub++) { - pid = dd->ipath_pd[i]->port_subpid[sub]; - if (!pid) - continue; - dev_info(&dd->pcidev->dev, "sub-context " - "%d:%d in use (PID %u), sending " - "signal %d\n", i, sub, pid_nr(pid), sig); - kill_pid(pid, sig, 1); - any++; - } - } - spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags); - return any; -} - -static void ipath_hol_signal_down(struct ipath_devdata *dd) -{ - if (ipath_signal_procs(dd, SIGSTOP)) - ipath_dbg("Stopped some processes\n"); - ipath_cancel_sends(dd, 1); -} - - -static void ipath_hol_signal_up(struct ipath_devdata *dd) -{ - if (ipath_signal_procs(dd, SIGCONT)) - ipath_dbg("Continued some processes\n"); -} - -/* - * link is down, stop any users processes, and flush pending sends - * to prevent HoL blocking, then start the HoL timer that - * periodically continues, then stop procs, so they can detect - * link down if they want, and do something about it. - * Timer may already be running, so use mod_timer, not add_timer. - */ -void ipath_hol_down(struct ipath_devdata *dd) -{ - dd->ipath_hol_state = IPATH_HOL_DOWN; - ipath_hol_signal_down(dd); - dd->ipath_hol_next = IPATH_HOL_DOWNCONT; - dd->ipath_hol_timer.expires = jiffies + - msecs_to_jiffies(ipath_hol_timeout_ms); - mod_timer(&dd->ipath_hol_timer, dd->ipath_hol_timer.expires); -} - -/* - * link is up, continue any user processes, and ensure timer - * is a nop, if running. Let timer keep running, if set; it - * will nop when it sees the link is up - */ -void ipath_hol_up(struct ipath_devdata *dd) -{ - ipath_hol_signal_up(dd); - dd->ipath_hol_state = IPATH_HOL_UP; -} - -/* - * toggle the running/not running state of user proceses - * to prevent HoL blocking on chip resources, but still allow - * user processes to do link down special case handling. - * Should only be called via the timer - */ -void ipath_hol_event(unsigned long opaque) -{ - struct ipath_devdata *dd = (struct ipath_devdata *)opaque; - - if (dd->ipath_hol_next == IPATH_HOL_DOWNSTOP - && dd->ipath_hol_state != IPATH_HOL_UP) { - dd->ipath_hol_next = IPATH_HOL_DOWNCONT; - ipath_dbg("Stopping processes\n"); - ipath_hol_signal_down(dd); - } else { /* may do "extra" if also in ipath_hol_up() */ - dd->ipath_hol_next = IPATH_HOL_DOWNSTOP; - ipath_dbg("Continuing processes\n"); - ipath_hol_signal_up(dd); - } - if (dd->ipath_hol_state == IPATH_HOL_UP) - ipath_dbg("link's up, don't resched timer\n"); - else { - dd->ipath_hol_timer.expires = jiffies + - msecs_to_jiffies(ipath_hol_timeout_ms); - mod_timer(&dd->ipath_hol_timer, - dd->ipath_hol_timer.expires); - } -} - -int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv) -{ - u64 val; - - if (new_pol_inv > INFINIPATH_XGXS_RX_POL_MASK) - return -1; - if (dd->ipath_rx_pol_inv != new_pol_inv) { - dd->ipath_rx_pol_inv = new_pol_inv; - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig); - val &= ~(INFINIPATH_XGXS_RX_POL_MASK << - INFINIPATH_XGXS_RX_POL_SHIFT); - val |= ((u64)dd->ipath_rx_pol_inv) << - INFINIPATH_XGXS_RX_POL_SHIFT; - ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val); - } - return 0; -} - -/* - * Disable and enable the armlaunch error. Used for PIO bandwidth testing on - * the 7220, which is count-based, rather than trigger-based. Safe for the - * driver check, since it's at init. Not completely safe when used for - * user-mode checking, since some error checking can be lost, but not - * particularly risky, and only has problematic side-effects in the face of - * very buggy user code. There is no reference counting, but that's also - * fine, given the intended use. - */ -void ipath_enable_armlaunch(struct ipath_devdata *dd) -{ - dd->ipath_lasterror &= ~INFINIPATH_E_SPIOARMLAUNCH; - ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, - INFINIPATH_E_SPIOARMLAUNCH); - dd->ipath_errormask |= INFINIPATH_E_SPIOARMLAUNCH; - ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask, - dd->ipath_errormask); -} - -void ipath_disable_armlaunch(struct ipath_devdata *dd) -{ - /* so don't re-enable if already set */ - dd->ipath_maskederrs &= ~INFINIPATH_E_SPIOARMLAUNCH; - dd->ipath_errormask &= ~INFINIPATH_E_SPIOARMLAUNCH; - ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask, - dd->ipath_errormask); -} - -module_init(infinipath_init); -module_exit(infinipath_cleanup); |